Skip to content

L
linux
Commit 0921f1ef authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'cris-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris 

Pull CRIS changes from Jesper Nilsson:
 "Mostly another batch of code removal due to move to standard
  frameworks for CRISv32, initial devicetree configuration for a couple
  of boards, and some small fixes for kgdb and time handling"

* tag 'cris-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: Drop reference to get_cmos_time()
  CRIS: Drop code related to obsolete or unused kconfigs
  cris: time: Cleanup of persistent clock stuff
  cris: re-use helpers to dump data in hex format
  CRIS v32: remove old GPIO and LEDs code
  CRIS v32: remove I2C bitbanging driver
  CRIS v32: add ARTPEC-3 and P1343 device trees
  CRIS v32: dev88: add GPIO, LEDs, RTC, temp sensor
  CRIS: add dt-bindings symlink
  CRIS v32: increase NR_IRQS
  cris: arch-v10: kgdb: Add '__used' for static variable is_dyn_brkp
  cris: arch-v10: kgdb: Use BAR instead of DTP0 for register P12
  cris: kgdb: use native hex2bin
parents 15f93405 4247896f
Show whitespace changes
Inline Side-by-side
Showing with 272 additions and 3977 deletions
arch/cris/Kconfig
View file @ 0921f1ef
...@@ -57,7 +57,6 @@ config CRIS ...@@ -57,7 +57,6 @@ config CRIS
select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW
select GENERIC_IOMAP select GENERIC_IOMAP
select GENERIC_CMOS_UPDATE
select MODULES_USE_ELF_RELA select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS2 select CLONE_BACKWARDS2
select OLD_SIGSUSPEND select OLD_SIGSUSPEND
......
arch/cris/arch-v10/kernel/head.S
View file @ 0921f1ef
...@@ -354,63 +354,6 @@ no_command_line: ...@@ -354,63 +354,6 @@ no_command_line:
blo 1b blo 1b
nop nop
#ifdef CONFIG_BLK_DEV_ETRAXIDE
;; disable ATA before enabling it in genconfig below
moveq 0,$r0
move.d $r0,[R_ATA_CTRL_DATA]
move.d $r0,[R_ATA_TRANSFER_CNT]
move.d $r0,[R_ATA_CONFIG]
#if 0
move.d R_PORT_G_DATA, $r1
move.d $r0, [$r1]; assert ATA bus-reset
nop
nop
nop
nop
nop
nop
move.d 0x08000000,$r0
move.d $r0,[$r1]
#endif
#endif
#ifdef CONFIG_JULIETTE
;; configure external DMA channel 0 before enabling it in genconfig
moveq 0,$r0
move.d $r0,[R_EXT_DMA_0_ADDR]
; cnt enable, word size, output, stop, size 0
move.d IO_STATE (R_EXT_DMA_0_CMD, cnt, enable) \
| IO_STATE (R_EXT_DMA_0_CMD, rqpol, ahigh) \
| IO_STATE (R_EXT_DMA_0_CMD, apol, ahigh) \
| IO_STATE (R_EXT_DMA_0_CMD, rq_ack, burst) \
| IO_STATE (R_EXT_DMA_0_CMD, wid, word) \
| IO_STATE (R_EXT_DMA_0_CMD, dir, output) \
| IO_STATE (R_EXT_DMA_0_CMD, run, stop) \
| IO_FIELD (R_EXT_DMA_0_CMD, trf_count, 0),$r0
move.d $r0,[R_EXT_DMA_0_CMD]
;; reset dma4 and wait for completion
moveq IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
move.b $r0,[R_DMA_CH4_CMD]
1: move.b [R_DMA_CH4_CMD],$r0
and.b IO_MASK (R_DMA_CH4_CMD, cmd),$r0
cmp.b IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
beq 1b
nop
;; reset dma5 and wait for completion
moveq IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
move.b $r0,[R_DMA_CH5_CMD]
1: move.b [R_DMA_CH5_CMD],$r0
and.b IO_MASK (R_DMA_CH5_CMD, cmd),$r0
cmp.b IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
beq 1b
nop
#endif
;; Etrax product HW genconfig setup ;; Etrax product HW genconfig setup
moveq 0,$r0 moveq 0,$r0
...@@ -447,21 +390,6 @@ no_command_line: ...@@ -447,21 +390,6 @@ no_command_line:
| IO_STATE (R_GEN_CONFIG, dma9, usb),$r0 | IO_STATE (R_GEN_CONFIG, dma9, usb),$r0
#if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT)
or.d IO_STATE (R_GEN_CONFIG, g0dir, out),$r0
#endif
#if defined(CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT)
or.d IO_STATE (R_GEN_CONFIG, g8_15dir, out),$r0
#endif
#if defined(CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT)
or.d IO_STATE (R_GEN_CONFIG, g16_23dir, out),$r0
#endif
#if defined(CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT)
or.d IO_STATE (R_GEN_CONFIG, g24dir, out),$r0
#endif
move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG
move.d $r0,[R_GEN_CONFIG] move.d $r0,[R_GEN_CONFIG]
...@@ -500,19 +428,9 @@ no_command_line: ...@@ -500,19 +428,9 @@ no_command_line:
;; including their shadow registers ;; including their shadow registers
move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0 move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0
#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
or.b IO_STATE (R_PORT_PA_DIR, dir7, output),$r0
#endif
move.b $r0,[port_pa_dir_shadow] move.b $r0,[port_pa_dir_shadow]
move.b $r0,[R_PORT_PA_DIR] move.b $r0,[R_PORT_PA_DIR]
move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0 move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0
#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
and.b ~(1 << 7),$r0
#else
or.b (1 << 7),$r0
#endif
#endif
move.b $r0,[port_pa_data_shadow] move.b $r0,[port_pa_data_shadow]
move.b $r0,[R_PORT_PA_DATA] move.b $r0,[R_PORT_PA_DATA]
...@@ -520,19 +438,9 @@ no_command_line: ...@@ -520,19 +438,9 @@ no_command_line:
move.b $r0,[port_pb_config_shadow] move.b $r0,[port_pb_config_shadow]
move.b $r0,[R_PORT_PB_CONFIG] move.b $r0,[R_PORT_PB_CONFIG]
move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0 move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0
#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
or.b IO_STATE (R_PORT_PB_DIR, dir5, output),$r0
#endif
move.b $r0,[port_pb_dir_shadow] move.b $r0,[port_pb_dir_shadow]
move.b $r0,[R_PORT_PB_DIR] move.b $r0,[R_PORT_PB_DIR]
move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0 move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0
#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
and.b ~(1 << 5),$r0
#else
or.b (1 << 5),$r0
#endif
#endif
move.b $r0,[port_pb_data_shadow] move.b $r0,[port_pb_data_shadow]
move.b $r0,[R_PORT_PB_DATA] move.b $r0,[R_PORT_PB_DATA]
...@@ -541,20 +449,6 @@ no_command_line: ...@@ -541,20 +449,6 @@ no_command_line:
move.d $r0, [R_PORT_PB_I2C] move.d $r0, [R_PORT_PB_I2C]
moveq 0,$r0 moveq 0,$r0
#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G10)
#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
and.d ~(1 << 10),$r0
#else
or.d (1 << 10),$r0
#endif
#endif
#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G11)
#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
and.d ~(1 << 11),$r0
#else
or.d (1 << 11),$r0
#endif
#endif
move.d $r0,[port_g_data_shadow] move.d $r0,[port_g_data_shadow]
move.d $r0,[R_PORT_G_DATA] move.d $r0,[R_PORT_G_DATA]
......
arch/cris/arch-v10/kernel/kgdb.c
View file @ 0921f1ef
...@@ -275,7 +275,7 @@ static char remcomOutBuffer[BUFMAX]; ...@@ -275,7 +275,7 @@ static char remcomOutBuffer[BUFMAX];
/* Error and warning messages. */ /* Error and warning messages. */
enum error_type enum error_type
{ {
SUCCESS, E01, E02, E03, E04, E05, E06, E07 SUCCESS, E01, E02, E03, E04, E05, E06, E07, E08
}; };
static char *error_message[] = static char *error_message[] =
{ {
...@@ -286,7 +286,8 @@ static char *error_message[] = ...@@ -286,7 +286,8 @@ static char *error_message[] =
"E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.", "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
"E05 Change register content - P - the register is not implemented..", "E05 Change register content - P - the register is not implemented..",
"E06 Change memory content - M - internal error.", "E06 Change memory content - M - internal error.",
"E07 Change register content - P - the register is not stored on the stack" "E07 Change register content - P - the register is not stored on the stack",
"E08 Invalid parameter"
}; };
/********************************* Register image ****************************/ /********************************* Register image ****************************/
/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's /* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's
...@@ -351,7 +352,7 @@ char internal_stack[INTERNAL_STACK_SIZE]; ...@@ -351,7 +352,7 @@ char internal_stack[INTERNAL_STACK_SIZE];
breakpoint to be handled. A static breakpoint uses the content of register breakpoint to be handled. A static breakpoint uses the content of register
BRP as it is whereas a dynamic breakpoint requires subtraction with 2 BRP as it is whereas a dynamic breakpoint requires subtraction with 2
in order to execute the instruction. The first breakpoint is static. */ in order to execute the instruction. The first breakpoint is static. */
static unsigned char is_dyn_brkp = 0; static unsigned char __used is_dyn_brkp;
/********************************* String library ****************************/ /********************************* String library ****************************/
/* Single-step over library functions creates trap loops. */ /* Single-step over library functions creates trap loops. */
...@@ -413,18 +414,6 @@ gdb_cris_strtol (const char *s, char **endptr, int base) ...@@ -413,18 +414,6 @@ gdb_cris_strtol (const char *s, char **endptr, int base)
} }
/********************************** Packet I/O ******************************/ /********************************** Packet I/O ******************************/
/* Returns the integer equivalent of a hexadecimal character. */
static int
hex (char ch)
{
if ((ch >= 'a') && (ch <= 'f'))
return (ch - 'a' + 10);
if ((ch >= '0') && (ch <= '9'))
return (ch - '0');
if ((ch >= 'A') && (ch <= 'F'))
return (ch - 'A' + 10);
return (-1);
}
/* Convert the memory, pointed to by mem into hexadecimal representation. /* Convert the memory, pointed to by mem into hexadecimal representation.
Put the result in buf, and return a pointer to the last character Put the result in buf, and return a pointer to the last character
...@@ -455,22 +444,6 @@ mem2hex(char *buf, unsigned char *mem, int count) ...@@ -455,22 +444,6 @@ mem2hex(char *buf, unsigned char *mem, int count)
return (buf); return (buf);
} }
/* Convert the array, in hexadecimal representation, pointed to by buf into
binary representation. Put the result in mem, and return a pointer to
the character after the last byte written. */
static unsigned char*
hex2mem (unsigned char *mem, char *buf, int count)
{
int i;
unsigned char ch;
for (i = 0; i < count; i++) {
ch = hex (*buf++) << 4;
ch = ch + hex (*buf++);
*mem++ = ch;
}
return (mem);
}
/* Put the content of the array, in binary representation, pointed to by buf /* Put the content of the array, in binary representation, pointed to by buf
into memory pointed to by mem, and return a pointer to the character after into memory pointed to by mem, and return a pointer to the character after
the last byte written. the last byte written.
...@@ -524,8 +497,8 @@ getpacket (char *buffer) ...@@ -524,8 +497,8 @@ getpacket (char *buffer)
buffer[count] = '\0'; buffer[count] = '\0';
if (ch == '#') { if (ch == '#') {
xmitcsum = hex (getDebugChar ()) << 4; xmitcsum = hex_to_bin(getDebugChar()) << 4;
xmitcsum += hex (getDebugChar ()); xmitcsum += hex_to_bin(getDebugChar());
if (checksum != xmitcsum) { if (checksum != xmitcsum) {
/* Wrong checksum */ /* Wrong checksum */
putDebugChar ('-'); putDebugChar ('-');
...@@ -599,7 +572,7 @@ putDebugString (const unsigned char *str, int length) ...@@ -599,7 +572,7 @@ putDebugString (const unsigned char *str, int length)
/********************************* Register image ****************************/ /********************************* Register image ****************************/
/* Write a value to a specified register in the register image of the current /* Write a value to a specified register in the register image of the current
thread. Returns status code SUCCESS, E02 or E05. */ thread. Returns status code SUCCESS, E02, E05 or E08. */
static int static int
write_register (int regno, char *val) write_register (int regno, char *val)
{ {
...@@ -608,8 +581,9 @@ write_register (int regno, char *val) ...@@ -608,8 +581,9 @@ write_register (int regno, char *val)
if (regno >= R0 && regno <= PC) { if (regno >= R0 && regno <= PC) {
/* 32-bit register with simple offset. */ /* 32-bit register with simple offset. */
hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int), if (hex2bin((unsigned char *)current_reg + regno * sizeof(unsigned int),
val, sizeof(unsigned int)); val, sizeof(unsigned int)))
status = E08;
} }
else if (regno == P0 || regno == VR || regno == P4 || regno == P8) { else if (regno == P0 || regno == VR || regno == P4 || regno == P8) {
/* Do not support read-only registers. */ /* Do not support read-only registers. */
...@@ -618,13 +592,15 @@ write_register (int regno, char *val) ...@@ -618,13 +592,15 @@ write_register (int regno, char *val)
else if (regno == CCR) { else if (regno == CCR) {
/* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented, /* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented,
and P7 (MOF) is 32 bits in ETRAX 100LX. */ and P7 (MOF) is 32 bits in ETRAX 100LX. */
hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short), if (hex2bin((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short),
val, sizeof(unsigned short)); val, sizeof(unsigned short)))
status = E08;
} }
else if (regno >= MOF && regno <= USP) { else if (regno >= MOF && regno <= USP) {
/* 32 bit register with complex offset. (P8 has been taken care of.) */ /* 32 bit register with complex offset. (P8 has been taken care of.) */
hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int), if (hex2bin((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int),
val, sizeof(unsigned int)); val, sizeof(unsigned int)))
status = E08;
} }
else { else {
/* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */ /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */
...@@ -759,8 +735,10 @@ handle_exception (int sigval) ...@@ -759,8 +735,10 @@ handle_exception (int sigval)
/* Write registers. GXX..XX /* Write registers. GXX..XX
Each byte of register data is described by two hex digits. Each byte of register data is described by two hex digits.
Success: OK Success: OK
Failure: void. */ Failure: E08. */
hex2mem((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers)); if (hex2bin((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers)))
gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
else
gdb_cris_strcpy (remcomOutBuffer, "OK"); gdb_cris_strcpy (remcomOutBuffer, "OK");
break; break;
...@@ -771,7 +749,7 @@ handle_exception (int sigval) ...@@ -771,7 +749,7 @@ handle_exception (int sigval)
for each byte in the register (target byte order). P1f=11223344 means for each byte in the register (target byte order). P1f=11223344 means
set register 31 to 44332211. set register 31 to 44332211.
Success: OK Success: OK
Failure: E02, E05 */ Failure: E02, E05, E08 */
{ {
char *suffix; char *suffix;
int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16); int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16);
...@@ -791,6 +769,10 @@ handle_exception (int sigval) ...@@ -791,6 +769,10 @@ handle_exception (int sigval)
/* Do not support non-existing registers on the stack. */ /* Do not support non-existing registers on the stack. */
gdb_cris_strcpy (remcomOutBuffer, error_message[E07]); gdb_cris_strcpy (remcomOutBuffer, error_message[E07]);
break; break;
case E08:
/* Invalid parameter. */
gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
break;
default: default:
/* Valid register number. */ /* Valid register number. */
gdb_cris_strcpy (remcomOutBuffer, "OK"); gdb_cris_strcpy (remcomOutBuffer, "OK");
...@@ -826,7 +808,7 @@ handle_exception (int sigval) ...@@ -826,7 +808,7 @@ handle_exception (int sigval)
AA..AA is the start address, LLLL is the number of bytes, and AA..AA is the start address, LLLL is the number of bytes, and
XX..XX is the hexadecimal data. XX..XX is the hexadecimal data.
Success: OK Success: OK
Failure: void. */ Failure: E08. */
{ {
char *lenptr; char *lenptr;
char *dataptr; char *dataptr;
...@@ -835,14 +817,15 @@ handle_exception (int sigval) ...@@ -835,14 +817,15 @@ handle_exception (int sigval)
int length = gdb_cris_strtol(lenptr+1, &dataptr, 16); int length = gdb_cris_strtol(lenptr+1, &dataptr, 16);
if (*lenptr == ',' && *dataptr == ':') { if (*lenptr == ',' && *dataptr == ':') {
if (remcomInBuffer[0] == 'M') { if (remcomInBuffer[0] == 'M') {
hex2mem(addr, dataptr + 1, length); if (hex2bin(addr, dataptr + 1, length))
} gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
else /* X */ { else
gdb_cris_strcpy (remcomOutBuffer, "OK");
} else /* X */ {
bin2mem(addr, dataptr + 1, length); bin2mem(addr, dataptr + 1, length);
}
gdb_cris_strcpy (remcomOutBuffer, "OK"); gdb_cris_strcpy (remcomOutBuffer, "OK");
} }
else { } else {
gdb_cris_strcpy (remcomOutBuffer, error_message[E06]); gdb_cris_strcpy (remcomOutBuffer, error_message[E06]);
} }
} }
...@@ -970,7 +953,7 @@ asm ("\n" ...@@ -970,7 +953,7 @@ asm ("\n"
" move $ibr,[cris_reg+0x4E] ; P9,\n" " move $ibr,[cris_reg+0x4E] ; P9,\n"
" move $irp,[cris_reg+0x52] ; P10,\n" " move $irp,[cris_reg+0x52] ; P10,\n"
" move $srp,[cris_reg+0x56] ; P11,\n" " move $srp,[cris_reg+0x56] ; P11,\n"
" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n" " move $bar,[cris_reg+0x5A] ; P12,\n"
" ; P13, register DCCR already saved\n" " ; P13, register DCCR already saved\n"
";; Due to the old assembler-versions BRP might not be recognized\n" ";; Due to the old assembler-versions BRP might not be recognized\n"
" .word 0xE670 ; move brp,r0\n" " .word 0xE670 ; move brp,r0\n"
...@@ -1063,7 +1046,7 @@ asm ("\n" ...@@ -1063,7 +1046,7 @@ asm ("\n"
" move $ibr,[cris_reg+0x4E] ; P9,\n" " move $ibr,[cris_reg+0x4E] ; P9,\n"
" move $irp,[cris_reg+0x52] ; P10,\n" " move $irp,[cris_reg+0x52] ; P10,\n"
" move $srp,[cris_reg+0x56] ; P11,\n" " move $srp,[cris_reg+0x56] ; P11,\n"
" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n" " move $bar,[cris_reg+0x5A] ; P12,\n"
" ; P13, register DCCR already saved\n" " ; P13, register DCCR already saved\n"
";; Due to the old assembler-versions BRP might not be recognized\n" ";; Due to the old assembler-versions BRP might not be recognized\n"
" .word 0xE670 ; move brp,r0\n" " .word 0xE670 ; move brp,r0\n"
......
arch/cris/arch-v10/mm/init.c
View file @ 0921f1ef
...@@ -71,11 +71,7 @@ paging_init(void) ...@@ -71,11 +71,7 @@ paging_init(void)
IO_STATE(R_MMU_KSEG, seg_d, page ) | IO_STATE(R_MMU_KSEG, seg_d, page ) |
IO_STATE(R_MMU_KSEG, seg_c, page ) | IO_STATE(R_MMU_KSEG, seg_c, page ) |
IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */ IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */
#ifdef CONFIG_JULIETTE
IO_STATE(R_MMU_KSEG, seg_a, seg ) | /* ARTPEC etc. */
#else
IO_STATE(R_MMU_KSEG, seg_a, page ) | IO_STATE(R_MMU_KSEG, seg_a, page ) |
#endif
IO_STATE(R_MMU_KSEG, seg_9, seg ) | /* LED's on some boards */ IO_STATE(R_MMU_KSEG, seg_9, seg ) | /* LED's on some boards */
IO_STATE(R_MMU_KSEG, seg_8, seg ) | /* CSE0/1, flash and I/O */ IO_STATE(R_MMU_KSEG, seg_8, seg ) | /* CSE0/1, flash and I/O */
IO_STATE(R_MMU_KSEG, seg_7, page ) | /* kernel vmalloc area */ IO_STATE(R_MMU_KSEG, seg_7, page ) | /* kernel vmalloc area */
...@@ -92,11 +88,7 @@ paging_init(void) ...@@ -92,11 +88,7 @@ paging_init(void)
IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) | IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) |
IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) | IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) |
IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) | IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) |
#ifdef CONFIG_JULIETTE
IO_FIELD(R_MMU_KBASE_HI, base_a, 0xa ) |
#else
IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) | IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) |
#endif
IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) | IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) |
IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) ); IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) );
......
arch/cris/arch-v32/Kconfig
View file @ 0921f1ef
...@@ -10,95 +10,6 @@ config ETRAX_DRAM_VIRTUAL_BASE ...@@ -10,95 +10,6 @@ config ETRAX_DRAM_VIRTUAL_BASE
depends on ETRAX_ARCH_V32 depends on ETRAX_ARCH_V32
default "c0000000" default "c0000000"
choice
prompt "Nbr of Ethernet LED groups"
depends on ETRAX_ARCH_V32
default ETRAX_NBR_LED_GRP_ONE
help
Select how many Ethernet LED groups that can be used. Usually one per Ethernet
interface is a good choice.
config ETRAX_NBR_LED_GRP_ZERO
bool "Use zero LED groups"
help
Select this if you do not want any Ethernet LEDs.
config ETRAX_NBR_LED_GRP_ONE
bool "Use one LED group"
help
Select this if you want one Ethernet LED group. This LED group
can be used for one or more Ethernet interfaces. However, it is
recommended that each Ethernet interface use a dedicated LED group.
config ETRAX_NBR_LED_GRP_TWO
bool "Use two LED groups"
help
Select this if you want two Ethernet LED groups. This is the
best choice if you have more than one Ethernet interface and
would like to have separate LEDs for the interfaces.
endchoice
config ETRAX_LED_G_NET0
string "Ethernet LED group 0 green LED bit"
depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
default "PA3"
help
Bit to use for the green LED in Ethernet LED group 0.
config ETRAX_LED_R_NET0
string "Ethernet LED group 0 red LED bit"
depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
default "PA4"
help
Bit to use for the red LED in Ethernet LED group 0.
config ETRAX_LED_G_NET1
string "Ethernet group 1 green LED bit"
depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
default ""
help
Bit to use for the green LED in Ethernet LED group 1.
config ETRAX_LED_R_NET1
string "Ethernet group 1 red LED bit"
depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
default ""
help
Bit to use for the red LED in Ethernet LED group 1.
config ETRAX_V32_LED2G
string "Second green LED bit"
depends on ETRAX_ARCH_V32
default "PA5"
help
Bit to use for the first green LED (status LED).
Most Axis products use bit A5 here.
config ETRAX_V32_LED2R
string "Second red LED bit"
depends on ETRAX_ARCH_V32
default "PA6"
help
Bit to use for the first red LED (network LED).
Most Axis products use bit A6 here.
config ETRAX_V32_LED3G
string "Third green LED bit"
depends on ETRAX_ARCH_V32
default "PA7"
help
Bit to use for the first green LED (drive/power LED).
Most Axis products use bit A7 here.
config ETRAX_V32_LED3R
string "Third red LED bit"
depends on ETRAX_ARCH_V32
default "PA7"
help
Bit to use for the first red LED (drive/power LED).
Most Axis products use bit A7 here.
choice choice
prompt "Kernel GDB port" prompt "Kernel GDB port"
depends on ETRAX_KGDB depends on ETRAX_KGDB
......
arch/cris/arch-v32/drivers/Kconfig
View file @ 0921f1ef
...@@ -149,173 +149,6 @@ config ETRAX_NANDBOOT ...@@ -149,173 +149,6 @@ config ETRAX_NANDBOOT
Say Y if your boot code, kernel and root file system is in Say Y if your boot code, kernel and root file system is in
NAND flash. Say N if they are in NOR flash. NAND flash. Say N if they are in NOR flash.
config ETRAX_I2C
bool "I2C driver"
depends on ETRAX_ARCH_V32
help
This option enables the I2C driver used by e.g. the RTC driver.
config ETRAX_V32_I2C_DATA_PORT
string "I2C data pin"
depends on ETRAX_I2C
help
The pin to use for I2C data.
config ETRAX_V32_I2C_CLK_PORT
string "I2C clock pin"
depends on ETRAX_I2C
help
The pin to use for I2C clock.
config ETRAX_GPIO
bool "GPIO support"
depends on ETRAX_ARCH_V32
---help---
Enables the ETRAX general port device (major 120, minors 0-4).
You can use this driver to access the general port bits. It supports
these ioctl's:
#include <linux/etraxgpio.h>
fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val);
Remember that you need to setup the port directions appropriately in
the General configuration.
config ETRAX_VIRTUAL_GPIO
bool "Virtual GPIO support"
depends on ETRAX_GPIO
help
Enables the virtual Etrax general port device (major 120, minor 6).
It uses an I/O expander for the I2C-bus.
config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN
int "Virtual GPIO interrupt pin on PA pin"
range 0 7
depends on ETRAX_VIRTUAL_GPIO
help
The pin to use on PA for virtual gpio interrupt.
config ETRAX_PA_CHANGEABLE_DIR
hex "PA user changeable dir mask"
depends on ETRAX_GPIO
default "0x00" if ETRAXFS
default "0x00000000" if !ETRAXFS
help
This is a bitmask with information of what bits in PA that a
user can change direction on using ioctl's.
Bit set = changeable.
You probably want 0 here, but it depends on your hardware.
config ETRAX_PA_CHANGEABLE_BITS
hex "PA user changeable bits mask"
depends on ETRAX_GPIO
default "0x00" if ETRAXFS
default "0x00000000" if !ETRAXFS
help
This is a bitmask with information of what bits in PA
that a user can change the value on using ioctl's.
Bit set = changeable.
config ETRAX_PB_CHANGEABLE_DIR
hex "PB user changeable dir mask"
depends on ETRAX_GPIO
default "0x00000" if ETRAXFS
default "0x00000000" if !ETRAXFS
help
This is a bitmask with information of what bits in PB
that a user can change direction on using ioctl's.
Bit set = changeable.
You probably want 0 here, but it depends on your hardware.
config ETRAX_PB_CHANGEABLE_BITS
hex "PB user changeable bits mask"
depends on ETRAX_GPIO
default "0x00000" if ETRAXFS
default "0x00000000" if !ETRAXFS
help
This is a bitmask with information of what bits in PB
that a user can change the value on using ioctl's.
Bit set = changeable.
config ETRAX_PC_CHANGEABLE_DIR
hex "PC user changeable dir mask"
depends on ETRAX_GPIO
default "0x00000" if ETRAXFS
default "0x00000000" if !ETRAXFS
help
This is a bitmask with information of what bits in PC
that a user can change direction on using ioctl's.
Bit set = changeable.
You probably want 0 here, but it depends on your hardware.
config ETRAX_PC_CHANGEABLE_BITS
hex "PC user changeable bits mask"
depends on ETRAX_GPIO
default "0x00000" if ETRAXFS
default "0x00000000" if !ETRAXFS
help
This is a bitmask with information of what bits in PC
that a user can change the value on using ioctl's.
Bit set = changeable.
config ETRAX_PD_CHANGEABLE_DIR
hex "PD user changeable dir mask"
depends on ETRAX_GPIO && ETRAXFS
default "0x00000"
help
This is a bitmask with information of what bits in PD
that a user can change direction on using ioctl's.
Bit set = changeable.
You probably want 0x00000 here, but it depends on your hardware.
config ETRAX_PD_CHANGEABLE_BITS
hex "PD user changeable bits mask"
depends on ETRAX_GPIO && ETRAXFS
default "0x00000"
help
This is a bitmask (18 bits) with information of what bits in PD
that a user can change the value on using ioctl's.
Bit set = changeable.
config ETRAX_PE_CHANGEABLE_DIR
hex "PE user changeable dir mask"
depends on ETRAX_GPIO && ETRAXFS
default "0x00000"
help
This is a bitmask (18 bits) with information of what bits in PE
that a user can change direction on using ioctl's.
Bit set = changeable.
You probably want 0x00000 here, but it depends on your hardware.
config ETRAX_PE_CHANGEABLE_BITS
hex "PE user changeable bits mask"
depends on ETRAX_GPIO && ETRAXFS
default "0x00000"
help
This is a bitmask (18 bits) with information of what bits in PE
that a user can change the value on using ioctl's.
Bit set = changeable.
config ETRAX_PV_CHANGEABLE_DIR
hex "PV user changeable dir mask"
depends on ETRAX_VIRTUAL_GPIO
default "0x0000"
help
This is a bitmask (16 bits) with information of what bits in PV
that a user can change direction on using ioctl's.
Bit set = changeable.
You probably want 0x0000 here, but it depends on your hardware.
config ETRAX_PV_CHANGEABLE_BITS
hex "PV user changeable bits mask"
depends on ETRAX_VIRTUAL_GPIO
default "0x0000"
help
This is a bitmask (16 bits) with information of what bits in PV
that a user can change the value on using ioctl's.
Bit set = changeable.
config ETRAX_CARDBUS config ETRAX_CARDBUS
bool "Cardbus support" bool "Cardbus support"
depends on ETRAX_ARCH_V32 depends on ETRAX_ARCH_V32
......
arch/cris/arch-v32/drivers/Makefile
View file @ 0921f1ef
...@@ -7,6 +7,5 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o ...@@ -7,6 +7,5 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o
obj-$(CONFIG_ETRAXFS) += mach-fs/ obj-$(CONFIG_ETRAXFS) += mach-fs/
obj-$(CONFIG_CRIS_MACH_ARTPEC3) += mach-a3/ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += mach-a3/
obj-$(CONFIG_ETRAX_IOP_FW_LOAD) += iop_fw_load.o obj-$(CONFIG_ETRAX_IOP_FW_LOAD) += iop_fw_load.o
obj-$(CONFIG_ETRAX_I2C) += i2c.o
obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o
obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_PCI) += pci/
arch/cris/arch-v32/drivers/axisflashmap.c
View file @ 0921f1ef
...@@ -361,7 +361,7 @@ static int __init init_axis_flash(void) ...@@ -361,7 +361,7 @@ static int __init init_axis_flash(void)
#if 0 /* Dump flash memory so we can see what is going on */ #if 0 /* Dump flash memory so we can see what is going on */
if (main_mtd) { if (main_mtd) {
int sectoraddr, i; int sectoraddr;
for (sectoraddr = 0; sectoraddr < 2*65536+4096; for (sectoraddr = 0; sectoraddr < 2*65536+4096;
sectoraddr += PAGESIZE) { sectoraddr += PAGESIZE) {
main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len, main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len,
...@@ -369,21 +369,7 @@ static int __init init_axis_flash(void) ...@@ -369,21 +369,7 @@ static int __init init_axis_flash(void)
printk(KERN_INFO printk(KERN_INFO
"Sector at %d (length %d):\n", "Sector at %d (length %d):\n",
sectoraddr, len); sectoraddr, len);
for (i = 0; i < PAGESIZE; i += 16) { print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, page, PAGESIZE, false);
printk(KERN_INFO
"%02x %02x %02x %02x "
"%02x %02x %02x %02x "
"%02x %02x %02x %02x "
"%02x %02x %02x %02x\n",
page[i] & 255, page[i+1] & 255,
page[i+2] & 255, page[i+3] & 255,
page[i+4] & 255, page[i+5] & 255,
page[i+6] & 255, page[i+7] & 255,
page[i+8] & 255, page[i+9] & 255,
page[i+10] & 255, page[i+11] & 255,
page[i+12] & 255, page[i+13] & 255,
page[i+14] & 255, page[i+15] & 255);
}
} }
} }
#endif #endif
...@@ -417,25 +403,11 @@ static int __init init_axis_flash(void) ...@@ -417,25 +403,11 @@ static int __init init_axis_flash(void)
#if 0 /* Dump partition table so we can see what is going on */ #if 0 /* Dump partition table so we can see what is going on */
printk(KERN_INFO printk(KERN_INFO
"axisflashmap: flash read %d bytes at 0x%08x, data: " "axisflashmap: flash read %d bytes at 0x%08x, data: %8ph\n",
"%02x %02x %02x %02x %02x %02x %02x %02x\n", len, CONFIG_ETRAX_PTABLE_SECTOR, page);
len, CONFIG_ETRAX_PTABLE_SECTOR,
page[0] & 255, page[1] & 255,
page[2] & 255, page[3] & 255,
page[4] & 255, page[5] & 255,
page[6] & 255, page[7] & 255);
printk(KERN_INFO printk(KERN_INFO
"axisflashmap: partition table offset %d, data: " "axisflashmap: partition table offset %d, data: %8ph\n",
"%02x %02x %02x %02x %02x %02x %02x %02x\n", PARTITION_TABLE_OFFSET, page + PARTITION_TABLE_OFFSET);
PARTITION_TABLE_OFFSET,
page[PARTITION_TABLE_OFFSET+0] & 255,
page[PARTITION_TABLE_OFFSET+1] & 255,
page[PARTITION_TABLE_OFFSET+2] & 255,
page[PARTITION_TABLE_OFFSET+3] & 255,
page[PARTITION_TABLE_OFFSET+4] & 255,
page[PARTITION_TABLE_OFFSET+5] & 255,
page[PARTITION_TABLE_OFFSET+6] & 255,
page[PARTITION_TABLE_OFFSET+7] & 255);
#endif #endif
} }
......
arch/cris/arch-v32/drivers/i2c.c deleted 100644 → 0
View file @ 15f93405
/*!***************************************************************************
*!
*! FILE NAME : i2c.c
*!
*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other
*! kernel modules (i2c_writereg/readreg) and from userspace using
*! ioctl()'s
*!
*! Nov 30 1998 Torbjorn Eliasson Initial version.
*! Bjorn Wesen Elinux kernel version.
*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff -
*! don't use PB_I2C if DS1302 uses same bits,
*! use PB.
*| June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now
*| generates nack on last received byte,
*| instead of ack.
*| i2c_getack changed data level while clock
*| was high, causing DS75 to see a stop condition
*!
*! ---------------------------------------------------------------------------
*!
*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN
*!
*!***************************************************************************/
/****************** INCLUDE FILES SECTION ***********************************/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/mutex.h>
#include <asm/etraxi2c.h>
#include <asm/io.h>
#include <asm/delay.h>
#include "i2c.h"
/****************** I2C DEFINITION SECTION *************************/
#define D(x)
#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */
static DEFINE_MUTEX(i2c_mutex);
static const char i2c_name[] = "i2c";
#define CLOCK_LOW_TIME 8
#define CLOCK_HIGH_TIME 8
#define START_CONDITION_HOLD_TIME 8
#define STOP_CONDITION_HOLD_TIME 8
#define ENABLE_OUTPUT 0x01
#define ENABLE_INPUT 0x00
#define I2C_CLOCK_HIGH 1
#define I2C_CLOCK_LOW 0
#define I2C_DATA_HIGH 1
#define I2C_DATA_LOW 0
#define i2c_enable()
#define i2c_disable()
/* enable or disable output-enable, to select output or input on the i2c bus */
#define i2c_dir_out() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_out)
#define i2c_dir_in() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_in)
/* control the i2c clock and data signals */
#define i2c_clk(x) crisv32_io_set(&cris_i2c_clk, x)
#define i2c_data(x) crisv32_io_set(&cris_i2c_data, x)
/* read a bit from the i2c interface */
#define i2c_getbit() crisv32_io_rd(&cris_i2c_data)
#define i2c_delay(usecs) udelay(usecs)
static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
/****************** VARIABLE SECTION ************************************/
static struct crisv32_iopin cris_i2c_clk;
static struct crisv32_iopin cris_i2c_data;
/****************** FUNCTION DEFINITION SECTION *************************/
/* generate i2c start condition */
void
i2c_start(void)
{
/*
* SCL=1 SDA=1
*/
i2c_dir_out();
i2c_delay(CLOCK_HIGH_TIME/6);
i2c_data(I2C_DATA_HIGH);
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
/*
* SCL=1 SDA=0
*/
i2c_data(I2C_DATA_LOW);
i2c_delay(START_CONDITION_HOLD_TIME);
/*
* SCL=0 SDA=0
*/
i2c_clk(I2C_CLOCK_LOW);
i2c_delay(CLOCK_LOW_TIME);
}
/* generate i2c stop condition */
void
i2c_stop(void)
{
i2c_dir_out();
/*
* SCL=0 SDA=0
*/
i2c_clk(I2C_CLOCK_LOW);
i2c_data(I2C_DATA_LOW);
i2c_delay(CLOCK_LOW_TIME*2);
/*
* SCL=1 SDA=0
*/
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME*2);
/*
* SCL=1 SDA=1
*/
i2c_data(I2C_DATA_HIGH);
i2c_delay(STOP_CONDITION_HOLD_TIME);
i2c_dir_in();
}
/* write a byte to the i2c interface */
void
i2c_outbyte(unsigned char x)
{
int i;
i2c_dir_out();
for (i = 0; i < 8; i++) {
if (x & 0x80) {
i2c_data(I2C_DATA_HIGH);
} else {
i2c_data(I2C_DATA_LOW);
}
i2c_delay(CLOCK_LOW_TIME/2);
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
i2c_clk(I2C_CLOCK_LOW);
i2c_delay(CLOCK_LOW_TIME/2);
x <<= 1;
}
i2c_data(I2C_DATA_LOW);
i2c_delay(CLOCK_LOW_TIME/2);
/*
* enable input
*/
i2c_dir_in();
}
/* read a byte from the i2c interface */
unsigned char
i2c_inbyte(void)
{
unsigned char aBitByte = 0;
int i;
/* Switch off I2C to get bit */
i2c_disable();
i2c_dir_in();
i2c_delay(CLOCK_HIGH_TIME/2);
/* Get bit */
aBitByte |= i2c_getbit();
/* Enable I2C */
i2c_enable();
i2c_delay(CLOCK_LOW_TIME/2);
for (i = 1; i < 8; i++) {
aBitByte <<= 1;
/* Clock pulse */
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
i2c_clk(I2C_CLOCK_LOW);
i2c_delay(CLOCK_LOW_TIME);
/* Switch off I2C to get bit */
i2c_disable();
i2c_dir_in();
i2c_delay(CLOCK_HIGH_TIME/2);
/* Get bit */
aBitByte |= i2c_getbit();
/* Enable I2C */
i2c_enable();
i2c_delay(CLOCK_LOW_TIME/2);
}
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
/*
* we leave the clock low, getbyte is usually followed
* by sendack/nack, they assume the clock to be low
*/
i2c_clk(I2C_CLOCK_LOW);
return aBitByte;
}
/*#---------------------------------------------------------------------------
*#
*# FUNCTION NAME: i2c_getack
*#
*# DESCRIPTION : checks if ack was received from ic2
*#
*#--------------------------------------------------------------------------*/
int
i2c_getack(void)
{
int ack = 1;
/*
* enable output
*/
i2c_dir_out();
/*
* Release data bus by setting
* data high
*/
i2c_data(I2C_DATA_HIGH);
/*
* enable input
*/
i2c_dir_in();
i2c_delay(CLOCK_HIGH_TIME/4);
/*
* generate ACK clock pulse
*/
i2c_clk(I2C_CLOCK_HIGH);
#if 0
/*
* Use PORT PB instead of I2C
* for input. (I2C not working)
*/
i2c_clk(1);
i2c_data(1);
/*
* switch off I2C
*/
i2c_data(1);
i2c_disable();
i2c_dir_in();
#endif
/*
* now wait for ack
*/
i2c_delay(CLOCK_HIGH_TIME/2);
/*
* check for ack
*/
if (i2c_getbit())
ack = 0;
i2c_delay(CLOCK_HIGH_TIME/2);
if (!ack) {
if (!i2c_getbit()) /* receiver pulld SDA low */
ack = 1;
i2c_delay(CLOCK_HIGH_TIME/2);
}
/*
* our clock is high now, make sure data is low
* before we enable our output. If we keep data high
* and enable output, we would generate a stop condition.
*/
#if 0
i2c_data(I2C_DATA_LOW);
/*
* end clock pulse
*/
i2c_enable();
i2c_dir_out();
#endif
i2c_clk(I2C_CLOCK_LOW);
i2c_delay(CLOCK_HIGH_TIME/4);
/*
* enable output
*/
i2c_dir_out();
/*
* remove ACK clock pulse
*/
i2c_data(I2C_DATA_HIGH);
i2c_delay(CLOCK_LOW_TIME/2);
return ack;
}
/*#---------------------------------------------------------------------------
*#
*# FUNCTION NAME: I2C::sendAck
*#
*# DESCRIPTION : Send ACK on received data
*#
*#--------------------------------------------------------------------------*/
void
i2c_sendack(void)
{
/*
* enable output
*/
i2c_delay(CLOCK_LOW_TIME);
i2c_dir_out();
/*
* set ack pulse high
*/
i2c_data(I2C_DATA_LOW);
/*
* generate clock pulse
*/
i2c_delay(CLOCK_HIGH_TIME/6);
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
i2c_clk(I2C_CLOCK_LOW);
i2c_delay(CLOCK_LOW_TIME/6);
/*
* reset data out
*/
i2c_data(I2C_DATA_HIGH);
i2c_delay(CLOCK_LOW_TIME);
i2c_dir_in();
}
/*#---------------------------------------------------------------------------
*#
*# FUNCTION NAME: i2c_sendnack
*#
*# DESCRIPTION : Sends NACK on received data
*#
*#--------------------------------------------------------------------------*/
void
i2c_sendnack(void)
{
/*
* enable output
*/
i2c_delay(CLOCK_LOW_TIME);
i2c_dir_out();
/*
* set data high
*/
i2c_data(I2C_DATA_HIGH);
/*
* generate clock pulse
*/
i2c_delay(CLOCK_HIGH_TIME/6);
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
i2c_clk(I2C_CLOCK_LOW);
i2c_delay(CLOCK_LOW_TIME);
i2c_dir_in();
}
/*#---------------------------------------------------------------------------
*#
*# FUNCTION NAME: i2c_write
*#
*# DESCRIPTION : Writes a value to an I2C device
*#
*#--------------------------------------------------------------------------*/
int
i2c_write(unsigned char theSlave, void *data, size_t nbytes)
{
int error, cntr = 3;
unsigned char bytes_wrote = 0;
unsigned char value;
unsigned long flags;
spin_lock_irqsave(&i2c_lock, flags);
do {
error = 0;
i2c_start();
/*
* send slave address
*/
i2c_outbyte((theSlave & 0xfe));
/*
* wait for ack
*/
if (!i2c_getack())
error = 1;
/*
* send data
*/
for (bytes_wrote = 0; bytes_wrote < nbytes; bytes_wrote++) {
memcpy(&value, data + bytes_wrote, sizeof value);
i2c_outbyte(value);
/*
* now it's time to wait for ack
*/
if (!i2c_getack())
error |= 4;
}
/*
* end byte stream
*/
i2c_stop();
} while (error && cntr--);
i2c_delay(CLOCK_LOW_TIME);
spin_unlock_irqrestore(&i2c_lock, flags);
return -error;
}
/*#---------------------------------------------------------------------------
*#
*# FUNCTION NAME: i2c_read
*#
*# DESCRIPTION : Reads a value from an I2C device
*#
*#--------------------------------------------------------------------------*/
int
i2c_read(unsigned char theSlave, void *data, size_t nbytes)
{
unsigned char b = 0;
unsigned char bytes_read = 0;
int error, cntr = 3;
unsigned long flags;
spin_lock_irqsave(&i2c_lock, flags);
do {
error = 0;
memset(data, 0, nbytes);
/*
* generate start condition
*/
i2c_start();
/*
* send slave address
*/
i2c_outbyte((theSlave | 0x01));
/*
* wait for ack
*/
if (!i2c_getack())
error = 1;
/*
* fetch data
*/
for (bytes_read = 0; bytes_read < nbytes; bytes_read++) {
b = i2c_inbyte();
memcpy(data + bytes_read, &b, sizeof b);
if (bytes_read < (nbytes - 1))
i2c_sendack();
}
/*
* last received byte needs to be nacked
* instead of acked
*/
i2c_sendnack();
/*
* end sequence
*/
i2c_stop();
} while (error && cntr--);
spin_unlock_irqrestore(&i2c_lock, flags);
return -error;
}
/*#---------------------------------------------------------------------------
*#
*# FUNCTION NAME: i2c_writereg
*#
*# DESCRIPTION : Writes a value to an I2C device
*#
*#--------------------------------------------------------------------------*/
int
i2c_writereg(unsigned char theSlave, unsigned char theReg,
unsigned char theValue)
{
int error, cntr = 3;
unsigned long flags;
spin_lock_irqsave(&i2c_lock, flags);
do {
error = 0;
i2c_start();
/*
* send slave address
*/
i2c_outbyte((theSlave & 0xfe));
/*
* wait for ack
*/
if(!i2c_getack())
error = 1;
/*
* now select register
*/
i2c_dir_out();
i2c_outbyte(theReg);
/*
* now it's time to wait for ack
*/
if(!i2c_getack())
error |= 2;
/*
* send register register data
*/
i2c_outbyte(theValue);
/*
* now it's time to wait for ack
*/
if(!i2c_getack())
error |= 4;
/*
* end byte stream
*/
i2c_stop();
} while(error && cntr--);
i2c_delay(CLOCK_LOW_TIME);
spin_unlock_irqrestore(&i2c_lock, flags);
return -error;
}
/*#---------------------------------------------------------------------------
*#
*# FUNCTION NAME: i2c_readreg
*#
*# DESCRIPTION : Reads a value from the decoder registers.
*#
*#--------------------------------------------------------------------------*/
unsigned char
i2c_readreg(unsigned char theSlave, unsigned char theReg)
{
unsigned char b = 0;
int error, cntr = 3;
unsigned long flags;
spin_lock_irqsave(&i2c_lock, flags);
do {
error = 0;
/*
* generate start condition
*/
i2c_start();
/*
* send slave address
*/
i2c_outbyte((theSlave & 0xfe));
/*
* wait for ack
*/
if(!i2c_getack())
error = 1;
/*
* now select register
*/
i2c_dir_out();
i2c_outbyte(theReg);
/*
* now it's time to wait for ack
*/
if(!i2c_getack())
error |= 2;
/*
* repeat start condition
*/
i2c_delay(CLOCK_LOW_TIME);
i2c_start();
/*
* send slave address
*/
i2c_outbyte(theSlave | 0x01);
/*
* wait for ack
*/
if(!i2c_getack())
error |= 4;
/*
* fetch register
*/
b = i2c_inbyte();
/*
* last received byte needs to be nacked
* instead of acked
*/
i2c_sendnack();
/*
* end sequence
*/
i2c_stop();
} while(error && cntr--);
spin_unlock_irqrestore(&i2c_lock, flags);
return b;
}
static int
i2c_open(struct inode *inode, struct file *filp)
{
return 0;
}
static int
i2c_release(struct inode *inode, struct file *filp)
{
return 0;
}
/* Main device API. ioctl's to write or read to/from i2c registers.
*/
static long
i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int ret;
if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
return -ENOTTY;
}
switch (_IOC_NR(cmd)) {
case I2C_WRITEREG:
/* write to an i2c slave */
D(printk("i2cw %d %d %d\n",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg),
I2C_ARGVALUE(arg)));
mutex_lock(&i2c_mutex);
ret = i2c_writereg(I2C_ARGSLAVE(arg),
I2C_ARGREG(arg),
I2C_ARGVALUE(arg));
mutex_unlock(&i2c_mutex);
return ret;
case I2C_READREG:
{
unsigned char val;
/* read from an i2c slave */
D(printk("i2cr %d %d ",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg)));
mutex_lock(&i2c_mutex);
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
mutex_unlock(&i2c_mutex);
D(printk("= %d\n", val));
return val;
}
default:
return -EINVAL;
}
return 0;
}
static const struct file_operations i2c_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = i2c_ioctl,
.open = i2c_open,
.release = i2c_release,
.llseek = noop_llseek,
};
static int __init i2c_init(void)
{
static int res;
static int first = 1;
if (!first)
return res;
first = 0;
/* Setup and enable the DATA and CLK pins */
res = crisv32_io_get_name(&cris_i2c_data,
CONFIG_ETRAX_V32_I2C_DATA_PORT);
if (res < 0)
return res;
res = crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_V32_I2C_CLK_PORT);
crisv32_io_set_dir(&cris_i2c_clk, crisv32_io_dir_out);
return res;
}
static int __init i2c_register(void)
{
int res;
res = i2c_init();
if (res < 0)
return res;
/* register char device */
res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
if (res < 0) {
printk(KERN_ERR "i2c: couldn't get a major number.\n");
return res;
}
printk(KERN_INFO
"I2C driver v2.2, (c) 1999-2007 Axis Communications AB\n");
return 0;
}
/* this makes sure that i2c_init is called during boot */
module_init(i2c_register);
/****************** END OF FILE i2c.c ********************************/
arch/cris/arch-v32/drivers/i2c.h deleted 100644 → 0
View file @ 15f93405
#include <linux/init.h>
/* High level I2C actions */
int i2c_write(unsigned char theSlave, void *data, size_t nbytes);
int i2c_read(unsigned char theSlave, void *data, size_t nbytes);
int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
/* Low level I2C */
void i2c_start(void);
void i2c_stop(void);
void i2c_outbyte(unsigned char x);
unsigned char i2c_inbyte(void);
int i2c_getack(void);
void i2c_sendack(void);
arch/cris/arch-v32/drivers/mach-a3/Makefile
View file @ 0921f1ef
...@@ -3,4 +3,3 @@ ...@@ -3,4 +3,3 @@
# #
obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o
obj-$(CONFIG_ETRAX_GPIO) += gpio.o
arch/cris/arch-v32/drivers/mach-a3/gpio.c deleted 100644 → 0
View file @ 15f93405
/*
* Artec-3 general port I/O device
*
* Copyright (c) 2007 Axis Communications AB
*
* Authors: Bjorn Wesen (initial version)
* Ola Knutsson (LED handling)
* Johan Adolfsson (read/set directions, write, port G,
* port to ETRAX FS.
* Ricard Wanderlof (PWM for Artpec-3)
*
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <asm/etraxgpio.h>
#include <hwregs/reg_map.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/gio_defs.h>
#include <hwregs/intr_vect_defs.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <mach/pinmux.h>
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
#include "../i2c.h"
#define VIRT_I2C_ADDR 0x40
#endif
/* The following gio ports on ARTPEC-3 is available:
* pa 32 bits
* pb 32 bits
* pc 16 bits
* each port has a rw_px_dout, r_px_din and rw_px_oe register.
*/
#define GPIO_MAJOR 120 /* experimental MAJOR number */
#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */
#define D(x)
#if 0
static int dp_cnt;
#define DP(x) \
do { \
dp_cnt++; \
if (dp_cnt % 1000 == 0) \
x; \
} while (0)
#else
#define DP(x)
#endif
static DEFINE_MUTEX(gpio_mutex);
static char gpio_name[] = "etrax gpio";
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg);
#endif
static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static ssize_t gpio_write(struct file *file, const char __user *buf,
size_t count, loff_t *off);
static int gpio_open(struct inode *inode, struct file *filp);
static int gpio_release(struct inode *inode, struct file *filp);
static unsigned int gpio_poll(struct file *filp,
struct poll_table_struct *wait);
/* private data per open() of this driver */
struct gpio_private {
struct gpio_private *next;
/* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
unsigned char clk_mask;
unsigned char data_mask;
unsigned char write_msb;
unsigned char pad1;
/* These fields are generic */
unsigned long highalarm, lowalarm;
wait_queue_head_t alarm_wq;
int minor;
};
static void gpio_set_alarm(struct gpio_private *priv);
static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
unsigned long arg);
/* linked list of alarms to check for */
static struct gpio_private *alarmlist;
static int wanted_interrupts;
static DEFINE_SPINLOCK(gpio_lock);
#define NUM_PORTS (GPIO_MINOR_LAST+1)
#define GIO_REG_RD_ADDR(reg) \
(unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
#define GIO_REG_WR_ADDR(reg) \
(unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg)
static unsigned long led_dummy;
static unsigned long port_d_dummy; /* Only input on Artpec-3 */
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static unsigned long port_e_dummy; /* Non existent on Artpec-3 */
static unsigned long virtual_dummy;
static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
static unsigned short cached_virtual_gpio_read;
#endif
static unsigned long *data_out[NUM_PORTS] = {
GIO_REG_WR_ADDR(rw_pa_dout),
GIO_REG_WR_ADDR(rw_pb_dout),
&led_dummy,
GIO_REG_WR_ADDR(rw_pc_dout),
&port_d_dummy,
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
&port_e_dummy,
&virtual_dummy,
#endif
};
static unsigned long *data_in[NUM_PORTS] = {
GIO_REG_RD_ADDR(r_pa_din),
GIO_REG_RD_ADDR(r_pb_din),
&led_dummy,
GIO_REG_RD_ADDR(r_pc_din),
GIO_REG_RD_ADDR(r_pd_din),
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
&port_e_dummy,
&virtual_dummy,
#endif
};
static unsigned long changeable_dir[NUM_PORTS] = {
CONFIG_ETRAX_PA_CHANGEABLE_DIR,
CONFIG_ETRAX_PB_CHANGEABLE_DIR,
0,
CONFIG_ETRAX_PC_CHANGEABLE_DIR,
0,
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
0,
CONFIG_ETRAX_PV_CHANGEABLE_DIR,
#endif
};
static unsigned long changeable_bits[NUM_PORTS] = {
CONFIG_ETRAX_PA_CHANGEABLE_BITS,
CONFIG_ETRAX_PB_CHANGEABLE_BITS,
0,
CONFIG_ETRAX_PC_CHANGEABLE_BITS,
0,
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
0,
CONFIG_ETRAX_PV_CHANGEABLE_BITS,
#endif
};
static unsigned long *dir_oe[NUM_PORTS] = {
GIO_REG_WR_ADDR(rw_pa_oe),
GIO_REG_WR_ADDR(rw_pb_oe),
&led_dummy,
GIO_REG_WR_ADDR(rw_pc_oe),
&port_d_dummy,
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
&port_e_dummy,
&virtual_rw_pv_oe,
#endif
};
static void gpio_set_alarm(struct gpio_private *priv)
{
int bit;
int intr_cfg;
int mask;
int pins;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg);
pins = REG_RD_INT(gio, regi_gio, rw_intr_pins);
mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS;
for (bit = 0; bit < 32; bit++) {
int intr = bit % 8;
int pin = bit / 8;
if (priv->minor < GPIO_MINOR_LEDS)
pin += priv->minor * 4;
else
pin += (priv->minor - 1) * 4;
if (priv->highalarm & (1<<bit)) {
intr_cfg |= (regk_gio_hi << (intr * 3));
mask |= 1 << intr;
wanted_interrupts = mask & 0xff;
pins |= pin << (intr * 4);
} else if (priv->lowalarm & (1<<bit)) {
intr_cfg |= (regk_gio_lo << (intr * 3));
mask |= 1 << intr;
wanted_interrupts = mask & 0xff;
pins |= pin << (intr * 4);
}
}
REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg);
REG_WR_INT(gio, regi_gio, rw_intr_pins, pins);
REG_WR_INT(gio, regi_gio, rw_intr_mask, mask);
spin_unlock_irqrestore(&gpio_lock, flags);
}
static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
{
unsigned int mask = 0;
struct gpio_private *priv = file->private_data;
unsigned long data;
unsigned long tmp;
if (priv->minor >= GPIO_MINOR_PWM0 &&
priv->minor <= GPIO_MINOR_LAST_PWM)
return 0;
poll_wait(file, &priv->alarm_wq, wait);
if (priv->minor <= GPIO_MINOR_D) {
data = readl(data_in[priv->minor]);
REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts);
tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask);
tmp &= I2C_INTERRUPT_BITS;
tmp |= wanted_interrupts;
REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp);
} else
return 0;
if ((data & priv->highalarm) || (~data & priv->lowalarm))
mask = POLLIN|POLLRDNORM;
DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
return mask;
}
static irqreturn_t gpio_interrupt(int irq, void *dev_id)
{
reg_gio_rw_intr_mask intr_mask;
reg_gio_r_masked_intr masked_intr;
reg_gio_rw_ack_intr ack_intr;
unsigned long flags;
unsigned long tmp;
unsigned long tmp2;
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
unsigned char enable_gpiov_ack = 0;
#endif
/* Find what PA interrupts are active */
masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
/* Find those that we have enabled */
spin_lock_irqsave(&gpio_lock, flags);
tmp &= wanted_interrupts;
spin_unlock_irqrestore(&gpio_lock, flags);
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
/* Something changed on virtual GPIO. Interrupt is acked by
* reading the device.
*/
if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
sizeof(cached_virtual_gpio_read));
enable_gpiov_ack = 1;
}
#endif
/* Ack them */
ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
/* Disable those interrupts.. */
intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
tmp2 &= ~tmp;
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
/* Do not disable interrupt on virtual GPIO. Changes on virtual
* pins are only noticed by an interrupt.
*/
if (enable_gpiov_ack)
tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
#endif
intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
return IRQ_RETVAL(tmp);
}
static void gpio_write_bit(unsigned long *port, unsigned char data, int bit,
unsigned char clk_mask, unsigned char data_mask)
{
unsigned long shadow = readl(port) & ~clk_mask;
writel(shadow, port);
if (data & 1 << bit)
shadow |= data_mask;
else
shadow &= ~data_mask;
writel(shadow, port);
/* For FPGA: min 5.0ns (DCC) before CCLK high */
shadow |= clk_mask;
writel(shadow, port);
}
static void gpio_write_byte(struct gpio_private *priv, unsigned long *port,
unsigned char data)
{
int i;
if (priv->write_msb)
for (i = 7; i >= 0; i--)
gpio_write_bit(port, data, i, priv->clk_mask,
priv->data_mask);
else
for (i = 0; i <= 7; i++)
gpio_write_bit(port, data, i, priv->clk_mask,
priv->data_mask);
}
static ssize_t gpio_write(struct file *file, const char __user *buf,
size_t count, loff_t *off)
{
struct gpio_private *priv = file->private_data;
unsigned long flags;
ssize_t retval = count;
/* Only bits 0-7 may be used for write operations but allow all
devices except leds... */
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
if (priv->minor == GPIO_MINOR_V)
return -EFAULT;
#endif
if (priv->minor == GPIO_MINOR_LEDS)
return -EFAULT;
if (priv->minor >= GPIO_MINOR_PWM0 &&
priv->minor <= GPIO_MINOR_LAST_PWM)
return -EFAULT;
if (!access_ok(VERIFY_READ, buf, count))
return -EFAULT;
/* It must have been configured using the IO_CFG_WRITE_MODE */
/* Perhaps a better error code? */
if (priv->clk_mask == 0 || priv->data_mask == 0)
return -EPERM;
D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
"msb: %i\n",
count, priv->data_mask, priv->clk_mask, priv->write_msb));
spin_lock_irqsave(&gpio_lock, flags);
while (count--)
gpio_write_byte(priv, data_out[priv->minor], *buf++);
spin_unlock_irqrestore(&gpio_lock, flags);
return retval;
}
static int gpio_open(struct inode *inode, struct file *filp)
{
struct gpio_private *priv;
int p = iminor(inode);
if (p > GPIO_MINOR_LAST_PWM ||
(p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0))
return -EINVAL;
priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
mutex_lock(&gpio_mutex);
memset(priv, 0, sizeof(*priv));
priv->minor = p;
filp->private_data = priv;
/* initialize the io/alarm struct, not for PWM ports though */
if (p <= GPIO_MINOR_LAST) {
priv->clk_mask = 0;
priv->data_mask = 0;
priv->highalarm = 0;
priv->lowalarm = 0;
init_waitqueue_head(&priv->alarm_wq);
/* link it into our alarmlist */
spin_lock_irq(&gpio_lock);
priv->next = alarmlist;
alarmlist = priv;
spin_unlock_irq(&gpio_lock);
}
mutex_unlock(&gpio_mutex);
return 0;
}
static int gpio_release(struct inode *inode, struct file *filp)
{
struct gpio_private *p;
struct gpio_private *todel;
/* local copies while updating them: */
unsigned long a_high, a_low;
/* prepare to free private structure */
todel = filp->private_data;
/* unlink from alarmlist - only for non-PWM ports though */
if (todel->minor <= GPIO_MINOR_LAST) {
spin_lock_irq(&gpio_lock);
p = alarmlist;
if (p == todel)
alarmlist = todel->next;
else {
while (p->next != todel)
p = p->next;
p->next = todel->next;
}
/* Check if there are still any alarms set */
p = alarmlist;
a_high = 0;
a_low = 0;
while (p) {
if (p->minor == GPIO_MINOR_A) {
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
#endif
a_high |= p->highalarm;
a_low |= p->lowalarm;
}
p = p->next;
}
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
/* Variable 'a_low' needs to be set here again
* to ensure that interrupt for virtual GPIO is handled.
*/
a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
#endif
spin_unlock_irq(&gpio_lock);
}
kfree(todel);
return 0;
}
/* Main device API. ioctl's to read/set/clear bits, as well as to
* set alarms to wait for using a subsequent select().
*/
inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
{
/* Set direction 0=unchanged 1=input,
* return mask with 1=input
*/
unsigned long flags;
unsigned long dir_shadow;
spin_lock_irqsave(&gpio_lock, flags);
dir_shadow = readl(dir_oe[priv->minor]) &
~(arg & changeable_dir[priv->minor]);
writel(dir_shadow, dir_oe[priv->minor]);
spin_unlock_irqrestore(&gpio_lock, flags);
if (priv->minor == GPIO_MINOR_C)
dir_shadow ^= 0xFFFF; /* Only 16 bits */
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
else if (priv->minor == GPIO_MINOR_V)
dir_shadow ^= 0xFFFF; /* Only 16 bits */
#endif
else
dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */
return dir_shadow;
} /* setget_input */
static inline unsigned long setget_output(struct gpio_private *priv,
unsigned long arg)
{
unsigned long flags;
unsigned long dir_shadow;
spin_lock_irqsave(&gpio_lock, flags);
dir_shadow = readl(dir_oe[priv->minor]) |
(arg & changeable_dir[priv->minor]);
writel(dir_shadow, dir_oe[priv->minor]);
spin_unlock_irqrestore(&gpio_lock, flags);
return dir_shadow;
} /* setget_output */
static long gpio_ioctl_unlocked(struct file *file,
unsigned int cmd, unsigned long arg)
{
unsigned long flags;
unsigned long val;
unsigned long shadow;
struct gpio_private *priv = file->private_data;
if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
return -ENOTTY;
/* Check for special ioctl handlers first */
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
if (priv->minor == GPIO_MINOR_V)
return virtual_gpio_ioctl(file, cmd, arg);
#endif
if (priv->minor == GPIO_MINOR_LEDS)
return gpio_leds_ioctl(cmd, arg);
if (priv->minor >= GPIO_MINOR_PWM0 &&
priv->minor <= GPIO_MINOR_LAST_PWM)
return gpio_pwm_ioctl(priv, cmd, arg);
switch (_IOC_NR(cmd)) {
case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
/* Read the port. */
return readl(data_in[priv->minor]);
case IO_SETBITS:
spin_lock_irqsave(&gpio_lock, flags);
/* Set changeable bits with a 1 in arg. */
shadow = readl(data_out[priv->minor]) |
(arg & changeable_bits[priv->minor]);
writel(shadow, data_out[priv->minor]);
spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRBITS:
spin_lock_irqsave(&gpio_lock, flags);
/* Clear changeable bits with a 1 in arg. */
shadow = readl(data_out[priv->minor]) &
~(arg & changeable_bits[priv->minor]);
writel(shadow, data_out[priv->minor]);
spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
priv->highalarm |= arg;
gpio_set_alarm(priv);
break;
case IO_LOWALARM:
/* Set alarm when bits with 1 in arg go low. */
priv->lowalarm |= arg;
gpio_set_alarm(priv);
break;
case IO_CLRALARM:
/* Clear alarm for bits with 1 in arg. */
priv->highalarm &= ~arg;
priv->lowalarm &= ~arg;
gpio_set_alarm(priv);
break;
case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
/* Read direction 0=input 1=output */
return readl(dir_oe[priv->minor]);
case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
/* Set direction 0=unchanged 1=input,
* return mask with 1=input
*/
return setget_input(priv, arg);
case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
/* Set direction 0=unchanged 1=output,
* return mask with 1=output
*/
return setget_output(priv, arg);
case IO_CFG_WRITE_MODE:
{
int res = -EPERM;
unsigned long dir_shadow, clk_mask, data_mask, write_msb;
clk_mask = arg & 0xFF;
data_mask = (arg >> 8) & 0xFF;
write_msb = (arg >> 16) & 0x01;
/* Check if we're allowed to change the bits and
* the direction is correct
*/
spin_lock_irqsave(&gpio_lock, flags);
dir_shadow = readl(dir_oe[priv->minor]);
if ((clk_mask & changeable_bits[priv->minor]) &&
(data_mask & changeable_bits[priv->minor]) &&
(clk_mask & dir_shadow) &&
(data_mask & dir_shadow)) {
priv->clk_mask = clk_mask;
priv->data_mask = data_mask;
priv->write_msb = write_msb;
res = 0;
}
spin_unlock_irqrestore(&gpio_lock, flags);
return res;
}
case IO_READ_INBITS:
/* *arg is result of reading the input pins */
val = readl(data_in[priv->minor]);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
return 0;
case IO_READ_OUTBITS:
/* *arg is result of reading the output shadow */
val = *data_out[priv->minor];
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
break;
case IO_SETGET_INPUT:
/* bits set in *arg is set to input,
* *arg updated with current input pins.
*/
if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
return -EFAULT;
val = setget_input(priv, val);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
break;
case IO_SETGET_OUTPUT:
/* bits set in *arg is set to output,
* *arg updated with current output pins.
*/
if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
return -EFAULT;
val = setget_output(priv, val);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
break;
default:
return -EINVAL;
} /* switch */
return 0;
}
static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
mutex_lock(&gpio_mutex);
ret = gpio_ioctl_unlocked(file, cmd, arg);
mutex_unlock(&gpio_mutex);
return ret;
}
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
unsigned long flags;
unsigned short val;
unsigned short shadow;
struct gpio_private *priv = file->private_data;
switch (_IOC_NR(cmd)) {
case IO_SETBITS:
spin_lock_irqsave(&gpio_lock, flags);
/* Set changeable bits with a 1 in arg. */
i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
shadow |= ~readl(dir_oe[priv->minor]) |
(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRBITS:
spin_lock_irqsave(&gpio_lock, flags);
/* Clear changeable bits with a 1 in arg. */
i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
shadow |= ~readl(dir_oe[priv->minor]) &
~(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
priv->highalarm |= arg;
break;
case IO_LOWALARM:
/* Set alarm when bits with 1 in arg go low. */
priv->lowalarm |= arg;
break;
case IO_CLRALARM:
/* Clear alarm for bits with 1 in arg. */
priv->highalarm &= ~arg;
priv->lowalarm &= ~arg;
break;
case IO_CFG_WRITE_MODE:
{
unsigned long dir_shadow;
dir_shadow = readl(dir_oe[priv->minor]);
priv->clk_mask = arg & 0xFF;
priv->data_mask = (arg >> 8) & 0xFF;
priv->write_msb = (arg >> 16) & 0x01;
/* Check if we're allowed to change the bits and
* the direction is correct
*/
if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
(priv->data_mask & changeable_bits[priv->minor]) &&
(priv->clk_mask & dir_shadow) &&
(priv->data_mask & dir_shadow))) {
priv->clk_mask = 0;
priv->data_mask = 0;
return -EPERM;
}
break;
}
case IO_READ_INBITS:
/* *arg is result of reading the input pins */
val = cached_virtual_gpio_read & ~readl(dir_oe[priv->minor]);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
return 0;
case IO_READ_OUTBITS:
/* *arg is result of reading the output shadow */
i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
val &= readl(dir_oe[priv->minor]);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
break;
case IO_SETGET_INPUT:
{
/* bits set in *arg is set to input,
* *arg updated with current input pins.
*/
unsigned short input_mask = ~readl(dir_oe[priv->minor]);
if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
return -EFAULT;
val = setget_input(priv, val);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
if ((input_mask & val) != input_mask) {
/* Input pins changed. All ports desired as input
* should be set to logic 1.
*/
unsigned short change = input_mask ^ val;
i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
sizeof(shadow));
shadow &= ~change;
shadow |= val;
i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
sizeof(shadow));
}
break;
}
case IO_SETGET_OUTPUT:
/* bits set in *arg is set to output,
* *arg updated with current output pins.
*/
if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
return -EFAULT;
val = setget_output(priv, val);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
break;
default:
return -EINVAL;
} /* switch */
return 0;
}
#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
{
unsigned char green;
unsigned char red;
switch (_IOC_NR(cmd)) {
case IO_LEDACTIVE_SET:
green = ((unsigned char) arg) & 1;
red = (((unsigned char) arg) >> 1) & 1;
CRIS_LED_ACTIVE_SET_G(green);
CRIS_LED_ACTIVE_SET_R(red);
break;
default:
return -EINVAL;
} /* switch */
return 0;
}
static int gpio_pwm_set_mode(unsigned long arg, int pwm_port)
{
int pinmux_pwm = pinmux_pwm0 + pwm_port;
int mode;
reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = {
.ccd_val = 0,
.ccd_override = regk_gio_no,
.mode = regk_gio_no
};
int allocstatus;
if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode))
return -EFAULT;
rw_pwm_ctrl.mode = mode;
if (mode != PWM_OFF)
allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm);
else
allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm);
if (allocstatus)
return allocstatus;
REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) +
12 * pwm_port, rw_pwm_ctrl);
return 0;
}
static int gpio_pwm_set_period(unsigned long arg, int pwm_port)
{
struct io_pwm_set_period periods;
reg_gio_rw_pwm0_var rw_pwm_widths;
if (copy_from_user(&periods, (void __user *)arg, sizeof(periods)))
return -EFAULT;
if (periods.lo > 8191 || periods.hi > 8191)
return -EINVAL;
rw_pwm_widths.lo = periods.lo;
rw_pwm_widths.hi = periods.hi;
REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) +
12 * pwm_port, rw_pwm_widths);
return 0;
}
static int gpio_pwm_set_duty(unsigned long arg, int pwm_port)
{
unsigned int duty;
reg_gio_rw_pwm0_data rw_pwm_duty;
if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty))
return -EFAULT;
if (duty > 255)
return -EINVAL;
rw_pwm_duty.data = duty;
REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) +
12 * pwm_port, rw_pwm_duty);
return 0;
}
static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
unsigned long arg)
{
int pwm_port = priv->minor - GPIO_MINOR_PWM0;
switch (_IOC_NR(cmd)) {
case IO_PWM_SET_MODE:
return gpio_pwm_set_mode(arg, pwm_port);
case IO_PWM_SET_PERIOD:
return gpio_pwm_set_period(arg, pwm_port);
case IO_PWM_SET_DUTY:
return gpio_pwm_set_duty(arg, pwm_port);
default:
return -EINVAL;
}
return 0;
}
static const struct file_operations gpio_fops = {
.owner = THIS_MODULE,
.poll = gpio_poll,
.unlocked_ioctl = gpio_ioctl,
.write = gpio_write,
.open = gpio_open,
.release = gpio_release,
.llseek = noop_llseek,
};
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static void __init virtual_gpio_init(void)
{
reg_gio_rw_intr_cfg intr_cfg;
reg_gio_rw_intr_mask intr_mask;
unsigned short shadow;
shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
/* Set interrupt mask and on what state the interrupt shall trigger.
* For virtual gpio the interrupt shall trigger on logic '0'.
*/
intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
case 0:
intr_cfg.pa0 = regk_gio_lo;
intr_mask.pa0 = regk_gio_yes;
break;
case 1:
intr_cfg.pa1 = regk_gio_lo;
intr_mask.pa1 = regk_gio_yes;
break;
case 2:
intr_cfg.pa2 = regk_gio_lo;
intr_mask.pa2 = regk_gio_yes;
break;
case 3:
intr_cfg.pa3 = regk_gio_lo;
intr_mask.pa3 = regk_gio_yes;
break;
case 4:
intr_cfg.pa4 = regk_gio_lo;
intr_mask.pa4 = regk_gio_yes;
break;
case 5:
intr_cfg.pa5 = regk_gio_lo;
intr_mask.pa5 = regk_gio_yes;
break;
case 6:
intr_cfg.pa6 = regk_gio_lo;
intr_mask.pa6 = regk_gio_yes;
break;
case 7:
intr_cfg.pa7 = regk_gio_lo;
intr_mask.pa7 = regk_gio_yes;
break;
}
REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
}
#endif
/* main driver initialization routine, called from mem.c */
static int __init gpio_init(void)
{
int res, res2;
printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 "
"Axis Communications AB\n");
/* do the formalities */
res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
if (res < 0) {
printk(KERN_ERR "gpio: couldn't get a major number.\n");
return res;
}
/* Clear all leds */
CRIS_LED_NETWORK_GRP0_SET(0);
CRIS_LED_NETWORK_GRP1_SET(0);
CRIS_LED_ACTIVE_SET(0);
CRIS_LED_DISK_READ(0);
CRIS_LED_DISK_WRITE(0);
res2 = request_irq(GIO_INTR_VECT, gpio_interrupt,
IRQF_SHARED, "gpio", &alarmlist);
if (res2) {
printk(KERN_ERR "err: irq for gpio\n");
return res2;
}
/* No IRQs by default. */
REG_WR_INT(gio, regi_gio, rw_intr_pins, 0);
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
virtual_gpio_init();
#endif
return res;
}
/* this makes sure that gpio_init is called during kernel boot */
module_init(gpio_init);
arch/cris/arch-v32/drivers/mach-fs/Makefile
View file @ 0921f1ef
...@@ -3,4 +3,3 @@ ...@@ -3,4 +3,3 @@
# #
obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o
obj-$(CONFIG_ETRAX_GPIO) += gpio.o
arch/cris/arch-v32/drivers/mach-fs/gpio.c deleted 100644 → 0
View file @ 15f93405
/*
* ETRAX CRISv32 general port I/O device
*
* Copyright (c) 1999-2006 Axis Communications AB
*
* Authors: Bjorn Wesen (initial version)
* Ola Knutsson (LED handling)
* Johan Adolfsson (read/set directions, write, port G,
* port to ETRAX FS.
*
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <asm/etraxgpio.h>
#include <hwregs/reg_map.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/gio_defs.h>
#include <hwregs/intr_vect_defs.h>
#include <asm/io.h>
#include <asm/irq.h>
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
#include "../i2c.h"
#define VIRT_I2C_ADDR 0x40
#endif
/* The following gio ports on ETRAX FS is available:
* pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge
* pb 18 bits
* pc 18 bits
* pd 18 bits
* pe 18 bits
* each port has a rw_px_dout, r_px_din and rw_px_oe register.
*/
#define GPIO_MAJOR 120 /* experimental MAJOR number */
#define D(x)
#if 0
static int dp_cnt;
#define DP(x) \
do { \
dp_cnt++; \
if (dp_cnt % 1000 == 0) \
x; \
} while (0)
#else
#define DP(x)
#endif
static DEFINE_MUTEX(gpio_mutex);
static char gpio_name[] = "etrax gpio";
#if 0
static wait_queue_head_t *gpio_wq;
#endif
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg);
#endif
static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
loff_t *off);
static int gpio_open(struct inode *inode, struct file *filp);
static int gpio_release(struct inode *inode, struct file *filp);
static unsigned int gpio_poll(struct file *filp,
struct poll_table_struct *wait);
/* private data per open() of this driver */
struct gpio_private {
struct gpio_private *next;
/* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
unsigned char clk_mask;
unsigned char data_mask;
unsigned char write_msb;
unsigned char pad1;
/* These fields are generic */
unsigned long highalarm, lowalarm;
wait_queue_head_t alarm_wq;
int minor;
};
/* linked list of alarms to check for */
static struct gpio_private *alarmlist;
static int gpio_some_alarms; /* Set if someone uses alarm */
static unsigned long gpio_pa_high_alarms;
static unsigned long gpio_pa_low_alarms;
static DEFINE_SPINLOCK(alarm_lock);
#define NUM_PORTS (GPIO_MINOR_LAST+1)
#define GIO_REG_RD_ADDR(reg) \
(volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
#define GIO_REG_WR_ADDR(reg) \
(volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
unsigned long led_dummy;
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static unsigned long virtual_dummy;
static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
static unsigned short cached_virtual_gpio_read;
#endif
static volatile unsigned long *data_out[NUM_PORTS] = {
GIO_REG_WR_ADDR(rw_pa_dout),
GIO_REG_WR_ADDR(rw_pb_dout),
&led_dummy,
GIO_REG_WR_ADDR(rw_pc_dout),
GIO_REG_WR_ADDR(rw_pd_dout),
GIO_REG_WR_ADDR(rw_pe_dout),
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
&virtual_dummy,
#endif
};
static volatile unsigned long *data_in[NUM_PORTS] = {
GIO_REG_RD_ADDR(r_pa_din),
GIO_REG_RD_ADDR(r_pb_din),
&led_dummy,
GIO_REG_RD_ADDR(r_pc_din),
GIO_REG_RD_ADDR(r_pd_din),
GIO_REG_RD_ADDR(r_pe_din),
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
&virtual_dummy,
#endif
};
static unsigned long changeable_dir[NUM_PORTS] = {
CONFIG_ETRAX_PA_CHANGEABLE_DIR,
CONFIG_ETRAX_PB_CHANGEABLE_DIR,
0,
CONFIG_ETRAX_PC_CHANGEABLE_DIR,
CONFIG_ETRAX_PD_CHANGEABLE_DIR,
CONFIG_ETRAX_PE_CHANGEABLE_DIR,
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
CONFIG_ETRAX_PV_CHANGEABLE_DIR,
#endif
};
static unsigned long changeable_bits[NUM_PORTS] = {
CONFIG_ETRAX_PA_CHANGEABLE_BITS,
CONFIG_ETRAX_PB_CHANGEABLE_BITS,
0,
CONFIG_ETRAX_PC_CHANGEABLE_BITS,
CONFIG_ETRAX_PD_CHANGEABLE_BITS,
CONFIG_ETRAX_PE_CHANGEABLE_BITS,
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
CONFIG_ETRAX_PV_CHANGEABLE_BITS,
#endif
};
static volatile unsigned long *dir_oe[NUM_PORTS] = {
GIO_REG_WR_ADDR(rw_pa_oe),
GIO_REG_WR_ADDR(rw_pb_oe),
&led_dummy,
GIO_REG_WR_ADDR(rw_pc_oe),
GIO_REG_WR_ADDR(rw_pd_oe),
GIO_REG_WR_ADDR(rw_pe_oe),
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
&virtual_rw_pv_oe,
#endif
};
static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
{
unsigned int mask = 0;
struct gpio_private *priv = file->private_data;
unsigned long data;
poll_wait(file, &priv->alarm_wq, wait);
if (priv->minor == GPIO_MINOR_A) {
reg_gio_rw_intr_cfg intr_cfg;
unsigned long tmp;
unsigned long flags;
local_irq_save(flags);
data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din,
REG_RD(gio, regi_gio, r_pa_din));
/* PA has support for interrupt
* lets activate high for those low and with highalarm set
*/
intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
tmp = ~data & priv->highalarm & 0xFF;
if (tmp & (1 << 0))
intr_cfg.pa0 = regk_gio_hi;
if (tmp & (1 << 1))
intr_cfg.pa1 = regk_gio_hi;
if (tmp & (1 << 2))
intr_cfg.pa2 = regk_gio_hi;
if (tmp & (1 << 3))
intr_cfg.pa3 = regk_gio_hi;
if (tmp & (1 << 4))
intr_cfg.pa4 = regk_gio_hi;
if (tmp & (1 << 5))
intr_cfg.pa5 = regk_gio_hi;
if (tmp & (1 << 6))
intr_cfg.pa6 = regk_gio_hi;
if (tmp & (1 << 7))
intr_cfg.pa7 = regk_gio_hi;
/*
* lets activate low for those high and with lowalarm set
*/
tmp = data & priv->lowalarm & 0xFF;
if (tmp & (1 << 0))
intr_cfg.pa0 = regk_gio_lo;
if (tmp & (1 << 1))
intr_cfg.pa1 = regk_gio_lo;
if (tmp & (1 << 2))
intr_cfg.pa2 = regk_gio_lo;
if (tmp & (1 << 3))
intr_cfg.pa3 = regk_gio_lo;
if (tmp & (1 << 4))
intr_cfg.pa4 = regk_gio_lo;
if (tmp & (1 << 5))
intr_cfg.pa5 = regk_gio_lo;
if (tmp & (1 << 6))
intr_cfg.pa6 = regk_gio_lo;
if (tmp & (1 << 7))
intr_cfg.pa7 = regk_gio_lo;
REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
local_irq_restore(flags);
} else if (priv->minor <= GPIO_MINOR_E)
data = *data_in[priv->minor];
else
return 0;
if ((data & priv->highalarm) || (~data & priv->lowalarm))
mask = POLLIN|POLLRDNORM;
DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
return mask;
}
int etrax_gpio_wake_up_check(void)
{
struct gpio_private *priv;
unsigned long data = 0;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&alarm_lock, flags);
priv = alarmlist;
while (priv) {
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
if (priv->minor == GPIO_MINOR_V)
data = (unsigned long)cached_virtual_gpio_read;
else {
data = *data_in[priv->minor];
if (priv->minor == GPIO_MINOR_A)
priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
}
#else
data = *data_in[priv->minor];
#endif
if ((data & priv->highalarm) ||
(~data & priv->lowalarm)) {
DP(printk(KERN_DEBUG
"etrax_gpio_wake_up_check %i\n", priv->minor));
wake_up_interruptible(&priv->alarm_wq);
ret = 1;
}
priv = priv->next;
}
spin_unlock_irqrestore(&alarm_lock, flags);
return ret;
}
static irqreturn_t
gpio_poll_timer_interrupt(int irq, void *dev_id)
{
if (gpio_some_alarms)
return IRQ_RETVAL(etrax_gpio_wake_up_check());
return IRQ_NONE;
}
static irqreturn_t
gpio_pa_interrupt(int irq, void *dev_id)
{
reg_gio_rw_intr_mask intr_mask;
reg_gio_r_masked_intr masked_intr;
reg_gio_rw_ack_intr ack_intr;
unsigned long tmp;
unsigned long tmp2;
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
unsigned char enable_gpiov_ack = 0;
#endif
/* Find what PA interrupts are active */
masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
/* Find those that we have enabled */
spin_lock(&alarm_lock);
tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms);
spin_unlock(&alarm_lock);
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
/* Something changed on virtual GPIO. Interrupt is acked by
* reading the device.
*/
if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
sizeof(cached_virtual_gpio_read));
enable_gpiov_ack = 1;
}
#endif
/* Ack them */
ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
/* Disable those interrupts.. */
intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
tmp2 &= ~tmp;
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
/* Do not disable interrupt on virtual GPIO. Changes on virtual
* pins are only noticed by an interrupt.
*/
if (enable_gpiov_ack)
tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
#endif
intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
if (gpio_some_alarms)
return IRQ_RETVAL(etrax_gpio_wake_up_check());
return IRQ_NONE;
}
static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
loff_t *off)
{
struct gpio_private *priv = file->private_data;
unsigned char data, clk_mask, data_mask, write_msb;
unsigned long flags;
unsigned long shadow;
volatile unsigned long *port;
ssize_t retval = count;
/* Only bits 0-7 may be used for write operations but allow all
devices except leds... */
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
if (priv->minor == GPIO_MINOR_V)
return -EFAULT;
#endif
if (priv->minor == GPIO_MINOR_LEDS)
return -EFAULT;
if (!access_ok(VERIFY_READ, buf, count))
return -EFAULT;
clk_mask = priv->clk_mask;
data_mask = priv->data_mask;
/* It must have been configured using the IO_CFG_WRITE_MODE */
/* Perhaps a better error code? */
if (clk_mask == 0 || data_mask == 0)
return -EPERM;
write_msb = priv->write_msb;
D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
"msb: %i\n", count, data_mask, clk_mask, write_msb));
port = data_out[priv->minor];
while (count--) {
int i;
data = *buf++;
if (priv->write_msb) {
for (i = 7; i >= 0; i--) {
local_irq_save(flags);
shadow = *port;
*port = shadow &= ~clk_mask;
if (data & 1<<i)
*port = shadow |= data_mask;
else
*port = shadow &= ~data_mask;
/* For FPGA: min 5.0ns (DCC) before CCLK high */
*port = shadow |= clk_mask;
local_irq_restore(flags);
}
} else {
for (i = 0; i <= 7; i++) {
local_irq_save(flags);
shadow = *port;
*port = shadow &= ~clk_mask;
if (data & 1<<i)
*port = shadow |= data_mask;
else
*port = shadow &= ~data_mask;
/* For FPGA: min 5.0ns (DCC) before CCLK high */
*port = shadow |= clk_mask;
local_irq_restore(flags);
}
}
}
return retval;
}
static int
gpio_open(struct inode *inode, struct file *filp)
{
struct gpio_private *priv;
int p = iminor(inode);
if (p > GPIO_MINOR_LAST)
return -EINVAL;
priv = kzalloc(sizeof(struct gpio_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
mutex_lock(&gpio_mutex);
priv->minor = p;
/* initialize the io/alarm struct */
priv->clk_mask = 0;
priv->data_mask = 0;
priv->highalarm = 0;
priv->lowalarm = 0;
init_waitqueue_head(&priv->alarm_wq);
filp->private_data = (void *)priv;
/* link it into our alarmlist */
spin_lock_irq(&alarm_lock);
priv->next = alarmlist;
alarmlist = priv;
spin_unlock_irq(&alarm_lock);
mutex_unlock(&gpio_mutex);
return 0;
}
static int
gpio_release(struct inode *inode, struct file *filp)
{
struct gpio_private *p;
struct gpio_private *todel;
/* local copies while updating them: */
unsigned long a_high, a_low;
unsigned long some_alarms;
/* unlink from alarmlist and free the private structure */
spin_lock_irq(&alarm_lock);
p = alarmlist;
todel = filp->private_data;
if (p == todel) {
alarmlist = todel->next;
} else {
while (p->next != todel)
p = p->next;
p->next = todel->next;
}
kfree(todel);
/* Check if there are still any alarms set */
p = alarmlist;
some_alarms = 0;
a_high = 0;
a_low = 0;
while (p) {
if (p->minor == GPIO_MINOR_A) {
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
#endif
a_high |= p->highalarm;
a_low |= p->lowalarm;
}
if (p->highalarm | p->lowalarm)
some_alarms = 1;
p = p->next;
}
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
/* Variables 'some_alarms' and 'a_low' needs to be set here again
* to ensure that interrupt for virtual GPIO is handled.
*/
some_alarms = 1;
a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
#endif
gpio_some_alarms = some_alarms;
gpio_pa_high_alarms = a_high;
gpio_pa_low_alarms = a_low;
spin_unlock_irq(&alarm_lock);
return 0;
}
/* Main device API. ioctl's to read/set/clear bits, as well as to
* set alarms to wait for using a subsequent select().
*/
inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
{
/* Set direction 0=unchanged 1=input,
* return mask with 1=input
*/
unsigned long flags;
unsigned long dir_shadow;
local_irq_save(flags);
dir_shadow = *dir_oe[priv->minor];
dir_shadow &= ~(arg & changeable_dir[priv->minor]);
*dir_oe[priv->minor] = dir_shadow;
local_irq_restore(flags);
if (priv->minor == GPIO_MINOR_A)
dir_shadow ^= 0xFF; /* Only 8 bits */
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
else if (priv->minor == GPIO_MINOR_V)
dir_shadow ^= 0xFFFF; /* Only 16 bits */
#endif
else
dir_shadow ^= 0x3FFFF; /* Only 18 bits */
return dir_shadow;
} /* setget_input */
inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
{
unsigned long flags;
unsigned long dir_shadow;
local_irq_save(flags);
dir_shadow = *dir_oe[priv->minor];
dir_shadow |= (arg & changeable_dir[priv->minor]);
*dir_oe[priv->minor] = dir_shadow;
local_irq_restore(flags);
return dir_shadow;
} /* setget_output */
static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
static int
gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned long flags;
unsigned long val;
unsigned long shadow;
struct gpio_private *priv = file->private_data;
if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
return -EINVAL;
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
if (priv->minor == GPIO_MINOR_V)
return virtual_gpio_ioctl(file, cmd, arg);
#endif
switch (_IOC_NR(cmd)) {
case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
/* Read the port. */
return *data_in[priv->minor];
break;
case IO_SETBITS:
local_irq_save(flags);
/* Set changeable bits with a 1 in arg. */
shadow = *data_out[priv->minor];
shadow |= (arg & changeable_bits[priv->minor]);
*data_out[priv->minor] = shadow;
local_irq_restore(flags);
break;
case IO_CLRBITS:
local_irq_save(flags);
/* Clear changeable bits with a 1 in arg. */
shadow = *data_out[priv->minor];
shadow &= ~(arg & changeable_bits[priv->minor]);
*data_out[priv->minor] = shadow;
local_irq_restore(flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
priv->highalarm |= arg;
spin_lock_irqsave(&alarm_lock, flags);
gpio_some_alarms = 1;
if (priv->minor == GPIO_MINOR_A)
gpio_pa_high_alarms |= arg;
spin_unlock_irqrestore(&alarm_lock, flags);
break;
case IO_LOWALARM:
/* Set alarm when bits with 1 in arg go low. */
priv->lowalarm |= arg;
spin_lock_irqsave(&alarm_lock, flags);
gpio_some_alarms = 1;
if (priv->minor == GPIO_MINOR_A)
gpio_pa_low_alarms |= arg;
spin_unlock_irqrestore(&alarm_lock, flags);
break;
case IO_CLRALARM:
/* Clear alarm for bits with 1 in arg. */
priv->highalarm &= ~arg;
priv->lowalarm &= ~arg;
spin_lock_irqsave(&alarm_lock, flags);
if (priv->minor == GPIO_MINOR_A) {
if (gpio_pa_high_alarms & arg ||
gpio_pa_low_alarms & arg)
/* Must update the gpio_pa_*alarms masks */
;
}
spin_unlock_irqrestore(&alarm_lock, flags);
break;
case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
/* Read direction 0=input 1=output */
return *dir_oe[priv->minor];
case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
/* Set direction 0=unchanged 1=input,
* return mask with 1=input
*/
return setget_input(priv, arg);
break;
case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
/* Set direction 0=unchanged 1=output,
* return mask with 1=output
*/
return setget_output(priv, arg);
case IO_CFG_WRITE_MODE:
{
unsigned long dir_shadow;
dir_shadow = *dir_oe[priv->minor];
priv->clk_mask = arg & 0xFF;
priv->data_mask = (arg >> 8) & 0xFF;
priv->write_msb = (arg >> 16) & 0x01;
/* Check if we're allowed to change the bits and
* the direction is correct
*/
if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
(priv->data_mask & changeable_bits[priv->minor]) &&
(priv->clk_mask & dir_shadow) &&
(priv->data_mask & dir_shadow))) {
priv->clk_mask = 0;
priv->data_mask = 0;
return -EPERM;
}
break;
}
case IO_READ_INBITS:
/* *arg is result of reading the input pins */
val = *data_in[priv->minor];
if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
return -EFAULT;
return 0;
break;
case IO_READ_OUTBITS:
/* *arg is result of reading the output shadow */
val = *data_out[priv->minor];
if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
return -EFAULT;
break;
case IO_SETGET_INPUT:
/* bits set in *arg is set to input,
* *arg updated with current input pins.
*/
if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
return -EFAULT;
val = setget_input(priv, val);
if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
return -EFAULT;
break;
case IO_SETGET_OUTPUT:
/* bits set in *arg is set to output,
* *arg updated with current output pins.
*/
if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
return -EFAULT;
val = setget_output(priv, val);
if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
return -EFAULT;
break;
default:
if (priv->minor == GPIO_MINOR_LEDS)
return gpio_leds_ioctl(cmd, arg);
else
return -EINVAL;
} /* switch */
return 0;
}
static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
mutex_lock(&gpio_mutex);
ret = gpio_ioctl_unlocked(file, cmd, arg);
mutex_unlock(&gpio_mutex);
return ret;
}
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static int
virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned long flags;
unsigned short val;
unsigned short shadow;
struct gpio_private *priv = file->private_data;
switch (_IOC_NR(cmd)) {
case IO_SETBITS:
local_irq_save(flags);
/* Set changeable bits with a 1 in arg. */
i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
shadow |= ~*dir_oe[priv->minor];
shadow |= (arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
local_irq_restore(flags);
break;
case IO_CLRBITS:
local_irq_save(flags);
/* Clear changeable bits with a 1 in arg. */
i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
shadow |= ~*dir_oe[priv->minor];
shadow &= ~(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
local_irq_restore(flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
priv->highalarm |= arg;
spin_lock(&alarm_lock);
gpio_some_alarms = 1;
spin_unlock(&alarm_lock);
break;
case IO_LOWALARM:
/* Set alarm when bits with 1 in arg go low. */
priv->lowalarm |= arg;
spin_lock(&alarm_lock);
gpio_some_alarms = 1;
spin_unlock(&alarm_lock);
break;
case IO_CLRALARM:
/* Clear alarm for bits with 1 in arg. */
priv->highalarm &= ~arg;
priv->lowalarm &= ~arg;
spin_lock(&alarm_lock);
spin_unlock(&alarm_lock);
break;
case IO_CFG_WRITE_MODE:
{
unsigned long dir_shadow;
dir_shadow = *dir_oe[priv->minor];
priv->clk_mask = arg & 0xFF;
priv->data_mask = (arg >> 8) & 0xFF;
priv->write_msb = (arg >> 16) & 0x01;
/* Check if we're allowed to change the bits and
* the direction is correct
*/
if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
(priv->data_mask & changeable_bits[priv->minor]) &&
(priv->clk_mask & dir_shadow) &&
(priv->data_mask & dir_shadow))) {
priv->clk_mask = 0;
priv->data_mask = 0;
return -EPERM;
}
break;
}
case IO_READ_INBITS:
/* *arg is result of reading the input pins */
val = cached_virtual_gpio_read;
val &= ~*dir_oe[priv->minor];
if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
return -EFAULT;
return 0;
break;
case IO_READ_OUTBITS:
/* *arg is result of reading the output shadow */
i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
val &= *dir_oe[priv->minor];
if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
return -EFAULT;
break;
case IO_SETGET_INPUT:
{
/* bits set in *arg is set to input,
* *arg updated with current input pins.
*/
unsigned short input_mask = ~*dir_oe[priv->minor];
if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
return -EFAULT;
val = setget_input(priv, val);
if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
return -EFAULT;
if ((input_mask & val) != input_mask) {
/* Input pins changed. All ports desired as input
* should be set to logic 1.
*/
unsigned short change = input_mask ^ val;
i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
sizeof(shadow));
shadow &= ~change;
shadow |= val;
i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
sizeof(shadow));
}
break;
}
case IO_SETGET_OUTPUT:
/* bits set in *arg is set to output,
* *arg updated with current output pins.
*/
if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
return -EFAULT;
val = setget_output(priv, val);
if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
return -EFAULT;
break;
default:
return -EINVAL;
} /* switch */
return 0;
}
#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
static int
gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
{
unsigned char green;
unsigned char red;
switch (_IOC_NR(cmd)) {
case IO_LEDACTIVE_SET:
green = ((unsigned char) arg) & 1;
red = (((unsigned char) arg) >> 1) & 1;
CRIS_LED_ACTIVE_SET_G(green);
CRIS_LED_ACTIVE_SET_R(red);
break;
default:
return -EINVAL;
} /* switch */
return 0;
}
static const struct file_operations gpio_fops = {
.owner = THIS_MODULE,
.poll = gpio_poll,
.unlocked_ioctl = gpio_ioctl,
.write = gpio_write,
.open = gpio_open,
.release = gpio_release,
.llseek = noop_llseek,
};
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static void
virtual_gpio_init(void)
{
reg_gio_rw_intr_cfg intr_cfg;
reg_gio_rw_intr_mask intr_mask;
unsigned short shadow;
shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
/* Set interrupt mask and on what state the interrupt shall trigger.
* For virtual gpio the interrupt shall trigger on logic '0'.
*/
intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
case 0:
intr_cfg.pa0 = regk_gio_lo;
intr_mask.pa0 = regk_gio_yes;
break;
case 1:
intr_cfg.pa1 = regk_gio_lo;
intr_mask.pa1 = regk_gio_yes;
break;
case 2:
intr_cfg.pa2 = regk_gio_lo;
intr_mask.pa2 = regk_gio_yes;
break;
case 3:
intr_cfg.pa3 = regk_gio_lo;
intr_mask.pa3 = regk_gio_yes;
break;
case 4:
intr_cfg.pa4 = regk_gio_lo;
intr_mask.pa4 = regk_gio_yes;
break;
case 5:
intr_cfg.pa5 = regk_gio_lo;
intr_mask.pa5 = regk_gio_yes;
break;
case 6:
intr_cfg.pa6 = regk_gio_lo;
intr_mask.pa6 = regk_gio_yes;
break;
case 7:
intr_cfg.pa7 = regk_gio_lo;
intr_mask.pa7 = regk_gio_yes;
break;
}
REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
gpio_some_alarms = 1;
}
#endif
/* main driver initialization routine, called from mem.c */
static __init int
gpio_init(void)
{
int res;
/* do the formalities */
res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
if (res < 0) {
printk(KERN_ERR "gpio: couldn't get a major number.\n");
return res;
}
/* Clear all leds */
CRIS_LED_NETWORK_GRP0_SET(0);
CRIS_LED_NETWORK_GRP1_SET(0);
CRIS_LED_ACTIVE_SET(0);
CRIS_LED_DISK_READ(0);
CRIS_LED_DISK_WRITE(0);
printk(KERN_INFO "ETRAX FS GPIO driver v2.5, (c) 2003-2007 "
"Axis Communications AB\n");
/* We call etrax_gpio_wake_up_check() from timer interrupt */
if (request_irq(TIMER0_INTR_VECT, gpio_poll_timer_interrupt,
IRQF_SHARED, "gpio poll", &alarmlist))
printk(KERN_ERR "timer0 irq for gpio\n");
if (request_irq(GIO_INTR_VECT, gpio_pa_interrupt,
IRQF_SHARED, "gpio PA", &alarmlist))
printk(KERN_ERR "PA irq for gpio\n");
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
virtual_gpio_init();
#endif
return res;
}
/* this makes sure that gpio_init is called during kernel boot */
module_init(gpio_init);
arch/cris/arch-v32/kernel/crisksyms.c
View file @ 0921f1ef
...@@ -3,7 +3,6 @@ ...@@ -3,7 +3,6 @@
#include <arch/dma.h> #include <arch/dma.h>
#include <arch/intmem.h> #include <arch/intmem.h>
#include <mach/pinmux.h> #include <mach/pinmux.h>
#include <arch/io.h>
/* Functions for allocating DMA channels */ /* Functions for allocating DMA channels */
EXPORT_SYMBOL(crisv32_request_dma); EXPORT_SYMBOL(crisv32_request_dma);
...@@ -20,8 +19,6 @@ EXPORT_SYMBOL(crisv32_pinmux_alloc); ...@@ -20,8 +19,6 @@ EXPORT_SYMBOL(crisv32_pinmux_alloc);
EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed); EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed);
EXPORT_SYMBOL(crisv32_pinmux_dealloc); EXPORT_SYMBOL(crisv32_pinmux_dealloc);
EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed); EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed);
EXPORT_SYMBOL(crisv32_io_get_name);
EXPORT_SYMBOL(crisv32_io_get);
/* Functions masking/unmasking interrupts */ /* Functions masking/unmasking interrupts */
EXPORT_SYMBOL(crisv32_mask_irq); EXPORT_SYMBOL(crisv32_mask_irq);
......
arch/cris/arch-v32/kernel/debugport.c
View file @ 0921f1ef
...@@ -77,8 +77,6 @@ static struct dbg_port *port = ...@@ -77,8 +77,6 @@ static struct dbg_port *port =
&ports[2]; &ports[2];
#elif defined(CONFIG_ETRAX_DEBUG_PORT3) #elif defined(CONFIG_ETRAX_DEBUG_PORT3)
&ports[3]; &ports[3];
#elif defined(CONFIG_ETRAX_DEBUG_PORT4)
&ports[4];
#else #else
NULL; NULL;
#endif #endif
......
arch/cris/arch-v32/kernel/head.S
View file @ 0921f1ef
...@@ -292,11 +292,7 @@ _no_romfs_in_flash: ...@@ -292,11 +292,7 @@ _no_romfs_in_flash:
;; For cramfs, partition starts with magic and length. ;; For cramfs, partition starts with magic and length.
;; For jffs2, a jhead is prepended which contains with magic and length. ;; For jffs2, a jhead is prepended which contains with magic and length.
;; The jhead is not part of the jffs2 partition however. ;; The jhead is not part of the jffs2 partition however.
#ifndef CONFIG_ETRAXFS_SIM
move.d __bss_start, $r0 move.d __bss_start, $r0
#else
move.d __end, $r0
#endif
move.d [$r0], $r1 move.d [$r0], $r1
cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic? cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic?
beq 2f ; yes, jump beq 2f ; yes, jump
......
arch/cris/arch-v32/kernel/irq.c
View file @ 0921f1ef
...@@ -37,7 +37,7 @@ ...@@ -37,7 +37,7 @@
#define IGNOREMASK (1 << (SER0_INTR_VECT - FIRST_IRQ)) #define IGNOREMASK (1 << (SER0_INTR_VECT - FIRST_IRQ))
#elif defined(CONFIG_ETRAX_KGDB_PORT1) #elif defined(CONFIG_ETRAX_KGDB_PORT1)
#define IGNOREMASK (1 << (SER1_INTR_VECT - FIRST_IRQ)) #define IGNOREMASK (1 << (SER1_INTR_VECT - FIRST_IRQ))
#elif defined(CONFIG_ETRAX_KGB_PORT2) #elif defined(CONFIG_ETRAX_KGDB_PORT2)
#define IGNOREMASK (1 << (SER2_INTR_VECT - FIRST_IRQ)) #define IGNOREMASK (1 << (SER2_INTR_VECT - FIRST_IRQ))
#elif defined(CONFIG_ETRAX_KGDB_PORT3) #elif defined(CONFIG_ETRAX_KGDB_PORT3)
#define IGNOREMASK (1 << (SER3_INTR_VECT - FIRST_IRQ)) #define IGNOREMASK (1 << (SER3_INTR_VECT - FIRST_IRQ))
...@@ -464,14 +464,14 @@ init_IRQ(void) ...@@ -464,14 +464,14 @@ init_IRQ(void)
etrax_irv->v[i] = weird_irq; etrax_irv->v[i] = weird_irq;
np = of_find_compatible_node(NULL, NULL, "axis,crisv32-intc"); np = of_find_compatible_node(NULL, NULL, "axis,crisv32-intc");
domain = irq_domain_add_legacy(np, NR_IRQS - FIRST_IRQ, domain = irq_domain_add_legacy(np, NBR_INTR_VECT - FIRST_IRQ,
FIRST_IRQ, FIRST_IRQ, FIRST_IRQ, FIRST_IRQ,
&crisv32_irq_ops, NULL); &crisv32_irq_ops, NULL);
BUG_ON(!domain); BUG_ON(!domain);
irq_set_default_host(domain); irq_set_default_host(domain);
of_node_put(np); of_node_put(np);
for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) { for (i = FIRST_IRQ, j = 0; j < NBR_INTR_VECT; i++, j++) {
set_exception_vector(i, interrupt[j]); set_exception_vector(i, interrupt[j]);
} }
......
arch/cris/arch-v32/kernel/kgdb.c
View file @ 0921f1ef
...@@ -384,19 +384,11 @@ int getDebugChar(void); ...@@ -384,19 +384,11 @@ int getDebugChar(void);
/* Serial port, writes one character. ETRAX 100 specific. from debugport.c */ /* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
void putDebugChar(int val); void putDebugChar(int val);
/* Returns the integer equivalent of a hexadecimal character. */
static int hex(char ch);
/* Convert the memory, pointed to by mem into hexadecimal representation. /* Convert the memory, pointed to by mem into hexadecimal representation.
Put the result in buf, and return a pointer to the last character Put the result in buf, and return a pointer to the last character
in buf (null). */ in buf (null). */
static char *mem2hex(char *buf, unsigned char *mem, int count); static char *mem2hex(char *buf, unsigned char *mem, int count);
/* Convert the array, in hexadecimal representation, pointed to by buf into
binary representation. Put the result in mem, and return a pointer to
the character after the last byte written. */
static unsigned char *hex2mem(unsigned char *mem, char *buf, int count);
/* Put the content of the array, in binary representation, pointed to by buf /* Put the content of the array, in binary representation, pointed to by buf
into memory pointed to by mem, and return a pointer to into memory pointed to by mem, and return a pointer to
the character after the last byte written. */ the character after the last byte written. */
...@@ -449,7 +441,7 @@ static char output_buffer[BUFMAX]; ...@@ -449,7 +441,7 @@ static char output_buffer[BUFMAX];
/* Error and warning messages. */ /* Error and warning messages. */
enum error_type enum error_type
{ {
SUCCESS, E01, E02, E03, E04, E05, E06, SUCCESS, E01, E02, E03, E04, E05, E06, E07, E08
}; };
static char *error_message[] = static char *error_message[] =
...@@ -461,6 +453,8 @@ static char *error_message[] = ...@@ -461,6 +453,8 @@ static char *error_message[] =
"E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.", "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
"E05 Change register content - P - the register is not implemented..", "E05 Change register content - P - the register is not implemented..",
"E06 Change memory content - M - internal error.", "E06 Change memory content - M - internal error.",
"E07 Change register content - P - the register is not stored on the stack",
"E08 Invalid parameter"
}; };
/********************************** Breakpoint *******************************/ /********************************** Breakpoint *******************************/
...@@ -539,7 +533,7 @@ gdb_cris_strtol(const char *s, char **endptr, int base) ...@@ -539,7 +533,7 @@ gdb_cris_strtol(const char *s, char **endptr, int base)
/********************************* Register image ****************************/ /********************************* Register image ****************************/
/* Write a value to a specified register in the register image of the current /* Write a value to a specified register in the register image of the current
thread. Returns status code SUCCESS, E02 or E05. */ thread. Returns status code SUCCESS, E02, E05 or E08. */
static int static int
write_register(int regno, char *val) write_register(int regno, char *val)
{ {
...@@ -547,8 +541,9 @@ write_register(int regno, char *val) ...@@ -547,8 +541,9 @@ write_register(int regno, char *val)
if (regno >= R0 && regno <= ACR) { if (regno >= R0 && regno <= ACR) {
/* Consecutive 32-bit registers. */ /* Consecutive 32-bit registers. */
hex2mem((unsigned char *)&reg.r0 + (regno - R0) * sizeof(unsigned int), if (hex2bin((unsigned char *)&reg.r0 + (regno - R0) * sizeof(unsigned int),
val, sizeof(unsigned int)); val, sizeof(unsigned int)))
status = E08;
} else if (regno == BZ || regno == VR || regno == WZ || regno == DZ) { } else if (regno == BZ || regno == VR || regno == WZ || regno == DZ) {
/* Read-only registers. */ /* Read-only registers. */
...@@ -557,16 +552,19 @@ write_register(int regno, char *val) ...@@ -557,16 +552,19 @@ write_register(int regno, char *val)
} else if (regno == PID) { } else if (regno == PID) {
/* 32-bit register. (Even though we already checked SRS and WZ, we cannot /* 32-bit register. (Even though we already checked SRS and WZ, we cannot
combine this with the EXS - SPC write since SRS and WZ have different size.) */ combine this with the EXS - SPC write since SRS and WZ have different size.) */
hex2mem((unsigned char *)&reg.pid, val, sizeof(unsigned int)); if (hex2bin((unsigned char *)&reg.pid, val, sizeof(unsigned int)))
status = E08;
} else if (regno == SRS) { } else if (regno == SRS) {
/* 8-bit register. */ /* 8-bit register. */
hex2mem((unsigned char *)&reg.srs, val, sizeof(unsigned char)); if (hex2bin((unsigned char *)&reg.srs, val, sizeof(unsigned char)))
status = E08;
} else if (regno >= EXS && regno <= SPC) { } else if (regno >= EXS && regno <= SPC) {
/* Consecutive 32-bit registers. */ /* Consecutive 32-bit registers. */
hex2mem((unsigned char *)&reg.exs + (regno - EXS) * sizeof(unsigned int), if (hex2bin((unsigned char *)&reg.exs + (regno - EXS) * sizeof(unsigned int),
val, sizeof(unsigned int)); val, sizeof(unsigned int)))
status = E08;
} else if (regno == PC) { } else if (regno == PC) {
/* Pseudo-register. Treat as read-only. */ /* Pseudo-register. Treat as read-only. */
...@@ -574,7 +572,9 @@ write_register(int regno, char *val) ...@@ -574,7 +572,9 @@ write_register(int regno, char *val)
} else if (regno >= S0 && regno <= S15) { } else if (regno >= S0 && regno <= S15) {
/* 32-bit registers. */ /* 32-bit registers. */
hex2mem((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int), val, sizeof(unsigned int)); if (hex2bin((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int),
val, sizeof(unsigned int)))
status = E08;
} else { } else {
/* Non-existing register. */ /* Non-existing register. */
status = E05; status = E05;
...@@ -630,19 +630,6 @@ read_register(char regno, unsigned int *valptr) ...@@ -630,19 +630,6 @@ read_register(char regno, unsigned int *valptr)
} }
/********************************** Packet I/O ******************************/ /********************************** Packet I/O ******************************/
/* Returns the integer equivalent of a hexadecimal character. */
static int
hex(char ch)
{
if ((ch >= 'a') && (ch <= 'f'))
return (ch - 'a' + 10);
if ((ch >= '0') && (ch <= '9'))
return (ch - '0');
if ((ch >= 'A') && (ch <= 'F'))
return (ch - 'A' + 10);
return -1;
}
/* Convert the memory, pointed to by mem into hexadecimal representation. /* Convert the memory, pointed to by mem into hexadecimal representation.
Put the result in buf, and return a pointer to the last character Put the result in buf, and return a pointer to the last character
in buf (null). */ in buf (null). */
...@@ -689,22 +676,6 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count) ...@@ -689,22 +676,6 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
return buf; return buf;
} }
/* Convert the array, in hexadecimal representation, pointed to by buf into
binary representation. Put the result in mem, and return a pointer to
the character after the last byte written. */
static unsigned char*
hex2mem(unsigned char *mem, char *buf, int count)
{
int i;
unsigned char ch;
for (i = 0; i < count; i++) {
ch = hex (*buf++) << 4;
ch = ch + hex (*buf++);
*mem++ = ch;
}
return mem;
}
/* Put the content of the array, in binary representation, pointed to by buf /* Put the content of the array, in binary representation, pointed to by buf
into memory pointed to by mem, and return a pointer to the character after into memory pointed to by mem, and return a pointer to the character after
the last byte written. the last byte written.
...@@ -763,8 +734,8 @@ getpacket(char *buffer) ...@@ -763,8 +734,8 @@ getpacket(char *buffer)
buffer[count] = 0; buffer[count] = 0;
if (ch == '#') { if (ch == '#') {
xmitcsum = hex(getDebugChar()) << 4; xmitcsum = hex_to_bin(getDebugChar()) << 4;
xmitcsum += hex(getDebugChar()); xmitcsum += hex_to_bin(getDebugChar());
if (checksum != xmitcsum) { if (checksum != xmitcsum) {
/* Wrong checksum */ /* Wrong checksum */
putDebugChar('-'); putDebugChar('-');
...@@ -1304,13 +1275,16 @@ handle_exception(int sigval) ...@@ -1304,13 +1275,16 @@ handle_exception(int sigval)
/* Write registers. GXX..XX /* Write registers. GXX..XX
Each byte of register data is described by two hex digits. Each byte of register data is described by two hex digits.
Success: OK Success: OK
Failure: void. */ Failure: E08. */
/* General and special registers. */ /* General and special registers. */
hex2mem((char *)&reg, &input_buffer[1], sizeof(registers)); if (hex2bin((char *)&reg, &input_buffer[1], sizeof(registers)))
gdb_cris_strcpy(output_buffer, error_message[E08]);
/* Support registers. */ /* Support registers. */
hex2mem((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), else if (hex2bin((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
&input_buffer[1] + sizeof(registers), &input_buffer[1] + sizeof(registers),
16 * sizeof(unsigned int)); 16 * sizeof(unsigned int)))
gdb_cris_strcpy(output_buffer, error_message[E08]);
else
gdb_cris_strcpy(output_buffer, "OK"); gdb_cris_strcpy(output_buffer, "OK");
break; break;
...@@ -1338,6 +1312,10 @@ handle_exception(int sigval) ...@@ -1338,6 +1312,10 @@ handle_exception(int sigval)
/* Do not support non-existing registers. */ /* Do not support non-existing registers. */
gdb_cris_strcpy(output_buffer, error_message[E05]); gdb_cris_strcpy(output_buffer, error_message[E05]);
break; break;
case E08:
/* Invalid parameter. */
gdb_cris_strcpy(output_buffer, error_message[E08]);
break;
default: default:
/* Valid register number. */ /* Valid register number. */
gdb_cris_strcpy(output_buffer, "OK"); gdb_cris_strcpy(output_buffer, "OK");
...@@ -1380,7 +1358,7 @@ handle_exception(int sigval) ...@@ -1380,7 +1358,7 @@ handle_exception(int sigval)
AA..AA is the start address, LLLL is the number of bytes, and AA..AA is the start address, LLLL is the number of bytes, and
XX..XX is the hexadecimal data. XX..XX is the hexadecimal data.
Success: OK Success: OK
Failure: void. */ Failure: E08. */
{ {
char *lenptr; char *lenptr;
char *dataptr; char *dataptr;
...@@ -1389,13 +1367,15 @@ handle_exception(int sigval) ...@@ -1389,13 +1367,15 @@ handle_exception(int sigval)
int len = gdb_cris_strtol(lenptr+1, &dataptr, 16); int len = gdb_cris_strtol(lenptr+1, &dataptr, 16);
if (*lenptr == ',' && *dataptr == ':') { if (*lenptr == ',' && *dataptr == ':') {
if (input_buffer[0] == 'M') { if (input_buffer[0] == 'M') {
hex2mem(addr, dataptr + 1, len); if (hex2bin(addr, dataptr + 1, len))
gdb_cris_strcpy(output_buffer, error_message[E08]);
else
gdb_cris_strcpy(output_buffer, "OK");
} else /* X */ { } else /* X */ {
bin2mem(addr, dataptr + 1, len); bin2mem(addr, dataptr + 1, len);
}
gdb_cris_strcpy(output_buffer, "OK"); gdb_cris_strcpy(output_buffer, "OK");
} }
else { } else {
gdb_cris_strcpy(output_buffer, error_message[E06]); gdb_cris_strcpy(output_buffer, error_message[E06]);
} }
} }
......
arch/cris/arch-v32/kernel/setup.c
View file @ 0921f1ef
...@@ -128,10 +128,6 @@ static struct i2c_board_info __initdata i2c_info[] = { ...@@ -128,10 +128,6 @@ static struct i2c_board_info __initdata i2c_info[] = {
{I2C_BOARD_INFO("tmp100", 0x4E)}, {I2C_BOARD_INFO("tmp100", 0x4E)},
#ifdef CONFIG_RTC_DRV_PCF8563 #ifdef CONFIG_RTC_DRV_PCF8563
{I2C_BOARD_INFO("pcf8563", 0x51)}, {I2C_BOARD_INFO("pcf8563", 0x51)},
#endif
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
{I2C_BOARD_INFO("vgpio", 0x20)},
{I2C_BOARD_INFO("vgpio", 0x21)},
#endif #endif
{I2C_BOARD_INFO("pca9536", 0x41)}, {I2C_BOARD_INFO("pca9536", 0x41)},
{I2C_BOARD_INFO("fnp300", 0x40)}, {I2C_BOARD_INFO("fnp300", 0x40)},
...@@ -146,10 +142,6 @@ static struct i2c_board_info __initdata i2c_info2[] = { ...@@ -146,10 +142,6 @@ static struct i2c_board_info __initdata i2c_info2[] = {
{I2C_BOARD_INFO("tmp100", 0x4C)}, {I2C_BOARD_INFO("tmp100", 0x4C)},
{I2C_BOARD_INFO("tmp100", 0x4D)}, {I2C_BOARD_INFO("tmp100", 0x4D)},
{I2C_BOARD_INFO("tmp100", 0x4E)}, {I2C_BOARD_INFO("tmp100", 0x4E)},
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
{I2C_BOARD_INFO("vgpio", 0x20)},
{I2C_BOARD_INFO("vgpio", 0x21)},
#endif
{I2C_BOARD_INFO("pca9536", 0x41)}, {I2C_BOARD_INFO("pca9536", 0x41)},
{I2C_BOARD_INFO("fnp300", 0x40)}, {I2C_BOARD_INFO("fnp300", 0x40)},
{I2C_BOARD_INFO("fnp300", 0x42)}, {I2C_BOARD_INFO("fnp300", 0x42)},
......
arch/cris/arch-v32/mach-a3/Makefile
View file @ 0921f1ef
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
# Makefile for the linux kernel. # Makefile for the linux kernel.
# #
obj-y := dma.o pinmux.o io.o arbiter.o obj-y := dma.o pinmux.o arbiter.o
clean: clean:
arch/cris/arch-v32/mach-a3/io.c deleted 100644 → 0
View file @ 15f93405
/*
* Helper functions for I/O pins.
*
* Copyright (c) 2005-2007 Axis Communications AB.
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/io.h>
#include <mach/pinmux.h>
#include <hwregs/gio_defs.h>
struct crisv32_ioport crisv32_ioports[] = {
{
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe),
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout),
(unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din),
32
},
{
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe),
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout),
(unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din),
32
},
{
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe),
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout),
(unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din),
16
},
};
#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
struct crisv32_iopin crisv32_led_net0_green;
struct crisv32_iopin crisv32_led_net0_red;
struct crisv32_iopin crisv32_led2_green;
struct crisv32_iopin crisv32_led2_red;
struct crisv32_iopin crisv32_led3_green;
struct crisv32_iopin crisv32_led3_red;
/* Dummy port used when green LED and red LED is on the same bit */
static unsigned long io_dummy;
static struct crisv32_ioport dummy_port = {
&io_dummy,
&io_dummy,
&io_dummy,
32
};
static struct crisv32_iopin dummy_led = {
&dummy_port,
0
};
static int __init crisv32_io_init(void)
{
int ret = 0;
u32 i;
/* Locks *should* be dynamically initialized. */
for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++)
spin_lock_init(&crisv32_ioports[i].lock);
spin_lock_init(&dummy_port.lock);
/* Initialize LEDs */
#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
ret += crisv32_io_get_name(&crisv32_led_net0_green,
CONFIG_ETRAX_LED_G_NET0);
crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out);
if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) {
ret += crisv32_io_get_name(&crisv32_led_net0_red,
CONFIG_ETRAX_LED_R_NET0);
crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out);
} else
crisv32_led_net0_red = dummy_led;
#endif
ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G);
ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R);
ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G);
ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R);
crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
return ret;
}
__initcall(crisv32_io_init);
int crisv32_io_get(struct crisv32_iopin *iopin,
unsigned int port, unsigned int pin)
{
if (port > NBR_OF_PORTS)
return -EINVAL;
if (port > crisv32_ioports[port].pin_count)
return -EINVAL;
iopin->bit = 1 << pin;
iopin->port = &crisv32_ioports[port];
if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
return -EIO;
return 0;
}
int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name)
{
int port;
int pin;
if (toupper(*name) == 'P')
name++;
if (toupper(*name) < 'A' || toupper(*name) > 'E')
return -EINVAL;
port = toupper(*name) - 'A';
name++;
pin = simple_strtoul(name, NULL, 10);
if (pin < 0 || pin > crisv32_ioports[port].pin_count)
return -EINVAL;
iopin->bit = 1 << pin;
iopin->port = &crisv32_ioports[port];
if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
return -EIO;
return 0;
}
#ifdef CONFIG_PCI
/* PCI I/O access stuff */
struct cris_io_operations *cris_iops = NULL;
EXPORT_SYMBOL(cris_iops);
#endif
arch/cris/arch-v32/mach-fs/Kconfig
View file @ 0921f1ef
...@@ -192,25 +192,6 @@ config ETRAX_DEF_GIO_PE_OUT ...@@ -192,25 +192,6 @@ config ETRAX_DEF_GIO_PE_OUT
Configures the initial data for the general port E bits. Most Configures the initial data for the general port E bits. Most
products should use 00000 here. products should use 00000 here.
config ETRAX_DEF_GIO_PV_OE
hex "GIO_PV_OE"
depends on ETRAX_VIRTUAL_GPIO
default "0000"
help
Configures the direction of virtual general port V bits. 1 is out,
0 is in. This is often totally different depending on the product
used. These bits are used for all kinds of stuff. If you don't know
what to use, it is always safe to put all as inputs, although
floating inputs isn't good.
config ETRAX_DEF_GIO_PV_OUT
hex "GIO_PV_OUT"
depends on ETRAX_VIRTUAL_GPIO
default "0000"
help
Configures the initial data for the virtual general port V bits.
Most products should use 0000 here.
endmenu endmenu
endif endif
arch/cris/arch-v32/mach-fs/Makefile
View file @ 0921f1ef
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
# Makefile for the linux kernel. # Makefile for the linux kernel.
# #
obj-y := dma.o pinmux.o io.o arbiter.o obj-y := dma.o pinmux.o arbiter.o
clean: clean:
arch/cris/arch-v32/mach-fs/io.c deleted 100644 → 0
View file @ 15f93405
/*
* Helper functions for I/O pins.
*
* Copyright (c) 2004-2007 Axis Communications AB.
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/io.h>
#include <mach/pinmux.h>
#include <hwregs/gio_defs.h>
#ifndef DEBUG
#define DEBUG(x)
#endif
struct crisv32_ioport crisv32_ioports[] = {
{
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe),
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout),
(unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din),
8
},
{
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe),
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout),
(unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din),
18
},
{
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe),
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout),
(unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din),
18
},
{
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_oe),
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_dout),
(unsigned long *)REG_ADDR(gio, regi_gio, r_pd_din),
18
},
{
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_oe),
(unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_dout),
(unsigned long *)REG_ADDR(gio, regi_gio, r_pe_din),
18
}
};
#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
struct crisv32_iopin crisv32_led_net0_green;
struct crisv32_iopin crisv32_led_net0_red;
struct crisv32_iopin crisv32_led_net1_green;
struct crisv32_iopin crisv32_led_net1_red;
struct crisv32_iopin crisv32_led2_green;
struct crisv32_iopin crisv32_led2_red;
struct crisv32_iopin crisv32_led3_green;
struct crisv32_iopin crisv32_led3_red;
/* Dummy port used when green LED and red LED is on the same bit */
static unsigned long io_dummy;
static struct crisv32_ioport dummy_port = {
&io_dummy,
&io_dummy,
&io_dummy,
18
};
static struct crisv32_iopin dummy_led = {
&dummy_port,
0
};
static int __init crisv32_io_init(void)
{
int ret = 0;
u32 i;
/* Locks *should* be dynamically initialized. */
for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++)
spin_lock_init(&crisv32_ioports[i].lock);
spin_lock_init(&dummy_port.lock);
/* Initialize LEDs */
#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
ret +=
crisv32_io_get_name(&crisv32_led_net0_green,
CONFIG_ETRAX_LED_G_NET0);
crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out);
if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) {
ret +=
crisv32_io_get_name(&crisv32_led_net0_red,
CONFIG_ETRAX_LED_R_NET0);
crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out);
} else
crisv32_led_net0_red = dummy_led;
#endif
#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO
ret +=
crisv32_io_get_name(&crisv32_led_net1_green,
CONFIG_ETRAX_LED_G_NET1);
crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out);
if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) {
crisv32_io_get_name(&crisv32_led_net1_red,
CONFIG_ETRAX_LED_R_NET1);
crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out);
} else
crisv32_led_net1_red = dummy_led;
#endif
ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G);
ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R);
ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G);
ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R);
crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
return ret;
}
__initcall(crisv32_io_init);
int crisv32_io_get(struct crisv32_iopin *iopin,
unsigned int port, unsigned int pin)
{
if (port > NBR_OF_PORTS)
return -EINVAL;
if (port > crisv32_ioports[port].pin_count)
return -EINVAL;
iopin->bit = 1 << pin;
iopin->port = &crisv32_ioports[port];
/* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
/* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio))
return -EIO;
DEBUG(printk(KERN_DEBUG "crisv32_io_get: Allocated pin %d on port %d\n",
pin, port));
return 0;
}
int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name)
{
int port;
int pin;
if (toupper(*name) == 'P')
name++;
if (toupper(*name) < 'A' || toupper(*name) > 'E')
return -EINVAL;
port = toupper(*name) - 'A';
name++;
pin = simple_strtoul(name, NULL, 10);
if (pin < 0 || pin > crisv32_ioports[port].pin_count)
return -EINVAL;
iopin->bit = 1 << pin;
iopin->port = &crisv32_ioports[port];
/* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
/* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio))
return -EIO;
DEBUG(printk(KERN_DEBUG
"crisv32_io_get_name: Allocated pin %d on port %d\n",
pin, port));
return 0;
}
#ifdef CONFIG_PCI
/* PCI I/O access stuff */
struct cris_io_operations *cris_iops = NULL;
EXPORT_SYMBOL(cris_iops);
#endif
arch/cris/boot/dts/artpec3.dtsi 0 → 100644
View file @ 0921f1ef
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "axis,crisv32";
reg = <0>;
};
};
soc {
compatible = "simple-bus";
model = "artpec3";
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller {
compatible = "axis,crisv32-intc";
reg = <0xb002a000 0x1000>;
interrupt-controller;
#interrupt-cells = <1>;
};
gio: gpio@b0020000 {
compatible = "axis,artpec3-gio";
reg = <0xb0020000 0x1000>;
interrupts = <61>;
gpio-controller;
#gpio-cells = <3>;
};
serial@b003e000 {
compatible = "axis,etraxfs-uart";
reg = <0xb003e000 0x1000>;
interrupts = <64>;
status = "disabled";
};
};
};
arch/cris/boot/dts/dev88.dts
View file @ 0921f1ef
/dts-v1/; /dts-v1/;
#include <dt-bindings/gpio/gpio.h>
/include/ "etraxfs.dtsi" /include/ "etraxfs.dtsi"
/ { / {
...@@ -15,4 +17,51 @@ uart0: serial@b00260000 { ...@@ -15,4 +17,51 @@ uart0: serial@b00260000 {
status = "okay"; status = "okay";
}; };
}; };
spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpio-sck = <&gio 1 0 0xd>;
gpio-miso = <&gio 4 0 0xd>;
gpio-mosi = <&gio 0 0 0xd>;
cs-gpios = <&gio 3 0 0xd>;
num-chipselects = <1>;
temp-sensor@0 {
compatible = "ti,lm70";
reg = <0>;
spi-max-frequency = <100000>;
};
};
i2c {
compatible = "i2c-gpio";
gpios = <&gio 5 0 0xd>, <&gio 6 0 0xd>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
leds {
compatible = "gpio-leds";
network {
label = "network";
gpios = <&gio 2 GPIO_ACTIVE_LOW 0xa>;
};
status {
label = "status";
gpios = <&gio 3 GPIO_ACTIVE_LOW 0xa>;
linux,default-trigger = "heartbeat";
};
};
}; };
arch/cris/boot/dts/etraxfs.dtsi
View file @ 0921f1ef
...@@ -28,6 +28,14 @@ intc: interrupt-controller { ...@@ -28,6 +28,14 @@ intc: interrupt-controller {
#interrupt-cells = <1>; #interrupt-cells = <1>;
}; };
gio: gpio@b001a000 {
compatible = "axis,etraxfs-gio";
reg = <0xb001a000 0x1000>;
interrupts = <50>;
gpio-controller;
#gpio-cells = <3>;
};
serial@b00260000 { serial@b00260000 {
compatible = "axis,etraxfs-uart"; compatible = "axis,etraxfs-uart";
reg = <0xb0026000 0x1000>; reg = <0xb0026000 0x1000>;
......
arch/cris/boot/dts/include/dt-bindings 0 → 120000
View file @ 0921f1ef
../../../../../include/dt-bindings
\ No newline at end of file
arch/cris/boot/dts/p1343.dts 0 → 100644
View file @ 0921f1ef
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/include/ "artpec3.dtsi"
/ {
model = "Axis P1343 Network Camera";
compatible = "axis,p1343";
aliases {
serial0 = &uart0;
};
soc {
uart0: serial@b003e000 {
status = "okay";
};
};
i2c {
compatible = "i2c-gpio";
gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
leds {
compatible = "gpio-leds";
status_green {
label = "status:green";
gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>;
linux,default-trigger = "heartbeat";
};
status_red {
label = "status:red";
gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>;
};
network_green {
label = "network:green";
gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>;
};
network_red {
label = "network:red";
gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>;
};
power_red {
label = "power:red";
gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
activity-button@0 {
label = "Activity Button";
linux,code = <KEY_FN>;
gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>;
};
};
};
arch/cris/boot/rescue/head_v10.S
View file @ 0921f1ef
...@@ -281,9 +281,6 @@ wait_ser: ...@@ -281,9 +281,6 @@ wait_ser:
#ifdef CONFIG_ETRAX_PB_LEDS #ifdef CONFIG_ETRAX_PB_LEDS
move.b $r2, [R_PORT_PB_DATA] move.b $r2, [R_PORT_PB_DATA]
#endif #endif
#ifdef CONFIG_ETRAX_90000000_LEDS
move.b $r2, [0x90000000]
#endif
#endif #endif
;; check if we got something on the serial port ;; check if we got something on the serial port
......
arch/cris/include/arch-v32/arch/io.h deleted 100644 → 0
View file @ 15f93405
#ifndef _ASM_ARCH_CRIS_IO_H
#define _ASM_ARCH_CRIS_IO_H
#include <linux/spinlock.h>
#include <hwregs/reg_map.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/gio_defs.h>
enum crisv32_io_dir
{
crisv32_io_dir_in = 0,
crisv32_io_dir_out = 1
};
struct crisv32_ioport
{
volatile unsigned long *oe;
volatile unsigned long *data;
volatile unsigned long *data_in;
unsigned int pin_count;
spinlock_t lock;
};
struct crisv32_iopin
{
struct crisv32_ioport* port;
int bit;
};
extern struct crisv32_ioport crisv32_ioports[];
extern struct crisv32_iopin crisv32_led1_green;
extern struct crisv32_iopin crisv32_led1_red;
extern struct crisv32_iopin crisv32_led2_green;
extern struct crisv32_iopin crisv32_led2_red;
extern struct crisv32_iopin crisv32_led3_green;
extern struct crisv32_iopin crisv32_led3_red;
extern struct crisv32_iopin crisv32_led_net0_green;
extern struct crisv32_iopin crisv32_led_net0_red;
extern struct crisv32_iopin crisv32_led_net1_green;
extern struct crisv32_iopin crisv32_led_net1_red;
static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val)
{
unsigned long flags;
spin_lock_irqsave(&iopin->port->lock, flags);
if (iopin->port->data) {
if (val)
*iopin->port->data |= iopin->bit;
else
*iopin->port->data &= ~iopin->bit;
}
spin_unlock_irqrestore(&iopin->port->lock, flags);
}
static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin,
enum crisv32_io_dir dir)
{
unsigned long flags;
spin_lock_irqsave(&iopin->port->lock, flags);
if (iopin->port->oe) {
if (dir == crisv32_io_dir_in)
*iopin->port->oe &= ~iopin->bit;
else
*iopin->port->oe |= iopin->bit;
}
spin_unlock_irqrestore(&iopin->port->lock, flags);
}
static inline int crisv32_io_rd(struct crisv32_iopin* iopin)
{
return ((*iopin->port->data_in & iopin->bit) ? 1 : 0);
}
int crisv32_io_get(struct crisv32_iopin* iopin,
unsigned int port, unsigned int pin);
int crisv32_io_get_name(struct crisv32_iopin* iopin,
const char *name);
#define CRIS_LED_OFF 0x00
#define CRIS_LED_GREEN 0x01
#define CRIS_LED_RED 0x02
#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED)
#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
#define CRIS_LED_NETWORK_GRP0_SET(x) \
do { \
CRIS_LED_NETWORK_GRP0_SET_G((x) & CRIS_LED_GREEN); \
CRIS_LED_NETWORK_GRP0_SET_R((x) & CRIS_LED_RED); \
} while (0)
#else
#define CRIS_LED_NETWORK_GRP0_SET(x) while (0) {}
#endif
#define CRIS_LED_NETWORK_GRP0_SET_G(x) \
crisv32_io_set(&crisv32_led_net0_green, !(x));
#define CRIS_LED_NETWORK_GRP0_SET_R(x) \
crisv32_io_set(&crisv32_led_net0_red, !(x));
#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)
#define CRIS_LED_NETWORK_GRP1_SET(x) \
do { \
CRIS_LED_NETWORK_GRP1_SET_G((x) & CRIS_LED_GREEN); \
CRIS_LED_NETWORK_GRP1_SET_R((x) & CRIS_LED_RED); \
} while (0)
#else
#define CRIS_LED_NETWORK_GRP1_SET(x) while (0) {}
#endif
#define CRIS_LED_NETWORK_GRP1_SET_G(x) \
crisv32_io_set(&crisv32_led_net1_green, !(x));
#define CRIS_LED_NETWORK_GRP1_SET_R(x) \
crisv32_io_set(&crisv32_led_net1_red, !(x));
#define CRIS_LED_ACTIVE_SET(x) \
do { \
CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \
CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \
} while (0)
#define CRIS_LED_ACTIVE_SET_G(x) \
crisv32_io_set(&crisv32_led2_green, !(x));
#define CRIS_LED_ACTIVE_SET_R(x) \
crisv32_io_set(&crisv32_led2_red, !(x));
#define CRIS_LED_DISK_WRITE(x) \
do{\
crisv32_io_set(&crisv32_led3_green, !(x)); \
crisv32_io_set(&crisv32_led3_red, !(x)); \
}while(0)
#define CRIS_LED_DISK_READ(x) \
crisv32_io_set(&crisv32_led3_green, !(x));
#endif
arch/cris/include/arch-v32/arch/irq.h
View file @ 0921f1ef
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
#include <hwregs/intr_vect.h> #include <hwregs/intr_vect.h>
/* Number of non-cpu interrupts. */ /* Number of non-cpu interrupts. */
#define NR_IRQS NBR_INTR_VECT /* Exceptions + IRQs */ #define NR_IRQS (NBR_INTR_VECT + 256) /* Exceptions + IRQs */
#define FIRST_IRQ 0x31 /* Exception number for first IRQ */ #define FIRST_IRQ 0x31 /* Exception number for first IRQ */
#define NR_REAL_IRQS (NBR_INTR_VECT - FIRST_IRQ) /* IRQs */ #define NR_REAL_IRQS (NBR_INTR_VECT - FIRST_IRQ) /* IRQs */
#if NR_REAL_IRQS > 32 #if NR_REAL_IRQS > 32
......
arch/cris/include/asm/eshlibld.h
View file @ 0921f1ef
...@@ -45,8 +45,7 @@ ...@@ -45,8 +45,7 @@
assumed that we want to share code when debugging (exposes more assumed that we want to share code when debugging (exposes more
trouble). */ trouble). */
#ifndef SHARE_LIB_CORE #ifndef SHARE_LIB_CORE
# if (defined(__KERNEL__) || !defined(RELOC_DEBUG)) \ # if (defined(__KERNEL__) || !defined(RELOC_DEBUG))
&& !defined(CONFIG_SHARE_SHLIB_CORE)
# define SHARE_LIB_CORE 0 # define SHARE_LIB_CORE 0
# else # else
# define SHARE_LIB_CORE 1 # define SHARE_LIB_CORE 1
......
arch/cris/include/asm/io.h
View file @ 0921f1ef
...@@ -2,7 +2,9 @@ ...@@ -2,7 +2,9 @@
#define _ASM_CRIS_IO_H #define _ASM_CRIS_IO_H
#include <asm/page.h> /* for __va, __pa */ #include <asm/page.h> /* for __va, __pa */
#ifdef CONFIG_ETRAX_ARCH_V10
#include <arch/io.h> #include <arch/io.h>
#endif
#include <asm-generic/iomap.h> #include <asm-generic/iomap.h>
#include <linux/kernel.h> #include <linux/kernel.h>
......
arch/cris/include/uapi/asm/etraxgpio.h
View file @ 0921f1ef
...@@ -11,26 +11,6 @@ ...@@ -11,26 +11,6 @@
* g1-g7 and g25-g31 is both input and outputs but on different pins * g1-g7 and g25-g31 is both input and outputs but on different pins
* Also note that some bits change pins depending on what interfaces * Also note that some bits change pins depending on what interfaces
* are enabled. * are enabled.
*
* For ETRAX FS (CONFIG_ETRAXFS):
* /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction
* /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction
* /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction
* /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction
* /dev/gpioe minor 5, 18 bit GPIO, each bit can change direction
* /dev/leds minor 2, Access to leds depending on kernelconfig
*
* For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3):
* /dev/gpioa minor 0, 32 bit GPIO, each bit can change direction
* /dev/gpiob minor 1, 32 bit GPIO, each bit can change direction
* /dev/gpioc minor 3, 16 bit GPIO, each bit can change direction
* /dev/gpiod minor 4, 32 bit GPIO, input only
* /dev/leds minor 2, Access to leds depending on kernelconfig
* /dev/pwm0 minor 16, PWM channel 0 on PA30
* /dev/pwm1 minor 17, PWM channel 1 on PA31
* /dev/pwm2 minor 18, PWM channel 2 on PB26
* /dev/ppwm minor 19, PPWM channel
*
*/ */
#ifndef _ASM_ETRAXGPIO_H #ifndef _ASM_ETRAXGPIO_H
#define _ASM_ETRAXGPIO_H #define _ASM_ETRAXGPIO_H
...@@ -40,52 +20,12 @@ ...@@ -40,52 +20,12 @@
#define ETRAXGPIO_IOCTYPE 43 #define ETRAXGPIO_IOCTYPE 43
/* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */ /* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */
#ifdef CONFIG_ETRAX_ARCH_V10
#define GPIO_MINOR_A 0 #define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1 #define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2 #define GPIO_MINOR_LEDS 2
#define GPIO_MINOR_G 3 #define GPIO_MINOR_G 3
#define GPIO_MINOR_LAST 3 #define GPIO_MINOR_LAST 3
#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST #define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
#endif
#ifdef CONFIG_ETRAXFS
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
#define GPIO_MINOR_C 3
#define GPIO_MINOR_D 4
#define GPIO_MINOR_E 5
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
#define GPIO_MINOR_V 6
#define GPIO_MINOR_LAST 6
#else
#define GPIO_MINOR_LAST 5
#endif
#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
#endif
#ifdef CONFIG_CRIS_MACH_ARTPEC3
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
#define GPIO_MINOR_C 3
#define GPIO_MINOR_D 4
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
#define GPIO_MINOR_V 6
#define GPIO_MINOR_LAST 6
#else
#define GPIO_MINOR_LAST 4
#endif
#define GPIO_MINOR_FIRST_PWM 16
#define GPIO_MINOR_PWM0 (GPIO_MINOR_FIRST_PWM+0)
#define GPIO_MINOR_PWM1 (GPIO_MINOR_FIRST_PWM+1)
#define GPIO_MINOR_PWM2 (GPIO_MINOR_FIRST_PWM+2)
#define GPIO_MINOR_PPWM (GPIO_MINOR_FIRST_PWM+3)
#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PPWM
#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST_PWM
#endif
/* supported ioctl _IOC_NR's */ /* supported ioctl _IOC_NR's */
...@@ -139,101 +79,4 @@ ...@@ -139,101 +79,4 @@
#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */ #define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */
/* *arg updated with current output pins. */ /* *arg updated with current output pins. */
/* The following ioctl's are applicable to the PWM channels only */
#define IO_PWM_SET_MODE 0x20
enum io_pwm_mode {
PWM_OFF = 0, /* disabled, deallocated */
PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */
PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */
PWM_VARFREQ = 3, /* individually configurable high/low periods */
PWM_SOFT = 4 /* software generated */
};
struct io_pwm_set_mode {
enum io_pwm_mode mode;
};
/* Only for mode PWM_VARFREQ. Period lo/high set in increments of 10ns
* from 10ns (value = 0) to 81920ns (value = 8191)
* (Resulting frequencies range from 50 MHz (10ns + 10ns) down to
* 6.1 kHz (81920ns + 81920ns) at 50% duty cycle, to 12.2 kHz at min/max duty
* cycle (81920 + 10ns or 10ns + 81920ns, respectively).)
*/
#define IO_PWM_SET_PERIOD 0x21
struct io_pwm_set_period {
unsigned int lo; /* 0..8191 */
unsigned int hi; /* 0..8191 */
};
/* Only for modes PWM_STANDARD and PWM_FAST.
* For PWM_STANDARD, set duty cycle of 390 kHz PWM output signal, from
* 0 (value = 0) to 255/256 (value = 255).
* For PWM_FAST, set duty cycle of PWM output signal from
* 0% (value = 0) to 100% (value = 255). Output signal in this mode
* is a 10ns pulse surrounded by a high or low level depending on duty
* cycle (except for 0% and 100% which result in a constant output).
* Resulting output frequency varies from 50 MHz at 50% duty cycle,
* down to 390 kHz at min/max duty cycle.
*/
#define IO_PWM_SET_DUTY 0x22
struct io_pwm_set_duty {
int duty; /* 0..255 */
};
/* Returns information about the latest PWM pulse.
* lo: Length of the latest low period, in units of 10ns.
* hi: Length of the latest high period, in units of 10ns.
* cnt: Time since last detected edge, in units of 10ns.
*
* The input source to PWM is decied by IO_PWM_SET_INPUT_SRC.
*
* NOTE: All PWM devices is connected to the same input source.
*/
#define IO_PWM_GET_PERIOD 0x23
struct io_pwm_get_period {
unsigned int lo;
unsigned int hi;
unsigned int cnt;
};
/* Sets the input source for the PWM input. For the src value see the
* register description for gio:rw_pwm_in_cfg.
*
* NOTE: All PWM devices is connected to the same input source.
*/
#define IO_PWM_SET_INPUT_SRC 0x24
struct io_pwm_set_input_src {
unsigned int src; /* 0..7 */
};
/* Sets the duty cycles in steps of 1/256, 0 = 0%, 255 = 100% duty cycle */
#define IO_PPWM_SET_DUTY 0x25
struct io_ppwm_set_duty {
int duty; /* 0..255 */
};
/* Configuraton struct for the IO_PWMCLK_SET_CONFIG ioctl to configure
* PWM capable gpio pins:
*/
#define IO_PWMCLK_SETGET_CONFIG 0x26
struct gpio_pwmclk_conf {
unsigned int gpiopin; /* The pin number based on the opened device */
unsigned int baseclk; /* The base clock to use, or sw will select one close*/
unsigned int low; /* The number of low periods of the baseclk */
unsigned int high; /* The number of high periods of the baseclk */
};
/* Examples:
* To get a symmetric 12 MHz clock without knowing anything about the hardware:
* baseclk = 12000000, low = 0, high = 0
* To just get info of current setting:
* baseclk = 0, low = 0, high = 0, the values will be updated by driver.
*/
#endif #endif
arch/cris/kernel/crisksyms.c
View file @ 0921f1ef
...@@ -18,7 +18,6 @@ ...@@ -18,7 +18,6 @@
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/fasttimer.h> #include <asm/fasttimer.h>
extern unsigned long get_cmos_time(void);
extern void __Udiv(void); extern void __Udiv(void);
extern void __Umod(void); extern void __Umod(void);
extern void __Div(void); extern void __Div(void);
...@@ -30,7 +29,6 @@ extern void __negdi2(void); ...@@ -30,7 +29,6 @@ extern void __negdi2(void);
extern void iounmap(volatile void * __iomem); extern void iounmap(volatile void * __iomem);
/* Platform dependent support */ /* Platform dependent support */
EXPORT_SYMBOL(get_cmos_time);
EXPORT_SYMBOL(loops_per_usec); EXPORT_SYMBOL(loops_per_usec);
/* Math functions */ /* Math functions */
......
arch/cris/kernel/time.c
View file @ 0921f1ef
...@@ -39,31 +39,6 @@ ...@@ -39,31 +39,6 @@
extern unsigned long loops_per_jiffy; /* init/main.c */ extern unsigned long loops_per_jiffy; /* init/main.c */
unsigned long loops_per_usec; unsigned long loops_per_usec;
int set_rtc_mmss(unsigned long nowtime)
{
D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime));
return 0;
}
/* grab the time from the RTC chip */
unsigned long get_cmos_time(void)
{
return 0;
}
int update_persistent_clock(struct timespec now)
{
return set_rtc_mmss(now.tv_sec);
}
void read_persistent_clock(struct timespec *ts)
{
ts->tv_sec = 0;
ts->tv_nsec = 0;
}
extern void cris_profile_sample(struct pt_regs* regs); extern void cris_profile_sample(struct pt_regs* regs);
void void
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7