Merge http://linux-isdn.bkbits.net/linux-2.5.make

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

Documentation/filesystems/ntfs.txt

@@ -73,52 +73,27 @@ sloppy=<BOOL>		If sloppy is specified, ignore unknown mount options.
 			Otherwise the default behaviour is to abort mount if
 			any unknown options are found.
 
-posix=<bool>		Deprecated option. Still supported but please use
-			show_inodes=posix in the future. See description for
-			show_inodes=opt.
-
-show_sys_files=<bool>	Deprecated option. Still supported but please use
-			show_inodes=system in the future. See description for
-			show_inodes=opt.
-
-show_inodes=opt		Allows choice of which types of inode names readdir()
-			returns, i.e. this affects what "ls" shows. Following
-			values can be used for "opt":
-			   system: show system files
-			   win32:  long file names (includes POSIX) [DEFAULT]
-			   long:   same as win32
-			   dos:    short file names only (excludes POSIX)
-			   short:  same as dos
-			   posix:  same as both win32 and dos
-			   all:    all file names
-			Note that the options are additive, i.e. specifying:
-			   show_inodes=system,show_inodes=win32,show_inodes=dos
-			is the same as specifying:
-			   show_inodes=all
-			Note that the "posix" and "all" options will show all
-			directory names, BUT the link count on each directory
-			inode entry is set to 1, due to Linux not supporting
-			directory hard links. This may well confuse some
-			user space applications, since the directory names will
-			have the same inode numbers. Thus it is NOT advisable
-			to use the "posix" and "all" options. We provide them
-			only for completeness sake.
-			Further, note that the "system" option will not show
-			"$MFT" due to bugs/mis-features in glibc. Even though
-			it does not show, you can specifically "ls" it:
-				ls -l \$MFT
-			And of course you can stat it, too.
-			Further, note that irrespective of what show_inodes
-			option(s) you use, all files are accessible when you
-			specify the correct name, even though they may not be
-			shown in a normal "ls", i.e. you can always access the
-			system files and both the short and long file names of
-			files and directories.
-			Finally, note that win32 and dos file names are not
-			case sensitive and can be accessed using any
-			combination of lower and upper case, while POSIX file
-			names are case sensitive and they can only be accessed
-			given the correct case.
+show_sys_files=<BOOL>	If show_sys_files is specified, show the system files
+			in directory listings. Otherwise the default behaviour
+			is to hide the system files.
+			Note that even when show_sys_files is specified, "$MFT"
+			will not be visible due to bugs/mis-features in glibc.
+			Further, note that irrespective of show_sys_files, all
+			files are accessible by name, i.e. you can always do
+			"ls -l \$UpCase" for example to specifically show the
+			system file containing the Unicode upcase table.
+
+case_sensitive=<BOOL>	If case_sensitive is specified, treat all file names as
+			case sensitive and create file names in the POSIX
+			namespace. Otherwise the default behaviour is to treat
+			file names as case insensitive and to create file names
+			in the WIN32/LONG name space. Note, the Linux NTFS
+			driver will never create short file names and will
+			remove them on rename/delete of the corresponding long
+			file name.
+			Note that files remain accessible via their short file
+			name, if it exists. If case_sensitive, you will need to
+			provide the correct case of the short file name.
 
 errors=opt		What to do when critical file system errors are found.
 			Following values can be used for "opt":
@@ -174,12 +149,22 @@ Features
   (from 9:43 minutes on average down to 7:53). The time spent in user space
   was unchanged but the time spent in the kernel was decreased by a factor of
   2.5 (from 85 CPU seconds down to 33).
+- The driver does not support short file names in general. For backwards
+  compatibility, we implement access to files using their short file names if
+  they exist. The driver will not create short file names however, and a rename
+  will discard any existing short file name.
 
 
 Known bugs and (mis-)features
 =============================
 
-- None
+- The link count on each directory inode entry is set to 1, due to Linux not
+  supporting directory hard links. This may well confuse some user space
+  applications, since the directory names will have the same inode numbers.
+  This also speeds up ntfs_read_inode() immensely. And we haven't found any
+  problems with this approach so far. If you find a problem with this, please
+  let us know.
+
 
 Please send bug reports/comments/feedback/abuse to the Linux-NTFS development
 list at sourceforge: linux-ntfs-dev@lists.sourceforge.net
@@ -260,8 +245,20 @@ number of sectors BEFORE attempting to use it. You have been warned!
 ChangeLog
 =========
 
-Note that a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
-
+Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
+
+2.0.8:
+	- Remove now obsolete show_inodes and posix mount option(s).
+	- Restore show_sys_files mount option.
+	- Add new mount option case_sensitive, to determine if the driver
+	  treats file names as case sensitive or not.
+	- Mostly drop support for short file names (for backwards compatibility
+	  we only support accessing files via their short file name if one
+	  exists).
+	- Fix dcache aliasing issues wrt short/long file names.
+	- Cleanups and minor fixes.
+2.0.7:
+	- Just cleanups.
 2.0.6:
 	- Major bugfix to make compatible with other kernel changes. This fixes
 	  the hangs/oopses on umount.

arch/i386/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS := head.o init_task.o
+EXTRA_TARGETS := first_rule kernel.o head.o init_task.o
 
 O_TARGET := kernel.o
 
@@ -14,6 +14,7 @@ obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 		bootflag.o
 
 obj-$(CONFIG_MCA)		+= mca.o
+obj-$(CONFIG_EISA)		+= eisa.o
 obj-$(CONFIG_MTRR)		+= mtrr.o
 obj-$(CONFIG_X86_MSR)		+= msr.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
@@ -33,4 +34,8 @@ endif
 
 EXTRA_AFLAGS   := -traditional
 
+kernel-subdir-y                 := cpu
+subdir-y                        := $(kernel-subdir-y)
+obj-y   +=      $(foreach dir,$(kernel-subdir-y),$(dir)/$(dir).o)
+
 include $(TOPDIR)/Rules.make

arch/i386/kernel/cpu/Makefile

+O_TARGET	:= cpu.o
+
+obj-y	+=	amd.o
+obj-y	+=	cyrix.o
+obj-y	+=	centaur.o
+obj-y	+=	transmeta.o
+obj-y	+=	intel.o
+obj-y	+=	rise.o
+obj-y	+=	nexgen.o
+obj-y	+=	umc.o
+
+obj-y	+=	common.o
+obj-y	+=	proc.o
+
+include $(TOPDIR)/Rules.make

arch/i386/kernel/cpu/amd.c

+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ *	B step AMD K6 before B 9730xxxx have hardware bugs that can cause
+ *	misexecution of code under Linux. Owners of such processors should
+ *	contact AMD for precise details and a CPU swap.
+ *
+ *	See	http://www.multimania.com/poulot/k6bug.html
+ *		http://www.amd.com/K6/k6docs/revgd.html
+ *
+ *	The following test is erm.. interesting. AMD neglected to up
+ *	the chip setting when fixing the bug but they also tweaked some
+ *	performance at the same time..
+ */
+ 
+extern void vide(void);
+__asm__(".align 4\nvide: ret");
+
+static void __init init_amd(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int mbytes = max_mapnr >> (20-PAGE_SHIFT);
+	int r;
+
+	/*
+	 *	FIXME: We should handle the K5 here. Set up the write
+	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
+	 *	no bus pipeline)
+	 */
+
+	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+	clear_bit(0*32+31, c->x86_capability);
+	
+	r = get_model_name(c);
+
+	switch(c->x86)
+	{
+		case 5:
+			if( c->x86_model < 6 )
+			{
+				/* Based on AMD doc 20734R - June 2000 */
+				if ( c->x86_model == 0 ) {
+					clear_bit(X86_FEATURE_APIC, c->x86_capability);
+					set_bit(X86_FEATURE_PGE, c->x86_capability);
+				}
+				break;
+			}
+			
+			if ( c->x86_model == 6 && c->x86_mask == 1 ) {
+				const int K6_BUG_LOOP = 1000000;
+				int n;
+				void (*f_vide)(void);
+				unsigned long d, d2;
+				
+				printk(KERN_INFO "AMD K6 stepping B detected - ");
+				
+				/*
+				 * It looks like AMD fixed the 2.6.2 bug and improved indirect 
+				 * calls at the same time.
+				 */
+
+				n = K6_BUG_LOOP;
+				f_vide = vide;
+				rdtscl(d);
+				while (n--) 
+					f_vide();
+				rdtscl(d2);
+				d = d2-d;
+				
+				/* Knock these two lines out if it debugs out ok */
+				printk(KERN_INFO "K6 BUG %ld %d (Report these if test report is incorrect)\n", d, 20*K6_BUG_LOOP);
+				printk(KERN_INFO "AMD K6 stepping B detected - ");
+				/* -- cut here -- */
+				if (d > 20*K6_BUG_LOOP) 
+					printk("system stability may be impaired when more than 32 MB are used.\n");
+				else 
+					printk("probably OK (after B9730xxxx).\n");
+				printk(KERN_INFO "Please see http://www.mygale.com/~poulot/k6bug.html\n");
+			}
+
+			/* K6 with old style WHCR */
+			if (c->x86_model < 8 ||
+			   (c->x86_model== 8 && c->x86_mask < 8)) {
+				/* We can only write allocate on the low 508Mb */
+				if(mbytes>508)
+					mbytes=508;
+
+				rdmsr(MSR_K6_WHCR, l, h);
+				if ((l&0x0000FFFF)==0) {
+					unsigned long flags;
+					l=(1<<0)|((mbytes/4)<<1);
+					local_irq_save(flags);
+					wbinvd();
+					wrmsr(MSR_K6_WHCR, l, h);
+					local_irq_restore(flags);
+					printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+						mbytes);
+				}
+				break;
+			}
+
+			if ((c->x86_model == 8 && c->x86_mask >7) ||
+			     c->x86_model == 9 || c->x86_model == 13) {
+				/* The more serious chips .. */
+
+				if(mbytes>4092)
+					mbytes=4092;
+
+				rdmsr(MSR_K6_WHCR, l, h);
+				if ((l&0xFFFF0000)==0) {
+					unsigned long flags;
+					l=((mbytes>>2)<<22)|(1<<16);
+					local_irq_save(flags);
+					wbinvd();
+					wrmsr(MSR_K6_WHCR, l, h);
+					local_irq_restore(flags);
+					printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+						mbytes);
+				}
+
+				/*  Set MTRR capability flag if appropriate */
+				if (c->x86_model == 13 || c->x86_model == 9 ||
+				   (c->x86_model == 8 && c->x86_mask >= 8))
+					set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
+				break;
+			}
+			break;
+
+		case 6: /* An Athlon/Duron */
+ 
+			/* Bit 15 of Athlon specific MSR 15, needs to be 0
+ 			 * to enable SSE on Palomino/Morgan CPU's.
+			 * If the BIOS didn't enable it already, enable it
+			 * here.
+			 */
+			if (c->x86_model == 6 || c->x86_model == 7) {
+				if (!test_bit(X86_FEATURE_XMM, c->x86_capability)) {
+					printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+					rdmsr(MSR_K7_HWCR, l, h);
+					l &= ~0x00008000;
+					wrmsr(MSR_K7_HWCR, l, h);
+					set_bit(X86_FEATURE_XMM, c->x86_capability);
+				}
+			}
+			break;
+
+	}
+
+	display_cacheinfo(c);
+//	return r;
+}
+
+static void amd_identify(struct cpuinfo_x86 * c)
+{
+	u32 xlvl;
+
+	if (have_cpuid_p()) {
+		generic_identify(c);
+
+		/* AMD-defined flags: level 0x80000001 */
+		xlvl = cpuid_eax(0x80000000);
+		if ( (xlvl & 0xffff0000) == 0x80000000 ) {
+			if ( xlvl >= 0x80000001 )
+				c->x86_capability[1] = cpuid_edx(0x80000001);
+			if ( xlvl >= 0x80000004 )
+				get_model_name(c); /* Default name */
+		}
+	}
+}
+
+static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+	/* AMD errata T13 (order #21922) */
+	if ((c->x86 == 6)) {
+		if (c->x86_model == 3 && c->x86_mask == 0)	/* Duron Rev A0 */
+			size = 64;
+		if (c->x86_model == 4 &&
+		    (c->x86_mask==0 || c->x86_mask==1))	/* Tbird rev A1/A2 */
+			size = 256;
+	}
+	return size;
+}
+
+static struct cpu_dev amd_cpu_dev __initdata = {
+	c_vendor:	"AMD",
+	c_ident: 	{ "AuthenticAMD" },
+	c_models: {
+		{ X86_VENDOR_AMD,	4,
+		  {
+			  [3] "486 DX/2",
+			  [7] "486 DX/2-WB",
+			  [8] "486 DX/4", 
+			  [9] "486 DX/4-WB", 
+			  [14] "Am5x86-WT",
+			  [15] "Am5x86-WB" 
+		  }
+		},
+	},
+	c_init:		init_amd,
+	c_identify:	amd_identify,
+	c_size_cache:	amd_size_cache,
+};
+
+int __init amd_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(amd_init_cpu);

arch/i386/kernel/cpu/centaur.c

+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "cpu.h"
+
+#ifdef CONFIG_X86_OOSTORE
+
+static u32 __init power2(u32 x)
+{
+	u32 s=1;
+	while(s<=x)
+		s<<=1;
+	return s>>=1;
+}
+
+
+/*
+ *	Set up an actual MCR
+ */
+ 
+static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key)
+{
+	u32 lo, hi;
+	
+	hi = base & ~0xFFF;
+	lo = ~(size-1);		/* Size is a power of 2 so this makes a mask */
+	lo &= ~0xFFF;		/* Remove the ctrl value bits */
+	lo |= key;		/* Attribute we wish to set */
+	wrmsr(reg+MSR_IDT_MCR0, lo, hi);
+	mtrr_centaur_report_mcr(reg, lo, hi);	/* Tell the mtrr driver */
+}
+
+/*
+ *	Figure what we can cover with MCR's
+ *
+ *	Shortcut: We know you can't put 4Gig of RAM on a winchip
+ */
+
+static u32 __init ramtop(void)		/* 16388 */
+{
+	int i;
+	u32 top = 0;
+	u32 clip = 0xFFFFFFFFUL;
+	
+	for (i = 0; i < e820.nr_map; i++) {
+		unsigned long start, end;
+
+		if (e820.map[i].addr > 0xFFFFFFFFUL)
+			continue;
+		/*
+		 *	Don't MCR over reserved space. Ignore the ISA hole
+		 *	we frob around that catastrophy already
+		 */
+		 			
+		if (e820.map[i].type == E820_RESERVED)
+		{
+			if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+				clip = e820.map[i].addr;
+			continue;
+		}
+		start = e820.map[i].addr;
+		end = e820.map[i].addr + e820.map[i].size;
+		if (start >= end)
+			continue;
+		if (end > top)
+			top = end;
+	}
+	/* Everything below 'top' should be RAM except for the ISA hole.
+	   Because of the limited MCR's we want to map NV/ACPI into our
+	   MCR range for gunk in RAM 
+	   
+	   Clip might cause us to MCR insufficient RAM but that is an
+	   acceptable failure mode and should only bite obscure boxes with
+	   a VESA hole at 15Mb
+	   
+	   The second case Clip sometimes kicks in is when the EBDA is marked
+	   as reserved. Again we fail safe with reasonable results
+	*/
+	
+	if(top>clip)
+		top=clip;
+		
+	return top;
+}
+
+/*
+ *	Compute a set of MCR's to give maximum coverage
+ */
+
+static int __init centaur_mcr_compute(int nr, int key)
+{
+	u32 mem = ramtop();
+	u32 root = power2(mem);
+	u32 base = root;
+	u32 top = root;
+	u32 floor = 0;
+	int ct = 0;
+	
+	while(ct<nr)
+	{
+		u32 fspace = 0;
+
+		/*
+		 *	Find the largest block we will fill going upwards
+		 */
+
+		u32 high = power2(mem-top);	
+
+		/*
+		 *	Find the largest block we will fill going downwards
+		 */
+
+		u32 low = base/2;
+
+		/*
+		 *	Don't fill below 1Mb going downwards as there
+		 *	is an ISA hole in the way.
+		 */		
+		 
+		if(base <= 1024*1024)
+			low = 0;
+			
+		/*
+		 *	See how much space we could cover by filling below
+		 *	the ISA hole
+		 */
+		 
+		if(floor == 0)
+			fspace = 512*1024;
+		else if(floor ==512*1024)
+			fspace = 128*1024;
+
+		/* And forget ROM space */
+		
+		/*
+		 *	Now install the largest coverage we get
+		 */
+		 
+		if(fspace > high && fspace > low)
+		{
+			centaur_mcr_insert(ct, floor, fspace, key);
+			floor += fspace;
+		}
+		else if(high > low)
+		{
+			centaur_mcr_insert(ct, top, high, key);
+			top += high;
+		}
+		else if(low > 0)
+		{
+			base -= low;
+			centaur_mcr_insert(ct, base, low, key);
+		}
+		else break;
+		ct++;
+	}
+	/*
+	 *	We loaded ct values. We now need to set the mask. The caller
+	 *	must do this bit.
+	 */
+	 
+	return ct;
+}
+
+static void __init centaur_create_optimal_mcr(void)
+{
+	int i;
+	/*
+	 *	Allocate up to 6 mcrs to mark as much of ram as possible
+	 *	as write combining and weak write ordered.
+	 *
+	 *	To experiment with: Linux never uses stack operations for 
+	 *	mmio spaces so we could globally enable stack operation wc
+	 *
+	 *	Load the registers with type 31 - full write combining, all
+	 *	writes weakly ordered.
+	 */
+	int used = centaur_mcr_compute(6, 31);
+
+	/*
+	 *	Wipe unused MCRs
+	 */
+	 
+	for(i=used;i<8;i++)
+		wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+static void __init winchip2_create_optimal_mcr(void)
+{
+	u32 lo, hi;
+	int i;
+
+	/*
+	 *	Allocate up to 6 mcrs to mark as much of ram as possible
+	 *	as write combining, weak store ordered.
+	 *
+	 *	Load the registers with type 25
+	 *		8	-	weak write ordering
+	 *		16	-	weak read ordering
+	 *		1	-	write combining
+	 */
+
+	int used = centaur_mcr_compute(6, 25);
+	
+	/*
+	 *	Mark the registers we are using.
+	 */
+	 
+	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	for(i=0;i<used;i++)
+		lo|=1<<(9+i);
+	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	
+	/*
+	 *	Wipe unused MCRs
+	 */
+	 
+	for(i=used;i<8;i++)
+		wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+/*
+ *	Handle the MCR key on the Winchip 2.
+ */
+
+static void __init winchip2_unprotect_mcr(void)
+{
+	u32 lo, hi;
+	u32 key;
+	
+	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	lo&=~0x1C0;	/* blank bits 8-6 */
+	key = (lo>>17) & 7;
+	lo |= key<<6;	/* replace with unlock key */
+	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+
+static void __init winchip2_protect_mcr(void)
+{
+	u32 lo, hi;
+	
+	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	lo&=~0x1C0;	/* blank bits 8-6 */
+	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+#endif
+
+static void __init init_centaur(struct cpuinfo_x86 *c)
+{
+	enum {
+		ECX8=1<<1,
+		EIERRINT=1<<2,
+		DPM=1<<3,
+		DMCE=1<<4,
+		DSTPCLK=1<<5,
+		ELINEAR=1<<6,
+		DSMC=1<<7,
+		DTLOCK=1<<8,
+		EDCTLB=1<<8,
+		EMMX=1<<9,
+		DPDC=1<<11,
+		EBRPRED=1<<12,
+		DIC=1<<13,
+		DDC=1<<14,
+		DNA=1<<15,
+		ERETSTK=1<<16,
+		E2MMX=1<<19,
+		EAMD3D=1<<20,
+	};
+
+	char *name;
+	u32  fcr_set=0;
+	u32  fcr_clr=0;
+	u32  lo,hi,newlo;
+	u32  aa,bb,cc,dd;
+
+	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+	clear_bit(0*32+31, c->x86_capability);
+
+	switch (c->x86) {
+
+		case 5:
+			switch(c->x86_model) {
+			case 4:
+				name="C6";
+				fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+				fcr_clr=DPDC;
+				printk(KERN_NOTICE "Disabling bugged TSC.\n");
+				clear_bit(X86_FEATURE_TSC, c->x86_capability);
+#ifdef CONFIG_X86_OOSTORE
+				centaur_create_optimal_mcr();
+				/* Enable
+					write combining on non-stack, non-string
+					write combining on string, all types
+					weak write ordering 
+					
+				   The C6 original lacks weak read order 
+				   
+				   Note 0x120 is write only on Winchip 1 */
+				   
+				wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
+#endif				
+				break;
+			case 8:
+				switch(c->x86_mask) {
+				default:
+					name="2";
+					break;
+				case 7 ... 9:
+					name="2A";
+					break;
+				case 10 ... 15:
+					name="2B";
+					break;
+				}
+				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+				fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+				winchip2_unprotect_mcr();
+				winchip2_create_optimal_mcr();
+				rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+				/* Enable
+					write combining on non-stack, non-string
+					write combining on string, all types
+					weak write ordering 
+				*/
+				lo|=31;				
+				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+				winchip2_protect_mcr();
+#endif
+				break;
+			case 9:
+				name="3";
+				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+				fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+				winchip2_unprotect_mcr();
+				winchip2_create_optimal_mcr();
+				rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+				/* Enable
+					write combining on non-stack, non-string
+					write combining on string, all types
+					weak write ordering 
+				*/
+				lo|=31;				
+				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+				winchip2_protect_mcr();
+#endif
+				break;
+			case 10:
+				name="4";
+				/* no info on the WC4 yet */
+				break;
+			default:
+				name="??";
+			}
+
+			rdmsr(MSR_IDT_FCR1, lo, hi);
+			newlo=(lo|fcr_set) & (~fcr_clr);
+
+			if (newlo!=lo) {
+				printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
+				wrmsr(MSR_IDT_FCR1, newlo, hi );
+			} else {
+				printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
+			}
+			/* Emulate MTRRs using Centaur's MCR. */
+			set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
+			/* Report CX8 */
+			set_bit(X86_FEATURE_CX8, c->x86_capability);
+			/* Set 3DNow! on Winchip 2 and above. */
+			if (c->x86_model >=8)
+				set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+			/* See if we can find out some more. */
+			if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
+				/* Yes, we can. */
+				cpuid(0x80000005,&aa,&bb,&cc,&dd);
+				/* Add L1 data and code cache sizes. */
+				c->x86_cache_size = (cc>>24)+(dd>>24);
+			}
+			sprintf( c->x86_model_id, "WinChip %s", name );
+			break;
+
+		case 6:
+			switch (c->x86_model) {
+				case 6 ... 8:		/* Cyrix III family */
+					rdmsr (MSR_VIA_FCR, lo, hi);
+					lo |= (1<<1 | 1<<7);	/* Report CX8 & enable PGE */
+					wrmsr (MSR_VIA_FCR, lo, hi);
+
+					set_bit(X86_FEATURE_CX8, c->x86_capability);
+					set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+
+					get_model_name(c);
+					display_cacheinfo(c);
+					break;
+			}
+			break;
+	}
+}
+
+static unsigned int centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+	/* VIA C3 CPUs (670-68F) need further shifting. */
+	if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
+		size >>= 8;
+	return size;
+}
+
+static struct cpu_dev centaur_cpu_dev __initdata = {
+	c_vendor:	"Centaur",
+	c_ident:	{ "CentaurHauls" },
+	c_init:		init_centaur,
+	c_size_cache:	centaur_size_cache,
+};
+
+int __init centaur_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_CENTAUR] = &centaur_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(centaur_init_cpu);

arch/i386/kernel/cpu/changelog

+/*
+ *  Enhanced CPU type detection by Mike Jagdis, Patrick St. Jean
+ *  and Martin Mares, November 1997.
+ *
+ *  Force Cyrix 6x86(MX) and M II processors to report MTRR capability
+ *  and Cyrix "coma bug" recognition by
+ *  Zoltn Bszrmnyi <zboszor@mail.externet.hu> February 1999.
+ * 
+ *  Force Centaur C6 processors to report MTRR capability.
+ *  Bart Hartgers <bart@etpmod.phys.tue.nl>, May 1999.
+ *
+ *  Intel Mobile Pentium II detection fix. Sean Gilley, June 1999.
+ *
+ *  IDT Winchip tweaks, misc clean ups.
+ *  Dave Jones <davej@suse.de>, August 1999
+ *
+ *  Better detection of Centaur/IDT WinChip models.
+ *  Bart Hartgers <bart@etpmod.phys.tue.nl>, August 1999.
+ *
+ *  Cleaned up cache-detection code
+ *  Dave Jones <davej@suse.de>, October 1999
+ *
+ *  Added proper L2 cache detection for Coppermine
+ *  Dragan Stancevic <visitor@valinux.com>, October 1999
+ *
+ *  Added the original array for capability flags but forgot to credit 
+ *  myself :) (~1998) Fixed/cleaned up some cpu_model_info and other stuff
+ *  Jauder Ho <jauderho@carumba.com>, January 2000
+ *
+ *  Detection for Celeron coppermine, identify_cpu() overhauled,
+ *  and a few other clean ups.
+ *  Dave Jones <davej@suse.de>, April 2000
+ *
+ *  Pentium III FXSR, SSE support
+ *  General FPU state handling cleanups
+ *  Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ *  Added proper Cascades CPU and L2 cache detection for Cascades
+ *  and 8-way type cache happy bunch from Intel:^)
+ *  Dragan Stancevic <visitor@valinux.com>, May 2000 
+ *
+ *  Forward port AMD Duron errata T13 from 2.2.17pre
+ *  Dave Jones <davej@suse.de>, August 2000
+ *
+ *  Forward port lots of fixes/improvements from 2.2.18pre
+ *  Cyrix III, Pentium IV support.
+ *  Dave Jones <davej@suse.de>, October 2000
+ *
+ *  Massive cleanup of CPU detection and bug handling;
+ *  Transmeta CPU detection,
+ *  H. Peter Anvin <hpa@zytor.com>, November 2000
+ *
+ *  VIA C3 Support.
+ *  Dave Jones <davej@suse.de>, March 2001
+ *
+ *  AMD Athlon/Duron/Thunderbird bluesmoke support.
+ *  Dave Jones <davej@suse.de>, April 2001.
+ *
+ *  CacheSize bug workaround updates for AMD, Intel & VIA Cyrix.
+ *  Dave Jones <davej@suse.de>, September, October 2001.
+ *
+ */
+

arch/i386/kernel/cpu/common.c

+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+
+#include "cpu.h"
+
+static int cachesize_override __initdata = -1;
+static int disable_x86_fxsr __initdata = 0;
+
+struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
+
+static struct cpu_dev default_cpu;
+static struct cpu_dev * this_cpu = &default_cpu;
+
+extern void mcheck_init(struct cpuinfo_x86 *c);
+
+static void default_init(struct cpuinfo_x86 * c)
+{
+	/* Not much we can do here... */
+	/* Check if at least it has cpuid */
+	if (c->cpuid_level == -1) {
+		/* No cpuid. It must be an ancient CPU */
+		if (c->x86 == 4)
+			strcpy(c->x86_model_id, "486");
+		else if (c->x86 == 3)
+			strcpy(c->x86_model_id, "386");
+	}
+}
+
+static struct cpu_dev default_cpu = {
+	c_init:	default_init,
+};
+
+static int __init cachesize_setup(char *str)
+{
+	get_option (&str, &cachesize_override);
+	return 1;
+}
+__setup("cachesize=", cachesize_setup);
+
+#ifndef CONFIG_X86_TSC
+static int tsc_disable __initdata = 0;
+
+static int __init tsc_setup(char *str)
+{
+	tsc_disable = 1;
+	return 1;
+}
+
+__setup("notsc", tsc_setup);
+#endif
+
+int __init get_model_name(struct cpuinfo_x86 *c)
+{
+	unsigned int *v;
+	char *p, *q;
+
+	if (cpuid_eax(0x80000000) < 0x80000004)
+		return 0;
+
+	v = (unsigned int *) c->x86_model_id;
+	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
+	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
+	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
+	c->x86_model_id[48] = 0;
+
+	/* Intel chips right-justify this string for some dumb reason;
+	   undo that brain damage */
+	p = q = &c->x86_model_id[0];
+	while ( *p == ' ' )
+	     p++;
+	if ( p != q ) {
+	     while ( *p )
+		  *q++ = *p++;
+	     while ( q <= &c->x86_model_id[48] )
+		  *q++ = '\0';	/* Zero-pad the rest */
+	}
+
+	return 1;
+}
+
+
+void __init display_cacheinfo(struct cpuinfo_x86 *c)
+{
+	unsigned int n, dummy, ecx, edx, l2size;
+
+	n = cpuid_eax(0x80000000);
+
+	if (n >= 0x80000005) {
+		cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
+		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
+			edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+		c->x86_cache_size=(ecx>>24)+(edx>>24);	
+	}
+
+	if (n < 0x80000006)	/* Some chips just has a large L1. */
+		return;
+
+	ecx = cpuid_ecx(0x80000006);
+	l2size = ecx >> 16;
+	
+	/* do processor-specific cache resizing */
+	if (this_cpu->c_size_cache)
+		l2size = this_cpu->c_size_cache(c,l2size);
+
+	/* Allow user to override all this if necessary. */
+	if (cachesize_override != -1)
+		l2size = cachesize_override;
+
+	if ( l2size == 0 )
+		return;		/* Again, no L2 cache is possible */
+
+	c->x86_cache_size = l2size;
+
+	printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
+	       l2size, ecx & 0xFF);
+}
+
+/* Naming convention should be: <Name> [(<Codename>)] */
+/* This table only is used unless init_<vendor>() below doesn't set it; */
+/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
+
+/* Look up CPU names by table lookup. */
+static char __init *table_lookup_model(struct cpuinfo_x86 *c)
+{
+	struct cpu_model_info *info;
+
+	if ( c->x86_model >= 16 )
+		return NULL;	/* Range check */
+
+	if (!this_cpu)
+		return NULL;
+
+	info = this_cpu->c_models;
+
+	while (info && info->family) {
+		if (info->family == c->x86)
+			return info->model_names[c->x86_model];
+		info++;
+	}
+	return NULL;		/* Not found */
+}
+
+
+
+void __init get_cpu_vendor(struct cpuinfo_x86 *c)
+{
+	char *v = c->x86_vendor_id;
+	int i;
+
+	for (i = 0; i < X86_VENDOR_NUM; i++) {
+		if (cpu_devs[i]) {
+			if (!strcmp(v,cpu_devs[i]->c_ident[0]) ||
+			    (cpu_devs[i]->c_ident[1] && 
+			     !strcmp(v,cpu_devs[i]->c_ident[1]))) {
+				c->x86_vendor = i;
+				this_cpu = cpu_devs[i];
+				break;
+			}
+		}
+	}
+}
+
+
+static int __init x86_fxsr_setup(char * s)
+{
+	disable_x86_fxsr = 1;
+	return 1;
+}
+__setup("nofxsr", x86_fxsr_setup);
+
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(u32 flag)
+{
+	u32 f1, f2;
+
+	asm("pushfl\n\t"
+	    "pushfl\n\t"
+	    "popl %0\n\t"
+	    "movl %0,%1\n\t"
+	    "xorl %2,%0\n\t"
+	    "pushl %0\n\t"
+	    "popfl\n\t"
+	    "pushfl\n\t"
+	    "popl %0\n\t"
+	    "popfl\n\t"
+	    : "=&r" (f1), "=&r" (f2)
+	    : "ir" (flag));
+
+	return ((f1^f2) & flag) != 0;
+}
+
+
+/* Probe for the CPUID instruction */
+int __init have_cpuid_p(void)
+{
+	return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+void __init generic_identify(struct cpuinfo_x86 * c)
+{
+	u32 tfms;
+	int junk;
+
+	if (have_cpuid_p()) {
+		/* Get vendor name */
+		cpuid(0x00000000, &c->cpuid_level,
+		      (int *)&c->x86_vendor_id[0],
+		      (int *)&c->x86_vendor_id[8],
+		      (int *)&c->x86_vendor_id[4]);
+		
+		get_cpu_vendor(c);
+		/* Initialize the standard set of capabilities */
+		/* Note that the vendor-specific code below might override */
+	
+		/* Intel-defined flags: level 0x00000001 */
+		if ( c->cpuid_level >= 0x00000001 ) {
+			u32 capability;
+			cpuid(0x00000001, &tfms, &junk, &junk, &capability);
+			c->x86_capability[0] = capability;
+			c->x86 = (tfms >> 8) & 15;
+			c->x86_model = (tfms >> 4) & 15;
+			c->x86_mask = tfms & 15;
+		} else {
+			/* Have CPUID level 0 only - unheard of */
+			c->x86 = 4;
+		}
+	}
+}
+
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+void __init identify_cpu(struct cpuinfo_x86 *c)
+{
+	int i;
+
+	c->loops_per_jiffy = loops_per_jiffy;
+	c->x86_cache_size = -1;
+	c->x86_vendor = X86_VENDOR_UNKNOWN;
+	c->cpuid_level = -1;	/* CPUID not detected */
+	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
+	c->x86_vendor_id[0] = '\0'; /* Unset */
+	c->x86_model_id[0] = '\0';  /* Unset */
+	memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+	if (!have_cpuid_p()) {
+		/* First of all, decide if this is a 486 or higher */
+		/* It's a 486 if we can modify the AC flag */
+		if ( flag_is_changeable_p(X86_EFLAGS_AC) )
+			c->x86 = 4;
+		else
+			c->x86 = 3;
+	}
+
+	if (this_cpu->c_identify)
+		this_cpu->c_identify(c);
+	else
+		generic_identify(c);
+
+	printk(KERN_DEBUG "CPU: Before vendor init, caps: %08lx %08lx %08lx, vendor = %d\n",
+	       c->x86_capability[0],
+	       c->x86_capability[1],
+	       c->x86_capability[2],
+	       c->x86_vendor);
+
+	/*
+	 * Vendor-specific initialization.  In this section we
+	 * canonicalize the feature flags, meaning if there are
+	 * features a certain CPU supports which CPUID doesn't
+	 * tell us, CPUID claiming incorrect flags, or other bugs,
+	 * we handle them here.
+	 *
+	 * At the end of this section, c->x86_capability better
+	 * indicate the features this CPU genuinely supports!
+	 */
+	if (this_cpu->c_init)
+		this_cpu->c_init(c);
+
+	printk(KERN_DEBUG "CPU: After vendor init, caps: %08lx %08lx %08lx %08lx\n",
+	       c->x86_capability[0],
+	       c->x86_capability[1],
+	       c->x86_capability[2],
+	       c->x86_capability[3]);
+
+	/*
+	 * The vendor-specific functions might have changed features.  Now
+	 * we do "generic changes."
+	 */
+
+	/* TSC disabled? */
+#ifndef CONFIG_X86_TSC
+	if ( tsc_disable )
+		clear_bit(X86_FEATURE_TSC, c->x86_capability);
+#endif
+
+	/* FXSR disabled? */
+	if (disable_x86_fxsr) {
+		clear_bit(X86_FEATURE_FXSR, c->x86_capability);
+		clear_bit(X86_FEATURE_XMM, c->x86_capability);
+	}
+
+	/* Init Machine Check Exception if available. */
+	mcheck_init(c);
+
+	/* If the model name is still unset, do table lookup. */
+	if ( !c->x86_model_id[0] ) {
+		char *p;
+		p = table_lookup_model(c);
+		if ( p )
+			strcpy(c->x86_model_id, p);
+		else
+			/* Last resort... */
+			sprintf(c->x86_model_id, "%02x/%02x",
+				c->x86_vendor, c->x86_model);
+	}
+
+	/* Now the feature flags better reflect actual CPU features! */
+
+	printk(KERN_DEBUG "CPU:     After generic, caps: %08lx %08lx %08lx %08lx\n",
+	       c->x86_capability[0],
+	       c->x86_capability[1],
+	       c->x86_capability[2],
+	       c->x86_capability[3]);
+
+	/*
+	 * On SMP, boot_cpu_data holds the common feature set between
+	 * all CPUs; so make sure that we indicate which features are
+	 * common between the CPUs.  The first time this routine gets
+	 * executed, c == &boot_cpu_data.
+	 */
+	if ( c != &boot_cpu_data ) {
+		/* AND the already accumulated flags with these */
+		for ( i = 0 ; i < NCAPINTS ; i++ )
+			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
+	}
+
+	printk(KERN_DEBUG "CPU:             Common caps: %08lx %08lx %08lx %08lx\n",
+	       boot_cpu_data.x86_capability[0],
+	       boot_cpu_data.x86_capability[1],
+	       boot_cpu_data.x86_capability[2],
+	       boot_cpu_data.x86_capability[3]);
+}
+/*
+ *	Perform early boot up checks for a valid TSC. See arch/i386/kernel/time.c
+ */
+ 
+void __init dodgy_tsc(void)
+{
+	get_cpu_vendor(&boot_cpu_data);
+	if (( boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX ) ||
+	    ( boot_cpu_data.x86_vendor == X86_VENDOR_NSC   ))
+		cpu_devs[X86_VENDOR_CYRIX]->c_init(&boot_cpu_data);
+}
+
+void __init print_cpu_info(struct cpuinfo_x86 *c)
+{
+	char *vendor = NULL;
+
+	if (c->x86_vendor < X86_VENDOR_NUM)
+		vendor = this_cpu->c_vendor;
+	else if (c->cpuid_level >= 0)
+		vendor = c->x86_vendor_id;
+
+	if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
+		printk("%s ", vendor);
+
+	if (!c->x86_model_id[0])
+		printk("%d86", c->x86);
+	else
+		printk("%s", c->x86_model_id);
+
+	if (c->x86_mask || c->cpuid_level >= 0) 
+		printk(" stepping %02x\n", c->x86_mask);
+	else
+		printk("\n");
+}
+
+unsigned long cpu_initialized __initdata = 0;
+
+/* This is hacky. :)
+ * We're emulating future behavior.
+ * In the future, the cpu-specific init functions will be called implicitly
+ * via the magic of initcalls.
+ * They will insert themselves into the cpu_devs structure.
+ * Then, when cpu_init() is called, we can just iterate over that array.
+ */
+
+extern int intel_cpu_init(void);
+extern int cyrix_init_cpu(void);
+extern int nsc_init_cpu(void);
+extern int amd_init_cpu(void);
+extern int centaur_init_cpu(void);
+extern int transmeta_init_cpu(void);
+extern int rise_init_cpu(void);
+extern int nexgen_init_cpu(void);
+extern int umc_init_cpu(void);
+
+void __init early_cpu_init(void)
+{
+	intel_cpu_init();
+	cyrix_init_cpu();
+	nsc_init_cpu();
+	amd_init_cpu();
+	centaur_init_cpu();
+	transmeta_init_cpu();
+	rise_init_cpu();
+	nexgen_init_cpu();
+	umc_init_cpu();
+}
+/*
+ * cpu_init() initializes state that is per-CPU. Some data is already
+ * initialized (naturally) in the bootstrap process, such as the GDT
+ * and IDT. We reload them nevertheless, this function acts as a
+ * 'CPU state barrier', nothing should get across.
+ */
+void __init cpu_init (void)
+{
+	int nr = smp_processor_id();
+	struct tss_struct * t = &init_tss[nr];
+
+	if (test_and_set_bit(nr, &cpu_initialized)) {
+		printk(KERN_WARNING "CPU#%d already initialized!\n", nr);
+		for (;;) __sti();
+	}
+	printk(KERN_INFO "Initializing CPU#%d\n", nr);
+
+	if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
+		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+#ifndef CONFIG_X86_TSC
+	if (tsc_disable && cpu_has_tsc) {
+		printk(KERN_NOTICE "Disabling TSC...\n");
+		/**** FIX-HPA: DOES THIS REALLY BELONG HERE? ****/
+		clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability);
+		set_in_cr4(X86_CR4_TSD);
+	}
+#endif
+
+	__asm__ __volatile__("lgdt %0": "=m" (gdt_descr));
+	__asm__ __volatile__("lidt %0": "=m" (idt_descr));
+
+	/*
+	 * Delete NT
+	 */
+	__asm__("pushfl ; andl $0xffffbfff,(%esp) ; popfl");
+
+	/*
+	 * set up and load the per-CPU TSS and LDT
+	 */
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	if(current->mm)
+		BUG();
+	enter_lazy_tlb(&init_mm, current, nr);
+
+	t->esp0 = current->thread.esp0;
+	set_tss_desc(nr,t);
+	gdt_table[__TSS(nr)].b &= 0xfffffdff;
+	load_TR(nr);
+	load_LDT(&init_mm.context);
+
+	/* Clear %fs and %gs. */
+	asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
+
+	/* Clear all 6 debug registers: */
+
+#define CD(register) __asm__("movl %0,%%db" #register ::"r"(0) );
+
+	CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
+
+#undef CD
+
+	/*
+	 * Force FPU initialization:
+	 */
+	clear_thread_flag(TIF_USEDFPU);
+	current->used_math = 0;
+	stts();
+}

arch/i386/kernel/cpu/cpu.h

+
+struct cpu_model_info {
+	int vendor;
+	int family;
+	char *model_names[16];
+};
+
+/* attempt to consolidate cpu attributes */
+struct cpu_dev {
+	char	* c_vendor;
+
+	/* some have two possibilities for cpuid string */
+	char	* c_ident[2];	
+
+	struct		cpu_model_info c_models[4];
+
+	void		(*c_init)(struct cpuinfo_x86 * c);
+	void		(*c_identify)(struct cpuinfo_x86 * c);
+	unsigned int	(*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+};
+
+extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+
+extern int get_model_name(struct cpuinfo_x86 *c);
+extern void display_cacheinfo(struct cpuinfo_x86 *c);
+
+extern void generic_identify(struct cpuinfo_x86 * c);
+extern int have_cpuid_p(void);

arch/i386/kernel/cpu/cyrix.c

+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/pci_ids.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
+ */
+void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+	unsigned char ccr2, ccr3;
+	unsigned long flags;
+	
+	/* we test for DEVID by checking whether CCR3 is writable */
+	local_irq_save(flags);
+	ccr3 = getCx86(CX86_CCR3);
+	setCx86(CX86_CCR3, ccr3 ^ 0x80);
+	getCx86(0xc0);   /* dummy to change bus */
+
+	if (getCx86(CX86_CCR3) == ccr3) {       /* no DEVID regs. */
+		ccr2 = getCx86(CX86_CCR2);
+		setCx86(CX86_CCR2, ccr2 ^ 0x04);
+		getCx86(0xc0);  /* dummy */
+
+		if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
+			*dir0 = 0xfd;
+		else {                          /* Cx486S A step */
+			setCx86(CX86_CCR2, ccr2);
+			*dir0 = 0xfe;
+		}
+	}
+	else {
+		setCx86(CX86_CCR3, ccr3);  /* restore CCR3 */
+
+		/* read DIR0 and DIR1 CPU registers */
+		*dir0 = getCx86(CX86_DIR0);
+		*dir1 = getCx86(CX86_DIR1);
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
+ * order to identify the Cyrix CPU model after we're out of setup.c
+ *
+ * Actually since bugs.h doesnt even reference this perhaps someone should
+ * fix the documentation ???
+ */
+static unsigned char Cx86_dir0_msb __initdata = 0;
+
+static char Cx86_model[][9] __initdata = {
+	"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
+	"M II ", "Unknown"
+};
+static char Cx486_name[][5] __initdata = {
+	"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
+	"SRx2", "DRx2"
+};
+static char Cx486S_name[][4] __initdata = {
+	"S", "S2", "Se", "S2e"
+};
+static char Cx486D_name[][4] __initdata = {
+	"DX", "DX2", "?", "?", "?", "DX4"
+};
+static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __initdata = "12??43";
+static char cyrix_model_mult2[] __initdata = "12233445";
+
+/*
+ * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
+ * BIOSes for compatability with DOS games.  This makes the udelay loop
+ * work correctly, and improves performance.
+ *
+ * FIXME: our newer udelay uses the tsc. We dont need to frob with SLOP
+ */
+
+extern void calibrate_delay(void) __init;
+
+static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+{
+	unsigned long flags;
+	
+	if (Cx86_dir0_msb == 3) {
+		unsigned char ccr3, ccr5;
+
+		local_irq_save(flags);
+		ccr3 = getCx86(CX86_CCR3);
+		setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+		ccr5 = getCx86(CX86_CCR5);
+		if (ccr5 & 2)
+			setCx86(CX86_CCR5, ccr5 & 0xfd);  /* reset SLOP */
+		setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
+		local_irq_restore(flags);
+
+		if (ccr5 & 2) { /* possible wrong calibration done */
+			printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n");
+			calibrate_delay();
+			c->loops_per_jiffy = loops_per_jiffy;
+		}
+	}
+}
+
+static void __init init_cyrix(struct cpuinfo_x86 *c)
+{
+	unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
+	char *buf = c->x86_model_id;
+	const char *p = NULL;
+
+	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+	clear_bit(0*32+31, c->x86_capability);
+
+	/* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
+	if ( test_bit(1*32+24, c->x86_capability) ) {
+		clear_bit(1*32+24, c->x86_capability);
+		set_bit(X86_FEATURE_CXMMX, c->x86_capability);
+	}
+
+	do_cyrix_devid(&dir0, &dir1);
+
+	check_cx686_slop(c);
+
+	Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+	dir0_lsn = dir0 & 0xf;                /* model or clock multiplier */
+
+	/* common case step number/rev -- exceptions handled below */
+	c->x86_model = (dir1 >> 4) + 1;
+	c->x86_mask = dir1 & 0xf;
+
+	/* Now cook; the original recipe is by Channing Corn, from Cyrix.
+	 * We do the same thing for each generation: we work out
+	 * the model, multiplier and stepping.  Black magic included,
+	 * to make the silicon step/rev numbers match the printed ones.
+	 */
+	 
+	switch (dir0_msn) {
+		unsigned char tmp;
+
+	case 0: /* Cx486SLC/DLC/SRx/DRx */
+		p = Cx486_name[dir0_lsn & 7];
+		break;
+
+	case 1: /* Cx486S/DX/DX2/DX4 */
+		p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
+			: Cx486S_name[dir0_lsn & 3];
+		break;
+
+	case 2: /* 5x86 */
+		Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+		p = Cx86_cb+2;
+		break;
+
+	case 3: /* 6x86/6x86L */
+		Cx86_cb[1] = ' ';
+		Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+		if (dir1 > 0x21) { /* 686L */
+			Cx86_cb[0] = 'L';
+			p = Cx86_cb;
+			(c->x86_model)++;
+		} else             /* 686 */
+			p = Cx86_cb+1;
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+		/* 6x86's contain this bug */
+		c->coma_bug = 1;
+		break;
+
+	case 4: /* MediaGX/GXm */
+#ifdef CONFIG_PCI
+		/* It isn't really a PCI quirk directly, but the cure is the
+		   same. The MediaGX has deep magic SMM stuff that handles the
+		   SB emulation. It thows away the fifo on disable_dma() which
+		   is wrong and ruins the audio. 
+
+		   Bug2: VSA1 has a wrap bug so that using maximum sized DMA 
+		   causes bad things. According to NatSemi VSA2 has another
+		   bug to do with 'hlt'. I've not seen any boards using VSA2
+		   and X doesn't seem to support it either so who cares 8).
+		   VSA1 we work around however.
+		*/
+
+		printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
+		isa_dma_bridge_buggy = 2;
+#endif		
+		c->x86_cache_size=16;	/* Yep 16K integrated cache thats it */
+
+		/* GXm supports extended cpuid levels 'ala' AMD */
+		if (c->cpuid_level == 2) {
+			/* Enable Natsemi MMX extensions */
+			setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+
+			get_model_name(c);  /* get CPU marketing name */
+			/*
+			 *  The 5510/5520 companion chips have a funky PIT
+			 *  that breaks the TSC synchronizing, so turn it off
+			 */
+			if(pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, NULL) ||
+				pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, NULL))
+				clear_bit(X86_FEATURE_TSC, c->x86_capability);
+			return;
+		}
+		else {  /* MediaGX */
+			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
+			p = Cx86_cb+2;
+			c->x86_model = (dir1 & 0x20) ? 1 : 2;
+#ifndef CONFIG_CS5520
+			clear_bit(X86_FEATURE_TSC, c->x86_capability);
+#endif
+		}
+		break;
+
+        case 5: /* 6x86MX/M II */
+		if (dir1 > 7)
+		{
+			dir0_msn++;  /* M II */
+			/* Enable MMX extensions (App note 108) */
+			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+		}
+		else
+		{
+			c->coma_bug = 1;      /* 6x86MX, it has the bug. */
+		}
+		tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
+		Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
+		p = Cx86_cb+tmp;
+        	if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
+			(c->x86_model)++;
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+		break;
+
+	case 0xf:  /* Cyrix 486 without DEVID registers */
+		switch (dir0_lsn) {
+		case 0xd:  /* either a 486SLC or DLC w/o DEVID */
+			dir0_msn = 0;
+			p = Cx486_name[(c->hard_math) ? 1 : 0];
+			break;
+
+		case 0xe:  /* a 486S A step */
+			dir0_msn = 0;
+			p = Cx486S_name[0];
+			break;
+		}
+		break;
+
+	default:  /* unknown (shouldn't happen, we know everyone ;-) */
+		dir0_msn = 7;
+		break;
+	}
+	strcpy(buf, Cx86_model[dir0_msn & 7]);
+	if (p) strcat(buf, p);
+	return;
+}
+
+/*
+ * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
+ * by the fact that they preserve the flags across the division of 5/2.
+ * PII and PPro exhibit this behavior too, but they have cpuid available.
+ */
+ 
+/*
+ * Perform the Cyrix 5/2 test. A Cyrix won't change
+ * the flags, while other 486 chips will.
+ */
+static inline int test_cyrix_52div(void)
+{
+	unsigned int test;
+
+	__asm__ __volatile__(
+	     "sahf\n\t"		/* clear flags (%eax = 0x0005) */
+	     "div %b2\n\t"	/* divide 5 by 2 */
+	     "lahf"		/* store flags into %ah */
+	     : "=a" (test)
+	     : "0" (5), "q" (2)
+	     : "cc");
+
+	/* AH is 0x02 on Cyrix after the divide.. */
+	return (unsigned char) (test >> 8) == 0x02;
+}
+
+static void cyrix_identify(struct cpuinfo_x86 * c)
+{
+	/* Detect Cyrix with disabled CPUID */
+	if ( c->x86 == 4 && test_cyrix_52div() ) {
+		unsigned char dir0, dir1;
+		
+		strcpy(c->x86_vendor_id, "CyrixInstead");
+	        c->x86_vendor = X86_VENDOR_CYRIX;
+	        
+	        /* Actually enable cpuid on the older cyrix */
+	    
+	    	/* Retrieve CPU revisions */
+	    	
+		do_cyrix_devid(&dir0, &dir1);
+
+		dir0>>=4;		
+		
+		/* Check it is an affected model */
+		
+   	        if (dir0 == 5 || dir0 == 3)
+   	        {
+			unsigned char ccr3, ccr4;
+			unsigned long flags;
+			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
+			local_irq_save(flags);
+			ccr3 = getCx86(CX86_CCR3);
+			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+			ccr4 = getCx86(CX86_CCR4);
+			setCx86(CX86_CCR4, ccr4 | 0x80);          /* enable cpuid  */
+			setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
+			local_irq_restore(flags);
+		}
+	}
+	generic_identify(c);
+}
+
+static struct cpu_dev cyrix_cpu_dev __initdata = {
+	c_vendor:	"Cyrix",
+	c_ident: 	{ "CyrixInstead" },
+	c_init:		init_cyrix,
+	c_identify:	cyrix_identify,
+};
+
+int __init cyrix_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(cyrix_init_cpu);
+
+static struct cpu_dev nsc_cpu_dev __initdata = {
+	c_vendor:	"NSC",
+	c_ident: 	{ "Geode by NSC" },
+	c_init:		init_cyrix,
+	c_identify:	generic_identify,
+};
+
+int __init nsc_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(nsc_init_cpu);

arch/i386/kernel/cpu/intel.c

+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/msr.h>
+
+#include "cpu.h"
+
+static int disable_x86_serial_nr __initdata = 1;
+static int disable_P4_HT __initdata = 0;
+extern int trap_init_f00f_bug(void);
+
+/*
+ *	Early probe support logic for ppro memory erratum #50
+ *
+ *	This is called before we do cpu ident work
+ */
+ 
+int __init ppro_with_ram_bug(void)
+{
+	char vendor_id[16];
+	int ident;
+
+	/* Must have CPUID */
+	if(!have_cpuid_p())
+		return 0;
+	if(cpuid_eax(0)<1)
+		return 0;
+	
+	/* Must be Intel */
+	cpuid(0, &ident, 
+		(int *)&vendor_id[0],
+		(int *)&vendor_id[8],
+		(int *)&vendor_id[4]);
+	
+	if(memcmp(vendor_id, "IntelInside", 12))
+		return 0;
+	
+	ident = cpuid_eax(1);
+
+	/* Model 6 */
+
+	if(((ident>>8)&15)!=6)
+		return 0;
+	
+	/* Pentium Pro */
+
+	if(((ident>>4)&15)!=1)
+		return 0;
+	
+	if((ident&15) < 8)
+	{
+		printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
+		return 1;
+	}
+	printk(KERN_INFO "Your Pentium Pro seems ok.\n");
+	return 0;
+}
+	
+static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+	if( test_bit(X86_FEATURE_PN, c->x86_capability) &&
+	    disable_x86_serial_nr ) {
+		/* Disable processor serial number */
+		unsigned long lo,hi;
+		rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+		lo |= 0x200000;
+		wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+		printk(KERN_NOTICE "CPU serial number disabled.\n");
+		clear_bit(X86_FEATURE_PN, c->x86_capability);
+
+		/* Disabling the serial number may affect the cpuid level */
+		c->cpuid_level = cpuid_eax(0);
+	}
+}
+
+static int __init x86_serial_nr_setup(char *s)
+{
+	disable_x86_serial_nr = 0;
+	return 1;
+}
+__setup("serialnumber", x86_serial_nr_setup);
+
+static int __init P4_disable_ht(char *s)
+{
+	disable_P4_HT = 1;
+	return 1;
+}
+__setup("noht", P4_disable_ht);
+
+
+static void __init init_intel(struct cpuinfo_x86 *c)
+{
+	char *p = NULL;
+	unsigned int l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
+
+#ifdef CONFIG_X86_F00F_BUG
+	/*
+	 * All current models of Pentium and Pentium with MMX technology CPUs
+	 * have the F0 0F bug, which lets nonpriviledged users lock up the system.
+	 * Note that the workaround only should be initialized once...
+	 */
+	c->f00f_bug = 0;
+	if ( c->x86 == 5 ) {
+		static int f00f_workaround_enabled = 0;
+
+		c->f00f_bug = 1;
+		if ( !f00f_workaround_enabled ) {
+			trap_init_f00f_bug();
+			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
+			f00f_workaround_enabled = 1;
+		}
+	}
+#endif
+
+
+	if (c->cpuid_level > 1) {
+		/* supports eax=2  call */
+		int i, j, n;
+		int regs[4];
+		unsigned char *dp = (unsigned char *)regs;
+
+		/* Number of times to iterate */
+		n = cpuid_eax(2) & 0xFF;
+
+		for ( i = 0 ; i < n ; i++ ) {
+			cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
+			
+			/* If bit 31 is set, this is an unknown format */
+			for ( j = 0 ; j < 3 ; j++ ) {
+				if ( regs[j] < 0 ) regs[j] = 0;
+			}
+
+			/* Byte 0 is level count, not a descriptor */
+			for ( j = 1 ; j < 16 ; j++ ) {
+				unsigned char des = dp[j];
+				unsigned char dl, dh;
+				unsigned int cs;
+
+				dh = des >> 4;
+				dl = des & 0x0F;
+
+				/* Black magic... */
+
+				switch ( dh )
+				{
+				case 0:
+					switch ( dl ) {
+					case 6:
+						/* L1 I cache */
+						l1i += 8;
+						break;
+					case 8:
+						/* L1 I cache */
+						l1i += 16;
+						break;
+					case 10:
+						/* L1 D cache */
+						l1d += 8;
+						break;
+					case 12:
+						/* L1 D cache */
+						l1d += 16;
+						break;
+					default:;
+						/* TLB, or unknown */
+					}
+					break;
+				case 2:
+					if ( dl ) {
+						/* L3 cache */
+						cs = (dl-1) << 9;
+						l3 += cs;
+					}
+					break;
+				case 4:
+					if ( c->x86 > 6 && dl ) {
+						/* P4 family */
+						/* L3 cache */
+						cs = 128 << (dl-1);
+						l3 += cs;
+						break;
+					}
+					/* else same as 8 - fall through */
+				case 8:
+					if ( dl ) {
+						/* L2 cache */
+						cs = 128 << (dl-1);
+						l2 += cs;
+					}
+					break;
+				case 6:
+					if (dl > 5) {
+						/* L1 D cache */
+						cs = 8<<(dl-6);
+						l1d += cs;
+					}
+					break;
+				case 7:
+					if ( dl >= 8 ) 
+					{
+						/* L2 cache */
+						cs = 64<<(dl-8);
+						l2 += cs;
+					} else {
+						/* L0 I cache, count as L1 */
+						cs = dl ? (16 << (dl-1)) : 12;
+						l1i += cs;
+					}
+					break;
+				default:
+					/* TLB, or something else we don't know about */
+					break;
+				}
+			}
+		}
+		if ( l1i || l1d )
+			printk(KERN_INFO "CPU: L1 I cache: %dK, L1 D cache: %dK\n",
+			      l1i, l1d);
+		if ( l2 )
+			printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
+		if ( l3 )
+			printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
+
+		/*
+		 * This assumes the L3 cache is shared; it typically lives in
+		 * the northbridge.  The L1 caches are included by the L2
+		 * cache, and so should not be included for the purpose of
+		 * SMP switching weights.
+		 */
+		c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+	}
+
+	/* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it */
+	if ( c->x86 == 6 && c->x86_model < 3 && c->x86_mask < 3 )
+		clear_bit(X86_FEATURE_SEP, c->x86_capability);
+	
+	/* Names for the Pentium II/Celeron processors 
+	   detectable only by also checking the cache size.
+	   Dixon is NOT a Celeron. */
+	if (c->x86 == 6) {
+		switch (c->x86_model) {
+		case 5:
+			if (l2 == 0)
+				p = "Celeron (Covington)";
+			if (l2 == 256)
+				p = "Mobile Pentium II (Dixon)";
+			break;
+			
+		case 6:
+			if (l2 == 128)
+				p = "Celeron (Mendocino)";
+			break;
+			
+		case 8:
+			if (l2 == 128)
+				p = "Celeron (Coppermine)";
+			break;
+		}
+	}
+
+	if ( p )
+		strcpy(c->x86_model_id, p);
+	
+#ifdef CONFIG_SMP
+	if (test_bit(X86_FEATURE_HT, c->x86_capability) && !disable_P4_HT) {
+		extern	int phys_proc_id[NR_CPUS];
+		
+		u32 	eax, ebx, ecx, edx;
+		int 	index_lsb, index_msb, tmp;
+		int	initial_apic_id;
+		int 	cpu = smp_processor_id();
+
+		cpuid(1, &eax, &ebx, &ecx, &edx);
+		smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+		if (smp_num_siblings == 1) {
+			printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
+		} else if (smp_num_siblings > 1 ) {
+			index_lsb = 0;
+			index_msb = 31;
+			/*
+			 * At this point we only support two siblings per
+			 * processor package.
+			 */
+#define NR_SIBLINGS	2
+			if (smp_num_siblings != NR_SIBLINGS) {
+				printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
+				smp_num_siblings = 1;
+				goto too_many_siblings;
+			}
+			tmp = smp_num_siblings;
+			while ((tmp & 1) == 0) {
+				tmp >>=1 ;
+				index_lsb++;
+			}
+			tmp = smp_num_siblings;
+			while ((tmp & 0x80000000 ) == 0) {
+				tmp <<=1 ;
+				index_msb--;
+			}
+			if (index_lsb != index_msb )
+				index_msb++;
+			initial_apic_id = ebx >> 24 & 0xff;
+			phys_proc_id[cpu] = initial_apic_id >> index_msb;
+
+			printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+                               phys_proc_id[cpu]);
+		}
+
+	}
+too_many_siblings:
+
+	if (disable_P4_HT)
+		clear_bit(X86_FEATURE_HT, &c->x86_capability);
+#endif
+
+	/* Disable the PN if appropriate */
+	squash_the_stupid_serial_number(c);
+}
+
+static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+	/* Intel PIII Tualatin. This comes in two flavours.
+	 * One has 256kb of cache, the other 512. We have no way
+	 * to determine which, so we use a boottime override
+	 * for the 512kb model, and assume 256 otherwise.
+	 */
+	if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
+		size = 256;
+	return size;
+}
+
+static struct cpu_dev intel_cpu_dev __initdata = {
+	c_vendor:	"Intel",
+	c_ident: 	{ "GenuineIntel" },
+	c_models: {
+		{ X86_VENDOR_INTEL,	4,
+		  { 
+			  [0] "486 DX-25/33", 
+			  [1] "486 DX-50", 
+			  [2] "486 SX", 
+			  [3] "486 DX/2", 
+			  [4] "486 SL", 
+			  [5] "486 SX/2", 
+			  [7] "486 DX/2-WB", 
+			  [8] "486 DX/4", 
+			  [9] "486 DX/4-WB"
+		  }
+		},
+		{ X86_VENDOR_INTEL,	5,
+		  { 
+			  [0] "Pentium 60/66 A-step", 
+			  [1] "Pentium 60/66", 
+			  [2] "Pentium 75 - 200",
+			  [3] "OverDrive PODP5V83", 
+			  [4] "Pentium MMX",
+			  [7] "Mobile Pentium 75 - 200", 
+			  [8] "Mobile Pentium MMX"
+		  }
+		},
+	},
+	c_init:		init_intel,
+	c_identify:	generic_identify,
+	c_size_cache:	intel_size_cache,
+};
+
+__init int intel_cpu_init(void)
+{
+	cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev;
+	return 0;
+}
+
+// arch_initcall(intel_cpu_init);
+

arch/i386/kernel/cpu/nexgen.c

+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ *	Detect a NexGen CPU running without BIOS hypercode new enough
+ *	to have CPUID. (Thanks to Herbert Oppmann)
+ */
+ 
+static int __init deep_magic_nexgen_probe(void)
+{
+	int ret;
+	
+	__asm__ __volatile__ (
+		"	movw	$0x5555, %%ax\n"
+		"	xorw	%%dx,%%dx\n"
+		"	movw	$2, %%cx\n"
+		"	divw	%%cx\n"
+		"	movl	$0, %%eax\n"
+		"	jnz	1f\n"
+		"	movl	$1, %%eax\n"
+		"1:\n" 
+		: "=a" (ret) : : "cx", "dx" );
+	return  ret;
+}
+
+static void __init init_nexgen(struct cpuinfo_x86 * c)
+{
+	c->x86_cache_size = 256; /* A few had 1 MB... */
+}
+
+static void nexgen_identify(struct cpuinfo_x86 * c)
+{
+	/* Detect NexGen with old hypercode */
+	if ( deep_magic_nexgen_probe() ) {
+		strcpy(c->x86_vendor_id, "NexGenDriven");
+	}
+	generic_identify(c);
+}
+
+static struct cpu_dev nexgen_cpu_dev __initdata = {
+	c_vendor:	"Nexgen",
+	c_ident:	{ "NexGenDriven" },
+	c_models: {
+		{ X86_VENDOR_NEXGEN,5, { [1] "Nx586" } },
+	},
+	c_init:		init_nexgen,
+	c_identify:	nexgen_identify,
+};
+
+int __init nexgen_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_NEXGEN] = &nexgen_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(nexgen_init_cpu);

arch/i386/kernel/cpu/proc.c

+#include <linux/smp.h>
+#include <linux/timex.h>
+#include <linux/string.h>
+#include <asm/semaphore.h>
+#include <linux/seq_file.h>
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	/* 
+	 * These flag bits must match the definitions in <asm/cpufeature.h>.
+	 * NULL means this bit is undefined or reserved; either way it doesn't
+	 * have meaning as far as Linux is concerned.  Note that it's important
+	 * to realize there is a difference between this table and CPUID -- if
+	 * applications want to get the raw CPUID data, they should access
+	 * /dev/cpu/<cpu_nr>/cpuid instead.
+	 */
+	static char *x86_cap_flags[] = {
+		/* Intel-defined */
+	        "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
+	        "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
+	        "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
+	        "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", NULL,
+
+		/* AMD-defined */
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, "mp", NULL, NULL, "mmxext", NULL,
+		NULL, NULL, NULL, NULL, NULL, "lm", "3dnowext", "3dnow",
+
+		/* Transmeta-defined */
+		"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+		/* Other (Linux-defined) */
+		"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	};
+	struct cpuinfo_x86 *c = v;
+	int i, n = c - cpu_data;
+	int fpu_exception;
+
+#ifdef CONFIG_SMP
+	if (!(cpu_online_map & (1<<n)))
+		return 0;
+#endif
+	seq_printf(m, "processor\t: %d\n"
+		"vendor_id\t: %s\n"
+		"cpu family\t: %d\n"
+		"model\t\t: %d\n"
+		"model name\t: %s\n",
+		n,
+		c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
+		c->x86,
+		c->x86_model,
+		c->x86_model_id[0] ? c->x86_model_id : "unknown");
+
+	if (c->x86_mask || c->cpuid_level >= 0)
+		seq_printf(m, "stepping\t: %d\n", c->x86_mask);
+	else
+		seq_printf(m, "stepping\t: unknown\n");
+
+	if ( test_bit(X86_FEATURE_TSC, &c->x86_capability) ) {
+		seq_printf(m, "cpu MHz\t\t: %lu.%03lu\n",
+			cpu_khz / 1000, (cpu_khz % 1000));
+	}
+
+	/* Cache size */
+	if (c->x86_cache_size >= 0)
+		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
+	
+	/* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
+	fpu_exception = c->hard_math && (ignore_irq13 || cpu_has_fpu);
+	seq_printf(m, "fdiv_bug\t: %s\n"
+			"hlt_bug\t\t: %s\n"
+			"f00f_bug\t: %s\n"
+			"coma_bug\t: %s\n"
+			"fpu\t\t: %s\n"
+			"fpu_exception\t: %s\n"
+			"cpuid level\t: %d\n"
+			"wp\t\t: %s\n"
+			"flags\t\t:",
+		     c->fdiv_bug ? "yes" : "no",
+		     c->hlt_works_ok ? "no" : "yes",
+		     c->f00f_bug ? "yes" : "no",
+		     c->coma_bug ? "yes" : "no",
+		     c->hard_math ? "yes" : "no",
+		     fpu_exception ? "yes" : "no",
+		     c->cpuid_level,
+		     c->wp_works_ok ? "yes" : "no");
+
+	for ( i = 0 ; i < 32*NCAPINTS ; i++ )
+		if ( test_bit(i, &c->x86_capability) &&
+		     x86_cap_flags[i] != NULL )
+			seq_printf(m, " %s", x86_cap_flags[i]);
+
+	seq_printf(m, "\nbogomips\t: %lu.%02lu\n\n",
+		     c->loops_per_jiffy/(500000/HZ),
+		     (c->loops_per_jiffy/(5000/HZ)) % 100);
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+struct seq_operations cpuinfo_op = {
+	start:	c_start,
+	next:	c_next,
+	stop:	c_stop,
+	show:	show_cpuinfo,
+};

arch/i386/kernel/cpu/rise.c

+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static void __init init_rise(struct cpuinfo_x86 *c)
+{
+	printk("CPU: Rise iDragon");
+	if (c->x86_model > 2)
+		printk(" II");
+	printk("\n");
+
+	/* Unhide possibly hidden capability flags
+	   The mp6 iDragon family don't have MSRs.
+	   We switch on extra features with this cpuid weirdness: */
+	__asm__ (
+		"movl $0x6363452a, %%eax\n\t"
+		"movl $0x3231206c, %%ecx\n\t"
+		"movl $0x2a32313a, %%edx\n\t"
+		"cpuid\n\t"
+		"movl $0x63634523, %%eax\n\t"
+		"movl $0x32315f6c, %%ecx\n\t"
+		"movl $0x2333313a, %%edx\n\t"
+		"cpuid\n\t" : : : "eax", "ebx", "ecx", "edx"
+	);
+	set_bit(X86_FEATURE_CX8, c->x86_capability);
+}
+
+static struct cpu_dev rise_cpu_dev __initdata = {
+	c_vendor:	"Rise",
+	c_ident:	{ "RiseRiseRise" },
+	c_models: {
+		{ X86_VENDOR_RISE,	5,
+		  { 
+			  [0] "iDragon", 
+			  [2] "iDragon", 
+			  [8] "iDragon II", 
+			  [9] "iDragon II"
+		  }
+		},
+	},
+	c_init:		init_rise,
+};
+
+int __init rise_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_RISE] = &rise_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(rise_init_cpu);

arch/i386/kernel/cpu/transmeta.c

+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "cpu.h"
+
+static void __init init_transmeta(struct cpuinfo_x86 *c)
+{
+	unsigned int cap_mask, uk, max, dummy;
+	unsigned int cms_rev1, cms_rev2;
+	unsigned int cpu_rev, cpu_freq, cpu_flags;
+	char cpu_info[65];
+
+	get_model_name(c);	/* Same as AMD/Cyrix */
+	display_cacheinfo(c);
+
+	/* Print CMS and CPU revision */
+	max = cpuid_eax(0x80860000);
+	if ( max >= 0x80860001 ) {
+		cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags); 
+		printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
+		       (cpu_rev >> 24) & 0xff,
+		       (cpu_rev >> 16) & 0xff,
+		       (cpu_rev >> 8) & 0xff,
+		       cpu_rev & 0xff,
+		       cpu_freq);
+	}
+	if ( max >= 0x80860002 ) {
+		cpuid(0x80860002, &dummy, &cms_rev1, &cms_rev2, &dummy);
+		printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
+		       (cms_rev1 >> 24) & 0xff,
+		       (cms_rev1 >> 16) & 0xff,
+		       (cms_rev1 >> 8) & 0xff,
+		       cms_rev1 & 0xff,
+		       cms_rev2);
+	}
+	if ( max >= 0x80860006 ) {
+		cpuid(0x80860003,
+		      (void *)&cpu_info[0],
+		      (void *)&cpu_info[4],
+		      (void *)&cpu_info[8],
+		      (void *)&cpu_info[12]);
+		cpuid(0x80860004,
+		      (void *)&cpu_info[16],
+		      (void *)&cpu_info[20],
+		      (void *)&cpu_info[24],
+		      (void *)&cpu_info[28]);
+		cpuid(0x80860005,
+		      (void *)&cpu_info[32],
+		      (void *)&cpu_info[36],
+		      (void *)&cpu_info[40],
+		      (void *)&cpu_info[44]);
+		cpuid(0x80860006,
+		      (void *)&cpu_info[48],
+		      (void *)&cpu_info[52],
+		      (void *)&cpu_info[56],
+		      (void *)&cpu_info[60]);
+		cpu_info[64] = '\0';
+		printk(KERN_INFO "CPU: %s\n", cpu_info);
+	}
+
+	/* Unhide possibly hidden capability flags */
+	rdmsr(0x80860004, cap_mask, uk);
+	wrmsr(0x80860004, ~0, uk);
+	c->x86_capability[0] = cpuid_edx(0x00000001);
+	wrmsr(0x80860004, cap_mask, uk);
+}
+
+static void transmeta_identify(struct cpuinfo_x86 * c)
+{
+	u32 xlvl;
+	generic_identify(c);
+
+	/* Transmeta-defined flags: level 0x80860001 */
+	xlvl = cpuid_eax(0x80860000);
+	if ( (xlvl & 0xffff0000) == 0x80860000 ) {
+		if (  xlvl >= 0x80860001 )
+			c->x86_capability[2] = cpuid_edx(0x80860001);
+	}
+}
+
+static struct cpu_dev transmeta_cpu_dev __initdata = {
+	c_vendor:	"Transmeta",
+	c_ident:	{ "GenuineTMx86", "TransmetaCPU" },
+	c_init:		init_transmeta,
+	c_identify:	transmeta_identify,
+};
+
+int __init transmeta_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_TRANSMETA] = &transmeta_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(transmeta_init_cpu);

arch/i386/kernel/cpu/umc.c

+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include "cpu.h"
+
+/* UMC chips appear to be only either 386 or 486, so no special init takes place.
+ */
+static void __init init_umc(struct cpuinfo_x86 * c)
+{
+
+}
+
+static struct cpu_dev umc_cpu_dev __initdata = {
+	c_vendor:	"UMC",
+	c_ident: 	{ "UMC UMC UMC" },
+	c_models: {
+		{ X86_VENDOR_UMC,	4,
+		  { 
+			  [1] "U5D", 
+			  [2] "U5S", 
+		  }
+		},
+	},
+	c_init:		init_umc,
+};
+
+int __init umc_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_UMC] = &umc_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(umc_init_cpu);

arch/i386/kernel/setup.c

@@ -3,73 +3,16 @@
  *
  *  Copyright (C) 1995  Linus Torvalds
  *
- *  Enhanced CPU type detection by Mike Jagdis, Patrick St. Jean
- *  and Martin Mares, November 1997.
- *
- *  Force Cyrix 6x86(MX) and M II processors to report MTRR capability
- *  and Cyrix "coma bug" recognition by
- *      Zoltn Bszrmnyi <zboszor@mail.externet.hu> February 1999.
- * 
- *  Force Centaur C6 processors to report MTRR capability.
- *      Bart Hartgers <bart@etpmod.phys.tue.nl>, May 1999.
- *
- *  Intel Mobile Pentium II detection fix. Sean Gilley, June 1999.
- *
- *  IDT Winchip tweaks, misc clean ups.
- *	Dave Jones <davej@suse.de>, August 1999
- *
  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
  *
- *  Better detection of Centaur/IDT WinChip models.
- *      Bart Hartgers <bart@etpmod.phys.tue.nl>, August 1999.
- *
  *  Memory region support
  *	David Parsons <orc@pell.chi.il.us>, July-August 1999
  *
- *  Cleaned up cache-detection code
- *	Dave Jones <davej@suse.de>, October 1999
- *
- *	Added proper L2 cache detection for Coppermine
- *	Dragan Stancevic <visitor@valinux.com>, October 1999
- *
- *  Added the original array for capability flags but forgot to credit 
- *  myself :) (~1998) Fixed/cleaned up some cpu_model_info and other stuff
- *  	Jauder Ho <jauderho@carumba.com>, January 2000
- *
- *  Detection for Celeron coppermine, identify_cpu() overhauled,
- *  and a few other clean ups.
- *  Dave Jones <davej@suse.de>, April 2000
- *
- *  Pentium III FXSR, SSE support
- *  General FPU state handling cleanups
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- *
- *  Added proper Cascades CPU and L2 cache detection for Cascades
- *  and 8-way type cache happy bunch from Intel:^)
- *  Dragan Stancevic <visitor@valinux.com>, May 2000 
- *
- *  Forward port AMD Duron errata T13 from 2.2.17pre
- *  Dave Jones <davej@suse.de>, August 2000
- *
- *  Forward port lots of fixes/improvements from 2.2.18pre
- *  Cyrix III, Pentium IV support.
- *  Dave Jones <davej@suse.de>, October 2000
- *
- *  Massive cleanup of CPU detection and bug handling;
- *  Transmeta CPU detection,
- *  H. Peter Anvin <hpa@zytor.com>, November 2000
- *
  *  Added E820 sanitization routine (removes overlapping memory regions);
  *  Brian Moyle <bmoyle@mvista.com>, February 2001
  *
- *  VIA C3 Support.
- *  Dave Jones <davej@suse.de>, March 2001
- *
- *  AMD Athlon/Duron/Thunderbird bluesmoke support.
- *  Dave Jones <davej@suse.de>, April 2001.
- *
- *  CacheSize bug workaround updates for AMD, Intel & VIA Cyrix.
- *  Dave Jones <davej@suse.de>, September, October 2001.
+ * Moved CPU detection code to cpu/${cpu}.c
+ *    Patrick Mochel <mochel@osdl.org>, March 2002
  *
  */
 
@@ -77,45 +20,21 @@
  * This file handles the architecture-dependent parts of initialization
  */
 
-#include <linux/errno.h>
 #include <linux/sched.h>
-#include <linux/kernel.h>
 #include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/config.h>
-#include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/apm_bios.h>
 #ifdef CONFIG_BLK_DEV_RAM
 #include <linux/blk.h>
 #endif
-#include <linux/highmem.h>
 #include <linux/bootmem.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
 #include <linux/seq_file.h>
 #include <linux/console.h>
-#include <asm/processor.h>
-#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/cobalt.h>
-#include <asm/msr.h>
-#include <asm/desc.h>
+#include <linux/highmem.h>
 #include <asm/e820.h>
-#include <asm/dma.h>
 #include <asm/mpspec.h>
-#include <asm/mmu_context.h>
 
 /*
  * Machine setup..
@@ -126,11 +45,7 @@ struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
 
 unsigned long mmu_cr4_features;
 
-/*
- * Bus types ..
- */
 int MCA_bus;
-
 /* for MCA, but anyone else can use it if they want */
 unsigned int machine_id;
 unsigned int machine_submodel_id;
@@ -158,20 +73,15 @@ struct e820map e820;
 
 unsigned char aux_device_present;
 
-extern void mcheck_init(struct cpuinfo_x86 *c);
+extern void early_cpu_init(void);
 extern void dmi_scan_machine(void);
 extern int root_mountflags;
 extern char _text, _etext, _edata, _end;
 extern int blk_nohighio;
 void __init visws_get_board_type_and_rev(void);
 
-static int disable_x86_serial_nr __initdata = 1;
-static int disable_x86_fxsr __initdata = 0;
-
 unsigned long saved_videomode;
 
-extern unsigned long saved_videomode;
-
 /*
  * This is set up by the setup-routine at boot-time
  */
@@ -297,6 +207,22 @@ static void __init probe_roms(void)
 	}
 }
 
+static void __init limit_regions (unsigned long long size)
+{
+	int i;
+	unsigned long long current_size = 0;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		if (e820.map[i].type == E820_RAM) {
+			current_size += e820.map[i].size;
+			if (current_size >= size) {
+				e820.map[i].size -= current_size-size;
+				e820.nr_map = i + 1;
+				return;
+			}
+		}
+	}
+}
 static void __init add_memory_region(unsigned long long start,
                                   unsigned long long size, int type)
 {
@@ -598,7 +524,7 @@ static void __init parse_mem_cmdline (char ** cmdline_p)
 {
 	char c = ' ', *to = command_line, *from = COMMAND_LINE;
 	int len = 0;
-	int usermem = 0;
+	int userdef = 0;
 
 	/* Save unparsed command line copy for /proc/cmdline */
 	memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
@@ -621,32 +547,24 @@ static void __init parse_mem_cmdline (char ** cmdline_p)
 			} else if (!memcmp(from+4, "exactmap", 8)) {
 				from += 8+4;
 				e820.nr_map = 0;
-				usermem = 1;
+				userdef = 1;
 			} else {
 				/* If the user specifies memory size, we
-				 * blow away any automatically generated
-				 * size
+				 * limit the BIOS-provided memory map to
+				 * that size. exactmap can be used to specify
+				 * the exact map. mem=number can be used to
+				 * trim the existing memory map.
 				 */
 				unsigned long long start_at, mem_size;
  
-				if (usermem == 0) {
-					/* first time in: zap the whitelist
-					 * and reinitialize it with the
-					 * standard low-memory region.
-					 */
-					e820.nr_map = 0;
-					usermem = 1;
-					add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-				}
 				mem_size = memparse(from+4, &from);
-				if (*from == '@')
+				if (*from == '@') {
 					start_at = memparse(from+1, &from);
-				else {
-					start_at = HIGH_MEMORY;
-					mem_size -= HIGH_MEMORY;
-					usermem=0;
-				}
 					add_memory_region(start_at, mem_size, E820_RAM);
+				} else {
+					limit_regions(mem_size);
+					userdef=1;
+				}
 			}
 		}
 		/*
@@ -666,7 +584,7 @@ static void __init parse_mem_cmdline (char ** cmdline_p)
 	}
 	*to = '\0';
 	*cmdline_p = command_line;
-	if (usermem) {
+	if (userdef) {
 		printk(KERN_INFO "user-defined physical RAM map:\n");
 		print_memory_map("user");
 	}
@@ -678,6 +596,8 @@ void __init setup_arch(char **cmdline_p)
 	unsigned long start_pfn, max_low_pfn;
 	int i;
 
+	early_cpu_init();
+
 #ifdef CONFIG_VISWS
 	visws_get_board_type_and_rev();
 #endif
@@ -977,27 +897,6 @@ void __init setup_arch(char **cmdline_p)
 	dmi_scan_machine();
 }
 
-static int cachesize_override __initdata = -1;
-static int __init cachesize_setup(char *str)
-{
-	get_option (&str, &cachesize_override);
-	return 1;
-}
-__setup("cachesize=", cachesize_setup);
-
-
-#ifndef CONFIG_X86_TSC
-static int tsc_disable __initdata = 0;
-
-static int __init tsc_setup(char *str)
-{
-	tsc_disable = 1;
-	return 1;
-}
-
-__setup("notsc", tsc_setup);
-#endif
-
 static int __init highio_setup(char *str)
 {
 	printk("i386: disabling HIGHMEM block I/O\n");
@@ -1006,1938 +905,6 @@ static int __init highio_setup(char *str)
 }
 __setup("nohighio", highio_setup);
  
-static int __init get_model_name(struct cpuinfo_x86 *c)
-{
-	unsigned int *v;
-	char *p, *q;
-
-	if (cpuid_eax(0x80000000) < 0x80000004)
-		return 0;
-
-	v = (unsigned int *) c->x86_model_id;
-	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
-	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
-	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
-	c->x86_model_id[48] = 0;
-
-	/* Intel chips right-justify this string for some dumb reason;
-	   undo that brain damage */
-	p = q = &c->x86_model_id[0];
-	while ( *p == ' ' )
-	     p++;
-	if ( p != q ) {
-	     while ( *p )
-		  *q++ = *p++;
-	     while ( q <= &c->x86_model_id[48] )
-		  *q++ = '\0';	/* Zero-pad the rest */
-	}
-
-	return 1;
-}
-
-
-static void __init display_cacheinfo(struct cpuinfo_x86 *c)
-{
-	unsigned int n, dummy, ecx, edx, l2size;
-
-	n = cpuid_eax(0x80000000);
-
-	if (n >= 0x80000005) {
-		cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
-		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
-			edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size=(ecx>>24)+(edx>>24);	
-	}
-
-	if (n < 0x80000006)	/* Some chips just has a large L1. */
-		return;
-
-	ecx = cpuid_ecx(0x80000006);
-	l2size = ecx >> 16;
-
-	/* AMD errata T13 (order #21922) */
-	if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
-		if (c->x86_model == 3 && c->x86_mask == 0)	/* Duron Rev A0 */
-			l2size = 64;
-		if (c->x86_model == 4 &&
-			(c->x86_mask==0 || c->x86_mask==1))	/* Tbird rev A1/A2 */
-			l2size = 256;
-	}
-
-	/* Intel PIII Tualatin. This comes in two flavours.
-	 * One has 256kb of cache, the other 512. We have no way
-	 * to determine which, so we use a boottime override
-	 * for the 512kb model, and assume 256 otherwise.
-	 */
-	if ((c->x86_vendor == X86_VENDOR_INTEL) && (c->x86 == 6) &&
-		(c->x86_model == 11) && (l2size == 0))
-		l2size = 256;
-
-	/* VIA C3 CPUs (670-68F) need further shifting. */
-	if (c->x86_vendor == X86_VENDOR_CENTAUR && (c->x86 == 6) &&
-		((c->x86_model == 7) || (c->x86_model == 8))) {
-		l2size = l2size >> 8;
-	}
-
-	/* Allow user to override all this if necessary. */
-	if (cachesize_override != -1)
-		l2size = cachesize_override;
-
-	if ( l2size == 0 )
-		return;		/* Again, no L2 cache is possible */
-
-	c->x86_cache_size = l2size;
-
-	printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-	       l2size, ecx & 0xFF);
-}
-
-/*
- *	B step AMD K6 before B 9730xxxx have hardware bugs that can cause
- *	misexecution of code under Linux. Owners of such processors should
- *	contact AMD for precise details and a CPU swap.
- *
- *	See	http://www.multimania.com/poulot/k6bug.html
- *		http://www.amd.com/K6/k6docs/revgd.html
- *
- *	The following test is erm.. interesting. AMD neglected to up
- *	the chip setting when fixing the bug but they also tweaked some
- *	performance at the same time..
- */
- 
-extern void vide(void);
-__asm__(".align 4\nvide: ret");
-
-static int __init init_amd(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int mbytes = max_mapnr >> (20-PAGE_SHIFT);
-	int r;
-
-	/*
-	 *	FIXME: We should handle the K5 here. Set up the write
-	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
-	 *	no bus pipeline)
-	 */
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_bit(0*32+31, c->x86_capability);
-	
-	r = get_model_name(c);
-
-	switch(c->x86)
-	{
-		case 5:
-			if( c->x86_model < 6 )
-			{
-				/* Based on AMD doc 20734R - June 2000 */
-				if ( c->x86_model == 0 ) {
-					clear_bit(X86_FEATURE_APIC, c->x86_capability);
-					set_bit(X86_FEATURE_PGE, c->x86_capability);
-				}
-				break;
-			}
-			
-			if ( c->x86_model == 6 && c->x86_mask == 1 ) {
-				const int K6_BUG_LOOP = 1000000;
-				int n;
-				void (*f_vide)(void);
-				unsigned long d, d2;
-				
-				printk(KERN_INFO "AMD K6 stepping B detected - ");
-				
-				/*
-				 * It looks like AMD fixed the 2.6.2 bug and improved indirect 
-				 * calls at the same time.
-				 */
-
-				n = K6_BUG_LOOP;
-				f_vide = vide;
-				rdtscl(d);
-				while (n--) 
-					f_vide();
-				rdtscl(d2);
-				d = d2-d;
-				
-				/* Knock these two lines out if it debugs out ok */
-				printk(KERN_INFO "K6 BUG %ld %d (Report these if test report is incorrect)\n", d, 20*K6_BUG_LOOP);
-				printk(KERN_INFO "AMD K6 stepping B detected - ");
-				/* -- cut here -- */
-				if (d > 20*K6_BUG_LOOP) 
-					printk("system stability may be impaired when more than 32 MB are used.\n");
-				else 
-					printk("probably OK (after B9730xxxx).\n");
-				printk(KERN_INFO "Please see http://www.mygale.com/~poulot/k6bug.html\n");
-			}
-
-			/* K6 with old style WHCR */
-			if (c->x86_model < 8 ||
-			   (c->x86_model== 8 && c->x86_mask < 8)) {
-				/* We can only write allocate on the low 508Mb */
-				if(mbytes>508)
-					mbytes=508;
-
-				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0x0000FFFF)==0) {
-					unsigned long flags;
-					l=(1<<0)|((mbytes/4)<<1);
-					local_irq_save(flags);
-					wbinvd();
-					wrmsr(MSR_K6_WHCR, l, h);
-					local_irq_restore(flags);
-					printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
-						mbytes);
-				}
-				break;
-			}
-
-			if ((c->x86_model == 8 && c->x86_mask >7) ||
-			     c->x86_model == 9 || c->x86_model == 13) {
-				/* The more serious chips .. */
-
-				if(mbytes>4092)
-					mbytes=4092;
-
-				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0xFFFF0000)==0) {
-					unsigned long flags;
-					l=((mbytes>>2)<<22)|(1<<16);
-					local_irq_save(flags);
-					wbinvd();
-					wrmsr(MSR_K6_WHCR, l, h);
-					local_irq_restore(flags);
-					printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
-						mbytes);
-				}
-
-				/*  Set MTRR capability flag if appropriate */
-				if (c->x86_model == 13 || c->x86_model == 9 ||
-				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
-				break;
-			}
-			break;
-
-		case 6: /* An Athlon/Duron */
- 
-			/* Bit 15 of Athlon specific MSR 15, needs to be 0
- 			 * to enable SSE on Palomino/Morgan CPU's.
-			 * If the BIOS didn't enable it already, enable it
-			 * here.
-			 */
-			if (c->x86_model == 6 || c->x86_model == 7) {
-				if (!cpu_has(c, X86_FEATURE_XMM)) {
-					printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
-					rdmsr(MSR_K7_HWCR, l, h);
-					l &= ~0x00008000;
-					wrmsr(MSR_K7_HWCR, l, h);
-					set_bit(X86_FEATURE_XMM, c->x86_capability);
-				}
-			}
-			break;
-
-	}
-
-	display_cacheinfo(c);
-	return r;
-}
-
-/*
- * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
- */
-static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
-{
-	unsigned char ccr2, ccr3;
-	unsigned long flags;
-	
-	/* we test for DEVID by checking whether CCR3 is writable */
-	local_irq_save(flags);
-	ccr3 = getCx86(CX86_CCR3);
-	setCx86(CX86_CCR3, ccr3 ^ 0x80);
-	getCx86(0xc0);   /* dummy to change bus */
-
-	if (getCx86(CX86_CCR3) == ccr3) {       /* no DEVID regs. */
-		ccr2 = getCx86(CX86_CCR2);
-		setCx86(CX86_CCR2, ccr2 ^ 0x04);
-		getCx86(0xc0);  /* dummy */
-
-		if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
-			*dir0 = 0xfd;
-		else {                          /* Cx486S A step */
-			setCx86(CX86_CCR2, ccr2);
-			*dir0 = 0xfe;
-		}
-	}
-	else {
-		setCx86(CX86_CCR3, ccr3);  /* restore CCR3 */
-
-		/* read DIR0 and DIR1 CPU registers */
-		*dir0 = getCx86(CX86_DIR0);
-		*dir1 = getCx86(CX86_DIR1);
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
- * order to identify the Cyrix CPU model after we're out of setup.c
- *
- * Actually since bugs.h doesnt even reference this perhaps someone should
- * fix the documentation ???
- */
-static unsigned char Cx86_dir0_msb __initdata = 0;
-
-static char Cx86_model[][9] __initdata = {
-	"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
-	"M II ", "Unknown"
-};
-static char Cx486_name[][5] __initdata = {
-	"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
-	"SRx2", "DRx2"
-};
-static char Cx486S_name[][4] __initdata = {
-	"S", "S2", "Se", "S2e"
-};
-static char Cx486D_name[][4] __initdata = {
-	"DX", "DX2", "?", "?", "?", "DX4"
-};
-static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
-static char cyrix_model_mult1[] __initdata = "12??43";
-static char cyrix_model_mult2[] __initdata = "12233445";
-
-/*
- * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
- * BIOSes for compatability with DOS games.  This makes the udelay loop
- * work correctly, and improves performance.
- *
- * FIXME: our newer udelay uses the tsc. We dont need to frob with SLOP
- */
-
-extern void calibrate_delay(void) __init;
-
-static void __init check_cx686_slop(struct cpuinfo_x86 *c)
-{
-	unsigned long flags;
-
-	if (Cx86_dir0_msb == 3) {
-		unsigned char ccr3, ccr5;
-
-		local_irq_save(flags);
-		ccr3 = getCx86(CX86_CCR3);
-		setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
-		ccr5 = getCx86(CX86_CCR5);
-		if (ccr5 & 2)
-			setCx86(CX86_CCR5, ccr5 & 0xfd);  /* reset SLOP */
-		setCx86(CX86_CCR3, ccr3);		  /* disable MAPEN */
-		local_irq_restore(flags);
-
-		if (ccr5 & 2) { /* possible wrong calibration done */
-			printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n");
-			calibrate_delay();
-			c->loops_per_jiffy = loops_per_jiffy;
-		}
-	}
-}
-
-
-static void __init init_cyrix(struct cpuinfo_x86 *c)
-{
-	unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
-	char *buf = c->x86_model_id;
-	const char *p = NULL;
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_bit(0*32+31, c->x86_capability);
-
-	/* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
-	if ( test_bit(1*32+24, c->x86_capability) ) {
-		clear_bit(1*32+24, c->x86_capability);
-		set_bit(X86_FEATURE_CXMMX, c->x86_capability);
-	}
-
-	do_cyrix_devid(&dir0, &dir1);
-
-	check_cx686_slop(c);
-
-	Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
-	dir0_lsn = dir0 & 0xf;                /* model or clock multiplier */
-
-	/* common case step number/rev -- exceptions handled below */
-	c->x86_model = (dir1 >> 4) + 1;
-	c->x86_mask = dir1 & 0xf;
-
-	/* Now cook; the original recipe is by Channing Corn, from Cyrix.
-	 * We do the same thing for each generation: we work out
-	 * the model, multiplier and stepping.  Black magic included,
-	 * to make the silicon step/rev numbers match the printed ones.
-	 */
-	 
-	switch (dir0_msn) {
-		unsigned char tmp;
-
-	case 0: /* Cx486SLC/DLC/SRx/DRx */
-		p = Cx486_name[dir0_lsn & 7];
-		break;
-
-	case 1: /* Cx486S/DX/DX2/DX4 */
-		p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
-			: Cx486S_name[dir0_lsn & 3];
-		break;
-
-	case 2: /* 5x86 */
-		Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
-		p = Cx86_cb+2;
-		break;
-
-	case 3: /* 6x86/6x86L */
-		Cx86_cb[1] = ' ';
-		Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
-		if (dir1 > 0x21) { /* 686L */
-			Cx86_cb[0] = 'L';
-			p = Cx86_cb;
-			(c->x86_model)++;
-		} else             /* 686 */
-			p = Cx86_cb+1;
-		/* Emulate MTRRs using Cyrix's ARRs. */
-		set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
-		/* 6x86's contain this bug */
-		c->coma_bug = 1;
-		break;
-
-	case 4: /* MediaGX/GXm */
-#ifdef CONFIG_PCI
-		/* It isn't really a PCI quirk directly, but the cure is the
-		   same. The MediaGX has deep magic SMM stuff that handles the
-		   SB emulation. It thows away the fifo on disable_dma() which
-		   is wrong and ruins the audio. 
-
-		   Bug2: VSA1 has a wrap bug so that using maximum sized DMA 
-		   causes bad things. According to NatSemi VSA2 has another
-		   bug to do with 'hlt'. I've not seen any boards using VSA2
-		   and X doesn't seem to support it either so who cares 8).
-		   VSA1 we work around however.
-		*/
-
-		printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
-		isa_dma_bridge_buggy = 2;
-#endif		
-		c->x86_cache_size=16;	/* Yep 16K integrated cache thats it */
-
-		/* GXm supports extended cpuid levels 'ala' AMD */
-		if (c->cpuid_level == 2) {
-			/* Enable Natsemi MMX extensions */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
-
-			get_model_name(c);  /* get CPU marketing name */
-			/*
-			 *  The 5510/5520 companion chips have a funky PIT
-			 *  that breaks the TSC synchronizing, so turn it off
-			 */
-			if(pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, NULL) ||
-				pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, NULL))
-				clear_bit(X86_FEATURE_TSC, c->x86_capability);
-			return;
-		}
-		else {  /* MediaGX */
-			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
-			p = Cx86_cb+2;
-			c->x86_model = (dir1 & 0x20) ? 1 : 2;
-#ifndef CONFIG_CS5520
-			clear_bit(X86_FEATURE_TSC, c->x86_capability);
-#endif
-		}
-		break;
-
-        case 5: /* 6x86MX/M II */
-		if (dir1 > 7)
-		{
-			dir0_msn++;  /* M II */
-			/* Enable MMX extensions (App note 108) */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
-		}
-		else
-		{
-			c->coma_bug = 1;      /* 6x86MX, it has the bug. */
-		}
-		tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
-		Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
-		p = Cx86_cb+tmp;
-	 	if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
-			(c->x86_model)++;
-		/* Emulate MTRRs using Cyrix's ARRs. */
-		set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
-		break;
-
-	case 0xf:  /* Cyrix 486 without DEVID registers */
-		switch (dir0_lsn) {
-		case 0xd:  /* either a 486SLC or DLC w/o DEVID */
-			dir0_msn = 0;
-			p = Cx486_name[(c->hard_math) ? 1 : 0];
-			break;
-
-		case 0xe:  /* a 486S A step */
-			dir0_msn = 0;
-			p = Cx486S_name[0];
-			break;
-		}
-		break;
-
-	default:  /* unknown (shouldn't happen, we know everyone ;-) */
-		dir0_msn = 7;
-		break;
-	}
-	strcpy(buf, Cx86_model[dir0_msn & 7]);
-	if (p) strcat(buf, p);
-	return;
-}
-
-#ifdef CONFIG_X86_OOSTORE
-
-static u32 __init power2(u32 x)
-{
-	u32 s=1;
-	while(s<=x)
-		s<<=1;
-	return s>>=1;
-}
-
-/*
- *	Set up an actual MCR
- */
- 
-static void __init winchip_mcr_insert(int reg, u32 base, u32 size, int key)
-{
-	u32 lo, hi;
-	
-	hi = base & ~0xFFF;
-	lo = ~(size-1);		/* Size is a power of 2 so this makes a mask */
-	lo &= ~0xFFF;		/* Remove the ctrl value bits */
-	lo |= key;		/* Attribute we wish to set */
-	wrmsr(reg+MSR_IDT_MCR0, lo, hi);
-	mtrr_centaur_report_mcr(reg, lo, hi);	/* Tell the mtrr driver */
-}
-
-/*
- *	Figure what we can cover with MCR's
- *
- *	Shortcut: We know you can't put 4Gig of RAM on a winchip
- */
-
-static u32 __init ramtop(void)		/* 16388 */
-{
-	int i;
-	u32 top = 0;
-	u32 clip = 0xFFFFFFFFUL;
-	
-	for (i = 0; i < e820.nr_map; i++) {
-		unsigned long start, end;
-
-		if (e820.map[i].addr > 0xFFFFFFFFUL)
-			continue;
-		/*
-		 *	Don't MCR over reserved space. Ignore the ISA hole
-		 *	we frob around that catastrophy already
-		 */
-		 			
-		if (e820.map[i].type == E820_RESERVED)
-		{
-			if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
-				clip = e820.map[i].addr;
-			continue;
-		}
-		start = e820.map[i].addr;
-		end = e820.map[i].addr + e820.map[i].size;
-		if (start >= end)
-			continue;
-		if (end > top)
-			top = end;
-	}
-	/* Everything below 'top' should be RAM except for the ISA hole.
-	   Because of the limited MCR's we want to map NV/ACPI into our
-	   MCR range for gunk in RAM 
-	   
-	   Clip might cause us to MCR insufficient RAM but that is an
-	   acceptable failure mode and should only bite obscure boxes with
-	   a VESA hole at 15Mb
-	   
-	   The second case Clip sometimes kicks in is when the EBDA is marked
-	   as reserved. Again we fail safe with reasonable results
-	*/
-	
-	if(top>clip)
-		top=clip;
-		
-	return top;
-}
-
-/*
- *	Compute a set of MCR's to give maximum coverage
- */
-
-static int __init winchip_mcr_compute(int nr, int key)
-{
-	u32 mem = ramtop();
-	u32 root = power2(mem);
-	u32 base = root;
-	u32 top = root;
-	u32 floor = 0;
-	int ct = 0;
-	
-	while(ct<nr)
-	{
-		u32 fspace = 0;
-
-		/*
-		 *	Find the largest block we will fill going upwards
-		 */
-
-		u32 high = power2(mem-top);	
-
-		/*
-		 *	Find the largest block we will fill going downwards
-		 */
-
-		u32 low = base/2;
-
-		/*
-		 *	Don't fill below 1Mb going downwards as there
-		 *	is an ISA hole in the way.
-		 */		
-		 
-		if(base <= 1024*1024)
-			low = 0;
-			
-		/*
-		 *	See how much space we could cover by filling below
-		 *	the ISA hole
-		 */
-		 
-		if(floor == 0)
-			fspace = 512*1024;
-		else if(floor ==512*1024)
-			fspace = 128*1024;
-
-		/* And forget ROM space */
-		
-		/*
-		 *	Now install the largest coverage we get
-		 */
-		 
-		if(fspace > high && fspace > low)
-		{
-			winchip_mcr_insert(ct, floor, fspace, key);
-			floor += fspace;
-		}
-		else if(high > low)
-		{
-			winchip_mcr_insert(ct, top, high, key);
-			top += high;
-		}
-		else if(low > 0)
-		{
-			base -= low;
-			winchip_mcr_insert(ct, base, low, key);
-		}
-		else break;
-		ct++;
-	}
-	/*
-	 *	We loaded ct values. We now need to set the mask. The caller
-	 *	must do this bit.
-	 */
-	 
-	return ct;
-}
-
-static void __init winchip_create_optimal_mcr(void)
-{
-	int i;
-	/*
-	 *	Allocate up to 6 mcrs to mark as much of ram as possible
-	 *	as write combining and weak write ordered.
-	 *
-	 *	To experiment with: Linux never uses stack operations for 
-	 *	mmio spaces so we could globally enable stack operation wc
-	 *
-	 *	Load the registers with type 31 - full write combining, all
-	 *	writes weakly ordered.
-	 */
-	int used = winchip_mcr_compute(6, 31);
-
-	/*
-	 *	Wipe unused MCRs
-	 */
-	 
-	for(i=used;i<8;i++)
-		wrmsr(MSR_IDT_MCR0+i, 0, 0);
-}
-
-static void __init winchip2_create_optimal_mcr(void)
-{
-	u32 lo, hi;
-	int i;
-
-	/*
-	 *	Allocate up to 6 mcrs to mark as much of ram as possible
-	 *	as write combining, weak store ordered.
-	 *
-	 *	Load the registers with type 25
-	 *		8	-	weak write ordering
-	 *		16	-	weak read ordering
-	 *		1	-	write combining
-	 */
-
-	int used = winchip_mcr_compute(6, 25);
-	
-	/*
-	 *	Mark the registers we are using.
-	 */
-	 
-	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	for(i=0;i<used;i++)
-		lo|=1<<(9+i);
-	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	
-	/*
-	 *	Wipe unused MCRs
-	 */
-	 
-	for(i=used;i<8;i++)
-		wrmsr(MSR_IDT_MCR0+i, 0, 0);
-}
-
-/*
- *	Handle the MCR key on the Winchip 2.
- */
-
-static void __init winchip2_unprotect_mcr(void)
-{
-	u32 lo, hi;
-	u32 key;
-	
-	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	lo&=~0x1C0;	/* blank bits 8-6 */
-	key = (lo>>17) & 7;
-	lo |= key<<6;	/* replace with unlock key */
-	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-}
-
-static void __init winchip2_protect_mcr(void)
-{
-	u32 lo, hi;
-	
-	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	lo&=~0x1C0;	/* blank bits 8-6 */
-	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-}
-	
-#endif
-
-static void __init init_centaur(struct cpuinfo_x86 *c)
-{
-	enum {
-		ECX8=1<<1,
-		EIERRINT=1<<2,
-		DPM=1<<3,
-		DMCE=1<<4,
-		DSTPCLK=1<<5,
-		ELINEAR=1<<6,
-		DSMC=1<<7,
-		DTLOCK=1<<8,
-		EDCTLB=1<<8,
-		EMMX=1<<9,
-		DPDC=1<<11,
-		EBRPRED=1<<12,
-		DIC=1<<13,
-		DDC=1<<14,
-		DNA=1<<15,
-		ERETSTK=1<<16,
-		E2MMX=1<<19,
-		EAMD3D=1<<20,
-	};
-
-	char *name;
-	u32  fcr_set=0;
-	u32  fcr_clr=0;
-	u32  lo,hi,newlo;
-	u32  aa,bb,cc,dd;
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_bit(0*32+31, c->x86_capability);
-
-	switch (c->x86) {
-
-		case 5:
-			switch(c->x86_model) {
-			case 4:
-				name="C6";
-				fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
-				fcr_clr=DPDC;
-				printk(KERN_NOTICE "Disabling bugged TSC.\n");
-				clear_bit(X86_FEATURE_TSC, c->x86_capability);
-#ifdef CONFIG_X86_OOSTORE
-				winchip_create_optimal_mcr();
-				/* Enable
-					write combining on non-stack, non-string
-					write combining on string, all types
-					weak write ordering 
-					
-				   The C6 original lacks weak read order 
-				   
-				   Note 0x120 is write only on Winchip 1 */
-				   
-				wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
-#endif				
-				break;
-			case 8:
-				switch(c->x86_mask) {
-				default:
-					name="2";
-					break;
-				case 7 ... 9:
-					name="2A";
-					break;
-				case 10 ... 15:
-					name="2B";
-					break;
-				}
-				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
-				fcr_clr=DPDC;
-#ifdef CONFIG_X86_OOSTORE
-				winchip2_unprotect_mcr();
-				winchip2_create_optimal_mcr();
-				rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-				/* Enable
-					write combining on non-stack, non-string
-					write combining on string, all types
-					weak write ordering 
-				*/
-				lo|=31;				
-				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-				winchip2_protect_mcr();
-#endif
-				break;
-			case 9:
-				name="3";
-				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
-				fcr_clr=DPDC;
-#ifdef CONFIG_X86_OOSTORE
-				winchip2_unprotect_mcr();
-				winchip2_create_optimal_mcr();
-				rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-				/* Enable
-					write combining on non-stack, non-string
-					write combining on string, all types
-					weak write ordering 
-				*/
-				lo|=31;				
-				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-				winchip2_protect_mcr();
-#endif
-				break;
-			case 10:
-				name="4";
-				/* no info on the WC4 yet */
-				break;
-			default:
-				name="??";
-			}
-
-			rdmsr(MSR_IDT_FCR1, lo, hi);
-			newlo=(lo|fcr_set) & (~fcr_clr);
-
-			if (newlo!=lo) {
-				printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
-				wrmsr(MSR_IDT_FCR1, newlo, hi );
-			} else {
-				printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
-			}
-			/* Emulate MTRRs using Centaur's MCR. */
-			set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
-			/* Report CX8 */
-			set_bit(X86_FEATURE_CX8, c->x86_capability);
-			/* Set 3DNow! on Winchip 2 and above. */
-			if (c->x86_model >=8)
-				set_bit(X86_FEATURE_3DNOW, c->x86_capability);
-			/* See if we can find out some more. */
-			if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
-				/* Yes, we can. */
-				cpuid(0x80000005,&aa,&bb,&cc,&dd);
-				/* Add L1 data and code cache sizes. */
-				c->x86_cache_size = (cc>>24)+(dd>>24);
-			}
-			sprintf( c->x86_model_id, "WinChip %s", name );
-			break;
-
-		case 6:
-			switch (c->x86_model) {
-				case 6 ... 8:		/* Cyrix III family */
-					rdmsr (MSR_VIA_FCR, lo, hi);
-					lo |= (1<<1 | 1<<7);	/* Report CX8 & enable PGE */
-					wrmsr (MSR_VIA_FCR, lo, hi);
-
-					set_bit(X86_FEATURE_CX8, c->x86_capability);
-					set_bit(X86_FEATURE_3DNOW, c->x86_capability);
-
-					get_model_name(c);
-					display_cacheinfo(c);
-					break;
-			}
-			break;
-	}
-}
-
-
-static void __init init_transmeta(struct cpuinfo_x86 *c)
-{
-	unsigned int cap_mask, uk, max, dummy;
-	unsigned int cms_rev1, cms_rev2;
-	unsigned int cpu_rev, cpu_freq, cpu_flags;
-	char cpu_info[65];
-
-	get_model_name(c);	/* Same as AMD/Cyrix */
-	display_cacheinfo(c);
-
-	/* Print CMS and CPU revision */
-	max = cpuid_eax(0x80860000);
-	if ( max >= 0x80860001 ) {
-		cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags); 
-		printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
-		       (cpu_rev >> 24) & 0xff,
-		       (cpu_rev >> 16) & 0xff,
-		       (cpu_rev >> 8) & 0xff,
-		       cpu_rev & 0xff,
-		       cpu_freq);
-	}
-	if ( max >= 0x80860002 ) {
-		cpuid(0x80860002, &dummy, &cms_rev1, &cms_rev2, &dummy);
-		printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
-		       (cms_rev1 >> 24) & 0xff,
-		       (cms_rev1 >> 16) & 0xff,
-		       (cms_rev1 >> 8) & 0xff,
-		       cms_rev1 & 0xff,
-		       cms_rev2);
-	}
-	if ( max >= 0x80860006 ) {
-		cpuid(0x80860003,
-		      (void *)&cpu_info[0],
-		      (void *)&cpu_info[4],
-		      (void *)&cpu_info[8],
-		      (void *)&cpu_info[12]);
-		cpuid(0x80860004,
-		      (void *)&cpu_info[16],
-		      (void *)&cpu_info[20],
-		      (void *)&cpu_info[24],
-		      (void *)&cpu_info[28]);
-		cpuid(0x80860005,
-		      (void *)&cpu_info[32],
-		      (void *)&cpu_info[36],
-		      (void *)&cpu_info[40],
-		      (void *)&cpu_info[44]);
-		cpuid(0x80860006,
-		      (void *)&cpu_info[48],
-		      (void *)&cpu_info[52],
-		      (void *)&cpu_info[56],
-		      (void *)&cpu_info[60]);
-		cpu_info[64] = '\0';
-		printk(KERN_INFO "CPU: %s\n", cpu_info);
-	}
-
-	/* Unhide possibly hidden capability flags */
-	rdmsr(0x80860004, cap_mask, uk);
-	wrmsr(0x80860004, ~0, uk);
-	c->x86_capability[0] = cpuid_edx(0x00000001);
-	wrmsr(0x80860004, cap_mask, uk);
-}
-
-
-static void __init init_rise(struct cpuinfo_x86 *c)
-{
-	printk("CPU: Rise iDragon");
-	if (c->x86_model > 2)
-		printk(" II");
-	printk("\n");
-
-	/* Unhide possibly hidden capability flags
-	   The mp6 iDragon family don't have MSRs.
-	   We switch on extra features with this cpuid weirdness: */
-	__asm__ (
-		"movl $0x6363452a, %%eax\n\t"
-		"movl $0x3231206c, %%ecx\n\t"
-		"movl $0x2a32313a, %%edx\n\t"
-		"cpuid\n\t"
-		"movl $0x63634523, %%eax\n\t"
-		"movl $0x32315f6c, %%ecx\n\t"
-		"movl $0x2333313a, %%edx\n\t"
-		"cpuid\n\t" : : : "eax", "ebx", "ecx", "edx"
-	);
-	set_bit(X86_FEATURE_CX8, c->x86_capability);
-}
-
-
-extern void trap_init_f00f_bug(void);
-
-static void __init init_intel(struct cpuinfo_x86 *c)
-{
-	char *p = NULL;
-	unsigned int l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
-
-#ifdef CONFIG_X86_F00F_BUG
-	/*
-	 * All current models of Pentium and Pentium with MMX technology CPUs
-	 * have the F0 0F bug, which lets nonpriviledged users lock up the system.
-	 * Note that the workaround only should be initialized once...
-	 */
-	c->f00f_bug = 0;
-	if ( c->x86 == 5 ) {
-		static int f00f_workaround_enabled = 0;
-
-		c->f00f_bug = 1;
-		if ( !f00f_workaround_enabled ) {
-			trap_init_f00f_bug();
-			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
-			f00f_workaround_enabled = 1;
-		}
-	}
-#endif
-
-
-	if (c->cpuid_level > 1) {
-		/* supports eax=2  call */
-		int i, j, n;
-		int regs[4];
-		unsigned char *dp = (unsigned char *)regs;
-
-		/* Number of times to iterate */
-		n = cpuid_eax(2) & 0xFF;
-
-		for ( i = 0 ; i < n ; i++ ) {
-			cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
-			
-			/* If bit 31 is set, this is an unknown format */
-			for ( j = 0 ; j < 3 ; j++ ) {
-				if ( regs[j] < 0 ) regs[j] = 0;
-			}
-
-			/* Byte 0 is level count, not a descriptor */
-			for ( j = 1 ; j < 16 ; j++ ) {
-				unsigned char des = dp[j];
-				unsigned char dl, dh;
-				unsigned int cs;
-
-				dh = des >> 4;
-				dl = des & 0x0F;
-
-				/* Black magic... */
-
-				switch ( dh )
-				{
-				case 0:
-					switch ( dl ) {
-					case 6:
-						/* L1 I cache */
-						l1i += 8;
-						break;
-					case 8:
-						/* L1 I cache */
-						l1i += 16;
-						break;
-					case 10:
-						/* L1 D cache */
-						l1d += 8;
-						break;
-					case 12:
-						/* L1 D cache */
-						l1d += 16;
-						break;
-					default:;
-						/* TLB, or unknown */
-					}
-					break;
-				case 2:
-					if ( dl ) {
-						/* L3 cache */
-						cs = (dl-1) << 9;
-						l3 += cs;
-					}
-					break;
-				case 4:
-					if ( c->x86 > 6 && dl ) {
-						/* P4 family */
-						/* L3 cache */
-						cs = 128 << (dl-1);
-						l3 += cs;
-						break;
-					}
-					/* else same as 8 - fall through */
-				case 8:
-					if ( dl ) {
-						/* L2 cache */
-						cs = 128 << (dl-1);
-						l2 += cs;
-					}
-					break;
-				case 6:
-					if (dl > 5) {
-						/* L1 D cache */
-						cs = 8<<(dl-6);
-						l1d += cs;
-					}
-					break;
-				case 7:
-					if ( dl >= 8 ) 
-					{
-						/* L2 cache */
-						cs = 64<<(dl-8);
-						l2 += cs;
-					} else {
-						/* L0 I cache, count as L1 */
-						cs = dl ? (16 << (dl-1)) : 12;
-						l1i += cs;
-					}
-					break;
-				default:
-					/* TLB, or something else we don't know about */
-					break;
-				}
-			}
-		}
-		if ( l1i || l1d )
-			printk(KERN_INFO "CPU: L1 I cache: %dK, L1 D cache: %dK\n",
-			      l1i, l1d);
-		if ( l2 )
-			printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
-		if ( l3 )
-			printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
-
-		/*
-		 * This assumes the L3 cache is shared; it typically lives in
-		 * the northbridge.  The L1 caches are included by the L2
-		 * cache, and so should not be included for the purpose of
-		 * SMP switching weights.
-		 */
-		c->x86_cache_size = l2 ? l2 : (l1i+l1d);
-	}
-
-	/* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it */
-	if ( c->x86 == 6 && c->x86_model < 3 && c->x86_mask < 3 )
-		clear_bit(X86_FEATURE_SEP, c->x86_capability);
-	
-	/* Names for the Pentium II/Celeron processors 
-	   detectable only by also checking the cache size.
-	   Dixon is NOT a Celeron. */
-	if (c->x86 == 6) {
-		switch (c->x86_model) {
-		case 5:
-			if (l2 == 0)
-				p = "Celeron (Covington)";
-			if (l2 == 256)
-				p = "Mobile Pentium II (Dixon)";
-			break;
-			
-		case 6:
-			if (l2 == 128)
-				p = "Celeron (Mendocino)";
-			break;
-			
-		case 8:
-			if (l2 == 128)
-				p = "Celeron (Coppermine)";
-			break;
-		}
-	}
-
-	if ( p )
-		strcpy(c->x86_model_id, p);
-	
-#ifdef CONFIG_SMP
-	if (cpu_has(c, X86_FEATURE_HT)) {
-		extern	int phys_proc_id[NR_CPUS];
-		
-		u32 	eax, ebx, ecx, edx;
-		int 	index_lsb, index_msb, tmp;
-		int	initial_apic_id;
-		int 	cpu = smp_processor_id();
-
-		cpuid(1, &eax, &ebx, &ecx, &edx);
-		smp_num_siblings = (ebx & 0xff0000) >> 16;
-
-		if (smp_num_siblings == 1) {
-			printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-		} else if (smp_num_siblings > 1 ) {
-			index_lsb = 0;
-			index_msb = 31;
-			/*
-			 * At this point we only support two siblings per
-			 * processor package.
-			 */
-#define NR_SIBLINGS	2
-			if (smp_num_siblings != NR_SIBLINGS) {
-				printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
-				smp_num_siblings = 1;
-				goto too_many_siblings;
-			}
-			tmp = smp_num_siblings;
-			while ((tmp & 1) == 0) {
-				tmp >>=1 ;
-				index_lsb++;
-			}
-			tmp = smp_num_siblings;
-			while ((tmp & 0x80000000 ) == 0) {
-				tmp <<=1 ;
-				index_msb--;
-			}
-			if (index_lsb != index_msb )
-				index_msb++;
-			initial_apic_id = ebx >> 24 & 0xff;
-			phys_proc_id[cpu] = initial_apic_id >> index_msb;
-
-			printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-                               phys_proc_id[cpu]);
-		}
-
-	}
-too_many_siblings:
-#endif
-}
-
-void __init get_cpu_vendor(struct cpuinfo_x86 *c)
-{
-	char *v = c->x86_vendor_id;
-
-	if (!strcmp(v, "GenuineIntel"))
-		c->x86_vendor = X86_VENDOR_INTEL;
-	else if (!strcmp(v, "AuthenticAMD"))
-		c->x86_vendor = X86_VENDOR_AMD;
-	else if (!strcmp(v, "CyrixInstead"))
-		c->x86_vendor = X86_VENDOR_CYRIX;
-	else if (!strcmp(v, "Geode by NSC"))
-		c->x86_vendor = X86_VENDOR_NSC;
-	else if (!strcmp(v, "UMC UMC UMC "))
-		c->x86_vendor = X86_VENDOR_UMC;
-	else if (!strcmp(v, "CentaurHauls"))
-		c->x86_vendor = X86_VENDOR_CENTAUR;
-	else if (!strcmp(v, "NexGenDriven"))
-		c->x86_vendor = X86_VENDOR_NEXGEN;
-	else if (!strcmp(v, "RiseRiseRise"))
-		c->x86_vendor = X86_VENDOR_RISE;
-	else if (!strcmp(v, "GenuineTMx86") ||
-		 !strcmp(v, "TransmetaCPU"))
-		c->x86_vendor = X86_VENDOR_TRANSMETA;
-	else
-		c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-struct cpu_model_info {
-	int vendor;
-	int family;
-	char *model_names[16];
-};
-
-/* Naming convention should be: <Name> [(<Codename>)] */
-/* This table only is used unless init_<vendor>() below doesn't set it; */
-/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
-static struct cpu_model_info cpu_models[] __initdata = {
-	{ X86_VENDOR_INTEL,	4,
-	  { "486 DX-25/33", "486 DX-50", "486 SX", "486 DX/2", "486 SL", 
-	    "486 SX/2", NULL, "486 DX/2-WB", "486 DX/4", "486 DX/4-WB", NULL, 
-	    NULL, NULL, NULL, NULL, NULL }},
-	{ X86_VENDOR_INTEL,	5,
-	  { "Pentium 60/66 A-step", "Pentium 60/66", "Pentium 75 - 200",
-	    "OverDrive PODP5V83", "Pentium MMX", NULL, NULL,
-	    "Mobile Pentium 75 - 200", "Mobile Pentium MMX", NULL, NULL, NULL,
-	    NULL, NULL, NULL, NULL }},
-	{ X86_VENDOR_INTEL,	6,
-	  { "Pentium Pro A-step", "Pentium Pro", NULL, "Pentium II (Klamath)", 
-	    NULL, "Pentium II (Deschutes)", "Mobile Pentium II",
-	    "Pentium III (Katmai)", "Pentium III (Coppermine)", NULL,
-	    "Pentium III (Cascades)", NULL, NULL, NULL, NULL }},
-	{ X86_VENDOR_AMD,	4,
-	  { NULL, NULL, NULL, "486 DX/2", NULL, NULL, NULL, "486 DX/2-WB",
-	    "486 DX/4", "486 DX/4-WB", NULL, NULL, NULL, NULL, "Am5x86-WT",
-	    "Am5x86-WB" }},
-	{ X86_VENDOR_AMD,	5, /* Is this this really necessary?? */
-	  { "K5/SSA5", "K5",
-	    "K5", "K5", NULL, NULL,
-	    "K6", "K6", "K6-2",
-	    "K6-3", NULL, NULL, NULL, NULL, NULL, NULL }},
-	{ X86_VENDOR_AMD,	6, /* Is this this really necessary?? */
-	  { "Athlon", "Athlon",
-	    "Athlon", NULL, "Athlon", NULL,
-	    NULL, NULL, NULL,
-	    NULL, NULL, NULL, NULL, NULL, NULL, NULL }},
-	{ X86_VENDOR_UMC,	4,
-	  { NULL, "U5D", "U5S", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	    NULL, NULL, NULL, NULL, NULL, NULL }},
-	{ X86_VENDOR_NEXGEN,	5,
-	  { "Nx586", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	    NULL, NULL, NULL, NULL, NULL, NULL, NULL }},
-	{ X86_VENDOR_RISE,	5,
-	  { "iDragon", NULL, "iDragon", NULL, NULL, NULL, NULL,
-	    NULL, "iDragon II", "iDragon II", NULL, NULL, NULL, NULL, NULL, NULL }},
-};
-
-/* Look up CPU names by table lookup. */
-static char __init *table_lookup_model(struct cpuinfo_x86 *c)
-{
-	struct cpu_model_info *info = cpu_models;
-	int i;
-
-	if ( c->x86_model >= 16 )
-		return NULL;	/* Range check */
-
-	for ( i = 0 ; i < sizeof(cpu_models)/sizeof(struct cpu_model_info) ; i++ ) {
-		if ( info->vendor == c->x86_vendor &&
-		     info->family == c->x86 ) {
-			return info->model_names[c->x86_model];
-		}
-		info++;
-	}
-	return NULL;		/* Not found */
-}
-
-/*
- *	Detect a NexGen CPU running without BIOS hypercode new enough
- *	to have CPUID. (Thanks to Herbert Oppmann)
- */
- 
-static int __init deep_magic_nexgen_probe(void)
-{
-	int ret;
-	
-	__asm__ __volatile__ (
-		"	movw	$0x5555, %%ax\n"
-		"	xorw	%%dx,%%dx\n"
-		"	movw	$2, %%cx\n"
-		"	divw	%%cx\n"
-		"	movl	$0, %%eax\n"
-		"	jnz	1f\n"
-		"	movl	$1, %%eax\n"
-		"1:\n" 
-		: "=a" (ret) : : "cx", "dx" );
-	return  ret;
-}
-
-static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
-{
-	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
-		/* Disable processor serial number */
-		unsigned long lo,hi;
-		rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
-		lo |= 0x200000;
-		wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
-		printk(KERN_NOTICE "CPU serial number disabled.\n");
-		clear_bit(X86_FEATURE_PN, c->x86_capability);
-
-		/* Disabling the serial number may affect the cpuid level */
-		c->cpuid_level = cpuid_eax(0);
-	}
-}
-
-
-static int __init x86_serial_nr_setup(char *s)
-{
-	disable_x86_serial_nr = 0;
-	return 1;
-}
-__setup("serialnumber", x86_serial_nr_setup);
-
-static int __init x86_fxsr_setup(char * s)
-{
-	disable_x86_fxsr = 1;
-	return 1;
-}
-__setup("nofxsr", x86_fxsr_setup);
-
-
-/* Standard macro to see if a specific flag is changeable */
-static inline int flag_is_changeable_p(u32 flag)
-{
-	u32 f1, f2;
-
-	asm("pushfl\n\t"
-	    "pushfl\n\t"
-	    "popl %0\n\t"
-	    "movl %0,%1\n\t"
-	    "xorl %2,%0\n\t"
-	    "pushl %0\n\t"
-	    "popfl\n\t"
-	    "pushfl\n\t"
-	    "popl %0\n\t"
-	    "popfl\n\t"
-	    : "=&r" (f1), "=&r" (f2)
-	    : "ir" (flag));
-
-	return ((f1^f2) & flag) != 0;
-}
-
-
-/* Probe for the CPUID instruction */
-static int __init have_cpuid_p(void)
-{
-	return flag_is_changeable_p(X86_EFLAGS_ID);
-}
-
-/*
- * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
- * by the fact that they preserve the flags across the division of 5/2.
- * PII and PPro exhibit this behavior too, but they have cpuid available.
- */
- 
-/*
- * Perform the Cyrix 5/2 test. A Cyrix won't change
- * the flags, while other 486 chips will.
- */
-static inline int test_cyrix_52div(void)
-{
-	unsigned int test;
-
-	__asm__ __volatile__(
-	     "sahf\n\t"		/* clear flags (%eax = 0x0005) */
-	     "div %b2\n\t"	/* divide 5 by 2 */
-	     "lahf"		/* store flags into %ah */
-	     : "=a" (test)
-	     : "0" (5), "q" (2)
-	     : "cc");
-
-	/* AH is 0x02 on Cyrix after the divide.. */
-	return (unsigned char) (test >> 8) == 0x02;
-}
-
-/* Try to detect a CPU with disabled CPUID, and if so, enable.  This routine
-   may also be used to detect non-CPUID processors and fill in some of
-   the information manually. */
-static int __init id_and_try_enable_cpuid(struct cpuinfo_x86 *c)
-{
-	/* First of all, decide if this is a 486 or higher */
-	/* It's a 486 if we can modify the AC flag */
-	if ( flag_is_changeable_p(X86_EFLAGS_AC) )
-		c->x86 = 4;
-	else
-		c->x86 = 3;
-
-	/* Detect Cyrix with disabled CPUID */
-	if ( c->x86 == 4 && test_cyrix_52div() ) {
-		unsigned char dir0, dir1;
-		
-		strcpy(c->x86_vendor_id, "CyrixInstead");
-	        c->x86_vendor = X86_VENDOR_CYRIX;
-	        
-	        /* Actually enable cpuid on the older cyrix */
-	    
-	    	/* Retrieve CPU revisions */
-	    	
-		do_cyrix_devid(&dir0, &dir1);
-
-		dir0>>=4;		
-		
-		/* Check it is an affected model */
-		
-   	        if (dir0 == 5 || dir0 == 3)
-   	        {
-			unsigned char ccr3, ccr4;
-			unsigned long flags;
-			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
-			local_irq_save(flags);
-			ccr3 = getCx86(CX86_CCR3);
-			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
-			ccr4 = getCx86(CX86_CCR4);
-			setCx86(CX86_CCR4, ccr4 | 0x80);          /* enable cpuid  */
-			setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
-			local_irq_restore(flags);
-		}
-	} else
-
-	/* Detect NexGen with old hypercode */
-	if ( deep_magic_nexgen_probe() ) {
-		strcpy(c->x86_vendor_id, "NexGenDriven");
-	}
-
-	return have_cpuid_p();	/* Check to see if CPUID now enabled? */
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-void __init identify_cpu(struct cpuinfo_x86 *c)
-{
-	int junk, i;
-	u32 xlvl, tfms;
-
-	c->loops_per_jiffy = loops_per_jiffy;
-	c->x86_cache_size = -1;
-	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->cpuid_level = -1;	/* CPUID not detected */
-	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
-	c->x86_vendor_id[0] = '\0'; /* Unset */
-	c->x86_model_id[0] = '\0';  /* Unset */
-	memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
-	if ( !have_cpuid_p() && !id_and_try_enable_cpuid(c) ) {
-		/* CPU doesn't have CPUID */
-
-		/* If there are any capabilities, they're vendor-specific */
-		/* enable_cpuid() would have set c->x86 for us. */
-	} else {
-		/* CPU does have CPUID */
-
-		/* Get vendor name */
-		cpuid(0x00000000, &c->cpuid_level,
-		      (int *)&c->x86_vendor_id[0],
-		      (int *)&c->x86_vendor_id[8],
-		      (int *)&c->x86_vendor_id[4]);
-		
-		get_cpu_vendor(c);
-		/* Initialize the standard set of capabilities */
-		/* Note that the vendor-specific code below might override */
-
-		/* Intel-defined flags: level 0x00000001 */
-		if ( c->cpuid_level >= 0x00000001 ) {
-			u32 capability;
-			cpuid(0x00000001, &tfms, &junk, &junk, &capability);
-			c->x86_capability[0] = capability;
-			c->x86 = (tfms >> 8) & 15;
-			c->x86_model = (tfms >> 4) & 15;
-			c->x86_mask = tfms & 15;
-		} else {
-			/* Have CPUID level 0 only - unheard of */
-			c->x86 = 4;
-		}
-
-		/* AMD-defined flags: level 0x80000001 */
-		xlvl = cpuid_eax(0x80000000);
-		if ( (xlvl & 0xffff0000) == 0x80000000 ) {
-			if ( xlvl >= 0x80000001 )
-				c->x86_capability[1] = cpuid_edx(0x80000001);
-			if ( xlvl >= 0x80000004 )
-				get_model_name(c); /* Default name */
-		}
-
-		/* Transmeta-defined flags: level 0x80860001 */
-		xlvl = cpuid_eax(0x80860000);
-		if ( (xlvl & 0xffff0000) == 0x80860000 ) {
-			if (  xlvl >= 0x80860001 )
-				c->x86_capability[2] = cpuid_edx(0x80860001);
-		}
-	}
-
-	printk(KERN_DEBUG "CPU: Before vendor init, caps: %08lx %08lx %08lx, vendor = %d\n",
-	       c->x86_capability[0],
-	       c->x86_capability[1],
-	       c->x86_capability[2],
-	       c->x86_vendor);
-
-	/*
-	 * Vendor-specific initialization.  In this section we
-	 * canonicalize the feature flags, meaning if there are
-	 * features a certain CPU supports which CPUID doesn't
-	 * tell us, CPUID claiming incorrect flags, or other bugs,
-	 * we handle them here.
-	 *
-	 * At the end of this section, c->x86_capability better
-	 * indicate the features this CPU genuinely supports!
-	 */
-	switch ( c->x86_vendor ) {
-	case X86_VENDOR_AMD:
-		init_amd(c);
-		break;
-
-	case X86_VENDOR_CENTAUR:
-		init_centaur(c);
-		break;
-
-	case X86_VENDOR_CYRIX:
-		init_cyrix(c);
-		break;
-
-	case X86_VENDOR_INTEL:
-		init_intel(c);
-		break;
-
-	case X86_VENDOR_NEXGEN:
-		c->x86_cache_size = 256; /* A few had 1 MB... */
-		break;
-
-	case X86_VENDOR_NSC:
-        init_cyrix(c);
-		break;
-
-	case X86_VENDOR_RISE:
-		init_rise(c);
-		break;
-
-	case X86_VENDOR_TRANSMETA:
-		init_transmeta(c);
-		break;
-
-	case X86_VENDOR_UNKNOWN:
-	default:
-		/* Not much we can do here... */
-		/* Check if at least it has cpuid */
-		if (c->cpuid_level == -1)
-		{
-			/* No cpuid. It must be an ancient CPU */
-			if (c->x86 == 4)
-				strcpy(c->x86_model_id, "486");
-			else if (c->x86 == 3)
-				strcpy(c->x86_model_id, "386");
-		}
-		break;
-
-	}
-
-	printk(KERN_DEBUG "CPU: After vendor init, caps: %08lx %08lx %08lx %08lx\n",
-	       c->x86_capability[0],
-	       c->x86_capability[1],
-	       c->x86_capability[2],
-	       c->x86_capability[3]);
-
-	/*
-	 * The vendor-specific functions might have changed features.  Now
-	 * we do "generic changes."
-	 */
-
-	/* TSC disabled? */
-#ifndef CONFIG_X86_TSC
-	if ( tsc_disable )
-		clear_bit(X86_FEATURE_TSC, c->x86_capability);
-#endif
-
-	/* FXSR disabled? */
-	if (disable_x86_fxsr) {
-		clear_bit(X86_FEATURE_FXSR, c->x86_capability);
-		clear_bit(X86_FEATURE_XMM, c->x86_capability);
-	}
-
-	/* Disable the PN if appropriate */
-	squash_the_stupid_serial_number(c);
-
-	/* Init Machine Check Exception if available. */
-	mcheck_init(c);
-
-	/* If the model name is still unset, do table lookup. */
-	if ( !c->x86_model_id[0] ) {
-		char *p;
-		p = table_lookup_model(c);
-		if ( p )
-			strcpy(c->x86_model_id, p);
-		else
-			/* Last resort... */
-			sprintf(c->x86_model_id, "%02x/%02x",
-				c->x86_vendor, c->x86_model);
-	}
-
-	/* Now the feature flags better reflect actual CPU features! */
-
-	printk(KERN_DEBUG "CPU:     After generic, caps: %08lx %08lx %08lx %08lx\n",
-	       c->x86_capability[0],
-	       c->x86_capability[1],
-	       c->x86_capability[2],
-	       c->x86_capability[3]);
-
-	/*
-	 * On SMP, boot_cpu_data holds the common feature set between
-	 * all CPUs; so make sure that we indicate which features are
-	 * common between the CPUs.  The first time this routine gets
-	 * executed, c == &boot_cpu_data.
-	 */
-	if ( c != &boot_cpu_data ) {
-		/* AND the already accumulated flags with these */
-		for ( i = 0 ; i < NCAPINTS ; i++ )
-			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
-	}
-
-	printk(KERN_DEBUG "CPU:             Common caps: %08lx %08lx %08lx %08lx\n",
-	       boot_cpu_data.x86_capability[0],
-	       boot_cpu_data.x86_capability[1],
-	       boot_cpu_data.x86_capability[2],
-	       boot_cpu_data.x86_capability[3]);
-}
-/*
- *	Perform early boot up checks for a valid TSC. See arch/i386/kernel/time.c
- */
- 
-void __init dodgy_tsc(void)
-{
-	get_cpu_vendor(&boot_cpu_data);
-
-	if (( boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX ) ||
-	    ( boot_cpu_data.x86_vendor == X86_VENDOR_NSC   ))
-		init_cyrix(&boot_cpu_data);
-}
-
-
-/* These need to match <asm/processor.h> */
-static char *cpu_vendor_names[] __initdata = {
-	"Intel", "Cyrix", "AMD", "UMC", "NexGen", "Centaur", "Rise", "Transmeta", "NSC" };
-
-
-void __init print_cpu_info(struct cpuinfo_x86 *c)
-{
-	char *vendor = NULL;
-
-	if (c->x86_vendor < sizeof(cpu_vendor_names)/sizeof(char *))
-		vendor = cpu_vendor_names[c->x86_vendor];
-	else if (c->cpuid_level >= 0)
-		vendor = c->x86_vendor_id;
-
-	if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
-		printk("%s ", vendor);
-
-	if (!c->x86_model_id[0])
-		printk("%d86", c->x86);
-	else
-		printk("%s", c->x86_model_id);
-
-	if (c->x86_mask || c->cpuid_level >= 0) 
-		printk(" stepping %02x\n", c->x86_mask);
-	else
-		printk("\n");
-}
-
-/*
- *	Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	/* 
-	 * These flag bits must match the definitions in <asm/cpufeature.h>.
-	 * NULL means this bit is undefined or reserved; either way it doesn't
-	 * have meaning as far as Linux is concerned.  Note that it's important
-	 * to realize there is a difference between this table and CPUID -- if
-	 * applications want to get the raw CPUID data, they should access
-	 * /dev/cpu/<cpu_nr>/cpuid instead.
-	 */
-	static char *x86_cap_flags[] = {
-		/* Intel-defined */
-		"fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
-		"cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
-		"pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
-		"fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", NULL,
-
-		/* AMD-defined */
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, "mp", NULL, NULL, "mmxext", NULL,
-		NULL, NULL, NULL, NULL, NULL, "lm", "3dnowext", "3dnow",
-
-		/* Transmeta-defined */
-		"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-		/* Other (Linux-defined) */
-		"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	};
-	struct cpuinfo_x86 *c = v;
-	int i, n = c - cpu_data;
-	int fpu_exception;
-
-#ifdef CONFIG_SMP
-	if (!(cpu_online_map & (1<<n)))
-		return 0;
-#endif
-	seq_printf(m, "processor\t: %d\n"
-		"vendor_id\t: %s\n"
-		"cpu family\t: %d\n"
-		"model\t\t: %d\n"
-		"model name\t: %s\n",
-		n,
-		c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
-		c->x86,
-		c->x86_model,
-		c->x86_model_id[0] ? c->x86_model_id : "unknown");
-
-	if (c->x86_mask || c->cpuid_level >= 0)
-		seq_printf(m, "stepping\t: %d\n", c->x86_mask);
-	else
-		seq_printf(m, "stepping\t: unknown\n");
-
-	if ( cpu_has(c, X86_FEATURE_TSC) ) {
-		seq_printf(m, "cpu MHz\t\t: %lu.%03lu\n",
-			cpu_khz / 1000, (cpu_khz % 1000));
-	}
-
-	/* Cache size */
-	if (c->x86_cache_size >= 0)
-		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
-	
-	/* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
-	fpu_exception = c->hard_math && (ignore_irq13 || cpu_has_fpu);
-	seq_printf(m, "fdiv_bug\t: %s\n"
-			"hlt_bug\t\t: %s\n"
-			"f00f_bug\t: %s\n"
-			"coma_bug\t: %s\n"
-			"fpu\t\t: %s\n"
-			"fpu_exception\t: %s\n"
-			"cpuid level\t: %d\n"
-			"wp\t\t: %s\n"
-			"flags\t\t:",
-		     c->fdiv_bug ? "yes" : "no",
-		     c->hlt_works_ok ? "no" : "yes",
-		     c->f00f_bug ? "yes" : "no",
-		     c->coma_bug ? "yes" : "no",
-		     c->hard_math ? "yes" : "no",
-		     fpu_exception ? "yes" : "no",
-		     c->cpuid_level,
-		     c->wp_works_ok ? "yes" : "no");
-
-	for ( i = 0 ; i < 32*NCAPINTS ; i++ )
-		if ( test_bit(i, c->x86_capability) &&
-		     x86_cap_flags[i] != NULL )
-			seq_printf(m, " %s", x86_cap_flags[i]);
-
-	seq_printf(m, "\nbogomips\t: %lu.%02lu\n\n",
-		     c->loops_per_jiffy/(500000/HZ),
-		     (c->loops_per_jiffy/(5000/HZ)) % 100);
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-struct seq_operations cpuinfo_op = {
-	start:	c_start,
-	next:	c_next,
-	stop:	c_stop,
-	show:	show_cpuinfo,
-};
-
-unsigned long cpu_initialized __initdata = 0;
-
-/*
- * cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
- */
-void __init cpu_init (void)
-{
-	int nr = smp_processor_id();
-	struct tss_struct * t = &init_tss[nr];
-
-	if (test_and_set_bit(nr, &cpu_initialized)) {
-		printk(KERN_WARNING "CPU#%d already initialized!\n", nr);
-		for (;;) __sti();
-	}
-	printk(KERN_INFO "Initializing CPU#%d\n", nr);
-
-	if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
-		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-#ifndef CONFIG_X86_TSC
-	if (tsc_disable && cpu_has_tsc) {
-		printk(KERN_NOTICE "Disabling TSC...\n");
-		/**** FIX-HPA: DOES THIS REALLY BELONG HERE? ****/
-		clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability);
-		set_in_cr4(X86_CR4_TSD);
-	}
-#endif
-
-	__asm__ __volatile__("lgdt %0": "=m" (gdt_descr));
-	__asm__ __volatile__("lidt %0": "=m" (idt_descr));
-
-	/*
-	 * Delete NT
-	 */
-	__asm__("pushfl ; andl $0xffffbfff,(%esp) ; popfl");
-
-	/*
-	 * set up and load the per-CPU TSS and LDT
-	 */
-	atomic_inc(&init_mm.mm_count);
-	current->active_mm = &init_mm;
-	if(current->mm)
-		BUG();
-	enter_lazy_tlb(&init_mm, current, nr);
-
-	t->esp0 = current->thread.esp0;
-	set_tss_desc(nr,t);
-	gdt_table[__TSS(nr)].b &= 0xfffffdff;
-	load_TR(nr);
-	load_LDT(&init_mm.context);
-
-	/* Clear %fs and %gs. */
-	asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
-
-	/* Clear all 6 debug registers: */
-
-#define CD(register) __asm__("movl %0,%%db" #register ::"r"(0) );
-
-	CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
-
-#undef CD
-
-	/*
-	 * Force FPU initialization:
-	 */
-	clear_thread_flag(TIF_USEDFPU);
-	current->used_math = 0;
-	stts();
-}
-
-/*
- *	Early probe support logic for ppro memory erratum #50
- *
- *	This is called before we do cpu ident work
- */
- 
-int __init ppro_with_ram_bug(void)
-{
-	char vendor_id[16];
-	int ident;
-
-	/* Must have CPUID */
-	if(!have_cpuid_p())
-		return 0;
-	if(cpuid_eax(0)<1)
-		return 0;
-	
-	/* Must be Intel */
-	cpuid(0, &ident, 
-		(int *)&vendor_id[0],
-		(int *)&vendor_id[8],
-		(int *)&vendor_id[4]);
-	
-	if(memcmp(vendor_id, "IntelInside", 12))
-		return 0;
-	
-	ident = cpuid_eax(1);
-
-	/* Model 6 */
-
-	if(((ident>>8)&15)!=6)
-		return 0;
-	
-	/* Pentium Pro */
-
-	if(((ident>>4)&15)!=1)
-		return 0;
-	
-	if((ident&15) < 8)
-	{
-		printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
-		return 1;
-	}
-	printk(KERN_INFO "Your Pentium Pro seems ok.\n");
-	return 0;
-}
-	
 /*
  * Local Variables:
  * mode:c

fs/ntfs/ChangeLog

@@ -21,8 +21,38 @@ ToDo:
 	  several copies of almost identicall functions and the functions are
 	  quite big. Modularising them a bit, e.g. a-la get_block(), will make
 	  them cleaner and make code reuse easier.
-	- Want to use dummy inodes for address space i/o. We need some VFS
-	  changes first, which are currently under discussion.
+	- Want to use dummy inodes for address space i/o.
+
+2.0.8 - Major updates for handling of case sensitivity and dcache aliasing.
+
+	Big thanks go to Al Viro and other inhabitants of #kernel for investing
+	their time to discuss the case sensitivity and dcache aliasing issues.
+
+	- Remove unused source file fs/ntfs/attraops.c.
+	- Remove show_inodes mount option(s), thus dropping support for
+	  displaying of short file names.
+	- Remove deprecated mount option posix.
+	- Restore show_sys_files mount option.
+	- Add new mount option case_sensitive, to determine if the driver
+	  treats file names as case sensitive or not. If case sensitive, create
+	  file names in the POSIX namespace. Otherwise create file names in the
+	  LONG/WIN32 namespace. Note, files remain accessible via their short
+	  file name, if it exists.
+	- Remove really dumb logic bug in boot sector recovery code.
+	- Fix dcache aliasing issues wrt short/long file names via changes
+	  to fs/ntfs/dir.c::ntfs_lookup_inode_by_name() and
+	  fs/ntfs/namei.c::ntfs_lookup():
+	  - Add additional argument to ntfs_lookup_inode_by_name() in which we
+	    return information about the matching file name if the case is not
+	    matching or the match is a short file name. See comments above the
+	    function definition for details.
+	  - Change ntfs_lookup() to only create dcache entries for the correctly
+	    cased file name and only for the WIN32 namespace counterpart of DOS
+	    namespace file names. This ensures we have only one dentry per
+	    directory and also removes all dcache aliasing issues between short
+	    and long file names once we add write support. See comments above
+	    function for details.
+	- Fix potential 1 byte overflow in fs/ntfs/unistr.c::ntfs_ucstonls().
 
 2.0.7 - Minor cleanups and updates for changes in core kernel code.
 

fs/ntfs/Makefile

@@ -5,7 +5,7 @@ obj-$(CONFIG_NTFS_FS) += ntfs.o
 ntfs-objs := aops.o attrib.o compress.o debug.o dir.o file.o inode.o mft.o \
 	     mst.o namei.o super.o sysctl.o time.o unistr.o upcase.o
 
-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.0.7\"
+EXTRA_CFLAGS = -DNTFS_VERSION=\"2.0.8\"
 
 ifeq ($(CONFIG_NTFS_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG

fs/ntfs/attraops.c

-#include "ntfs.h"
-
-/*
- * We need to define the attribute object structure. FIXME: Move these to
- * ntfs.h.
- */
-typedef struct {
-	ntfs_inode *a_ni;
-	ntfs_volume *a_vol;
-	atomic_t a_count;
-	s64 a_size;
-	struct rw_semaphore a_sem;
-	struct address_space a_mapping;
-	unsigned long a_flags;
-} attr_obj;
-
-/**
- * ntfs_attr_readpage - fill a page @page of an attribute object @aobj with data
- * @aobj:	attribute object to which the page @page belongs
- * @page:	page cache page to fill with data
- *
- */
-//static int ntfs_attr_readpage(attr_obj *aobj, struct page *page)
-static int ntfs_attr_readpage(struct file *aobj, struct page *page)
-{
-	return -EOPNOTSUPP;
-}
-
-/*
- * Address space operations for accessing attributes. Note that these functions
- * do not accept an inode as the first parameter but an attribute object. We
- * use this to implement a generic interface that is not bound to inodes in
- * order to support multiple named streams per file, multiple bitmaps per file
- * and directory, etc. Basically, this gives access to any attribute within an
- * mft record.
- *
- * We make use of a slab cache for attribute object allocations.
- */
-struct address_space_operations ntfs_attr_aops = {
-	writepage:	NULL,			/* Write dirty page to disk. */
-	readpage:	ntfs_attr_readpage,	/* Fill page with data. */
-	sync_page:	block_sync_page,	/* Currently, just unplugs the
-						   disk request queue. */
-	prepare_write:	NULL,			/* . */
-	commit_write:	NULL,			/* . */
-};
-

fs/ntfs/attrib.c

@@ -22,6 +22,7 @@
 
 #include <linux/buffer_head.h>
 #include "ntfs.h"
+#include "dir.h"
 
 /* Temporary helper functions -- might become macros */
 

fs/ntfs/dir.c

@@ -22,6 +22,7 @@
 
 #include <linux/smp_lock.h>
 #include "ntfs.h"
+#include "dir.h"
 
 /**
  * The little endian Unicode string $I30 as a global constant.
@@ -30,6 +31,564 @@ const uchar_t I30[5] = { const_cpu_to_le16('$'), const_cpu_to_le16('I'),
 		const_cpu_to_le16('3'),	const_cpu_to_le16('0'),
 		const_cpu_to_le16(0) };
 
+/**
+ * ntfs_lookup_inode_by_name - find an inode in a directory given its name
+ * @dir_ni:	ntfs inode of the directory in which to search for the name
+ * @uname:	Unicode name for which to search in the directory
+ * @uname_len:	length of the name @uname in Unicode characters
+ * @res:	return the found file name if necessary (see below)
+ *
+ * Look for an inode with name @uname in the directory with inode @dir_ni.
+ * ntfs_lookup_inode_by_name() walks the contents of the directory looking for
+ * the Unicode name. If the name is found in the directory, the corresponding
+ * inode number (>= 0) is returned as a mft reference in cpu format, i.e. it
+ * is a 64-bit number containing the sequence number.
+ *
+ * On error, a negative value is returned corresponding to the error code. In
+ * particular if the inode is not found -ENOENT is returned. Note that you
+ * can't just check the return value for being negative, you have to check the
+ * inode number for being negative which you can extract using MREC(return
+ * value).
+ *
+ * Note, @uname_len does not include the (optional) terminating NULL character.
+ *
+ * Note, we look for a case sensitive match first but we also look for a case
+ * insensitive match at the same time. If we find a case insensitive match, we
+ * save that for the case that we don't find an exact match, where we return
+ * the case insensitive match and setup @res (which we allocate!) with the mft
+ * reference, the file name type, length and with a copy of the little endian
+ * Unicode file name itself. If we match a file name which is in the DOS name
+ * space, we only return the mft reference and file name type in @res.
+ * ntfs_lookup() then uses this to find the long file name in the inode itself.
+ * This is to avoid polluting the dcache with short file names. We want them to
+ * work but we don't care for how quickly one can access them. This also fixes
+ * the dcache aliasing issues.
+ */
+u64 ntfs_lookup_inode_by_name(ntfs_inode *dir_ni, const uchar_t *uname,
+		const int uname_len, ntfs_name **res)
+{
+	ntfs_volume *vol = dir_ni->vol;
+	struct super_block *sb = vol->sb;
+	MFT_RECORD *m;
+	INDEX_ROOT *ir;
+	INDEX_ENTRY *ie;
+	INDEX_ALLOCATION *ia;
+	u8 *index_end;
+	u64 mref;
+	attr_search_context *ctx;
+	int err = 0, rc;
+	VCN vcn, old_vcn;
+	struct address_space *ia_mapping;
+	struct page *page;
+	u8 *kaddr;
+	ntfs_name *name = NULL;
+
+	/* Get hold of the mft record for the directory. */
+	m = map_mft_record(READ, dir_ni);
+	if (IS_ERR(m))
+		goto map_err_out;
+
+	ctx = get_attr_search_ctx(dir_ni, m);
+	if (!ctx) {
+		err = -ENOMEM;
+		goto unm_err_out;
+	}
+
+	/* Find the index root attribute in the mft record. */
+	if (!lookup_attr(AT_INDEX_ROOT, I30, 4, CASE_SENSITIVE, 0, NULL, 0,
+			ctx)) {
+		ntfs_error(sb, "Index root attribute missing in directory "
+				"inode 0x%Lx.",
+				(unsigned long long)dir_ni->mft_no);
+		err = -EIO;
+		goto put_unm_err_out;
+	}
+	/* Get to the index root value (it's been verified in read_inode). */
+	ir = (INDEX_ROOT*)((u8*)ctx->attr +
+			le16_to_cpu(ctx->attr->_ARA(value_offset)));
+	index_end = (u8*)&ir->index + le32_to_cpu(ir->index.index_length);
+	/* The first index entry. */
+	ie = (INDEX_ENTRY*)((u8*)&ir->index +
+			le32_to_cpu(ir->index.entries_offset));
+	/*
+	 * Loop until we exceed valid memory (corruption case) or until we
+	 * reach the last entry.
+	 */
+	for (;; ie = (INDEX_ENTRY*)((u8*)ie + le16_to_cpu(ie->_IEH(length)))) {
+		/* Bounds checks. */
+		if ((u8*)ie < (u8*)ctx->mrec || (u8*)ie +
+				sizeof(INDEX_ENTRY_HEADER) > index_end ||
+				(u8*)ie + le16_to_cpu(ie->_IEH(key_length)) >
+				index_end)
+			goto dir_err_out;
+		/*
+		 * The last entry cannot contain a name. It can however contain
+		 * a pointer to a child node in the B+tree so we just break out.
+		 */
+		if (ie->_IEH(flags) & INDEX_ENTRY_END)
+			break;
+		/*
+		 * We perform a case sensitive comparison and if that matches
+		 * we are done and return the mft reference of the inode (i.e.
+		 * the inode number together with the sequence number for
+		 * consistency checking). We convert it to cpu format before
+		 * returning.
+		 */
+		if (ntfs_are_names_equal(uname, uname_len,
+				(uchar_t*)&ie->key.file_name.file_name,
+				ie->key.file_name.file_name_length,
+				CASE_SENSITIVE, vol->upcase, vol->upcase_len)) {
+found_it:
+			/*
+			 * We have a perfect match, so we don't need to care
+			 * about having matched imperfectly before, so we can
+			 * free name and set *res to NULL.
+			 * However, if the perfect match is a short file name,
+			 * we need to signal this through *res, so that
+			 * ntfs_lookup() can fix dcache aliasing issues.
+			 * As an optimization we just reuse an existing
+			 * allocation of *res.
+			 */
+			if (ie->key.file_name.file_name_type == FILE_NAME_DOS) {
+				if (!name) {
+					name = kmalloc(sizeof(ntfs_name),
+							GFP_NOFS);
+					if (!name) {
+						err = -ENOMEM;
+						goto put_unm_err_out;
+					}
+				}
+				name->mref = le64_to_cpu(
+						ie->_IIF(indexed_file));
+				name->type = FILE_NAME_DOS;
+				name->len = 0;
+				*res = name;
+			} else {
+				if (name)
+					kfree(name);
+				*res = NULL;
+			}
+			mref = le64_to_cpu(ie->_IIF(indexed_file));
+			put_attr_search_ctx(ctx);
+			unmap_mft_record(READ, dir_ni);
+			return mref;
+		}
+		/*
+		 * For a case insensitive mount, we also perform a case
+		 * insensitive comparison (provided the file name is not in the
+		 * POSIX namespace). If the comparison matches, and the name is
+		 * in the WIN32 namespace, we cache the filename in *res so
+		 * that the caller, ntfs_lookup(), can work on it. If the
+		 * comparison matches, and the name is in the DOS namespace, we
+		 * only cache the mft reference and the file name type (we set
+		 * the name length to zero for simplicity).
+		 */
+		if (!NVolCaseSensitive(vol) &&
+				ie->key.file_name.file_name_type &&
+				ntfs_are_names_equal(uname, uname_len,
+				(uchar_t*)&ie->key.file_name.file_name,
+				ie->key.file_name.file_name_length,
+				IGNORE_CASE, vol->upcase, vol->upcase_len)) {
+			int name_size = sizeof(ntfs_name);
+			u8 type = ie->key.file_name.file_name_type;
+			u8 len = ie->key.file_name.file_name_length;
+
+			/* Only one case insensitive matching name allowed. */
+			if (name) {
+				ntfs_error(sb, "Found already allocated name "
+						"in phase 1. Please run chkdsk "
+						"and if that doesn't find any "
+						"errors please report you saw "
+						"this message to "
+						"linux-ntfs-dev@lists.sf.net.");
+				goto dir_err_out;
+			}
+
+			if (type != FILE_NAME_DOS)
+				name_size += len * sizeof(uchar_t);
+			name = kmalloc(name_size, GFP_NOFS);
+			if (!name) {
+				err = -ENOMEM;
+				goto put_unm_err_out;
+			}
+			name->mref = le64_to_cpu(ie->_IIF(indexed_file));
+			name->type = type;
+			if (type != FILE_NAME_DOS) {
+				name->len = len;
+				memcpy(name->name, ie->key.file_name.file_name,
+						len * sizeof(uchar_t));
+			} else
+				name->len = 0;
+			*res = name;
+		}
+		/*
+		 * Not a perfect match, need to do full blown collation so we
+		 * know which way in the B+tree we have to go.
+		 */
+		rc = ntfs_collate_names(uname, uname_len,
+				(uchar_t*)&ie->key.file_name.file_name,
+				ie->key.file_name.file_name_length, 1,
+				IGNORE_CASE, vol->upcase, vol->upcase_len);
+		/*
+		 * If uname collates before the name of the current entry, there
+		 * is definitely no such name in this index but we might need to
+		 * descend into the B+tree so we just break out of the loop.
+		 */
+		if (rc == -1)
+			break;
+		/* The names are not equal, continue the search. */
+		if (rc)
+			continue;
+		/*
+		 * Names match with case insensitive comparison, now try the
+		 * case sensitive comparison, which is required for proper
+		 * collation.
+		 */
+		rc = ntfs_collate_names(uname, uname_len,
+				(uchar_t*)&ie->key.file_name.file_name,
+				ie->key.file_name.file_name_length, 1,
+				CASE_SENSITIVE, vol->upcase, vol->upcase_len);
+		if (rc == -1)
+			break;
+		if (rc)
+			continue;
+		/*
+		 * Perfect match, this will never happen as the
+		 * ntfs_are_names_equal() call will have gotten a match but we
+		 * still treat it correctly.
+		 */
+		goto found_it;
+	}
+	/*
+	 * We have finished with this index without success. Check for the
+	 * presence of a child node and if not present return -ENOENT, unless
+	 * we have got a matching name cached in name in which case return the
+	 * mft reference associated with it.
+	 */
+	if (!(ie->_IEH(flags) & INDEX_ENTRY_NODE)) {
+		if (name) {
+			put_attr_search_ctx(ctx);
+			unmap_mft_record(READ, dir_ni);
+			return name->mref;
+		}
+		ntfs_debug("Entry not found.");
+		err = -ENOENT;
+		goto put_unm_err_out;
+	} /* Child node present, descend into it. */
+	/* Consistency check: Verify that an index allocation exists. */
+	if (!NInoIndexAllocPresent(dir_ni)) {
+		ntfs_error(sb, "No index allocation attribute but index entry "
+				"requires one. Directory inode 0x%Lx is "
+				"corrupt or driver bug.",
+				(unsigned long long)dir_ni->mft_no);
+		err = -EIO;
+		goto put_unm_err_out;
+	}
+	/* Get the starting vcn of the index_block holding the child node. */
+	vcn = sle64_to_cpup((u8*)ie + le16_to_cpu(ie->_IEH(length)) - 8);
+	ia_mapping = VFS_I(dir_ni)->i_mapping;
+descend_into_child_node:
+	/*
+	 * Convert vcn to index into the index allocation attribute in units
+	 * of PAGE_CACHE_SIZE and map the page cache page, reading it from
+	 * disk if necessary.
+	 */
+	page = ntfs_map_page(ia_mapping, vcn <<
+			dir_ni->_IDM(index_vcn_size_bits) >> PAGE_CACHE_SHIFT);
+	if (IS_ERR(page)) {
+		ntfs_error(sb, "Failed to map directory index page, error %ld.",
+				-PTR_ERR(page));
+		goto put_unm_err_out;
+	}
+	kaddr = (u8*)page_address(page);
+fast_descend_into_child_node:
+	/* Get to the index allocation block. */
+	ia = (INDEX_ALLOCATION*)(kaddr + ((vcn <<
+			dir_ni->_IDM(index_vcn_size_bits)) & ~PAGE_CACHE_MASK));
+	/* Bounds checks. */
+	if ((u8*)ia < kaddr || (u8*)ia > kaddr + PAGE_CACHE_SIZE) {
+		ntfs_error(sb, "Out of bounds check failed. Corrupt directory "
+				"inode 0x%Lx or driver bug.",
+				(unsigned long long)dir_ni->mft_no);
+		err = -EIO;
+		goto unm_unm_err_out;
+	}
+	if (sle64_to_cpu(ia->index_block_vcn) != vcn) {
+		ntfs_error(sb, "Actual VCN (0x%Lx) of index buffer is "
+				"different from expected VCN (0x%Lx). "
+				"Directory inode 0x%Lx is corrupt or driver "
+				"bug.",
+				(long long)sle64_to_cpu(ia->index_block_vcn),
+				(long long)vcn,
+				(unsigned long long)dir_ni->mft_no);
+		err = -EIO;
+		goto unm_unm_err_out;
+	}
+	if (le32_to_cpu(ia->index.allocated_size) + 0x18 !=
+			dir_ni->_IDM(index_block_size)) {
+		ntfs_error(sb, "Index buffer (VCN 0x%Lx) of directory inode "
+				"0x%Lx has a size (%u) differing from the "
+				"directory specified size (%u). Directory "
+				"inode is corrupt or driver bug.",
+				(long long)vcn,
+				(unsigned long long)dir_ni->mft_no,
+				le32_to_cpu(ia->index.allocated_size) + 0x18,
+				dir_ni->_IDM(index_block_size));
+		err = -EIO;
+		goto unm_unm_err_out;
+	}
+	index_end = (u8*)ia + dir_ni->_IDM(index_block_size);
+	if (index_end > kaddr + PAGE_CACHE_SIZE) {
+		ntfs_error(sb, "Index buffer (VCN 0x%Lx) of directory inode "
+				"0x%Lx crosses page boundary. Impossible! "
+				"Cannot access! This is probably a bug in the "
+				"driver.", (long long)vcn,
+				(unsigned long long)dir_ni->mft_no);
+		err = -EIO;
+		goto unm_unm_err_out;
+	}
+	index_end = (u8*)&ia->index + le32_to_cpu(ia->index.index_length);
+	if (index_end > (u8*)ia + dir_ni->_IDM(index_block_size)) {
+		ntfs_error(sb, "Size of index buffer (VCN 0x%Lx) of directory "
+				"inode 0x%Lx exceeds maximum size.",
+				(long long)vcn,
+				(unsigned long long)dir_ni->mft_no);
+		err = -EIO;
+		goto unm_unm_err_out;
+	}
+	/* The first index entry. */
+	ie = (INDEX_ENTRY*)((u8*)&ia->index +
+			le32_to_cpu(ia->index.entries_offset));
+	/*
+	 * Iterate similar to above big loop but applied to index buffer, thus
+	 * loop until we exceed valid memory (corruption case) or until we
+	 * reach the last entry.
+	 */
+	for (;; ie = (INDEX_ENTRY*)((u8*)ie + le16_to_cpu(ie->_IEH(length)))) {
+		/* Bounds check. */
+		if ((u8*)ie < (u8*)ia || (u8*)ie +
+				sizeof(INDEX_ENTRY_HEADER) > index_end ||
+				(u8*)ie + le16_to_cpu(ie->_IEH(key_length)) >
+				index_end) {
+			ntfs_error(sb, "Index entry out of bounds in "
+					"directory inode 0x%Lx.",
+					(unsigned long long)dir_ni->mft_no);
+			err = -EIO;
+			goto unm_unm_err_out;
+		}
+		/*
+		 * The last entry cannot contain a name. It can however contain
+		 * a pointer to a child node in the B+tree so we just break out.
+		 */
+		if (ie->_IEH(flags) & INDEX_ENTRY_END)
+			break;
+		/*
+		 * We perform a case sensitive comparison and if that matches
+		 * we are done and return the mft reference of the inode (i.e.
+		 * the inode number together with the sequence number for
+		 * consistency checking). We convert it to cpu format before
+		 * returning.
+		 */
+		if (ntfs_are_names_equal(uname, uname_len,
+				(uchar_t*)&ie->key.file_name.file_name,
+				ie->key.file_name.file_name_length,
+				CASE_SENSITIVE, vol->upcase, vol->upcase_len)) {
+found_it2:
+			/*
+			 * We have a perfect match, so we don't need to care
+			 * about having matched imperfectly before, so we can
+			 * free name and set *res to NULL.
+			 * However, if the perfect match is a short file name,
+			 * we need to signal this through *res, so that
+			 * ntfs_lookup() can fix dcache aliasing issues.
+			 * As an optimization we just reuse an existing
+			 * allocation of *res.
+			 */
+			if (ie->key.file_name.file_name_type == FILE_NAME_DOS) {
+				if (!name) {
+					name = kmalloc(sizeof(ntfs_name),
+							GFP_NOFS);
+					if (!name) {
+						err = -ENOMEM;
+						goto unm_unm_err_out;
+					}
+				}
+				name->mref = le64_to_cpu(
+						ie->_IIF(indexed_file));
+				name->type = FILE_NAME_DOS;
+				name->len = 0;
+				*res = name;
+			} else {
+				if (name)
+					kfree(name);
+				*res = NULL;
+			}
+			mref = le64_to_cpu(ie->_IIF(indexed_file));
+			ntfs_unmap_page(page);
+			put_attr_search_ctx(ctx);
+			unmap_mft_record(READ, dir_ni);
+			return mref;
+		}
+		/*
+		 * For a case insensitive mount, we also perform a case
+		 * insensitive comparison (provided the file name is not in the
+		 * POSIX namespace). If the comparison matches, and the name is
+		 * in the WIN32 namespace, we cache the filename in *res so
+		 * that the caller, ntfs_lookup(), can work on it. If the
+		 * comparison matches, and the name is in the DOS namespace, we
+		 * only cache the mft reference and the file name type (we set
+		 * the name length to zero for simplicity).
+		 */
+		if (!NVolCaseSensitive(vol) &&
+				ie->key.file_name.file_name_type &&
+				ntfs_are_names_equal(uname, uname_len,
+				(uchar_t*)&ie->key.file_name.file_name,
+				ie->key.file_name.file_name_length,
+				IGNORE_CASE, vol->upcase, vol->upcase_len)) {
+			int name_size = sizeof(ntfs_name);
+			u8 type = ie->key.file_name.file_name_type;
+			u8 len = ie->key.file_name.file_name_length;
+
+			/* Only one case insensitive matching name allowed. */
+			if (name) {
+				ntfs_error(sb, "Found already allocated name "
+						"in phase 2. Please run chkdsk "
+						"and if that doesn't find any "
+						"errors please report you saw "
+						"this message to "
+						"linux-ntfs-dev@lists.sf.net.");
+				ntfs_unmap_page(page);
+				goto dir_err_out;
+			}
+
+			if (type != FILE_NAME_DOS)
+				name_size += len * sizeof(uchar_t);
+			name = kmalloc(name_size, GFP_NOFS);
+			if (!name) {
+				err = -ENOMEM;
+				goto put_unm_err_out;
+			}
+			name->mref = le64_to_cpu(ie->_IIF(indexed_file));
+			name->type = type;
+			if (type != FILE_NAME_DOS) {
+				name->len = len;
+				memcpy(name->name, ie->key.file_name.file_name,
+						len * sizeof(uchar_t));
+			} else
+				name->len = 0;
+			*res = name;
+		}
+		/*
+		 * Not a perfect match, need to do full blown collation so we
+		 * know which way in the B+tree we have to go.
+		 */
+		rc = ntfs_collate_names(uname, uname_len,
+				(uchar_t*)&ie->key.file_name.file_name,
+				ie->key.file_name.file_name_length, 1,
+				IGNORE_CASE, vol->upcase, vol->upcase_len);
+		/*
+		 * If uname collates before the name of the current entry, there
+		 * is definitely no such name in this index but we might need to
+		 * descend into the B+tree so we just break out of the loop.
+		 */
+		if (rc == -1)
+			break;
+		/* The names are not equal, continue the search. */
+		if (rc)
+			continue;
+		/*
+		 * Names match with case insensitive comparison, now try the
+		 * case sensitive comparison, which is required for proper
+		 * collation.
+		 */
+		rc = ntfs_collate_names(uname, uname_len,
+				(uchar_t*)&ie->key.file_name.file_name,
+				ie->key.file_name.file_name_length, 1,
+				CASE_SENSITIVE, vol->upcase, vol->upcase_len);
+		if (rc == -1)
+			break;
+		if (rc)
+			continue;
+		/*
+		 * Perfect match, this will never happen as the
+		 * ntfs_are_names_equal() call will have gotten a match but we
+		 * still treat it correctly.
+		 */
+		goto found_it2;
+	}
+	/*
+	 * We have finished with this index buffer without success. Check for
+	 * the presence of a child node.
+	 */
+	if (ie->_IEH(flags) & INDEX_ENTRY_NODE) {
+		if ((ia->index.flags & NODE_MASK) == LEAF_NODE) {
+			ntfs_error(sb, "Index entry with child node found in "
+					"a leaf node in directory inode 0x%Lx.",
+					(unsigned long long)dir_ni->mft_no);
+			err = -EIO;
+			goto unm_unm_err_out;
+		}
+		/* Child node present, descend into it. */
+		old_vcn = vcn;
+		vcn = sle64_to_cpup((u8*)ie +
+				le16_to_cpu(ie->_IEH(length)) - 8);
+		if (vcn >= 0) {
+			/* If vcn is in the same page cache page as old_vcn we
+			 * recycle the mapped page. */
+			if (old_vcn << vol->cluster_size_bits >>
+					PAGE_CACHE_SHIFT == vcn <<
+					vol->cluster_size_bits >>
+					PAGE_CACHE_SHIFT)
+				goto fast_descend_into_child_node;
+			ntfs_unmap_page(page);
+			goto descend_into_child_node;
+		}
+		ntfs_error(sb, "Negative child node vcn in directory inode "
+				"0x%Lx.", (unsigned long long)dir_ni->mft_no);
+		err = -EIO;
+		goto unm_unm_err_out;
+	}
+	/*
+	 * No child node present, return -ENOENT, unless we have got a matching
+	 * name cached in name in which case return the mft reference
+	 * associated with it.
+	 */
+	if (name) {
+		ntfs_unmap_page(page);
+		put_attr_search_ctx(ctx);
+		unmap_mft_record(READ, dir_ni);
+		return name->mref;
+	}
+	ntfs_debug("Entry not found.");
+	err = -ENOENT;
+unm_unm_err_out:
+	ntfs_unmap_page(page);
+put_unm_err_out:
+	put_attr_search_ctx(ctx);
+unm_err_out:
+	unmap_mft_record(READ, dir_ni);
+	if (name) {
+		kfree(name);
+		*res = NULL;
+	}
+	return ERR_MREF(err);
+map_err_out:
+	ntfs_error(sb, "map_mft_record(READ) failed with error code %ld.",
+			-PTR_ERR(m));
+	return ERR_MREF(PTR_ERR(m));
+dir_err_out:
+	ntfs_error(sb, "Corrupt directory. Aborting lookup.");
+	err = -EIO;
+	goto put_unm_err_out;
+}
+
+#if 0
+
+// TODO: (AIA)
+// The algorithm embedded in this code will be required for the time when we
+// want to support adding of entries to directories, where we require correct
+// collation of file names in order not to cause corruption of the file system.
+
 /**
  * ntfs_lookup_inode_by_name - find an inode in a directory given its name
  * @dir_ni:	ntfs inode of the directory in which to search for the name
@@ -414,6 +973,8 @@ u64 ntfs_lookup_inode_by_name(ntfs_inode *dir_ni, const uchar_t *uname,
 	goto put_unm_err_out;
 }
 
+#endif
+
 typedef union {
 	INDEX_ROOT *ir;
 	INDEX_ALLOCATION *ia;
@@ -447,7 +1008,6 @@ static inline int ntfs_filldir(ntfs_volume *vol, struct file *filp,
 	int name_len;
 	unsigned dt_type;
 	FILE_NAME_TYPE_FLAGS name_type;
-	READDIR_OPTIONS readdir_opts;
 
 	/* Advance the position even if going to skip the entry. */
 	if (index_type == INDEX_TYPE_ALLOCATION)
@@ -457,25 +1017,17 @@ static inline int ntfs_filldir(ntfs_volume *vol, struct file *filp,
 				vol->mft_record_size;
 	else /* if (index_type == INDEX_TYPE_ROOT) */
 		filp->f_pos = (u8*)ie - (u8*)iu.ir;
-	readdir_opts = vol->readdir_opts;
 	name_type = ie->key.file_name.file_name_type;
-	if (name_type == FILE_NAME_DOS && RHideDosNames(readdir_opts)) {
+	if (name_type == FILE_NAME_DOS) {
 		ntfs_debug("Skipping DOS name space entry.");
 		return 0;
 	}
-	if (RHideLongNames(readdir_opts)) {
-		if (name_type == FILE_NAME_WIN32 ||
-				name_type == FILE_NAME_POSIX) {
-			ntfs_debug("Skipping WIN32/POSIX name space entry.");
-			return 0;
-		}
-	}
 	if (MREF_LE(ie->_IIF(indexed_file)) == FILE_root) {
 		ntfs_debug("Skipping root directory self reference entry.");
 		return 0;
 	}
 	if (MREF_LE(ie->_IIF(indexed_file)) < FILE_first_user &&
-			RHideSystemFiles(readdir_opts)) {
+			!NVolShowSystemFiles(vol)) {
 		ntfs_debug("Skipping system file.");
 		return 0;
 	}
@@ -496,7 +1048,8 @@ static inline int ntfs_filldir(ntfs_volume *vol, struct file *filp,
 			(unsigned long long)MREF_LE(ie->_IIF(indexed_file)),
 			dt_type == DT_DIR ? "DIR" : "REG");
 	return filldir(dirent, name, name_len, filp->f_pos,
-			(unsigned long)MREF_LE(ie->_IIF(indexed_file)), dt_type);
+			(unsigned long)MREF_LE(ie->_IIF(indexed_file)),
+			dt_type);
 }
 
 /*
@@ -510,7 +1063,7 @@ static inline int ntfs_filldir(ntfs_volume *vol, struct file *filp,
  * index root entries and then the index allocation entries that are marked
  * as in use in the index bitmap.
  * While this will return the names in random order this doesn't matter for
- * readdir but OTOH results in faster readdir.
+ * readdir but OTOH results in a faster readdir.
  */
 static int ntfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 {

fs/ntfs/dir.h

+/*
+ * dir.h - Defines for directory handling in NTFS Linux kernel driver. Part of
+ *	   the Linux-NTFS project.
+ *
+ * Copyright (c) 2002 Anton Altaparmakov.
+ *
+ * This program/include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program/include file is distributed in the hope that it will be 
+ * useful, but WITHOUT ANY WARRANTY; without even the implied warranty 
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program (in the main directory of the Linux-NTFS 
+ * distribution in the file COPYING); if not, write to the Free Software
+ * Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_NTFS_DIR_H
+#define _LINUX_NTFS_DIR_H
+
+#include "layout.h"
+
+/*
+ * ntfs_name is used to return the file name to the caller of
+ * ntfs_lookup_inode_by_name() in order for the caller (namei.c::ntfs_lookup())
+ * to be able to deal with dcache aliasing issues.
+ */
+typedef struct {
+	MFT_REF mref;
+	FILE_NAME_TYPE_FLAGS type;
+	u8 len;
+	uchar_t name[0];
+} __attribute__ ((__packed__)) ntfs_name;
+
+/* The little endian Unicode string $I30 as a global constant. */
+extern const uchar_t I30[5];
+
+extern u64 ntfs_lookup_inode_by_name(ntfs_inode *dir_ni, const uchar_t *uname,
+		const int uname_len, ntfs_name **res);
+
+#endif /* _LINUX_NTFS_FS_DIR_H */
+

fs/ntfs/inode.c

@@ -23,6 +23,7 @@
 #include <linux/buffer_head.h>
 
 #include "ntfs.h"
+#include "dir.h"
 
 struct inode *ntfs_alloc_big_inode(struct super_block *sb)
 {
@@ -1337,13 +1338,6 @@ void ntfs_clear_big_inode(struct inode *vi)
 	return;
 }
 
-static const option_t si_readdir_opts_arr[] = {
-	{ SHOW_SYSTEM,	"system" },
-	{ SHOW_WIN32,	"win32" },
-	{ SHOW_DOS,	"dos" },
-	{ 0,		NULL }
-};
-
 /**
  * ntfs_show_options - show mount options in /proc/mounts
  * @sf:		seq_file in which to write our mount options
@@ -1368,20 +1362,10 @@ int ntfs_show_options(struct seq_file *sf, struct vfsmount *mnt)
 		seq_printf(sf, ",dmask=0%o", vol->dmask);
 	}
 	seq_printf(sf, ",nls=%s", vol->nls_map->charset);
-	switch (vol->readdir_opts) {
-	case SHOW_ALL:
-		seq_printf(sf, ",show_inodes=all");
-		break;
-	case SHOW_POSIX:
-		seq_printf(sf, ",show_inodes=posix");
-		break;
-	default:
-		for (i = 0; si_readdir_opts_arr[i].val; i++) {
-			if (si_readdir_opts_arr[i].val & vol->readdir_opts)
-				seq_printf(sf, ",show_inodes=%s",
-						si_readdir_opts_arr[i].str);
-		}
-	}
+	if (NVolCaseSensitive(vol))
+		seq_printf(sf, ",case_sensitive");
+	if (NVolShowSystemFiles(vol))
+		seq_printf(sf, ",show_sys_files");
 	for (i = 0; on_errors_arr[i].val; i++) {
 		if (on_errors_arr[i].val & vol->on_errors)
 			seq_printf(sf, ",errors=%s", on_errors_arr[i].str);

fs/ntfs/layout.h

@@ -29,7 +29,7 @@
 #include <linux/list.h>
 #include <asm/byteorder.h>
 
-#include "volume.h"
+#include "types.h"
 
 /*
  * Constant endianness conversion defines.
@@ -679,7 +679,7 @@ typedef ATTR_RECORD ATTR_REC;
  */
 typedef enum {
 	/*
-	 * These flags are only presnt in the STANDARD_INFORMATION attribute
+	 * These flags are only present in the STANDARD_INFORMATION attribute
 	 * (in the field file_attributes).
 	 */
 	FILE_ATTR_READONLY		= const_cpu_to_le32(0x00000001),

fs/ntfs/namei.c

@@ -20,7 +20,10 @@
  * Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/dcache.h>
+
 #include "ntfs.h"
+#include "dir.h"
 
 /**
  * ntfs_lookup - find the inode represented by a dentry in a directory inode
@@ -43,14 +46,55 @@
  * dentry @dent. The dentry is then termed a negative dentry.
  *
  * Only if an actual error occurs, do we return an error via ERR_PTR().
+ *
+ * In order to handle the case insensitivity issues of NTFS with regards to the
+ * dcache and the dcache requiring only one dentry per directory, we deal with
+ * dentry aliases that only differ in case in ->ntfs_lookup() while maintining
+ * a case sensitive dcache. This means that we get the full benefit of dcache
+ * speed when the file/directory is looked up with the same case as returned by
+ * ->ntfs_readdir() but that a lookup for any other case (or for the short file
+ * name) will not find anything in dcache and will enter ->ntfs_lookup()
+ * instead, where we search the directory for a fully matching file name
+ * (including case) and if that is not found, we search for a file name that
+ * matches with different case and if that has non-POSIX semantics we return
+ * that. We actually do only one search (case sensitive) and keep tabs on
+ * whether we have found a case insensitive match in the process.
+ *
+ * To simplify matters for us, we do not treat the short vs long filenames as
+ * two hard links but instead if the lookup matches a short filename, we
+ * return the dentry for the corresponding long filename instead.
+ *
+ * There are three cases we need to distinguish here:
+ *
+ * 1) @dent perfectly matches (i.e. including case) a directory entry with a
+ *    file name in the WIN32 or POSIX namespaces. In this case
+ *    ntfs_lookup_inode_by_name() will return with name set to NULL and we
+ *    just d_add() @dent.
+ * 2) @dent matches (not including case) a directory entry with a file name in
+ *    the WIN32 namespace. In this case ntfs_lookup_inode_by_name() will return
+ *    with name set to point to a kmalloc()ed ntfs_name structure containing
+ *    the properly cased little endian Unicode name. We convert the name to the
+ *    current NLS code page, search if a dentry with this name already exists
+ *    and if so return that instead of @dent. The VFS will then destroy the old
+ *    @dent and use the one we returned. If a dentry is not found, we allocate
+ *    a new one, d_add() it, and return it as above.
+ * 3) @dent matches either perfectly or not (i.e. we don't care about case) a
+ *    directory entry with a file name in the DOS namespace. In this case
+ *    ntfs_lookup_inode_by_name() will return with name set to point to a
+ *    kmalloc()ed ntfs_name structure containing the mft reference (cpu endian)
+ *    of the inode. We use the mft reference to read the inode and to find the
+ *    file name in the WIN32 namespace corresponding to the matched short file
+ *    name. We then convert the name to the current NLS code page, and proceed
+ *    searching for a dentry with this name, etc, as in case 2), above.
  */
 static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent)
 {
 	ntfs_volume *vol = NTFS_SB(dir_ino->i_sb);
 	struct inode *dent_inode;
+	uchar_t *uname;
+	ntfs_name *name = NULL;
 	u64 mref;
 	unsigned long dent_ino;
-	uchar_t *uname;
 	int uname_len;
 
 	ntfs_debug("Looking up %s in directory inode 0x%lx.",
@@ -62,7 +106,8 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent)
 		ntfs_error(vol->sb, "Failed to convert name to Unicode.");
 		return ERR_PTR(uname_len);
 	}
-	mref = ntfs_lookup_inode_by_name(NTFS_I(dir_ino), uname, uname_len);
+	mref = ntfs_lookup_inode_by_name(NTFS_I(dir_ino), uname, uname_len,
+			&name);
 	kmem_cache_free(ntfs_name_cache, uname);
 	if (!IS_ERR_MREF(mref)) {
 		dent_ino = (unsigned long)MREF(mref);
@@ -72,10 +117,18 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent)
 			/* Consistency check. */
 			if (MSEQNO(mref) == NTFS_I(dent_inode)->seq_no ||
 					dent_ino == FILE_MFT) {
+				/* Perfect WIN32/POSIX match. -- Case 1. */
+				if (!name) {
 					d_add(dent, dent_inode);
 					ntfs_debug("Done.");
 					return NULL;
 				}
+				/*
+				 * We are too indented. Handle imperfect
+				 * matches and short file names further below.
+				 */
+				goto handle_name;
+			}
 			ntfs_error(vol->sb, "Found stale reference to inode "
 					"0x%Lx (reference sequence number = "
 					"0x%x, inode sequence number = 0x%x, "
@@ -88,8 +141,11 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent)
 			ntfs_error(vol->sb, "iget(0x%Lx) failed, returning "
 					"-EACCES.",
 					(unsigned long long)MREF(mref));
+		if (name)
+			kfree(name);
 		return ERR_PTR(-EACCES);
 	}
+	/* It is guaranteed that name is no longer allocated at this point. */
 	if (MREF_ERR(mref) == -ENOENT) {
 		ntfs_debug("Entry was not found, adding negative dentry.");
 		/* The dcache will handle negative entries. */
@@ -100,9 +156,133 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent)
 	ntfs_error(vol->sb, "ntfs_lookup_ino_by_name() failed with error "
 			"code %i.", -MREF_ERR(mref));
 	return ERR_PTR(MREF_ERR(mref));
+
+	// TODO: Consider moving this lot to a separate function! (AIA)
+handle_name:
+   {
+	struct dentry *real_dent;
+	attr_search_context *ctx;
+	ntfs_inode *ni = NTFS_I(dent_inode);
+	int err;
+	struct qstr nls_name;
+
+	nls_name.name = NULL;
+	if (name->type != FILE_NAME_DOS) {			/* Case 2. */
+		nls_name.len = (unsigned)ntfs_ucstonls(vol,
+				(uchar_t*)&name->name, name->len,
+				(unsigned char**)&nls_name.name,
+				name->len * 3 + 1);
+		kfree(name);
+	} else /* if (name->type == FILE_NAME_DOS) */ {		/* Case 3. */
+		MFT_RECORD *m;
+		FILE_NAME_ATTR *fn;
+
+		kfree(name);
+
+		/* Find the WIN32 name corresponding to the matched DOS name. */
+		ni = NTFS_I(dent_inode);
+		m = map_mft_record(READ, ni);
+		if (IS_ERR(m)) {
+			err = PTR_ERR(m);
+			goto name_err_out;
+		}
+		ctx = get_attr_search_ctx(ni, m);
+		if (!ctx) {
+			err = -ENOMEM;
+			goto unm_err_out;
+		}
+		do {
+			ATTR_RECORD *a;
+			u32 val_len;
+
+			if (!lookup_attr(AT_FILE_NAME, NULL, 0, 0, 0, NULL, 0,
+					ctx)) {
+				ntfs_error(vol->sb, "Inode corrupt: No WIN32 "
+						"namespace counterpart to DOS "
+						"file name. Run chkdsk.");
+				err = -EIO;
+				goto put_unm_err_out;
+			}
+			/* Consistency checks. */
+			a = ctx->attr;
+			if (a->non_resident || a->flags)
+				goto eio_put_unm_err_out;
+			val_len = le32_to_cpu(a->_ARA(value_length));
+			if (le16_to_cpu(a->_ARA(value_offset)) + val_len >
+					le32_to_cpu(a->length))
+				goto eio_put_unm_err_out;
+			fn = (FILE_NAME_ATTR*)((u8*)ctx->attr + le16_to_cpu(
+					ctx->attr->_ARA(value_offset)));
+			if ((u32)(fn->file_name_length * sizeof(uchar_t) +
+					sizeof(FILE_NAME_ATTR)) > val_len)
+				goto eio_put_unm_err_out;
+		} while (fn->file_name_type != FILE_NAME_WIN32);
+
+		/* Convert the found WIN32 name to current NLS code page. */
+		nls_name.len = (unsigned)ntfs_ucstonls(vol,
+				(uchar_t*)&fn->file_name, fn->file_name_length,
+				(unsigned char**)&nls_name.name,
+				fn->file_name_length * 3 + 1);
+
+		put_attr_search_ctx(ctx);
+		unmap_mft_record(READ, ni);
+	}
+
+	/* Check if a conversion error occured. */
+	if ((signed)nls_name.len < 0) {
+		err = (signed)nls_name.len;
+		goto name_err_out;
+	}
+	nls_name.hash = full_name_hash(nls_name.name, nls_name.len);
+
+	// FIXME: Do we need dcache_lock or dparent_lock here or is the
+	// fact that i_sem is held on the parent inode sufficient? (AIA)
+
+	/* Does a dentry matching the nls_name exist already? */
+	real_dent = d_lookup(dent->d_parent, &nls_name);
+	/* If not, create it now. */
+	if (!real_dent) {
+		real_dent = d_alloc(dent->d_parent, &nls_name);
+		kfree(nls_name.name);
+		if (!real_dent) {
+			err = -ENOMEM;
+			goto name_err_out;
+		}
+		d_add(real_dent, dent_inode);
+		return real_dent;
+	}
+	kfree(nls_name.name);
+	/* Matching dentry exists, check if it is negative. */
+	if (real_dent->d_inode) {
+		BUG_ON(real_dent->d_inode != dent_inode);
+		/*
+		 * Already have the inode and the dentry attached, decrement
+		 * the reference count to balance the iget() we did earlier on.
+		 */
+		iput(dent_inode);
+		return real_dent;
+	}
+	/* Negative dentry: instantiate it. */
+	d_instantiate(real_dent, dent_inode);
+	return real_dent;
+
+eio_put_unm_err_out:
+	ntfs_error(vol->sb, "Illegal file name attribute. Run chkdsk.");
+	err = -EIO;
+put_unm_err_out:
+	put_attr_search_ctx(ctx);
+unm_err_out:
+	unmap_mft_record(READ, ni);
+name_err_out:
+	iput(dent_inode);
+	return ERR_PTR(err);
+   }
 }
 
+/*
+ * Inode operations for directories.
+ */
 struct inode_operations ntfs_dir_inode_ops = {
-	lookup:		ntfs_lookup,	/* lookup directory. */
+	lookup:		ntfs_lookup,	/* VFS: Lookup directory. */
 };
 

fs/ntfs/ntfs.h

@@ -96,9 +96,6 @@ extern kmem_cache_t *ntfs_inode_cache;
 extern kmem_cache_t *ntfs_big_inode_cache;
 extern kmem_cache_t *ntfs_attr_ctx_cache;
 
-/* The little endian Unicode string $I30 as a global constant. */
-extern const uchar_t I30[5];
-
 /* The various operations structs defined throughout the driver files. */
 extern struct super_operations ntfs_mount_sops;
 extern struct super_operations ntfs_sops;
@@ -223,10 +220,6 @@ extern inline s64 utc2ntfs(const time_t time);
 extern inline s64 get_current_ntfs_time(void);
 extern inline time_t ntfs2utc(const s64 time);
 
-/* From fs/ntfs/dir.c */
-extern u64 ntfs_lookup_inode_by_name(ntfs_inode *dir_ni, const uchar_t *uname,
-		const int uname_len);
-
 /* From fs/ntfs/unistr.c */
 extern BOOL ntfs_are_names_equal(const uchar_t *s1, size_t s1_len,
 		const uchar_t *s2, size_t s2_len,

fs/ntfs/super.c

@@ -52,17 +52,6 @@ const option_t on_errors_arr[] = {
 	{ 0,			NULL }
 };
 
-static const option_t readdir_opts_arr[] = {
-	{ SHOW_SYSTEM,	"system" },
-	{ SHOW_WIN32,	"win32" },
-	{ SHOW_WIN32,	"long" },
-	{ SHOW_DOS,	"dos" },
-	{ SHOW_DOS,	"short" },
-	{ SHOW_POSIX,	"posix" },
-	{ SHOW_ALL,	"all" },
-	{ 0,		NULL }
-};
-
 /**
  * simple_getbool -
  *
@@ -98,7 +87,8 @@ static BOOL parse_options(ntfs_volume *vol, char *opt)
 	uid_t uid = (uid_t)-1;
 	gid_t gid = (gid_t)-1;
 	mode_t fmask = (mode_t)-1, dmask = (mode_t)-1;
-	int mft_zone_multiplier = -1, on_errors = -1, readdir_opts = -1;
+	int mft_zone_multiplier = -1, on_errors = -1;
+	int show_sys_files = -1, case_sensitive = -1;
 	struct nls_table *nls_map = NULL, *old_nls;
 
 	/* I am lazy... (-8 */
@@ -120,6 +110,13 @@ static BOOL parse_options(ntfs_volume *vol, char *opt)
 		if (*v)							\
 			goto needs_val;					\
 	} 
+#define NTFS_GETOPT_BOOL(option, variable)				\
+	if (!strcmp(p, option)) {					\
+		BOOL val;						\
+		if (!simple_getbool(v, &val))				\
+			goto needs_bool;				\
+		variable = val;						\
+	} 
 #define NTFS_GETOPT_OPTIONS_ARRAY(option, variable, opt_array)		\
 	if (!strcmp(p, option)) {					\
 		int _i;							\
@@ -146,47 +143,16 @@ static BOOL parse_options(ntfs_volume *vol, char *opt)
 		else NTFS_GETOPT("umask", fmask = dmask)
 		else NTFS_GETOPT("fmask", fmask)
 		else NTFS_GETOPT("dmask", dmask)
-		else NTFS_GETOPT_WITH_DEFAULT("sloppy", sloppy, TRUE)
 		else NTFS_GETOPT("mft_zone_multiplier", mft_zone_multiplier)
+		else NTFS_GETOPT_WITH_DEFAULT("sloppy", sloppy, TRUE)
+		else NTFS_GETOPT_BOOL("show_sys_files", show_sys_files)
+		else NTFS_GETOPT_BOOL("case_sensitive", case_sensitive)
 		else NTFS_GETOPT_OPTIONS_ARRAY("errors", on_errors,
 				on_errors_arr)
-		else NTFS_GETOPT_OPTIONS_ARRAY("show_inodes", readdir_opts,
-				readdir_opts_arr)
-		else if (!strcmp(p, "show_sys_files")) {
-			BOOL val = FALSE;
-			ntfs_warning(vol->sb, "Option show_sys_files is "
-				   "deprecated. Please use option "
-				   "show_inodes=system in the future.");
-			if (!v || !*v)
-				val = TRUE;
-			else if (!simple_getbool(v, &val))
-				goto needs_bool;
-			if (val) {
-				if (readdir_opts == -1)
-					readdir_opts = 0;
-				readdir_opts |= SHOW_SYSTEM;
-			}
-		} else if (!strcmp(p, "posix")) {
-			BOOL val = FALSE;
-			ntfs_warning(vol->sb, "Option posix is deprecated. "
-				   "Please use option show_inodes=posix "
-				   "instead. Be aware that some userspace "
-				   "applications may be confused by this, "
-				   "since the short and long names of "
-				   "directory inodes will have the same inode "
-				   "numbers, yet each will only have a link "
-				   "count of 1 due to Linux not supporting "
-				   "directory hard links.");
-			if (!v || !*v)
-				goto needs_arg;
-			else if (!simple_getbool(v, &val))
-				goto needs_bool;
-			if (val) {
-				if (readdir_opts == -1)
-					readdir_opts = 0;
-				readdir_opts |= SHOW_POSIX;
-			}
-		} else if (!strcmp(p, "nls") || !strcmp(p, "iocharset")) {
+		else if (!strcmp(p, "posix") || !strcmp(p, "show_inodes"))
+			ntfs_warning(vol->sb, "Ignoring obsolete option %s.",
+					p);
+		else if (!strcmp(p, "nls") || !strcmp(p, "iocharset")) {
 			if (!strcmp(p, "iocharset"))
 				ntfs_warning(vol->sb, "Option iocharset is "
 						"deprecated. Please use "
@@ -232,6 +198,7 @@ static BOOL parse_options(ntfs_volume *vol, char *opt)
 				errors++;
 		}
 #undef NTFS_GETOPT_OPTIONS_ARRAY
+#undef NTFS_GETOPT_BOOL
 #undef NTFS_GETOPT
 #undef NTFS_GETOPT_WITH_DEFAULT
 	}
@@ -297,8 +264,18 @@ static BOOL parse_options(ntfs_volume *vol, char *opt)
 		vol->fmask = fmask;
 	if (dmask != (mode_t)-1)
 		vol->dmask = dmask;
-	if (readdir_opts != -1)
-		vol->readdir_opts = readdir_opts;
+	if (show_sys_files != -1) {
+		if (show_sys_files)
+			NVolSetShowSystemFiles(vol);
+		else
+			NVolClearShowSystemFiles(vol);
+	}
+	if (case_sensitive != -1) {
+		if (case_sensitive)
+			NVolSetCaseSensitive(vol);
+		else
+			NVolClearCaseSensitive(vol);
+	}
 	return TRUE;
 needs_arg:
 	ntfs_error(vol->sb, "The %s option requires an argument.", p);
@@ -464,7 +441,7 @@ static struct buffer_head *read_ntfs_boot_sector(struct super_block *sb,
 			ntfs_error(sb, "Primary boot sector is invalid.");
 	} else if (!silent)
 		ntfs_error(sb, read_err_str, "primary");
-	if (NTFS_SB(sb)->on_errors & ~ON_ERRORS_RECOVER) {
+	if (!(NTFS_SB(sb)->on_errors & ON_ERRORS_RECOVER)) {
 		if (bh_primary)
 			brelse(bh_primary);
 		if (!silent)
@@ -1492,6 +1469,7 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent)
 	vol->root_ino = NULL;
 	vol->secure_ino = NULL;
 	vol->uid = vol->gid = 0;
+	vol->flags = 0;
 	vol->on_errors = 0;
 	vol->mft_zone_multiplier = 0;
 	vol->nls_map = NULL;
@@ -1531,12 +1509,6 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent)
 	vol->fmask = 0177;
 	vol->dmask = 0077;
 
-	/*
-	 * Default is to show long file names (including POSIX file names), and
-	 * not to show system files and short file names.
-	 */
-	vol->readdir_opts = SHOW_WIN32;
-
 	/* Important to get the mount options dealt with now. */
 	if (!parse_options(vol, (char*)opt))
 		goto err_out_now;

fs/ntfs/unistr.c

@@ -333,7 +333,7 @@ int ntfs_ucstonls(const ntfs_volume *vol, const uchar_t *ins,
 		}
 		if (!ns) {
 			ns_len = ins_len * NLS_MAX_CHARSET_SIZE;
-			ns = (unsigned char*)kmalloc(ns_len, GFP_NOFS);
+			ns = (unsigned char*)kmalloc(ns_len + 1, GFP_NOFS);
 			if (!ns)
 				goto mem_err_out;
 		}
@@ -352,7 +352,7 @@ retry:			wc = nls->uni2char(le16_to_cpu(ins[i]), ns + o,
 						~63, GFP_NOFS);
 				if (tc) {
 					memcpy(tc, ns, ns_len);
-					ns_len = (ns_len + 64) & ~63;
+					ns_len = ((ns_len + 64) & ~63) - 1;
 					kfree(ns);
 					ns = tc;
 					goto retry;

fs/ntfs/volume.h

@@ -26,18 +26,30 @@
 
 #include "types.h"
 
-/* These are used to determine which inode names are returned by readdir(). */
+/*
+ * Defined bits for the flags field in the ntfs_volume structure.
+ */
 typedef enum {
-	SHOW_SYSTEM	= 1,
-	SHOW_WIN32	= 2,
-	SHOW_DOS	= 4,
-	SHOW_POSIX	= SHOW_WIN32 | SHOW_DOS,
-	SHOW_ALL	= SHOW_SYSTEM | SHOW_POSIX,
-} READDIR_OPTIONS;
+	NV_ShowSystemFiles,	/* 1: Return system files in ntfs_readdir(). */
+	NV_CaseSensitive,	/* 1: Treat file names as case sensitive and
+				      create filenames in the POSIX namespace.
+				      Otherwise be case insensitive and create
+				      file names in WIN32 namespace. */
+} ntfs_volume_flags;
+
+#define NVolShowSystemFiles(n_vol)	test_bit(NV_ShowSystemFiles,	\
+							&(n_vol)->flags)
+#define NVolSetShowSystemFiles(n_vol)	set_bit(NV_ShowSystemFiles,	\
+							&(n_vol)->flags)
+#define NVolClearShowSystemFiles(n_vol)	clear_bit(NV_ShowSystemFiles,	\
+							&(n_vol)->flags)
 
-#define RHideSystemFiles(x)	(!((x) & SHOW_SYSTEM))
-#define RHideLongNames(x)	(!((x) & SHOW_WIN32))
-#define RHideDosNames(x)	(!((x) & SHOW_DOS))
+#define NVolCaseSensitive(n_vol)	test_bit(NV_CaseSensitive,	\
+							&(n_vol)->flags)
+#define NVolSetCaseSensitive(n_vol)	set_bit(NV_CaseSensitive,	\
+							&(n_vol)->flags)
+#define NVolClearCaseSensitive(n_vol)	clear_bit(NV_CaseSensitive,	\
+							&(n_vol)->flags)
 
 /*
  * The NTFS in memory super block structure.
@@ -57,12 +69,12 @@ typedef struct {
 	LCN nr_blocks;			/* Number of NTFS_BLOCK_SIZE bytes
 					   sized blocks on the device. */
 	/* Configuration provided by user at mount time. */
+	unsigned long flags;		/* Miscellaneous flags, see above. */
 	uid_t uid;			/* uid that files will be mounted as. */
 	gid_t gid;			/* gid that files will be mounted as. */
 	mode_t fmask;			/* The mask for file permissions. */
 	mode_t dmask;			/* The mask for directory
 					   permissions. */
-	READDIR_OPTIONS readdir_opts;	/* Namespace of inode names to show. */
 	u8 mft_zone_multiplier;		/* Initial mft zone multiplier. */
 	u8 on_errors;			/* What to do on file system errors. */
 	/* NTFS bootsector provided information. */

include/asm-i386/processor.h

@@ -60,6 +60,7 @@ struct cpuinfo_x86 {
 #define X86_VENDOR_RISE 6
 #define X86_VENDOR_TRANSMETA 7
 #define X86_VENDOR_NSC 8
+#define X86_VENDOR_NUM 9
 #define X86_VENDOR_UNKNOWN 0xff
 
 /*