Commit 0b17d0ed authored by Hermann Pitton's avatar Hermann Pitton Committed by Mauro Carvalho Chehab

V4L/DVB (8319): saa7134: Add support for analog only ASUSTeK P7131

saa7134: add a separate entry for the ASUSTeK P7131 analog only
         and do some eeprom detection to escape from the TVFM7135
         with the same PCI subsystem on auto detection.
Signed-off-by: default avatarHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent cd257a6f
......@@ -144,3 +144,4 @@
143 -> Beholder BeholdTV M63 [5ace:6191]
144 -> Beholder BeholdTV M6 Extra [5ace:6193]
145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636]
146 -> ASUSTeK P7131 Analog
......@@ -3520,6 +3520,39 @@ struct saa7134_board saa7134_boards[] = {
.gpio = 0x0200000,
},
},
[SAA7134_BOARD_ASUSTeK_P7131_ANALOG] = {
.name = "ASUSTeK P7131 Analog",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.gpiomask = 1 << 21,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
.gpio = 0x0000000,
}, {
.name = name_comp1,
.vmux = 3,
.amux = LINE2,
}, {
.name = name_comp2,
.vmux = 0,
.amux = LINE2,
}, {
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
} },
.radio = {
.name = name_radio,
.amux = TV,
.gpio = 0x0200000,
},
},
[SAA7134_BOARD_SABRENT_TV_PCB05] = {
.name = "Sabrent PCMCIA TV-PCB05",
.audio_clock = 0x00187de7,
......@@ -5605,6 +5638,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
case SAA7134_BOARD_FLYDVBT_LR301:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
case SAA7134_BOARD_ASUSTeK_P7131_ANALOG:
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_PROTEUS_2309:
case SAA7134_BOARD_AVERMEDIA_A16AR:
......@@ -5941,6 +5975,15 @@ int saa7134_board_init2(struct saa7134_dev *dev)
i2c_transfer(&dev->i2c_adap, &msg, 1);
break;
}
case SAA7134_BOARD_ASUSTeK_TVFM7135:
/* The card below is detected as card=53, but is different */
if (dev->autodetected && (dev->eedata[0x27] == 0x03)) {
dev->board = SAA7134_BOARD_ASUSTeK_P7131_ANALOG;
printk(KERN_INFO "%s: P7131 analog only, using "
"entry of %s\n",
dev->name, saa7134_boards[dev->board].name);
}
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
hauppauge_eeprom(dev, dev->eedata+0x80);
/* break intentionally omitted */
......
......@@ -409,6 +409,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
case SAA7134_BOARD_ASUSTeK_P7131_ANALOG:
ir_codes = ir_codes_asus_pc39;
mask_keydown = 0x0040000;
rc5_gpio = 1;
......
......@@ -267,6 +267,7 @@ struct saa7134_format {
#define SAA7134_BOARD_BEHOLD_M63 143
#define SAA7134_BOARD_BEHOLD_M6_EXTRA 144
#define SAA7134_BOARD_AVERMEDIA_M103 145
#define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment