Commit 0c3351d4 authored by John Stultz's avatar John Stultz Committed by Ingo Molnar

seqlock: Use raw_ prefix instead of _no_lockdep

Linus disliked the _no_lockdep() naming, so instead
use the more-consistent raw_* prefix to the non-lockdep
enabled seqcount methods.

This also adds raw_ methods for the write operations
as well, which will be utilized in a following patch.
Acked-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarJohn Stultz <john.stultz@linaro.org>
Signed-off-by: default avatarPeter Zijlstra <peterz@infradead.org>
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Willy Tarreau <w@1wt.eu>
Link: http://lkml.kernel.org/r/1388704274-5278-1-git-send-email-john.stultz@linaro.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent 228fdc08
...@@ -178,7 +178,7 @@ notrace static int __always_inline do_realtime(struct timespec *ts) ...@@ -178,7 +178,7 @@ notrace static int __always_inline do_realtime(struct timespec *ts)
ts->tv_nsec = 0; ts->tv_nsec = 0;
do { do {
seq = read_seqcount_begin_no_lockdep(&gtod->seq); seq = raw_read_seqcount_begin(&gtod->seq);
mode = gtod->clock.vclock_mode; mode = gtod->clock.vclock_mode;
ts->tv_sec = gtod->wall_time_sec; ts->tv_sec = gtod->wall_time_sec;
ns = gtod->wall_time_snsec; ns = gtod->wall_time_snsec;
...@@ -198,7 +198,7 @@ notrace static int do_monotonic(struct timespec *ts) ...@@ -198,7 +198,7 @@ notrace static int do_monotonic(struct timespec *ts)
ts->tv_nsec = 0; ts->tv_nsec = 0;
do { do {
seq = read_seqcount_begin_no_lockdep(&gtod->seq); seq = raw_read_seqcount_begin(&gtod->seq);
mode = gtod->clock.vclock_mode; mode = gtod->clock.vclock_mode;
ts->tv_sec = gtod->monotonic_time_sec; ts->tv_sec = gtod->monotonic_time_sec;
ns = gtod->monotonic_time_snsec; ns = gtod->monotonic_time_snsec;
...@@ -214,7 +214,7 @@ notrace static int do_realtime_coarse(struct timespec *ts) ...@@ -214,7 +214,7 @@ notrace static int do_realtime_coarse(struct timespec *ts)
{ {
unsigned long seq; unsigned long seq;
do { do {
seq = read_seqcount_begin_no_lockdep(&gtod->seq); seq = raw_read_seqcount_begin(&gtod->seq);
ts->tv_sec = gtod->wall_time_coarse.tv_sec; ts->tv_sec = gtod->wall_time_coarse.tv_sec;
ts->tv_nsec = gtod->wall_time_coarse.tv_nsec; ts->tv_nsec = gtod->wall_time_coarse.tv_nsec;
} while (unlikely(read_seqcount_retry(&gtod->seq, seq))); } while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
...@@ -225,7 +225,7 @@ notrace static int do_monotonic_coarse(struct timespec *ts) ...@@ -225,7 +225,7 @@ notrace static int do_monotonic_coarse(struct timespec *ts)
{ {
unsigned long seq; unsigned long seq;
do { do {
seq = read_seqcount_begin_no_lockdep(&gtod->seq); seq = raw_read_seqcount_begin(&gtod->seq);
ts->tv_sec = gtod->monotonic_time_coarse.tv_sec; ts->tv_sec = gtod->monotonic_time_coarse.tv_sec;
ts->tv_nsec = gtod->monotonic_time_coarse.tv_nsec; ts->tv_nsec = gtod->monotonic_time_coarse.tv_nsec;
} while (unlikely(read_seqcount_retry(&gtod->seq, seq))); } while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
......
...@@ -117,15 +117,15 @@ static inline unsigned __read_seqcount_begin(const seqcount_t *s) ...@@ -117,15 +117,15 @@ static inline unsigned __read_seqcount_begin(const seqcount_t *s)
} }
/** /**
* read_seqcount_begin_no_lockdep - start seq-read critical section w/o lockdep * raw_read_seqcount_begin - start seq-read critical section w/o lockdep
* @s: pointer to seqcount_t * @s: pointer to seqcount_t
* Returns: count to be passed to read_seqcount_retry * Returns: count to be passed to read_seqcount_retry
* *
* read_seqcount_begin_no_lockdep opens a read critical section of the given * raw_read_seqcount_begin opens a read critical section of the given
* seqcount, but without any lockdep checking. Validity of the critical * seqcount, but without any lockdep checking. Validity of the critical
* section is tested by checking read_seqcount_retry function. * section is tested by checking read_seqcount_retry function.
*/ */
static inline unsigned read_seqcount_begin_no_lockdep(const seqcount_t *s) static inline unsigned raw_read_seqcount_begin(const seqcount_t *s)
{ {
unsigned ret = __read_seqcount_begin(s); unsigned ret = __read_seqcount_begin(s);
smp_rmb(); smp_rmb();
...@@ -144,7 +144,7 @@ static inline unsigned read_seqcount_begin_no_lockdep(const seqcount_t *s) ...@@ -144,7 +144,7 @@ static inline unsigned read_seqcount_begin_no_lockdep(const seqcount_t *s)
static inline unsigned read_seqcount_begin(const seqcount_t *s) static inline unsigned read_seqcount_begin(const seqcount_t *s)
{ {
seqcount_lockdep_reader_access(s); seqcount_lockdep_reader_access(s);
return read_seqcount_begin_no_lockdep(s); return raw_read_seqcount_begin(s);
} }
/** /**
...@@ -206,14 +206,26 @@ static inline int read_seqcount_retry(const seqcount_t *s, unsigned start) ...@@ -206,14 +206,26 @@ static inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
} }
static inline void raw_write_seqcount_begin(seqcount_t *s)
{
s->sequence++;
smp_wmb();
}
static inline void raw_write_seqcount_end(seqcount_t *s)
{
smp_wmb();
s->sequence++;
}
/* /*
* Sequence counter only version assumes that callers are using their * Sequence counter only version assumes that callers are using their
* own mutexing. * own mutexing.
*/ */
static inline void write_seqcount_begin_nested(seqcount_t *s, int subclass) static inline void write_seqcount_begin_nested(seqcount_t *s, int subclass)
{ {
s->sequence++; raw_write_seqcount_begin(s);
smp_wmb();
seqcount_acquire(&s->dep_map, subclass, 0, _RET_IP_); seqcount_acquire(&s->dep_map, subclass, 0, _RET_IP_);
} }
...@@ -225,8 +237,7 @@ static inline void write_seqcount_begin(seqcount_t *s) ...@@ -225,8 +237,7 @@ static inline void write_seqcount_begin(seqcount_t *s)
static inline void write_seqcount_end(seqcount_t *s) static inline void write_seqcount_end(seqcount_t *s)
{ {
seqcount_release(&s->dep_map, 1, _RET_IP_); seqcount_release(&s->dep_map, 1, _RET_IP_);
smp_wmb(); raw_write_seqcount_end(s);
s->sequence++;
} }
/** /**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment