Merge luckyluke.devel.redhat.com:/mnt/cvs/BK/linus-2.5

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5

Documentation/networking/ewrk3.txt

@@ -24,6 +24,7 @@ sequences). To utilise this ability, you have to do 8 things:
     kernel with the ewrk3 configuration turned off and reboot.
     5) insmod ewrk3.o
           [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y]
+          [Adam Kropelin: Multiple cards now supported by irq=x1,x2 io=y1,y2]
     6) run the net startup bits for your new eth?? interface manually 
     (usually /etc/rc.inet[12] at boot time). 
     7) enjoy!

drivers/net/3c509.c

@@ -49,11 +49,13 @@
 			- Power Management support
 		v1.18c 1Mar2002 David Ruggiero <jdr@farfalle.com>
 			- Full duplex support
+		v1.19  16Oct2002 Zwane Mwaikambo <zwane@linuxpower.ca>
+			- Additional ethtool features
 */
 
 #define DRV_NAME	"3c509"
-#define DRV_VERSION	"1.18c"
-#define DRV_RELDATE	"1Mar2002"
+#define DRV_VERSION	"1.19"
+#define DRV_RELDATE	"16Oct2002"
 
 /* A few values that may be tweaked. */
 
@@ -140,6 +142,8 @@ enum RxFilter {
 #define TX_STATUS 	0x0B
 #define TX_FREE		0x0C		/* Remaining free bytes in Tx buffer. */
 
+#define WN0_CONF_CTRL	0x04		/* Window 0: Configuration control register */
+#define WN0_ADDR_CONF	0x06		/* Window 0: Address configuration register */
 #define WN0_IRQ		0x08		/* Window 0: Set IRQ line in bits 12-15. */
 #define WN4_MEDIA	0x0A		/* Window 4: Various transcvr/media bits. */
 #define	MEDIA_TP	0x00C0		/* Enable link beat and jabber for 10baseT. */
@@ -981,6 +985,119 @@ el3_close(struct net_device *dev)
 	return 0;
 }
 
+static int 
+el3_link_ok(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	u16 tmp;
+
+	EL3WINDOW(4);
+	tmp = inw(ioaddr + WN4_MEDIA);
+	EL3WINDOW(1);
+	return tmp & (1<<11);
+}
+
+static int
+el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	u16 tmp;
+	int ioaddr = dev->base_addr;
+	
+	EL3WINDOW(0);
+	/* obtain current tranceiver via WN4_MEDIA? */	
+	tmp = inw(ioaddr + WN0_ADDR_CONF);
+	ecmd->transceiver = XCVR_INTERNAL;
+	switch (tmp >> 14) {
+	case 0:
+		ecmd->port = PORT_TP;
+		break;
+	case 1:
+		ecmd->port = PORT_AUI;
+		ecmd->transceiver = XCVR_EXTERNAL;
+		break;
+	case 3:
+		ecmd->port = PORT_BNC;
+	default:
+		break;
+	}
+
+	ecmd->duplex = DUPLEX_HALF;
+	ecmd->supported = 0;
+	tmp = inw(ioaddr + WN0_CONF_CTRL);
+	if (tmp & (1<<13))
+		ecmd->supported |= SUPPORTED_AUI;
+	if (tmp & (1<<12))
+		ecmd->supported |= SUPPORTED_BNC;
+	if (tmp & (1<<9)) {
+		ecmd->supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half |
+				SUPPORTED_10baseT_Full;	/* hmm... */
+		EL3WINDOW(4);
+		tmp = inw(ioaddr + WN4_NETDIAG);
+		if (tmp & FD_ENABLE)
+			ecmd->duplex = DUPLEX_FULL;
+	}
+
+	ecmd->speed = SPEED_10;
+	EL3WINDOW(1);
+	return 0;
+}
+
+static int
+el3_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	u16 tmp;
+	int ioaddr = dev->base_addr;
+
+	if (ecmd->speed != SPEED_10)
+		return -EINVAL;
+	if ((ecmd->duplex != DUPLEX_HALF) && (ecmd->duplex != DUPLEX_FULL))
+		return -EINVAL;
+	if ((ecmd->transceiver != XCVR_INTERNAL) && (ecmd->transceiver != XCVR_EXTERNAL))
+		return -EINVAL;
+
+	/* change XCVR type */
+	EL3WINDOW(0);
+	tmp = inw(ioaddr + WN0_ADDR_CONF);
+	switch (ecmd->port) {
+	case PORT_TP:
+		tmp &= ~(3<<14);
+		dev->if_port = 0;
+		break;
+	case PORT_AUI:
+		tmp |= (1<<14);
+		dev->if_port = 1;
+		break;
+	case PORT_BNC:
+		tmp |= (3<<14);
+		dev->if_port = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	outw(tmp, ioaddr + WN0_ADDR_CONF);
+	if (dev->if_port == 3) {
+		/* fire up the DC-DC convertor if BNC gets enabled */
+		tmp = inw(ioaddr + WN0_ADDR_CONF);
+		if (tmp & (3 << 14)) {
+			outw(StartCoax, ioaddr + EL3_CMD);
+			udelay(800);
+		} else
+			return -EIO;
+	}
+
+	EL3WINDOW(4);
+	tmp = inw(ioaddr + WN4_NETDIAG);
+	if (ecmd->duplex == DUPLEX_FULL)
+		tmp |= FD_ENABLE;
+	else
+		tmp &= ~FD_ENABLE;
+	outw(tmp, ioaddr + WN4_NETDIAG);
+	EL3WINDOW(1);
+
+	return 0;
+}
+
 /**
  * netdev_ethtool_ioctl: Handle network interface SIOCETHTOOL ioctls
  * @dev: network interface on which out-of-band action is to be performed
@@ -989,9 +1106,11 @@ el3_close(struct net_device *dev)
  * Process the various commands of the SIOCETHTOOL interface.
  */
 
-static int netdev_ethtool_ioctl (struct net_device *dev, void *useraddr)
+static int
+netdev_ethtool_ioctl (struct net_device *dev, void *useraddr)
 {
 	u32 ethcmd;
+	struct el3_private *lp = dev->priv;
 
 	/* dev_ioctl() in ../../net/core/dev.c has already checked
 	   capable(CAP_NET_ADMIN), so don't bother with that here.  */
@@ -1010,6 +1129,41 @@ static int netdev_ethtool_ioctl (struct net_device *dev, void *useraddr)
 		return 0;
 	}
 
+	/* get settings */
+	case ETHTOOL_GSET: {
+		int ret;
+		struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+		spin_lock_irq(&lp->lock);
+		ret = el3_netdev_get_ecmd(dev, &ecmd);
+		spin_unlock_irq(&lp->lock);
+		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
+			return -EFAULT;
+		return ret;
+	}
+
+	/* set settings */
+	case ETHTOOL_SSET: {
+		int ret;
+		struct ethtool_cmd ecmd;
+		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
+			return -EFAULT;
+		spin_lock_irq(&lp->lock);
+		ret = el3_netdev_set_ecmd(dev, &ecmd);
+		spin_unlock_irq(&lp->lock);
+		return ret;
+	}
+
+	/* get link status */
+	case ETHTOOL_GLINK: {
+		struct ethtool_value edata = { ETHTOOL_GLINK };
+		spin_lock_irq(&lp->lock);
+		edata.data = el3_link_ok(dev);
+		spin_unlock_irq(&lp->lock);
+		if (copy_to_user(useraddr, &edata, sizeof(edata)))
+			return -EFAULT;
+		return 0;
+	}
+
 	/* get message-level */
 	case ETHTOOL_GMSGLVL: {
 		struct ethtool_value edata = {ETHTOOL_GMSGLVL};
@@ -1043,7 +1197,8 @@ static int netdev_ethtool_ioctl (struct net_device *dev, void *useraddr)
  * Process the various out-of-band ioctls passed to this driver.
  */
 
-static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+static int
+netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	int rc = 0;
 
@@ -1060,7 +1215,8 @@ static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 	return rc;
 }
 
-static void el3_down(struct net_device *dev)
+static void
+el3_down(struct net_device *dev)
 {
 	int ioaddr = dev->base_addr;
 
@@ -1077,7 +1233,7 @@ static void el3_down(struct net_device *dev)
 		/* Turn off thinnet power.  Green! */
 		outw(StopCoax, ioaddr + EL3_CMD);
 	else if (dev->if_port == 0) {
-		/* Disable link beat and jabber, if_port may change ere next open(). */
+		/* Disable link beat and jabber, if_port may change here next open(). */
 		EL3WINDOW(4);
 		outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA);
 	}
@@ -1087,7 +1243,8 @@ static void el3_down(struct net_device *dev)
 	update_stats(dev);
 }
 
-static void el3_up(struct net_device *dev)
+static void
+el3_up(struct net_device *dev)
 {
 	int i, sw_info, net_diag;
 	int ioaddr = dev->base_addr;
@@ -1176,7 +1333,8 @@ static void el3_up(struct net_device *dev)
 /* Power Management support functions */
 #ifdef CONFIG_PM
 
-static int el3_suspend(struct pm_dev *pdev)
+static int
+el3_suspend(struct pm_dev *pdev)
 {
 	unsigned long flags;
 	struct net_device *dev;
@@ -1202,7 +1360,8 @@ static int el3_suspend(struct pm_dev *pdev)
 	return 0;
 }
 
-static int el3_resume(struct pm_dev *pdev)
+static int
+el3_resume(struct pm_dev *pdev)
 {
 	unsigned long flags;
 	struct net_device *dev;
@@ -1228,7 +1387,8 @@ static int el3_resume(struct pm_dev *pdev)
 	return 0;
 }
 
-static int el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
+static int
+el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
 {
 	switch (rqst) {
 		case PM_SUSPEND:

drivers/net/ewrk3.c

@@ -76,6 +76,7 @@
    kernel with the ewrk3 configuration turned off and reboot.
    5) insmod ewrk3.o
    [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y]
+   [Adam Kropelin: now accepts irq=x1,x2 io=y1,y2 for multiple cards]
    6) run the net startup bits for your new eth?? interface manually
    (usually /etc/rc.inet[12] at boot time).
    7) enjoy!
@@ -134,6 +135,8 @@
    0.43    16-Aug-96   Update alloc_device() to conform to de4x5.c
    0.44    08-Nov-01   use library crc32 functions <Matt_Domsch@dell.com>
    0.45    19-Jul-02   fix unaligned access on alpha <martin@bruli.net>
+   0.46    10-Oct-02   cli/sti removal <VDA@port.imtp.ilyichevsk.odessa.ua>
+   Multiple NIC support when module <akropel1@rochester.rr.com>
 
    =========================================================================
  */
@@ -167,7 +170,7 @@
 #include "ewrk3.h"
 
 static char version[] __initdata =
-"ewrk3.c:v0.43a 2001/02/04 davies@maniac.ultranet.com\n";
+"ewrk3.c:v0.46 2002/10/09 davies@maniac.ultranet.com\n";
 
 #ifdef EWRK3_DEBUG
 static int ewrk3_debug = EWRK3_DEBUG;
@@ -196,6 +199,7 @@ static int ewrk3_debug = 1;
 #define EWRK3_IOP_INC 0x20	/* I/O address increment */
 #define EWRK3_TOTAL_SIZE 0x20	/* required I/O address length */
 
+/* If you change this, remember to also change MODULE_PARM array limits */
 #ifndef MAX_NUM_EWRK3S
 #define MAX_NUM_EWRK3S 21
 #endif
@@ -1716,6 +1720,11 @@ static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		break;
 	case EWRK3_SET_MCA:	/* Set a multicast address */
 		if (capable(CAP_NET_ADMIN)) {
+			if (ioc->len > 1024)
+			{
+				status = -EINVAL;
+				break;
+			}
 			if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN * ioc->len)) {
 				status = -EFAULT;
 				break;
@@ -1843,35 +1852,62 @@ static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 }
 
 #ifdef MODULE
-static struct net_device thisEthwrk;
-static int io = 0x300;		/* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */
-static int irq = 5;		/* or use the insmod io= irq= options           */
+static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S];
+static int ndevs;
+static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, };		/* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */
+static int irq[MAX_NUM_EWRK3S+1] = { 5, 0, };		/* or use the insmod io= irq= options           */
 
-MODULE_PARM(io, "i");
-MODULE_PARM(irq, "i");
-MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address");
-MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number");
+/* '21' below should really be 'MAX_NUM_EWRK3S' */
+MODULE_PARM(io, "0-21i");
+MODULE_PARM(irq, "0-21i");
+MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address(es)");
+MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number(s)");
 
 int init_module(void)
 {
-	thisEthwrk.base_addr = io;
-	thisEthwrk.irq = irq;
-	thisEthwrk.init = ewrk3_probe;
-	if (register_netdev(&thisEthwrk) != 0)
-		return -EIO;
-	return 0;
+	int i=0;
+
+	while( io[i] && irq[i] ) {
+		ewrk3_devs[ndevs] = kmalloc(sizeof(struct net_device), GFP_KERNEL);
+		if (!ewrk3_devs[ndevs])
+			goto error; 
+		memset(ewrk3_devs[ndevs], 0, sizeof(struct net_device));
+		ewrk3_devs[ndevs]->base_addr = io[i];
+		ewrk3_devs[ndevs]->irq = irq[i];
+		ewrk3_devs[ndevs]->init = ewrk3_probe;
+
+		if (register_netdev(ewrk3_devs[ndevs]) == 0)
+			ndevs++;
+		else
+			kfree(ewrk3_devs[ndevs]);
+
+		i++;
+	}
+
+	return ndevs ? 0 : -EIO;
+
+error:
+	cleanup_module();
+	return -ENOMEM;
 }
 
 void cleanup_module(void)
 {
-	unregister_netdev(&thisEthwrk);
-	if (thisEthwrk.priv) {
-		kfree(thisEthwrk.priv);
-		thisEthwrk.priv = NULL;
+	int i;
+
+	for( i=0; i<ndevs; i++ )
+	{
+		unregister_netdev(ewrk3_devs[i]);
+		if (ewrk3_devs[i]->priv) {
+			kfree(ewrk3_devs[i]->priv);
+			ewrk3_devs[i]->priv = NULL;
 		}
-	thisEthwrk.irq = 0;
+		ewrk3_devs[i]->irq = 0;
 
-	release_region(thisEthwrk.base_addr, EWRK3_TOTAL_SIZE);
+		release_region(ewrk3_devs[i]->base_addr, EWRK3_TOTAL_SIZE);
+		kfree(ewrk3_devs[i]);
+		ewrk3_devs[i] = NULL;
+	}
 }
 #endif				/* MODULE */
 MODULE_LICENSE("GPL");

drivers/net/mii.c

@@ -243,7 +243,7 @@ unsigned int mii_check_media (struct mii_if_info *mii,
 
 	/* figure out media and duplex from advertise and LPA values */
 	media = mii_nway_result(lpa & advertise);
-	duplex = (media & (ADVERTISE_100FULL | ADVERTISE_10FULL)) ? 1 : 0;
+	duplex = (media & ADVERTISE_FULL) ? 1 : 0;
 
 	if (ok_to_print)
 		printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n",

drivers/net/tokenring/tmspci.c

@@ -253,7 +253,7 @@ static int __init tms_pci_init (void)
 	return 0;
 }
 
-static void __devexit tms_pci_rmmod (void)
+static void __exit tms_pci_rmmod (void)
 {
 	pci_unregister_driver (&tms_pci_driver);
 }