Commit 0ca1268e authored by Lucy McCoy's avatar Lucy McCoy Committed by Greg Kroah-Hartman

USB Serial Keyspan: add support for USA-49WG & USA-28XG

Add support for Keyspan adapters: USA-49WG and USA-28XG
Signed-off-by: default avatarLucy P. McCoy <lucy@keyspan.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 87e71b47
...@@ -115,12 +115,13 @@ static int debug; ...@@ -115,12 +115,13 @@ static int debug;
/* /*
* Version Information * Version Information
*/ */
#define DRIVER_VERSION "v1.1.4" #define DRIVER_VERSION "v1.1.5"
#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu" #define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
#define DRIVER_DESC "Keyspan USB to Serial Converter Driver" #define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
#define INSTAT_BUFLEN 32 #define INSTAT_BUFLEN 32
#define GLOCONT_BUFLEN 64 #define GLOCONT_BUFLEN 64
#define INDAT49W_BUFLEN 512
/* Per device and per port private data */ /* Per device and per port private data */
struct keyspan_serial_private { struct keyspan_serial_private {
...@@ -129,9 +130,15 @@ struct keyspan_serial_private { ...@@ -129,9 +130,15 @@ struct keyspan_serial_private {
struct urb *instat_urb; struct urb *instat_urb;
char instat_buf[INSTAT_BUFLEN]; char instat_buf[INSTAT_BUFLEN];
/* added to support 49wg, where data from all 4 ports comes in on 1 EP */
/* and high-speed supported */
struct urb *indat_urb;
char indat_buf[INDAT49W_BUFLEN];
/* XXX this one probably will need a lock */ /* XXX this one probably will need a lock */
struct urb *glocont_urb; struct urb *glocont_urb;
char glocont_buf[GLOCONT_BUFLEN]; char glocont_buf[GLOCONT_BUFLEN];
char ctrl_buf[8]; // for EP0 control message
}; };
struct keyspan_port_private { struct keyspan_port_private {
...@@ -179,12 +186,13 @@ struct keyspan_port_private { ...@@ -179,12 +186,13 @@ struct keyspan_port_private {
/* Include Keyspan message headers. All current Keyspan Adapters /* Include Keyspan message headers. All current Keyspan Adapters
make use of one of four message formats which are referred make use of one of five message formats which are referred
to as USA-26, USA-28 and USA-49, USA-90 by Keyspan and within this driver. */ to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and within this driver. */
#include "keyspan_usa26msg.h" #include "keyspan_usa26msg.h"
#include "keyspan_usa28msg.h" #include "keyspan_usa28msg.h"
#include "keyspan_usa49msg.h" #include "keyspan_usa49msg.h"
#include "keyspan_usa90msg.h" #include "keyspan_usa90msg.h"
#include "keyspan_usa67msg.h"
/* Functions used by new usb-serial code. */ /* Functions used by new usb-serial code. */
...@@ -850,6 +858,82 @@ static void usa49_indat_callback(struct urb *urb) ...@@ -850,6 +858,82 @@ static void usa49_indat_callback(struct urb *urb)
} }
} }
static void usa49wg_indat_callback(struct urb *urb)
{
int i, len, x, err;
struct usb_serial *serial;
struct usb_serial_port *port;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
dbg ("%s", __FUNCTION__);
serial = urb->context;
if (urb->status) {
dbg("%s - nonzero status: %x", __FUNCTION__, urb->status);
return;
}
/* inbound data is in the form P#, len, status, data */
i = 0;
len = 0;
if (urb->actual_length) {
while (i < urb->actual_length) {
/* Check port number from message*/
if (data[i] >= serial->num_ports) {
dbg ("%s - Unexpected port number %d",
__FUNCTION__, data[i]);
return;
}
port = serial->port[data[i++]];
tty = port->tty;
len = data[i++];
/* 0x80 bit is error flag */
if ((data[i] & 0x80) == 0) {
/* no error on any byte */
i++;
for (x = 1; x < len ; ++x)
if (port->open_count)
tty_insert_flip_char(tty,
data[i++], 0);
else
i++;
} else {
/*
* some bytes had errors, every byte has status
*/
for (x = 0; x + 1 < len; x += 2) {
int stat = data[i], flag = 0;
if (stat & RXERROR_OVERRUN)
flag |= TTY_OVERRUN;
if (stat & RXERROR_FRAMING)
flag |= TTY_FRAME;
if (stat & RXERROR_PARITY)
flag |= TTY_PARITY;
/* XXX should handle break (0x10) */
if (port->open_count)
tty_insert_flip_char(tty,
data[i+1], flag);
i += 2;
}
}
if (port->open_count)
tty_flip_buffer_push(tty);
}
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
}
/* not used, usa-49 doesn't have per-port control endpoints */ /* not used, usa-49 doesn't have per-port control endpoints */
static void usa49_outcont_callback(struct urb *urb) static void usa49_outcont_callback(struct urb *urb)
{ {
...@@ -869,7 +953,6 @@ static void usa90_indat_callback(struct urb *urb) ...@@ -869,7 +953,6 @@ static void usa90_indat_callback(struct urb *urb)
endpoint = usb_pipeendpoint(urb->pipe); endpoint = usb_pipeendpoint(urb->pipe);
if (urb->status) { if (urb->status) {
dbg("%s - nonzero status: %x on endpoint %d.", dbg("%s - nonzero status: %x on endpoint %d.",
__FUNCTION__, urb->status, endpoint); __FUNCTION__, urb->status, endpoint);
...@@ -995,6 +1078,87 @@ static void usa90_outcont_callback(struct urb *urb) ...@@ -995,6 +1078,87 @@ static void usa90_outcont_callback(struct urb *urb)
} }
} }
/* Status messages from the 28xg */
static void usa67_instat_callback(struct urb *urb)
{
int err;
unsigned char *data = urb->transfer_buffer;
struct keyspan_usa67_portStatusMessage *msg;
struct usb_serial *serial;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
int old_dcd_state;
dbg ("%s", __FUNCTION__);
serial = urb->context;
if (urb->status) {
dbg("%s - nonzero status: %x", __FUNCTION__, urb->status);
return;
}
if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) {
dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
return;
}
/* Now do something useful with the data */
msg = (struct keyspan_usa67_portStatusMessage *)data;
/* Check port number from message and retrieve private data */
if (msg->port >= serial->num_ports) {
dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
return;
}
port = serial->port[msg->port];
p_priv = usb_get_serial_port_data(port);
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
if (port->tty && !C_CLOCAL(port->tty)
&& old_dcd_state != p_priv->dcd_state) {
if (old_dcd_state)
tty_hangup(port->tty);
/* else */
/* wake_up_interruptible(&p_priv->open_wait); */
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
}
static void usa67_glocont_callback(struct urb *urb)
{
struct usb_serial *serial;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
int i;
dbg ("%s", __FUNCTION__);
serial = urb->context;
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
dbg ("%s - sending setup", __FUNCTION__);
keyspan_usa67_send_setup(serial, port,
p_priv->resend_cont - 1);
break;
}
}
}
static int keyspan_write_room (struct usb_serial_port *port) static int keyspan_write_room (struct usb_serial_port *port)
{ {
struct keyspan_port_private *p_priv; struct keyspan_port_private *p_priv;
...@@ -1311,6 +1475,11 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint, ...@@ -1311,6 +1475,11 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint,
return NULL; return NULL;
} }
if (endpoint == 0) {
/* control EP filled in when used */
return urb;
}
ep_desc = find_ep(serial, endpoint); ep_desc = find_ep(serial, endpoint);
if (!ep_desc) { if (!ep_desc) {
/* leak the urb, something's wrong and the callers don't care */ /* leak the urb, something's wrong and the callers don't care */
...@@ -1380,6 +1549,14 @@ static struct callbacks { ...@@ -1380,6 +1549,14 @@ static struct callbacks {
.outdat_callback = usa2x_outdat_callback, .outdat_callback = usa2x_outdat_callback,
.inack_callback = usa28_inack_callback, .inack_callback = usa28_inack_callback,
.outcont_callback = usa90_outcont_callback, .outcont_callback = usa90_outcont_callback,
}, {
/* msg_usa67 callbacks */
.instat_callback = usa67_instat_callback,
.glocont_callback = usa67_glocont_callback,
.indat_callback = usa26_indat_callback,
.outdat_callback = usa2x_outdat_callback,
.inack_callback = usa26_inack_callback,
.outcont_callback = usa26_outcont_callback,
} }
}; };
...@@ -1410,6 +1587,11 @@ static void keyspan_setup_urbs(struct usb_serial *serial) ...@@ -1410,6 +1587,11 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
serial, s_priv->instat_buf, INSTAT_BUFLEN, serial, s_priv->instat_buf, INSTAT_BUFLEN,
cback->instat_callback); cback->instat_callback);
s_priv->indat_urb = keyspan_setup_urb
(serial, d_details->indat_endpoint, USB_DIR_IN,
serial, s_priv->indat_buf, INDAT49W_BUFLEN,
usa49wg_indat_callback);
s_priv->glocont_urb = keyspan_setup_urb s_priv->glocont_urb = keyspan_setup_urb
(serial, d_details->glocont_endpoint, USB_DIR_OUT, (serial, d_details->glocont_endpoint, USB_DIR_OUT,
serial, s_priv->glocont_buf, GLOCONT_BUFLEN, serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
...@@ -1685,8 +1867,8 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, ...@@ -1685,8 +1867,8 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
} }
/* Save reset port val for resend. /* Save reset port val for resend.
Don't overwrite resend for close condition. */ Don't overwrite resend for open/close condition. */
if (p_priv->resend_cont != 3) if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1; p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) { if (this_urb->status == -EINPROGRESS) {
/* dbg ("%s - already writing", __FUNCTION__); */ /* dbg ("%s - already writing", __FUNCTION__); */
...@@ -1836,8 +2018,8 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, ...@@ -1836,8 +2018,8 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
} }
/* Save reset port val for resend. /* Save reset port val for resend.
Don't overwrite resend for close condition. */ Don't overwrite resend for open/close condition. */
if (p_priv->resend_cont != 3) if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1; p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) { if (this_urb->status == -EINPROGRESS) {
dbg ("%s already writing", __FUNCTION__); dbg ("%s already writing", __FUNCTION__);
...@@ -1941,10 +2123,10 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, ...@@ -1941,10 +2123,10 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
int reset_port) int reset_port)
{ {
struct keyspan_usa49_portControlMessage msg; struct keyspan_usa49_portControlMessage msg;
struct usb_ctrlrequest *dr = NULL;
struct keyspan_serial_private *s_priv; struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv; struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details; const struct keyspan_device_details *d_details;
int glocont_urb;
struct urb *this_urb; struct urb *this_urb;
int err, device_port; int err, device_port;
...@@ -1954,7 +2136,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, ...@@ -1954,7 +2136,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
p_priv = usb_get_serial_port_data(port); p_priv = usb_get_serial_port_data(port);
d_details = s_priv->device_details; d_details = s_priv->device_details;
glocont_urb = d_details->glocont_endpoint;
this_urb = s_priv->glocont_urb; this_urb = s_priv->glocont_urb;
/* Work out which port within the device is being setup */ /* Work out which port within the device is being setup */
...@@ -1969,9 +2150,10 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, ...@@ -1969,9 +2150,10 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
} }
/* Save reset port val for resend. /* Save reset port val for resend.
Don't overwrite resend for close condition. */ Don't overwrite resend for open/close condition. */
if (p_priv->resend_cont != 3) if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1; p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) { if (this_urb->status == -EINPROGRESS) {
/* dbg ("%s - already writing", __FUNCTION__); */ /* dbg ("%s - already writing", __FUNCTION__); */
mdelay(5); mdelay(5);
...@@ -2083,12 +2265,31 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, ...@@ -2083,12 +2265,31 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
msg.dtr = p_priv->dtr_state; msg.dtr = p_priv->dtr_state;
p_priv->resend_cont = 0; p_priv->resend_cont = 0;
memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));
/* if the device is a 49wg, we send control message on usb control EP 0 */
if (d_details->product_id == keyspan_usa49wg_product_id) {
dr = (void *)(s_priv->ctrl_buf);
dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
dr->bRequest = 0xB0; /* 49wg control message */;
dr->wValue = 0;
dr->wIndex = 0;
dr->wLength = cpu_to_le16(sizeof(msg));
memcpy (s_priv->glocont_buf, &msg, sizeof(msg));
usb_fill_control_urb(this_urb, serial->dev, usb_sndctrlpipe(serial->dev, 0),
(unsigned char *)dr, s_priv->glocont_buf, sizeof(msg),
usa49_glocont_callback, serial);
} else {
memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
/* send the data out the device on control endpoint */ /* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg); this_urb->transfer_buffer_length = sizeof(msg);
this_urb->dev = serial->dev; this_urb->dev = serial->dev;
}
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err); dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
} }
...@@ -2241,6 +2442,154 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, ...@@ -2241,6 +2442,154 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
return (0); return (0);
} }
static int keyspan_usa67_send_setup(struct usb_serial *serial,
struct usb_serial_port *port,
int reset_port)
{
struct keyspan_usa67_portControlMessage msg;
struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
struct urb *this_urb;
int err, device_port;
dbg ("%s", __FUNCTION__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
d_details = s_priv->device_details;
this_urb = s_priv->glocont_urb;
/* Work out which port within the device is being setup */
device_port = port->number - port->serial->minor;
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
dbg("%s - oops no urb for port %d.", __FUNCTION__,
port->number);
return -1;
}
/* Save reset port val for resend.
Don't overwrite resend for open/close condition. */
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
/* dbg ("%s - already writing", __FUNCTION__); */
mdelay(5);
return(-1);
}
memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
msg.port = device_port;
/* Only set baud rate if it's changed */
if (p_priv->old_baud != p_priv->baud) {
p_priv->old_baud = p_priv->baud;
msg.setClocking = 0xff;
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
p_priv->baud);
msg.baudLo = 0;
msg.baudHi = 125; /* Values for 9600 baud */
msg.prescaler = 10;
}
msg.setPrescaler = 0xff;
}
msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
switch (p_priv->cflag & CSIZE) {
case CS5:
msg.lcr |= USA_DATABITS_5;
break;
case CS6:
msg.lcr |= USA_DATABITS_6;
break;
case CS7:
msg.lcr |= USA_DATABITS_7;
break;
case CS8:
msg.lcr |= USA_DATABITS_8;
break;
}
if (p_priv->cflag & PARENB) {
/* note USA_PARITY_NONE == 0 */
msg.lcr |= (p_priv->cflag & PARODD)?
USA_PARITY_ODD: USA_PARITY_EVEN;
}
msg.setLcr = 0xff;
msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
msg.xonFlowControl = 0;
msg.setFlowControl = 0xff;
msg.forwardingLength = 16;
msg.xonChar = 17;
msg.xoffChar = 19;
if (reset_port == 1) {
/* Opening port */
msg._txOn = 1;
msg._txOff = 0;
msg.txFlush = 0;
msg.txBreak = 0;
msg.rxOn = 1;
msg.rxOff = 0;
msg.rxFlush = 1;
msg.rxForward = 0;
msg.returnStatus = 0;
msg.resetDataToggle = 0xff;
} else if (reset_port == 2) {
/* Closing port */
msg._txOn = 0;
msg._txOff = 1;
msg.txFlush = 0;
msg.txBreak = 0;
msg.rxOn = 0;
msg.rxOff = 1;
msg.rxFlush = 1;
msg.rxForward = 0;
msg.returnStatus = 0;
msg.resetDataToggle = 0;
} else {
/* Sending intermediate configs */
msg._txOn = (! p_priv->break_on);
msg._txOff = 0;
msg.txFlush = 0;
msg.txBreak = (p_priv->break_on);
msg.rxOn = 0;
msg.rxOff = 0;
msg.rxFlush = 0;
msg.rxForward = 0;
msg.returnStatus = 0;
msg.resetDataToggle = 0x0;
}
/* Do handshaking outputs */
msg.setTxTriState_setRts = 0xff;
msg.txTriState_rts = p_priv->rts_state;
msg.setHskoa_setDtr = 0xff;
msg.hskoa_dtr = p_priv->dtr_state;
p_priv->resend_cont = 0;
memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__,
err);
return (0);
}
static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
{ {
struct usb_serial *serial = port->serial; struct usb_serial *serial = port->serial;
...@@ -2265,6 +2614,9 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) ...@@ -2265,6 +2614,9 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
case msg_usa90: case msg_usa90:
keyspan_usa90_send_setup(serial, port, reset_port); keyspan_usa90_send_setup(serial, port, reset_port);
break; break;
case msg_usa67:
keyspan_usa67_send_setup(serial, port, reset_port);
break;
} }
} }
...@@ -2313,9 +2665,19 @@ static int keyspan_startup (struct usb_serial *serial) ...@@ -2313,9 +2665,19 @@ static int keyspan_startup (struct usb_serial *serial)
keyspan_setup_urbs(serial); keyspan_setup_urbs(serial);
if (s_priv->instat_urb != NULL) {
s_priv->instat_urb->dev = serial->dev; s_priv->instat_urb->dev = serial->dev;
if ((err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL)) != 0) { err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
dbg("%s - submit instat urb failed %d", __FUNCTION__, err); if (err != 0)
dbg("%s - submit instat urb failed %d", __FUNCTION__,
err);
}
if (s_priv->indat_urb != NULL) {
s_priv->indat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
if (err != 0)
dbg("%s - submit indat urb failed %d", __FUNCTION__,
err);
} }
return (0); return (0);
...@@ -2335,6 +2697,7 @@ static void keyspan_shutdown (struct usb_serial *serial) ...@@ -2335,6 +2697,7 @@ static void keyspan_shutdown (struct usb_serial *serial)
/* Stop reading/writing urbs */ /* Stop reading/writing urbs */
stop_urb(s_priv->instat_urb); stop_urb(s_priv->instat_urb);
stop_urb(s_priv->glocont_urb); stop_urb(s_priv->glocont_urb);
stop_urb(s_priv->indat_urb);
for (i = 0; i < serial->num_ports; ++i) { for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i]; port = serial->port[i];
p_priv = usb_get_serial_port_data(port); p_priv = usb_get_serial_port_data(port);
...@@ -2348,6 +2711,7 @@ static void keyspan_shutdown (struct usb_serial *serial) ...@@ -2348,6 +2711,7 @@ static void keyspan_shutdown (struct usb_serial *serial)
/* Now free them */ /* Now free them */
usb_free_urb(s_priv->instat_urb); usb_free_urb(s_priv->instat_urb);
usb_free_urb(s_priv->indat_urb);
usb_free_urb(s_priv->glocont_urb); usb_free_urb(s_priv->glocont_urb);
for (i = 0; i < serial->num_ports; ++i) { for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i]; port = serial->port[i];
......
...@@ -99,6 +99,10 @@ static int keyspan_usa90_send_setup (struct usb_serial *serial, ...@@ -99,6 +99,10 @@ static int keyspan_usa90_send_setup (struct usb_serial *serial,
struct usb_serial_port *port, struct usb_serial_port *port,
int reset_port); int reset_port);
static int keyspan_usa67_send_setup (struct usb_serial *serial,
struct usb_serial_port *port,
int reset_port);
/* Struct used for firmware - increased size of data section /* Struct used for firmware - increased size of data section
to allow Keyspan's 'C' firmware struct to be used unmodified */ to allow Keyspan's 'C' firmware struct to be used unmodified */
struct ezusb_hex_record { struct ezusb_hex_record {
...@@ -229,15 +233,17 @@ struct ezusb_hex_record { ...@@ -229,15 +233,17 @@ struct ezusb_hex_record {
#define keyspan_usa28_product_id 0x010f #define keyspan_usa28_product_id 0x010f
#define keyspan_usa28x_product_id 0x0110 #define keyspan_usa28x_product_id 0x0110
#define keyspan_usa28xa_product_id 0x0115 #define keyspan_usa28xa_product_id 0x0115
#define keyspan_usa28xb_product_id 0x0110
#define keyspan_usa28xg_product_id 0x0135
#define keyspan_usa49w_product_id 0x010a #define keyspan_usa49w_product_id 0x010a
#define keyspan_usa49wlc_product_id 0x012a #define keyspan_usa49wlc_product_id 0x012a
#define keyspan_usa49wg_product_id 0x0131
struct keyspan_device_details { struct keyspan_device_details {
/* product ID value */ /* product ID value */
int product_id; int product_id;
enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90} msg_format; enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
/* Number of physical ports */ /* Number of physical ports */
int num_ports; int num_ports;
...@@ -264,6 +270,9 @@ struct keyspan_device_details { ...@@ -264,6 +270,9 @@ struct keyspan_device_details {
/* Endpoint used for input status */ /* Endpoint used for input status */
int instat_endpoint; int instat_endpoint;
/* Endpoint used for input data 49WG only */
int indat_endpoint;
/* Endpoint used for global control functions */ /* Endpoint used for global control functions */
int glocont_endpoint; int glocont_endpoint;
...@@ -287,6 +296,7 @@ static const struct keyspan_device_details usa18x_device_details = { ...@@ -287,6 +296,7 @@ static const struct keyspan_device_details usa18x_device_details = {
.inack_endpoints = {0x85}, .inack_endpoints = {0x85},
.outcont_endpoints = {0x05}, .outcont_endpoints = {0x05},
.instat_endpoint = 0x87, .instat_endpoint = 0x87,
.indat_endpoint = -1,
.glocont_endpoint = 0x07, .glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud, .calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA18X_BAUDCLK, .baudclk = KEYSPAN_USA18X_BAUDCLK,
...@@ -303,6 +313,7 @@ static const struct keyspan_device_details usa19_device_details = { ...@@ -303,6 +313,7 @@ static const struct keyspan_device_details usa19_device_details = {
.inack_endpoints = {0x83}, .inack_endpoints = {0x83},
.outcont_endpoints = {0x03}, .outcont_endpoints = {0x03},
.instat_endpoint = 0x84, .instat_endpoint = 0x84,
.indat_endpoint = -1,
.glocont_endpoint = -1, .glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa19_calc_baud, .calculate_baud_rate = keyspan_usa19_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK, .baudclk = KEYSPAN_USA19_BAUDCLK,
...@@ -319,6 +330,7 @@ static const struct keyspan_device_details usa19qi_device_details = { ...@@ -319,6 +330,7 @@ static const struct keyspan_device_details usa19qi_device_details = {
.inack_endpoints = {0x83}, .inack_endpoints = {0x83},
.outcont_endpoints = {0x03}, .outcont_endpoints = {0x03},
.instat_endpoint = 0x84, .instat_endpoint = 0x84,
.indat_endpoint = -1,
.glocont_endpoint = -1, .glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa28_calc_baud, .calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK, .baudclk = KEYSPAN_USA19_BAUDCLK,
...@@ -335,6 +347,7 @@ static const struct keyspan_device_details mpr_device_details = { ...@@ -335,6 +347,7 @@ static const struct keyspan_device_details mpr_device_details = {
.inack_endpoints = {0x83}, .inack_endpoints = {0x83},
.outcont_endpoints = {0x03}, .outcont_endpoints = {0x03},
.instat_endpoint = 0x84, .instat_endpoint = 0x84,
.indat_endpoint = -1,
.glocont_endpoint = -1, .glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa28_calc_baud, .calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK, .baudclk = KEYSPAN_USA19_BAUDCLK,
...@@ -351,6 +364,7 @@ static const struct keyspan_device_details usa19qw_device_details = { ...@@ -351,6 +364,7 @@ static const struct keyspan_device_details usa19qw_device_details = {
.inack_endpoints = {0x85}, .inack_endpoints = {0x85},
.outcont_endpoints = {0x05}, .outcont_endpoints = {0x05},
.instat_endpoint = 0x87, .instat_endpoint = 0x87,
.indat_endpoint = -1,
.glocont_endpoint = 0x07, .glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud, .calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK, .baudclk = KEYSPAN_USA19W_BAUDCLK,
...@@ -367,6 +381,7 @@ static const struct keyspan_device_details usa19w_device_details = { ...@@ -367,6 +381,7 @@ static const struct keyspan_device_details usa19w_device_details = {
.inack_endpoints = {0x85}, .inack_endpoints = {0x85},
.outcont_endpoints = {0x05}, .outcont_endpoints = {0x05},
.instat_endpoint = 0x87, .instat_endpoint = 0x87,
.indat_endpoint = -1,
.glocont_endpoint = 0x07, .glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud, .calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK, .baudclk = KEYSPAN_USA19W_BAUDCLK,
...@@ -383,6 +398,7 @@ static const struct keyspan_device_details usa19hs_device_details = { ...@@ -383,6 +398,7 @@ static const struct keyspan_device_details usa19hs_device_details = {
.inack_endpoints = {-1}, .inack_endpoints = {-1},
.outcont_endpoints = {0x02}, .outcont_endpoints = {0x02},
.instat_endpoint = 0x82, .instat_endpoint = 0x82,
.indat_endpoint = -1,
.glocont_endpoint = -1, .glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa19hs_calc_baud, .calculate_baud_rate = keyspan_usa19hs_calc_baud,
.baudclk = KEYSPAN_USA19HS_BAUDCLK, .baudclk = KEYSPAN_USA19HS_BAUDCLK,
...@@ -399,6 +415,7 @@ static const struct keyspan_device_details usa28_device_details = { ...@@ -399,6 +415,7 @@ static const struct keyspan_device_details usa28_device_details = {
.inack_endpoints = {0x85, 0x86}, .inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06}, .outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87, .instat_endpoint = 0x87,
.indat_endpoint = -1,
.glocont_endpoint = 0x07, .glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa28_calc_baud, .calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA28_BAUDCLK, .baudclk = KEYSPAN_USA28_BAUDCLK,
...@@ -415,6 +432,7 @@ static const struct keyspan_device_details usa28x_device_details = { ...@@ -415,6 +432,7 @@ static const struct keyspan_device_details usa28x_device_details = {
.inack_endpoints = {0x85, 0x86}, .inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06}, .outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87, .instat_endpoint = 0x87,
.indat_endpoint = -1,
.glocont_endpoint = 0x07, .glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud, .calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA28X_BAUDCLK, .baudclk = KEYSPAN_USA28X_BAUDCLK,
...@@ -431,11 +449,28 @@ static const struct keyspan_device_details usa28xa_device_details = { ...@@ -431,11 +449,28 @@ static const struct keyspan_device_details usa28xa_device_details = {
.inack_endpoints = {0x85, 0x86}, .inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06}, .outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87, .instat_endpoint = 0x87,
.indat_endpoint = -1,
.glocont_endpoint = 0x07, .glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud, .calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA28X_BAUDCLK, .baudclk = KEYSPAN_USA28X_BAUDCLK,
}; };
static const struct keyspan_device_details usa28xg_device_details = {
.product_id = keyspan_usa28xg_product_id,
.msg_format = msg_usa67,
.num_ports = 2,
.indat_endp_flip = 0,
.outdat_endp_flip = 0,
.indat_endpoints = {0x84, 0x88},
.outdat_endpoints = {0x02, 0x06},
.inack_endpoints = {-1, -1},
.outcont_endpoints = {-1, -1},
.instat_endpoint = 0x81,
.indat_endpoint = -1,
.glocont_endpoint = 0x01,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA28X_BAUDCLK,
};
/* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */ /* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */
static const struct keyspan_device_details usa49w_device_details = { static const struct keyspan_device_details usa49w_device_details = {
...@@ -449,6 +484,7 @@ static const struct keyspan_device_details usa49w_device_details = { ...@@ -449,6 +484,7 @@ static const struct keyspan_device_details usa49w_device_details = {
.inack_endpoints = {-1, -1, -1, -1}, .inack_endpoints = {-1, -1, -1, -1},
.outcont_endpoints = {-1, -1, -1, -1}, .outcont_endpoints = {-1, -1, -1, -1},
.instat_endpoint = 0x87, .instat_endpoint = 0x87,
.indat_endpoint = -1,
.glocont_endpoint = 0x07, .glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud, .calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA49W_BAUDCLK, .baudclk = KEYSPAN_USA49W_BAUDCLK,
...@@ -465,11 +501,29 @@ static const struct keyspan_device_details usa49wlc_device_details = { ...@@ -465,11 +501,29 @@ static const struct keyspan_device_details usa49wlc_device_details = {
.inack_endpoints = {-1, -1, -1, -1}, .inack_endpoints = {-1, -1, -1, -1},
.outcont_endpoints = {-1, -1, -1, -1}, .outcont_endpoints = {-1, -1, -1, -1},
.instat_endpoint = 0x87, .instat_endpoint = 0x87,
.indat_endpoint = -1,
.glocont_endpoint = 0x07, .glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud, .calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK, .baudclk = KEYSPAN_USA19W_BAUDCLK,
}; };
static const struct keyspan_device_details usa49wg_device_details = {
.product_id = keyspan_usa49wg_product_id,
.msg_format = msg_usa49,
.num_ports = 4,
.indat_endp_flip = 0,
.outdat_endp_flip = 0,
.indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */
.outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
.inack_endpoints = {-1, -1, -1, -1},
.outcont_endpoints = {-1, -1, -1, -1},
.instat_endpoint = 0x81,
.indat_endpoint = 0x88,
.glocont_endpoint = 0x00, /* uses control EP */
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK,
};
static const struct keyspan_device_details *keyspan_devices[] = { static const struct keyspan_device_details *keyspan_devices[] = {
&usa18x_device_details, &usa18x_device_details,
&usa19_device_details, &usa19_device_details,
...@@ -481,9 +535,11 @@ static const struct keyspan_device_details *keyspan_devices[] = { ...@@ -481,9 +535,11 @@ static const struct keyspan_device_details *keyspan_devices[] = {
&usa28_device_details, &usa28_device_details,
&usa28x_device_details, &usa28x_device_details,
&usa28xa_device_details, &usa28xa_device_details,
&usa28xg_device_details,
/* 28xb not required as it renumerates as a 28x */ /* 28xb not required as it renumerates as a 28x */
&usa49w_device_details, &usa49w_device_details,
&usa49wlc_device_details, &usa49wlc_device_details,
&usa49wg_device_details,
NULL, NULL,
}; };
...@@ -510,8 +566,11 @@ static struct usb_device_id keyspan_ids_combined[] = { ...@@ -510,8 +566,11 @@ static struct usb_device_id keyspan_ids_combined[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
...@@ -557,12 +616,15 @@ static struct usb_device_id keyspan_2port_ids[] = { ...@@ -557,12 +616,15 @@ static struct usb_device_id keyspan_2port_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
static struct usb_device_id keyspan_4port_ids[] = { static struct usb_device_id keyspan_4port_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
...@@ -573,7 +635,6 @@ static struct usb_serial_driver keyspan_pre_device = { ...@@ -573,7 +635,6 @@ static struct usb_serial_driver keyspan_pre_device = {
.name = "keyspan_no_firm", .name = "keyspan_no_firm",
}, },
.description = "Keyspan - (without firmware)", .description = "Keyspan - (without firmware)",
.usb_driver = &keyspan_driver,
.id_table = keyspan_pre_ids, .id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE, .num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE,
...@@ -588,7 +649,6 @@ static struct usb_serial_driver keyspan_1port_device = { ...@@ -588,7 +649,6 @@ static struct usb_serial_driver keyspan_1port_device = {
.name = "keyspan_1", .name = "keyspan_1",
}, },
.description = "Keyspan 1 port adapter", .description = "Keyspan 1 port adapter",
.usb_driver = &keyspan_driver,
.id_table = keyspan_1port_ids, .id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE, .num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE,
...@@ -616,7 +676,6 @@ static struct usb_serial_driver keyspan_2port_device = { ...@@ -616,7 +676,6 @@ static struct usb_serial_driver keyspan_2port_device = {
.name = "keyspan_2", .name = "keyspan_2",
}, },
.description = "Keyspan 2 port adapter", .description = "Keyspan 2 port adapter",
.usb_driver = &keyspan_driver,
.id_table = keyspan_2port_ids, .id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE, .num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE,
...@@ -644,11 +703,10 @@ static struct usb_serial_driver keyspan_4port_device = { ...@@ -644,11 +703,10 @@ static struct usb_serial_driver keyspan_4port_device = {
.name = "keyspan_4", .name = "keyspan_4",
}, },
.description = "Keyspan 4 port adapter", .description = "Keyspan 4 port adapter",
.usb_driver = &keyspan_driver,
.id_table = keyspan_4port_ids, .id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE, .num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 5, .num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = 5, .num_bulk_out = NUM_DONT_CARE,
.num_ports = 4, .num_ports = 4,
.open = keyspan_open, .open = keyspan_open,
.close = keyspan_close, .close = keyspan_close,
......
/*
usa67msg.h
Copyright (c) 1998-2007 InnoSys Incorporated. All Rights Reserved
This file is available under a BSD-style copyright
Keyspan USB Async Firmware to run on Anchor FX1
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain this licence text
without modification, this list of conditions, and the following
disclaimer. The following copyright notice must appear immediately at
the beginning of all source files:
Copyright (c) 1998-2007 InnoSys Incorporated. All Rights Reserved
This file is available under a BSD-style copyright
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. The name of InnoSys Incorprated may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Fourth revision: This message format supports the USA28XG
Buffer formats for RX/TX data messages are not defined by
a structure, but are described here:
USB OUT (host -> USAxx, transmit) messages contain a
REQUEST_ACK indicator (set to 0xff to request an ACK at the
completion of transmit; 0x00 otherwise), followed by data:
RQSTACK DAT DAT DAT ...
with a total data length of up to 63.
USB IN (USAxx -> host, receive) messages begin with a status
byte in which the 0x80 bit is either:
(a) 0x80 bit clear
indicates that the bytes following it are all data
bytes:
STAT DATA DATA DATA DATA DATA ...
for a total of up to 63 DATA bytes,
or:
(b) 0x80 bit set
indiates that the bytes following alternate data and
status bytes:
STAT DATA STAT DATA STAT DATA STAT DATA ...
for a total of up to 32 DATA bytes.
The valid bits in the STAT bytes are:
OVERRUN 0x02
PARITY 0x04
FRAMING 0x08
BREAK 0x10
Notes:
(1) The OVERRUN bit can appear in either (a) or (b) format
messages, but the but the PARITY/FRAMING/BREAK bits
only appear in (b) format messages.
(2) For the host to determine the exact point at which the
overrun occurred (to identify the point in the data
stream at which the data was lost), it needs to count
128 characters, starting at the first character of the
message in which OVERRUN was reported; the lost character(s)
would have been received between the 128th and 129th
characters.
(3) An RX data message in which the first byte has 0x80 clear
serves as a "break off" indicator.
revision history:
1999feb10 add reportHskiaChanges to allow us to ignore them
1999feb10 add txAckThreshold for fast+loose throughput enhancement
1999mar30 beef up support for RX error reporting
1999apr14 add resetDataToggle to control message
2000jan04 merge with usa17msg.h
2000jun01 add extended BSD-style copyright text
2001jul05 change message format to improve OVERRUN case
2002jun05 update copyright date, improve comments
2006feb06 modify for FX1 chip
*/
#ifndef __USA67MSG__
#define __USA67MSG__
// all things called "ControlMessage" are sent on the 'control' endpoint
typedef struct keyspan_usa67_portControlMessage
{
u8 port; // 0 or 1 (selects port)
/*
there are three types of "commands" sent in the control message:
1. configuration changes which must be requested by setting
the corresponding "set" flag (and should only be requested
when necessary, to reduce overhead on the device):
*/
u8 setClocking, // host requests baud rate be set
baudLo, // host does baud divisor calculation
baudHi, // baudHi is only used for first port (gives lower rates)
externalClock_txClocking,
// 0=internal, other=external
setLcr, // host requests lcr be set
lcr, // use PARITY, STOPBITS, DATABITS below
setFlowControl, // host requests flow control be set
ctsFlowControl, // 1=use CTS flow control, 0=don't
xonFlowControl, // 1=use XON/XOFF flow control, 0=don't
xonChar, // specified in current character format
xoffChar, // specified in current character format
setTxTriState_setRts,
// host requests TX tri-state be set
txTriState_rts, // 1=active (normal), 0=tristate (off)
setHskoa_setDtr,
// host requests HSKOA output be set
hskoa_dtr, // 1=on, 0=off
setPrescaler, // host requests prescalar be set (default: 13)
prescaler; // specified as N/8; values 8-ff are valid
// must be set any time internal baud rate is set;
// must not be set when external clocking is used
/*
3. configuration data which is simply used as is (no overhead,
but must be specified correctly in every host message).
*/
u8 forwardingLength, // forward when this number of chars available
reportHskiaChanges_dsrFlowControl,
// 1=normal; 0=ignore external clock
// 1=use DSR flow control, 0=don't
txAckThreshold, // 0=not allowed, 1=normal, 2-255 deliver ACK faster
loopbackMode; // 0=no loopback, 1=loopback enabled
/*
4. commands which are flags only; these are processed in order
(so that, e.g., if both _txOn and _txOff flags are set, the
port ends in a TX_OFF state); any non-zero value is respected
*/
u8 _txOn, // enable transmitting (and continue if there's data)
_txOff, // stop transmitting
txFlush, // toss outbound data
txBreak, // turn on break (cleared by _txOn)
rxOn, // turn on receiver
rxOff, // turn off receiver
rxFlush, // toss inbound data
rxForward, // forward all inbound data, NOW (as if fwdLen==1)
returnStatus, // return current status (even if it hasn't changed)
resetDataToggle;// reset data toggle state to DATA0
} keyspan_usa67_portControlMessage;
// defines for bits in lcr
#define USA_DATABITS_5 0x00
#define USA_DATABITS_6 0x01
#define USA_DATABITS_7 0x02
#define USA_DATABITS_8 0x03
#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes
#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte
#define STOPBITS_678_2 0x04 // 2 stop bits for 6/7/8-bit byte
#define USA_PARITY_NONE 0x00
#define USA_PARITY_ODD 0x08
#define USA_PARITY_EVEN 0x18
#define PARITY_1 0x28
#define PARITY_0 0x38
// all things called "StatusMessage" are sent on the status endpoint
typedef struct keyspan_usa67_portStatusMessage // one for each port
{
u8 port, // 0=first, 1=second, other=see below
hskia_cts, // reports HSKIA pin
gpia_dcd, // reports GPIA pin
_txOff, // port has been disabled (by host)
_txXoff, // port is in XOFF state (either host or RX XOFF)
txAck, // indicates a TX message acknowledgement
rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off
controlResponse;// 1=a control message has been processed
} keyspan_usa67_portStatusMessage;
// bits in RX data message when STAT byte is included
#define RXERROR_OVERRUN 0x02
#define RXERROR_PARITY 0x04
#define RXERROR_FRAMING 0x08
#define RXERROR_BREAK 0x10
typedef struct keyspan_usa67_globalControlMessage
{
u8 port, // 3
sendGlobalStatus, // 2=request for two status responses
resetStatusToggle, // 1=reset global status toggle
resetStatusCount; // a cycling value
} keyspan_usa67_globalControlMessage;
typedef struct keyspan_usa67_globalStatusMessage
{
u8 port, // 3
sendGlobalStatus, // from request, decremented
resetStatusCount; // as in request
} keyspan_usa67_globalStatusMessage;
typedef struct keyspan_usa67_globalDebugMessage
{
u8 port, // 2
a,
b,
c,
d;
} keyspan_usa67_globalDebugMessage;
// ie: the maximum length of an FX1 endpoint buffer
#define MAX_DATA_LEN 64
// update status approx. 60 times a second (16.6666 ms)
#define STATUS_UPDATE_INTERVAL 16
// status rationing tuning value (each port gets checked each n ms)
#define STATUS_RATION 10
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment