Commit 0cca6c89 authored by Ludovic Desroches's avatar Ludovic Desroches Committed by Linus Walleij

pinctrl: generic: update references to Documentation/pinctrl.txt

Update deprecated references to Documentation/pinctrl.txt since it has been
moved to Documentation/driver-api/pinctl.rst.
Signed-off-by: default avatarLudovic Desroches <ludovic.desroches@o2linux.fr>
Fixes: 5a9b7383 ("pinctrl.txt: move it to the driver-api book")
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 5d996132
...@@ -459,7 +459,7 @@ pin controller? ...@@ -459,7 +459,7 @@ pin controller?
This is done by registering "ranges" of pins, which are essentially This is done by registering "ranges" of pins, which are essentially
cross-reference tables. These are described in cross-reference tables. These are described in
Documentation/pinctrl.txt Documentation/driver-api/pinctl.rst
While the pin allocation is totally managed by the pinctrl subsystem, While the pin allocation is totally managed by the pinctrl subsystem,
gpio (under gpiolib) is still maintained by gpio drivers. It may happen gpio (under gpiolib) is still maintained by gpio drivers. It may happen
......
...@@ -10375,7 +10375,7 @@ L: linux-gpio@vger.kernel.org ...@@ -10375,7 +10375,7 @@ L: linux-gpio@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
S: Maintained S: Maintained
F: Documentation/devicetree/bindings/pinctrl/ F: Documentation/devicetree/bindings/pinctrl/
F: Documentation/pinctrl.txt F: Documentation/driver-api/pinctl.rst
F: drivers/pinctrl/ F: drivers/pinctrl/
F: include/linux/pinctrl/ F: include/linux/pinctrl/
......
...@@ -843,7 +843,7 @@ struct dev_links_info { ...@@ -843,7 +843,7 @@ struct dev_links_info {
* hibernation, system resume and during runtime PM transitions * hibernation, system resume and during runtime PM transitions
* along with subsystem-level and driver-level callbacks. * along with subsystem-level and driver-level callbacks.
* @pins: For device pin management. * @pins: For device pin management.
* See Documentation/pinctrl.txt for details. * See Documentation/driver-api/pinctl.rst for details.
* @msi_list: Hosts MSI descriptors * @msi_list: Hosts MSI descriptors
* @msi_domain: The generic MSI domain this device is using. * @msi_domain: The generic MSI domain this device is using.
* @numa_node: NUMA node this device is close to. * @numa_node: NUMA node this device is close to.
......
...@@ -81,8 +81,8 @@ ...@@ -81,8 +81,8 @@
* it. * it.
* @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a * @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a
* value on the line. Use argument 1 to indicate high level, argument 0 to * value on the line. Use argument 1 to indicate high level, argument 0 to
* indicate low level. (Please see Documentation/pinctrl.txt, section * indicate low level. (Please see Documentation/driver-api/pinctl.rst,
* "GPIO mode pitfalls" for a discussion around this parameter.) * section "GPIO mode pitfalls" for a discussion around this parameter.)
* @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
* supplies, the argument to this parameter (on a custom format) tells * supplies, the argument to this parameter (on a custom format) tells
* the driver which alternative power source to use. * the driver which alternative power source to use.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment