Commit 0d34c86c authored by Hirokazu Takata's avatar Hirokazu Takata Committed by Linus Torvalds

[PATCH] m32r: mappi3 reboot support

Here is a patch to support a reboot function for M3A-2170(Mappi-III)
evaluation board.
Signed-off-by: default avatarHayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: default avatarHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent fa372810
......@@ -116,6 +116,10 @@ void cpu_idle (void)
void machine_restart(char *__unused)
{
#if defined(CONFIG_PLAT_MAPPI3)
outw(1, (unsigned long)PLD_REBOOT);
#endif
printk("Please push reset button!\n");
while (1)
cpu_relax();
......
......@@ -53,17 +53,15 @@
/* Power Control of MMC and CF */
#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
/*==== ICU ====*/
/* ICU */
#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */
#define M32R_IRQ_I2C (28) /* I2C-BUS */
#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */
#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert */
#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */
#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */
#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
#if 0
/* LED Control
*
......@@ -97,7 +95,6 @@
#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
#if 0
/* RTC */
#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
......@@ -140,4 +137,7 @@
#endif
/* Reset Control */
#define PLD_REBOOT __reg16(PLD_BASE + 0x38000)
#endif /* _MAPPI3_PLD.H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment