ath9k_hw: Fix TX carrier leakage for IEEE compliance on AR9003 2.2
This updates the initvals for the AR9003 2.2 chipsets. The initvals are the initial register values we use for our registers upon hardware reset. This synchs up the initvals to match what our latest recommendation from our systems engineering team. The description of changes in this update: Improves ability to support very strong Rx conditions. Enhances DFS support for AP-mode. Improves performance of Tx carrier leak calibration. Adds support for Japan channel 14 Tx filtering requirements. Improves Tx power accuracy. Impact: Update required to address degraded throughput at very short range. Update required for AP-mode DFS certification. Update required to comply to IEEE Tx carrier leak specification. May not meet expected +/- 2 dB Tx power accuracy without update. The most important fix here would be the TX carrier leakage required to comply with IEEE 802.11 specifications. The group of changes have been tested all together in one release. References: Osprey 2.2 header file ver #33 Checksums: $ ./initvals -f ar9003-2p2 0x000000004a488fc7 ar9300_2p2_radio_postamble 0x0000000046cb1300 ar9300Modes_lowest_ob_db_tx_gain_table_2p2 0x00000000e912711f ar9300Modes_fast_clock_2p2 0x0000000037ac0ee8 ar9300_2p2_radio_core 0x00000000047a7700 ar9300Common_rx_gain_table_merlin_2p2 0x0000000003f783bb ar9300_2p2_mac_postamble 0x00000000301fc841 ar9300_2p2_soc_postamble 0x000000005ec8075f ar9200_merlin_2p2_radio_core 0x0000000083372ffa ar9300_2p2_baseband_postamble 0x00000000c4f59974 ar9300_2p2_baseband_core 0x00000000e20d2e72 ar9300Modes_high_power_tx_gain_table_2p2 0x000000007fd55c70 ar9300Modes_high_ob_db_tx_gain_table_2p2 0x0000000029495000 ar9300Common_rx_gain_table_2p2 0x0000000042cb1300 ar9300Modes_low_ob_db_tx_gain_table_2p2 0x00000000c4739cd6 ar9300_2p2_mac_core 0x000000003521a300 ar9300Common_wo_xlna_rx_gain_table_2p2 0x00000000a15ccf1b ar9300_2p2_soc_preamble 0x0000000029734396 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2 0x000000002d834396 ar9300PciePhy_clkreq_enable_L1_2p2 0x0000000029834396 ar9300PciePhy_clkreq_disable_L1_2p2 $ ./initvals -f ar9003-2p2 | sha1sum 0ceddb5cf66737610fb51f04cf3e9ff71870c7b4 - Cc: stable@kernel.org Cc: Yixiang Li <yixiang.li@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Showing
Please register or sign in to comment