Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  xHCI: Clear PLC in xhci_bus_resume()
  USB: fix regression in usbip by setting has_tt flag
  usb/isp1760: Report correct urb status after unlink
  omap:usb: add regulator support for EHCI
  mfd: Fix usbhs_enable error handling
  usb: musb: gadget: Fix out-of-sync runtime pm calls
  usb: musb: omap2430: Fix retention idle on musb peripheral only boards

drivers/mfd/omap-usb-host.c

@@ -25,7 +25,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
 #include <plat/usb.h>
 
 #define USBHS_DRIVER_NAME	"usbhs-omap"
@@ -700,8 +699,7 @@ static int usbhs_enable(struct device *dev)
 	dev_dbg(dev, "starting TI HSUSB Controller\n");
 	if (!pdata) {
 		dev_dbg(dev, "missing platform_data\n");
-		ret =  -ENODEV;
-		goto end_enable;
+		return  -ENODEV;
 	}
 
 	spin_lock_irqsave(&omap->lock, flags);
@@ -915,7 +913,8 @@ static int usbhs_enable(struct device *dev)
 
 end_count:
 	omap->count++;
-	goto end_enable;
+	spin_unlock_irqrestore(&omap->lock, flags);
+	return 0;
 
 err_tll:
 	if (pdata->ehci_data->phy_reset) {
@@ -931,8 +930,6 @@ static int usbhs_enable(struct device *dev)
 	clk_disable(omap->usbhost_fs_fck);
 	clk_disable(omap->usbhost_hs_fck);
 	clk_disable(omap->usbhost_ick);
-
-end_enable:
 	spin_unlock_irqrestore(&omap->lock, flags);
 	return ret;
 }

drivers/staging/usbip/vhci_hcd.c

@@ -1139,7 +1139,7 @@ static int vhci_hcd_probe(struct platform_device *pdev)
 		usbip_uerr("create hcd failed\n");
 		return -ENOMEM;
 	}
-
+	hcd->has_tt = 1;
 
 	/* this is private data for vhci_hcd */
 	the_controller = hcd_to_vhci(hcd);

drivers/usb/host/ehci-omap.c

@@ -40,6 +40,7 @@
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
 #include <plat/usb.h>
+#include <linux/regulator/consumer.h>
 
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
@@ -118,6 +119,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	struct ehci_hcd				*omap_ehci;
 	int					ret = -ENODEV;
 	int					irq;
+	int					i;
+	char					supply[7];
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -158,6 +161,23 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(res);
 	hcd->regs = regs;
 
+	/* get ehci regulator and enable */
+	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+		if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
+			pdata->regulator[i] = NULL;
+			continue;
+		}
+		snprintf(supply, sizeof(supply), "hsusb%d", i);
+		pdata->regulator[i] = regulator_get(dev, supply);
+		if (IS_ERR(pdata->regulator[i])) {
+			pdata->regulator[i] = NULL;
+			dev_dbg(dev,
+			"failed to get ehci port%d regulator\n", i);
+		} else {
+			regulator_enable(pdata->regulator[i]);
+		}
+	}
+
 	ret = omap_usbhs_enable(dev);
 	if (ret) {
 		dev_err(dev, "failed to start usbhs with err %d\n", ret);

drivers/usb/host/isp1760-hcd.c

@@ -1633,6 +1633,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			ints[i].qh = NULL;
 			ints[i].qtd = NULL;
 
+			urb->status = status;
 			isp1760_urb_done(hcd, urb);
 			if (qtd)
 				pe(hcd, qh, qtd);

drivers/usb/host/xhci-hub.c

@@ -777,7 +777,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 		if (t1 != t2)
 			xhci_writel(xhci, t2, port_array[port_index]);
 
-		if (DEV_HIGHSPEED(t1)) {
+		if (hcd->speed != HCD_USB3) {
 			/* enable remote wake up for USB 2.0 */
 			u32 __iomem *addr;
 			u32 tmp;
@@ -866,6 +866,21 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 				temp |= PORT_LINK_STROBE | XDEV_U0;
 				xhci_writel(xhci, temp, port_array[port_index]);
 			}
+			/* wait for the port to enter U0 and report port link
+			 * state change.
+			 */
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(20);
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			/* Clear PLC */
+			temp = xhci_readl(xhci, port_array[port_index]);
+			if (temp & PORT_PLC) {
+				temp = xhci_port_state_to_neutral(temp);
+				temp |= PORT_PLC;
+				xhci_writel(xhci, temp, port_array[port_index]);
+			}
+
 			slot_id = xhci_find_slot_id_by_port(hcd,
 					xhci, port_index + 1);
 			if (slot_id)
@@ -873,7 +888,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		} else
 			xhci_writel(xhci, temp, port_array[port_index]);
 
-		if (DEV_HIGHSPEED(temp)) {
+		if (hcd->speed != HCD_USB3) {
 			/* disable remote wake up for USB 2.0 */
 			u32 __iomem *addr;
 			u32 tmp;

drivers/usb/musb/musb_gadget.c

@@ -1887,12 +1887,10 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 			otg_set_vbus(musb->xceiv, 1);
 
 		hcd->self.uses_pio_for_control = 1;
-
+	}
 	if (musb->xceiv->last_event == USB_EVENT_NONE)
 		pm_runtime_put(musb->controller);
 
-	}
-
 	return 0;
 
 err2:

drivers/usb/musb/omap2430.c

@@ -270,7 +270,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
 		DBG(4, "VBUS Disconnect\n");
 
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
-		if (is_otg_enabled(musb))
+		if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
 			if (musb->gadget_driver)
 #endif
 			{