Commit 0ed87953 authored by Michal Wajdeczko's avatar Michal Wajdeczko Committed by Chris Wilson

drm/i915/guc: Redefine guc_log_level modparam values

We used value -1 to indicate "disabled" and values 0..3 to
indicate "enabled", but most of our other modparams are using
-1 for "auto" mode and 0 for "disable". For consistency let's
change our log level values to:

-1: auto (depends on platform and Kconfig.debug settings)
 0: disabled
 1: enabled (severity level 0 = min)
 2: enabled (severity level 1)
 3: enabled (severity level 2)
 4: enabled (severity level 3 = max)

v2: fix commit message (Sagar)
    display sanitized modparam value (Sagar)
    unify sanitize messages (Sagar/Michal)
Signed-off-by: default avatarMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111152441.21676-1-michal.wajdeczko@intel.comReviewed-by: default avatarSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
parent e9af4ea2
......@@ -155,7 +155,8 @@ i915_param_named_unsafe(enable_guc, int, 0400,
"(-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load)");
i915_param_named(guc_log_level, int, 0400,
"GuC firmware logging level (-1:disabled (default), 0-3:enabled)");
"GuC firmware logging level. Requires GuC to be loaded. "
"(-1=auto [default], 0=disable, 1..4=enable with verbosity min..max)");
i915_param_named_unsafe(guc_firmware_path, charp, 0400,
"GuC firmware path to use instead of the default one");
......
......@@ -215,6 +215,19 @@ static u32 get_core_family(struct drm_i915_private *dev_priv)
}
}
static u32 get_log_verbosity_flags(void)
{
if (i915_modparams.guc_log_level > 0) {
u32 verbosity = i915_modparams.guc_log_level - 1;
GEM_BUG_ON(verbosity > GUC_LOG_VERBOSITY_MAX);
return verbosity << GUC_LOG_VERBOSITY_SHIFT;
}
GEM_BUG_ON(i915_modparams.enable_guc < 0);
return GUC_LOG_DISABLED;
}
/*
* Initialise the GuC parameter block before starting the firmware
* transfer. These parameters are read by the firmware on startup
......@@ -247,12 +260,7 @@ void intel_guc_init_params(struct intel_guc *guc)
params[GUC_CTL_LOG_PARAMS] = guc->log.flags;
if (i915_modparams.guc_log_level >= 0) {
params[GUC_CTL_DEBUG] =
i915_modparams.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
} else {
params[GUC_CTL_DEBUG] = GUC_LOG_DISABLED;
}
params[GUC_CTL_DEBUG] = get_log_verbosity_flags();
/* If GuC submission is enabled, set up additional parameters here */
if (USES_GUC_SUBMISSION(dev_priv)) {
......@@ -445,7 +453,7 @@ int intel_guc_resume(struct drm_i915_private *dev_priv)
if (guc->fw.load_status != INTEL_UC_FIRMWARE_SUCCESS)
return 0;
if (i915_modparams.guc_log_level >= 0)
if (i915_modparams.guc_log_level)
gen9_enable_guc_interrupts(dev_priv);
data[0] = INTEL_GUC_ACTION_EXIT_S_STATE;
......
......@@ -33,11 +33,10 @@ static void guc_log_capture_logs(struct intel_guc *guc);
/**
* DOC: GuC firmware log
*
* Firmware log is enabled by setting i915.guc_log_level to non-negative level.
* Firmware log is enabled by setting i915.guc_log_level to the positive level.
* Log data is printed out via reading debugfs i915_guc_log_dump. Reading from
* i915_guc_load_status will print out firmware loading status and scratch
* registers value.
*
*/
static int guc_log_flush_complete(struct intel_guc *guc)
......@@ -147,7 +146,7 @@ static int guc_log_relay_file_create(struct intel_guc *guc)
struct dentry *log_dir;
int ret;
if (i915_modparams.guc_log_level < 0)
if (!i915_modparams.guc_log_level)
return 0;
/* For now create the log file in /sys/kernel/debug/dri/0 dir */
......@@ -423,8 +422,8 @@ static void guc_log_runtime_destroy(struct intel_guc *guc)
{
/*
* It's possible that the runtime stuff was never allocated because
* guc_log_level was < 0 at the time
**/
* GuC log was disabled at the boot time.
*/
if (!guc_log_has_runtime(guc))
return;
......@@ -441,9 +440,10 @@ static int guc_log_late_setup(struct intel_guc *guc)
lockdep_assert_held(&dev_priv->drm.struct_mutex);
if (!guc_log_has_runtime(guc)) {
/* If log_level was set as -1 at boot time, then setup needed to
* handle log buffer flush interrupts would not have been done yet,
* so do that now.
/*
* If log was disabled at boot time, then setup needed to handle
* log buffer flush interrupts would not have been done yet, so
* do that now.
*/
ret = guc_log_runtime_create(guc);
if (ret)
......@@ -460,7 +460,7 @@ static int guc_log_late_setup(struct intel_guc *guc)
guc_log_runtime_destroy(guc);
err:
/* logging will remain off */
i915_modparams.guc_log_level = -1;
i915_modparams.guc_log_level = 0;
return ret;
}
......@@ -482,8 +482,7 @@ static void guc_flush_logs(struct intel_guc *guc)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
if (!USES_GUC_SUBMISSION(dev_priv) ||
(i915_modparams.guc_log_level < 0))
if (!USES_GUC_SUBMISSION(dev_priv) || !i915_modparams.guc_log_level)
return;
/* First disable the interrupts, will be renabled afterwards */
......@@ -511,9 +510,6 @@ int intel_guc_log_create(struct intel_guc *guc)
GEM_BUG_ON(guc->log.vma);
if (i915_modparams.guc_log_level > GUC_LOG_VERBOSITY_MAX)
i915_modparams.guc_log_level = GUC_LOG_VERBOSITY_MAX;
/* The first page is to save log buffer state. Allocate one
* extra page for others in case for overlap */
size = (1 + GUC_LOG_DPC_PAGES + 1 +
......@@ -537,7 +533,7 @@ int intel_guc_log_create(struct intel_guc *guc)
guc->log.vma = vma;
if (i915_modparams.guc_log_level >= 0) {
if (i915_modparams.guc_log_level) {
ret = guc_log_runtime_create(guc);
if (ret < 0)
goto err_vma;
......@@ -558,7 +554,7 @@ int intel_guc_log_create(struct intel_guc *guc)
i915_vma_unpin_and_release(&guc->log.vma);
err:
/* logging will be off */
i915_modparams.guc_log_level = -1;
i915_modparams.guc_log_level = 0;
return ret;
}
......@@ -582,7 +578,7 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
return -EINVAL;
/* This combination doesn't make sense & won't have any effect */
if (!log_param.logging_enabled && (i915_modparams.guc_log_level < 0))
if (!log_param.logging_enabled && !i915_modparams.guc_log_level)
return 0;
ret = guc_log_control(guc, log_param.value);
......@@ -592,11 +588,12 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
}
if (log_param.logging_enabled) {
i915_modparams.guc_log_level = log_param.verbosity;
i915_modparams.guc_log_level = 1 + log_param.verbosity;
/* If log_level was set as -1 at boot time, then the relay channel file
* wouldn't have been created by now and interrupts also would not have
* been enabled. Try again now, just in case.
/*
* If log was disabled at boot time, then the relay channel file
* wouldn't have been created by now and interrupts also would
* not have been enabled. Try again now, just in case.
*/
ret = guc_log_late_setup(guc);
if (ret < 0) {
......@@ -607,7 +604,8 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
/* GuC logging is currently the only user of Guc2Host interrupts */
gen9_enable_guc_interrupts(dev_priv);
} else {
/* Once logging is disabled, GuC won't generate logs & send an
/*
* Once logging is disabled, GuC won't generate logs & send an
* interrupt. But there could be some data in the log buffer
* which is yet to be captured. So request GuC to update the log
* buffer state and then collect the left over logs.
......@@ -615,7 +613,7 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
guc_flush_logs(guc);
/* As logging is disabled, update log level to reflect that */
i915_modparams.guc_log_level = -1;
i915_modparams.guc_log_level = 0;
}
return ret;
......@@ -623,8 +621,7 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
void i915_guc_log_register(struct drm_i915_private *dev_priv)
{
if (!USES_GUC_SUBMISSION(dev_priv) ||
(i915_modparams.guc_log_level < 0))
if (!USES_GUC_SUBMISSION(dev_priv) || !i915_modparams.guc_log_level)
return;
mutex_lock(&dev_priv->drm.struct_mutex);
......
......@@ -65,6 +65,21 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv)
return enable_guc;
}
static int __get_default_guc_log_level(struct drm_i915_private *dev_priv)
{
int guc_log_level = 0; /* disabled */
/* Enable if we're running on platform with GuC and debug config */
if (HAS_GUC(dev_priv) && intel_uc_is_using_guc() &&
(IS_ENABLED(CONFIG_DRM_I915_DEBUG) ||
IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)))
guc_log_level = 1 + GUC_LOG_VERBOSITY_MAX;
/* Any platform specific fine-tuning can be done here */
return guc_log_level;
}
/**
* intel_uc_sanitize_options - sanitize uC related modparam options
* @dev_priv: device private
......@@ -74,6 +89,13 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv)
* modparam varies between platforms and it is hardcoded in driver code.
* Any other modparam value is only monitored against availability of the
* related hardware or firmware definitions.
*
* In case of "guc_log_level" option this function will attempt to modify
* it only if it was initially set to "auto(-1)" or if initial value was
* "enable(1..4)" on platforms without the GuC. Default value for this
* modparam varies between platforms and is usually set to "disable(0)"
* unless GuC is enabled on given platform and the driver is compiled with
* debug config when this modparam will default to "enable(1..4)".
*/
void intel_uc_sanitize_options(struct drm_i915_private *dev_priv)
{
......@@ -91,22 +113,48 @@ void intel_uc_sanitize_options(struct drm_i915_private *dev_priv)
/* Verify GuC firmware availability */
if (intel_uc_is_using_guc() && !intel_uc_fw_is_selected(guc_fw)) {
DRM_WARN("Incompatible option detected: enable_guc=%d, %s!\n",
i915_modparams.enable_guc,
DRM_WARN("Incompatible option detected: %s=%d, %s!\n",
"enable_guc", i915_modparams.enable_guc,
!HAS_GUC(dev_priv) ? "no GuC hardware" :
"no GuC firmware");
}
/* Verify HuC firmware availability */
if (intel_uc_is_using_huc() && !intel_uc_fw_is_selected(huc_fw)) {
DRM_WARN("Incompatible option detected: enable_guc=%d, %s!\n",
i915_modparams.enable_guc,
DRM_WARN("Incompatible option detected: %s=%d, %s!\n",
"enable_guc", i915_modparams.enable_guc,
!HAS_HUC(dev_priv) ? "no HuC hardware" :
"no HuC firmware");
}
/* A negative value means "use platform/config default" */
if (i915_modparams.guc_log_level < 0)
i915_modparams.guc_log_level =
__get_default_guc_log_level(dev_priv);
if (i915_modparams.guc_log_level > 0 && !intel_uc_is_using_guc()) {
DRM_WARN("Incompatible option detected: %s=%d, %s!\n",
"guc_log_level", i915_modparams.guc_log_level,
!HAS_GUC(dev_priv) ? "no GuC hardware" :
"GuC not enabled");
i915_modparams.guc_log_level = 0;
}
if (i915_modparams.guc_log_level > 1 + GUC_LOG_VERBOSITY_MAX) {
DRM_WARN("Incompatible option detected: %s=%d, %s!\n",
"guc_log_level", i915_modparams.guc_log_level,
"verbosity too high");
i915_modparams.guc_log_level = 1 + GUC_LOG_VERBOSITY_MAX;
}
DRM_DEBUG_DRIVER("guc_log_level=%d (enabled:%s verbosity:%d)\n",
i915_modparams.guc_log_level,
yesno(i915_modparams.guc_log_level),
i915_modparams.guc_log_level - 1);
/* Make sure that sanitization was done */
GEM_BUG_ON(i915_modparams.enable_guc < 0);
GEM_BUG_ON(i915_modparams.guc_log_level < 0);
}
void intel_uc_init_early(struct drm_i915_private *dev_priv)
......@@ -152,7 +200,7 @@ void intel_uc_init_mmio(struct drm_i915_private *dev_priv)
static void guc_capture_load_err_log(struct intel_guc *guc)
{
if (!guc->log.vma || i915_modparams.guc_log_level < 0)
if (!guc->log.vma || !i915_modparams.guc_log_level)
return;
if (!guc->load_err_log)
......@@ -322,7 +370,7 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
}
if (USES_GUC_SUBMISSION(dev_priv)) {
if (i915_modparams.guc_log_level >= 0)
if (i915_modparams.guc_log_level)
gen9_enable_guc_interrupts(dev_priv);
ret = intel_guc_submission_enable(guc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment