Commit 0f8dc2f0 authored by Andi Kleen's avatar Andi Kleen Committed by Linus Torvalds

Revert HPET resource reservation

Matthias Lenk reports that the PCI subsystem would move the HPET on
SB400/SB600-based systems, where the HPET is in BAR1 of the SMbus
controller.

The reason? The ACPI layer registered the PCI MMIO range as being busy
too early, before PCI enumeration had happened, causing the PCI layer to
decide that it should relocate the resources somewhere else.

Firmware resources should be marked busy _after_ the PCI enumeration and
probing has happened, not before.

Remove the too-early reservation, we'll fix it up to do it properly
later.  In the meantime, this solves the regression.
Tested-by: default avatarMatthias Lenk <matthias.lenk@amd.com>
Cc: Aaron Durbin <adurbin@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 9d7542f8
...@@ -636,29 +636,10 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) ...@@ -636,29 +636,10 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
return -1; return -1;
} }
#define HPET_RESOURCE_NAME_SIZE 9
hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE);
if (hpet_res) {
memset(hpet_res, 0, sizeof(*hpet_res));
hpet_res->name = (void *)&hpet_res[1];
hpet_res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE,
"HPET %u", hpet_tbl->sequence);
hpet_res->end = (1 * 1024) - 1;
}
hpet_address = hpet_tbl->address.address; hpet_address = hpet_tbl->address.address;
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
hpet_tbl->id, hpet_address); hpet_tbl->id, hpet_address);
res_start = hpet_address;
if (hpet_res) {
hpet_res->start = res_start;
hpet_res->end += res_start;
insert_resource(&iomem_resource, hpet_res);
}
return 0; return 0;
} }
#else #else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment