net/mlx5e: Add support for hw decapsulation of MPLS over UDP
MPLS over UDP is supported in hardware by using a packet reformat object with reformat type equal L3_TUNNEL_TO_L2 which both decapsulates the outer L3, L4 and MPLS headers, and allows for setting the L2 headers of the resulting decapsulated packet. For the hardware to operate correctly, the configuration of the firmware must have FLEX_PARSER_PROFILE_ENABLE = 1. Example tc rule: tc filter add dev bareudp0 protocol all prio 1 root flower enc_dst_port \ 6635 enc_src_ip 8.8.8.23 action mpls pop protocol ip pipe \ action pedit ex munge eth dst set 00:11:22:33:44:21 pipe action \ mirred egress redirect dev enp59s0f0_0 We use pedit to set the correct destination MAC. For MPLS over UDP decapsulation to take place, the driver logic requires the following: 1. flower filter added on bareudp device. 2. action mpls pop 3. zero or more pedit munge actions 4. one redirect action Current implementation supports only IPv4 and no VLAN. tc filter show output looks like this: filter protocol all pref 1 flower chain 0 filter protocol all pref 1 flower chain 0 handle 0x1 enc_src_ip 8.8.8.24 enc_dst_port 6635 in_hw in_hw_count 1 action order 1: mpls pop protocol ip pipe index 2 ref 1 bind 1 action order 2: pedit action pipe keys 2 index 1 ref 1 bind 1 key #0 at eth+0: val 00112233 mask 00000000 key #1 at eth+4: val 44210000 mask 0000ffff action order 3: mirred (Egress Redirect to device enp59s0f0_0) stolen index 2 ref 1 bind 1 Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Showing
Please register or sign in to comment