Commit 15d90a6a authored by Akihiro Tsukada's avatar Akihiro Tsukada Committed by Mauro Carvalho Chehab

media: dvb/earth-pt1: fix wrong initialization for demod blocks

earth-pt1 driver was decomposed/restructured by the commit b732539e
("media: dvb: earth-pt1: decompose pt1 driver into sub drivers"),
but it introduced a problem regarding concurrent streaming:
Opening a new terrestial stream stops the reception of an existing,
already-opened satellite stream.

The demod IC in earth-pt1 boards contains 2 pairs of terr. and sat. blocks,
supporting 4 concurrent demodulations, and the above problem was because
the config of a terr. block contained whole reset/init of the pair blocks,
thus each open() of a terrestrial frontend wrongly cleared the config of
its peer satellite block of the demod.
This whole/pair reset should be executed earlier and not on each open().

Fixes: b732539e ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers")
Signed-off-by: default avatarAkihiro Tsukada <tskd08@gmail.com>
Signed-off-by: default avatarSean Young <sean@mess.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent c310d1f9
......@@ -200,16 +200,10 @@ static const u8 va1j5jf8007t_25mhz_configs[][2] = {
static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk)
{
int ret;
u8 buf[2] = {0x01, 0x80};
bool is_sat;
const u8 (*cfg_data)[2];
int i, len;
ret = i2c_master_send(cl, buf, 2);
if (ret < 0)
return ret;
usleep_range(30000, 50000);
is_sat = !strncmp(cl->name, TC90522_I2C_DEV_SAT,
strlen(TC90522_I2C_DEV_SAT));
if (is_sat) {
......@@ -260,6 +254,46 @@ static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk)
return 0;
}
/*
* Init registers for (each pair of) terrestrial/satellite block in demod.
* Note that resetting terr. block also resets its peer sat. block as well.
* This function must be called before configuring any demod block
* (before pt1_wakeup(), fe->ops.init()).
*/
static int pt1_demod_block_init(struct pt1 *pt1)
{
struct i2c_client *cl;
u8 buf[2] = {0x01, 0x80};
int ret;
int i;
/* reset all terr. & sat. pairs first */
for (i = 0; i < PT1_NR_ADAPS; i++) {
cl = pt1->adaps[i]->demod_i2c_client;
if (strncmp(cl->name, TC90522_I2C_DEV_TER,
strlen(TC90522_I2C_DEV_TER)))
continue;
ret = i2c_master_send(cl, buf, 2);
if (ret < 0)
return ret;
usleep_range(30000, 50000);
}
for (i = 0; i < PT1_NR_ADAPS; i++) {
cl = pt1->adaps[i]->demod_i2c_client;
if (strncmp(cl->name, TC90522_I2C_DEV_SAT,
strlen(TC90522_I2C_DEV_SAT)))
continue;
ret = i2c_master_send(cl, buf, 2);
if (ret < 0)
return ret;
usleep_range(30000, 50000);
}
return 0;
}
static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data)
{
writel(data, pt1->regs + reg * 4);
......@@ -987,6 +1021,10 @@ static int pt1_init_frontends(struct pt1 *pt1)
goto tuner_release;
}
ret = pt1_demod_block_init(pt1);
if (ret < 0)
goto fe_unregister;
return 0;
tuner_release:
......@@ -1245,6 +1283,10 @@ static int pt1_resume(struct device *dev)
pt1_update_power(pt1);
usleep_range(1000, 2000);
ret = pt1_demod_block_init(pt1);
if (ret < 0)
goto resume_err;
for (i = 0; i < PT1_NR_ADAPS; i++)
dvb_frontend_reinitialise(pt1->adaps[i]->fe);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment