Merge tag 'renesas-soc-for-v3.16' of...

Merge tag 'renesas-soc-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC Updates for v3.16" from Simon Horman:

SH Mobile shared SoC code
* Add shared shmobile_init_delay()

r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs (R-Car Gen2 shared code)
* Cache Mode Monitor Register Value

r8a7791 (R-Car M2) SoC
Check r8a7791 MD21 at SMP boot

r8a7790 (R-Car H2) SoC
* Make use of r8a7790_add_standard_devices()
* Update r8a7791 CPU freq to 1500MHz

r8a7778 (R-Car M1) SoC
* Move "select RENESAS_INTC_IRQPIN" under SoC

emev2 (Emma Mobale EV2) SoC
*  Remove legacy EMEV2 SoC support

* tag 'renesas-soc-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7778/bockw: Move "select RENESAS_INTC_IRQPIN" under SoC
  ARM: shmobile: Check r8a7791 MD21 at SMP boot
  ARM: shmobile: rcar-gen2: Cache Mode Monitor Register Value
  ARM: shmobile: Make use of r8a7790_add_standard_devices()
  ARM: shmobile: Remove EMEV2 header file
  ARM: shmobile: Remove legacy EMEV2 SoC support
  ARM: shmobile: Add shared shmobile_init_delay()
  ARM: shmobile: Update r8a7791 CPU freq to 1500MHz in C
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -297,8 +297,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
 	r7s72100-genmai-reference.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \

arch/arm/mach-shmobile/Kconfig

@@ -108,6 +108,7 @@ config ARCH_R8A7778
 	select SH_CLK_CPG
 	select ARM_GIC
 	select SYS_SUPPORTS_SH_TMU
+	select RENESAS_INTC_IRQPIN
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
@@ -140,16 +141,6 @@ config ARCH_R8A7791
 	select SYS_SUPPORTS_SH_CMT
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 
-config ARCH_EMEV2
-	bool "Emma Mobile EV2"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select CPU_V7
-	select MIGHT_HAVE_PCI
-	select USE_OF
-	select AUTO_ZRELADDR
-	select SYS_SUPPORTS_EM_STI
-
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -216,7 +207,6 @@ config MACH_BOCKW
 	depends on ARCH_R8A7778
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select RENESAS_INTC_IRQPIN
 	select SND_SOC_AK4554 if SND_SIMPLE_CARD
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select USE_OF
@@ -225,7 +215,6 @@ config MACH_BOCKW_REFERENCE
 	bool "BOCK-W  - Reference Device Tree Implementation"
 	depends on ARCH_R8A7778
 	select ARCH_REQUIRE_GPIOLIB
-	select RENESAS_INTC_IRQPIN
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 	---help---

arch/arm/mach-shmobile/Makefile

@@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
-obj-$(CONFIG_ARCH_EMEV2)	+= clock-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
 endif
 

arch/arm/mach-shmobile/clock-emev2.c

-/*
- * Emma Mobile EV2 clock framework support
- *
- * Copyright (C) 2012  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-#define EMEV2_SMU_BASE 0xe0110000
-
-/* EMEV2 SMU registers */
-#define USIAU0_RSTCTRL 0x094
-#define USIBU1_RSTCTRL 0x0ac
-#define USIBU2_RSTCTRL 0x0b0
-#define USIBU3_RSTCTRL 0x0b4
-#define STI_RSTCTRL 0x124
-#define USIAU0GCLKCTRL 0x4a0
-#define USIBU1GCLKCTRL 0x4b8
-#define USIBU2GCLKCTRL 0x4bc
-#define USIBU3GCLKCTRL 0x04c0
-#define STIGCLKCTRL 0x528
-#define USIAU0SCLKDIV 0x61c
-#define USIB2SCLKDIV 0x65c
-#define USIB3SCLKDIV 0x660
-#define STI_CLKSEL 0x688
-
-/* not pretty, but hey */
-static void __iomem *smu_base;
-
-static void emev2_smu_write(unsigned long value, int offs)
-{
-	BUG_ON(!smu_base || (offs >= PAGE_SIZE));
-	iowrite32(value, smu_base + offs);
-}
-
-static struct clk_mapping smu_mapping = {
-	.phys	= EMEV2_SMU_BASE,
-	.len	= PAGE_SIZE,
-};
-
-/* Fixed 32 KHz root clock from C32K pin */
-static struct clk c32k_clk = {
-	.rate           = 32768,
-	.mapping	= &smu_mapping,
-};
-
-/* PLL3 multiplies C32K with 7000 */
-static unsigned long pll3_recalc(struct clk *clk)
-{
-	return clk->parent->rate * 7000;
-}
-
-static struct sh_clk_ops pll3_clk_ops = {
-	.recalc		= pll3_recalc,
-};
-
-static struct clk pll3_clk = {
-	.ops		= &pll3_clk_ops,
-	.parent		= &c32k_clk,
-};
-
-static struct clk *main_clks[] = {
-	&c32k_clk,
-	&pll3_clk,
-};
-
-enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3,
-	SCLKDIV_NR };
-
-#define SCLKDIV(_reg, _shift)			\
-{								\
-	.parent		= &pll3_clk,				\
-	.enable_reg	= IOMEM(EMEV2_SMU_BASE + (_reg)),	\
-	.enable_bit	= _shift,				\
-}
-
-static struct clk sclkdiv_clks[SCLKDIV_NR] = {
-	[SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0),
-	[SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16),
-	[SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0),
-	[SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0),
-};
-
-enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK,
-	GCLK_STI_SCLK,
-	GCLK_NR };
-
-#define GCLK_SCLK(_parent, _reg) \
-{								\
-	.parent		= _parent,				\
-	.enable_reg	= IOMEM(EMEV2_SMU_BASE + (_reg)),	\
-	.enable_bit	= 1, /* SCLK_GCC */			\
-}
-
-static struct clk gclk_clks[GCLK_NR] = {
-	[GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0],
-				       USIAU0GCLKCTRL),
-	[GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1],
-				       USIBU1GCLKCTRL),
-	[GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2],
-				       USIBU2GCLKCTRL),
-	[GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3],
-				       USIBU3GCLKCTRL),
-	[GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL),
-};
-
-static int emev2_gclk_enable(struct clk *clk)
-{
-	iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit),
-		  clk->mapped_reg);
-	return 0;
-}
-
-static void emev2_gclk_disable(struct clk *clk)
-{
-	iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit),
-		  clk->mapped_reg);
-}
-
-static struct sh_clk_ops emev2_gclk_clk_ops = {
-	.enable		= emev2_gclk_enable,
-	.disable	= emev2_gclk_disable,
-	.recalc		= followparent_recalc,
-};
-
-static int __init emev2_gclk_register(struct clk *clks, int nr)
-{
-	struct clk *clkp;
-	int ret = 0;
-	int k;
-
-	for (k = 0; !ret && (k < nr); k++) {
-		clkp = clks + k;
-		clkp->ops = &emev2_gclk_clk_ops;
-		ret |= clk_register(clkp);
-	}
-
-	return ret;
-}
-
-static unsigned long emev2_sclkdiv_recalc(struct clk *clk)
-{
-	unsigned int sclk_div;
-
-	sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff;
-
-	return clk->parent->rate / (sclk_div + 1);
-}
-
-static struct sh_clk_ops emev2_sclkdiv_clk_ops = {
-	.recalc		= emev2_sclkdiv_recalc,
-};
-
-static int __init emev2_sclkdiv_register(struct clk *clks, int nr)
-{
-	struct clk *clkp;
-	int ret = 0;
-	int k;
-
-	for (k = 0; !ret && (k < nr); k++) {
-		clkp = clks + k;
-		clkp->ops = &emev2_sclkdiv_clk_ops;
-		ret |= clk_register(clkp);
-	}
-
-	return ret;
-}
-
-static struct clk_lookup lookups[] = {
-	CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]),
-	CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]),
-	CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]),
-	CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]),
-	CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]),
-	CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]),
-	CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]),
-	CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]),
-	CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]),
-	CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]),
-};
-
-void __init emev2_clock_init(void)
-{
-	int k, ret = 0;
-
-	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
-	BUG_ON(!smu_base);
-
-	/* setup STI timer to run on 32.768 kHz and deassert reset */
-	emev2_smu_write(0, STI_CLKSEL);
-	emev2_smu_write(1, STI_RSTCTRL);
-
-	/* deassert reset for UART0->UART3 */
-	emev2_smu_write(2, USIAU0_RSTCTRL);
-	emev2_smu_write(2, USIBU1_RSTCTRL);
-	emev2_smu_write(2, USIBU2_RSTCTRL);
-	emev2_smu_write(2, USIBU3_RSTCTRL);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR);
-
-	if (!ret)
-		ret = emev2_gclk_register(gclk_clks, GCLK_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup emev2 clocks\n");
-}

arch/arm/mach-shmobile/include/mach/common.h

@@ -4,6 +4,7 @@
 extern void shmobile_earlytimer_init(void);
 extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 			 unsigned int mult, unsigned int div);
+extern void shmobile_init_delay(void);
 struct twd_local_timer;
 extern void shmobile_setup_console(void);
 extern void shmobile_boot_vector(void);

arch/arm/mach-shmobile/include/mach/emev2.h

-#ifndef __ASM_EMEV2_H__
-#define __ASM_EMEV2_H__
-
-extern void emev2_map_io(void);
-extern void emev2_init_delay(void);
-extern void emev2_clock_init(void);
-extern struct smp_operations emev2_smp_ops;
-
-#endif /* __ASM_EMEV2_H__ */

arch/arm/mach-shmobile/setup-emev2.c

@@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <mach/common.h>
-#include <mach/emev2.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -38,23 +37,19 @@ static struct map_desc emev2_io_desc[] __initdata = {
 #endif
 };
 
-void __init emev2_map_io(void)
+static void __init emev2_map_io(void)
 {
 	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
 }
 
-void __init emev2_init_delay(void)
+static void __init emev2_init_delay(void)
 {
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
 }
 
 static void __init emev2_add_standard_devices_dt(void)
 {
-#ifdef CONFIG_COMMON_CLK
 	of_clk_init(NULL);
-#else
-	emev2_clock_init();
-#endif
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -63,6 +58,8 @@ static const char *emev2_boards_compat_dt[] __initconst = {
 	NULL,
 };
 
+extern struct smp_operations emev2_smp_ops;
+
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -185,12 +185,6 @@ void __init r8a7790_pinmux_init(void)
 	r8a7790_register_gpio(3);
 	r8a7790_register_gpio(4);
 	r8a7790_register_gpio(5);
-	r8a7790_register_i2c(0);
-	r8a7790_register_i2c(1);
-	r8a7790_register_i2c(2);
-	r8a7790_register_i2c(3);
-	r8a7790_register_audio_dmac(0);
-	r8a7790_register_audio_dmac(1);
 }
 
 #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq)		\
@@ -308,6 +302,12 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_add_dt_devices();
 	r8a7790_register_irqc(0);
 	r8a7790_register_thermal();
+	r8a7790_register_i2c(0);
+	r8a7790_register_i2c(1);
+	r8a7790_register_i2c(2);
+	r8a7790_register_i2c(3);
+	r8a7790_register_audio_dmac(0);
+	r8a7790_register_audio_dmac(1);
 }
 
 void __init r8a7790_init_early(void)

arch/arm/mach-shmobile/setup-r8a7791.c

@@ -213,7 +213,7 @@ void __init r8a7791_add_standard_devices(void)
 void __init r8a7791_init_early(void)
 {
 #ifndef CONFIG_ARM_ARCH_TIMER
-	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
 #endif
 }
 

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -30,12 +30,16 @@
 
 u32 rcar_gen2_read_mode_pins(void)
 {
-	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
-	u32 mode;
+	static u32 mode;
+	static bool mode_valid;
 
+	if (!mode_valid) {
+		void __iomem *modemr = ioremap_nocache(MODEMR, 4);
 		BUG_ON(!modemr);
 		mode = ioread32(modemr);
 		iounmap(modemr);
+		mode_valid = true;
+	}
 
 	return mode;
 }

arch/arm/mach-shmobile/smp-emev2.c

@@ -24,7 +24,6 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/common.h>
-#include <mach/emev2.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 

arch/arm/mach-shmobile/smp-r8a7791.c

@@ -20,6 +20,7 @@
 #include <asm/smp_plat.h>
 #include <mach/common.h>
 #include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
 
 #define RST		0xe6160000
 #define CA15BAR		0x0020
@@ -51,9 +52,21 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
 	iounmap(p);
 }
 
+static int r8a7791_smp_boot_secondary(unsigned int cpu,
+				      struct task_struct *idle)
+{
+	/* Error out when hardware debug mode is enabled */
+	if (rcar_gen2_read_mode_pins() & BIT(21)) {
+		pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
+		return -ENOTSUPP;
+	}
+
+	return shmobile_smp_apmu_boot_secondary(cpu, idle);
+}
+
 struct smp_operations r8a7791_smp_ops __initdata = {
 	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
-	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+	.smp_boot_secondary	= r8a7791_smp_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= shmobile_smp_cpu_disable,
 	.cpu_die		= shmobile_smp_apmu_cpu_die,

arch/arm/mach-shmobile/timer.c

@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/clocksource.h>
 #include <linux/delay.h>
+#include <linux/of_address.h>
 
 void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 				 unsigned int mult, unsigned int div)
@@ -39,6 +40,33 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 		preset_lpj = max_cpu_core_mhz * value;
 }
 
+void __init shmobile_init_delay(void)
+{
+	struct device_node *np, *parent;
+	u32 max_freq, freq;
+
+	max_freq = 0;
+
+	parent = of_find_node_by_path("/cpus");
+	if (parent) {
+		for_each_child_of_node(parent, np) {
+			if (!of_property_read_u32(np, "clock-frequency", &freq))
+				max_freq = max(max_freq, freq);
+		}
+		of_node_put(parent);
+	}
+
+	if (max_freq) {
+		if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
+			shmobile_setup_delay(max_freq, 1, 3);
+		else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
+			shmobile_setup_delay(max_freq, 1, 3);
+		else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
+			if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+				shmobile_setup_delay(max_freq, 2, 4);
+	}
+}
+
 static void __init shmobile_late_time_init(void)
 {
 	/*