abx500-chargalg: Add abx500 charging algorithm

This is a charging algorithm driver for abx500 variants. It is the central
entity for battery driver and is responsible for charging and monitoring
the battery driver. It is a hardware independant driver and also monitors
other abx500 power supply devices.
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>

drivers/power/abx500_chargalg.c

+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Charging algorithm driver for abx500 variants
+ *
+ * License Terms: GNU General Public License v2
+ * Authors:
+ *	Johan Palsson <johan.palsson@stericsson.com>
+ *	Karl Komierowski <karl.komierowski@stericsson.com>
+ *	Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ux500_chargalg.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+
+/* Watchdog kick interval */
+#define CHG_WD_INTERVAL			(6 * HZ)
+
+/* End-of-charge criteria counter */
+#define EOC_COND_CNT			10
+
+/* Recharge criteria counter */
+#define RCH_COND_CNT			3
+
+#define to_abx500_chargalg_device_info(x) container_of((x), \
+	struct abx500_chargalg, chargalg_psy);
+
+enum abx500_chargers {
+	NO_CHG,
+	AC_CHG,
+	USB_CHG,
+};
+
+struct abx500_chargalg_charger_info {
+	enum abx500_chargers conn_chg;
+	enum abx500_chargers prev_conn_chg;
+	enum abx500_chargers online_chg;
+	enum abx500_chargers prev_online_chg;
+	enum abx500_chargers charger_type;
+	bool usb_chg_ok;
+	bool ac_chg_ok;
+	int usb_volt;
+	int usb_curr;
+	int ac_volt;
+	int ac_curr;
+	int usb_vset;
+	int usb_iset;
+	int ac_vset;
+	int ac_iset;
+};
+
+struct abx500_chargalg_suspension_status {
+	bool suspended_change;
+	bool ac_suspended;
+	bool usb_suspended;
+};
+
+struct abx500_chargalg_battery_data {
+	int temp;
+	int volt;
+	int avg_curr;
+	int inst_curr;
+	int percent;
+};
+
+enum abx500_chargalg_states {
+	STATE_HANDHELD_INIT,
+	STATE_HANDHELD,
+	STATE_CHG_NOT_OK_INIT,
+	STATE_CHG_NOT_OK,
+	STATE_HW_TEMP_PROTECT_INIT,
+	STATE_HW_TEMP_PROTECT,
+	STATE_NORMAL_INIT,
+	STATE_NORMAL,
+	STATE_WAIT_FOR_RECHARGE_INIT,
+	STATE_WAIT_FOR_RECHARGE,
+	STATE_MAINTENANCE_A_INIT,
+	STATE_MAINTENANCE_A,
+	STATE_MAINTENANCE_B_INIT,
+	STATE_MAINTENANCE_B,
+	STATE_TEMP_UNDEROVER_INIT,
+	STATE_TEMP_UNDEROVER,
+	STATE_TEMP_LOWHIGH_INIT,
+	STATE_TEMP_LOWHIGH,
+	STATE_SUSPENDED_INIT,
+	STATE_SUSPENDED,
+	STATE_OVV_PROTECT_INIT,
+	STATE_OVV_PROTECT,
+	STATE_SAFETY_TIMER_EXPIRED_INIT,
+	STATE_SAFETY_TIMER_EXPIRED,
+	STATE_BATT_REMOVED_INIT,
+	STATE_BATT_REMOVED,
+	STATE_WD_EXPIRED_INIT,
+	STATE_WD_EXPIRED,
+};
+
+static const char *states[] = {
+	"HANDHELD_INIT",
+	"HANDHELD",
+	"CHG_NOT_OK_INIT",
+	"CHG_NOT_OK",
+	"HW_TEMP_PROTECT_INIT",
+	"HW_TEMP_PROTECT",
+	"NORMAL_INIT",
+	"NORMAL",
+	"WAIT_FOR_RECHARGE_INIT",
+	"WAIT_FOR_RECHARGE",
+	"MAINTENANCE_A_INIT",
+	"MAINTENANCE_A",
+	"MAINTENANCE_B_INIT",
+	"MAINTENANCE_B",
+	"TEMP_UNDEROVER_INIT",
+	"TEMP_UNDEROVER",
+	"TEMP_LOWHIGH_INIT",
+	"TEMP_LOWHIGH",
+	"SUSPENDED_INIT",
+	"SUSPENDED",
+	"OVV_PROTECT_INIT",
+	"OVV_PROTECT",
+	"SAFETY_TIMER_EXPIRED_INIT",
+	"SAFETY_TIMER_EXPIRED",
+	"BATT_REMOVED_INIT",
+	"BATT_REMOVED",
+	"WD_EXPIRED_INIT",
+	"WD_EXPIRED",
+};
+
+struct abx500_chargalg_events {
+	bool batt_unknown;
+	bool mainextchnotok;
+	bool batt_ovv;
+	bool batt_rem;
+	bool btemp_underover;
+	bool btemp_lowhigh;
+	bool main_thermal_prot;
+	bool usb_thermal_prot;
+	bool main_ovv;
+	bool vbus_ovv;
+	bool usbchargernotok;
+	bool safety_timer_expired;
+	bool maintenance_timer_expired;
+	bool ac_wd_expired;
+	bool usb_wd_expired;
+	bool ac_cv_active;
+	bool usb_cv_active;
+	bool vbus_collapsed;
+};
+
+/**
+ * struct abx500_charge_curr_maximization - Charger maximization parameters
+ * @original_iset:	the non optimized/maximised charger current
+ * @current_iset:	the charging current used at this moment
+ * @test_delta_i:	the delta between the current we want to charge and the
+			current that is really going into the battery
+ * @condition_cnt:	number of iterations needed before a new charger current
+			is set
+ * @max_current:	maximum charger current
+ * @wait_cnt:		to avoid too fast current step down in case of charger
+ *			voltage collapse, we insert this delay between step
+ *			down
+ * @level:		tells in how many steps the charging current has been
+			increased
+ */
+struct abx500_charge_curr_maximization {
+	int original_iset;
+	int current_iset;
+	int test_delta_i;
+	int condition_cnt;
+	int max_current;
+	int wait_cnt;
+	u8 level;
+};
+
+enum maxim_ret {
+	MAXIM_RET_NOACTION,
+	MAXIM_RET_CHANGE,
+	MAXIM_RET_IBAT_TOO_HIGH,
+};
+
+/**
+ * struct abx500_chargalg - abx500 Charging algorithm device information
+ * @dev:		pointer to the structure device
+ * @charge_status:	battery operating status
+ * @eoc_cnt:		counter used to determine end-of_charge
+ * @rch_cnt:		counter used to determine start of recharge
+ * @maintenance_chg:	indicate if maintenance charge is active
+ * @t_hyst_norm		temperature hysteresis when the temperature has been
+ *			over or under normal limits
+ * @t_hyst_lowhigh	temperature hysteresis when the temperature has been
+ *			over or under the high or low limits
+ * @charge_state:	current state of the charging algorithm
+ * @ccm			charging current maximization parameters
+ * @chg_info:		information about connected charger types
+ * @batt_data:		data of the battery
+ * @susp_status:	current charger suspension status
+ * @pdata:		pointer to the abx500_chargalg platform data
+ * @bat:		pointer to the abx500_bm platform data
+ * @chargalg_psy:	structure that holds the battery properties exposed by
+ *			the charging algorithm
+ * @events:		structure for information about events triggered
+ * @chargalg_wq:		work queue for running the charging algorithm
+ * @chargalg_periodic_work:	work to run the charging algorithm periodically
+ * @chargalg_wd_work:		work to kick the charger watchdog periodically
+ * @chargalg_work:		work to run the charging algorithm instantly
+ * @safety_timer:		charging safety timer
+ * @maintenance_timer:		maintenance charging timer
+ * @chargalg_kobject:		structure of type kobject
+ */
+struct abx500_chargalg {
+	struct device *dev;
+	int charge_status;
+	int eoc_cnt;
+	int rch_cnt;
+	bool maintenance_chg;
+	int t_hyst_norm;
+	int t_hyst_lowhigh;
+	enum abx500_chargalg_states charge_state;
+	struct abx500_charge_curr_maximization ccm;
+	struct abx500_chargalg_charger_info chg_info;
+	struct abx500_chargalg_battery_data batt_data;
+	struct abx500_chargalg_suspension_status susp_status;
+	struct abx500_chargalg_platform_data *pdata;
+	struct abx500_bm_data *bat;
+	struct power_supply chargalg_psy;
+	struct ux500_charger *ac_chg;
+	struct ux500_charger *usb_chg;
+	struct abx500_chargalg_events events;
+	struct workqueue_struct *chargalg_wq;
+	struct delayed_work chargalg_periodic_work;
+	struct delayed_work chargalg_wd_work;
+	struct work_struct chargalg_work;
+	struct timer_list safety_timer;
+	struct timer_list maintenance_timer;
+	struct kobject chargalg_kobject;
+};
+
+/* Main battery properties */
+static enum power_supply_property abx500_chargalg_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+};
+
+/**
+ * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer
+ * @data:	pointer to the abx500_chargalg structure
+ *
+ * This function gets called when the safety timer for the charger
+ * expires
+ */
+static void abx500_chargalg_safety_timer_expired(unsigned long data)
+{
+	struct abx500_chargalg *di = (struct abx500_chargalg *) data;
+	dev_err(di->dev, "Safety timer expired\n");
+	di->events.safety_timer_expired = true;
+
+	/* Trigger execution of the algorithm instantly */
+	queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * abx500_chargalg_maintenance_timer_expired() - Expiration of
+ * the maintenance timer
+ * @i:		pointer to the abx500_chargalg structure
+ *
+ * This function gets called when the maintenence timer
+ * expires
+ */
+static void abx500_chargalg_maintenance_timer_expired(unsigned long data)
+{
+
+	struct abx500_chargalg *di = (struct abx500_chargalg *) data;
+	dev_dbg(di->dev, "Maintenance timer expired\n");
+	di->events.maintenance_timer_expired = true;
+
+	/* Trigger execution of the algorithm instantly */
+	queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * abx500_chargalg_state_to() - Change charge state
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * This function gets called when a charge state change should occur
+ */
+static void abx500_chargalg_state_to(struct abx500_chargalg *di,
+	enum abx500_chargalg_states state)
+{
+	dev_dbg(di->dev,
+		"State changed: %s (From state: [%d] %s =to=> [%d] %s )\n",
+		di->charge_state == state ? "NO" : "YES",
+		di->charge_state,
+		states[di->charge_state],
+		state,
+		states[state]);
+
+	di->charge_state = state;
+}
+
+/**
+ * abx500_chargalg_check_charger_connection() - Check charger connection change
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * This function will check if there is a change in the charger connection
+ * and change charge state accordingly. AC has precedence over USB.
+ */
+static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di)
+{
+	if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg ||
+		di->susp_status.suspended_change) {
+		/*
+		 * Charger state changed or suspension
+		 * has changed since last update
+		 */
+		if ((di->chg_info.conn_chg & AC_CHG) &&
+			!di->susp_status.ac_suspended) {
+			dev_dbg(di->dev, "Charging source is AC\n");
+			if (di->chg_info.charger_type != AC_CHG) {
+				di->chg_info.charger_type = AC_CHG;
+				abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+			}
+		} else if ((di->chg_info.conn_chg & USB_CHG) &&
+			!di->susp_status.usb_suspended) {
+			dev_dbg(di->dev, "Charging source is USB\n");
+			di->chg_info.charger_type = USB_CHG;
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		} else if (di->chg_info.conn_chg &&
+			(di->susp_status.ac_suspended ||
+			di->susp_status.usb_suspended)) {
+			dev_dbg(di->dev, "Charging is suspended\n");
+			di->chg_info.charger_type = NO_CHG;
+			abx500_chargalg_state_to(di, STATE_SUSPENDED_INIT);
+		} else {
+			dev_dbg(di->dev, "Charging source is OFF\n");
+			di->chg_info.charger_type = NO_CHG;
+			abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
+		}
+		di->chg_info.prev_conn_chg = di->chg_info.conn_chg;
+		di->susp_status.suspended_change = false;
+	}
+	return di->chg_info.conn_chg;
+}
+
+/**
+ * abx500_chargalg_start_safety_timer() - Start charging safety timer
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * The safety timer is used to avoid overcharging of old or bad batteries.
+ * There are different timers for AC and USB
+ */
+static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
+{
+	unsigned long timer_expiration = 0;
+
+	switch (di->chg_info.charger_type) {
+	case AC_CHG:
+		timer_expiration =
+		round_jiffies(jiffies +
+			(di->bat->main_safety_tmr_h * 3600 * HZ));
+		break;
+
+	case USB_CHG:
+		timer_expiration =
+		round_jiffies(jiffies +
+			(di->bat->usb_safety_tmr_h * 3600 * HZ));
+		break;
+
+	default:
+		dev_err(di->dev, "Unknown charger to charge from\n");
+		break;
+	}
+
+	di->events.safety_timer_expired = false;
+	di->safety_timer.expires = timer_expiration;
+	if (!timer_pending(&di->safety_timer))
+		add_timer(&di->safety_timer);
+	else
+		mod_timer(&di->safety_timer, timer_expiration);
+}
+
+/**
+ * abx500_chargalg_stop_safety_timer() - Stop charging safety timer
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * The safety timer is stopped whenever the NORMAL state is exited
+ */
+static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di)
+{
+	di->events.safety_timer_expired = false;
+	del_timer(&di->safety_timer);
+}
+
+/**
+ * abx500_chargalg_start_maintenance_timer() - Start charging maintenance timer
+ * @di:		pointer to the abx500_chargalg structure
+ * @duration:	duration of ther maintenance timer in hours
+ *
+ * The maintenance timer is used to maintain the charge in the battery once
+ * the battery is considered full. These timers are chosen to match the
+ * discharge curve of the battery
+ */
+static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di,
+	int duration)
+{
+	unsigned long timer_expiration;
+
+	/* Convert from hours to jiffies */
+	timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ));
+
+	di->events.maintenance_timer_expired = false;
+	di->maintenance_timer.expires = timer_expiration;
+	if (!timer_pending(&di->maintenance_timer))
+		add_timer(&di->maintenance_timer);
+	else
+		mod_timer(&di->maintenance_timer, timer_expiration);
+}
+
+/**
+ * abx500_chargalg_stop_maintenance_timer() - Stop maintenance timer
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * The maintenance timer is stopped whenever maintenance ends or when another
+ * state is entered
+ */
+static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di)
+{
+	di->events.maintenance_timer_expired = false;
+	del_timer(&di->maintenance_timer);
+}
+
+/**
+ * abx500_chargalg_kick_watchdog() - Kick charger watchdog
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * The charger watchdog have to be kicked periodically whenever the charger is
+ * on, else the ABB will reset the system
+ */
+static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di)
+{
+	/* Check if charger exists and kick watchdog if charging */
+	if (di->ac_chg && di->ac_chg->ops.kick_wd &&
+			di->chg_info.online_chg & AC_CHG)
+		return di->ac_chg->ops.kick_wd(di->ac_chg);
+	else if (di->usb_chg && di->usb_chg->ops.kick_wd &&
+			di->chg_info.online_chg & USB_CHG)
+		return di->usb_chg->ops.kick_wd(di->usb_chg);
+
+	return -ENXIO;
+}
+
+/**
+ * abx500_chargalg_ac_en() - Turn on/off the AC charger
+ * @di:		pointer to the abx500_chargalg structure
+ * @enable:	charger on/off
+ * @vset:	requested charger output voltage
+ * @iset:	requested charger output current
+ *
+ * The AC charger will be turned on/off with the requested charge voltage and
+ * current
+ */
+static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable,
+	int vset, int iset)
+{
+	if (!di->ac_chg || !di->ac_chg->ops.enable)
+		return -ENXIO;
+
+	/* Select maximum of what both the charger and the battery supports */
+	if (di->ac_chg->max_out_volt)
+		vset = min(vset, di->ac_chg->max_out_volt);
+	if (di->ac_chg->max_out_curr)
+		iset = min(iset, di->ac_chg->max_out_curr);
+
+	di->chg_info.ac_iset = iset;
+	di->chg_info.ac_vset = vset;
+
+	return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset);
+}
+
+/**
+ * abx500_chargalg_usb_en() - Turn on/off the USB charger
+ * @di:		pointer to the abx500_chargalg structure
+ * @enable:	charger on/off
+ * @vset:	requested charger output voltage
+ * @iset:	requested charger output current
+ *
+ * The USB charger will be turned on/off with the requested charge voltage and
+ * current
+ */
+static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable,
+	int vset, int iset)
+{
+	if (!di->usb_chg || !di->usb_chg->ops.enable)
+		return -ENXIO;
+
+	/* Select maximum of what both the charger and the battery supports */
+	if (di->usb_chg->max_out_volt)
+		vset = min(vset, di->usb_chg->max_out_volt);
+	if (di->usb_chg->max_out_curr)
+		iset = min(iset, di->usb_chg->max_out_curr);
+
+	di->chg_info.usb_iset = iset;
+	di->chg_info.usb_vset = vset;
+
+	return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset);
+}
+
+/**
+ * abx500_chargalg_update_chg_curr() - Update charger current
+ * @di:		pointer to the abx500_chargalg structure
+ * @iset:	requested charger output current
+ *
+ * The charger output current will be updated for the charger
+ * that is currently in use
+ */
+static int abx500_chargalg_update_chg_curr(struct abx500_chargalg *di,
+		int iset)
+{
+	/* Check if charger exists and update current if charging */
+	if (di->ac_chg && di->ac_chg->ops.update_curr &&
+			di->chg_info.charger_type & AC_CHG) {
+		/*
+		 * Select maximum of what both the charger
+		 * and the battery supports
+		 */
+		if (di->ac_chg->max_out_curr)
+			iset = min(iset, di->ac_chg->max_out_curr);
+
+		di->chg_info.ac_iset = iset;
+
+		return di->ac_chg->ops.update_curr(di->ac_chg, iset);
+	} else if (di->usb_chg && di->usb_chg->ops.update_curr &&
+			di->chg_info.charger_type & USB_CHG) {
+		/*
+		 * Select maximum of what both the charger
+		 * and the battery supports
+		 */
+		if (di->usb_chg->max_out_curr)
+			iset = min(iset, di->usb_chg->max_out_curr);
+
+		di->chg_info.usb_iset = iset;
+
+		return di->usb_chg->ops.update_curr(di->usb_chg, iset);
+	}
+
+	return -ENXIO;
+}
+
+/**
+ * abx500_chargalg_stop_charging() - Stop charging
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * This function is called from any state where charging should be stopped.
+ * All charging is disabled and all status parameters and timers are changed
+ * accordingly
+ */
+static void abx500_chargalg_stop_charging(struct abx500_chargalg *di)
+{
+	abx500_chargalg_ac_en(di, false, 0, 0);
+	abx500_chargalg_usb_en(di, false, 0, 0);
+	abx500_chargalg_stop_safety_timer(di);
+	abx500_chargalg_stop_maintenance_timer(di);
+	di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	di->maintenance_chg = false;
+	cancel_delayed_work(&di->chargalg_wd_work);
+	power_supply_changed(&di->chargalg_psy);
+}
+
+/**
+ * abx500_chargalg_hold_charging() - Pauses charging
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * This function is called in the case where maintenance charging has been
+ * disabled and instead a battery voltage mode is entered to check when the
+ * battery voltage has reached a certain recharge voltage
+ */
+static void abx500_chargalg_hold_charging(struct abx500_chargalg *di)
+{
+	abx500_chargalg_ac_en(di, false, 0, 0);
+	abx500_chargalg_usb_en(di, false, 0, 0);
+	abx500_chargalg_stop_safety_timer(di);
+	abx500_chargalg_stop_maintenance_timer(di);
+	di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+	di->maintenance_chg = false;
+	cancel_delayed_work(&di->chargalg_wd_work);
+	power_supply_changed(&di->chargalg_psy);
+}
+
+/**
+ * abx500_chargalg_start_charging() - Start the charger
+ * @di:		pointer to the abx500_chargalg structure
+ * @vset:	requested charger output voltage
+ * @iset:	requested charger output current
+ *
+ * A charger will be enabled depending on the requested charger type that was
+ * detected previously.
+ */
+static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
+	int vset, int iset)
+{
+	switch (di->chg_info.charger_type) {
+	case AC_CHG:
+		dev_dbg(di->dev,
+			"AC parameters: Vset %d, Ich %d\n", vset, iset);
+		abx500_chargalg_usb_en(di, false, 0, 0);
+		abx500_chargalg_ac_en(di, true, vset, iset);
+		break;
+
+	case USB_CHG:
+		dev_dbg(di->dev,
+			"USB parameters: Vset %d, Ich %d\n", vset, iset);
+		abx500_chargalg_ac_en(di, false, 0, 0);
+		abx500_chargalg_usb_en(di, true, vset, iset);
+		break;
+
+	default:
+		dev_err(di->dev, "Unknown charger to charge from\n");
+		break;
+	}
+}
+
+/**
+ * abx500_chargalg_check_temp() - Check battery temperature ranges
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * The battery temperature is checked against the predefined limits and the
+ * charge state is changed accordingly
+ */
+static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
+{
+	if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) &&
+		di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) {
+		/* Temp OK! */
+		di->events.btemp_underover = false;
+		di->events.btemp_lowhigh = false;
+		di->t_hyst_norm = 0;
+		di->t_hyst_lowhigh = 0;
+	} else {
+		if (((di->batt_data.temp >= di->bat->temp_high) &&
+			(di->batt_data.temp <
+				(di->bat->temp_over - di->t_hyst_lowhigh))) ||
+			((di->batt_data.temp >
+				(di->bat->temp_under + di->t_hyst_lowhigh)) &&
+			(di->batt_data.temp <= di->bat->temp_low))) {
+			/* TEMP minor!!!!! */
+			di->events.btemp_underover = false;
+			di->events.btemp_lowhigh = true;
+			di->t_hyst_norm = di->bat->temp_hysteresis;
+			di->t_hyst_lowhigh = 0;
+		} else if (di->batt_data.temp <= di->bat->temp_under ||
+			di->batt_data.temp >= di->bat->temp_over) {
+			/* TEMP major!!!!! */
+			di->events.btemp_underover = true;
+			di->events.btemp_lowhigh = false;
+			di->t_hyst_norm = 0;
+			di->t_hyst_lowhigh = di->bat->temp_hysteresis;
+		} else {
+		/* Within hysteresis */
+		dev_dbg(di->dev, "Within hysteresis limit temp: %d "
+				"hyst_lowhigh %d, hyst normal %d\n",
+				di->batt_data.temp, di->t_hyst_lowhigh,
+				di->t_hyst_norm);
+		}
+	}
+}
+
+/**
+ * abx500_chargalg_check_charger_voltage() - Check charger voltage
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * Charger voltage is checked against maximum limit
+ */
+static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di)
+{
+	if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max)
+		di->chg_info.usb_chg_ok = false;
+	else
+		di->chg_info.usb_chg_ok = true;
+
+	if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max)
+		di->chg_info.ac_chg_ok = false;
+	else
+		di->chg_info.ac_chg_ok = true;
+
+}
+
+/**
+ * abx500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * End-of-charge criteria is fulfilled when the battery voltage is above a
+ * certain limit and the battery current is below a certain limit for a
+ * predefined number of consecutive seconds. If true, the battery is full
+ */
+static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
+{
+	if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
+		di->charge_state == STATE_NORMAL &&
+		!di->maintenance_chg && (di->batt_data.volt >=
+		di->bat->bat_type[di->bat->batt_id].termination_vol ||
+		di->events.usb_cv_active || di->events.ac_cv_active) &&
+		di->batt_data.avg_curr <
+		di->bat->bat_type[di->bat->batt_id].termination_curr &&
+		di->batt_data.avg_curr > 0) {
+		if (++di->eoc_cnt >= EOC_COND_CNT) {
+			di->eoc_cnt = 0;
+			di->charge_status = POWER_SUPPLY_STATUS_FULL;
+			di->maintenance_chg = true;
+			dev_dbg(di->dev, "EOC reached!\n");
+			power_supply_changed(&di->chargalg_psy);
+		} else {
+			dev_dbg(di->dev,
+				" EOC limit reached for the %d"
+				" time, out of %d before EOC\n",
+				di->eoc_cnt,
+				EOC_COND_CNT);
+		}
+	} else {
+		di->eoc_cnt = 0;
+	}
+}
+
+static void init_maxim_chg_curr(struct abx500_chargalg *di)
+{
+	di->ccm.original_iset =
+		di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
+	di->ccm.current_iset =
+		di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
+	di->ccm.test_delta_i = di->bat->maxi->charger_curr_step;
+	di->ccm.max_current = di->bat->maxi->chg_curr;
+	di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+	di->ccm.level = 0;
+}
+
+/**
+ * abx500_chargalg_chg_curr_maxim - increases the charger current to
+ *			compensate for the system load
+ * @di		pointer to the abx500_chargalg structure
+ *
+ * This maximization function is used to raise the charger current to get the
+ * battery current as close to the optimal value as possible. The battery
+ * current during charging is affected by the system load
+ */
+static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
+{
+	int delta_i;
+
+	if (!di->bat->maxi->ena_maxi)
+		return MAXIM_RET_NOACTION;
+
+	delta_i = di->ccm.original_iset - di->batt_data.inst_curr;
+
+	if (di->events.vbus_collapsed) {
+		dev_dbg(di->dev, "Charger voltage has collapsed %d\n",
+				di->ccm.wait_cnt);
+		if (di->ccm.wait_cnt == 0) {
+			dev_dbg(di->dev, "lowering current\n");
+			di->ccm.wait_cnt++;
+			di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+			di->ccm.max_current =
+				di->ccm.current_iset - di->ccm.test_delta_i;
+			di->ccm.current_iset = di->ccm.max_current;
+			di->ccm.level--;
+			return MAXIM_RET_CHANGE;
+		} else {
+			dev_dbg(di->dev, "waiting\n");
+			/* Let's go in here twice before lowering curr again */
+			di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3;
+			return MAXIM_RET_NOACTION;
+		}
+	}
+
+	di->ccm.wait_cnt = 0;
+
+	if ((di->batt_data.inst_curr > di->ccm.original_iset)) {
+		dev_dbg(di->dev, " Maximization Ibat (%dmA) too high"
+			" (limit %dmA) (current iset: %dmA)!\n",
+			di->batt_data.inst_curr, di->ccm.original_iset,
+			di->ccm.current_iset);
+
+		if (di->ccm.current_iset == di->ccm.original_iset)
+			return MAXIM_RET_NOACTION;
+
+		di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+		di->ccm.current_iset = di->ccm.original_iset;
+		di->ccm.level = 0;
+
+		return MAXIM_RET_IBAT_TOO_HIGH;
+	}
+
+	if (delta_i > di->ccm.test_delta_i &&
+		(di->ccm.current_iset + di->ccm.test_delta_i) <
+		di->ccm.max_current) {
+		if (di->ccm.condition_cnt-- == 0) {
+			/* Increse the iset with cco.test_delta_i */
+			di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+			di->ccm.current_iset += di->ccm.test_delta_i;
+			di->ccm.level++;
+			dev_dbg(di->dev, " Maximization needed, increase"
+				" with %d mA to %dmA (Optimal ibat: %d)"
+				" Level %d\n",
+				di->ccm.test_delta_i,
+				di->ccm.current_iset,
+				di->ccm.original_iset,
+				di->ccm.level);
+			return MAXIM_RET_CHANGE;
+		} else {
+			return MAXIM_RET_NOACTION;
+		}
+	}  else {
+		di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+		return MAXIM_RET_NOACTION;
+	}
+}
+
+static void handle_maxim_chg_curr(struct abx500_chargalg *di)
+{
+	enum maxim_ret ret;
+	int result;
+
+	ret = abx500_chargalg_chg_curr_maxim(di);
+	switch (ret) {
+	case MAXIM_RET_CHANGE:
+		result = abx500_chargalg_update_chg_curr(di,
+			di->ccm.current_iset);
+		if (result)
+			dev_err(di->dev, "failed to set chg curr\n");
+		break;
+	case MAXIM_RET_IBAT_TOO_HIGH:
+		result = abx500_chargalg_update_chg_curr(di,
+			di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
+		if (result)
+			dev_err(di->dev, "failed to set chg curr\n");
+		break;
+
+	case MAXIM_RET_NOACTION:
+	default:
+		/* Do nothing..*/
+		break;
+	}
+}
+
+static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data)
+{
+	struct power_supply *psy;
+	struct power_supply *ext;
+	struct abx500_chargalg *di;
+	union power_supply_propval ret;
+	int i, j;
+	bool psy_found = false;
+
+	psy = (struct power_supply *)data;
+	ext = dev_get_drvdata(dev);
+	di = to_abx500_chargalg_device_info(psy);
+	/* For all psy where the driver name appears in any supplied_to */
+	for (i = 0; i < ext->num_supplicants; i++) {
+		if (!strcmp(ext->supplied_to[i], psy->name))
+			psy_found = true;
+	}
+	if (!psy_found)
+		return 0;
+
+	/* Go through all properties for the psy */
+	for (j = 0; j < ext->num_properties; j++) {
+		enum power_supply_property prop;
+		prop = ext->properties[j];
+
+		/* Initialize chargers if not already done */
+		if (!di->ac_chg &&
+			ext->type == POWER_SUPPLY_TYPE_MAINS)
+			di->ac_chg = psy_to_ux500_charger(ext);
+		else if (!di->usb_chg &&
+			ext->type == POWER_SUPPLY_TYPE_USB)
+			di->usb_chg = psy_to_ux500_charger(ext);
+
+		if (ext->get_property(ext, prop, &ret))
+			continue;
+		switch (prop) {
+		case POWER_SUPPLY_PROP_PRESENT:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				/* Battery present */
+				if (ret.intval)
+					di->events.batt_rem = false;
+				/* Battery removed */
+				else
+					di->events.batt_rem = true;
+				break;
+			case POWER_SUPPLY_TYPE_MAINS:
+				/* AC disconnected */
+				if (!ret.intval &&
+					(di->chg_info.conn_chg & AC_CHG)) {
+					di->chg_info.prev_conn_chg =
+						di->chg_info.conn_chg;
+					di->chg_info.conn_chg &= ~AC_CHG;
+				}
+				/* AC connected */
+				else if (ret.intval &&
+					!(di->chg_info.conn_chg & AC_CHG)) {
+					di->chg_info.prev_conn_chg =
+						di->chg_info.conn_chg;
+					di->chg_info.conn_chg |= AC_CHG;
+				}
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				/* USB disconnected */
+				if (!ret.intval &&
+					(di->chg_info.conn_chg & USB_CHG)) {
+					di->chg_info.prev_conn_chg =
+						di->chg_info.conn_chg;
+					di->chg_info.conn_chg &= ~USB_CHG;
+				}
+				/* USB connected */
+				else if (ret.intval &&
+					!(di->chg_info.conn_chg & USB_CHG)) {
+					di->chg_info.prev_conn_chg =
+						di->chg_info.conn_chg;
+					di->chg_info.conn_chg |= USB_CHG;
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_ONLINE:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				break;
+			case POWER_SUPPLY_TYPE_MAINS:
+				/* AC offline */
+				if (!ret.intval &&
+					(di->chg_info.online_chg & AC_CHG)) {
+					di->chg_info.prev_online_chg =
+						di->chg_info.online_chg;
+					di->chg_info.online_chg &= ~AC_CHG;
+				}
+				/* AC online */
+				else if (ret.intval &&
+					!(di->chg_info.online_chg & AC_CHG)) {
+					di->chg_info.prev_online_chg =
+						di->chg_info.online_chg;
+					di->chg_info.online_chg |= AC_CHG;
+					queue_delayed_work(di->chargalg_wq,
+						&di->chargalg_wd_work, 0);
+				}
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				/* USB offline */
+				if (!ret.intval &&
+					(di->chg_info.online_chg & USB_CHG)) {
+					di->chg_info.prev_online_chg =
+						di->chg_info.online_chg;
+					di->chg_info.online_chg &= ~USB_CHG;
+				}
+				/* USB online */
+				else if (ret.intval &&
+					!(di->chg_info.online_chg & USB_CHG)) {
+					di->chg_info.prev_online_chg =
+						di->chg_info.online_chg;
+					di->chg_info.online_chg |= USB_CHG;
+					queue_delayed_work(di->chargalg_wq,
+						&di->chargalg_wd_work, 0);
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_HEALTH:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				break;
+			case POWER_SUPPLY_TYPE_MAINS:
+				switch (ret.intval) {
+				case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
+					di->events.mainextchnotok = true;
+					di->events.main_thermal_prot = false;
+					di->events.main_ovv = false;
+					di->events.ac_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_DEAD:
+					di->events.ac_wd_expired = true;
+					di->events.mainextchnotok = false;
+					di->events.main_ovv = false;
+					di->events.main_thermal_prot = false;
+					break;
+				case POWER_SUPPLY_HEALTH_COLD:
+				case POWER_SUPPLY_HEALTH_OVERHEAT:
+					di->events.main_thermal_prot = true;
+					di->events.mainextchnotok = false;
+					di->events.main_ovv = false;
+					di->events.ac_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
+					di->events.main_ovv = true;
+					di->events.mainextchnotok = false;
+					di->events.main_thermal_prot = false;
+					di->events.ac_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_GOOD:
+					di->events.main_thermal_prot = false;
+					di->events.mainextchnotok = false;
+					di->events.main_ovv = false;
+					di->events.ac_wd_expired = false;
+					break;
+				default:
+					break;
+				}
+				break;
+
+			case POWER_SUPPLY_TYPE_USB:
+				switch (ret.intval) {
+				case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
+					di->events.usbchargernotok = true;
+					di->events.usb_thermal_prot = false;
+					di->events.vbus_ovv = false;
+					di->events.usb_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_DEAD:
+					di->events.usb_wd_expired = true;
+					di->events.usbchargernotok = false;
+					di->events.usb_thermal_prot = false;
+					di->events.vbus_ovv = false;
+					break;
+				case POWER_SUPPLY_HEALTH_COLD:
+				case POWER_SUPPLY_HEALTH_OVERHEAT:
+					di->events.usb_thermal_prot = true;
+					di->events.usbchargernotok = false;
+					di->events.vbus_ovv = false;
+					di->events.usb_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
+					di->events.vbus_ovv = true;
+					di->events.usbchargernotok = false;
+					di->events.usb_thermal_prot = false;
+					di->events.usb_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_GOOD:
+					di->events.usbchargernotok = false;
+					di->events.usb_thermal_prot = false;
+					di->events.vbus_ovv = false;
+					di->events.usb_wd_expired = false;
+					break;
+				default:
+					break;
+				}
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				di->batt_data.volt = ret.intval / 1000;
+				break;
+			case POWER_SUPPLY_TYPE_MAINS:
+				di->chg_info.ac_volt = ret.intval / 1000;
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				di->chg_info.usb_volt = ret.intval / 1000;
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_MAINS:
+				/* AVG is used to indicate when we are
+				 * in CV mode */
+				if (ret.intval)
+					di->events.ac_cv_active = true;
+				else
+					di->events.ac_cv_active = false;
+
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				/* AVG is used to indicate when we are
+				 * in CV mode */
+				if (ret.intval)
+					di->events.usb_cv_active = true;
+				else
+					di->events.usb_cv_active = false;
+
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_TECHNOLOGY:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				if (ret.intval)
+					di->events.batt_unknown = false;
+				else
+					di->events.batt_unknown = true;
+
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_TEMP:
+			di->batt_data.temp = ret.intval / 10;
+			break;
+
+		case POWER_SUPPLY_PROP_CURRENT_NOW:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_MAINS:
+					di->chg_info.ac_curr =
+						ret.intval / 1000;
+					break;
+			case POWER_SUPPLY_TYPE_USB:
+					di->chg_info.usb_curr =
+						ret.intval / 1000;
+				break;
+			case POWER_SUPPLY_TYPE_BATTERY:
+				di->batt_data.inst_curr = ret.intval / 1000;
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_CURRENT_AVG:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				di->batt_data.avg_curr = ret.intval / 1000;
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				if (ret.intval)
+					di->events.vbus_collapsed = true;
+				else
+					di->events.vbus_collapsed = false;
+				break;
+			default:
+				break;
+			}
+			break;
+		case POWER_SUPPLY_PROP_CAPACITY:
+			di->batt_data.percent = ret.intval;
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * abx500_chargalg_external_power_changed() - callback for power supply changes
+ * @psy:       pointer to the structure power_supply
+ *
+ * This function is the entry point of the pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in any external power
+ * supply that this driver needs to be notified of.
+ */
+static void abx500_chargalg_external_power_changed(struct power_supply *psy)
+{
+	struct abx500_chargalg *di = to_abx500_chargalg_device_info(psy);
+
+	/*
+	 * Trigger execution of the algorithm instantly and read
+	 * all power_supply properties there instead
+	 */
+	queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * abx500_chargalg_algorithm() - Main function for the algorithm
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * This is the main control function for the charging algorithm.
+ * It is called periodically or when something happens that will
+ * trigger a state change
+ */
+static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
+{
+	int charger_status;
+
+	/* Collect data from all power_supply class devices */
+	class_for_each_device(power_supply_class, NULL,
+		&di->chargalg_psy, abx500_chargalg_get_ext_psy_data);
+
+	abx500_chargalg_end_of_charge(di);
+	abx500_chargalg_check_temp(di);
+	abx500_chargalg_check_charger_voltage(di);
+
+	charger_status = abx500_chargalg_check_charger_connection(di);
+	/*
+	 * First check if we have a charger connected.
+	 * Also we don't allow charging of unknown batteries if configured
+	 * this way
+	 */
+	if (!charger_status ||
+		(di->events.batt_unknown && !di->bat->chg_unknown_bat)) {
+		if (di->charge_state != STATE_HANDHELD) {
+			di->events.safety_timer_expired = false;
+			abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
+		}
+	}
+
+	/* If suspended, we should not continue checking the flags */
+	else if (di->charge_state == STATE_SUSPENDED_INIT ||
+		di->charge_state == STATE_SUSPENDED) {
+		/* We don't do anything here, just don,t continue */
+	}
+
+	/* Safety timer expiration */
+	else if (di->events.safety_timer_expired) {
+		if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED)
+			abx500_chargalg_state_to(di,
+				STATE_SAFETY_TIMER_EXPIRED_INIT);
+	}
+	/*
+	 * Check if any interrupts has occured
+	 * that will prevent us from charging
+	 */
+
+	/* Battery removed */
+	else if (di->events.batt_rem) {
+		if (di->charge_state != STATE_BATT_REMOVED)
+			abx500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT);
+	}
+	/* Main or USB charger not ok. */
+	else if (di->events.mainextchnotok || di->events.usbchargernotok) {
+		/*
+		 * If vbus_collapsed is set, we have to lower the charger
+		 * current, which is done in the normal state below
+		 */
+		if (di->charge_state != STATE_CHG_NOT_OK &&
+				!di->events.vbus_collapsed)
+			abx500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT);
+	}
+	/* VBUS, Main or VBAT OVV. */
+	else if (di->events.vbus_ovv ||
+			di->events.main_ovv ||
+			di->events.batt_ovv ||
+			!di->chg_info.usb_chg_ok ||
+			!di->chg_info.ac_chg_ok) {
+		if (di->charge_state != STATE_OVV_PROTECT)
+			abx500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT);
+	}
+	/* USB Thermal, stop charging */
+	else if (di->events.main_thermal_prot ||
+		di->events.usb_thermal_prot) {
+		if (di->charge_state != STATE_HW_TEMP_PROTECT)
+			abx500_chargalg_state_to(di,
+				STATE_HW_TEMP_PROTECT_INIT);
+	}
+	/* Battery temp over/under */
+	else if (di->events.btemp_underover) {
+		if (di->charge_state != STATE_TEMP_UNDEROVER)
+			abx500_chargalg_state_to(di,
+				STATE_TEMP_UNDEROVER_INIT);
+	}
+	/* Watchdog expired */
+	else if (di->events.ac_wd_expired ||
+		di->events.usb_wd_expired) {
+		if (di->charge_state != STATE_WD_EXPIRED)
+			abx500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT);
+	}
+	/* Battery temp high/low */
+	else if (di->events.btemp_lowhigh) {
+		if (di->charge_state != STATE_TEMP_LOWHIGH)
+			abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT);
+	}
+
+	dev_dbg(di->dev,
+		"[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d "
+		"State %s Active_chg %d Chg_status %d AC %d USB %d "
+		"AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d "
+		"USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n",
+		di->batt_data.volt,
+		di->batt_data.avg_curr,
+		di->batt_data.inst_curr,
+		di->batt_data.temp,
+		di->batt_data.percent,
+		di->maintenance_chg,
+		states[di->charge_state],
+		di->chg_info.charger_type,
+		di->charge_status,
+		di->chg_info.conn_chg & AC_CHG,
+		di->chg_info.conn_chg & USB_CHG,
+		di->chg_info.online_chg & AC_CHG,
+		di->chg_info.online_chg & USB_CHG,
+		di->events.ac_cv_active,
+		di->events.usb_cv_active,
+		di->chg_info.ac_curr,
+		di->chg_info.usb_curr,
+		di->chg_info.ac_vset,
+		di->chg_info.ac_iset,
+		di->chg_info.usb_vset,
+		di->chg_info.usb_iset);
+
+	switch (di->charge_state) {
+	case STATE_HANDHELD_INIT:
+		abx500_chargalg_stop_charging(di);
+		di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+		abx500_chargalg_state_to(di, STATE_HANDHELD);
+		/* Intentional fallthrough */
+
+	case STATE_HANDHELD:
+		break;
+
+	case STATE_SUSPENDED_INIT:
+		if (di->susp_status.ac_suspended)
+			abx500_chargalg_ac_en(di, false, 0, 0);
+		if (di->susp_status.usb_suspended)
+			abx500_chargalg_usb_en(di, false, 0, 0);
+		abx500_chargalg_stop_safety_timer(di);
+		abx500_chargalg_stop_maintenance_timer(di);
+		di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		di->maintenance_chg = false;
+		abx500_chargalg_state_to(di, STATE_SUSPENDED);
+		power_supply_changed(&di->chargalg_psy);
+		/* Intentional fallthrough */
+
+	case STATE_SUSPENDED:
+		/* CHARGING is suspended */
+		break;
+
+	case STATE_BATT_REMOVED_INIT:
+		abx500_chargalg_stop_charging(di);
+		abx500_chargalg_state_to(di, STATE_BATT_REMOVED);
+		/* Intentional fallthrough */
+
+	case STATE_BATT_REMOVED:
+		if (!di->events.batt_rem)
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_HW_TEMP_PROTECT_INIT:
+		abx500_chargalg_stop_charging(di);
+		abx500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT);
+		/* Intentional fallthrough */
+
+	case STATE_HW_TEMP_PROTECT:
+		if (!di->events.main_thermal_prot &&
+				!di->events.usb_thermal_prot)
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_OVV_PROTECT_INIT:
+		abx500_chargalg_stop_charging(di);
+		abx500_chargalg_state_to(di, STATE_OVV_PROTECT);
+		/* Intentional fallthrough */
+
+	case STATE_OVV_PROTECT:
+		if (!di->events.vbus_ovv &&
+				!di->events.main_ovv &&
+				!di->events.batt_ovv &&
+				di->chg_info.usb_chg_ok &&
+				di->chg_info.ac_chg_ok)
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_CHG_NOT_OK_INIT:
+		abx500_chargalg_stop_charging(di);
+		abx500_chargalg_state_to(di, STATE_CHG_NOT_OK);
+		/* Intentional fallthrough */
+
+	case STATE_CHG_NOT_OK:
+		if (!di->events.mainextchnotok &&
+				!di->events.usbchargernotok)
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_SAFETY_TIMER_EXPIRED_INIT:
+		abx500_chargalg_stop_charging(di);
+		abx500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED);
+		/* Intentional fallthrough */
+
+	case STATE_SAFETY_TIMER_EXPIRED:
+		/* We exit this state when charger is removed */
+		break;
+
+	case STATE_NORMAL_INIT:
+		abx500_chargalg_start_charging(di,
+			di->bat->bat_type[di->bat->batt_id].normal_vol_lvl,
+			di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
+		abx500_chargalg_state_to(di, STATE_NORMAL);
+		abx500_chargalg_start_safety_timer(di);
+		abx500_chargalg_stop_maintenance_timer(di);
+		init_maxim_chg_curr(di);
+		di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+		di->eoc_cnt = 0;
+		di->maintenance_chg = false;
+		power_supply_changed(&di->chargalg_psy);
+
+		break;
+
+	case STATE_NORMAL:
+		handle_maxim_chg_curr(di);
+		if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
+			di->maintenance_chg) {
+			if (di->bat->no_maintenance)
+				abx500_chargalg_state_to(di,
+					STATE_WAIT_FOR_RECHARGE_INIT);
+			else
+				abx500_chargalg_state_to(di,
+					STATE_MAINTENANCE_A_INIT);
+		}
+		break;
+
+	/* This state will be used when the maintenance state is disabled */
+	case STATE_WAIT_FOR_RECHARGE_INIT:
+		abx500_chargalg_hold_charging(di);
+		abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE);
+		di->rch_cnt = RCH_COND_CNT;
+		/* Intentional fallthrough */
+
+	case STATE_WAIT_FOR_RECHARGE:
+		if (di->batt_data.volt <=
+			di->bat->bat_type[di->bat->batt_id].recharge_vol) {
+			if (di->rch_cnt-- == 0)
+				abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		} else
+			di->rch_cnt = RCH_COND_CNT;
+		break;
+
+	case STATE_MAINTENANCE_A_INIT:
+		abx500_chargalg_stop_safety_timer(di);
+		abx500_chargalg_start_maintenance_timer(di,
+			di->bat->bat_type[
+				di->bat->batt_id].maint_a_chg_timer_h);
+		abx500_chargalg_start_charging(di,
+			di->bat->bat_type[
+				di->bat->batt_id].maint_a_vol_lvl,
+			di->bat->bat_type[
+				di->bat->batt_id].maint_a_cur_lvl);
+		abx500_chargalg_state_to(di, STATE_MAINTENANCE_A);
+		power_supply_changed(&di->chargalg_psy);
+		/* Intentional fallthrough*/
+
+	case STATE_MAINTENANCE_A:
+		if (di->events.maintenance_timer_expired) {
+			abx500_chargalg_stop_maintenance_timer(di);
+			abx500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT);
+		}
+		break;
+
+	case STATE_MAINTENANCE_B_INIT:
+		abx500_chargalg_start_maintenance_timer(di,
+			di->bat->bat_type[
+				di->bat->batt_id].maint_b_chg_timer_h);
+		abx500_chargalg_start_charging(di,
+			di->bat->bat_type[
+				di->bat->batt_id].maint_b_vol_lvl,
+			di->bat->bat_type[
+				di->bat->batt_id].maint_b_cur_lvl);
+		abx500_chargalg_state_to(di, STATE_MAINTENANCE_B);
+		power_supply_changed(&di->chargalg_psy);
+		/* Intentional fallthrough*/
+
+	case STATE_MAINTENANCE_B:
+		if (di->events.maintenance_timer_expired) {
+			abx500_chargalg_stop_maintenance_timer(di);
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		}
+		break;
+
+	case STATE_TEMP_LOWHIGH_INIT:
+		abx500_chargalg_start_charging(di,
+			di->bat->bat_type[
+				di->bat->batt_id].low_high_vol_lvl,
+			di->bat->bat_type[
+				di->bat->batt_id].low_high_cur_lvl);
+		abx500_chargalg_stop_maintenance_timer(di);
+		di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+		abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
+		power_supply_changed(&di->chargalg_psy);
+		/* Intentional fallthrough */
+
+	case STATE_TEMP_LOWHIGH:
+		if (!di->events.btemp_lowhigh)
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_WD_EXPIRED_INIT:
+		abx500_chargalg_stop_charging(di);
+		abx500_chargalg_state_to(di, STATE_WD_EXPIRED);
+		/* Intentional fallthrough */
+
+	case STATE_WD_EXPIRED:
+		if (!di->events.ac_wd_expired &&
+				!di->events.usb_wd_expired)
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_TEMP_UNDEROVER_INIT:
+		abx500_chargalg_stop_charging(di);
+		abx500_chargalg_state_to(di, STATE_TEMP_UNDEROVER);
+		/* Intentional fallthrough */
+
+	case STATE_TEMP_UNDEROVER:
+		if (!di->events.btemp_underover)
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+	}
+
+	/* Start charging directly if the new state is a charge state */
+	if (di->charge_state == STATE_NORMAL_INIT ||
+			di->charge_state == STATE_MAINTENANCE_A_INIT ||
+			di->charge_state == STATE_MAINTENANCE_B_INIT)
+		queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * abx500_chargalg_periodic_work() - Periodic work for the algorithm
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for the charging algorithm
+ */
+static void abx500_chargalg_periodic_work(struct work_struct *work)
+{
+	struct abx500_chargalg *di = container_of(work,
+		struct abx500_chargalg, chargalg_periodic_work.work);
+
+	abx500_chargalg_algorithm(di);
+
+	/*
+	 * If a charger is connected then the battery has to be monitored
+	 * frequently, else the work can be delayed.
+	 */
+	if (di->chg_info.conn_chg)
+		queue_delayed_work(di->chargalg_wq,
+			&di->chargalg_periodic_work,
+			di->bat->interval_charging * HZ);
+	else
+		queue_delayed_work(di->chargalg_wq,
+			&di->chargalg_periodic_work,
+			di->bat->interval_not_charging * HZ);
+}
+
+/**
+ * abx500_chargalg_wd_work() - periodic work to kick the charger watchdog
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for kicking the charger watchdog
+ */
+static void abx500_chargalg_wd_work(struct work_struct *work)
+{
+	int ret;
+	struct abx500_chargalg *di = container_of(work,
+		struct abx500_chargalg, chargalg_wd_work.work);
+
+	dev_dbg(di->dev, "abx500_chargalg_wd_work\n");
+
+	ret = abx500_chargalg_kick_watchdog(di);
+	if (ret < 0)
+		dev_err(di->dev, "failed to kick watchdog\n");
+
+	queue_delayed_work(di->chargalg_wq,
+		&di->chargalg_wd_work, CHG_WD_INTERVAL);
+}
+
+/**
+ * abx500_chargalg_work() - Work to run the charging algorithm instantly
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for calling the charging algorithm
+ */
+static void abx500_chargalg_work(struct work_struct *work)
+{
+	struct abx500_chargalg *di = container_of(work,
+		struct abx500_chargalg, chargalg_work);
+
+	abx500_chargalg_algorithm(di);
+}
+
+/**
+ * abx500_chargalg_get_property() - get the chargalg properties
+ * @psy:	pointer to the power_supply structure
+ * @psp:	pointer to the power_supply_property structure
+ * @val:	pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the
+ * chargalg properties by reading the sysfs files.
+ * status:     charging/discharging/full/unknown
+ * health:     health of the battery
+ * Returns error code in case of failure else 0 on success
+ */
+static int abx500_chargalg_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct abx500_chargalg *di;
+
+	di = to_abx500_chargalg_device_info(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = di->charge_status;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (di->events.batt_ovv) {
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		} else if (di->events.btemp_underover) {
+			if (di->batt_data.temp <= di->bat->temp_under)
+				val->intval = POWER_SUPPLY_HEALTH_COLD;
+			else
+				val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		} else {
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Exposure to the sysfs interface */
+
+/**
+ * abx500_chargalg_sysfs_charger() - sysfs store operations
+ * @kobj:      pointer to the struct kobject
+ * @attr:      pointer to the struct attribute
+ * @buf:       buffer that holds the parameter passed from userspace
+ * @length:    length of the parameter passed
+ *
+ * Returns length of the buffer(input taken from user space) on success
+ * else error code on failure
+ * The operation to be performed on passing the parameters from the user space.
+ */
+static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
+	struct attribute *attr, const char *buf, size_t length)
+{
+	struct abx500_chargalg *di = container_of(kobj,
+		struct abx500_chargalg, chargalg_kobject);
+	long int param;
+	int ac_usb;
+	int ret;
+	char entry = *attr->name;
+
+	switch (entry) {
+	case 'c':
+		ret = strict_strtol(buf, 10, &param);
+		if (ret < 0)
+			return ret;
+
+		ac_usb = param;
+		switch (ac_usb) {
+		case 0:
+			/* Disable charging */
+			di->susp_status.ac_suspended = true;
+			di->susp_status.usb_suspended = true;
+			di->susp_status.suspended_change = true;
+			/* Trigger a state change */
+			queue_work(di->chargalg_wq,
+				&di->chargalg_work);
+			break;
+		case 1:
+			/* Enable AC Charging */
+			di->susp_status.ac_suspended = false;
+			di->susp_status.suspended_change = true;
+			/* Trigger a state change */
+			queue_work(di->chargalg_wq,
+				&di->chargalg_work);
+			break;
+		case 2:
+			/* Enable USB charging */
+			di->susp_status.usb_suspended = false;
+			di->susp_status.suspended_change = true;
+			/* Trigger a state change */
+			queue_work(di->chargalg_wq,
+				&di->chargalg_work);
+			break;
+		default:
+			dev_info(di->dev, "Wrong input\n"
+				"Enter 0. Disable AC/USB Charging\n"
+				"1. Enable AC charging\n"
+				"2. Enable USB Charging\n");
+		};
+		break;
+	};
+	return strlen(buf);
+}
+
+static struct attribute abx500_chargalg_en_charger = \
+{
+	.name = "chargalg",
+	.mode = S_IWUGO,
+};
+
+static struct attribute *abx500_chargalg_chg[] = {
+	&abx500_chargalg_en_charger,
+	NULL
+};
+
+const struct sysfs_ops abx500_chargalg_sysfs_ops = {
+	.store = abx500_chargalg_sysfs_charger,
+};
+
+static struct kobj_type abx500_chargalg_ktype = {
+	.sysfs_ops = &abx500_chargalg_sysfs_ops,
+	.default_attrs = abx500_chargalg_chg,
+};
+
+/**
+ * abx500_chargalg_sysfs_exit() - de-init of sysfs entry
+ * @di:                pointer to the struct abx500_chargalg
+ *
+ * This function removes the entry in sysfs.
+ */
+static void abx500_chargalg_sysfs_exit(struct abx500_chargalg *di)
+{
+	kobject_del(&di->chargalg_kobject);
+}
+
+/**
+ * abx500_chargalg_sysfs_init() - init of sysfs entry
+ * @di:                pointer to the struct abx500_chargalg
+ *
+ * This function adds an entry in sysfs.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int abx500_chargalg_sysfs_init(struct abx500_chargalg *di)
+{
+	int ret = 0;
+
+	ret = kobject_init_and_add(&di->chargalg_kobject,
+		&abx500_chargalg_ktype,
+		NULL, "abx500_chargalg");
+	if (ret < 0)
+		dev_err(di->dev, "failed to create sysfs entry\n");
+
+	return ret;
+}
+/* Exposure to the sysfs interface <<END>> */
+
+#if defined(CONFIG_PM)
+static int abx500_chargalg_resume(struct platform_device *pdev)
+{
+	struct abx500_chargalg *di = platform_get_drvdata(pdev);
+
+	/* Kick charger watchdog if charging (any charger online) */
+	if (di->chg_info.online_chg)
+		queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
+
+	/*
+	 * Run the charging algorithm directly to be sure we don't
+	 * do it too seldom
+	 */
+	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+	return 0;
+}
+
+static int abx500_chargalg_suspend(struct platform_device *pdev,
+	pm_message_t state)
+{
+	struct abx500_chargalg *di = platform_get_drvdata(pdev);
+
+	if (di->chg_info.online_chg)
+		cancel_delayed_work_sync(&di->chargalg_wd_work);
+
+	cancel_delayed_work_sync(&di->chargalg_periodic_work);
+
+	return 0;
+}
+#else
+#define abx500_chargalg_suspend      NULL
+#define abx500_chargalg_resume       NULL
+#endif
+
+static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
+{
+	struct abx500_chargalg *di = platform_get_drvdata(pdev);
+
+	/* sysfs interface to enable/disbale charging from user space */
+	abx500_chargalg_sysfs_exit(di);
+
+	/* Delete the work queue */
+	destroy_workqueue(di->chargalg_wq);
+
+	flush_scheduled_work();
+	power_supply_unregister(&di->chargalg_psy);
+	platform_set_drvdata(pdev, NULL);
+	kfree(di);
+
+	return 0;
+}
+
+static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
+{
+	struct abx500_bm_plat_data *plat_data;
+	int ret = 0;
+
+	struct abx500_chargalg *di =
+		kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	/* get device struct */
+	di->dev = &pdev->dev;
+
+	plat_data = pdev->dev.platform_data;
+	di->pdata = plat_data->chargalg;
+	di->bat = plat_data->battery;
+
+	/* chargalg supply */
+	di->chargalg_psy.name = "abx500_chargalg";
+	di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY;
+	di->chargalg_psy.properties = abx500_chargalg_props;
+	di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props);
+	di->chargalg_psy.get_property = abx500_chargalg_get_property;
+	di->chargalg_psy.supplied_to = di->pdata->supplied_to;
+	di->chargalg_psy.num_supplicants = di->pdata->num_supplicants;
+	di->chargalg_psy.external_power_changed =
+		abx500_chargalg_external_power_changed;
+
+	/* Initilialize safety timer */
+	init_timer(&di->safety_timer);
+	di->safety_timer.function = abx500_chargalg_safety_timer_expired;
+	di->safety_timer.data = (unsigned long) di;
+
+	/* Initilialize maintenance timer */
+	init_timer(&di->maintenance_timer);
+	di->maintenance_timer.function =
+		abx500_chargalg_maintenance_timer_expired;
+	di->maintenance_timer.data = (unsigned long) di;
+
+	/* Create a work queue for the chargalg */
+	di->chargalg_wq =
+		create_singlethread_workqueue("abx500_chargalg_wq");
+	if (di->chargalg_wq == NULL) {
+		dev_err(di->dev, "failed to create work queue\n");
+		goto free_device_info;
+	}
+
+	/* Init work for chargalg */
+	INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_periodic_work,
+		abx500_chargalg_periodic_work);
+	INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_wd_work,
+		abx500_chargalg_wd_work);
+
+	/* Init work for chargalg */
+	INIT_WORK(&di->chargalg_work, abx500_chargalg_work);
+
+	/* To detect charger at startup */
+	di->chg_info.prev_conn_chg = -1;
+
+	/* Register chargalg power supply class */
+	ret = power_supply_register(di->dev, &di->chargalg_psy);
+	if (ret) {
+		dev_err(di->dev, "failed to register chargalg psy\n");
+		goto free_chargalg_wq;
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	/* sysfs interface to enable/disable charging from user space */
+	ret = abx500_chargalg_sysfs_init(di);
+	if (ret) {
+		dev_err(di->dev, "failed to create sysfs entry\n");
+		goto free_psy;
+	}
+
+	/* Run the charging algorithm */
+	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+	dev_info(di->dev, "probe success\n");
+	return ret;
+
+free_psy:
+	power_supply_unregister(&di->chargalg_psy);
+free_chargalg_wq:
+	destroy_workqueue(di->chargalg_wq);
+free_device_info:
+	kfree(di);
+
+	return ret;
+}
+
+static struct platform_driver abx500_chargalg_driver = {
+	.probe = abx500_chargalg_probe,
+	.remove = __devexit_p(abx500_chargalg_remove),
+	.suspend = abx500_chargalg_suspend,
+	.resume = abx500_chargalg_resume,
+	.driver = {
+		.name = "abx500-chargalg",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init abx500_chargalg_init(void)
+{
+	return platform_driver_register(&abx500_chargalg_driver);
+}
+
+static void __exit abx500_chargalg_exit(void)
+{
+	platform_driver_unregister(&abx500_chargalg_driver);
+}
+
+module_init(abx500_chargalg_init);
+module_exit(abx500_chargalg_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
+MODULE_ALIAS("platform:abx500-chargalg");
+MODULE_DESCRIPTION("abx500 battery charging algorithm");

include/linux/mfd/abx500.h

@@ -152,6 +152,279 @@ struct abx500_init_settings {
 	u8 setting;
 };
 
+/* Battery driver related data */
+/*
+ * ADC for the battery thermistor.
+ * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined
+ * with a NTC resistor to both identify the battery and to measure its
+ * temperature. Different phone manufactures uses different techniques to both
+ * identify the battery and to read its temperature.
+ */
+enum abx500_adc_therm {
+	ABx500_ADC_THERM_BATCTRL,
+	ABx500_ADC_THERM_BATTEMP,
+};
+
+/**
+ * struct abx500_res_to_temp - defines one point in a temp to res curve. To
+ * be used in battery packs that combines the identification resistor with a
+ * NTC resistor.
+ * @temp:			battery pack temperature in Celcius
+ * @resist:			NTC resistor net total resistance
+ */
+struct abx500_res_to_temp {
+	int temp;
+	int resist;
+};
+
+/**
+ * struct abx500_v_to_cap - Table for translating voltage to capacity
+ * @voltage:		Voltage in mV
+ * @capacity:		Capacity in percent
+ */
+struct abx500_v_to_cap {
+	int voltage;
+	int capacity;
+};
+
+/* Forward declaration */
+struct abx500_fg;
+
+/**
+ * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds
+ * if not specified
+ * @recovery_sleep_timer:	Time between measurements while recovering
+ * @recovery_total_time:	Total recovery time
+ * @init_timer:			Measurement interval during startup
+ * @init_discard_time:		Time we discard voltage measurement at startup
+ * @init_total_time:		Total init time during startup
+ * @high_curr_time:		Time current has to be high to go to recovery
+ * @accu_charging:		FG accumulation time while charging
+ * @accu_high_curr:		FG accumulation time in high current mode
+ * @high_curr_threshold:	High current threshold, in mA
+ * @lowbat_threshold:		Low battery threshold, in mV
+ * @overbat_threshold:		Over battery threshold, in mV
+ * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
+ *				Resolution in 50 mV step.
+ * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
+ *				Resolution in 50 mV step.
+ * @user_cap_limit		Capacity reported from user must be within this
+ *				limit to be considered as sane, in percentage
+ *				points.
+ * @maint_thres			This is the threshold where we stop reporting
+ *				battery full while in maintenance, in per cent
+ */
+struct abx500_fg_parameters {
+	int recovery_sleep_timer;
+	int recovery_total_time;
+	int init_timer;
+	int init_discard_time;
+	int init_total_time;
+	int high_curr_time;
+	int accu_charging;
+	int accu_high_curr;
+	int high_curr_threshold;
+	int lowbat_threshold;
+	int overbat_threshold;
+	int battok_falling_th_sel0;
+	int battok_raising_th_sel1;
+	int user_cap_limit;
+	int maint_thres;
+};
+
+/**
+ * struct abx500_charger_maximization - struct used by the board config.
+ * @use_maxi:		Enable maximization for this battery type
+ * @maxi_chg_curr:	Maximum charger current allowed
+ * @maxi_wait_cycles:	cycles to wait before setting charger current
+ * @charger_curr_step	delta between two charger current settings (mA)
+ */
+struct abx500_maxim_parameters {
+	bool ena_maxi;
+	int chg_curr;
+	int wait_cycles;
+	int charger_curr_step;
+};
+
+/**
+ * struct abx500_battery_type - different batteries supported
+ * @name:			battery technology
+ * @resis_high:			battery upper resistance limit
+ * @resis_low:			battery lower resistance limit
+ * @charge_full_design:		Maximum battery capacity in mAh
+ * @nominal_voltage:		Nominal voltage of the battery in mV
+ * @termination_vol:		max voltage upto which battery can be charged
+ * @termination_curr		battery charging termination current in mA
+ * @recharge_vol		battery voltage limit that will trigger a new
+ *				full charging cycle in the case where maintenan-
+ *				-ce charging has been disabled
+ * @normal_cur_lvl:		charger current in normal state in mA
+ * @normal_vol_lvl:		charger voltage in normal state in mV
+ * @maint_a_cur_lvl:		charger current in maintenance A state in mA
+ * @maint_a_vol_lvl:		charger voltage in maintenance A state in mV
+ * @maint_a_chg_timer_h:	charge time in maintenance A state
+ * @maint_b_cur_lvl:		charger current in maintenance B state in mA
+ * @maint_b_vol_lvl:		charger voltage in maintenance B state in mV
+ * @maint_b_chg_timer_h:	charge time in maintenance B state
+ * @low_high_cur_lvl:		charger current in temp low/high state in mA
+ * @low_high_vol_lvl:		charger voltage in temp low/high state in mV'
+ * @battery_resistance:		battery inner resistance in mOhm.
+ * @n_r_t_tbl_elements:		number of elements in r_to_t_tbl
+ * @r_to_t_tbl:			table containing resistance to temp points
+ * @n_v_cap_tbl_elements:	number of elements in v_to_cap_tbl
+ * @v_to_cap_tbl:		Voltage to capacity (in %) table
+ * @n_batres_tbl_elements	number of elements in the batres_tbl
+ * @batres_tbl			battery internal resistance vs temperature table
+ */
+struct abx500_battery_type {
+	int name;
+	int resis_high;
+	int resis_low;
+	int charge_full_design;
+	int nominal_voltage;
+	int termination_vol;
+	int termination_curr;
+	int recharge_vol;
+	int normal_cur_lvl;
+	int normal_vol_lvl;
+	int maint_a_cur_lvl;
+	int maint_a_vol_lvl;
+	int maint_a_chg_timer_h;
+	int maint_b_cur_lvl;
+	int maint_b_vol_lvl;
+	int maint_b_chg_timer_h;
+	int low_high_cur_lvl;
+	int low_high_vol_lvl;
+	int battery_resistance;
+	int n_temp_tbl_elements;
+	struct abx500_res_to_temp *r_to_t_tbl;
+	int n_v_cap_tbl_elements;
+	struct abx500_v_to_cap *v_to_cap_tbl;
+	int n_batres_tbl_elements;
+	struct batres_vs_temp *batres_tbl;
+};
+
+/**
+ * struct abx500_bm_capacity_levels - abx500 capacity level data
+ * @critical:		critical capacity level in percent
+ * @low:		low capacity level in percent
+ * @normal:		normal capacity level in percent
+ * @high:		high capacity level in percent
+ * @full:		full capacity level in percent
+ */
+struct abx500_bm_capacity_levels {
+	int critical;
+	int low;
+	int normal;
+	int high;
+	int full;
+};
+
+/**
+ * struct abx500_bm_charger_parameters - Charger specific parameters
+ * @usb_volt_max:	maximum allowed USB charger voltage in mV
+ * @usb_curr_max:	maximum allowed USB charger current in mA
+ * @ac_volt_max:	maximum allowed AC charger voltage in mV
+ * @ac_curr_max:	maximum allowed AC charger current in mA
+ */
+struct abx500_bm_charger_parameters {
+	int usb_volt_max;
+	int usb_curr_max;
+	int ac_volt_max;
+	int ac_curr_max;
+};
+
+/**
+ * struct abx500_bm_data - abx500 battery management data
+ * @temp_under		under this temp, charging is stopped
+ * @temp_low		between this temp and temp_under charging is reduced
+ * @temp_high		between this temp and temp_over charging is reduced
+ * @temp_over		over this temp, charging is stopped
+ * @temp_now		present battery temperature
+ * @temp_interval_chg	temperature measurement interval in s when charging
+ * @temp_interval_nochg	temperature measurement interval in s when not charging
+ * @main_safety_tmr_h	safety timer for main charger
+ * @usb_safety_tmr_h	safety timer for usb charger
+ * @bkup_bat_v		voltage which we charge the backup battery with
+ * @bkup_bat_i		current which we charge the backup battery with
+ * @no_maintenance	indicates that maintenance charging is disabled
+ * @abx500_adc_therm	placement of thermistor, batctrl or battemp adc
+ * @chg_unknown_bat	flag to enable charging of unknown batteries
+ * @enable_overshoot	flag to enable VBAT overshoot control
+ * @auto_trig		flag to enable auto adc trigger
+ * @fg_res		resistance of FG resistor in 0.1mOhm
+ * @n_btypes		number of elements in array bat_type
+ * @batt_id		index of the identified battery in array bat_type
+ * @interval_charging	charge alg cycle period time when charging (sec)
+ * @interval_not_charging charge alg cycle period time when not charging (sec)
+ * @temp_hysteresis	temperature hysteresis
+ * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
+ * @maxi:		maximization parameters
+ * @cap_levels		capacity in percent for the different capacity levels
+ * @bat_type		table of supported battery types
+ * @chg_params		charger parameters
+ * @fg_params		fuel gauge parameters
+ */
+struct abx500_bm_data {
+	int temp_under;
+	int temp_low;
+	int temp_high;
+	int temp_over;
+	int temp_now;
+	int temp_interval_chg;
+	int temp_interval_nochg;
+	int main_safety_tmr_h;
+	int usb_safety_tmr_h;
+	int bkup_bat_v;
+	int bkup_bat_i;
+	bool no_maintenance;
+	bool chg_unknown_bat;
+	bool enable_overshoot;
+	bool auto_trig;
+	enum abx500_adc_therm adc_therm;
+	int fg_res;
+	int n_btypes;
+	int batt_id;
+	int interval_charging;
+	int interval_not_charging;
+	int temp_hysteresis;
+	int gnd_lift_resistance;
+	const struct abx500_maxim_parameters *maxi;
+	const struct abx500_bm_capacity_levels *cap_levels;
+	const struct abx500_battery_type *bat_type;
+	const struct abx500_bm_charger_parameters *chg_params;
+	const struct abx500_fg_parameters *fg_params;
+};
+
+struct abx500_chargalg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_charger_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+	bool autopower_cfg;
+};
+
+struct abx500_btemp_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_fg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_bm_plat_data {
+	struct abx500_bm_data *battery;
+	struct abx500_charger_platform_data *charger;
+	struct abx500_btemp_platform_data *btemp;
+	struct abx500_fg_platform_data *fg;
+	struct abx500_chargalg_platform_data *chargalg;
+};
+
 int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
 	u8 value);
 int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,

include/linux/mfd/abx500/ux500_chargalg.h

+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _UX500_CHARGALG_H
+#define _UX500_CHARGALG_H
+
+#include <linux/power_supply.h>
+
+#define psy_to_ux500_charger(x) container_of((x), \
+		struct ux500_charger, psy)
+
+/* Forward declaration */
+struct ux500_charger;
+
+struct ux500_charger_ops {
+	int (*enable) (struct ux500_charger *, int, int, int);
+	int (*kick_wd) (struct ux500_charger *);
+	int (*update_curr) (struct ux500_charger *, int);
+};
+
+/**
+ * struct ux500_charger - power supply ux500 charger sub class
+ * @psy			power supply base class
+ * @ops			ux500 charger operations
+ * @max_out_volt	maximum output charger voltage in mV
+ * @max_out_curr	maximum output charger current in mA
+ */
+struct ux500_charger {
+	struct power_supply psy;
+	struct ux500_charger_ops ops;
+	int max_out_volt;
+	int max_out_curr;
+};
+
+#endif