Commit 174a86df authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (dme1737) Minor cleanups
  hwmon: (dme1737) Add support for in7 for SCH5127
  hwmon: (emc1403) Add EMC1423 support
  hwmon: (w83627hf) Document W83627THF voltage pin mapping
  hwmon: (w83793) Drop useless mutex
  hwmon: (fschmd) Drop useless mutex
  hwmon: (w83781d) Use pr_fmt and pr_<level>
  hwmon: (pc87427) Use pr_fmt and pr_<level>
  hwmon: (pc87360) Use pr_fmt and pr_<level>
  hwmon: (lm78) Use pr_fmt and pr_<level>
  hwmon: (it87) Use pr_fmt and pr_<level>
  hwmon: Schedule the removal of the old intrusion detection interfaces
  hwmon: (w83793) Implement the standard intrusion detection interface
  hwmon: (w83792d) Implement the standard intrusion detection interface
  hwmon: (adm9240) Implement the standard intrusion detection interface
  hwmon: (via686a) Initialize fan_div values
  hwmon: (w83795) Silent false warning from gcc
  hwmon: (ads7828) Update email contact details
parents 1896a134 06f3d9fb
......@@ -590,3 +590,13 @@ Why: The functions have been superceded by cancel_delayed_work_sync()
Who: Tejun Heo <tj@kernel.org>
----------------------------
What: Legacy, non-standard chassis intrusion detection interface.
When: June 2011
Why: The adm9240, w83792d and w83793 hardware monitoring drivers have
legacy interfaces for chassis intrusion detection. A standard
interface has been added to each driver, so the legacy interface
can be removed.
Who: Jean Delvare <khali@linux-fr.org>
----------------------------
......@@ -155,7 +155,7 @@ connected to a normally open switch.
The ADM9240 provides an internal open drain on this line, and may output
a 20 ms active low pulse to reset an external Chassis Intrusion latch.
Clear the CI latch by writing value 1 to the sysfs chassis_clear file.
Clear the CI latch by writing value 0 to the sysfs intrusion0_alarm file.
Alarm flags reported as 16-bit word
......
......@@ -9,7 +9,7 @@ Supported chips:
http://focus.ti.com/lit/ds/symlink/ads7828.pdf
Authors:
Steve Hardy <steve@linuxrealtime.co.uk>
Steve Hardy <shardy@redhat.com>
Module Parameters
-----------------
......
......@@ -42,7 +42,7 @@ Description
This driver implements support for the hardware monitoring capabilities of the
SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
automatically.
......@@ -105,6 +105,7 @@ SCH5127:
in4: V1_IN 0V - 1.5V
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
in7: Vtrip (+1.5V) 0V - 1.99V
Each voltage input has associated min and max limits which trigger an alarm
when crossed.
......@@ -217,10 +218,10 @@ cpu0_vid RO CPU core reference voltage in
vrm RW Voltage regulator module version
number.
in[0-6]_input RO Measured voltage in millivolts.
in[0-6]_min RW Low limit for voltage input.
in[0-6]_max RW High limit for voltage input.
in[0-6]_alarm RO Voltage input alarm. Returns 1 if
in[0-7]_input RO Measured voltage in millivolts.
in[0-7]_min RW Low limit for voltage input.
in[0-7]_max RW High limit for voltage input.
in[0-7]_alarm RO Voltage input alarm. Returns 1 if
voltage input is or went outside the
associated min-max range, 0 otherwise.
......@@ -324,3 +325,4 @@ fan5 opt opt
pwm5 opt opt
fan6 opt opt
pwm6 opt opt
in7 yes
......@@ -91,3 +91,25 @@ isaset -y -f 0x2e 0xaa
The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but
0x4e/0x4f is also possible.
Voltage pin mapping
-------------------
Here is a summary of the voltage pin mapping for the W83627THF. This
can be useful to convert data provided by board manufacturers into
working libsensors configuration statements.
W83627THF |
Pin | Name | Register | Sysfs attribute
-----------------------------------------------------
100 | CPUVCORE | 20h | in0
99 | VIN0 | 21h | in1
98 | VIN1 | 22h | in2
97 | VIN2 | 24h | in4
114 | AVCC | 23h | in3
61 | 5VSB | 50h (bank 5) | in7
74 | VBAT | 51h (bank 5) | in8
For other supported devices, you'll have to take the hard path and
look up the information in the datasheet yourself (and then add it
to this document please.)
......@@ -92,7 +92,7 @@ This driver implements support for Winbond W83793G/W83793R chips.
* Chassis
If the case open alarm triggers, it will stay in this state unless cleared
by any write to the sysfs file "chassis".
by writing 0 to the sysfs file "intrusion0_alarm".
* VID and VRM
The VRM version is detected automatically, don't modify the it unless you
......
......@@ -809,10 +809,10 @@ config SENSORS_DME1737
will be called dme1737.
config SENSORS_EMC1403
tristate "SMSC EMC1403 thermal sensor"
tristate "SMSC EMC1403/23 thermal sensor"
depends on I2C
help
If you say yes here you get support for the SMSC EMC1403
If you say yes here you get support for the SMSC EMC1403/23
temperature monitoring chip.
Threshold values can be configured using sysfs.
......
......@@ -20,7 +20,7 @@
* Alarms 16-bit map of active alarms
* Analog Out 0..1250 mV output
*
* Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear'
* Chassis Intrusion: clear CI latch with 'echo 0 > intrusion0_alarm'
*
* Test hardware: Intel SE440BX-2 desktop motherboard --Grant
*
......@@ -476,13 +476,16 @@ static ssize_t set_aout(struct device *dev,
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
/* chassis_clear */
static ssize_t chassis_clear(struct device *dev,
static ssize_t chassis_clear_legacy(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned long val = simple_strtol(buf, NULL, 10);
dev_warn(dev, "Attribute chassis_clear is deprecated, "
"use intrusion0_alarm instead\n");
if (val == 1) {
i2c_smbus_write_byte_data(client,
ADM9240_REG_CHASSIS_CLEAR, 0x80);
......@@ -490,7 +493,29 @@ static ssize_t chassis_clear(struct device *dev,
}
return count;
}
static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear);
static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear_legacy);
static ssize_t chassis_clear(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val;
if (strict_strtoul(buf, 10, &val) || val != 0)
return -EINVAL;
mutex_lock(&data->update_lock);
i2c_smbus_write_byte_data(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
data->valid = 0; /* Force cache refresh */
mutex_unlock(&data->update_lock);
dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
return count;
}
static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR, show_alarm,
chassis_clear, 12);
static struct attribute *adm9240_attributes[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
......@@ -532,6 +557,7 @@ static struct attribute *adm9240_attributes[] = {
&dev_attr_alarms.attr,
&dev_attr_aout_output.attr,
&dev_attr_chassis_clear.attr,
&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
&dev_attr_cpu0_vid.attr,
NULL
};
......
......@@ -4,7 +4,7 @@
This driver is based on the lm75 and other lm_sensors/hwmon drivers
Written by Steve Hardy <steve@linuxrealtime.co.uk>
Written by Steve Hardy <shardy@redhat.com>
Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf
......@@ -271,7 +271,7 @@ static void __exit sensors_ads7828_exit(void)
i2c_del_driver(&ads7828_driver);
}
MODULE_AUTHOR("Steve Hardy <steve@linuxrealtime.co.uk>");
MODULE_AUTHOR("Steve Hardy <shardy@redhat.com>");
MODULE_DESCRIPTION("ADS7828 driver");
MODULE_LICENSE("GPL");
......
This diff is collapsed.
......@@ -269,23 +269,30 @@ static int emc1403_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
int id;
/* Check if thermal chip is SMSC and EMC1403 */
/* Check if thermal chip is SMSC and EMC1403 or EMC1423 */
id = i2c_smbus_read_byte_data(client, THERMAL_SMSC_ID_REG);
if (id != 0x5d)
return -ENODEV;
id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
switch (id) {
case 0x21:
strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
break;
case 0x23:
strlcpy(info->type, "emc1423", I2C_NAME_SIZE);
break;
/* Note: 0x25 is the 1404 which is very similar and this
driver could be extended */
id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
if (id != 0x21)
default:
return -ENODEV;
}
id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG);
if (id != 0x01)
return -ENODEV;
strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
return 0;
}
......@@ -342,6 +349,7 @@ static const unsigned short emc1403_address_list[] = {
static const struct i2c_device_id emc1403_idtable[] = {
{ "emc1403", 0 },
{ "emc1423", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
......
......@@ -49,7 +49,6 @@
#include <linux/kref.h>
/* Addresses to scan */
static DEFINE_MUTEX(watchdog_mutex);
static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
/* Insmod parameters */
......@@ -850,7 +849,7 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf,
static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
static struct watchdog_info ident = {
struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
WDIOF_CARDRESET,
.identity = "FSC watchdog"
......@@ -858,7 +857,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
int i, ret = 0;
struct fschmd_data *data = filp->private_data;
mutex_lock(&watchdog_mutex);
switch (cmd) {
case WDIOC_GETSUPPORT:
ident.firmware_version = data->revision;
......@@ -915,7 +913,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
default:
ret = -ENOTTY;
}
mutex_unlock(&watchdog_mutex);
return ret;
}
......
......@@ -38,6 +38,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
......@@ -1570,26 +1572,25 @@ static int __init it87_find(unsigned short *address,
case 0xffff: /* No device at all */
goto exit;
default:
pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
chip_type);
pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
goto exit;
}
superio_select(PME);
if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
pr_info("it87: Device not activated, skipping\n");
pr_info("Device not activated, skipping\n");
goto exit;
}
*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
if (*address == 0) {
pr_info("it87: Base address not set, skipping\n");
pr_info("Base address not set, skipping\n");
goto exit;
}
err = 0;
sio_data->revision = superio_inb(DEVREV) & 0x0f;
pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
pr_info("Found IT%04xF chip at 0x%x, revision %d\n",
chip_type, *address, sio_data->revision);
/* in8 (Vbat) is always internal */
......@@ -1615,7 +1616,7 @@ static int __init it87_find(unsigned short *address,
} else {
/* We need at least 4 VID pins */
if (reg & 0x0f) {
pr_info("it87: VID is disabled (pins used for GPIO)\n");
pr_info("VID is disabled (pins used for GPIO)\n");
sio_data->skip_vid = 1;
}
}
......@@ -1651,7 +1652,7 @@ static int __init it87_find(unsigned short *address,
if (sio_data->type == it8720 && !(reg & (1 << 1))) {
reg |= (1 << 1);
superio_outb(IT87_SIO_PINX2_REG, reg);
pr_notice("it87: Routing internal VCCH to in7\n");
pr_notice("Routing internal VCCH to in7\n");
}
if (reg & (1 << 0))
sio_data->internal |= (1 << 0);
......@@ -1661,7 +1662,7 @@ static int __init it87_find(unsigned short *address,
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
}
if (sio_data->beep_pin)
pr_info("it87: Beeping is supported\n");
pr_info("Beeping is supported\n");
/* Disable specific features based on DMI strings */
board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
......@@ -1675,8 +1676,7 @@ static int __init it87_find(unsigned short *address,
the PWM2 duty cycle, so we disable it.
I use the board name string as the trigger in case
the same board is ever used in other systems. */
pr_info("it87: Disabling pwm2 due to "
"hardware constraints\n");
pr_info("Disabling pwm2 due to hardware constraints\n");
sio_data->skip_pwm = (1 << 1);
}
}
......@@ -2189,28 +2189,26 @@ static int __init it87_device_add(unsigned short address,
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Device allocation failed\n");
pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
printk(KERN_ERR DRVNAME ": Device resource addition failed "
"(%d)\n", err);
pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct it87_sio_data));
if (err) {
printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
err);
pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
......
......@@ -19,6 +19,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
......@@ -858,7 +860,7 @@ static int __init lm78_isa_found(unsigned short address)
* individually for the probing phase. */
for (port = address; port < address + LM78_EXTENT; port++) {
if (!request_region(port, 1, "lm78")) {
pr_debug("lm78: Failed to request port 0x%x\n", port);
pr_debug("Failed to request port 0x%x\n", port);
goto release;
}
}
......@@ -920,7 +922,7 @@ static int __init lm78_isa_found(unsigned short address)
found = 1;
if (found)
pr_info("lm78: Found an %s chip at %#x\n",
pr_info("Found an %s chip at %#x\n",
val & 0x80 ? "LM79" : "LM78", (int)address);
release:
......@@ -942,21 +944,19 @@ static int __init lm78_isa_device_add(unsigned short address)
pdev = platform_device_alloc("lm78", address);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR "lm78: Device allocation failed\n");
pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
printk(KERN_ERR "lm78: Device resource addition failed "
"(%d)\n", err);
pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR "lm78: Device addition failed (%d)\n",
err);
pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
......
......@@ -33,6 +33,8 @@
* the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F).
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
......@@ -1031,16 +1033,15 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
val = superio_inb(sioaddr, ACT);
if (!(val & 0x01)) {
printk(KERN_INFO "pc87360: Device 0x%02x not "
"activated\n", logdev[i]);
pr_info("Device 0x%02x not activated\n", logdev[i]);
continue;
}
val = (superio_inb(sioaddr, BASE) << 8)
| superio_inb(sioaddr, BASE + 1);
if (!val) {
printk(KERN_INFO "pc87360: Base address not set for "
"device 0x%02x\n", logdev[i]);
pr_info("Base address not set for device 0x%02x\n",
logdev[i]);
continue;
}
......@@ -1050,17 +1051,15 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
confreg[0] = superio_inb(sioaddr, 0xF0);
confreg[1] = superio_inb(sioaddr, 0xF1);
#ifdef DEBUG
printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
"ctrl=%d inv=%d\n", (confreg[0]>>2)&1,
(confreg[0]>>3)&1, (confreg[0]>>4)&1);
printk(KERN_DEBUG "pc87360: Fan 2: mon=%d "
"ctrl=%d inv=%d\n", (confreg[0]>>5)&1,
(confreg[0]>>6)&1, (confreg[0]>>7)&1);
printk(KERN_DEBUG "pc87360: Fan 3: mon=%d "
"ctrl=%d inv=%d\n", confreg[1]&1,
(confreg[1]>>1)&1, (confreg[1]>>2)&1);
#endif
pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 1,
(confreg[0] >> 2) & 1, (confreg[0] >> 3) & 1,
(confreg[0] >> 4) & 1);
pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 2,
(confreg[0] >> 5) & 1, (confreg[0] >> 6) & 1,
(confreg[0] >> 7) & 1);
pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 3,
confreg[1] & 1, (confreg[1] >> 1) & 1,
(confreg[1] >> 2) & 1);
} else if (i==1) { /* Voltages */
/* Are we using thermistors? */
if (*devid == 0xE9) { /* PC87366 */
......@@ -1071,13 +1070,11 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
confreg[3] = superio_inb(sioaddr, 0x25);
if (confreg[2] & 0x40) {
printk(KERN_INFO "pc87360: Using "
"thermistors for temperature "
"monitoring\n");
pr_info("Using thermistors for "
"temperature monitoring\n");
}
if (confreg[3] & 0xE0) {
printk(KERN_INFO "pc87360: VID "
"inputs routed (mode %u)\n",
pr_info("VID inputs routed (mode %u)\n",
confreg[3] >> 5);
}
}
......@@ -1616,7 +1613,7 @@ static int __init pc87360_device_add(unsigned short address)
pdev = platform_device_alloc("pc87360", address);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR "pc87360: Device allocation failed\n");
pr_err("Device allocation failed\n");
goto exit;
}
......@@ -1639,15 +1636,13 @@ static int __init pc87360_device_add(unsigned short address)
err = platform_device_add_resources(pdev, res, res_count);
if (err) {
printk(KERN_ERR "pc87360: Device resources addition failed "
"(%d)\n", err);
pr_err("Device resources addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR "pc87360: Device addition failed (%d)\n",
err);
pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
......@@ -1666,8 +1661,7 @@ static int __init pc87360_init(void)
if (pc87360_find(0x2e, &devid, extra_isa)
&& pc87360_find(0x4e, &devid, extra_isa)) {
printk(KERN_WARNING "pc87360: PC8736x not detected, "
"module not inserted.\n");
pr_warn("PC8736x not detected, module not inserted\n");
return -ENODEV;
}
......@@ -1680,8 +1674,7 @@ static int __init pc87360_init(void)
}
if (address == 0x0000) {
printk(KERN_WARNING "pc87360: No active logical device, "
"module not inserted.\n");
pr_warn("No active logical device, module not inserted\n");
return -ENODEV;
}
......
......@@ -22,6 +22,8 @@
* mode, and voltages aren't supported at all.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
......@@ -1077,7 +1079,7 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Out of memory\n");
pr_err("Out of memory\n");
goto exit;
}
......@@ -1196,28 +1198,26 @@ static int __init pc87427_device_add(const struct pc87427_sio_data *sio_data)
pdev = platform_device_alloc(DRVNAME, res[0].start);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Device allocation failed\n");
pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, res, res_count);
if (err) {
printk(KERN_ERR DRVNAME ": Device resource addition failed "
"(%d)\n", err);
pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct pc87427_sio_data));
if (err) {
printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
err);
pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
......@@ -1249,23 +1249,23 @@ static int __init pc87427_find(int sioaddr, struct pc87427_sio_data *sio_data)
val = superio_inb(sioaddr, SIOREG_ACT);
if (!(val & 0x01)) {
printk(KERN_INFO DRVNAME ": Logical device 0x%02x "
"not activated\n", logdev[i]);
pr_info("Logical device 0x%02x not activated\n",
logdev[i]);
continue;
}
val = superio_inb(sioaddr, SIOREG_MAP);
if (val & 0x01) {
printk(KERN_WARNING DRVNAME ": Logical device 0x%02x "
"is memory-mapped, can't use\n", logdev[i]);
pr_warn("Logical device 0x%02x is memory-mapped, "
"can't use\n", logdev[i]);
continue;
}
val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
| superio_inb(sioaddr, SIOREG_IOBASE + 1);
if (!val) {
printk(KERN_INFO DRVNAME ": I/O base address not set "
"for logical device 0x%02x\n", logdev[i]);
pr_info("I/O base address not set for logical device "
"0x%02x\n", logdev[i]);
continue;
}
sio_data->address[i] = val;
......
......@@ -689,6 +689,13 @@ static int __devexit via686a_remove(struct platform_device *pdev)
return 0;
}
static void via686a_update_fan_div(struct via686a_data *data)
{
int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
data->fan_div[0] = (reg >> 4) & 0x03;
data->fan_div[1] = reg >> 6;
}
static void __devinit via686a_init_device(struct via686a_data *data)
{
u8 reg;
......@@ -702,6 +709,9 @@ static void __devinit via686a_init_device(struct via686a_data *data)
via686a_write_value(data, VIA686A_REG_TEMP_MODE,
(reg & ~VIA686A_TEMP_MODE_MASK)
| VIA686A_TEMP_MODE_CONTINUOUS);
/* Pre-read fan clock divisor values */
via686a_update_fan_div(data);
}
static struct via686a_data *via686a_update_device(struct device *dev)
......@@ -753,9 +763,7 @@ static struct via686a_data *via686a_update_device(struct device *dev)
(via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
0xc0) >> 6;
i = via686a_read_value(data, VIA686A_REG_FANDIV);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
via686a_update_fan_div(data);
data->alarms =
via686a_read_value(data,
VIA686A_REG_ALARM1) |
......
......@@ -33,6 +33,8 @@
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
......@@ -1798,8 +1800,7 @@ w83781d_isa_found(unsigned short address)
* individually for the probing phase. */
for (port = address; port < address + W83781D_EXTENT; port++) {
if (!request_region(port, 1, "w83781d")) {
pr_debug("w83781d: Failed to request port 0x%x\n",
port);
pr_debug("Failed to request port 0x%x\n", port);
goto release;
}
}
......@@ -1811,7 +1812,7 @@ w83781d_isa_found(unsigned short address)
if (inb_p(address + 2) != val
|| inb_p(address + 3) != val
|| inb_p(address + 7) != val) {
pr_debug("w83781d: Detection failed at step 1\n");
pr_debug("Detection failed at step %d\n", 1);
goto release;
}
#undef REALLY_SLOW_IO
......@@ -1820,14 +1821,14 @@ w83781d_isa_found(unsigned short address)
MSB (busy flag) should be clear initially, set after the write. */
save = inb_p(address + W83781D_ADDR_REG_OFFSET);
if (save & 0x80) {
pr_debug("w83781d: Detection failed at step 2\n");
pr_debug("Detection failed at step %d\n", 2);
goto release;
}
val = ~save & 0x7f;
outb_p(val, address + W83781D_ADDR_REG_OFFSET);
if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
outb_p(save, address + W83781D_ADDR_REG_OFFSET);
pr_debug("w83781d: Detection failed at step 3\n");
pr_debug("Detection failed at step %d\n", 3);
goto release;
}
......@@ -1835,7 +1836,7 @@ w83781d_isa_found(unsigned short address)
outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if (val & 0x80) {
pr_debug("w83781d: Detection failed at step 4\n");
pr_debug("Detection failed at step %d\n", 4);
goto release;
}
outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
......@@ -1844,19 +1845,19 @@ w83781d_isa_found(unsigned short address)
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if ((!(save & 0x80) && (val != 0xa3))
|| ((save & 0x80) && (val != 0x5c))) {
pr_debug("w83781d: Detection failed at step 5\n");
pr_debug("Detection failed at step %d\n", 5);
goto release;
}
outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
pr_debug("w83781d: Detection failed at step 6\n");
pr_debug("Detection failed at step %d\n", 6);
goto release;
}
/* The busy flag should be clear again */
if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
pr_debug("w83781d: Detection failed at step 7\n");
pr_debug("Detection failed at step %d\n", 7);
goto release;
}
......@@ -1871,7 +1872,7 @@ w83781d_isa_found(unsigned short address)
found = 1;
if (found)
pr_info("w83781d: Found a %s chip at %#x\n",
pr_info("Found a %s chip at %#x\n",
val == 0x30 ? "W83782D" : "W83781D", (int)address);
release:
......@@ -1894,21 +1895,19 @@ w83781d_isa_device_add(unsigned short address)
pdev = platform_device_alloc("w83781d", address);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR "w83781d: Device allocation failed\n");
pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
printk(KERN_ERR "w83781d: Device resource addition failed "
"(%d)\n", err);
pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
err);
pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
......
......@@ -691,13 +691,23 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
}
static ssize_t
show_regs_chassis(struct device *dev, struct device_attribute *attr,
show_chassis(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct w83792d_data *data = w83792d_update_device(dev);
return sprintf(buf, "%d\n", data->chassis);
}
static ssize_t
show_regs_chassis(struct device *dev, struct device_attribute *attr,
char *buf)
{
dev_warn(dev,
"Attribute %s is deprecated, use intrusion0_alarm instead\n",
"chassis");
return show_chassis(dev, attr, buf);
}
static ssize_t
show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
{
......@@ -706,7 +716,7 @@ show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
}
static ssize_t
store_chassis_clear(struct device *dev, struct device_attribute *attr,
store_chassis_clear_legacy(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
......@@ -714,6 +724,10 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr,
u32 val;
u8 temp1 = 0, temp2 = 0;
dev_warn(dev,
"Attribute %s is deprecated, use intrusion0_alarm instead\n",
"chassis_clear");
val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->chassis_clear = SENSORS_LIMIT(val, 0 ,1);
......@@ -726,6 +740,27 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr,
return count;
}
static ssize_t
store_chassis_clear(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83792d_data *data = i2c_get_clientdata(client);
unsigned long val;
u8 reg;
if (strict_strtoul(buf, 10, &val) || val != 0)
return -EINVAL;
mutex_lock(&data->update_lock);
reg = w83792d_read_value(client, W83792D_REG_CHASSIS_CLR);
w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, reg | 0x80);
data->valid = 0; /* Force cache refresh */
mutex_unlock(&data->update_lock);
return count;
}
/* For Smart Fan I / Thermal Cruise */
static ssize_t
show_thermal_cruise(struct device *dev, struct device_attribute *attr,
......@@ -1012,7 +1047,9 @@ static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22);
static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23);
static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
show_chassis_clear, store_chassis_clear);
show_chassis_clear, store_chassis_clear_legacy);
static DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
show_chassis, store_chassis_clear);
static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
......@@ -1214,6 +1251,7 @@ static struct attribute *w83792d_attributes[] = {
&dev_attr_alarms.attr,
&dev_attr_chassis.attr,
&dev_attr_chassis_clear.attr,
&dev_attr_intrusion0_alarm.attr,
&sensor_dev_attr_tolerance1.dev_attr.attr,
&sensor_dev_attr_thermal_cruise1.dev_attr.attr,
&sensor_dev_attr_tolerance2.dev_attr.attr,
......
......@@ -51,7 +51,6 @@
#define WATCHDOG_TIMEOUT 2 /* 2 minute default timeout */
/* Addresses to scan */
static DEFINE_MUTEX(watchdog_mutex);
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
I2C_CLIENT_END };
......@@ -421,7 +420,7 @@ store_beep_enable(struct device *dev, struct device_attribute *attr,
/* Write any value to clear chassis alarm */
static ssize_t
store_chassis_clear(struct device *dev,
store_chassis_clear_legacy(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
......@@ -429,6 +428,9 @@ store_chassis_clear(struct device *dev,
struct w83793_data *data = i2c_get_clientdata(client);
u8 val;
dev_warn(dev, "Attribute chassis is deprecated, "
"use intrusion0_alarm instead\n");
mutex_lock(&data->update_lock);
val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
val |= 0x80;
......@@ -437,6 +439,28 @@ store_chassis_clear(struct device *dev,
return count;
}
/* Write 0 to clear chassis alarm */
static ssize_t
store_chassis_clear(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83793_data *data = i2c_get_clientdata(client);
unsigned long val;
u8 reg;
if (strict_strtoul(buf, 10, &val) || val != 0)
return -EINVAL;
mutex_lock(&data->update_lock);
reg = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
w83793_write_value(client, W83793_REG_CLR_CHASSIS, reg | 0x80);
data->valid = 0; /* Force cache refresh */
mutex_unlock(&data->update_lock);
return count;
}
#define FAN_INPUT 0
#define FAN_MIN 1
static ssize_t
......@@ -1102,6 +1126,8 @@ static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
static struct sensor_device_attribute_2 sda_single_files[] = {
SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear_legacy, ALARM_STATUS, 30),
SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 30),
SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
store_beep_enable, NOT_USED, NOT_USED),
......@@ -1323,7 +1349,7 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf,
static long watchdog_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
static struct watchdog_info ident = {
struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT |
WDIOF_CARDRESET,
......@@ -1333,7 +1359,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd,
int val, ret = 0;
struct w83793_data *data = filp->private_data;
mutex_lock(&watchdog_mutex);
switch (cmd) {
case WDIOC_GETSUPPORT:
if (!nowayout)
......@@ -1387,7 +1412,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd,
default:
ret = -ENOTTY;
}
mutex_unlock(&watchdog_mutex);
return ret;
}
......
......@@ -458,6 +458,7 @@ static void w83795_update_limits(struct i2c_client *client)
{
struct w83795_data *data = i2c_get_clientdata(client);
int i, limit;
u8 lsb;
/* Read the voltage limits */
for (i = 0; i < ARRAY_SIZE(data->in); i++) {
......@@ -479,9 +480,8 @@ static void w83795_update_limits(struct i2c_client *client)
}
/* Read the fan limits */
lsb = 0; /* Silent false gcc warning */
for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
u8 lsb;
/* Each register contains LSB for 2 fans, but we want to
* read it only once to save time */
if ((i & 1) == 0 && (data->has_fan & (3 << i)))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment