Commit 182f5696 authored by Ganapathi Bhat's avatar Ganapathi Bhat Committed by Kalle Valo

mwifiex: Support USB interrupt endpoint for command response/event

USB firmware added support for sending command response/event through
interrupt endpoint, to enhance RX throughput. Added corresponding changes
required to support this feature. This change takes care of backward
compatibility with older firmware.
Signed-off-by: default avatarGanapathi Bhat <gbhat@marvell.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 1c92af00
......@@ -306,9 +306,17 @@ static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size)
}
}
if (card->rx_cmd_ep == ctx->ep &&
card->rx_cmd_ep_type == USB_ENDPOINT_XFER_INT)
usb_fill_int_urb(ctx->urb, card->udev,
usb_rcvintpipe(card->udev, ctx->ep),
ctx->skb->data, size, mwifiex_usb_rx_complete,
(void *)ctx, card->rx_cmd_interval);
else
usb_fill_bulk_urb(ctx->urb, card->udev,
usb_rcvbulkpipe(card->udev, ctx->ep), ctx->skb->data,
size, mwifiex_usb_rx_complete, (void *)ctx);
usb_rcvbulkpipe(card->udev, ctx->ep),
ctx->skb->data, size, mwifiex_usb_rx_complete,
(void *)ctx);
if (card->rx_cmd_ep == ctx->ep)
atomic_inc(&card->rx_cmd_urb_pending);
......@@ -424,10 +432,13 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
epd = &iface_desc->endpoint[i].desc;
if (usb_endpoint_dir_in(epd) &&
usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT &&
usb_endpoint_xfer_bulk(epd)) {
pr_debug("info: bulk IN: max pkt size: %d, addr: %d\n",
(usb_endpoint_xfer_bulk(epd) ||
usb_endpoint_xfer_int(epd))) {
card->rx_cmd_ep_type = usb_endpoint_type(epd);
card->rx_cmd_interval = epd->bInterval;
pr_debug("info: Rx CMD/EVT:: max pkt size: %d, addr: %d, ep_type: %d\n",
le16_to_cpu(epd->wMaxPacketSize),
epd->bEndpointAddress);
epd->bEndpointAddress, card->rx_cmd_ep_type);
card->rx_cmd_ep = usb_endpoint_num(epd);
atomic_set(&card->rx_cmd_urb_pending, 0);
}
......@@ -461,10 +472,16 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
}
if (usb_endpoint_dir_out(epd) &&
usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT &&
usb_endpoint_xfer_bulk(epd)) {
(usb_endpoint_xfer_bulk(epd) ||
usb_endpoint_xfer_int(epd))) {
card->tx_cmd_ep_type = usb_endpoint_type(epd);
card->tx_cmd_interval = epd->bInterval;
pr_debug("info: bulk OUT: max pkt size: %d, addr: %d\n",
le16_to_cpu(epd->wMaxPacketSize),
epd->bEndpointAddress);
pr_debug("info: Tx CMD:: max pkt size: %d, addr: %d, ep_type: %d\n",
le16_to_cpu(epd->wMaxPacketSize),
epd->bEndpointAddress, card->tx_cmd_ep_type);
card->tx_cmd_ep = usb_endpoint_num(epd);
atomic_set(&card->tx_cmd_urb_pending, 0);
card->bulk_out_maxpktsize =
......@@ -884,8 +901,16 @@ static int mwifiex_usb_host_to_card(struct mwifiex_adapter *adapter, u8 ep,
context->skb = skb;
tx_urb = context->urb;
usb_fill_bulk_urb(tx_urb, card->udev, usb_sndbulkpipe(card->udev, ep),
data, skb->len, mwifiex_usb_tx_complete,
if (ep == card->tx_cmd_ep &&
card->tx_cmd_ep_type == USB_ENDPOINT_XFER_INT)
usb_fill_int_urb(tx_urb, card->udev,
usb_sndintpipe(card->udev, ep), data,
skb->len, mwifiex_usb_tx_complete,
(void *)context, card->tx_cmd_interval);
else
usb_fill_bulk_urb(tx_urb, card->udev,
usb_sndbulkpipe(card->udev, ep), data,
skb->len, mwifiex_usb_tx_complete,
(void *)context);
tx_urb->transfer_flags |= URB_ZERO_PACKET;
......
......@@ -90,6 +90,10 @@ struct usb_card_rec {
struct urb_context tx_cmd;
u8 mc_resync_flag;
struct usb_tx_data_port port[MWIFIEX_TX_DATA_PORT];
int rx_cmd_ep_type;
u8 rx_cmd_interval;
int tx_cmd_ep_type;
u8 tx_cmd_interval;
};
struct fw_header {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment