Merge http://linux-voyager.bkbits.net/eisa-sysfs-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

Merge http://linux-voyager.bkbits.net/eisa-sysfs-2.5
into home.transmeta.com:/home/torvalds/v2.5/linux
188db2b9 · Linus Torvalds · 91f5fe70 · eb420b6f · 188db2b9 · 188db2b9
Commit 188db2b9 authored Jan 15, 2003 by Linus Torvalds
12 changed files
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -535,6 +535,7 @@ config VERBOSE_MCHECK
 	bool "Verbose Machine Checks"

 source "drivers/pci/Kconfig"
+source "drivers/eisa/Kconfig"

 config HOTPLUG
 	bool "Support for hot-pluggable devices"

--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -1181,6 +1181,8 @@ config EISA

 	  Otherwise, say N.

+source "drivers/eisa/Kconfig"
+
 config MCA
 	bool "MCA support"
 	depends on !(X86_VISWS || X86_VOYAGER)

--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_BT)		+= bluetooth/
 obj-$(CONFIG_HOTPLUG_PCI)	+= hotplug/
 obj-$(CONFIG_ISDN_BOOL)		+= isdn/
 obj-$(CONFIG_MCA)		+= mca/
+obj-$(CONFIG_EISA)		+= eisa/
--- a/drivers/eisa/Kconfig
+++ b/drivers/eisa/Kconfig
+#
+# PCI configuration
+#
+config EISA_NAMES
+	bool "EISA device name database"
+	depends on EISA
+	default y
+	---help---
+	  By default, the kernel contains a database of all known EISA
+	  device names to make the information in sysfs comprehensible
+	  to the user. This database increases size of the kernel
+	  image by about 40KB, but it gets freed after the system
+	  boots up, so it doesn't take up kernel memory. Anyway, if
+	  you are building an installation floppy or kernel for an
+	  embedded system where kernel image size really matters, you
+	  can disable this feature and you'll get device ID instead of
+	  names.
+
+	  When in doubt, say Y.
+
--- a/drivers/eisa/Makefile
+++ b/drivers/eisa/Makefile
+# Makefile for the Linux device tree
+
+obj-$(CONFIG_EISA)	+= eisa-bus.o
+
+export-objs	:= eisa-bus.o
+
+clean-files:= devlist.h
+
+# Ugly hack to get DEVICE_NAME_SIZE value...
+DEVICE_NAME_SIZE:=$(shell awk '$$1=="\#define" && $$2=="DEVICE_NAME_SIZE" {print $$3-1}' $(srctree)/include/linux/device.h)
+
+$(obj)/eisa-bus.o: $(obj)/devlist.h
+
+$(obj)/devlist.h: $(src)/eisa.ids $(srctree)/include/linux/device.h
+	sed -e '/^#/D' -e 's/^\([[:alnum:]]\{7\}\) \+"\([^"]\{1,$(DEVICE_NAME_SIZE)\}\).*"/EISA_DEVINFO ("\1", "\2"),/' $< > $@
+
+$(src)/eisa.ids:
+	touch $@
--- a/drivers/eisa/eisa-bus.c
+++ b/drivers/eisa/eisa-bus.c
+/*
+ * EISA bus support functions for sysfs.
+ *
+ * (C) 2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
+ *
+ * This code is released under the GPL version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/eisa.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#define EISA_DEVINFO(i,s) { .id = { .sig = i }, .name = s }
+
+struct eisa_device_info {
+	struct eisa_device_id id;
+	char name[DEVICE_NAME_SIZE];
+};
+
+struct eisa_device_info __initdata eisa_table[] = {
+#ifdef CONFIG_EISA_NAMES
+#include "devlist.h"
+#endif
+};
+
+#define EISA_INFOS (sizeof (eisa_table) / (sizeof (struct eisa_device_info)))
+
+static void __init eisa_name_device (struct eisa_device *edev)
+{
+	int i;
+
+	for (i = 0; i < EISA_INFOS; i++) {
+		if (!strcmp (edev->id.sig, eisa_table[i].id.sig)) {
+			strncpy (edev->dev.name,
+				 eisa_table[i].name,
+				 DEVICE_NAME_SIZE - 1);
+			return;
+		}
+	}
+
+	/* No name was found */
+	sprintf (edev->dev.name, "EISA device %.7s", edev->id.sig);
+}
+
+static char __init *decode_eisa_sig(unsigned long addr)
+{
+        static char sig_str[EISA_SIG_LEN];
+	u8 sig[4];
+        u16 rev;
+	int i;
+
+	sig[0] = inb (addr);
+
+	if (sig[0] & 0x80)
+                return NULL;
+
+	for (i = 1; i < 4; i++)
+		sig[i] = inb (addr + i);
+	
+        sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
+        sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
+        sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
+        rev = (sig[2] << 8) | sig[3];
+        sprintf(sig_str + 3, "%04X", rev);
+
+        return sig_str;
+}
+
+static int eisa_bus_match (struct device *dev, struct device_driver *drv)
+{
+	struct eisa_device *edev = to_eisa_device (dev);
+	struct eisa_driver *edrv = to_eisa_driver (drv);
+	const struct eisa_device_id *eids = edrv->id_table;
+
+	if (!eids)
+		return 0;
+
+	while (strlen (eids->sig)) {
+		if (!strcmp (eids->sig, edev->id.sig))
+			return 1;
+
+		eids++;
+	}
+
+	return 0;
+}
+
+struct bus_type eisa_bus_type = {
+	.name  = "eisa",
+	.match = eisa_bus_match,
+};
+
+/* The default EISA device parent (virtual root device). */
+static struct device eisa_bus_root = {
+       .name           = "EISA Bridge",
+       .bus_id         = "eisa",
+};
+
+int eisa_driver_register (struct eisa_driver *edrv)
+{
+	int r;
+	
+	edrv->driver.bus = &eisa_bus_type;
+	if ((r = driver_register (&edrv->driver)) < 0)
+		return r;
+
+	return 1;
+}
+
+void eisa_driver_unregister (struct eisa_driver *edrv)
+{
+	driver_unregister (&edrv->driver);
+}
+
+static ssize_t eisa_show_sig (struct device *dev, char *buf)
+{
+        struct eisa_device *edev = to_eisa_device (dev);
+        return sprintf (buf,"%s\n", edev->id.sig);
+}
+
+static DEVICE_ATTR(signature, S_IRUGO, eisa_show_sig, NULL);
+
+static void __init eisa_register_device (char *sig, int slot)
+{
+	struct eisa_device *edev;
+
+	if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL)))
+		return;
+
+	memset (edev, 0, sizeof (*edev));
+	memcpy (edev->id.sig, sig, 7);
+	edev->slot = slot;
+	edev->base_addr = 0x1000 * slot;
+	eisa_name_device (edev);
+	edev->dev.parent = &eisa_bus_root;
+	edev->dev.bus = &eisa_bus_type;
+	sprintf (edev->dev.bus_id, "00:%02X", slot);
+
+	/* Don't register resource for slot 0, since this will surely
+	 * fail... :-( */
+
+	if (slot) {
+		edev->res.name  = edev->dev.name;
+		edev->res.start = edev->base_addr;
+		edev->res.end   = edev->res.start + 0xfff;
+		edev->res.flags = IORESOURCE_IO;
+
+		if (request_resource (&ioport_resource, &edev->res)) {
+			printk (KERN_WARNING \
+				"Cannot allocate resource for EISA slot %d\n",
+				slot);
+			kfree (edev);
+			return;
+		}
+	}
+	
+	if (device_register (&edev->dev)) {
+		kfree (edev);
+		return;
+	}
+
+	device_create_file (&edev->dev, &dev_attr_signature);
+}
+
+static int __init eisa_probe (void)
+{
+        int i, c;
+        char *str;
+        unsigned long slot_addr;
+
+        printk (KERN_INFO "EISA: Probing bus...\n");
+        for (c = 0, i = 0; i <= EISA_MAX_SLOTS; i++) {
+                slot_addr = (0x1000 * i) + EISA_VENDOR_ID_OFFSET;
+                if ((str = decode_eisa_sig (slot_addr))) {
+			if (!i)
+				printk (KERN_INFO "EISA: Motherboard %s detected\n",
+					str);
+			else {
+				printk (KERN_INFO "EISA: slot %d : %s detected.\n",
+					i, str);
+
+				c++;
+			}
+
+			eisa_register_device (str, i);
+                }
+        }
+        printk (KERN_INFO "EISA: Detected %d card%s.\n", c, c < 2 ? "" : "s");
+
+	return 0;
+}
+
+static int __init eisa_init (void)
+{
+	int r;
+	
+	if ((r = bus_register (&eisa_bus_type)))
+		return r;
+	
+	if ((r = device_register (&eisa_bus_root))) {
+		bus_unregister (&eisa_bus_type);
+		return r;
+	}
+
+	printk (KERN_INFO "EISA bus registered\n");
+	return eisa_probe ();
+}
+
+postcore_initcall (eisa_init);
+
+EXPORT_SYMBOL (eisa_bus_type);
+EXPORT_SYMBOL (eisa_driver_register);
+EXPORT_SYMBOL (eisa_driver_unregister);
--- a/drivers/eisa/eisa.ids
+++ b/drivers/eisa/eisa.ids
+# This list is a compilation of EISA ids.
+# It also includes numerous ISA cards for which an EISA id
+# has been allocated.
+#
+# Please send any patch/addition/correction to
+# Marc Zyngier <maz@wild-wind.fr.eu.org>
+#
+# Many entries were contributed by Andries.Brouwer@cwi.nl
+
+ABP0510 "Advansys ABP-510 ISA SCSI Host Adapter"
+ABP0540 "Advansys ABP-540/542 ISA SCSI Host Adapter"
+ABP7401 "AdvanSys ABP-740/742 EISA Single Channel SCSI Host Adapter"
+ABP7501 "AdvanSys ABP-750/752 EISA Dual Channel SCSI Host Adapter"
+ACC1200 "ACCTON EtherCombo-32 Ethernet Adapter"
+ACC120A "ACCTON EtherCombo-32 Ethernet Adapter"
+ACC1650 "Accton MPX Ethernet Adapter (EN165x)"
+ACC1660 "Accton MPX Ethernet Adapter (EN166x)"
+ACE1010 "ACME Super Fast System Board"
+ACE2010 "ACME PC Network"
+ACE3010 "ACME Arcnet Plan"
+ACE3030 "ACME Sample VS Board 1"
+ACE4010 "ACME Tape Controller"
+ACE5010 "ACME VDU Video Board"
+ACE6010 "ACME Disk Controller"
+ACE7010 "ACME Multi-Function Board"
+ACR1201 "Acer 1200 486/25 EISA System Board"
+ACR1211 "AcerFrame 3000SP33 486/33 EISA System Board"
+ACR1341 "M1 486SX/20 CPU Board"
+ACR1351 "M1 486SX/20 CPU Board"
+ACR1361 "M1 487/20 CPU Board"
+ACR1371 "M1 487/20 CPU Board"
+ACR1381 "M1 486/20 CPU Board"
+ACR1391 "M1 486/20 CPU Board"
+ACR1581 "M1 486/33 CPU Board"
+ACR1591 "M1 486/33 CPU Board"
+ACR15A1 "M1 486/33 CPU Board"
+ACR15B1 "M1 486/33 CPU Board"
+ACR1701 "AcerFrame 1000"
+ACR1711 "AcerFrame 1000 486/33 SYSTEM-2"
+ACR1801 "Acer P43WE EISA System Board"
+ACR3211 "AcerFrame 3000MP 486 SYSTEM-1"
+ACR3221 "AcerFrame 486 Series SYSTEM-2"
+ACR3231 "AcerFrame 486 Series SYSTEM-3"
+ACR3241 "AcerFrame 486 Series SYSTEM-4"
+ACR3261 "AcerFrame 3000MP 486 SYSTEM-1"
+ACR3271 "AcerFrame 486 Series SYSTEM-2"
+ACR3281 "AcerFrame 486 Series SYSTEM-3"
+ACR3291 "AcerFrame 486 Series SYSTEM-4"
+ACR4509 "ACER/Altos M1 System Board"
+ADI0001 "Lightning Networks 32-Bit EISA Ethernet LAN Adapter"
+ADP0000 "Adaptec AHA-1740 SCSI"
+ADP0001 "Adaptec AHA-1740A SCSI"
+ADP0002 "Adaptec AHA-1742A SCSI"
+ADP0100 "Adaptec AHA-1540/1542 ISA SCSI Host Adapter"
+AIM0002 "AUVA OPTi/EISA 32-Bit 486 All-in-One System Board"
+ADP0200 "Adaptec AHA-1520/1522 ISA SCSI Host Adapter"
+ADP0400 "Adaptec AHA-1744 SCSI"
+ADP7756 "Adaptec AHA-284x SCSI (BIOS enabled)"
+ADP7757 "Adaptec AHA-284x SCSI (BIOS disabled)"
+ADP7770 "Adaptec AIC-7770 SCSI (on motherboard)"
+ADP7771 "Adaptec AHA-274x SCSI"
+AEI0401 "486EI EISA System Board"
+AEO0301 "486EO EISA System Board"
+AIR0101 "AIR486SE/25/33 EISA Baby AT-foot print motherboard."
+AIR0103 "AIR486SE/25/33/50"
+AIR0201 "AIR486LE/25/33/50"
+AIR0301 "AIR 486EO EISA System Board"
+AIR0401 "486EI EISA System Board"
+AIR0501 "AIR 586EP PCI/EISA System Board"
+AIR0601 "AIR 54CEP PCI/EISA System Board"
+AIR0701 "AIR 54CDP PCI/EISA System Board"
+AIR0702 "AIR 54CDP PCI/EISA Dual-Processors System Board"
+AIR0901 "AIR 54TDP PCI/EISA Dual-Processors System Board"
+AIR1001 "AIR P6NDP PCI/EISA Dual-Pentium Processor System Board"
+AIR2001 "AIR SCSI-2E"
+AIR2101 "AIR SCSI-2V"
+AIR3001 "ENET2E EISA BUS MASTER ETHERNET ADAPTER"
+AIR3101 "ENET-2V LOCAL BUS MASTER ETHERNET ADAPTER"
+ALR0001 "Power/Business VEISA System Board"
+ALR0041 "PowerPro System Board"
+ALR0181 "PowerPro System Board"
+ALR0241 "Evolution V Pentium Tower System Board"
+ALR0341 "EISA PCI base System Board"
+ALR3000 "80486 Processor Module"
+ALR3010 "Pentium Processor Board"
+ALR3023 "ALR 16-bit VGA without Parallel port"
+ALR8580 "Advanced Disk Array Caching EISA Controller"
+ALRA0C1 "System Board"
+ALRA301 "Revolution Q-SMP System Board"
+ALRA311 "Revolution Q-2SMP System Board"
+ALRB0A0 "Primary System Processor Board - 80486DX2/66"
+ALRB0B0 "Secondary System Processor Board - 80486DX2/66"
+AMI44C1 "AMI SCSI Host Adapter - Series 44"
+AMI15C1 "AMI SCSI Host Adapter"
+AMI15D1 "AMI SCSI Host Adapter - Rev 2"
+AMI15E1 "AMI Normal Single Ended EISA SCSI CACHING Controller-Ver 1.22"
+AMI16B1 "AMI ENTERPRISE EISA system board"
+AMI2509 "AMI ENTERPRISE EISA system board"
+AMI25B1 "AMI ENTERPRISE EISA system board"
+AMI28A1 "AMI EZ-FLEX EISA System Board"
+AMI44D2 "AMI Fast Single Ended EISA SCSI CACHING Controller"
+AMI4801 "AMI Series 48 EISA Fast SCSI Host Adapter"
+AMI68B1 "AMI Enterprise III 486 EISA System Board"
+APS0101 "EISA PIP INTERFACE"
+APS0102 "EISA PIP INTERFACE"
+APS0103 "EISA PIP INTERFACE"
+ARC0010 "Alta EtherTPI/Combo"
+ARC0020 "Alta TokenCombo-16 S/U"
+ASU0100 "ASUS EISA-SC100 SCSI Cache Host Adapter (CFG file V2.0)"
+ASU0500 "ASUS EISA-L500 Ethernet LAN ADAPTER"
+ASU4001 "EISA-486C Main Board"
+ASU4101 "EISA-486E Main Board"
+ASU4201 "EISA-486A Main Board"
+ASU4301 "EISA-486SI Main Board"
+ASU4501 "Mini EISA-486H Main Board"
+ASU4701 "Mini EISA-486AS Main Board"
+ASU4901 "VL/EISA-486SV1 Main Board"
+ASU5101 "PCI/E-P5MP4 or PCI/E-P54NP4 Main Board V2.3"
+ASU5201 "P/E-P55T2P4D  Main Board (CFG File V1.2)"
+ATI1500 "ATI AT-1500 Ethernet Adapter Card"
+ATI1700 "ATI AT-1700 Ethernet Adapter Card"
+ATI4400 "mach32 EISA Video Accelerator Card"
+ATI4402 "mach32 EISA Video Accelerator Card"
+ATI4410 "mach32 Video Accelerator Card"
+ATI4420 "mach32 Video Accelerator Card"
+ATI4430 "mach32 VLB Video Accelerator Card"
+ATT2402 "AT&T SCSI Host Adapter A (StarServer E)"
+ATT2404 "DPT SCSI Host Bus Adapter (PM2012B/9X)"
+AVI2E01 "AVIEW2E EISA SVGA Adapter"
+AVM0001 "AVM ISDN-Controller A1"
+BAN0440 "Banyan ICA"
+BAN0670 "Banyan ICAplus"
+BAN0680 "Banyan ICA/RM"
+BUS4201 "BusTek/BusLogic Bt74xB 32-Bit Bus Master EISA-to-SCSI Host Adapter"
+BUS4202 "BusTek/BusLogic Bt74xC 32-Bit Bus Master EISA-to-SCSI Host Adapter"
+BUS6001 "BusTek/BusLogic Bt760 32-Bit Bus Master EISA-to-Ethernet Controller"
+BUS6301 "BusTek/BusLogic Bt763E EISA 32-Bit 82596-based Ethernet Controller"
+CCI0000 "Cache Computers, Inc. Memory Refresh Controller"
+CCI1001 "Cache Computers Inc. 486/25  EISA System Board"
+CCI2001 "Cache Computers Inc. 486/33  EISA System Board"
+CCI3001 "Cache Computers, Inc. Modular EISA System Board"
+CCI3009 "Cache Computers Inc. Modular EISA System Board"
+CCI4000 "Cache Computers, Inc. 486/33 CPU Board"
+CCI4001 "Cache Computers, Inc. 486/33 CPU Board"
+CCI5001 "Cache Computers, Inc. 486/50 CPU Board"
+CCI6001 "Cache Computer EISA Ethernet LAN Adapter"
+CCI7001 "Cache Computers, Inc. EISA System Board"
+CCI8001 "Cache Computers, Inc. EISA System Board"
+CHAA041 "Chase AT4 Intelligent Serial Controller"
+CHAA081 "Chase AT8 Intelligent Serial Controller"
+CHAA091 "Chase AT8+ Intelligent Serial Controller"
+CHAA161 "Chase AT16 Intelligent Serial Controller"
+CHAA171 "Chase AT16+ Intelligent Serial Controller"
+CMD0003 "CMD Technology, Inc. EISA SCSI Host Adapter"
+CNT2000 "900E/950E EISA Bus 32-bit Ethernet LAN Adapter"
+COG5000 "Cogent eMASTER+ AT Combo 16-Bit Workstation Ethernet Adapter"
+COG7002 "Cogent eMASTER+ ATS Combo Bus-Mastering Ethernet Adapter"
+COG9002 "Cogent eMASTER+ EISA XL 32-Bit Burst-mode Ethernet Adapter"
+CPQ0101 "Compaq SYSTEMPRO System Board"
+CPQ0109 "Compaq SYSTEMPRO System Board (ASSY # 001981)"
+CPQ0401 "Compaq DESKPRO 486/33L or 386/33L System Board"
+CPQ0501 "Compaq DESKPRO/M System Board"
+CPQ0509 "Compaq DESKPRO/M System Board with Audio"
+CPQ0511 "Compaq SYSTEMPRO/LT System Board"
+CPQ0601 "Compaq ProSignia Server"
+CPQ0609 "Compaq ProSignia Server"
+CPQ0611 "Compaq ProSignia Server"
+CPQ0621 "Compaq ProSignia Server (ASSY # 3154)"
+CPQ0629 "Compaq ProSignia Server (ASSY # 3154)"
+CPQ0631 "Compaq ProLiant 1000 Server"
+CPQ0639 "Compaq ProLiant 1000 Server"
+CPQ1001 "Compaq Portable 486"
+CPQ1009 "Compaq Portable 486/66"
+CPQ1201 "Compaq DESKPRO 486/25"
+CPQ1301 "Compaq DESKPRO 486/50L"
+CPQ1401 "Compaq Portable 486c"
+CPQ1409 "Compaq Portable 486c/66"
+CPQ1501 "Compaq SYSTEMPRO/XL Server"
+CPQ1509 "Compaq ProLiant 4000 Server"
+CPQ1519 "Compaq ProLiant 2000 Server"
+CPQ3001 "Compaq Advanced VGA"
+CPQ3011 "Compaq QVision 1024/E Video Controller"
+CPQ3021 "Compaq QVision 1024/I Video Controller"
+CPQ3111 "Compaq QVision 1024/E Graphics Controller"
+CPQ3112 "Compaq QVision 1280/E Graphics Controller"
+CPQ3121 "Compaq QVision 1024/I Graphics Controller"
+CPQ3122 "Compaq QVision 1280/I Graphics Controller"
+CPQ4001 "Compaq 32-Bit Intelligent Drive Array Controller"
+CPQ4002 "Compaq Intelligent Drive Array Controller-2"
+CPQ4010 "Compaq 32-Bit Intelligent Drive Array Expansion Controller"
+CPQ4020 "Compaq SMART Array Controller"
+CPQ4300 "Compaq Advanced ESDI Fixed Disk Controller"
+CPQ4401 "Compaq Integrated SCSI-2 Options Port"
+CPQ4410 "Compaq Integrated 32-Bit Fast-SCSI-2 Controller"
+CPQ4411 "Compaq 32-Bit Fast-SCSI-2 Controller"
+CPQ4420 "Compaq 6260 SCSI-2 Controller"
+CPQ5000 "Compaq 386/33 System Processor Board used as Secondary"
+CPQ5281 "Compaq 486/50 System Processor Board used as Secondary"
+CPQ5282 "Compaq 486/50 System Processor Board used as Secondary"
+CPQ5287 "Compaq 5/66 System Processor Board used as Secondary"
+CPQ528F "Compaq 486DX2/66 System Processor Board used as Secondary"
+CPQ5900 "Compaq 486/33 System Processor Board used as Secondary"
+CPQ5A00 "Compaq 486/33 System Processor Board (ASSY # 002013) used as Secondary"
+CPQ5B00 "Compaq 486DX2/66 System Processor Board used as Secondary"
+CPQ5C00 "Compaq 486/33 System Processor Board used as Secondary"
+CPQ6000 "Compaq 32-Bit DualSpeed Token Ring Controller"
+CPQ6001 "Compaq 32-Bit DualSpeed Token Ring Controller"
+CPQ6100 "Compaq 32-Bit NetFlex Controller"
+CPQ6101 "Compaq NetFlex-2 Controller"
+CPQ6200 "Compaq DualPort Ethernet Controller"
+CPQ7000 "Compaq 32-Bit Server Manager/R Board"
+CPQ7001 "Compaq 32-Bit Server Manager/R Board"
+CPQ9004 "Compaq 386/33 Processor Board"
+CPQ9005 "Compaq 386/25 Processor Board"
+CPQ9013 "Compaq 486DX2/66 System Processor Board used as Primary"
+CPQ9014 "Compaq 486/33 System Processor Board used as Primary"
+CPQ9015 "Compaq 486/33 Processor Board"
+CPQ9016 "Compaq 486DX2/66 Processor Board"
+CPQ9017 "Compaq 486DX2/50 Processor Board"
+CPQ9018 "Compaq 486/33 Processor Board (8 MB)"
+CPQ9034 "Compaq 486SX/25 Processor Board"
+CPQ9035 "Compaq 486SX/16 Processor Board"
+CPQ9036 "Compaq 486SX/25 Processor Board (8 MB)"
+CPQ9037 "Compaq 486SX/16 Processor Board (8 MB)"
+CPQ9038 "Compaq 486SX/33 Processor Board (8 MB)"
+CPQ903C "Compaq 486SX/33 Processor Board (4 MB)"
+CPQ9040 "Compaq 5/66 Processor Board"
+CPQ9041 "Compaq 5/66 Processor Board"
+CPQ9042 "Compaq 5/66 Processor Board"
+CPQ9043 "Compaq 5/66 Processor Board"
+CPQ9044 "Compaq 5/60 Processor Board"
+CPQ9045 "Compaq 5/60 Processor Board"
+CPQ9046 "Compaq 5/60 Processor Board"
+CPQ9047 "Compaq 5/60 Processor Board"
+CPQ9281 "Compaq 486/50 System Processor Board used as Primary"
+CPQ9282 "Compaq 486/50 System Processor Board used as Primary"
+CPQ9287 "Compaq 5/66 System Processor Board used as Primary"
+CPQ928F "Compaq 486DX2/66 System Processor Board used as Primary"
+CPQ9381 "Compaq 486/50 System Processor Board"
+CPQ9382 "Compaq 486/50 System Processor Board"
+CPQ9387 "Compaq 5/66 System Processor Board"
+CPQ9481 "Compaq 486/50 System Processor Board"
+CPQ9482 "Compaq 486/50 System Processor Board"
+CPQ9487 "Compaq 5/66 System Processor Board"
+CPQ9901 "Compaq 486SX/16 Processor Board"
+CPQ9902 "Compaq 486SX/16 Processor Board"
+CPQ9903 "Compaq 486SX/25 Processor Board"
+CPQ9904 "Compaq 486SX/25 Processor Board"
+CPQ9905 "Compaq 486SX/25 Processor Board"
+CPQ9906 "Compaq 486/33 Processor Board"
+CPQ9907 "Compaq 486DX2/66 Processor Board"
+CPQ9908 "Compaq 486SX/16 Processor Board"
+CPQ9909 "Compaq 486SX/16 Processor Board"
+CPQ990A "Compaq 486SX/25 Processor Board"
+CPQ990B "Compaq 486SX/25 Processor Board"
+CPQ990C "Compaq 486SX/25 Processor Board"
+CPQ990D "Compaq 486/33 Processor Board"
+CPQ990E "Compaq 486SX/33 Processor Board (8 MB)"
+CPQ990F "Compaq 486SX/33 Processor Board (8 MB)"
+CPQ9990 "Compaq 386/33 System Processor Board used as Primary"
+CPQ9991 "Compaq 386/33 Desktop Processor Board"
+CPQ9999 "Compaq 486/33 System Processor Board used as Primary"
+CPQ999A "Compaq 486/33 Desktop Processor Board"
+CPQA000 "Compaq Enhanced Option Slot Serial Board"
+CPQA010 "Compaq Enhanced Option Slot Modem Board"
+CPQA020 "Compaq Integrated CD Rom Adapter"
+CPQA030 "Compaq Integrated CD Rom Adapter"
+CPQF000 "Compaq Fixed Disk Drive Feature"
+CPQF100 "Compaq Ethernet 16TP Controller"
+CPQFA0D "Compaq SYSTEMPRO 4-Socket System Memory Board"
+CPQFA0E "Compaq SYSTEMPRO 6-Socket System Memory Board"
+CPQFA0F "Compaq DESKPRO 486/25 System Memory Board"
+CPQFA1A "Compaq DESKPRO 3-Socket System Memory Board"
+CPQFA1B "Compaq DESKPRO 486/50 System Memory Board"
+CPQFA1C "Compaq System Memory Expansion Board"
+CPQFA1D "Compaq SYSTEMPRO/XL Memory Expansion Board"
+CPQFB03 "Compaq Async/Parallel Printer Intf Assy 000990"
+CPQFB07 "Compaq DESKPRO 2400 Baud Modem"
+CPQFC0B "Compaq Advanced Graphics 1024 Board"
+CPQFD08 "Compaq 135Mb, 150/250Mb Tape Adapter"
+CPQFD13 "Compaq 15MHz ESDI Fixed Disk Controller 001283"
+CPQFD17 "Compaq SCSI Tape Adapter"
+CPX0301 "Universal 10/100VG Selectable EISA LAN Adapter"
+CRS3203 "Crescendo 320 FDDI/CDDI EISA Adapter"
+CRS3204 "Cisco CDDI/FDDI EISA Adapter"
+CSI0690 "CSI F70X9 EISA FDDI DNI adapter card"
+CUI0000 "CUI Examples -- Virtual Board"
+DBI0101 "Digi C/X Host Adapter - EISA"
+DBI0102 "Digi C/X Host Adapter - EISA"
+DBI0201 "Digi EISA/Xem Host Adapter"
+DBI0301 "Digi EPC/X Host Adapter - EISA"
+DBI0501 "Digi Ports/Xem Host Adapter - ISA"
+DBI0601 "Digi EPC/X Host Adapter - ISA"
+DBI0701 "Digi C/X Host Adapter - ISA"
+DBI0801 "Digi PC/Xr - ISA"
+DBI0901 "Digi PC/Xt - ISA"
+DBI0C01 "Digi DataFire - ISA"
+DBI0D01 "Digi DataFire/4 - ISA"
+DBI0E01 "Digi PC IMAC - ISA"
+DBI0F01 "Digi PC IMAC/4 - ISA"
+DBI1001 "Digi PC/Xe - ISA"
+DBI1101 "Digi ES/4 Host Adapter - EISA"
+DBI1201 "Digi Acceleport Xr 920 - ISA"
+DEC1011 "Digital EISA Video Controller (EVC-1)"
+DEC1021 "Digital EISA SCSI Controller (ESC-1)"
+DEC1031 "DECpc MTE Series System Board"
+DEC2030 "Digital Ethernet Controller (DE203)"
+DEC2040 "Digital Ethernet Controller (DE204)"
+DEC2050 "Digital Ethernet Controller (DE205)"
+DEC2400 "DECpc AXP/150 System Board"
+DEC2500 "DEC EISA NVRAM for Alpha AXP"
+DEC2A01 "Digital AlphaServer 2100 Family System Board"
+DEC2E00 "Digital KFESA DSSI EISA Host Adapter"
+DEC2F00 "Digital WANcontroller/EISA (DNSES)"
+DEC3001 "DEC FDDIcontroller/EISA Adapter"
+DEC3002 "DEC FDDIcontroller/EISA Adapter"
+DEC3003 "DEC FDDIcontroller/EISA Adapter"
+DEC3004 "DEC FDDI Controller"
+DEC4220 "Digital EISA Ethernet Controller (DE422-SA)"
+DEC4250 "Digital EtherWORKS Turbo EISA (DE425-AA)"
+DEC5000 "Digital AlphaServer 1000, 1000A and AlphaStation 600A System Board"
+DEC5100 "Digital AlphaStation 600 Family System Board"
+DEC5301 "Digital 800 AlphaServer Family System Board"
+DEC6000 "Digital AlphaServer 8200 and 8400 Family System Board"
+DEC6400 "Digital AlphaServer 4100 System Board"
+DEC8101 "DEC VGA 1024 Graphics Adapter"
+DEC8102 "DEC 8514/A-Compatible Graphics Adapter"
+DEC8103 "DECpc VGA 1024 NI Graphics Adapter"
+DEC8300 "DEC DEPCA LC Ethernet Controller"
+DEC8301 "DEC DEPCA TURBO Ethernet Controller"
+DEL0000 "Generic ISA Board"
+DEL0001 "Dell System(R) 425E(TM) System Board"
+DEL0002 "Dell System(R) 433E(TM) System Board"
+DEL0003 "Dell System(R) 425TE(TM) System Board"
+DEL0004 "Dell System(R) 433TE(TM) System Board"
+DEL0005 "Dell Powerline(TM) Workstation 433DE(TM) System Board"
+DEL0006 "Dell Powerline(TM) Workstation 420DE(TM) System Board"
+DEL0007 "Dell Powerline(TM) Workstation 450DE(TM) System Board"
+DEL0008 "Dell Powerline(TM) Server 433SE(TM) System Board"
+DEL0009 "Dell Powerline(TM) Server 420SE(TM) System Board"
+DEL000A "Dell Powerline(TM) Server 450SE(TM) System Board"
+DEL000B "Dell PowerLine(TM) Workstation 425DE(TM) System Board"
+DEL000C "Dell PowerLine(TM) Server 425SE(TM) System Board"
+DEL0011 "Dell Powerline(TM) Server 450SE/2(TM) System Board"
+DEL0019 "Dell Powerline(TM) Server 466SE(TM) System Board"
+DEL0021 "Dell Powerline(TM) Workstation 450DE/2(TM) System Board"
+DEL0029 "Dell Powerline(TM) Workstation 466DE(TM) System Board"
+DEL002A "Dell Powerline(TM) Workstation P60/DE(TM) System Board"
+DEL002B "Dell Powerline(TM) Workstation P66/DE(TM) System Board"
+DEL002C "Dell Powerline(TM) Workstation P60/SE(TM) System Board"
+DEL002D "Dell Powerline(TM) Workstation P66/SE(TM) System Board"
+DEL0031 "Dell 486/ME System Board"
+DEL0036 "Dell 406x/XE System Board"
+DEL0038 "Dell 456x/XE System Board"
+DEL0054 "Dell System PowerEdge 2100"
+DEL0058 "Dell System PowerEdge 4100"
+DEL005A "Dell System PowerEdge 2200"
+DEL005C "Dell System PowerEdge 4200"
+DEL2100 "Dell Remote Server Assistant Card"
+DEL4001 "Dell Drive Array"
+DEL4002 "Dell SCSI Array Controller"
+DEL6001 "Dell DGX Video Subsystem"
+DELFC00 "Dell GPX-1024 Graphics Performance Accelerator"
+DELFC01 "Dell VGA Professional 16-bit"
+DELFC02 "Paradise Hi-Res Graphics Adapter"
+DELFC03 "Paradise Hi-Res Graphics Card"
+DELFD00 "UltraStor 12F/12F-24 ESDI/Diskette Cntrl"
+DELFD02 "Archive XL Tape Host Adapter"
+DELFD03 "Wangtek Tape Host Adapter"
+DELFD05 "Adaptec AHA-1510 ISA SCSI Host Adapter"
+DIS0000 "NETSERVER LH PRO - DISABLE SCSI B - FOR TEST & EVALUATION ONLY"
+DPT2402 "DPT SCSI Host Bus Adapter (PM2012A/9X)"
+DPT2403 "DPT SCSI Host Bus Adapter (PM2012A/90)"
+DPTA401 "DPT SCSI Host Bus Adapter (PM2012B/9X)"
+DPTA402 "DPT SCSI Host Bus Adapter (PM2012B2/9X) - Banyan Vines"
+DPTA410 "DPT SCSI Host Bus Adapter (PM2X22A/9X)"
+DPTA501 "DPT SCSI Host Bus Adapter (PM2012B1/9X)"
+DPTA502 "DPT SCSI Host Bus Adapter (PM2012B2/9X)"
+DPTA701 "DPT SCSI Host Bus Adapter (PM2011B1/9X)"
+DPTBC01 "DPT ESDI Caching Hard Disk Controller (PM3011/7X)"
+DTC1101 "DTC2290 EISA IDE Controller"
+DTC3101 "DTC3290 Host Adapter"
+DTI0000 "Evolution RISC PC"
+DTI2000 "DTI ESP2000A/ESP2000 EISA System Processor Board"
+DTI2002 "DTI ESP2002 Integrated EISA System Processor"
+DTK0001 "DTK PLM-3300I 80486 EISA Board"
+DTK0003 "DTK PLM-3331P EISACACHE486 33/25/50 MHZ"
+ECS0580 "DI-580A EISA SCSI Host Adapter"
+ECS0590 "DI-590 EISA SCSI Cache Host Adapter"
+ELS8041 "ELSA  WINNER 1000  Enhanced VGA"
+ETI1001 "NE3300 Ethernet Rev. C & D"
+EVX0002 "PN-3000 System Board"
+FCT0001 "EISA SYSTEM BOARD"
+FCT0002 "386 EISA SYSTEM BOARD"
+FCT0003 "486 EISA SYSTEM BOARD"
+FIC0000 "LEO 486VE EISA Main Board"
+FIX1516 "15-16MB Memory Hole Patch - Netserver LF/LC 5/66"
+FSI2001 "ESA-200 ATM"
+FSI2002 "ESA-200A ATM"
+FSI2003 "ESA-200E ATM"
+GDT2001 "GDT2000/GDT2020 Fast-SCSI Cache Controller - Rev. 1.0"
+GDT3001 "GDT3000/GDT3020 Dual Channel SCSI Controller - Rev. 1.0"
+GDT3002 "GDT30x0A Cache Controller"
+GDT3003 "GDT3000B/GDT3010A EISA SCSI Cache Controller - Rev. 1.0"
+GIT0000 "G486PEL EISA & LOCAL Bus Mother Board."
+GIT0001 "G486HVL EISA & VESA LOCAL Bus Mother Board."
+HCL0801 "HCL-Hewlett Packard Limited PANTHER System Board"
+HIT0001 "MCC Mini-EISA486 Board"
+HKG0011 "Distributed Signal Conditioning Front-End"
+HMS0000 "HMSI ESIC EVALUATION BOARD"
+HWP0000 "HP Monochrome Plus Video Board (35732A)"
+HWP0010 "HP Multimode Video Adapter (45981A)"
+HWP0020 "HP Multimode Color Adapter Board (45984A)"
+HWP0030 "HP Enhanced Graphics Adapter Board (45983A)"
+HWP0070 "HP Intelligent Graphics Controller 20 (A1083A)"
+HWP0C70 "HP-IB Host Adapter"
+HWP0C80 "SCSI Host Adapter (Cirrus-II) -- 25525A"
+HWP1400 "HP Dual Serial Interface Board (24541B)"
+HWP1410 "HP Internal 2400 Baud Modem (24551A)"
+HWP1420 "HP Internal 1200 Baud Modem (24550A)"
+HWP1440 "HP Terminal Multiplexor Board (D2040A)"
+HWP1450 "HP HP-IB Interface board (82335A)"
+HWP1460 "HP ScanJet Plus Interface (88290A)"
+HWP1461 "HP ScanJet Plus Interface (88290A)"
+HWP1801 "HP StarLAN 10 PC Link II (27240A)"
+HWP1810 "HP ThinLAN Interface Board (27210B)"
+HWP1811 "HP ThinLAN PC Adapter Card (27250A)"
+HWP1820 "HP EtherTwist Adapter Card/8 (27245-60002)"
+HWP1832 "HP EtherTwist PC LAN Adapter/16 TP Plus (27247B)"
+HWP1840 "HP EtherTwist EISA LAN Adapter/32"
+HWP1850 "LAN AdapterCard -- 25567A"
+HWP18A0 "HP EtherTwist PC LAN Adapter/16 TL Plus (27252A)"
+HWP18C0 "HP EtherTwist PC LAN Adapter NC/16 TP (J2405A)"
+HWP18E0 "HP 100Mbps EISA ATM Card"
+HWP1940 "HP 10/100VG Selectable EISA LAN Adapter (J2577A)"
+HWP1980 "ATM Adapter -- J2802A"
+HWP1990 "Hewlett-Packard EISA 100VG AnyLAN adapter card"
+HWP1C00 "HP Serial/Parallel Interface Board (24540B)"
+HWP2002 "HP ScanJet II Interface (C1752A)"
+HWP2051 "EISA Test Adapter Card"
+HWP2080 "HP ScanJet II Interface (C2502A)"
+HWPC000 "Series 700 EISA System Board"
+HWPC010 "Series 700 EISA System Board"
+HWPC051 "Series 700 EISA System Board"
+HWPC091 "EISA System Board"
+HWPC0D1 "EISA System Board"
+HWPC0E1 "EISA System Board"
+IBM0001 "IBM Auto 16/4 Token Ring ISA Adapter"
+IBM1000 "IBM 16/4 Busmaster EISA Adapter"
+IBM1060 "IBM 100/10 ISA Ethernet Adapter"
+IBM1061 "IBM 100/10 ISA Ethernet Adapter"
+ICLA080 "ICL EtherTeam 32 EISA 32-bit Ethernet Controller"
+ICU0010 "Intel SatisFAXtion Modem/400"
+ICU0020 "Intel SatisFAXtion Modem/100"
+ICU0030 "DigiBoard DigiChannel PC/4E Serial Adapter"
+ICU0040 "Western Digital WD1003V-MM2(WITH FIRMWARE) Hard/Floppy Disk Controller"
+ICU0041 "Western Digital WD1003V-MM2(WITHOUT FIRMWARE) Hard/Floppy Disk Controller"
+ICU0050 "Western Digital WD1007A-WA2(WITH BIOS) Hard/Floppy Disk Controller"
+ICU0051 "Western Digital WD1007A-WA2(WITHOUT BIOS) Hard/Floppy Disk Controller"
+ICU0052 "Western Digital WD1007V-SE2 Hard/Floppy Disk Controller"
+ICU0060 "Archive SC402/VP402 QIC-02 Tape Controller"
+ICU0070 "Wangtek PC-36 Tape Controller"
+ICU0080 "Wangtek PC-02 Tape Controller"
+ICU0091 "Adaptec 1542B SCSI/Floppy Disk Controller"
+ICU0092 "Adaptec 1542C SCSI/Floppy Disk Controller"
+ICU00A0 "DPT PM2011B1/9X SCSI Controller"
+ICU00B0 "3COM Etherlink II (3C503) Network Adapter"
+ICU00C0 "3COM Etherlink 16 (3C507) Network Adapter"
+ICU00D0 "SMC PC600WS Network Adapter"
+ICU00E0 "SMC PC130E Network Adapter"
+ICU00F0 "Novell NE2000 Network Adapter"
+ICU0100 "Western Digital WD8003E Network Adapter"
+ICU0110 "Paradise VGA Plus 16 Video Adapter "
+ICU0120 "Paradise VGA 1024 Video Adapter "
+ICU0130 "Orchid Prodesigner IIs Video Adapter"
+ICU0140 "ATI Graphics Ultra Pro Video Adapter"
+ICU0150 "Orchid Fahrenheit 1280 Video Adapter "
+ICU0160 "ATI VGA Wonder XL24 Video Adapter"
+ICU0170 "ATI Graphics Ultra Video Adapter"
+ICU0180 "Sound Blaster Multi-Media Adapter"
+ICU0190 "Sound Blaster Pro Multi-Media Adapter"
+ICU01A0 "Sound Blaster 16ASP Multi-Media Adapter"
+ICU01B0 "Gravis Ultra Sound Multi-Media Adapter"
+ICU01C0 "Logitech Soundman 16 Multi-Media Adapter"
+ICU01D0 "Media Vision Thunderboard Multi-Media Adapter"
+ICU01E0 "Pro Audio Spectrum 16 Multi-Media Adapter"
+ICU01F0 "Microsoft Windows Sound System Multi-Media Adapter"
+ICU0200 "Intel Above Board Plus 8 I/O"
+ICU0210 "Logitech Bus Mouse"
+ICU0220 "Microfield Graphics V8 Video Controller"
+ICU0230 "Accton Ringpair-4/16 (TR1605)"
+ICU0240 "CNet CN600E/680E"
+ICU0250 "CNet CN1000T"
+ICU0260 "CNet CN850E"
+ICU0270 "CNet CN800E/880E"
+ICU0280 "Cogent E/Master II-AT"
+ICU0290 "Cogent E/Master I-AT"
+ICU02A0 "D-Link DE-100"
+ICU02B0 "D-Link DE-200"
+ICU02C0 "Eagle/Novell NE1000 (810-160-00X)"
+ICU02C1 "Eagle/Novell NE1000 (950-054401)"
+ICU02D0 "Eagle/Novell NE1500T"
+ICU02E0 "Eagle/Novell NE2100"
+ICU02F0 "Gateway Ethertwist 16 (Fujitsu Chipset)"
+ICU02F1 "Gateway Ethertwist 16 (National Chipset)"
+ICU0300 "Gateway Ethertwist PC/PC-WS(National Chipset)"
+ICU0310 "Proteon ProNET-4/16 Model p1390"
+ICU0320 "Racal-Datacom InterLan AT"
+ICU0330 "SMC PC330"
+ICU0340 "SMC PC500"
+ICU0350 "SMC PC550"
+ICU0360 "SMC PC650"
+ICU0370 "SMC PC270E"
+ICU0380 "SMC 3008"
+ICU0390 "SMC 3016"
+ICU03A0 "Thomas-Conrad TC5045-2"
+ICU03B0 "Thomas-Conrad TC6042/TC6142/TC6242"
+ICU03C0 "Thomas-Conrad TC6045"
+ICU03D0 "Thomas-Conrad TC6245"
+ICU03E0 "Tiara Lancard 2002/2003"
+ICU03F0 "Tiara Lancard AT"
+ICU0400 "Tiara Lancard PC"
+ICU0410 "Tiara ARCNET Lancard AT"
+ICU0420 "Tiara Ethernet Lancard * 2000"
+ICU0430 "Tiara Ethernet Lancard E2000"
+ICU0440 "Tiara Lancard A-286"
+ICU0450 "Tiara Lancard E"
+ICU0460 "Tiara Lancard E * AT"
+ICU0470 "Tiara Lancard E * AT TP"
+ICU0480 "Tiara Lancard E * PC"
+ICU0490 "Tiara Lancard E * PC10BT"
+ICU04A0 "Tiara Lancard E * PC10TP"
+ICU04B0 "Tiara Token Ring Lancard*16 AT"
+ICU04C0 "Zenith LAN10E-MAT/FAT/FL-AT"
+ICU04D0 "Zenith LAN16TR-AT"
+ICU04E0 "Zenith LAN16TR-XT"
+ICU04F0 "Zenith LAN4TR-AT"
+ICU0500 "Zenith LAN4TR-XT"
+ICU0510 "Zenith OfficeNIC"
+ICU0520 "Zenith XT Lancard"
+ICU0530 "BOCA M1440I 14.4Kbps V.32bis Modem"
+ICU0540 "Always Technology IN-2000 SCSI Controller"
+ICU0550 "Data Technology DTC3180A/DTC3280A SCSI Controller"
+ICU0560 "DTC3150 SCSI Controller"
+ICU0561 "DTC3150B SCSI Controller"
+ICU0570 "Data Technology DTC3250 SCSI Controller"
+ICU0580 "TMC-850M/TMC-850RL SCSI Controller"
+ICU0590 "Future Domain TMC-880/TMC-881 SCSI Controller"
+ICU05A0 "Future Domain TMC-1650/1660/1670/1680 SCSI Controller V5"
+ICU05B0 "Future Domain TMC-1650/1660/1670/1680 SCSI Controller V4"
+ICU05C0 "Promise Technology DC-2030 IDE Controller"
+ICU05D0 "Promise Technology DC-2031 IDE Controller"
+ICU05E0 "Promise Technology DC-2040 SCSI Controller"
+ICU05F0 "Ultrastor ULTRA14F SCSI Controller"
+ICU0600 "Ultrastor ULTRA12C/12F ESDI Controller"
+ICU0610 "Ultrastor ULTRA15C IDE Controller"
+ICU0620 "Longshine LCS-6624/6624G IDE Controller"
+ICU0630 "Longshine LCS-6631/6631F SCSI Controller"
+ICU0640 "Intel EtherExpress TPE Hub Controller"
+ICU0650 "US Robotics Sportster 9600/PC Modem w/V.42BIS"
+ICU0660 "Zoom AFC FAX Modem"
+ICU0680 "DFI DIO-500 Serial/Parallel I/O Card"
+ICU0681 "DFI DIO-200 Serial/Parallel I/O Card"
+ICU0690 "Practical Peripherals PM9600FX Modem/FAX"
+ICU06A0 "Practical Peripherals PM2400 Modem"
+ICU06B0 "Zoom VFP V.32bis FAX Modem"
+ICU06C0 "Zoom VP V.32bis Modem"
+ICU06D0 "Zoom AMC 2400 Modem"
+ICU06E0 "Cardinal MVP96IF 9600 Baud FAX/Modem"
+ICU06F0 "Cardinal MB2296SR 9600 Baud FAX/Modem"
+ICU0700 "Hayes Accura 2400B Modem"
+ICU0710 "US Robotics Sportster 2400/PC Modem"
+ICU0720 "US Robotics Sportster 14,400/PC FAX/Modem"
+ICU0730 "Intel SatisFAXtion Modem/200"
+ICU0740 "Racal InterLan NI5210-10BT"
+ICU0750 "Racal InterLan NI6510-UTP"
+ICU0760 "Intel Smart Video Recorder"
+ICU0770 "Diamond Stealth Pro Accelerator"
+ICU0780 "Diamond SpeedStar 24X VGA adapter"
+ICU0790 "Video Seven WIN.PRO card"
+ICU0800 "Video Seven WIN.VGA card"
+ICU0810 "BOCA Super X Accelerator VGA"
+ICU0820 "Metheus Premier 928"
+ICU0830 "GraphicsENGINE ULTRA Series"
+ICU0840 "Cardinal VIDEO spectrum"
+ICU0850 "SigmaDegins Legend 24LX"
+ICU0860 "Hercules Graphite Card"
+ICU0870 "Focus GUIVGA"
+ICU0880 "AIR AVIEW2V SVGA"
+ICU0890 "NDI Volante Warp Series Warp10"
+ICU0900 "NDI Volante Warp Series Warp10LB and 24LB"
+ICU0910 "Cyber Audio Multi-Media Adapter"
+ICU0920 "Genoa SuperVGA 6000 Series"
+ICU0930 "Acculogic sIDE-1"
+ICU0940 "Acculogic sIDE-1/16"
+ICU0950 "Acculogic sIDE-3/plus"
+ICU0960 "Alpha Research S4251 ISA"
+ICU0970 "CMS Enhancement Universal AT/XT Controller"
+ICU0980 "Eastern IDC-747"
+ICU0990 "Juko D16-X"
+ICU1000 "NCL538/NCL539"
+ICU1010 "NCL538B"
+ICU1020 "NCL538C"
+ICU1030 "easyCACHE IDE/easyCACHEPro IDE"
+ICU1040 "Plus Development HARDCARD II XL"
+ICU1050 "Plus Development HARDCARD II"
+ICU1060 "Seagate ST05A"
+ICU1070 "Seagate ST05X"
+ICU1080 "Silicon ADP60"
+ICU1090 "Silicon ADP65"
+ICU1100 "HP ISA SCSI Host Adapter (D1682A)"
+ICU1101 "HP SCSI-1 Host Adapter for HP CD-ROM (D2886A)"
+ICU1110 "Adaptec AHA-1540A/AHA-1542A"
+ICU1120 "Bustek BT-542B"
+ICU1130 "Bustek BT-542S/BT-542D"
+ICU1140 "Computer Electronik Infosys C5610"
+ICU1150 "Computer Electronik Infosys C5630"
+ICU1160 "Computer Electronik Infosys C5635"
+ICU1170 "Control Concepts HB A8"
+ICU1180 "DPT PM2001B/90,PM2001B/95"
+ICU1190 "Quantum ISA-200S"
+ICU1200 "easyCACHE SCSI/easyCACHEPro SCSI"
+ICU1210 "Procom CC-8 SCSI ENABLER"
+ICU1220 "Procom CC-16 SCSI ENABLER"
+ICU1230 "Procomp S-DCB"
+ICU1240 "Procomp USA, Incoprated S-DCB"
+ICU1250 "Rancho RT10-AT"
+ICU1260 "SMS OMTI-810/812/820/822"
+ICU1270 "SMC 4004-PC"
+ICU1280 "Sumo SPI 200"
+ICU1290 "Trantor T100"
+ICU1300 "IBM Token-Ring 16/4 Adapter"
+ICU1310 "Thomas TC-4045"
+ICU1330 "DPT PM2011/95 SCSI Controller"
+ICU1340 "DPT PM2021 SamrtCacheIII Adapter"
+INP0010 "Barracuda E/4810"
+ICU1360 "SyQuest SQ08  IDE  Controller"
+ICU1370 "SyQuest ST01 SCSI HOST Adapter"
+IDS0100 "EISC960 EISA Caching SCSI Host Adapter"
+IIN0B01 "Intel TokenExpress(tm) ISA/8 Network Adapter"
+IKN1110 "IKON hardcopy boards: 10092, 10097, or 10111"
+IMS1001 "Integrated Micro Solution Inc. 486 EISA System Board"
+ING2040 "HCL-Hewlett Packard Limited PANTHER System Board"
+INP25D0 "Seahawk 4811 FDDI Controller"
+INP5000 "Interphase 4800 EISA->PCI Bridge"
+INT0000 "Mercury/Neptune PCI-EISA Main Board"
+INT0081 "HCL-Hewlett Packard Limited PANTHER System Board"
+INT0701 "Intel TokenExpress(tm) ISA 16/4 Network Adapter"
+INT0703 "Intel TokenExpress(tm) ISA/16s Network Adapter"
+INT0902 "Intel TokenExpress(tm) EISA 16/4 Network Adapter"
+INT0B01 "Intel TokenExpress(tm) ISA/8 Network Adapter"
+INT1000 "Intel EtherExpress 16 Family LAN Adapter"
+INT1010 "Intel EtherExpress(tm) Flash32 Ethernet Adapter"
+INT1030 "Intel EtherExpress(TM) PRO/10 LAN Adapter"
+INT1031 "Intel EtherExpress(TM) PRO/10+ LAN Adapter"
+INT1060 "Intel EtherExpress(tm) PRO/100 LAN Adapter"
+INT1201 "Intel TokenExpress(tm) EISA/32 Network Adapter"
+INT3061 "LP486E System Board"
+INT3079 "X-Series Desktop System Board"
+INT3089 "X-Series Deskside System Board"
+INT30A1 "L486 Series System Board"
+INT30A9 "L486 Series System Board"
+INT30D1 "X-Series System Board"
+INT30F1 "X-Series Premium System Board"
+INT3132 "ECC Memory Module (BXECCMEM0)"
+INT31A0 "System Board"
+ISA0000 "Generic ISA Adapter"
+ISA0001 "Generic Video Card"
+ISA1000 "Serial/Parallel Adapter Board"
+ISA1010 "Generic OSF ISA COM/MODEM/LPT"
+ISA2000 "Microsoft Sound Board ISA Adapter Definition"
+ISA3000 "ISA-PCMCIA Adapter"
+ISA4000 "Dialogic Voice Card Adapter"
+ISA4010 "Dialogic DTI/2xx, DMX, MSI/C Adapter"
+ISA4020 "GammaLink Fax Card Adapter Definitions"
+ISA4030 "Dialogic Antares Card Definitions"
+ISA6400 "ISA ATI MACH64 VGA controller"
+ISA8100 "Attachmate 3270 COAX Adapter (Long Board)"
+ISA8101 "Attachmate Advanced 3270 COAX Adapter (Short Board)"
+ISA8102 "Attachmate SDLC/Autolink Adapter"
+ISA8103 "Attachmate SDLC Adapter"
+ISA8200 "AST 3270/COAX II Rev. X4"
+ISA8201 "AST 5251/11 Enhanced Plus"
+ISA8202 "AST SixPakPlus Version A"
+ISA8203 "AST Rampage 286"
+ISA8204 "AST RAMvantage"
+ISA8300 "IBM Enhanced 5250 Emulator"
+ISA8301 "IBM Enhanced 5250 Emulator Rev B"
+ISA8302 "IBM SDLC (3270 or 5250 Remote)"
+ISA8303 "IBM Advanced 3278/79 Adapter"
+ISA8304 "IBM Serial/Parallel Adapter"
+ISA8305 "IBM PC Network"
+ISA8306 "IBM TOKEN RING Adapter I"
+ISA8307 "IBM TOKEN RING Adapter II"
+ISA8308 "IBM Monochrome Adapter"
+ISA8309 "IBM VGA Display Adapter"
+ISA830A "IBM Token Ring II Short Adapter"
+ISA830B "IBM Token Ring 16/4 Adapter"
+ISA830C "IBM Enhanced Graphics Adapter"
+ISA830D "IBM PGA"
+ISA830E "IBM Realtime Interface Co-Processor Multiport Adapter, Model 2"
+ISA8400 "IDEAssociates IDEAcomm 5250/Remote"
+ISA8401 "IDEAssociates IDEAcomm 5251 Twinax Plus Rev D"
+ISA8402 "IDEAssociates IDEAcomm 5251 Twinax Plus Rev C"
+ISA8403 "IDEAssociates IDEAcomm 5251 Twinax Rev A,B,C"
+ISA8500 "DCA IRMA2 Adapter"
+ISA8501 "DCA IRMA 3278 Emulation"
+ISA8502 "DCA IRMA 3279 Graphics Adapter"
+ISA8503 "DCA IRMA3 Convertible"
+ISA8505 "DCA Smart Alec 5250"
+ISA8506 "DCA IRMA Remote SDLC Adapter"
+ISA8507 "DCA 10-NET Adapter"
+ISA8508 "DCA IRMA2 3279 Graphics Adapter"
+ISA8509 "DCA Intelligent Serial PC Adapter (Long SDLC)"
+ISA8700 "Novell Coax Adapter 3270 Connection"
+ISA8701 "Novell COAX GRAPHICS Rev. A"
+ISA8702 "Novell TWINAX 5250"
+ISA8711 "Novell NE1000 Ethernet Adapter"
+ISA8712 "Novell NE2000 Ethernet Adapter"
+ISA8713 "Novell RX-Net REV B,C,D NIC"
+ISA8714 "Novell RX-Net REV E,F,G NIC"
+ISA8804 "Tecmar EGA Master 480/800"
+ISA8805 "Tecmar Maestro AT"
+ISA8900 "SMC ARCNET PC"
+ISA8901 "SMC ARCNET PC100"
+ISA8902 "SMC ARCNET PC110"
+ISA8903 "SMC Arcnet PC130/E"
+ISA8904 "SMC Arcnet PC220/120"
+ISA8905 "SMC Arcnet PC270/E"
+ISA8906 "SMC Arcnet PC500"
+ISA8907 "SMC Ethernet PC510"
+ISA8A00 "NESTAR ARCNET PLAN 2000"
+ISA8B00 "DEC DEPCA EtherLink Adapter, Rev D1"
+ISA8B01 "DEC DEPCA EtherLink Adapter, Rev E or F"
+ISA8C00 "3COM 3C505-2012 EtherLink Plus 16bit Mode"
+ISA8C01 "3COM EtherLink 3C501 ASM 1221"
+ISA8C02 "3COM EtherLink 3C500B ASM 34-0780"
+ISA8C03 "3COM 3C503 EtherLink II"
+ISA8C04 "3COM 3C603 Tokenlink 16bit"
+ISA8C05 "3COM 3C605-2065 Tokenlink Plus 8bit"
+ISA8C06 "3COM 3C505-2012 EtherLink Plus 8bit Mode"
+ISA8C07 "3COM 3C605-2065 Tokenlink Plus 16bit Mode"
+ISA8C08 "3COM 3C603 Tokenlink 8bit Mode"
+ISA8C09 "3COM 3C507 Etherlink 16"
+ISA8C10 "3COM 3C507TP Etherlink 16"
+ISA8D00 "Tiara LANCARD/A REV B"
+ISA8D01 "Tiara LANCard/E * PC 16"
+ISA8E00 "Microsoft Mouse Controller"
+ISA8E01 "Scanman Plus by Logitech"
+ISA8F00 "AT&T STARLAN Network Adapter"
+ISA8F01 "AT&T Truevision Image Capture Board"
+ISA9000 "Hercules GB222 InColor Card"
+ISA9001 "Hercules Graphics Card Plus"
+ISA9002 "Hercules VGA Card"
+ISA9100 "Quadram QuadEGA+"
+ISA9101 "Quadram QuadVGA Video Adapter"
+ISA9102 "Quadram QUADMEG-AT"
+ISA9103 "QUADEMS+ W/IO"
+ISA9200 "Intel Above Board/AT (no Piggyback)"
+ISA9201 "Intel Above Board/AT With 2MB Piggyback"
+ISA9202 "Intel Above Board 286 (no Piggyback)"
+ISA9203 "Intel Above Board 286 With 2MB Piggyback"
+ISA9204 "Intel Above Board PS/286 (no Piggyback)"
+ISA9205 "Intel Above Board PS/286 With 2MB Piggyback"
+ISA9206 "Intel Above Board Plus 8 (including 6Mb Piggyback)"
+ISA9207 "Intel Visual Edge printing enhancement system"
+ISA9208 "Intel iMX-LAN/586"
+ISA9209 "Intel PC586E"
+ISA9300 "MICOM-Interlan NP600A Ethernet 16bit"
+ISA9302 "MICOM-Interlan NI5210/8 Ethernet"
+ISA9303 "MICOM-Interlan NI5210/16 Ethernet"
+ISA9400 "Gateway G/Ethernet AT"
+ISA9401 "Gateway G/Ethernet 8-bit PC"
+ISA9402 "Gateway G/Token Ring 8-bit "
+ISA9403 "Gateway G/Token Ring AT "
+ISA9404 "Gateway G/Net VS "
+ISA9405 "Gateway G/Net LNIM"
+ISA9500 "Proteon ProNET-4/AT P1344"
+ISA9600 "Madge AT Ring Node"
+ISA9601 "Smart ISA Ringnode"
+ISA9700 "IMC PCnic 16bit NIC"
+ISA9800 "Video Seven V-RAM VGA"
+ISA9801 "Video Seven Vega Deluxe EGA Adapter"
+ISA9802 "Video Seven FastWrite VGA Video Adapter"
+ISA9803 "Video Seven VGA 1024i Video Adapter"
+ISA9900 "Sigma Designs VGA-PC-HP160/162"
+ISA9901 "Sigma Designs SigmaVGA or VGA/HP8"
+ISA9A00 "Verticom M16/M256E"
+ISA9A01 "Verticom MX16/AT & MX256/AT"
+ISA9B00 "HP 82328A Intelligent Graphics Controller"
+ISA9C01 "Matrox PG-1281"
+ISA9C02 "Matrox PG-1024"
+ISA9C03 "Matrox PG-641"
+ISA9D00 "Renaissance GRX Rendition I"
+ISA9D01 "Rendition II Intelligent Graphics Controller"
+ISA9E00 "Pixelworks Micro Clipper Graphics"
+ISA9E01 "Pixelworks Ultra Clipper Graphics"
+ISA9F00 "Genoa Super VGA 16-Bit"
+ISA9F02 "Genoa SuperVGA"
+ISA9F03 "Genoa SuperEGA HiRes+"
+ISA9F04 "Genoa SuperSpectrum Model 4650"
+ISA9F05 "Genoa SuperSpectrum Model 4640"
+ISA9F07 "Genoa Systems QIC-02 Tape Controller"
+ISAA000 "Vermont Page Manager 100"
+ISAA100 "Orchid TurboPGA"
+ISAA101 "Orchid ProDesigner VGA/VGA+"
+ISAA102 "Orchid Enhanced Board OM"
+ISAA103 "Orchid Enhanced Board w/IO"
+ISAA200 "Paradise VGA Professional 16-bit"
+ISAA201 "Paradise VGA Plus 8-bit"
+ISAA202 "Paradise Autoswitch EGA"
+ISAA300 "Truevision ATVista ICB"
+ISAA400 "Excelan EXOS 205E"
+ISAA401 "Excelan EXOS 205T 16-Bit"
+ISAA500 "Pure Data PDI8025 Token Ring"
+ISAA501 "Pure Data PDI508 ArcNet"
+ISAA600 "BICC ISOLAN Ethernet"
+ISAA700 "Control Systems Artist 10"
+ISAA701 "Control Systems Artist XJ10"
+ISAA800 "Codenoll Codenet3051"
+ISAAB00 "Hayes Smartmodem 1200B"
+ISAAB01 "Hayes Smartmodem"
+ISAAB02 "Hayes Smartmodem 2400B"
+ISAAB03 "Hayes Smartmodem 2400Q"
+ISAAC00 "ATI Tech. Inc. EGA WONDER"
+ISAAC01 "ATI Tech. Inc. VGA WONDER"
+ISAAD00 "TOPS FlashCard"
+ISAAE01 "Arnet SMARTPORT Card"
+ISAAE02 "Arnet MODULAR SMARTPORT Card"
+ISAAE03 "Arnet SMARTPORT 16 Card"
+ISAAF00 "Computone INTELLIPORT Multiport Serial Card"
+ISAAF01 "Computone IntelliPort ATCC Cluster Controller"
+ISAB000 "Anvil Designs Stallion Intelligent I/O Controller"
+ISAB100 "Emerald 3XTwin 5250 Twinax"
+ISAB101 "Emerald 3XPlus 5250 Remote"
+ISAB200 "EVEREX Evercom 24 2400 baud modem"
+ISAB300 "Practical Modem 2400"
+ISAB401 "STB Systems EGA Plus"
+ISAB402 "STB Chauffeur HT"
+ISAB403 "STB VGA Extra"
+ISAB404 "STB EGA MultiRes"
+ISAB500 "Banyan Intelligent Communications Adapter"
+ISAB600 "Computer Peripherals Monographic Video"
+ISAB601 "Computer Peripherals VisionMaster VGA"
+ISAB602 "Graphmaster Plus EGA Video Adapter"
+ISAB700 "Iomega Bernoulli PC3B/50 Board"
+ISAB701 "Iomega Bernoulli PC2/50, PC2B/50 Boards"
+ISAB702 "Iomega Bernoulli II Combo Adapter Board"
+ISAB800 "Archive SC499R Tape Controller"
+ISAB801 "Archive VP402 Tape Adapter"
+ISAB900 "DigiBoard DigiCHANNEL PC/Xe"
+ISAB901 "DigiBoard DigiCHANNEL PC/8i"
+ISAB903 "Digiboard Digichannel PC/8e"
+ISAB904 "DigiBoard Com/8s"
+ISAB905 "DigiBoard DigiCHANNEL PC/8"
+ISABA00 "Alloy IMP2 Multiuser Port Controller"
+ISABA01 "Alloy IMP8 Multiuser Port Controller"
+ISABA02 "Alloy PC-HIA XBUS Controller"
+ISABA03 "Alloy FTFA Tape & Floppy Controller"
+ISABB00 "BIT3 403/404/405 Bus Communications Adaptors"
+ISABC00 "Boca Research BOCARAM/AT Plus"
+ISABC01 "Boca Research I/O Master AT"
+ISABD00 "Racal-Interlan NP600A Ethernet 16bit"
+ISABD02 "Racal-Interlan NI5210/8 Ethernet"
+ISABD03 "Racal-Interlan NI5210/16 Ethernet"
+ISABE00 "Qua Tech PXB-1608 Parallel Expansion Board"
+ISABE01 "Qua Tech ES-100 8 Channel Asyncronous"
+ISABE02 "Qua Tech QS-100M 4 Channel Asyncronous"
+ISABE03 "Qua Tech MXI-100 IEEE 488 GPIB"
+ISABE04 "Qua Tech DS-201 Dual Channel RS-422"
+ISABE05 "Qua Tech PXB-721 Parallel Expansion"
+ISABE06 "Qua Tech DSDP-402 Dual Serial/Dual Parallel"
+ISABE07 "Qua Tech WSB-10 Waveform Synthesizer"
+ISABE08 "Qua Tech SmartLynx Multiport Adapter"
+ISABF00 "EOgraph Plus"
+ISAC000 "Corollary 8x4 Mux (Jumpers)"
+ISAC001 "Corollary 8x4 Mux (Rotary Switches)"
+ISAC002 "Corollary 8x4"
+ISAC100 "Bell Technologies' ACE Multiport Serial Card"
+ISAC200 "Micro-Integration PC-STWINAX"
+ISAC201 "Micro-Integration PC-MICOAX"
+ISAC300 "BlueLynx 5251-12"
+ISAC301 "BlueLynx 5250"
+ISAC302 "BlueLynx 3270 Remote"
+ISAC303 "BlueLynx Enhanced 5251-11"
+ISAC304 "BlueLynx 3270 Enhanced Coax"
+ISAC400 "Core CNT-ATP ESDI Internal FD Ctrl"
+ISAC500 "CEC PC 488 IEEE Printer Controller"
+ISAC600 "Vector International SCC Async/BSC/SDLC"
+ISAC700 "LSE Electronics YC808 Color Graphics Printer Adapter"
+ISAC701 "LSE Electronics Platinum VGA16 Card"
+ISAC800 "Street Electronics ECHO PC+ Speech Synthesizer"
+ISAC900 "SIIG ARCLAN-100 Arcnet Network Board."
+ISACA00 "National Instruments GPIB-PCIIA"
+ISACA01 "National Instruments AT-GPIB"
+ISACA02 "National Instruments GPIB-PC"
+ISACB00 "Konan TNT-1050 Caching Disk Controller"
+ISACC00 "Packard Bell PB 3270 Coax"
+ISACD00 "Digital Storage Systems ARC6000"
+ISACE00 "Ideaphone Input Device"
+ISACF00 "Atronics Professional Image Board Plus"
+ISAD000 "Bi-Tech SCSI 2110 HD/TAPE Controller"
+ISAD001 "Bi-Tech SCSI 2200 Controller"
+ISAD100 "Equinox Megaport Board"
+ISAD200 "Comtrol SMART HOSTESS Multiport Serial Card"
+ISAD300 "Emulex MPC-II Comm Controller"
+ISAD301 "Altos Wide Area Network Board /2"
+ISAD400 "Western Digital WD1004A-WX1 Controller"
+ISAD401 "Western Digital WD1006V-MM2 Winchester/Floppy Controller"
+ISAD402 "Western Digital WD1006V-SR2 Winchester/Floppy Controller"
+ISAD403 "Western Digital WD1007A-WAH Winchester Controller"
+ISAD404 "Western Digital WD1007V-SE1 Winchester Controller"
+ISAD500 "GammaLink GammaFax NA"
+ISAD501 "GammaLink GammaFax CP"
+ISAD600 "The Complete FAX/9600"
+ISAD601 "The Complete Page Scanner"
+ISAD602 "Scanman Plus"
+ISAD700 "Hughes 4140 Ethernet Board"
+ISAD701 "Hughes 6130 Broadband Network Card"
+ISAD702 "Hughes(Sytek) 6140 Token Ring Net. Board"
+ISAD800 "AMI SMART PACK 2 W/ PAL 5.1"
+ISAD801 "AMI SMART PACK 2 W/ PAL 6.1"
+ISAD802 "AMI SMART PACK 2 W/ PAL 6.2"
+ISAD900 "NEC Multisync Graphics Board GB-1"
+ISADA00 "Torus Systems Ethernet Adapter"
+ISADA01 "Torus Systems Ethernet Adapter/SB"
+ISADB00 "Rabbit Software RB14 X.25 Adapter"
+ISADB01 "Rabbit Software RB24 Multi-Protocol Comm"
+ISADC00 "Nth Graphics Nth Engine"
+ISADD00 "Chase AT4/AT8/AT16"
+ISADE00 "QMS JetScript"
+ISADF00 "Altos ACPA/AT"
+ISADF01 "SoundBlaster by Creative Labs, Inc."
+ISADF02 "Emerald Systems SCSI Tape Adapter"
+ISADF03 "Weitek Array Processor, Brd #3002-0046-01"
+ISAE000 "Headlands VGA 1024i Video Adapter"
+ISAE100 "Scanman Plus"
+ISAE300 "Overland Data 9-Track Tape TX-8 Controller"
+ISAE401 "Microfield V8 Color Graphics Controller"
+ISAE402 "Microfield T8 Color Graphics Controller"
+ISY0010 "(SYSTEM) VGA Board"
+ISY0020 "(SYSTEM) COM Ports"
+ISY0030 "(SYSTEM) Mother Board PS-2 style Mouse"
+ISY0040 "(SYSTEM) Hard Disk Controller"
+ISY0050 "(SYSTEM) Floppy Drive Controller"
+ISY0060 "(SYSTEM) LPT Ports"
+ISY0070 "(SYSTEM) IRQ9 Cascaded Interrupt"
+ITC0001 "EISA-486C Main Board"
+ITK0011 "ITK ixEins Basic S0/Up0 ISDN-Adapter Version 1.1"
+ITK0012 "ITK ixEins Basic S0/Up0 ISDN-Adapter Version 1.2"
+KCI3201 "ET32EM EISA 32-bit BUS-MASTER Ethernet Adapter"
+KCI3202 "ET-32EM 32-bit EISA Bus Master Ethernet Adapter"
+LEF8000 "LeafNet LAN Adapter"
+MCC0000 "MCC EISA-486 Board"
+MCC0001 "MCCI-486 EISA System Board"
+MCY2501 "Microdyne NE2500/NE5500 Series Ethernet Lan Adapter"
+MDG0002 "Madge Smart 16/4 EISA Ringnode"
+MDG0010 "Madge Smart 16/4 AT Ringnode"
+MDG0020 "Madge Smart 16/4 ISA Client Ringnode"
+MDG2000 "Madge Blue+ 16/4 ISA Token Ring Adapter"
+MDG2010 "Madge Blue+ 16/4 ISA PnP Token Ring Adapter"
+MET1104 "Metheus UGA 1104 Graphics Controller"
+MET1128 "Metheus UGA 1124/1128 Graphics Ctlr."
+MIC0001 "MICRONICS EISA 486 66/50/33/25 System Board"
+MIC0004 "MICRONICS 486 PCI-EISA System Board"
+MIC0005 "MICRONICS M5PE EISA-PCI Pentium System Board"
+MIC0021 "FD-0475 EISA Bus Ethernet LAN Adapter"
+MIC0054 "Micronics M54Pe Dual Pentium PCI-EISA System Board"
+MIC3001 "Micronics EISA3 System Board"
+MIC5402 "Micronics M54E2 Dual Pentium PCI-EISA System Board"
+MINIADP "Adaptec 32-bit SCSI Host Adapter (with floppy)"
+MIR0928 "miroCRYSTAL / miroMAGIC / miroRAINBOW (14-Sep-93) "
+MLX0010 "Mylex LNE390A EISA 32-bit Ethernet LAN Adapter"
+MLX0011 "Mylex LNE390B EISA 32-bit Ethernet LAN Adapter"
+MLX0020 "Mylex DCE376 EISA 32-Bit SCSI Host Adapter"
+MLX0021 "Mylex DCE376 EISA 32-Bit SCSI Host Adapter"
+MLX0022 "Mylex DCE376 EISA 32-Bit SCSI Host Adapter"
+MLX0030 "Mylex LNI390A ISA 16-Bit Ethernet LAN Adapter"
+MLX0040 "Mylex GXE020B or GXE020C EISA 32-Bit Graphics Controller"
+MLX0050 "Mylex GLE(911) EISA Graphics Adapter"
+MLX0070 "Mylex DAC960 EISA Disk Array Controller"
+MLX0071 "Mylex DAC960 EISA Disk Array Controller (3-channel)"
+MLX0072 "Mylex DAC960 EISA Disk Array Controller (3-channel)"
+MLX0073 "Mylex DAC960 EISA Disk Array Controller (2-channel)"
+MLX0074 "Mylex DAC960 EISA Disk Array Controller (1-channel)"
+MLX0075 "Mylex DAC960-A EISA Disk Array Controller (3-channel)"
+MLX0076 "Mylex DAC960-A EISA Disk Array Controller (2-channel)"
+MLX0077 "Mylex DAC960-A EISA Disk Array Controller (1-channel)"
+MLX0101 "Mylex LME596 EISA 32-bit 4 Channel Ethernet LAN Adapter"
+MLXFD01 "Mylex Corporation MDE486 EISA 32-Bit 486 System Board"
+MLXFE01 "Mylex MBE486 EISA 32-Bit 486 System Board"
+MLXFF01 "Mylex MAE486 EISA 32-Bit 486 System Board"
+MLXFF02 "Mylex Corporation MDE486 or MNE486 EISA 32-Bit 486 System Board"
+MTX2040 "MATROX IM-1280/EISA"
+NEC8201 "DPT SCSI Host Bus Adapter w/ Cache (PM2012B/90)"
+NIC0202 "AT-MIO-16 Multi-function Board"
+NIC0301 "AT-DIO-32F Digital I/O Board"
+NIC0400 "PC-DIO-24 Digital I/O Board"
+NIC0501 "LAB-PC/LAB-PC+ Multi-function Board"
+NIC0602 "AT-MIO-16F-5 Multi-function Board"
+NIC0700 "PC-DIO-96 Digital I/O Board"
+NIC0800 "PC-LPM-16 Low Power Multi-function Board"
+NIC0900 "PC-TIO-10 Timing I/O Board"
+NIC1000 "AT-A2150 16-bit 4 Channel A/D Board"
+NIC1100 "AT-DSP2200 DSP Accelerator/Audio I/O Board"
+NIC1200 "AT-AO-6/10 ANALOG OUTPUT BOARD"
+NIC1300 "AT-MIO-16X Multi-function Board"
+NIC1400 "AT-MIO-64F-5 Multi-function Board"
+NIC1500 "AT-MIO-16D Multi-function Board"
+NICC005 "National Instruments AT-GPIB Interface Board"
+NICC105 "National Instruments GPIB-PCIIA Interface Board"
+NICC205 "National Instruments GPIB-PCII Interface Board"
+NICC304 "National Instruments AT-GPIB/TNT"
+NICC502 "National Instruments EISA-GPIB"
+NON0101 "c't Universal 16-Bit Multi I/O Adapter"
+NON0102 "c't Universal 16-Bit Multi I/O Adapter"
+NON0201 "c't Universal 8-Bit Multi I/O Adapter"
+NON0301 "c't Universale Graphic Adapter"
+NON0401 "c't Universal Ethernet Adapter"
+NON0501 "c't Universal 16-Bit Sound Adapter"
+NON0601 "c't Universal 8-Bit Adapter"
+NSS0011 "Newport Systems Solutions WNIC Adapter"
+NVL0701 "Novell NE3200 Bus Master Ethernet"
+NVL0901 "Novell NE2100 Ethernet/Cheapernet Adapter"
+NVL1001 "Novell NMSL (Netware Mirrored Server Link)"
+NVL1201 "Novell NE32HUB 32-bit Base EISA Adapter"
+NVL1301 "Novell NE32HUB 32-bit TPE EISA Adapter"
+NVL1401 "Novell NE32HUB PME ISA Adapter"
+NVL1501 "Novell NE2000PLUS Ethernet Adapter"
+OLC0701 "Olicom ISA 16/4 Token-Ring Network Adapter"
+OLC0702 "Olicom OC-3117, ISA 16/4 Adapter (NIC)"
+OLC0801 "OC-3118 Olicom ISA 16/4 Token-Ring Network Adapter"
+OLC0901 "Olicom EISA 16/4 Token-Ring Network Adapter"
+OLC0902 "Olicom EISA 16/4 Token-Ring Network Adapter"
+OLC0B01 "Olicom PCA 16/4 Token-Ring Network Adapter"
+OLC1201 "Olicom 32 Bit EISA 16/4 Token-Ring Network Adapter"
+OPT0000 "OPTi HUNTER EISA 32-Bit 486 System Board"
+OPT0200 "OPTi LOW_COST EISA 32-Bit 486 System Board"
+OTI0011 "Pro II/EISA"
+PCI0080 "PIONEER 486WB 8 SLOT EISA SYSTEM BOARD"
+PCI0120 "PIONEER 486WB 12 SLOT EISA SYSTEM BOARD"
+PCI2080 "PIONEER 486WB 8 SLOT EISA SYSTEM BOARD"
+PHI8041 "Standard VGA controller"
+PLX1001 "OCEAN EISALink EISA 32-Bit BUS-MASTER Ethernet Controller"
+PRO6000 "Proteon ProNET 4/16 Token Ring Adapter"
+PRO6001 "Proteon ProNET 4/16 Token Ring Adapter"
+PRO6002 "Proteon ProNET 4/16 Token Ring Adapter"
+PTI5401 "Poseidon P6 QUAD PCI-EISA Board"
+RII0101 "Racal InterLan ES3210 Ethernet Controller"
+SEC0010 "SAMSUNG ISA Multifunction Card"
+SEC0020 "SAMSUNG VGA Card (GTI VC-004)"
+SEC0021 "WD 90C31 Local Bus VGA"
+SECFF01 "SAMSUNG MAE486 System Board"
+SECFF02 "OPTi/EISA 32-Bit 486 System Board"
+SGT0101 "AT&T GIS  8/16 Port Serial Controller"
+SIS0000 "4DESD EISA-486 System Board"
+SIS0001 "EISA-486 Demo Board"
+SKD0100 "SK-NET FDDI-FE EISA 32-Bit FDDI LAN Adapter"
+SMC0110 "Standard Microsystems Corp. Elite32 Ethernet"
+SMC03E0 "SMC EtherCard PLUS Family LAN Adapters"
+SMC13E0 "SMC EtherCard PLUS Elite16 Family LAN Adapters"
+SMC8003 "SMC EtherCard PLUS Elite Family LAN Adapters"
+SMC8010 "SMC Ethercard Elite32C Ultra"
+SMC8013 "SMC EtherCard PLUS Elite16 Family LAN Adapters"
+SMC8216 "SMC EtherCard Elite16 ULTRA Family LAN Adapters"
+SMCA010 "SMC Ether 10/100"
+SNIAAA0 "Siemens Nixdorf Ether-Board EISA T"
+SNIAAB0 "Siemens Nixdorf Ether-Board EISA 2"
+SNIABF0 "Siemens Nixdorf ETHER-BOARD-AT105T Ethernet/Cheapernet Adapter"
+SNIACA0 "Siemens Nixdorf ETHER-BOARD-AT10T Ethernet/Twisted Pair Adapter"
+STL0100 "Stallion Technologies - ONboard/E"
+STL0120 "Stallion Technologies - ONboard ISA"
+STL0130 "Stallion Technologies - Brumby ISA"
+STL0200 "Stallion Technologies - EasyIO"
+STL0400 "Stallion Technologies - EC 8/64-EI"
+STL0410 "Stallion Technologies - EC 8/32-AT"
+STL0420 "Stallion Technologies - EC 8/64-AT"
+SUK1022 "SK-NET Token Ring LAN Interface Board"
+SUK1059 "SK-NET G16 LAN Interface Board"
+SUK1072 "SK-FDDI FI LAN Interface Board"
+TCC010C "Thomas-Conrad TC6045 ARC-Card/AT"
+TCC030D "Thomas-Conrad TC6042 ARC-Card/CE"
+TCC040B "Thomas-Conrad TC6142 ARC-Card/CE"
+TCC3047 "Thomas-Conrad TC3047 TCNS Adapter/EISA"
+TCM3190 "3Com 3C319 TokenLink Velocity ISA NIC"
+TCM5030 "3COM EtherLink II Family"
+TCM5070 "3COM 3C507 Etherlink 16 or TP v2.0"
+TCM5090 "3Com 3C509-TP Network Adapter"
+TCM5091 "3Com 3C509 Network Adapter"
+TCM5092 "3Com 3C579-TP EISA Network Adapter"
+TCM5093 "3Com 3C579 EISA Network Adapter"
+TCM5094 "3Com 3C509-Combo Network Adapter"
+TCM5095 "3Com 3C509-TPO Network Adapter"
+TCM5098 "3Com 3C509-TPC Network Adapter"
+TCM5920 "3Com EtherLink III Bus Master EISA (3C592) Network Adapter"
+TCM5970 "3Com Fast EtherLink EISA (3C597-TX) Network Adapter"
+TCM5971 "3C597 Fast Etherlink T4"
+TCM5972 "3C597 Fast Etherlink MII"
+TCM7700 "3Com 3C770 FDDI Adapter"
+TCO010C "Thomas-Conrad TC6045 ARC-Card/AT"
+TCO030D "Thomas-Conrad TC6042 ARC-Card/CE"
+TCO040B "Thomas-Conrad TC6142 ARC-Card/CE"
+TCO050D "Thomas-Conrad TC4035 TOKEN RING Adapter/AT (Rev D)"
+TCO3147 "TC3047 Thomas Conrad Network System (TCNS) EISA Adapter"
+TCO345A "TC3045 Thomas-Conrad Network System (TCNS) AT Adapter"
+TCO345B "TC3045 Thomas-Conrad Network System (TCNS) AT Adapter"
+TEC8000 "Tecmar QIC60 HOST ADAPTER"
+TEC8001 "Tecmar QIC PC36 TAPE CONTROLLER"
+TEC8002 "Tecmar QT HOST ADAPTER"
+TEC8003 "Tecmar QT PC36 TAPE CONTROLLER"
+TRM0001 "EISA-486C SYSTEM BOARD"
+TRM0320 "DC-320 EISA SCSI Host Adapter"
+TRM0620 "DC-620 EISA IDE Cache Controller"
+TRM0820 "DC-820 EISA SCSI Cache Host Adapter"
+TRM320E "DC-320E EISA SCSI Host Adapter"
+TRM820B "DC-820B EISA SCSI Cache Host Adapter"
+TRU0210 "Truevision Image Capture Board"
+TRU0520 "Truevision ATVista (R) VideoGraphics Adapter"
+TRU1100 "Truevision DVR"
+TXN0011 "TACT84500 MODULAR EISA SYSTEM BOARD"
+TYN0000 "Tyan 486 PRO-EISA Board"
+TYN0001 "TYN VL EISA-486  Board"
+TYN0003 "Tyn S1452/S1462 PCI-EISA Main Board"
+UBIA100 "Ungermann-Bass Personal NIU"
+UBIA200 "Ungermann-Bass Personal NIU/ex"
+UBIB100 "Ungermann-Bass NIUpc"
+UBIB200 "Ungermann-Bass 3270 NIUpc"
+UBIC100 "Ungermann-Bass NIC"
+UBID100 "Ungermann-Bass NIUpc/Token Ring"
+USC0120 "UltraStor - ULTRA-12F ISA ESDI Hard Disk Controller"
+USC0125 "UltraStor - ULTRA-12C ESDI Hard Disk Controller"
+USC0140 "UltraStor - ULTRA-14F ISA SCSI Host Adapter"
+USC0220 "UltraStor - U22C"
+USC0225 "UltraStor - ULTRA-22F ESDI Hard Disk Controller"
+USC0240 "UltraStor - ULTRA-24F SCSI Host Adapter"
+USC0340 "UltraStor - ULTRA-34F VESA VL-BUS Host Adapter"
+USR0011 "USROBOTICS 33.6 TELEPHONY MODEM"
+USR3401 "U S Robotics V.34-Ready Fax Modem"
+VMI0201 "Vermont Image Manager 1024"
+VMI0211 "Vermont Cobra"
+VMI0601 "Vermont Image Manager 640"
+VMI0E01 "Vermont Cobra Plus"
+WDC0101 "Western Digital WD1009V-MM1 Winchester Controller"
+WDC0102 "Western Digital WD1009V-SE1 Winchester Controller"
+WDC0300 "Western Digital StarCard PLUS 8003S"
+WDC0301 "Western Digital StarLink PLUS 8003SH"
+WDC03E0 "Western Digital EtherCard PLUS 8003E"
+WDC03E1 "Western Digital EtherCard PLUS w/Boot 8003EBT"
+WDC03E2 "Western Digital EtherCard + 8003EB 61-600245-02"
+WDC03E3 "Western Digital EtherCard PLUS TP 8003WT"
+WDC03E4 "Western Digital EtherCard + 8003EB 61-600090-00"
+WDC0510 "Western Digital TokenCard 8005TR/8005TRWS"
+WDC1009 "Western Digital WD1009V-MM1/MM2 Winchester Controller"
+WDC13E0 "Western Digital EtherCard PLUS 16 8013EBT"
+XTI02B1 "XNET 1800 PARALLEL SWITCH"
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -53,11 +53,13 @@
 			- Additional ethtool features
 		v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com>
 			- Increase *read_eeprom udelay to workaround oops with 2 cards.
+		v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
+		    - Introduce driver model for EISA cards.
 */

 #define DRV_NAME	"3c509"
-#define DRV_VERSION	"1.19a"
-#define DRV_RELDATE	"28Oct2002"
+#define DRV_VERSION	"1.19b"
+#define DRV_RELDATE	"08Nov2002"

 /* A few values that may be tweaked. */

@@ -84,6 +86,8 @@ static int max_interrupt_work = 10;
 #include <linux/delay.h>	/* for udelay() */
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
+#include <linux/device.h>
+#include <linux/eisa.h>

 #include <asm/uaccess.h>
 #include <asm/bitops.h>
@@ -170,6 +174,9 @@ struct el3_private {
 #ifdef __ISAPNP__
 	struct pnp_dev *pnpdev;
 #endif
+#ifdef CONFIG_EISA
+	struct eisa_device *edev;
+#endif
 };
 static int id_port __initdata = 0x110;	/* Start with 0x110 to avoid new sound cards.*/
 static struct net_device *el3_root_dev;
@@ -194,6 +201,26 @@ static int el3_resume(struct pm_dev *pdev);
 static int el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data);
 #endif

+#ifdef CONFIG_EISA
+struct eisa_device_id el3_eisa_ids[] = {
+		{ "TCM5092" },
+		{ "TCM5093" },
+		{ "" }
+};
+
+static int el3_eisa_probe (struct device *device);
+static int el3_eisa_remove (struct device *device);
+
+struct eisa_driver el3_eisa_driver = {
+		.id_table = el3_eisa_ids,
+		.driver   = {
+				.name    = "3c509",
+				.probe   = el3_eisa_probe,
+				.remove  = __devexit_p (el3_eisa_remove)
+		}
+};
+#endif
+
 #ifdef CONFIG_MCA
 struct el3_mca_adapters_struct {
 	char* name;
@@ -240,8 +267,97 @@ static u16 el3_isapnp_phys_addr[8][3];
 #endif /* __ISAPNP__ */
 static int nopnp;

-int __init el3_probe(struct net_device *dev, int card_idx)
+/* With the driver model introduction for EISA devices, both init
+ * and cleanup have been split :
+ * - EISA devices probe/remove starts in el3_eisa_probe/el3_eisa_remove
+ * - MCA/ISA still use el3_probe
+ *
+ * Both call el3_common_init/el3_common_remove. */
+
+static int __init el3_common_init (struct net_device *dev)
+{
+	struct el3_private *lp = dev->priv;
+	short i;
+  
+#ifdef CONFIG_EISA
+	if (!lp->edev)				/* EISA devices are not chained */
+#endif
+	{
+			lp->next_dev = el3_root_dev;
+			el3_root_dev = dev;
+	}
+	spin_lock_init(&lp->lock);
+
+	if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */
+		dev->if_port = (dev->mem_start & 0x0f);
+	} else { /* xcvr codes 0/8 */
+		/* use eeprom value, but save user's full-duplex selection */
+		dev->if_port |= (dev->mem_start & 0x08);
+	}
+
+	{
+		const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
+		printk("%s: 3c5x9 at %#3.3lx, %s port, address ",
+			dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)]);
+	}
+
+	/* Read in the station address. */
+	for (i = 0; i < 6; i++)
+		printk(" %2.2x", dev->dev_addr[i]);
+	printk(", IRQ %d.\n", dev->irq);
+
+	if (el3_debug > 0)
+		printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+
+	/* The EL3-specific entries in the device structure. */
+	dev->open = &el3_open;
+	dev->hard_start_xmit = &el3_start_xmit;
+	dev->stop = &el3_close;
+	dev->get_stats = &el3_get_stats;
+	dev->set_multicast_list = &set_multicast_list;
+	dev->tx_timeout = el3_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+	dev->do_ioctl = netdev_ioctl;
+
+#ifdef CONFIG_PM
+	/* register power management */
+	lp->pmdev = pm_register(PM_ISA_DEV, card_idx, el3_pm_callback);
+	if (lp->pmdev) {
+		struct pm_dev *p;
+		p = lp->pmdev;
+		p->data = (struct net_device *)dev;
+	}
+#endif
+
+	return 0;
+}
+
+static void el3_common_remove (struct net_device *dev)
+{
+		struct el3_private *lp = dev->priv;
+
+		(void) lp;				/* Keep gcc quiet... */
+#ifdef CONFIG_MCA		
+		if(lp->mca_slot!=-1)
+			mca_mark_as_unused(lp->mca_slot);
+#endif
+#ifdef CONFIG_PM
+		if (lp->pmdev)
+			pm_unregister(lp->pmdev);
+#endif
+#ifdef __ISAPNP__
+		if (lp->pnpdev)
+			pnp_device_detach(lp->pnpdev);
+#endif
+
+		unregister_netdev (dev);
+		release_region(dev->base_addr, EL3_IO_EXTENT);
+		kfree (dev);
+}
+
+static int __init el3_probe(int card_idx)
 {
+	struct net_device *dev;
 	struct el3_private *lp;
 	short lrs_state = 0xff, i;
 	int ioaddr, irq, if_port;
@@ -253,44 +369,6 @@ int __init el3_probe(struct net_device *dev, int card_idx)
 	struct pnp_dev *idev = NULL;
 #endif /* __ISAPNP__ */

-	if (dev) SET_MODULE_OWNER(dev);
-
-	/* First check all slots of the EISA bus.  The next slot address to
-	   probe is kept in 'eisa_addr' to support multiple probe() calls. */
-	if (EISA_bus) {
-		static int eisa_addr = 0x1000;
-		while (eisa_addr < 0x9000) {
-			int device_id;
-
-			ioaddr = eisa_addr;
-			eisa_addr += 0x1000;
-
-			/* Check the standard EISA ID register for an encoded '3Com'. */
-			if (inw(ioaddr + 0xC80) != 0x6d50)
-				continue;
-
-			/* Avoid conflict with 3c590, 3c592, 3c597, etc */
-			device_id = (inb(ioaddr + 0xC82)<<8) + inb(ioaddr + 0xC83);
-			if ((device_id & 0xFF00) == 0x5900) {
-				continue;
-			}
-
-			/* Change the register set to the configuration window 0. */
-			outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
-
-			irq = inw(ioaddr + WN0_IRQ) >> 12;
-			if_port = inw(ioaddr + 6)>>14;
-			for (i = 0; i < 3; i++)
-				phys_addr[i] = htons(read_eeprom(ioaddr, i));
-
-			/* Restore the "Product ID" to the EEPROM read register. */
-			read_eeprom(ioaddr, 3);
-
-			/* Was the EISA code an add-on hack?  Nahhhhh... */
-			goto found;
-		}
-	}
-
 #ifdef CONFIG_MCA
 	/* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, heavily
 	 * modified by Chris Beauregard (cpbeaure@csclub.uwaterloo.ca)
@@ -469,6 +547,8 @@ int __init el3_probe(struct net_device *dev, int card_idx)
 	}
 	irq = id_read_eeprom(9) >> 12;

+#if 0							/* Huh ?
+								   Can someone explain what is this for ? */
 	if (dev) {					/* Set passed-in IRQ or I/O Addr. */
 		if (dev->irq > 1  &&  dev->irq < 16)
 			irq = dev->irq;
@@ -481,6 +561,7 @@ int __init el3_probe(struct net_device *dev, int card_idx)
 				return -ENODEV;
 		}
 	}
+#endif

 	if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
 		return -EBUSY;
@@ -500,79 +581,86 @@ int __init el3_probe(struct net_device *dev, int card_idx)
 	/* Free the interrupt so that some other card can use it. */
 	outw(0x0f00, ioaddr + WN0_IRQ);
 found:
+	dev = init_etherdev(NULL, sizeof(struct el3_private));
 	if (dev == NULL) {
-		dev = init_etherdev(dev, sizeof(struct el3_private));
-		if (dev == NULL) {
-			release_region(ioaddr, EL3_IO_EXTENT);
-			return -ENOMEM;
-		}
-		SET_MODULE_OWNER(dev);
+	    release_region(ioaddr, EL3_IO_EXTENT);
+		return -ENOMEM;
 	}
+	SET_MODULE_OWNER(dev);
+
 	memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
 	dev->base_addr = ioaddr;
 	dev->irq = irq;
-
-	if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */
-		dev->if_port = (dev->mem_start & 0x0f);
-	} else { /* xcvr codes 0/8 */
-		/* use eeprom value, but save user's full-duplex selection */
-		dev->if_port = (if_port | (dev->mem_start & 0x08) );
-	}
-
-	{
-		const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
-		printk("%s: 3c5x9 at %#3.3lx, %s port, address ",
-			dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)]);
-	}
-
-	/* Read in the station address. */
-	for (i = 0; i < 6; i++)
-		printk(" %2.2x", dev->dev_addr[i]);
-	printk(", IRQ %d.\n", dev->irq);
-
-	/* Make up a EL3-specific-data structure. */
-	if (dev->priv == NULL)
-		dev->priv = kmalloc(sizeof(struct el3_private), GFP_KERNEL);
-	if (dev->priv == NULL)
-		return -ENOMEM;
-	memset(dev->priv, 0, sizeof(struct el3_private));
-	
+	dev->if_port = if_port;
 	lp = dev->priv;
 #ifdef __ISAPNP__
 	lp->pnpdev = idev;
 #endif
 	lp->mca_slot = mca_slot;
-	lp->next_dev = el3_root_dev;
-	spin_lock_init(&lp->lock);
-	el3_root_dev = dev;

-	if (el3_debug > 0)
-		printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+	return el3_common_init (dev);
+}

-	/* The EL3-specific entries in the device structure. */
-	dev->open = &el3_open;
-	dev->hard_start_xmit = &el3_start_xmit;
-	dev->stop = &el3_close;
-	dev->get_stats = &el3_get_stats;
-	dev->set_multicast_list = &set_multicast_list;
-	dev->tx_timeout = el3_tx_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->do_ioctl = netdev_ioctl;
+#ifdef CONFIG_EISA
+static int __init el3_eisa_probe (struct device *device)
+{
+	struct el3_private *lp;
+	short i;
+	int ioaddr, irq, if_port;
+	u16 phys_addr[3];
+	struct net_device *dev = NULL;
+	struct eisa_device *edev;

-#ifdef CONFIG_PM
-	/* register power management */
-	lp->pmdev = pm_register(PM_ISA_DEV, card_idx, el3_pm_callback);
-	if (lp->pmdev) {
-		struct pm_dev *p;
-		p = lp->pmdev;
-		p->data = (struct net_device *)dev;
+	/* Yeepee, The driver framework is calling us ! */
+	edev = to_eisa_device (device);
+	ioaddr = edev->base_addr;
+	
+	if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
+		return -EBUSY;
+
+	/* Change the register set to the configuration window 0. */
+	outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
+
+	irq = inw(ioaddr + WN0_IRQ) >> 12;
+	if_port = inw(ioaddr + 6)>>14;
+	for (i = 0; i < 3; i++)
+			phys_addr[i] = htons(read_eeprom(ioaddr, i));
+
+	/* Restore the "Product ID" to the EEPROM read register. */
+	read_eeprom(ioaddr, 3);
+
+	dev = init_etherdev(NULL, sizeof(struct el3_private));
+	if (dev == NULL) {
+			release_region(ioaddr, EL3_IO_EXTENT);
+			return -ENOMEM;
 	}
-#endif

-	/* Fill in the generic fields of the device structure. */
-	ether_setup(dev);
-	return 0;
+	SET_MODULE_OWNER(dev);
+
+	memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+	dev->if_port = if_port;
+	lp = dev->priv;
+	lp->mca_slot = -1;
+	lp->edev = edev;
+	eisa_set_drvdata (edev, dev);
+
+	return el3_common_init (dev);
+}
+
+static int __devexit el3_eisa_remove (struct device *device)
+{
+		struct eisa_device *edev;
+		struct net_device *dev;
+
+		edev = to_eisa_device (device);
+		dev  = eisa_get_drvdata (edev);
+
+		el3_common_remove (dev);
+		return 0;
 }
+#endif

 /* Read a word from the EEPROM using the regular EEPROM access register.
   Assume that we are in register window zero.
@@ -982,7 +1070,8 @@ static int
 el3_close(struct net_device *dev)
 {
 	int ioaddr = dev->base_addr;
-
+	struct el3_private *lp = (struct el3_private *)dev->priv;
+	
 	if (el3_debug > 2)
 		printk("%s: Shutting down ethercard.\n", dev->name);

@@ -991,8 +1080,12 @@ el3_close(struct net_device *dev)
 	free_irq(dev->irq, dev);
 	/* Switching back to window 0 disables the IRQ. */
 	EL3WINDOW(0);
-	/* But we explicitly zero the IRQ line select anyway. */
-	outw(0x0f00, ioaddr + WN0_IRQ);
+	if (!lp->edev) {
+	    /* But we explicitly zero the IRQ line select anyway. Don't do
+	     * it on EISA cards, it prevents the module from getting an
+	     * IRQ after unload+reload... */
+	    outw(0x0f00, ioaddr + WN0_IRQ);
+	}

 	return 0;
 }
@@ -1414,7 +1507,6 @@ el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)

 #endif /* CONFIG_PM */

-#ifdef MODULE
 /* Parameters that may be passed into the module. */
 static int debug = -1;
 static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
@@ -1436,8 +1528,7 @@ MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters);
 MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B) ISA/PnP ethernet driver");
 MODULE_LICENSE("GPL");

-int
-init_module(void)
+static int __init el3_init_module(void)
 {
 	int el3_cards = 0;

@@ -1445,7 +1536,7 @@ init_module(void)
 		el3_debug = debug;

 	el3_root_dev = NULL;
-	while (el3_probe(0, el3_cards) == 0) {
+	while (el3_probe(el3_cards) == 0) {
 		if (irq[el3_cards] > 1)
 			el3_root_dev->irq = irq[el3_cards];
 		if (xcvr[el3_cards] >= 0)
@@ -1453,38 +1544,36 @@ init_module(void)
 		el3_cards++;
 	}

+#ifdef CONFIG_EISA
+	if (eisa_driver_register (&el3_eisa_driver) < 0) {
+			eisa_driver_unregister (&el3_eisa_driver);
+	}
+	else
+			el3_cards++;				/* Found an eisa card */
+#endif
 	return el3_cards ? 0 : -ENODEV;
 }

-void
-cleanup_module(void)
+static void __exit el3_cleanup_module(void)
 {
 	struct net_device *next_dev;

 	/* No need to check MOD_IN_USE, as sys_delete_module() checks. */
 	while (el3_root_dev) {
 		struct el3_private *lp = (struct el3_private *)el3_root_dev->priv;
-#ifdef CONFIG_MCA		
-		if(lp->mca_slot!=-1)
-			mca_mark_as_unused(lp->mca_slot);
-#endif

-#ifdef CONFIG_PM
-		if (lp->pmdev)
-			pm_unregister(lp->pmdev);
-#endif
 		next_dev = lp->next_dev;
-		unregister_netdev(el3_root_dev);
-		release_region(el3_root_dev->base_addr, EL3_IO_EXTENT);
-#ifdef __ISAPNP__
-		if (lp->pnpdev)
-			pnp_device_detach(lp->pnpdev);
-#endif
-		kfree(el3_root_dev);
+		el3_common_remove (el3_root_dev);
 		el3_root_dev = next_dev;
 	}
+
+#ifdef CONFIG_EISA
+	eisa_driver_unregister (&el3_eisa_driver);
+#endif
 }
-#endif /* MODULE */
+
+module_init (el3_init_module);
+module_exit (el3_cleanup_module);

 /*
 * Local variables:

--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -180,6 +180,9 @@

    - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details.
    - Also see Documentation/networking/vortex.txt
+
+   LK1.1.19 10Nov09 Marc Zyngier <maz@wild-wind.fr.eu.org>
+    - EISA sysfs integration.
 */

 /*
@@ -193,8 +196,8 @@


 #define DRV_NAME	"3c59x"
-#define DRV_VERSION	"LK1.1.18"
-#define DRV_RELDATE	"1 Jul 2002"
+#define DRV_VERSION	"LK1.1.19"
+#define DRV_RELDATE	"10 Nov 2002"



@@ -259,7 +262,7 @@ static int vortex_debug = 1;
 #include <linux/skbuff.h>
 #include <linux/ethtool.h>
 #include <linux/highmem.h>
-
+#include <linux/eisa.h>
 #include <asm/irq.h>			/* For NR_IRQS only. */
 #include <asm/bitops.h>
 #include <asm/io.h>
@@ -768,7 +771,6 @@ struct vortex_private {
 	/* The addresses of transmit- and receive-in-place skbuffs. */
 	struct sk_buff* rx_skbuff[RX_RING_SIZE];
 	struct sk_buff* tx_skbuff[TX_RING_SIZE];
-	struct net_device *next_module;		/* NULL if PCI device */
 	unsigned int cur_rx, cur_tx;		/* The next free ring entry */
 	unsigned int dirty_rx, dirty_tx;	/* The ring entries to be free()ed. */
 	struct net_device_stats stats;
@@ -776,7 +778,7 @@ struct vortex_private {
 	dma_addr_t tx_skb_dma;				/* Allocated DMA address for bus master ctrl DMA.   */

 	/* PCI configuration space information. */
-	struct pci_dev *pdev;
+	struct device *gendev;
 	char *cb_fn_base;					/* CardBus function status addr space. */

 	/* Some values here only for performance evaluation and path-coverage */
@@ -815,6 +817,18 @@ struct vortex_private {
 	u32 power_state[16];
 };

+#define DEVICE_PCI(dev) (((dev)->bus == &pci_bus_type) ? to_pci_dev((dev)) : NULL)
+
+#define VORTEX_PCI(vp) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL)
+
+#ifdef CONFIG_EISA
+#define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL)
+#else
+#define DEVICE_EISA(dev) NULL
+#endif
+
+#define VORTEX_EISA(vp) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL)
+
 /* The action to take with a media selection timer tick.
   Note that we deviate from the 3Com order by checking 10base2 before AUI.
 */
@@ -843,7 +857,7 @@ static struct media_table {
  { "Default",	 0,			0xFF, XCVR_10baseT, 10000},
 };

-static int vortex_probe1(struct pci_dev *pdev, long ioaddr, int irq,
+static int vortex_probe1(struct device *gendev, long ioaddr, int irq,
 				   int chip_idx, int card_idx);
 static void vortex_up(struct net_device *dev);
 static void vortex_down(struct net_device *dev);
@@ -882,11 +896,9 @@ static int global_enable_wol = -1;

 /* #define dev_alloc_skb dev_alloc_skb_debug */

-/* A list of all installed Vortex EISA devices, for removing the driver module. */
-static struct net_device *root_vortex_eisa_dev;
-
 /* Variables to work-around the Compaq PCI BIOS32 problem. */
 static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900;
+static struct net_device *compaq_net_device;

 static int vortex_cards_found;

@@ -920,44 +932,89 @@ static int vortex_resume (struct pci_dev *pdev)

 #endif /* CONFIG_PM */

-/* returns count found (>= 0), or negative on error */
-static int __init vortex_eisa_init (void)
+#ifdef CONFIG_EISA
+static struct eisa_device_id vortex_eisa_ids[] = {
+	{ "TCM5920" },
+	{ "TCM5970" },
+	{ "" }
+};
+
+static int vortex_eisa_probe (struct device *device);
+static int vortex_eisa_remove (struct device *device);
+
+static struct eisa_driver vortex_eisa_driver = {
+	.id_table = vortex_eisa_ids,
+	.driver   = {
+		.name    = "3c59x",
+		.probe   = vortex_eisa_probe,
+		.remove  = vortex_eisa_remove
+	}
+};
+
+static int vortex_eisa_probe (struct device *device)
 {
 	long ioaddr;
-	int rc;
-	int orig_cards_found = vortex_cards_found;
+	struct eisa_device *edev;

-	/* Now check all slots of the EISA bus. */
-	if (!EISA_bus)
-		return 0;
+	edev = to_eisa_device (device);
+	ioaddr = edev->base_addr;

-	for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
-		int device_id;
+	if (!request_region(ioaddr, VORTEX_TOTAL_SIZE, DRV_NAME))
+		return -EBUSY;

-		if (request_region(ioaddr, VORTEX_TOTAL_SIZE, DRV_NAME) == NULL)
-			continue;
+	if (vortex_probe1(device, ioaddr, inw(ioaddr + 0xC88) >> 12,
+					  EISA_TBL_OFFSET, vortex_cards_found)) {
+		release_region (ioaddr, VORTEX_TOTAL_SIZE);
+		return -ENODEV;
+	}

-		/* Check the standard EISA ID register for an encoded '3Com'. */
-		if (inw(ioaddr + 0xC80) != 0x6d50) {
-			release_region (ioaddr, VORTEX_TOTAL_SIZE);
-			continue;
-		}
+	vortex_cards_found++;

-		/* Check for a product that we support, 3c59{2,7} any rev. */
-		device_id = (inb(ioaddr + 0xC82)<<8) + inb(ioaddr + 0xC83);
-		if ((device_id & 0xFF00) != 0x5900) {
-			release_region (ioaddr, VORTEX_TOTAL_SIZE);
-			continue;
-		}
+	return 0;
+}

-		rc = vortex_probe1(NULL, ioaddr, inw(ioaddr + 0xC88) >> 12,
-				   EISA_TBL_OFFSET, vortex_cards_found);
-		if (rc == 0)
-			vortex_cards_found++;
-		else
-			release_region (ioaddr, VORTEX_TOTAL_SIZE);
+static int vortex_eisa_remove (struct device *device)
+{
+	struct eisa_device *edev;
+	struct net_device *dev;
+	struct vortex_private *vp;
+	long ioaddr;
+
+	edev = to_eisa_device (device);
+	dev = eisa_get_drvdata (edev);
+
+	if (!dev) {
+		printk("vortex_eisa_remove called for Compaq device!\n");
+		BUG();
 	}

+	vp = dev->priv;
+	ioaddr = dev->base_addr;
+	
+	unregister_netdev (dev);
+	outw (TotalReset|0x14, ioaddr + EL3_CMD);
+	release_region (ioaddr, VORTEX_TOTAL_SIZE);
+
+	kfree (dev);
+	return 0;
+}
+#endif
+
+/* returns count found (>= 0), or negative on error */
+static int __init vortex_eisa_init (void)
+{
+	int orig_cards_found = vortex_cards_found;
+
+	/* Now check all slots of the EISA bus. */
+	if (!EISA_bus)
+		return 0;
+
+#ifdef CONFIG_EISA
+	if (eisa_driver_register (&vortex_eisa_driver) < 0) {
+		eisa_driver_unregister (&vortex_eisa_driver);
+	}
+#endif
+	
 	/* Special code to work-around the Compaq PCI BIOS32 problem. */
 	if (compaq_ioaddr) {
 		vortex_probe1(NULL, compaq_ioaddr, compaq_irq,
@@ -977,8 +1034,8 @@ static int __devinit vortex_init_one (struct pci_dev *pdev,
 	if (pci_enable_device (pdev)) {
 		rc = -EIO;
 	} else {
-		rc = vortex_probe1 (pdev, pci_resource_start (pdev, 0), pdev->irq,
-				    ent->driver_data, vortex_cards_found);
+		rc = vortex_probe1 (&pdev->dev, pci_resource_start (pdev, 0),
+							pdev->irq, ent->driver_data, vortex_cards_found);
 		if (rc == 0)
 			vortex_cards_found++;
 	}
@@ -986,12 +1043,12 @@ static int __devinit vortex_init_one (struct pci_dev *pdev,
 }

 /*
- * Start up the PCI device which is described by *pdev.
+ * Start up the PCI/EISA device which is described by *gendev.
 * Return 0 on success.
 *
- * NOTE: pdev can be NULL, for the case of an EISA driver
+ * NOTE: pdev can be NULL, for the case of a Compaq device
 */
-static int __devinit vortex_probe1(struct pci_dev *pdev,
+static int __devinit vortex_probe1(struct device *gendev,
 				   long ioaddr, int irq,
 				   int chip_idx, int card_idx)
 {
@@ -1003,14 +1060,24 @@ static int __devinit vortex_probe1(struct pci_dev *pdev,
 	static int printed_version;
 	int retval, print_info;
 	struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx];
-	char *print_name;
+	char *print_name = "3c59x";
+	struct pci_dev *pdev = NULL;
+	struct eisa_device *edev = NULL;

 	if (!printed_version) {
 		printk (version);
 		printed_version = 1;
 	}

-	print_name = pdev ? pdev->slot_name : "3c59x";
+	if (gendev) {
+		if ((pdev = DEVICE_PCI(gendev))) {
+			print_name = pdev->slot_name;
+		}
+
+		if ((edev = DEVICE_EISA(gendev))) {
+			print_name = edev->dev.bus_id;
+		}
+	}

 	dev = alloc_etherdev(sizeof(*vp));
 	retval = -ENOMEM;
@@ -1063,10 +1130,9 @@ static int __devinit vortex_probe1(struct pci_dev *pdev,
 	vp->io_size = vci->io_size;
 	vp->card_idx = card_idx;

-	/* module list only for EISA devices */
-	if (pdev == NULL) {
-		vp->next_module = root_vortex_eisa_dev;
-		root_vortex_eisa_dev = dev;
+	/* module list only for Compaq device */
+	if (gendev == NULL) {
+		compaq_net_device = dev;
 	}

 	/* PCI-only startup logic */
@@ -1100,7 +1166,7 @@ static int __devinit vortex_probe1(struct pci_dev *pdev,

 	spin_lock_init(&vp->lock);
 	spin_lock_init(&vp->mdio_lock);
-	vp->pdev = pdev;
+	vp->gendev = gendev;

 	/* Makes sure rings are at least 16 byte aligned. */
 	vp->rx_ring = pci_alloc_consistent(pdev, sizeof(struct boom_rx_desc) * RX_RING_SIZE
@@ -1117,6 +1183,8 @@ static int __devinit vortex_probe1(struct pci_dev *pdev,
 	 * instead of a module list */	
 	if (pdev)
 		pci_set_drvdata(pdev, dev);
+	if (edev)
+		eisa_set_drvdata (edev, dev);

 	vp->media_override = 7;
 	if (option >= 0) {
@@ -1367,7 +1435,7 @@ static int __devinit vortex_probe1(struct pci_dev *pdev,
 	dev->watchdog_timeo = (watchdog * HZ) / 1000;
 	if (pdev && vp->enable_wol) {
 		vp->pm_state_valid = 1;
- 		pci_save_state(vp->pdev, vp->power_state);
+ 		pci_save_state(VORTEX_PCI(vp), vp->power_state);
 		acpi_set_WOL(dev);
 	}
 	retval = register_netdev(dev);
@@ -1422,9 +1490,9 @@ vortex_up(struct net_device *dev)
 	unsigned int config;
 	int i;

-	if (vp->pdev && vp->enable_wol) {
-		pci_set_power_state(vp->pdev, 0);	/* Go active */
-		pci_restore_state(vp->pdev, vp->power_state);
+	if (VORTEX_PCI(vp) && vp->enable_wol) {
+		pci_set_power_state(VORTEX_PCI(vp), 0);	/* Go active */
+		pci_restore_state(VORTEX_PCI(vp), vp->power_state);
 	}

 	/* Before initializing select the active media port. */
@@ -1641,7 +1709,7 @@ vortex_open(struct net_device *dev)
 				break;			/* Bad news!  */
 			skb->dev = dev;			/* Mark as being used by this device. */
 			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-			vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(vp->pdev, skb->tail, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
+			vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->tail, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 		}
 		if (i != RX_RING_SIZE) {
 			int j;
@@ -1978,7 +2046,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (vp->bus_master) {
 		/* Set the bus-master controller to transfer the packet. */
 		int len = (skb->len + 3) & ~3;
-		outl(	vp->tx_skb_dma = pci_map_single(vp->pdev, skb->data, len, PCI_DMA_TODEVICE),
+		outl(	vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
 				ioaddr + Wn7_MasterAddr);
 		outw(len, ioaddr + Wn7_MasterLen);
 		vp->tx_skb = skb;
@@ -2057,13 +2125,13 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum);

 	if (!skb_shinfo(skb)->nr_frags) {
-		vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(vp->pdev, skb->data,
+		vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data,
 										skb->len, PCI_DMA_TODEVICE));
 		vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG);
 	} else {
 		int i;

-		vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(vp->pdev, skb->data,
+		vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data,
 										skb->len-skb->data_len, PCI_DMA_TODEVICE));
 		vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len-skb->data_len);

@@ -2071,7 +2139,7 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];

 			vp->tx_ring[entry].frag[i+1].addr =
-					cpu_to_le32(pci_map_single(vp->pdev,
+					cpu_to_le32(pci_map_single(VORTEX_PCI(vp),
 											   (void*)page_address(frag->page) + frag->page_offset,
 											   frag->size, PCI_DMA_TODEVICE));

@@ -2082,7 +2150,7 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 	}
 #else
-	vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(vp->pdev, skb->data, skb->len, PCI_DMA_TODEVICE));
+	vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE));
 	vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG);
 	vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
 #endif
@@ -2170,7 +2238,7 @@ static void vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		if (status & DMADone) {
 			if (inw(ioaddr + Wn7_MasterStatus) & 0x1000) {
 				outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
-				pci_unmap_single(vp->pdev, vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE);
+				pci_unmap_single(VORTEX_PCI(vp), vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE);
 				dev_kfree_skb_irq(vp->tx_skb); /* Release the transferred buffer */
 				if (inw(ioaddr + TxFree) > 1536) {
 					/*
@@ -2291,12 +2359,12 @@ static void boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if DO_ZEROCOPY					
 					int i;
 					for (i=0; i<=skb_shinfo(skb)->nr_frags; i++)
-							pci_unmap_single(vp->pdev,
+							pci_unmap_single(VORTEX_PCI(vp),
 											 le32_to_cpu(vp->tx_ring[entry].frag[i].addr),
 											 le32_to_cpu(vp->tx_ring[entry].frag[i].length)&0xFFF,
 											 PCI_DMA_TODEVICE);
 #else
-					pci_unmap_single(vp->pdev,
+					pci_unmap_single(VORTEX_PCI(vp),
 						le32_to_cpu(vp->tx_ring[entry].addr), skb->len, PCI_DMA_TODEVICE);
 #endif
 					dev_kfree_skb_irq(skb);
@@ -2383,14 +2451,14 @@ static int vortex_rx(struct net_device *dev)
 				/* 'skb_put()' points to the start of sk_buff data area. */
 				if (vp->bus_master &&
 					! (inw(ioaddr + Wn7_MasterStatus) & 0x8000)) {
-					dma_addr_t dma = pci_map_single(vp->pdev, skb_put(skb, pkt_len),
+					dma_addr_t dma = pci_map_single(VORTEX_PCI(vp), skb_put(skb, pkt_len),
 									   pkt_len, PCI_DMA_FROMDEVICE);
 					outl(dma, ioaddr + Wn7_MasterAddr);
 					outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
 					outw(StartDMAUp, ioaddr + EL3_CMD);
 					while (inw(ioaddr + Wn7_MasterStatus) & 0x8000)
 						;
-					pci_unmap_single(vp->pdev, dma, pkt_len, PCI_DMA_FROMDEVICE);
+					pci_unmap_single(VORTEX_PCI(vp), dma, pkt_len, PCI_DMA_FROMDEVICE);
 				} else {
 					insl(ioaddr + RX_FIFO, skb_put(skb, pkt_len),
 						 (pkt_len + 3) >> 2);
@@ -2456,7 +2524,7 @@ boomerang_rx(struct net_device *dev)
 			if (pkt_len < rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != 0) {
 				skb->dev = dev;
 				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-				pci_dma_sync_single(vp->pdev, dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+				pci_dma_sync_single(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
 				/* 'skb_put()' points to the start of sk_buff data area. */
 				memcpy(skb_put(skb, pkt_len),
 					   vp->rx_skbuff[entry]->tail,
@@ -2467,7 +2535,7 @@ boomerang_rx(struct net_device *dev)
 				skb = vp->rx_skbuff[entry];
 				vp->rx_skbuff[entry] = NULL;
 				skb_put(skb, pkt_len);
-				pci_unmap_single(vp->pdev, dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+				pci_unmap_single(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
 				vp->rx_nocopy++;
 			}
 			skb->protocol = eth_type_trans(skb, dev);
@@ -2504,7 +2572,7 @@ boomerang_rx(struct net_device *dev)
 			}
 			skb->dev = dev;			/* Mark as being used by this device. */
 			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-			vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(vp->pdev, skb->tail, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
+			vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->tail, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 			vp->rx_skbuff[entry] = skb;
 		}
 		vp->rx_ring[entry].status = 0;	/* Clear complete bit. */
@@ -2563,8 +2631,8 @@ vortex_down(struct net_device *dev)
 	if (vp->full_bus_master_tx)
 		outl(0, ioaddr + DownListPtr);

-	if (vp->pdev && vp->enable_wol) {
-		pci_save_state(vp->pdev, vp->power_state);
+	if (VORTEX_PCI(vp) && vp->enable_wol) {
+		pci_save_state(VORTEX_PCI(vp), vp->power_state);
 		acpi_set_WOL(dev);
 	}
 }
@@ -2600,7 +2668,7 @@ vortex_close(struct net_device *dev)
 	if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
 		for (i = 0; i < RX_RING_SIZE; i++)
 			if (vp->rx_skbuff[i]) {
-				pci_unmap_single(	vp->pdev, le32_to_cpu(vp->rx_ring[i].addr),
+				pci_unmap_single(	VORTEX_PCI(vp), le32_to_cpu(vp->rx_ring[i].addr),
 									PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
 				dev_kfree_skb(vp->rx_skbuff[i]);
 				vp->rx_skbuff[i] = 0;
@@ -2614,12 +2682,12 @@ vortex_close(struct net_device *dev)
 				int k;

 				for (k=0; k<=skb_shinfo(skb)->nr_frags; k++)
-						pci_unmap_single(vp->pdev,
+						pci_unmap_single(VORTEX_PCI(vp),
 										 le32_to_cpu(vp->tx_ring[i].frag[k].addr),
 										 le32_to_cpu(vp->tx_ring[i].frag[k].length)&0xFFF,
 										 PCI_DMA_TODEVICE);
 #else
-				pci_unmap_single(vp->pdev, le32_to_cpu(vp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE);
+				pci_unmap_single(VORTEX_PCI(vp), le32_to_cpu(vp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE);
 #endif
 				dev_kfree_skb(skb);
 				vp->tx_skbuff[i] = 0;
@@ -2738,11 +2806,15 @@ static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
 		struct ethtool_drvinfo info = {ETHTOOL_GDRVINFO};
 		strcpy(info.driver, DRV_NAME);
 		strcpy(info.version, DRV_VERSION);
-		if (vp->pdev)
-			strcpy(info.bus_info, vp->pdev->slot_name);
-		else
-			sprintf(info.bus_info, "EISA 0x%lx %d",
-				dev->base_addr, dev->irq);
+		if (VORTEX_PCI(vp))
+			strcpy(info.bus_info, VORTEX_PCI(vp)->slot_name);
+		else {
+			if (VORTEX_EISA(vp))
+				sprintf (info.bus_info, vp->gendev->bus_id);
+			else
+				sprintf(info.bus_info, "EISA 0x%lx %d",
+						dev->base_addr, dev->irq);
+		}
 		if (copy_to_user(useraddr, &info, sizeof(info)))
 			return -EFAULT;
 		return 0;
@@ -2924,8 +2996,8 @@ static void acpi_set_WOL(struct net_device *dev)
 	outw(RxEnable, ioaddr + EL3_CMD);

 	/* Change the power state to D3; RxEnable doesn't take effect. */
-	pci_enable_wake(vp->pdev, 0, 1);
-	pci_set_power_state(vp->pdev, 3);
+	pci_enable_wake(VORTEX_PCI(vp), 0, 1);
+	pci_set_power_state(VORTEX_PCI(vp), 3);
 }


@@ -2935,7 +3007,7 @@ static void __devexit vortex_remove_one (struct pci_dev *pdev)
 	struct vortex_private *vp;

 	if (!dev) {
-		printk("vortex_remove_one called for EISA device!\n");
+		printk("vortex_remove_one called for Compaq device!\n");
 		BUG();
 	}

@@ -2949,10 +3021,10 @@ static void __devexit vortex_remove_one (struct pci_dev *pdev)
 	/* Should really use issue_and_wait() here */
 	outw(TotalReset|0x14, dev->base_addr + EL3_CMD);

-	if (vp->pdev && vp->enable_wol) {
-		pci_set_power_state(vp->pdev, 0);	/* Go active */
+	if (VORTEX_PCI(vp) && vp->enable_wol) {
+		pci_set_power_state(VORTEX_PCI(vp), 0);	/* Go active */
 		if (vp->pm_state_valid)
-			pci_restore_state(vp->pdev, vp->power_state);
+			pci_restore_state(VORTEX_PCI(vp), vp->power_state);
 	}

 	pci_free_consistent(pdev,
@@ -3000,24 +3072,23 @@ static int __init vortex_init (void)

 static void __exit vortex_eisa_cleanup (void)
 {
-	struct net_device *dev, *tmp;
 	struct vortex_private *vp;
 	long ioaddr;

-	dev = root_vortex_eisa_dev;
-
-	while (dev) {
-		vp = dev->priv;
-		ioaddr = dev->base_addr;
+#ifdef CONFIG_EISA
+	/* Take care of the EISA devices */
+	eisa_driver_unregister (&vortex_eisa_driver);
+#endif
+	
+	if (compaq_net_device) {
+		vp = compaq_net_device->priv;
+		ioaddr = compaq_net_device->base_addr;

-		unregister_netdev (dev);
+		unregister_netdev (compaq_net_device);
 		outw (TotalReset, ioaddr + EL3_CMD);
 		release_region (ioaddr, VORTEX_TOTAL_SIZE);

-		tmp = dev;
-		dev = vp->next_module;
-
-		kfree (tmp);
+		kfree (compaq_net_device);
 	}
 }


--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -55,7 +55,6 @@ extern int hp_probe(struct net_device *dev);
 extern int hp_plus_probe(struct net_device *dev);
 extern int express_probe(struct net_device *);
 extern int eepro_probe(struct net_device *);
-extern int el3_probe(struct net_device *);
 extern int at1500_probe(struct net_device *);
 extern int at1700_probe(struct net_device *);
 extern int fmv18x_probe(struct net_device *);
@@ -210,9 +209,6 @@ static struct devprobe mca_probes[] __initdata = {
 * look for EISA/PCI/MCA cards in addition to ISA cards).
 */
 static struct devprobe isa_probes[] __initdata = {
-#ifdef CONFIG_EL3		/* ISA, EISA, MCA 3c5x9 */
-	{el3_probe, 0},
-#endif
 #ifdef CONFIG_HP100 		/* ISA, EISA & PCI */
 	{hp100_probe, 0},
 #endif	

--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -54,6 +54,8 @@ config EISA
 	  supports both the Mongoose & Wax EISA adapters.  It is sadly
 	  incomplete and lacks support for card-to-host DMA.

+source "drivers/eisa/Kconfig"
+
 config ISA
 	bool
 	depends on EISA

--- a/include/linux/eisa.h
+++ b/include/linux/eisa.h
+#ifndef _LINUX_EISA_H
+#define _LINUX_EISA_H
+
+#define EISA_SIG_LEN   8
+#define EISA_MAX_SLOTS 8
+
+/* A few EISA constants/offsets... */
+
+#define EISA_DMA1_STATUS            8
+#define EISA_INT1_CTRL           0x20
+#define EISA_INT1_MASK           0x21
+#define EISA_INT2_CTRL           0xA0
+#define EISA_INT2_MASK           0xA1
+#define EISA_DMA2_STATUS         0xD0
+#define EISA_DMA2_WRITE_SINGLE   0xD4
+#define EISA_EXT_NMI_RESET_CTRL 0x461
+#define EISA_INT1_EDGE_LEVEL    0x4D0
+#define EISA_INT2_EDGE_LEVEL    0x4D1
+#define EISA_VENDOR_ID_OFFSET   0xC80
+
+/* The EISA signature, in ASCII form, null terminated */
+struct eisa_device_id {
+	char sig[EISA_SIG_LEN];
+};
+
+/* There is not much we can say about an EISA device, apart from
+ * signature, slot number, and base address */
+struct eisa_device {
+	struct eisa_device_id id;
+	int                   slot;
+	unsigned long         base_addr;
+	struct resource       res;
+	struct device         dev; /* generic device */
+};
+
+#define to_eisa_device(n) container_of(n, struct eisa_device, dev)
+
+struct eisa_driver {
+	const struct eisa_device_id *id_table;
+	struct device_driver         driver;
+};
+
+#define to_eisa_driver(drv) container_of(drv,struct eisa_driver, driver)
+
+extern struct bus_type eisa_bus_type;
+int eisa_driver_register (struct eisa_driver *edrv);
+void eisa_driver_unregister (struct eisa_driver *edrv);
+
+/* Mimics pci.h... */
+static inline void *eisa_get_drvdata (struct eisa_device *edev)
+{
+        return edev->dev.driver_data;
+}
+
+static inline void eisa_set_drvdata (struct eisa_device *edev, void *data)
+{
+        edev->dev.driver_data = data;
+}
+
+#endif