Commit 18a26892 authored by Hema HK's avatar Hema HK Committed by Felipe Balbi

OMAP2+: musb: hwmod adaptation for musb registration

Using omap_device_build API instead of platform_device_register for
OMAP2430,OMAP3xxx, OMAP4430 and AM35x musb device registration.
The device specific resources defined in centralized
database will be used.
Signed-off-by: default avatarHema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Cousson, Benoit <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 273ff8c3
...@@ -30,26 +30,11 @@ ...@@ -30,26 +30,11 @@
#include <mach/irqs.h> #include <mach/irqs.h>
#include <mach/am35xx.h> #include <mach/am35xx.h>
#include <plat/usb.h> #include <plat/usb.h>
#include <plat/omap_device.h>
#include "mux.h" #include "mux.h"
#if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X) #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
static struct resource musb_resources[] = {
[0] = { /* start and end set dynamically */
.flags = IORESOURCE_MEM,
},
[1] = { /* general IRQ */
.start = INT_243X_HS_USB_MC,
.flags = IORESOURCE_IRQ,
.name = "mc",
},
[2] = { /* DMA IRQ */
.start = INT_243X_HS_USB_DMA,
.flags = IORESOURCE_IRQ,
.name = "dma",
},
};
static struct musb_hdrc_config musb_config = { static struct musb_hdrc_config musb_config = {
.multipoint = 1, .multipoint = 1,
.dyn_fifo = 1, .dyn_fifo = 1,
...@@ -77,16 +62,12 @@ static struct musb_hdrc_platform_data musb_plat = { ...@@ -77,16 +62,12 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = DMA_BIT_MASK(32); static u64 musb_dmamask = DMA_BIT_MASK(32);
static struct platform_device musb_device = { static struct omap_device_pm_latency omap_musb_latency[] = {
.name = "musb-omap2430", {
.id = -1, .deactivate_func = omap_device_idle_hwmods,
.dev = { .activate_func = omap_device_enable_hwmods,
.dma_mask = &musb_dmamask, .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &musb_plat,
}, },
.num_resources = ARRAY_SIZE(musb_resources),
.resource = musb_resources,
}; };
static void usb_musb_mux_init(struct omap_musb_board_data *board_data) static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
...@@ -126,24 +107,20 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data) ...@@ -126,24 +107,20 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
break; break;
} }
} }
void __init usb_musb_init(struct omap_musb_board_data *board_data) void __init usb_musb_init(struct omap_musb_board_data *board_data)
{ {
if (cpu_is_omap243x()) { struct omap_hwmod *oh;
musb_resources[0].start = OMAP243X_HS_BASE; struct omap_device *od;
} else if (cpu_is_omap3517() || cpu_is_omap3505()) { struct platform_device *pdev;
musb_device.name = "musb-am35x"; struct device *dev;
musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE; int bus_id = -1;
musb_resources[1].start = INT_35XX_USBOTG_IRQ; const char *oh_name, *name;
} else if (cpu_is_omap34xx()) {
musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
} else if (cpu_is_omap44xx()) {
musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
if (cpu_is_omap3517() || cpu_is_omap3505()) {
} else if (cpu_is_omap44xx()) {
usb_musb_mux_init(board_data); usb_musb_mux_init(board_data);
} }
musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
/* /*
* REVISIT: This line can be removed once all the platforms using * REVISIT: This line can be removed once all the platforms using
...@@ -155,8 +132,35 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) ...@@ -155,8 +132,35 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
musb_plat.mode = board_data->mode; musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus; musb_plat.extvbus = board_data->extvbus;
if (platform_device_register(&musb_device) < 0) if (cpu_is_omap3517() || cpu_is_omap3505()) {
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); oh_name = "am35x_otg_hs";
name = "musb-am35x";
} else {
oh_name = "usb_otg_hs";
name = "musb-omap2430";
}
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
return;
}
od = omap_device_build(name, bus_id, oh, &musb_plat,
sizeof(musb_plat), omap_musb_latency,
ARRAY_SIZE(omap_musb_latency), false);
if (IS_ERR(od)) {
pr_err("Could not build omap_device for %s %s\n",
name, oh_name);
return;
}
pdev = &od->pdev;
dev = &pdev->dev;
get_device(dev);
dev->dma_mask = &musb_dmamask;
dev->coherent_dma_mask = musb_dmamask;
put_device(dev);
} }
#else #else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment