Merge tag 'clk-exynos-for-v3.10' of...

Merge tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add suppport common clock framework for exynos

* tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (73 commits)
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: exynos5250: register display block gate clocks to common clock framework
  clk: exynos4: Add support for SoC-specific register save list
  clk: exynos4: Add missing registers to suspend save list
  clk: exynos4: Remove E4X12 prefix from SRC_DMC register
  clk: exynos4: Add E4210 prefix to GATE_IP_PERIR register
  clk: exynos4: Add E4210 prefix to LCD1 clock registers
  clk: exynos4: Remove SoC-specific registers from save list
  clk: exynos4: Use SRC_MASK_PERIL{0,1} definitions
  clk: exynos4: Define {E,V}PLL registers
  clk: exynos4: Add missing mout_sata on Exynos4210
  clk: exynos4: Add missing CMU_TOP and ISP clocks
  clk: exynos4: Add G3D clocks
  clk: exynos4: Add camera related clock definitions
  clk: exynos4: Export mout_core clock of Exynos4210
  clk: samsung: Remove unimplemented ops for pll
  clk: exynos4: Export clocks used by exynos cpufreq drivers
  ...

[arnd: add missing #address-cells property in mshc DT node]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/clock/exynos4-clock.txt

+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+  - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+
+		 [Core Clocks]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  xxti                1
+  xusbxti             2
+  fin_pll             3
+  fout_apll           4
+  fout_mpll           5
+  fout_epll           6
+  fout_vpll           7
+  sclk_apll           8
+  sclk_mpll           9
+  sclk_epll           10
+  sclk_vpll           11
+  arm_clk             12
+  aclk200             13
+  aclk100             14
+  aclk160             15
+  aclk133             16
+  mout_mpll_user_t    17      Exynos4x12
+  mout_mpll_user_c    18      Exynos4x12
+  mout_core           19
+  mout_apll           20
+
+
+            [Clock Gate for Special Clocks]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  sclk_fimc0          128
+  sclk_fimc1          129
+  sclk_fimc2          130
+  sclk_fimc3          131
+  sclk_cam0           132
+  sclk_cam1           133
+  sclk_csis0          134
+  sclk_csis1          135
+  sclk_hdmi           136
+  sclk_mixer          137
+  sclk_dac            138
+  sclk_pixel          139
+  sclk_fimd0          140
+  sclk_mdnie0         141     Exynos4412
+  sclk_mdnie_pwm0 12  142     Exynos4412
+  sclk_mipi0          143
+  sclk_audio0         144
+  sclk_mmc0           145
+  sclk_mmc1           146
+  sclk_mmc2           147
+  sclk_mmc3           148
+  sclk_mmc4           149
+  sclk_sata           150     Exynos4210
+  sclk_uart0          151
+  sclk_uart1          152
+  sclk_uart2          153
+  sclk_uart3          154
+  sclk_uart4          155
+  sclk_audio1         156
+  sclk_audio2         157
+  sclk_spdif          158
+  sclk_spi0           159
+  sclk_spi1           160
+  sclk_spi2           161
+  sclk_slimbus        162
+  sclk_fimd1          163     Exynos4210
+  sclk_mipi1          164     Exynos4210
+  sclk_pcm1           165
+  sclk_pcm2           166
+  sclk_i2s1           167
+  sclk_i2s2           168
+  sclk_mipihsi        169     Exynos4412
+  sclk_mfc            170
+  sclk_pcm0           171
+  sclk_g3d            172
+  sclk_pwm_isp        173     Exynos4x12
+  sclk_spi0_isp       174     Exynos4x12
+  sclk_spi1_isp       175     Exynos4x12
+  sclk_uart_isp       176     Exynos4x12
+
+	      [Peripheral Clock Gates]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  fimc0               256
+  fimc1               257
+  fimc2               258
+  fimc3               259
+  csis0               260
+  csis1               261
+  jpeg                262
+  smmu_fimc0          263
+  smmu_fimc1          264
+  smmu_fimc2          265
+  smmu_fimc3          266
+  smmu_jpeg           267
+  vp                  268
+  mixer               269
+  tvenc               270     Exynos4210
+  hdmi                271
+  smmu_tv             272
+  mfc                 273
+  smmu_mfcl           274
+  smmu_mfcr           275
+  g3d                 276
+  g2d                 277     Exynos4210
+  rotator             278     Exynos4210
+  mdma                279     Exynos4210
+  smmu_g2d            280     Exynos4210
+  smmu_rotator        281     Exynos4210
+  smmu_mdma           282     Exynos4210
+  fimd0               283
+  mie0                284
+  mdnie0              285     Exynos4412
+  dsim0               286
+  smmu_fimd0          287
+  fimd1               288     Exynos4210
+  mie1                289     Exynos4210
+  dsim1               290     Exynos4210
+  smmu_fimd1          291     Exynos4210
+  pdma0               292
+  pdma1               293
+  pcie_phy            294
+  sata_phy            295     Exynos4210
+  tsi                 296
+  sdmmc0              297
+  sdmmc1              298
+  sdmmc2              299
+  sdmmc3              300
+  sdmmc4              301
+  sata                302     Exynos4210
+  sromc               303
+  usb_host            304
+  usb_device          305
+  pcie                306
+  onenand             307
+  nfcon               308
+  smmu_pcie           309
+  gps                 310
+  smmu_gps            311
+  uart0               312
+  uart1               313
+  uart2               314
+  uart3               315
+  uart4               316
+  i2c0                317
+  i2c1                318
+  i2c2                319
+  i2c3                320
+  i2c4                321
+  i2c5                322
+  i2c6                323
+  i2c7                324
+  i2c_hdmi            325
+  tsadc               326
+  spi0                327
+  spi1                328
+  spi2                329
+  i2s1                330
+  i2s2                331
+  pcm0                332
+  i2s0                333
+  pcm1                334
+  pcm2                335
+  pwm                 336
+  slimbus             337
+  spdif               338
+  ac97                339
+  modemif             340
+  chipid              341
+  sysreg              342
+  hdmi_cec            343
+  mct                 344
+  wdt                 345
+  rtc                 346
+  keyif               347
+  audss               348
+  mipi_hsi            349     Exynos4210
+  mdma2               350     Exynos4210
+  pixelasyncm0        351
+  pixelasyncm1        352
+  fimc_lite0          353     Exynos4x12
+  fimc_lite1          354     Exynos4x12
+  ppmuispx            355     Exynos4x12
+  ppmuispmx           356     Exynos4x12
+  fimc_isp            357     Exynos4x12
+  fimc_drc            358     Exynos4x12
+  fimc_fd             359     Exynos4x12
+  mcuisp              360     Exynos4x12
+  gicisp              361     Exynos4x12
+  smmu_isp            362     Exynos4x12
+  smmu_drc            363     Exynos4x12
+  smmu_fd             364     Exynos4x12
+  smmu_lite0          365     Exynos4x12
+  smmu_lite1          366     Exynos4x12
+  mcuctl_isp          367     Exynos4x12
+  mpwm_isp            368     Exynos4x12
+  i2c0_isp            369     Exynos4x12
+  i2c1_isp            370     Exynos4x12
+  mtcadc_isp          371     Exynos4x12
+  pwm_isp             372     Exynos4x12
+  wdt_isp             373     Exynos4x12
+  uart_isp            374     Exynos4x12
+  asyncaxim           375     Exynos4x12
+  smmu_ispcx          376     Exynos4x12
+  spi0_isp            377     Exynos4x12
+  spi1_isp            378     Exynos4x12
+  pwm_isp_sclk        379     Exynos4x12
+  spi0_isp_sclk       380     Exynos4x12
+  spi1_isp_sclk       381     Exynos4x12
+  uart_isp_sclk       382     Exynos4x12
+
+		[Mux Clocks]
+
+  Clock			ID	SoC (if specific)
+  -----------------------------------------------
+
+  mout_fimc0		384
+  mout_fimc1		385
+  mout_fimc2		386
+  mout_fimc3		387
+  mout_cam0		388
+  mout_cam1		389
+  mout_csis0		390
+  mout_csis1		391
+  mout_g3d0		392
+  mout_g3d1		393
+  mout_g3d		394
+  aclk400_mcuisp	395	Exynos4x12
+
+		[Div Clocks]
+
+  Clock			ID	SoC (if specific)
+  -----------------------------------------------
+
+  div_isp0		450	Exynos4x12
+  div_isp1		451	Exynos4x12
+  div_mcuisp0		452	Exynos4x12
+  div_mcuisp1		453	Exynos4x12
+  div_aclk200		454	Exynos4x12
+  div_aclk400_mcuisp	455	Exynos4x12
+
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
+	};

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

+* Samsung Exynos5250 Clock Controller
+
+The Exynos5250 clock controller generates and supplies clock to various
+controllers within the Exynos5250 SoC.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  fin_pll		1
+
+  [Clock Gate for Special Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  sclk_cam_bayer	128
+  sclk_cam0		129
+  sclk_cam1		130
+  sclk_gscl_wa		131
+  sclk_gscl_wb		132
+  sclk_fimd1		133
+  sclk_mipi1		134
+  sclk_dp		135
+  sclk_hdmi		136
+  sclk_pixel		137
+  sclk_audio0		138
+  sclk_mmc0		139
+  sclk_mmc1		140
+  sclk_mmc2		141
+  sclk_mmc3		142
+  sclk_sata		143
+  sclk_usb3		144
+  sclk_jpeg		145
+  sclk_uart0		146
+  sclk_uart1		147
+  sclk_uart2		148
+  sclk_uart3		149
+  sclk_pwm		150
+  sclk_audio1		151
+  sclk_audio2		152
+  sclk_spdif		153
+  sclk_spi0		154
+  sclk_spi1		155
+  sclk_spi2		156
+
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  gscl0			256
+  gscl1			257
+  gscl2			258
+  gscl3			259
+  gscl_wa		260
+  gscl_wb		261
+  smmu_gscl0		262
+  smmu_gscl1		263
+  smmu_gscl2		264
+  smmu_gscl3		265
+  mfc			266
+  smmu_mfcl		267
+  smmu_mfcr		268
+  rotator		269
+  jpeg			270
+  mdma1			271
+  smmu_rotator		272
+  smmu_jpeg		273
+  smmu_mdma1		274
+  pdma0			275
+  pdma1			276
+  sata			277
+  usbotg		278
+  mipi_hsi		279
+  sdmmc0		280
+  sdmmc1		281
+  sdmmc2		282
+  sdmmc3		283
+  sromc			284
+  usb2			285
+  usb3			286
+  sata_phyctrl		287
+  sata_phyi2c		288
+  uart0			289
+  uart1			290
+  uart2			291
+  uart3			292
+  uart4			293
+  i2c0			294
+  i2c1			295
+  i2c2			296
+  i2c3			297
+  i2c4			298
+  i2c5			299
+  i2c6			300
+  i2c7			301
+  i2c_hdmi		302
+  adc			303
+  spi0			304
+  spi1			305
+  spi2			306
+  i2s1			307
+  i2s2			308
+  pcm1			309
+  pcm2			310
+  pwm			311
+  spdif			312
+  ac97			313
+  hsi2c0		314
+  hsi2c1		315
+  hs12c2		316
+  hs12c3		317
+  chipid		318
+  sysreg		319
+  pmu			320
+  cmu_top		321
+  cmu_core		322
+  cmu_mem		323
+  tzpc0			324
+  tzpc1			325
+  tzpc2			326
+  tzpc3			327
+  tzpc4			328
+  tzpc5			329
+  tzpc6			330
+  tzpc7			331
+  tzpc8			332
+  tzpc9			333
+  hdmi_cec		334
+  mct			335
+  wdt			336
+  rtc			337
+  tmu			338
+  fimd1			339
+  mie1			340
+  dsim0			341
+  dp			342
+  mixer			343
+  hdmi			345
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5250-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
+	};

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  xtal			1
+  arm_clk		2
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  spi_baud		16
+  pb0_250		17
+  pr0_250		18
+  pr1_250		19
+  b_250			20
+  b_125			21
+  b_200			22
+  sata			23
+  usb			24
+  gmac0			25
+  cs250			26
+  pb0_250_o		27
+  pr0_250_o		28
+  pr1_250_o		29
+  b_250_o		30
+  b_125_o		31
+  b_200_o		32
+  sata_o		33
+  usb_o			34
+  gmac0_o		35
+  cs250_o		36
+
+Example: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x10000>;
+		#clock-cells = <1>;
+	};

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -21,3 +21,24 @@ Required properties:
 
   - samsung,mfc-l : Base address of the second memory bank used by MFC
 		    for DMA contiguous memory allocation and its size.
+
+Optional properties:
+  - samsung,power-domain : power-domain property defined with a phandle
+			   to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+	compatible = "samsung,mfc-v5";
+	reg = <0x13400000 0x10000>;
+	interrupts = <0 94 0>;
+	samsung,power-domain = <&pd_mfc>;
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};

Documentation/devicetree/bindings/usb/exynos-usb.txt

+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+   EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+
+Optional properties:
+ - samsung,vbus-gpio:  if present, specifies the GPIO that
+   needs to be pulled up for the bus to be powered.
+
+Example:
+
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+   OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+
+Example:
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+	};

arch/arm/Kconfig

@@ -866,6 +866,7 @@ config ARCH_EXYNOS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK

arch/arm/boot/dts/Makefile

@@ -42,7 +42,10 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
+	exynos4412-odroidx.dtb \
 	exynos4412-smdk4412.dtb \
+	exynos4412-origen.dtb \
+	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5440-ssdk5440.dtb

arch/arm/boot/dts/cros5250-common.dtsi

@@ -24,6 +24,144 @@ i2c@12C60000 {
 		samsung,i2c-max-bus-freq = <378000>;
 		gpios = <&gpb3 0 2 3 0>,
 			<&gpb3 1 2 3 0>;
+
+		max77686@09 {
+			compatible = "maxim,max77686";
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "P1.0V_LDO_OUT1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "P1.8V_LDO_OUT2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "P1.8V_LDO_OUT3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "P1.1V_LDO_OUT7";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "P1.0V_LDO_OUT8";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "P1.8V_LDO_OUT10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "P3.0V_LDO_OUT12";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "P1.8V_LDO_OUT14";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "P1.0V_LDO_OUT15";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "P1.8V_LDO_OUT16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "P1.8V_BUCK_OUT5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "P1.35V_BUCK_OUT6";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "P2.0V_BUCK_OUT7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "P2.85V_BUCK_OUT8";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+			};
+		};
 	};
 
 	i2c@12C70000 {

arch/arm/boot/dts/exynos4.dtsi

@@ -86,6 +86,8 @@ watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
+		clocks = <&clock 345>;
+		clock-names = "watchdog";
 		status = "disabled";
 	};
 
@@ -93,6 +95,8 @@ rtc@10070000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <0 44 0>, <0 45 0>;
+		clocks = <&clock 346>;
+		clock-names = "rtc";
 		status = "disabled";
 	};
 
@@ -100,6 +104,8 @@ keypad@100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
+		clocks = <&clock 347>;
+		clock-names = "keypad";
 		status = "disabled";
 	};
 
@@ -107,6 +113,8 @@ sdhci@12510000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
+		clocks = <&clock 297>, <&clock 145>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -114,6 +122,8 @@ sdhci@12520000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
+		clocks = <&clock 298>, <&clock 146>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -121,6 +131,8 @@ sdhci@12530000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
+		clocks = <&clock 299>, <&clock 147>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -128,6 +140,16 @@ sdhci@12540000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
+		clocks = <&clock 300>, <&clock 148>;
+		clock-names = "hsmmc", "mmc_busclk.2";
+		status = "disabled";
+	};
+
+	mfc: codec@13400000 {
+		compatible = "samsung,mfc-v5";
+		reg = <0x13400000 0x10000>;
+		interrupts = <0 94 0>;
+		samsung,power-domain = <&pd_mfc>;
 		status = "disabled";
 	};
 
@@ -135,6 +157,8 @@ serial@13800000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
 		interrupts = <0 52 0>;
+		clocks = <&clock 312>, <&clock 151>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -142,6 +166,8 @@ serial@13810000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
 		interrupts = <0 53 0>;
+		clocks = <&clock 313>, <&clock 152>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -149,6 +175,8 @@ serial@13820000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -156,6 +184,8 @@ serial@13830000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
 		interrupts = <0 55 0>;
+		clocks = <&clock 315>, <&clock 154>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -165,6 +195,8 @@ i2c_0: i2c@13860000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
+		clocks = <&clock 317>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -174,6 +206,8 @@ i2c_1: i2c@13870000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
 		interrupts = <0 59 0>;
+		clocks = <&clock 318>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -183,6 +217,8 @@ i2c_2: i2c@13880000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
 		interrupts = <0 60 0>;
+		clocks = <&clock 319>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -192,6 +228,8 @@ i2c_3: i2c@13890000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
 		interrupts = <0 61 0>;
+		clocks = <&clock 320>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -201,6 +239,8 @@ i2c_4: i2c@138A0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
 		interrupts = <0 62 0>;
+		clocks = <&clock 321>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -210,6 +250,8 @@ i2c_5: i2c@138B0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
 		interrupts = <0 63 0>;
+		clocks = <&clock 322>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -219,6 +261,8 @@ i2c_6: i2c@138C0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
 		interrupts = <0 64 0>;
+		clocks = <&clock 323>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -228,6 +272,8 @@ i2c_7: i2c@138D0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
 		interrupts = <0 65 0>;
+		clocks = <&clock 324>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -239,6 +285,8 @@ spi_0: spi@13920000 {
 		rx-dma-channel = <&pdma0 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 327>, <&clock 159>;
+		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
 
@@ -250,6 +298,8 @@ spi_1: spi@13930000 {
 		rx-dma-channel = <&pdma1 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 328>, <&clock 160>;
+		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
 
@@ -261,6 +311,8 @@ spi_2: spi@13940000 {
 		rx-dma-channel = <&pdma0 8>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 329>, <&clock 161>;
+		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
 
@@ -275,6 +327,8 @@ pdma0: pdma@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 292>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -284,6 +338,8 @@ pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
+			clocks = <&clock 293>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -293,6 +349,8 @@ mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 279>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;

arch/arm/boot/dts/exynos4210-origen.dts

@@ -57,6 +57,12 @@ sdhci@12510000 {
 		status = "okay";
 	};
 
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -121,4 +127,16 @@ status {
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210-smdkv310.dts

@@ -43,6 +43,12 @@ sdhci@12530000 {
 		status = "okay";
 	};
 
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -189,4 +195,16 @@ partition@40000 {
 			};
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <12000000>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210-trats.dts

@@ -289,4 +289,16 @@ safe2_sreg: ESAFEOUT2 {
 			};
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210.dtsi

@@ -55,6 +55,8 @@ mct@10050000 {
 		interrupt-parent = <&mct_map>;
 		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
 			     <4 0>, <5 0>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
 			#interrupt-cells = <2>;
@@ -69,6 +71,12 @@ mct_map: mct-map {
 		};
 	};
 
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;

arch/arm/boot/dts/exynos4412-odroidx.dts

+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X board based on Exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led2 {
+			label = "led2:mmc0";
+			gpios = <&gpc1 2 1>;
+			default-state = "on";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	mshc@12550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	regulator_p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpa1 1 1>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos4412-smdk4412.dts

@@ -27,6 +27,19 @@ chosen {
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};
 
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -42,4 +55,16 @@ serial@13820000 {
 	serial@13830000 {
 		status = "okay";
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4412.dtsi

@@ -34,6 +34,8 @@ mct@10050000 {
 		interrupt-parent = <&mct_map>;
 		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
 			     <4 0>, <5 0>, <6 0>, <7 0>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
 			#interrupt-cells = <2>;

arch/arm/boot/dts/exynos4x12.dtsi

@@ -36,6 +36,12 @@ combiner:interrupt-controller@10440000 {
 			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
 	};
 
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4412-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;

arch/arm/boot/dts/exynos5250-arndale.dts

+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "Insignal Arndale evaluation board based on EXYNOS5250";
+	compatible = "insignal,arndale", "samsung,exynos5250";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	i2c@12C60000 {
+		status = "disabled";
+	};
+
+	i2c@12C70000 {
+		status = "disabled";
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
+
+	i2c@121D0000 {
+		status = "disabled";
+	};
+
+	dwmmc_0: dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>,
+				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>;
+		};
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+		};
+	};
+
+	dwmmc_3: dwmmc3@12230000 {
+		status = "disabled";
+	};
+
+	spi_0: spi@12d20000 {
+		status = "disabled";
+	};
+
+	spi_1: spi@12d30000 {
+		status = "disabled";
+	};
+
+	spi_2: spi@12d40000 {
+		status = "disabled";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -231,4 +231,24 @@ sound {
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&wm8994>;
 	};
+
+	usb@12110000 {
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};
+
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos5250-snow.dts

@@ -40,4 +40,15 @@ slot@0 {
 				<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
 		};
 	};
+
+	usb@12110000 {
+		samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -46,6 +46,22 @@ aliases {
 		i2c8 = &i2c_8;
 	};
 
+	pd_gsc: gsc-power-domain@0x10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	pd_mfc: mfc-power-domain@0x10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+	};
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5250-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
 	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
@@ -77,6 +93,8 @@ mct@101C0000 {
 		interrupt-parent = <&mct_map>;
 		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
 			     <4 0>, <5 0>;
+		clocks = <&clock 1>, <&clock 335>;
+		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
 			#interrupt-cells = <2>;
@@ -95,54 +113,71 @@ watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x101D0000 0x100>;
 		interrupts = <0 42 0>;
+		clocks = <&clock 336>;
+		clock-names = "watchdog";
 	};
 
 	codec@11000000 {
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
+		samsung,power-domain = <&pd_mfc>;
 	};
 
 	rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;
+		clocks = <&clock 337>;
+		clock-names = "rtc";
 	};
 
 	tmu@10060000 {
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
+		clocks = <&clock 338>;
+		clock-names = "tmu_apbif";
 	};
 
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 51 0>;
+		clocks = <&clock 289>, <&clock 146>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C10000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C10000 0x100>;
 		interrupts = <0 52 0>;
+		clocks = <&clock 290>, <&clock 147>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C20000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C20000 0x100>;
 		interrupts = <0 53 0>;
+		clocks = <&clock 291>, <&clock 148>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C30000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C30000 0x100>;
 		interrupts = <0 54 0>;
+		clocks = <&clock 292>, <&clock 149>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	sata@122F0000 {
 		compatible = "samsung,exynos5-sata-ahci";
 		reg = <0x122F0000 0x1ff>;
 		interrupts = <0 115 0>;
+		clocks = <&clock 277>, <&clock 143>;
+		clock-names = "sata", "sclk_sata";
 	};
 
 	sata-phy@12170000 {
@@ -156,6 +191,8 @@ i2c_0: i2c@12C60000 {
 		interrupts = <0 56 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 294>;
+		clock-names = "i2c";
 	};
 
 	i2c_1: i2c@12C70000 {
@@ -164,6 +201,8 @@ i2c_1: i2c@12C70000 {
 		interrupts = <0 57 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 295>;
+		clock-names = "i2c";
 	};
 
 	i2c_2: i2c@12C80000 {
@@ -172,6 +211,8 @@ i2c_2: i2c@12C80000 {
 		interrupts = <0 58 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 296>;
+		clock-names = "i2c";
 	};
 
 	i2c_3: i2c@12C90000 {
@@ -180,6 +221,8 @@ i2c_3: i2c@12C90000 {
 		interrupts = <0 59 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 297>;
+		clock-names = "i2c";
 	};
 
 	i2c_4: i2c@12CA0000 {
@@ -188,6 +231,8 @@ i2c_4: i2c@12CA0000 {
 		interrupts = <0 60 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 298>;
+		clock-names = "i2c";
 	};
 
 	i2c_5: i2c@12CB0000 {
@@ -196,6 +241,8 @@ i2c_5: i2c@12CB0000 {
 		interrupts = <0 61 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 299>;
+		clock-names = "i2c";
 	};
 
 	i2c_6: i2c@12CC0000 {
@@ -204,6 +251,8 @@ i2c_6: i2c@12CC0000 {
 		interrupts = <0 62 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 300>;
+		clock-names = "i2c";
 	};
 
 	i2c_7: i2c@12CD0000 {
@@ -212,6 +261,8 @@ i2c_7: i2c@12CD0000 {
 		interrupts = <0 63 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 301>;
+		clock-names = "i2c";
 	};
 
 	i2c_8: i2c@12CE0000 {
@@ -220,6 +271,8 @@ i2c_8: i2c@12CE0000 {
 		interrupts = <0 64 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 302>;
+		clock-names = "i2c";
 	};
 
 	i2c@121D0000 {
@@ -227,6 +280,8 @@ i2c@121D0000 {
                 reg = <0x121D0000 0x100>;
                 #address-cells = <1>;
                 #size-cells = <0>;
+		clocks = <&clock 288>;
+		clock-names = "i2c";
 	};
 
 	spi_0: spi@12d20000 {
@@ -238,6 +293,8 @@ spi_0: spi@12d20000 {
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 304>, <&clock 154>;
+		clock-names = "spi", "spi_busclk0";
 	};
 
 	spi_1: spi@12d30000 {
@@ -249,6 +306,8 @@ spi_1: spi@12d30000 {
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 305>, <&clock 155>;
+		clock-names = "spi", "spi_busclk0";
 	};
 
 	spi_2: spi@12d40000 {
@@ -260,6 +319,8 @@ spi_2: spi@12d40000 {
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 306>, <&clock 156>;
+		clock-names = "spi", "spi_busclk0";
 	};
 
 	dwmmc_0: dwmmc0@12200000 {
@@ -268,6 +329,8 @@ dwmmc_0: dwmmc0@12200000 {
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 280>, <&clock 139>;
+		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_1: dwmmc1@12210000 {
@@ -276,6 +339,8 @@ dwmmc_1: dwmmc1@12210000 {
 		interrupts = <0 76 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 281>, <&clock 140>;
+		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_2: dwmmc2@12220000 {
@@ -284,6 +349,8 @@ dwmmc_2: dwmmc2@12220000 {
 		interrupts = <0 77 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 282>, <&clock 141>;
+		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_3: dwmmc3@12230000 {
@@ -292,6 +359,8 @@ dwmmc_3: dwmmc3@12230000 {
 		interrupts = <0 78 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 283>, <&clock 142>;
+		clock-names = "biu", "ciu";
 	};
 
 	i2s0: i2s@03830000 {
@@ -323,6 +392,18 @@ i2s2: i2s@12D70000 {
 		dma-names = "tx", "rx";
 	};
 
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+	};
+
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -334,6 +415,8 @@ pdma0: pdma@121A0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 275>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -343,6 +426,8 @@ pdma1: pdma@121B0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 276>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -352,6 +437,8 @@ mdma0: mdma@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
+			clocks = <&clock 271>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
@@ -361,6 +448,8 @@ mdma1: mdma@11C10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
+			clocks = <&clock 271>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
@@ -614,34 +703,51 @@ gpz: gpio-controller@03860000 {
 		};
 	};
 
+
 	gsc_0:  gsc@0x13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 256>;
+		clock-names = "gscl";
 	};
 
 	gsc_1:  gsc@0x13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 257>;
+		clock-names = "gscl";
 	};
 
 	gsc_2:  gsc@0x13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 258>;
+		clock-names = "gscl";
 	};
 
 	gsc_3:  gsc@0x13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 259>;
+		clock-names = "gscl";
 	};
 
 	hdmi {
 		compatible = "samsung,exynos5-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
+		clocks = <&clock 333>, <&clock 136>, <&clock 137>,
+				<&clock 333>, <&clock 333>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "hdmiphy";
 	};
 
 	mixer {
@@ -649,4 +755,18 @@ mixer {
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
 	};
+
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x1000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dptx-phy {
+			reg = <0x10040720>;
+			samsung,enable-mask = <1>;
+		};
+	};
 };

arch/arm/boot/dts/exynos5440-ssdk5440.dts

@@ -28,19 +28,10 @@ spi {
 		status = "disabled";
 	};
 
-	i2c@F0000 {
-		status = "disabled";
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
 		};
-
-	i2c@100000 {
-		status = "disabled";
-	};
-
-	watchdog {
-		status = "disabled";
-	};
-
-	rtc {
-		status = "disabled";
 	};
 };

arch/arm/boot/dts/exynos5440.dtsi

@@ -16,6 +16,12 @@ / {
 
 	interrupt-parent = <&gic>;
 
+	clock: clock-controller@0x160000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic:interrupt-controller@2E0000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
@@ -24,55 +30,51 @@ gic:interrupt-controller@2E0000 {
 	};
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 13 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <0>;
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <1>;
 		};
 		cpu@2 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <2>;
 		};
 		cpu@3 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
+			reg = <3>;
 		};
 	};
-	};
-
-	common {
-		compatible = "samsung,exynos5440";
 
+	timer {
+		compatible = "arm,cortex-a15-timer",
+			     "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <50000000>;
 	};
 
 	serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
 		interrupts = <0 2 0>;
+		clocks = <&clock 21>, <&clock 21>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@C0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
 		interrupts = <0 3 0>;
+		clocks = <&clock 21>, <&clock 21>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	spi {
@@ -83,6 +85,8 @@ spi {
 		rx-dma-channel = <&pdma0 4>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>, <&clock 16>;
+		clock-names = "spi", "spi_busclk0";
 	};
 
 	pinctrl {
@@ -110,25 +114,31 @@ uart1: uart1 {
 	};
 
 	i2c@F0000 {
-		compatible = "samsung,s3c2440-i2c";
+		compatible = "samsung,exynos5440-i2c";
 		reg = <0xF0000 0x1000>;
 		interrupts = <0 5 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>;
+		clock-names = "i2c";
 	};
 
 	i2c@100000 {
-		compatible = "samsung,s3c2440-i2c";
+		compatible = "samsung,exynos5440-i2c";
 		reg = <0x100000 0x1000>;
 		interrupts = <0 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>;
+		clock-names = "i2c";
 	};
 
 	watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
 		interrupts = <0 1 0>;
+		clocks = <&clock 21>;
+		clock-names = "watchdog";
 	};
 
 	amba {
@@ -142,6 +152,8 @@ pdma0: pdma@121A0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x120000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 21>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -151,6 +163,8 @@ pdma1: pdma@121B0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 21>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -161,5 +175,7 @@ rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
 		interrupts = <0 17 0>, <0 16 0>;
+		clocks = <&clock 21>;
+		clock-names = "rtc";
 	};
 };

arch/arm/mach-exynos/Kconfig

@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select S5P_DEV_MFC
@@ -405,6 +406,7 @@ config MACH_EXYNOS4_DT
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
 	select PINCTRL_EXYNOS
+	select S5P_DEV_MFC
 	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.

arch/arm/mach-exynos/Makefile

@@ -13,10 +13,6 @@ obj-				:=
 # Core
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= clock-exynos4.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
-obj-$(CONFIG_SOC_EXYNOS5250)	+= clock-exynos5.o
 
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o

arch/arm/mach-exynos/clock-exynos4.h

-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk exynos4_clk_aclk_133;
-extern struct clksrc_clk exynos4_clk_mout_mpll;
-
-extern struct clksrc_sources exynos4_clkset_mout_corebus;
-extern struct clksrc_sources exynos4_clkset_group;
-
-extern struct clk *exynos4_clkset_aclk_top_list[];
-extern struct clk *exynos4_clkset_group_list[];
-
-extern struct clksrc_sources exynos4_clkset_mout_g2d0;
-extern struct clksrc_sources exynos4_clkset_mout_g2d1;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */

arch/arm/mach-exynos/clock-exynos4210.c

-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4210_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clksrc_clk *sysclks[] = {
-	/* nothing here yet */
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d0 = {
-	.clk	= {
-		.name		= "mout_g2d0",
-	},
-	.sources = &exynos4_clkset_mout_g2d0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d1 = {
-	.clk	= {
-		.name		= "mout_g2d1",
-	},
-	.sources = &exynos4_clkset_mout_g2d1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4210_clkset_mout_g2d_list[] = {
-	[0] = &exynos4210_clk_mout_g2d0.clk,
-	[1] = &exynos4210_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4210_clkset_mout_g2d = {
-	.sources	= exynos4210_clkset_mout_g2d_list,
-	.nr_sources	= ARRAY_SIZE(exynos4210_clkset_mout_g2d_list),
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk		= {
-			.name		= "sclk_sata",
-			.id		= -1,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_mout_corebus,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimg2d",
-		},
-		.sources = &exynos4210_clkset_mout_g2d,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
-	},
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sataphy",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sata",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.9",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.11",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "fimg2d",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
-	return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4210_clock_syscore_ops = {
-	.suspend	= exynos4210_clock_suspend,
-	.resume		= exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
-	int ptr;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
-	exynos4_clk_mout_mpll.reg_src.shift = 8;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4210_clock_syscore_ops);
-}

arch/arm/mach-exynos/clock-exynos4212.c

-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4212 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4212_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
-};
-#endif
-
-static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static struct clk *clk_src_mpll_user_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_mpll_user = {
-	.sources	= clk_src_mpll_user_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk clk_mout_mpll_user = {
-	.clk = {
-		.name		= "mout_mpll_user",
-	},
-	.sources	= &clk_src_mpll_user,
-	.reg_src	= { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d0 = {
-	.clk	= {
-		.name		= "mout_g2d0",
-	},
-	.sources = &exynos4_clkset_mout_g2d0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d1 = {
-	.clk	= {
-		.name		= "mout_g2d1",
-	},
-	.sources = &exynos4_clkset_mout_g2d1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos4x12_clkset_mout_g2d_list[] = {
-	[0] = &exynos4x12_clk_mout_g2d0.clk,
-	[1] = &exynos4x12_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4x12_clkset_mout_g2d = {
-	.sources	= exynos4x12_clkset_mout_g2d_list,
-	.nr_sources	= ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list),
-};
-
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_mpll_user,
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_fimg2d",
-		},
-		.sources = &exynos4x12_clkset_mout_g2d,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 },
-	},
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.9",
-		.enable		= exynos4_clk_ip_dmc_ctrl,
-		.ctrlbit	= (1 << 24),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.12",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (7 << 8),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.13",
-		.enable		= exynos4212_clk_ip_isp1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.14",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.15",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "flite",
-		.devname	= "exynos-fimc-lite.0",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "flite",
-		.devname	= "exynos-fimc-lite.1",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "fimg2d",
-		.enable		= exynos4_clk_ip_dmc_ctrl,
-		.ctrlbit	= (1 << 23),
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4212_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-
-	return 0;
-}
-
-static void exynos4212_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-}
-
-#else
-#define exynos4212_clock_suspend NULL
-#define exynos4212_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4212_clock_syscore_ops = {
-	.suspend	= exynos4212_clock_suspend,
-	.resume		= exynos4212_clock_resume,
-};
-
-void __init exynos4212_register_clocks(void)
-{
-	int ptr;
-
-	/* usbphy1 is removed */
-	exynos4_clkset_group_list[4] = NULL;
-
-	/* mout_mpll_user is used */
-	exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
-	exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
-	exynos4_clk_mout_mpll.reg_src.shift = 12;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4212_clock_syscore_ops);
-}

arch/arm/mach-exynos/common.c

@@ -25,6 +25,8 @@
 #include <linux/irqdomain.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
+#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
 #include <linux/irqchip/arm-gic.h>
 
 #include <asm/proc-fns.h>
@@ -39,7 +41,6 @@
 #include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/sdhci.h>
@@ -65,17 +66,16 @@ static const char name_exynos5440[] = "EXYNOS5440";
 static void exynos4_map_io(void);
 static void exynos5_map_io(void);
 static void exynos5440_map_io(void);
-static void exynos4_init_clocks(int xtal);
-static void exynos5_init_clocks(int xtal);
 static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 static int exynos_init(void);
 
+unsigned long xxti_f = 0, xusbxti_f = 0;
+
 static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= EXYNOS4210_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4210,
@@ -83,7 +83,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS4212_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4212,
@@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS4412_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4412,
@@ -99,7 +97,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS5250_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
 		.map_io		= exynos5_map_io,
-		.init_clocks	= exynos5_init_clocks,
 		.init		= exynos_init,
 		.name		= name_exynos5250,
 	}, {
@@ -397,43 +394,26 @@ static void __init exynos5_map_io(void)
 	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
 }
 
-static void __init exynos4_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	if (soc_is_exynos4210())
-		exynos4210_register_clocks();
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		exynos4212_register_clocks();
-
-	exynos4_register_clocks();
-	exynos4_setup_clocks();
-}
-
 static void __init exynos5440_map_io(void)
 {
 	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
 }
 
-static void __init exynos5_init_clocks(int xtal)
+void __init exynos_init_time(void)
 {
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	/* EXYNOS5440 can support only common clock framework */
-
-	if (soc_is_exynos5440())
-		return;
-
-#ifdef CONFIG_SOC_EXYNOS5250
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	exynos5_register_clocks();
-	exynos5_setup_clocks();
+	if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
+		of_clk_init(NULL);
+		clocksource_of_init();
+#endif
+	} else {
+		/* todo: remove after migrating legacy E4 platforms to dt */
+#ifdef CONFIG_ARCH_EXYNOS4
+		exynos4_clk_init(NULL);
+		exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
 #endif
+		mct_init();
+	}
 }
 
 void __init exynos4_init_irq(void)

arch/arm/mach-exynos/common.h

@@ -12,7 +12,11 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
+#include <linux/of.h>
+
 extern void mct_init(void);
+void exynos_init_time(void);
+extern unsigned long xxti_f, xusbxti_f;
 
 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);
@@ -22,6 +26,10 @@ void exynos4_restart(char mode, const char *cmd);
 void exynos5_restart(char mode, const char *cmd);
 void exynos_init_late(void);
 
+/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
+void exynos4_clk_init(struct device_node *np);
+void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
+
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else

arch/arm/mach-exynos/include/mach/regs-clock.h

@@ -256,113 +256,6 @@
 #define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT		(0)
 #define EXYNOS4_CLKDIV_CAM1_JPEG_MASK		(0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
 
-/* For EXYNOS5250 */
-
-#define EXYNOS5_APLL_LOCK			EXYNOS_CLKREG(0x00000)
-#define EXYNOS5_APLL_CON0			EXYNOS_CLKREG(0x00100)
-#define EXYNOS5_CLKSRC_CPU			EXYNOS_CLKREG(0x00200)
-#define EXYNOS5_CLKMUX_STATCPU			EXYNOS_CLKREG(0x00400)
-#define EXYNOS5_CLKDIV_CPU0			EXYNOS_CLKREG(0x00500)
-#define EXYNOS5_CLKDIV_CPU1			EXYNOS_CLKREG(0x00504)
-#define EXYNOS5_CLKDIV_STATCPU0			EXYNOS_CLKREG(0x00600)
-#define EXYNOS5_CLKDIV_STATCPU1			EXYNOS_CLKREG(0x00604)
-
-#define EXYNOS5_PWR_CTRL1			EXYNOS_CLKREG(0x01020)
-#define EXYNOS5_PWR_CTRL2			EXYNOS_CLKREG(0x01024)
-
-#define EXYNOS5_MPLL_CON0			EXYNOS_CLKREG(0x04100)
-#define EXYNOS5_CLKSRC_CORE1			EXYNOS_CLKREG(0x04204)
-
-#define EXYNOS5_CLKGATE_IP_CORE			EXYNOS_CLKREG(0x04900)
-
-#define EXYNOS5_CLKDIV_ACP			EXYNOS_CLKREG(0x08500)
-
-#define EXYNOS5_EPLL_CON0			EXYNOS_CLKREG(0x10130)
-#define EXYNOS5_EPLL_CON1			EXYNOS_CLKREG(0x10134)
-#define EXYNOS5_EPLL_CON2			EXYNOS_CLKREG(0x10138)
-#define EXYNOS5_VPLL_CON0			EXYNOS_CLKREG(0x10140)
-#define EXYNOS5_VPLL_CON1			EXYNOS_CLKREG(0x10144)
-#define EXYNOS5_VPLL_CON2			EXYNOS_CLKREG(0x10148)
-#define EXYNOS5_CPLL_CON0			EXYNOS_CLKREG(0x10120)
-
-#define EXYNOS5_CLKSRC_TOP0			EXYNOS_CLKREG(0x10210)
-#define EXYNOS5_CLKSRC_TOP1			EXYNOS_CLKREG(0x10214)
-#define EXYNOS5_CLKSRC_TOP2			EXYNOS_CLKREG(0x10218)
-#define EXYNOS5_CLKSRC_TOP3			EXYNOS_CLKREG(0x1021C)
-#define EXYNOS5_CLKSRC_GSCL			EXYNOS_CLKREG(0x10220)
-#define EXYNOS5_CLKSRC_DISP1_0			EXYNOS_CLKREG(0x1022C)
-#define EXYNOS5_CLKSRC_MAUDIO			EXYNOS_CLKREG(0x10240)
-#define EXYNOS5_CLKSRC_FSYS			EXYNOS_CLKREG(0x10244)
-#define EXYNOS5_CLKSRC_PERIC0			EXYNOS_CLKREG(0x10250)
-#define EXYNOS5_CLKSRC_PERIC1			EXYNOS_CLKREG(0x10254)
-#define EXYNOS5_SCLK_SRC_ISP			EXYNOS_CLKREG(0x10270)
-
-#define EXYNOS5_CLKSRC_MASK_TOP			EXYNOS_CLKREG(0x10310)
-#define EXYNOS5_CLKSRC_MASK_GSCL		EXYNOS_CLKREG(0x10320)
-#define EXYNOS5_CLKSRC_MASK_DISP1_0		EXYNOS_CLKREG(0x1032C)
-#define EXYNOS5_CLKSRC_MASK_MAUDIO		EXYNOS_CLKREG(0x10334)
-#define EXYNOS5_CLKSRC_MASK_FSYS		EXYNOS_CLKREG(0x10340)
-#define EXYNOS5_CLKSRC_MASK_PERIC0		EXYNOS_CLKREG(0x10350)
-#define EXYNOS5_CLKSRC_MASK_PERIC1		EXYNOS_CLKREG(0x10354)
-
-#define EXYNOS5_CLKDIV_TOP0			EXYNOS_CLKREG(0x10510)
-#define EXYNOS5_CLKDIV_TOP1			EXYNOS_CLKREG(0x10514)
-#define EXYNOS5_CLKDIV_GSCL			EXYNOS_CLKREG(0x10520)
-#define EXYNOS5_CLKDIV_DISP1_0			EXYNOS_CLKREG(0x1052C)
-#define EXYNOS5_CLKDIV_GEN			EXYNOS_CLKREG(0x1053C)
-#define EXYNOS5_CLKDIV_MAUDIO			EXYNOS_CLKREG(0x10544)
-#define EXYNOS5_CLKDIV_FSYS0			EXYNOS_CLKREG(0x10548)
-#define EXYNOS5_CLKDIV_FSYS1			EXYNOS_CLKREG(0x1054C)
-#define EXYNOS5_CLKDIV_FSYS2			EXYNOS_CLKREG(0x10550)
-#define EXYNOS5_CLKDIV_FSYS3			EXYNOS_CLKREG(0x10554)
-#define EXYNOS5_CLKDIV_PERIC0			EXYNOS_CLKREG(0x10558)
-#define EXYNOS5_CLKDIV_PERIC1			EXYNOS_CLKREG(0x1055C)
-#define EXYNOS5_CLKDIV_PERIC2			EXYNOS_CLKREG(0x10560)
-#define EXYNOS5_CLKDIV_PERIC3			EXYNOS_CLKREG(0x10564)
-#define EXYNOS5_CLKDIV_PERIC4			EXYNOS_CLKREG(0x10568)
-#define EXYNOS5_CLKDIV_PERIC5			EXYNOS_CLKREG(0x1056C)
-#define EXYNOS5_SCLK_DIV_ISP			EXYNOS_CLKREG(0x10580)
-
-#define EXYNOS5_CLKGATE_IP_ACP			EXYNOS_CLKREG(0x08800)
-#define EXYNOS5_CLKGATE_IP_ISP0			EXYNOS_CLKREG(0x0C800)
-#define EXYNOS5_CLKGATE_IP_ISP1			EXYNOS_CLKREG(0x0C804)
-#define EXYNOS5_CLKGATE_IP_GSCL			EXYNOS_CLKREG(0x10920)
-#define EXYNOS5_CLKGATE_IP_DISP1		EXYNOS_CLKREG(0x10928)
-#define EXYNOS5_CLKGATE_IP_MFC			EXYNOS_CLKREG(0x1092C)
-#define EXYNOS5_CLKGATE_IP_G3D			EXYNOS_CLKREG(0x10930)
-#define EXYNOS5_CLKGATE_IP_GEN			EXYNOS_CLKREG(0x10934)
-#define EXYNOS5_CLKGATE_IP_FSYS			EXYNOS_CLKREG(0x10944)
-#define EXYNOS5_CLKGATE_IP_GPS			EXYNOS_CLKREG(0x1094C)
-#define EXYNOS5_CLKGATE_IP_PERIC		EXYNOS_CLKREG(0x10950)
-#define EXYNOS5_CLKGATE_IP_PERIS		EXYNOS_CLKREG(0x10960)
-#define EXYNOS5_CLKGATE_BLOCK			EXYNOS_CLKREG(0x10980)
-
-#define EXYNOS5_BPLL_CON0			EXYNOS_CLKREG(0x20110)
-#define EXYNOS5_CLKSRC_CDREX			EXYNOS_CLKREG(0x20200)
-#define EXYNOS5_CLKDIV_CDREX			EXYNOS_CLKREG(0x20500)
-
-#define EXYNOS5_PLL_DIV2_SEL			EXYNOS_CLKREG(0x20A24)
-
-#define EXYNOS5_EPLL_LOCK			EXYNOS_CLKREG(0x10030)
-
-#define EXYNOS5_EPLLCON0_LOCKED_SHIFT		(29)
-
-#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
-#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
-#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
-#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
-#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
-#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
-#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
-#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)
-
-#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
-#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
-#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
-#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
-#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
-#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)
-
 /* Compatibility defines and inclusion */
 
 #include <mach/regs-pmu.h>

arch/arm/mach-exynos/mach-armlex4210.c

@@ -177,7 +177,6 @@ static void __init armlex4210_smsc911x_init(void)
 static void __init armlex4210_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(armlex4210_uartcfgs,
 			   ARRAY_SIZE(armlex4210_uartcfgs));
 }
@@ -202,6 +201,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.map_io		= armlex4210_map_io,
 	.init_machine	= armlex4210_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= mct_init,
+	.init_time	= exynos_init_time,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos4-dt.c

@@ -11,122 +11,26 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/of_fdt.h>
 #include <linux/serial_core.h>
+#include <linux/memblock.h>
 #include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
+#include <plat/mfc.h>
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the Exynos4 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
-				"exynos4210-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2,
-				"exynos4210-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3,
-				"exynos4210-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
-				"exynos4-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
-				"exynos4-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
-				"exynos4-sdhci.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
-				"exynos4-sdhci.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
-				"s3c2440-i2c.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
-				"s3c2440-i2c.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
-				"s3c2440-i2c.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
-				"s3c2440-i2c.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
-				"s3c2440-i2c.4", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
-				"s3c2440-i2c.5", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
-				"s3c2440-i2c.6", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
-				"s3c2440-i2c.7", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
-				"exynos4210-spi.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
-				"exynos4210-spi.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
-				"exynos4210-spi.2", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
-				"exynos-tmu", NULL),
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000,
-			"exynos-sysmmu.0", NULL), /* MFC_L */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000,
-			"exynos-sysmmu.1", NULL), /* MFC_R */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000,
-			"exynos-sysmmu.2", NULL), /* TV */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000,
-			"exynos-sysmmu.3", NULL), /* JPEG */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000,
-			"exynos-sysmmu.4", NULL), /* ROTATOR */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000,
-			"exynos-sysmmu.5", NULL), /* FIMC0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000,
-			"exynos-sysmmu.6", NULL), /* FIMC1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000,
-			"exynos-sysmmu.7", NULL), /* FIMC2 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000,
-			"exynos-sysmmu.8", NULL), /* FIMC3 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000,
-			"exynos-sysmmu.9", NULL), /* G2D(4210) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000,
-			"exynos-sysmmu.9", NULL), /* G2D(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000,
-			"exynos-sysmmu.10", NULL), /* FIMD0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000,
-			"exynos-sysmmu.11", NULL), /* FIMD1(4210) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000,
-			"exynos-sysmmu.12", NULL), /* IS0(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000,
-			"exynos-sysmmu.13", NULL), /* IS1(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000,
-			"exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000,
-			"exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */
-	{},
-};
-
 static void __init exynos4_dt_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
 }
 
 static void __init exynos4_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-				exynos4_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static char const *exynos4_dt_compat[] __initdata = {
@@ -136,6 +40,18 @@ static char const *exynos4_dt_compat[] __initdata = {
 	NULL
 };
 
+static void __init exynos4_reserve(void)
+{
+#ifdef CONFIG_S5P_DEV_MFC
+	struct s5p_mfc_dt_meminfo mfc_mem;
+
+	/* Reserve memory for MFC only if it's available */
+	mfc_mem.compatible = "samsung,mfc-v5";
+	if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+		s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+				mfc_mem.lsize);
+#endif
+}
 DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	.smp		= smp_ops(exynos_smp_ops),
@@ -143,7 +59,8 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.map_io		= exynos4_dt_map_io,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= clocksource_of_init,
+	.init_time	= exynos_init_time,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
+	.reserve	= exynos4_reserve,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -11,152 +11,21 @@
 
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/serial_core.h>
 #include <linux/memblock.h>
 #include <linux/io.h>
 #include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
-#include <mach/map.h>
 #include <mach/regs-pmu.h>
 
 #include <plat/cpu.h>
-#include <plat/regs-serial.h>
 #include <plat/mfc.h>
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the EXYNOS5 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
-				"exynos4210-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
-				"exynos4210-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
-				"exynos4210-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
-				"s3c2440-i2c.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
-				"s3c2440-i2c.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
-				"s3c2440-i2c.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
-				"s3c2440-i2c.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
-				"s3c2440-i2c.4", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
-				"s3c2440-i2c.5", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
-				"s3c2440-i2c.6", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
-				"s3c2440-i2c.7", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
-				"s3c2440-hdmiphy-i2c", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
-				"dw_mmc.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
-				"dw_mmc.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
-				"dw_mmc.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
-				"dw_mmc.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
-				"exynos4210-spi.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
-				"exynos4210-spi.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
-				"exynos4210-spi.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
-				"exynos5-sata", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
-				"exynos5-sata-phy", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
-				"exynos5-sata-phy-i2c", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
-				"exynos-gsc.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
-				"exynos-gsc.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
-				"exynos-gsc.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
-				"exynos-gsc.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
-				"exynos5-hdmi", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
-				"exynos5-mixer", NULL),
-	OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
-				"exynos-tmu", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000,
-				"samsung-i2s.0", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000,
-				"samsung-i2s.1", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000,
-				"samsung-i2s.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000,
-			"exynos-sysmmu.0", "mfc"), /* MFC_L */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000,
-			"exynos-sysmmu.1", "mfc"), /* MFC_R */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000,
-			"exynos-sysmmu.2", NULL), /* TV */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000,
-			"exynos-sysmmu.3", "jpeg"), /* JPEG */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000,
-			"exynos-sysmmu.4", NULL), /* ROTATOR */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000,
-			"exynos-sysmmu.5", "gscl"), /* GSCL0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000,
-			"exynos-sysmmu.6", "gscl"), /* GSCL1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000,
-			"exynos-sysmmu.7", "gscl"), /* GSCL2 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000,
-			"exynos-sysmmu.8", "gscl"), /* GSCL3 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000,
-			"exynos-sysmmu.9", NULL), /* FIMC-IS0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000,
-			"exynos-sysmmu.10", NULL), /* FIMC-IS1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000,
-			"exynos-sysmmu.11", NULL), /* FIMD1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000,
-			"exynos-sysmmu.12", NULL), /* FIMC-LITE0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000,
-			"exynos-sysmmu.13", NULL), /* FIMC-LITE1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000,
-			"exynos-sysmmu.14", NULL), /* G2D */
-	{},
-};
-
-static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	{},
-};
-
 static void __init exynos5_dt_map_io(void)
 {
-	unsigned long root = of_get_flat_dt_root();
-
 	exynos_init_io(NULL, 0);
-
-	if (of_flat_dt_is_compatible(root, "samsung,exynos5250"))
-		s3c24xx_init_clocks(24000000);
 }
 
 static void __init exynos5_dt_machine_init(void)
@@ -183,12 +52,7 @@ static void __init exynos5_dt_machine_init(void)
 		}
 	}
 
-	if (of_machine_is_compatible("samsung,exynos5250"))
-		of_platform_populate(NULL, of_default_bus_match_table,
-				     exynos5250_auxdata_lookup, NULL);
-	else if (of_machine_is_compatible("samsung,exynos5440"))
-		of_platform_populate(NULL, of_default_bus_match_table,
-				     exynos5440_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static char const *exynos5_dt_compat[] __initdata = {
@@ -217,7 +81,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos5_dt_map_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= clocksource_of_init,
+	.init_time	= exynos_init_time,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,

arch/arm/mach-exynos/mach-nuri.c

@@ -1330,8 +1330,9 @@ static struct platform_device *nuri_devices[] __initdata = {
 static void __init nuri_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
+	xxti_f = 0;
+	xusbxti_f = 24000000;
 }
 
 static void __init nuri_reserve(void)
@@ -1380,7 +1381,7 @@ MACHINE_START(NURI, "NURI")
 	.map_io		= nuri_map_io,
 	.init_machine	= nuri_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= mct_init,
+	.init_time	= exynos_init_time,
 	.reserve        = &nuri_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END