MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support

The new UEFI-like firmware interface (LEFI, i.e. Loongson Unified
Firmware Interface) has 3 advantages:

1, Firmware export a physical memory map which is similar to X86's
   E820 map, so prom_init_memory() will be more elegant that #ifdef
   clauses can be removed.
2, Firmware export a pci irq routing table, we no longer need pci
   irq routing fixup in kernel's code.
3, Firmware has a built-in vga bios, and its address is exported,
   the linux kernel no longer need an embedded blob.

With the LEFI interface, Loongson-3A/2G and all their successors can use
a unified kernel. All Loongson-based machines support this new interface
except 2E/2F series.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
Tested-by: Alex Smith <alex.smith@imgtec.com>
Reviewed-by: Alex Smith <alex.smith@imgtec.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/6632Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/mach-loongson/boot_param.h

+#ifndef __ASM_MACH_LOONGSON_BOOT_PARAM_H_
+#define __ASM_MACH_LOONGSON_BOOT_PARAM_H_
+
+#define SYSTEM_RAM_LOW		1
+#define SYSTEM_RAM_HIGH		2
+#define MEM_RESERVED		3
+#define PCI_IO			4
+#define PCI_MEM			5
+#define LOONGSON_CFG_REG	6
+#define VIDEO_ROM		7
+#define ADAPTER_ROM		8
+#define ACPI_TABLE		9
+#define MAX_MEMORY_TYPE		10
+
+#define LOONGSON3_BOOT_MEM_MAP_MAX 128
+struct efi_memory_map_loongson {
+	u16 vers;	/* version of efi_memory_map */
+	u32 nr_map;	/* number of memory_maps */
+	u32 mem_freq;	/* memory frequence */
+	struct mem_map {
+		u32 node_id;	/* node_id which memory attached to */
+		u32 mem_type;	/* system memory, pci memory, pci io, etc. */
+		u64 mem_start;	/* memory map start address */
+		u32 mem_size;	/* each memory_map size, not the total size */
+	} map[LOONGSON3_BOOT_MEM_MAP_MAX];
+} __packed;
+
+enum loongson_cpu_type {
+	Loongson_2E = 0,
+	Loongson_2F = 1,
+	Loongson_3A = 2,
+	Loongson_3B = 3,
+	Loongson_1A = 4,
+	Loongson_1B = 5
+};
+
+/*
+ * Capability and feature descriptor structure for MIPS CPU
+ */
+struct efi_cpuinfo_loongson {
+	u16 vers;     /* version of efi_cpuinfo_loongson */
+	u32 processor_id; /* PRID, e.g. 6305, 6306 */
+	u32 cputype;  /* Loongson_3A/3B, etc. */
+	u32 total_node;   /* num of total numa nodes */
+	u32 cpu_startup_core_id; /* Core id */
+	u32 cpu_clock_freq; /* cpu_clock */
+	u32 nr_cpus;
+} __packed;
+
+struct system_loongson {
+	u16 vers;     /* version of system_loongson */
+	u32 ccnuma_smp; /* 0: no numa; 1: has numa */
+	u32 sing_double_channel; /* 1:single; 2:double */
+} __packed;
+
+struct irq_source_routing_table {
+	u16 vers;
+	u16 size;
+	u16 rtr_bus;
+	u16 rtr_devfn;
+	u32 vendor;
+	u32 device;
+	u32 PIC_type;   /* conform use HT or PCI to route to CPU-PIC */
+	u64 ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */
+	u64 ht_enable;  /* irqs used in this PIC */
+	u32 node_id;    /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
+	u64 pci_mem_start_addr;
+	u64 pci_mem_end_addr;
+	u64 pci_io_start_addr;
+	u64 pci_io_end_addr;
+	u64 pci_config_addr;
+	u32 dma_mask_bits;
+} __packed;
+
+struct interface_info {
+	u16 vers; /* version of the specificition */
+	u16 size;
+	u8  flag;
+	char description[64];
+} __packed;
+
+#define MAX_RESOURCE_NUMBER 128
+struct resource_loongson {
+	u64 start; /* resource start address */
+	u64 end;   /* resource end address */
+	char name[64];
+	u32 flags;
+};
+
+struct archdev_data {};  /* arch specific additions */
+
+struct board_devices {
+	char name[64];    /* hold the device name */
+	u32 num_resources; /* number of device_resource */
+	/* for each device's resource */
+	struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+	/* arch specific additions */
+	struct archdev_data archdata;
+};
+
+struct loongson_special_attribute {
+	u16 vers;     /* version of this special */
+	char special_name[64]; /* special_atribute_name */
+	u32 loongson_special_type; /* type of special device */
+	/* for each device's resource */
+	struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+};
+
+struct loongson_params {
+	u64 memory_offset;	/* efi_memory_map_loongson struct offset */
+	u64 cpu_offset;		/* efi_cpuinfo_loongson struct offset */
+	u64 system_offset;	/* system_loongson struct offset */
+	u64 irq_offset;		/* irq_source_routing_table struct offset */
+	u64 interface_offset;	/* interface_info struct offset */
+	u64 special_offset;	/* loongson_special_attribute struct offset */
+	u64 boarddev_table_offset;  /* board_devices offset */
+};
+
+struct smbios_tables {
+	u16 vers;     /* version of smbios */
+	u64 vga_bios; /* vga_bios address */
+	struct loongson_params lp;
+};
+
+struct efi_reset_system_t {
+	u64 ResetCold;
+	u64 ResetWarm;
+	u64 ResetType;
+	u64 Shutdown;
+	u64 DoSuspend; /* NULL if not support */
+};
+
+struct efi_loongson {
+	u64 mps;	/* MPS table */
+	u64 acpi;	/* ACPI table (IA64 ext 0.71) */
+	u64 acpi20;	/* ACPI table (ACPI 2.0) */
+	struct smbios_tables smbios;	/* SM BIOS table */
+	u64 sal_systab;	/* SAL system table */
+	u64 boot_info;	/* boot info table */
+};
+
+struct boot_params {
+	struct efi_loongson efi;
+	struct efi_reset_system_t reset_system;
+};
+
+struct loongson_system_configuration {
+	u32 nr_cpus;
+	enum loongson_cpu_type cputype;
+	u64 ht_control_base;
+	u64 pci_mem_start_addr;
+	u64 pci_mem_end_addr;
+	u64 pci_io_base;
+	u64 restart_addr;
+	u64 poweroff_addr;
+	u64 suspend_addr;
+	u64 vgabios_addr;
+	u32 dma_mask_bits;
+};
+
+extern struct efi_memory_map_loongson *loongson_memmap;
+extern struct loongson_system_configuration loongson_sysconf;
+#endif

arch/mips/include/asm/mach-loongson/loongson.h

@@ -24,8 +24,8 @@ extern void mach_prepare_reboot(void);
 extern void mach_prepare_shutdown(void);
 
 /* environment arguments from bootloader */
-extern unsigned long cpu_clock_freq;
-extern unsigned long memsize, highmemsize;
+extern u32 cpu_clock_freq;
+extern u32 memsize, highmemsize;
 
 /* loongson-specific command line, env and memory initialization */
 extern void __init prom_init_memory(void);

arch/mips/loongson/common/env.c

@@ -18,29 +18,30 @@
  * option) any later version.
  */
 #include <linux/module.h>
-
 #include <asm/bootinfo.h>
-
 #include <loongson.h>
+#include <boot_param.h>
 
-unsigned long cpu_clock_freq;
+u32 cpu_clock_freq;
 EXPORT_SYMBOL(cpu_clock_freq);
-unsigned long memsize, highmemsize;
+struct efi_memory_map_loongson *loongson_memmap;
+struct loongson_system_configuration loongson_sysconf;
 
 #define parse_even_earlier(res, option, p)				\
 do {									\
 	unsigned int tmp __maybe_unused;				\
 									\
 	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-		tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \
+		tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \
 } while (0)
 
 void __init prom_init_env(void)
 {
 	/* pmon passes arguments in 32bit pointers */
-	int *_prom_envp;
-	unsigned long bus_clock;
 	unsigned int processor_id;
+
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+	int *_prom_envp;
 	long l;
 
 	/* firmware arguments are initialized in head.S */
@@ -48,7 +49,6 @@ void __init prom_init_env(void)
 
 	l = (long)*_prom_envp;
 	while (l != 0) {
-		parse_even_earlier(bus_clock, "busclock", l);
 		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
 		parse_even_earlier(memsize, "memsize", l);
 		parse_even_earlier(highmemsize, "highmemsize", l);
@@ -57,8 +57,48 @@ void __init prom_init_env(void)
 	}
 	if (memsize == 0)
 		memsize = 256;
-	if (bus_clock == 0)
-		bus_clock = 66000000;
+	pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
+#else
+	struct boot_params *boot_p;
+	struct loongson_params *loongson_p;
+	struct efi_cpuinfo_loongson *ecpu;
+	struct irq_source_routing_table *eirq_source;
+
+	/* firmware arguments are initialized in head.S */
+	boot_p = (struct boot_params *)fw_arg2;
+	loongson_p = &(boot_p->efi.smbios.lp);
+
+	ecpu = (struct efi_cpuinfo_loongson *)
+		((u64)loongson_p + loongson_p->cpu_offset);
+	eirq_source = (struct irq_source_routing_table *)
+		((u64)loongson_p + loongson_p->irq_offset);
+	loongson_memmap = (struct efi_memory_map_loongson *)
+		((u64)loongson_p + loongson_p->memory_offset);
+
+	cpu_clock_freq = ecpu->cpu_clock_freq;
+	loongson_sysconf.cputype = ecpu->cputype;
+	loongson_sysconf.nr_cpus = ecpu->nr_cpus;
+	if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
+		loongson_sysconf.nr_cpus = NR_CPUS;
+
+	loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
+	loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
+	loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;
+	loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
+	if (loongson_sysconf.dma_mask_bits < 32 ||
+		loongson_sysconf.dma_mask_bits > 64)
+		loongson_sysconf.dma_mask_bits = 32;
+
+	loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
+	loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
+	loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend;
+
+	loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
+	loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios;
+	pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n",
+		loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr,
+		loongson_sysconf.vgabios_addr);
+#endif
 	if (cpu_clock_freq == 0) {
 		processor_id = (&current_cpu_data)->processor_id;
 		switch (processor_id & PRID_REV_MASK) {
@@ -68,12 +108,13 @@ void __init prom_init_env(void)
 		case PRID_REV_LOONGSON2F:
 			cpu_clock_freq = 797000000;
 			break;
+		case PRID_REV_LOONGSON3A:
+			cpu_clock_freq = 900000000;
+			break;
 		default:
 			cpu_clock_freq = 100000000;
 			break;
 		}
 	}
-
-	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
-		bus_clock, cpu_clock_freq, memsize, highmemsize);
+	pr_info("CpuClock = %u\n", cpu_clock_freq);
 }

arch/mips/loongson/common/init.c

@@ -17,10 +17,6 @@ unsigned long __maybe_unused _loongson_addrwincfg_base;
 
 void __init prom_init(void)
 {
-	/* init base address of io space */
-	set_io_port_base((unsigned long)
-		ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
-
 #ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
 	_loongson_addrwincfg_base = (unsigned long)
 		ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
@@ -28,6 +24,11 @@ void __init prom_init(void)
 
 	prom_init_cmdline();
 	prom_init_env();
+
+	/* init base address of io space */
+	set_io_port_base((unsigned long)
+		ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+
 	prom_init_memory();
 
 	/*init the uart base address */

arch/mips/loongson/common/mem.c

@@ -11,9 +11,14 @@
 #include <asm/bootinfo.h>
 
 #include <loongson.h>
+#include <boot_param.h>
 #include <mem.h>
 #include <pci.h>
 
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+
+u32 memsize, highmemsize;
+
 void __init prom_init_memory(void)
 {
 	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
@@ -49,6 +54,43 @@ void __init prom_init_memory(void)
 #endif /* !CONFIG_64BIT */
 }
 
+#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */
+
+void __init prom_init_memory(void)
+{
+	int i;
+	u32 node_id;
+	u32 mem_type;
+
+	/* parse memory information */
+	for (i = 0; i < loongson_memmap->nr_map; i++) {
+		node_id = loongson_memmap->map[i].node_id;
+		mem_type = loongson_memmap->map[i].mem_type;
+
+		if (node_id == 0) {
+			switch (mem_type) {
+			case SYSTEM_RAM_LOW:
+				add_memory_region(loongson_memmap->map[i].mem_start,
+					(u64)loongson_memmap->map[i].mem_size << 20,
+					BOOT_MEM_RAM);
+				break;
+			case SYSTEM_RAM_HIGH:
+				add_memory_region(loongson_memmap->map[i].mem_start,
+					(u64)loongson_memmap->map[i].mem_size << 20,
+					BOOT_MEM_RAM);
+				break;
+			case MEM_RESERVED:
+				add_memory_region(loongson_memmap->map[i].mem_start,
+					(u64)loongson_memmap->map[i].mem_size << 20,
+					BOOT_MEM_RESERVED);
+				break;
+			}
+		}
+	}
+}
+
+#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */
+
 /* override of arch/mips/mm/cache.c: __uncached_access */
 int __uncached_access(struct file *file, unsigned long addr)
 {

arch/mips/loongson/common/pci.c

@@ -11,6 +11,7 @@
 
 #include <pci.h>
 #include <loongson.h>
+#include <boot_param.h>
 
 static struct resource loongson_pci_mem_resource = {
 	.name	= "pci memory space",
@@ -82,7 +83,10 @@ static int __init pcibios_init(void)
 	setup_pcimap();
 
 	loongson_pci_controller.io_map_base = mips_io_port_base;
-
+#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE
+	loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr;
+	loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr;
+#endif
 	register_pci_controller(&loongson_pci_controller);
 
 	return 0;

arch/mips/loongson/common/reset.c

@@ -16,6 +16,7 @@
 #include <asm/reboot.h>
 
 #include <loongson.h>
+#include <boot_param.h>
 
 static inline void loongson_reboot(void)
 {
@@ -37,17 +38,37 @@ static inline void loongson_reboot(void)
 
 static void loongson_restart(char *command)
 {
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
 	/* do preparation for reboot */
 	mach_prepare_reboot();
 
 	/* reboot via jumping to boot base address */
 	loongson_reboot();
+#else
+	void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
+
+	fw_restart();
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
+	}
+#endif
 }
 
 static void loongson_poweroff(void)
 {
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
 	mach_prepare_shutdown();
 	unreachable();
+#else
+	void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
+
+	fw_poweroff();
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
+	}
+#endif
 }
 
 static void loongson_halt(void)