power: bq24735-charger: fix failed i2c with ac-detect

When an ac-detect pin exists, but the charger is not plugged in,
the chip will not respond to i2c messages, causing the module to
fail when inserted.
Signed-off-by: Jonathan Tinkham <sctincman@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

drivers/power/bq24735-charger.c

@@ -381,6 +381,21 @@ static int bq24735_charger_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, charger);
 
+	if (gpio_is_valid(charger->pdata->status_gpio)) {
+		ret = devm_gpio_request(&client->dev,
+					charger->pdata->status_gpio,
+					name);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed GPIO request for GPIO %d: %d\n",
+				charger->pdata->status_gpio, ret);
+		}
+
+		charger->pdata->status_gpio_valid = !ret;
+	}
+
+	if (!charger->pdata->status_gpio_valid
+	    || bq24735_charger_is_present(charger)) {
 		ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
 		if (ret < 0) {
 			dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
@@ -401,18 +416,6 @@ static int bq24735_charger_probe(struct i2c_client *client,
 				"device id mismatch. 0x000b != 0x%04x\n", ret);
 			return -ENODEV;
 		}
-
-	if (gpio_is_valid(charger->pdata->status_gpio)) {
-		ret = devm_gpio_request(&client->dev,
-					charger->pdata->status_gpio,
-					name);
-		if (ret) {
-			dev_err(&client->dev,
-				"Failed GPIO request for GPIO %d: %d\n",
-				charger->pdata->status_gpio, ret);
-		}
-
-		charger->pdata->status_gpio_valid = !ret;
 	}
 
 	ret = bq24735_config_charger(charger);