Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:
 "The second round of updates for the input subsystem.

  Updates to ALPS an bfin_roraty drivers and a couple oother fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - use IS_ENABLED instead of homegrown code
  Input: bfin_rotary - introduce open and close methods
  Input: bfin_rotary - convert to use managed resources
  Input: bfin_rotary - use generic IO functions
  Input: bfin_rotary - move pin lists into into platform data
  Input: bfin_rotary - move platform header to linux/platform_data
  Input: bfin_rotary - mark suspend and resume code as __maybe_unused
  Input: bfin_rotary - fix potential oops in interrupt handler
  Input: ALPS - move v7 packet info to Documentation and v6 packet info
  Input: ALPS - fix confusing comment in protocol data
  Input: ALPS - do not mix trackstick and external PS/2 mouse data
  Input: ALPS - fix trackstick detection on some Dell Latitudes
  Input: ALPS - consolidate setting protocol parameters
  Input: ALPS - split protocol data from model info
  Input: ALPS - make Rushmore a separate protocol
  Input: ALPS - renumber protocol numbers
  Input: adi - remove an unnecessary check
  Input: pxa27x_keypad - remove an unneeded NULL check
  Input: soc_button_array - use "Windows" key for "Home"

Documentation/input/alps.txt

@@ -3,8 +3,8 @@ ALPS Touchpad Protocol
 
 Introduction
 ------------
-Currently the ALPS touchpad driver supports five protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, 4 and 5.
+Currently the ALPS touchpad driver supports seven protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, 4, 5, 6 and 7.
 
 Since roughly mid-2010 several new ALPS touchpads have been released and
 integrated into a variety of laptops and netbooks.  These new touchpads
@@ -240,3 +240,67 @@ For mt, the format is:
  byte 3:    0  x23  x22   x21 x20  x19  x18   x17
  byte 4:    0   x9   x8    x7  x6   x5   x4    x3
  byte 5:    0  x16  x15   x14 x13  x12  x11   x10
+
+ALPS Absolute Mode - Protocol Version 6
+---------------------------------------
+
+For trackstick packet, the format is:
+
+ byte 0:    1    1    1    1    1    1    1    1
+ byte 1:    0   X6   X5   X4   X3   X2   X1   X0
+ byte 2:    0   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ byte 3:    ?   Y7   X7    ?    ?    M    R    L
+ byte 4:   Z7   Z6   Z5   Z4   Z3   Z2   Z1   Z0
+ byte 5:    0    1    1    1    1    1    1    1
+
+For touchpad packet, the format is:
+
+ byte 0:    1    1    1    1    1    1    1    1
+ byte 1:    0    0    0    0   x3   x2   x1   x0
+ byte 2:    0    0    0    0   y3   y2   y1   y0
+ byte 3:    ?   x7   x6   x5   x4    ?    r    l
+ byte 4:    ?   y7   y6   y5   y4    ?    ?    ?
+ byte 5:   z7   z6   z5   z4   z3   z2   z1   z0
+
+(v6 touchpad does not have middle button)
+
+ALPS Absolute Mode - Protocol Version 7
+---------------------------------------
+
+For trackstick packet, the format is:
+
+ byte 0:    0    1    0    0    1    0    0    0
+ byte 1:    1    1    *    *    1    M    R    L
+ byte 2:   X7    1   X5   X4   X3   X2   X1   X0
+ byte 3:   Z6    1   Y6   X6    1   Y2   Y1   Y0
+ byte 4:   Y7    0   Y5   Y4   Y3    1    1    0
+ byte 5:  T&P    0   Z5   Z4   Z3   Z2   Z1   Z0
+
+For touchpad packet, the format is:
+
+         packet-fmt     b7     b6     b5     b4     b3     b2     b1     b0
+ byte 0: TWO & MULTI     L      1      R      M      1   Y0-2   Y0-1   Y0-0
+ byte 0: NEW             L      1   X1-5      1      1   Y0-2   Y0-1   Y0-0
+ byte 1:             Y0-10   Y0-9   Y0-8   Y0-7   Y0-6   Y0-5   Y0-4   Y0-3
+ byte 2:             X0-11      1  X0-10   X0-9   X0-8   X0-7   X0-6   X0-5
+ byte 3:             X1-11      1   X0-4   X0-3      1   X0-2   X0-1   X0-0
+ byte 4: TWO         X1-10    TWO   X1-9   X1-8   X1-7   X1-6   X1-5   X1-4
+ byte 4: MULTI       X1-10    TWO   X1-9   X1-8   X1-7   X1-6   Y1-5      1
+ byte 4: NEW         X1-10    TWO   X1-9   X1-8   X1-7   X1-6      0      0
+ byte 5: TWO & NEW   Y1-10      0   Y1-9   Y1-8   Y1-7   Y1-6   Y1-5   Y1-4
+ byte 5: MULTI       Y1-10      0   Y1-9   Y1-8   Y1-7   Y1-6    F-1    F-0
+
+ L:         Left button
+ R / M:     Non-clickpads: Right / Middle button
+            Clickpads: When > 2 fingers are down, and some fingers
+            are in the button area, then the 2 coordinates reported
+            are for fingers outside the button area and these report
+            extra fingers being present in the right / left button
+            area. Note these fingers are not added to the F field!
+            so if a TWO packet is received and R = 1 then there are
+            3 fingers down, etc.
+ TWO:       1: Two touches present, byte 0/4/5 are in TWO fmt
+            0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+               in NEW fmt
+ F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...

arch/blackfin/mach-bf527/boards/ad7160eval.c

@@ -666,7 +666,14 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
+
+static const u16 per_cnt[] = {
+	P_CNT_CUD,
+	P_CNT_CDG,
+	P_CNT_CZM,
+	0
+};
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
@@ -676,9 +683,15 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 	.debounce	   = 10,	/* 0..17 */
 	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
 	.pm_wakeup	   = 1,
+	.pin_list	   = per_cnt,
 };
 
 static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.start = IRQ_CNT,
 		.end = IRQ_CNT,

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -1092,7 +1092,14 @@ static struct platform_device bfin_device_gpiokeys = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
+
+static const u16 per_cnt[] = {
+	P_CNT_CUD,
+	P_CNT_CDG,
+	P_CNT_CZM,
+	0
+};
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
@@ -1102,9 +1109,15 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 	.debounce	   = 10,	/* 0..17 */
 	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
 	.pm_wakeup	   = 1,
+	.pin_list	   = per_cnt,
 };
 
 static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.start = IRQ_CNT,
 		.end = IRQ_CNT,

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -159,7 +159,7 @@ static struct platform_device bf54x_kpad_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
@@ -172,6 +172,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 };
 
 static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.start = IRQ_CNT,
 		.end = IRQ_CNT,

arch/blackfin/mach-bf609/boards/ezkit.c

@@ -75,7 +75,7 @@ static struct platform_device bfin_isp1760_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
@@ -87,6 +87,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 };
 
 static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.start = IRQ_CNT,
 		.end = IRQ_CNT,

drivers/input/joystick/adi.c

@@ -535,7 +535,6 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv)
 		}
 	}
  fail2:	for (i = 0; i < 2; i++)
-		if (port->adi[i].dev)
 		input_free_device(port->adi[i].dev);
 	gameport_close(gameport);
  fail1:	gameport_set_drvdata(gameport, NULL);

drivers/input/keyboard/pxa27x_keypad.c

@@ -345,13 +345,11 @@ static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
 {
 	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	struct input_dev *input_dev = keypad->input_dev;
-	const struct matrix_keymap_data *keymap_data =
-				pdata ? pdata->matrix_keymap_data : NULL;
 	unsigned short keycode;
 	int i;
 	int error;
 
-	error = matrix_keypad_build_keymap(keymap_data, NULL,
+	error = matrix_keypad_build_keymap(pdata->matrix_keymap_data, NULL,
 					   pdata->matrix_key_rows,
 					   pdata->matrix_key_cols,
 					   keypad->keycodes, input_dev);

drivers/input/misc/bfin_rotary.c

@@ -7,29 +7,37 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/slab.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 #include <asm/portmux.h>
-#include <asm/bfin_rotary.h>
 
-static const u16 per_cnt[] = {
-	P_CNT_CUD,
-	P_CNT_CDG,
-	P_CNT_CZM,
-	0
-};
+#define CNT_CONFIG_OFF		0	/* CNT Config Offset */
+#define CNT_IMASK_OFF		4	/* CNT Interrupt Mask Offset */
+#define CNT_STATUS_OFF		8	/* CNT Status Offset */
+#define CNT_COMMAND_OFF		12	/* CNT Command Offset */
+#define CNT_DEBOUNCE_OFF	16	/* CNT Debounce Offset */
+#define CNT_COUNTER_OFF		20	/* CNT Counter Offset */
+#define CNT_MAX_OFF		24	/* CNT Maximum Count Offset */
+#define CNT_MIN_OFF		28	/* CNT Minimum Count Offset */
 
 struct bfin_rot {
 	struct input_dev *input;
+	void __iomem *base;
 	int irq;
 	unsigned int up_key;
 	unsigned int down_key;
 	unsigned int button_key;
 	unsigned int rel_code;
+
+	unsigned short mode;
+	unsigned short debounce;
+
 	unsigned short cnt_config;
 	unsigned short cnt_imask;
 	unsigned short cnt_debounce;
@@ -59,18 +67,17 @@ static void report_rotary_event(struct bfin_rot *rotary, int delta)
 
 static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
 {
-	struct platform_device *pdev = dev_id;
-	struct bfin_rot *rotary = platform_get_drvdata(pdev);
+	struct bfin_rot *rotary = dev_id;
 	int delta;
 
-	switch (bfin_read_CNT_STATUS()) {
+	switch (readw(rotary->base + CNT_STATUS_OFF)) {
 
 	case ICII:
 		break;
 
 	case UCII:
 	case DCII:
-		delta = bfin_read_CNT_COUNTER();
+		delta = readl(rotary->base + CNT_COUNTER_OFF);
 		if (delta)
 			report_rotary_event(rotary, delta);
 		break;
@@ -83,16 +90,52 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
 		break;
 	}
 
-	bfin_write_CNT_COMMAND(W1LCNT_ZERO);	/* Clear COUNTER */
-	bfin_write_CNT_STATUS(-1);	/* Clear STATUS */
+	writew(W1LCNT_ZERO, rotary->base + CNT_COMMAND_OFF); /* Clear COUNTER */
+	writew(-1, rotary->base + CNT_STATUS_OFF); /* Clear STATUS */
 
 	return IRQ_HANDLED;
 }
 
+static int bfin_rotary_open(struct input_dev *input)
+{
+	struct bfin_rot *rotary = input_get_drvdata(input);
+	unsigned short val;
+
+	if (rotary->mode & ROT_DEBE)
+		writew(rotary->debounce & DPRESCALE,
+			rotary->base + CNT_DEBOUNCE_OFF);
+
+	writew(rotary->mode & ~CNTE, rotary->base + CNT_CONFIG_OFF);
+
+	val = UCIE | DCIE;
+	if (rotary->button_key)
+		val |= CZMIE;
+	writew(val, rotary->base + CNT_IMASK_OFF);
+
+	writew(rotary->mode | CNTE, rotary->base + CNT_CONFIG_OFF);
+
+	return 0;
+}
+
+static void bfin_rotary_close(struct input_dev *input)
+{
+	struct bfin_rot *rotary = input_get_drvdata(input);
+
+	writew(0, rotary->base + CNT_CONFIG_OFF);
+	writew(0, rotary->base + CNT_IMASK_OFF);
+}
+
+static void bfin_rotary_free_action(void *data)
+{
+	peripheral_free_list(data);
+}
+
 static int bfin_rotary_probe(struct platform_device *pdev)
 {
-	struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	const struct bfin_rotary_platform_data *pdata = dev_get_platdata(dev);
 	struct bfin_rot *rotary;
+	struct resource *res;
 	struct input_dev *input;
 	int error;
 
@@ -102,18 +145,37 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	error = peripheral_request_list(per_cnt, dev_name(&pdev->dev));
+	if (pdata->pin_list) {
+		error = peripheral_request_list(pdata->pin_list,
+						dev_name(&pdev->dev));
 		if (error) {
-		dev_err(&pdev->dev, "requesting peripherals failed\n");
+			dev_err(dev, "requesting peripherals failed: %d\n",
+				error);
 			return error;
 		}
 
-	rotary = kzalloc(sizeof(struct bfin_rot), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!rotary || !input) {
-		error = -ENOMEM;
-		goto out1;
+		error = devm_add_action(dev, bfin_rotary_free_action,
+					pdata->pin_list);
+		if (error) {
+			dev_err(dev, "setting cleanup action failed: %d\n",
+				error);
+			peripheral_free_list(pdata->pin_list);
+			return error;
 		}
+	}
+
+	rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL);
+	if (!rotary)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rotary->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(rotary->base))
+		return PTR_ERR(rotary->base);
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
 
 	rotary->input = input;
 
@@ -122,9 +184,8 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 	rotary->button_key = pdata->rotary_button_key;
 	rotary->rel_code = pdata->rotary_rel_code;
 
-	error = rotary->irq = platform_get_irq(pdev, 0);
-	if (error < 0)
-		goto out1;
+	rotary->mode = pdata->mode;
+	rotary->debounce = pdata->debounce;
 
 	input->name = pdev->name;
 	input->phys = "bfin-rotary/input0";
@@ -137,6 +198,9 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 	input->id.product = 0x0001;
 	input->id.version = 0x0100;
 
+	input->open = bfin_rotary_open;
+	input->close = bfin_rotary_close;
+
 	if (rotary->up_key) {
 		__set_bit(EV_KEY, input->evbit);
 		__set_bit(rotary->up_key, input->keybit);
@@ -151,75 +215,43 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 		__set_bit(rotary->button_key, input->keybit);
 	}
 
-	error = request_irq(rotary->irq, bfin_rotary_isr,
-			    0, dev_name(&pdev->dev), pdev);
+	/* Quiesce the device before requesting irq */
+	bfin_rotary_close(input);
+
+	rotary->irq = platform_get_irq(pdev, 0);
+	if (rotary->irq < 0) {
+		dev_err(dev, "No rotary IRQ specified\n");
+		return -ENOENT;
+	}
+
+	error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr,
+				 0, dev_name(dev), rotary);
 	if (error) {
-		dev_err(&pdev->dev,
-			"unable to claim irq %d; error %d\n",
+		dev_err(dev, "unable to claim irq %d; error %d\n",
 			rotary->irq, error);
-		goto out1;
+		return error;
 	}
 
 	error = input_register_device(input);
 	if (error) {
-		dev_err(&pdev->dev,
-			"unable to register input device (%d)\n", error);
-		goto out2;
+		dev_err(dev, "unable to register input device (%d)\n", error);
+		return error;
 	}
 
-	if (pdata->rotary_button_key)
-		bfin_write_CNT_IMASK(CZMIE);
-
-	if (pdata->mode & ROT_DEBE)
-		bfin_write_CNT_DEBOUNCE(pdata->debounce & DPRESCALE);
-
-	if (pdata->mode)
-		bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() |
-					(pdata->mode & ~CNTE));
-
-	bfin_write_CNT_IMASK(bfin_read_CNT_IMASK() | UCIE | DCIE);
-	bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() | CNTE);
-
 	platform_set_drvdata(pdev, rotary);
 	device_init_wakeup(&pdev->dev, 1);
 
-	return 0;
-
-out2:
-	free_irq(rotary->irq, pdev);
-out1:
-	input_free_device(input);
-	kfree(rotary);
-	peripheral_free_list(per_cnt);
-
-	return error;
-}
-
-static int bfin_rotary_remove(struct platform_device *pdev)
-{
-	struct bfin_rot *rotary = platform_get_drvdata(pdev);
-
-	bfin_write_CNT_CONFIG(0);
-	bfin_write_CNT_IMASK(0);
-
-	free_irq(rotary->irq, pdev);
-	input_unregister_device(rotary->input);
-	peripheral_free_list(per_cnt);
-
-	kfree(rotary);
-
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int bfin_rotary_suspend(struct device *dev)
+static int __maybe_unused bfin_rotary_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct bfin_rot *rotary = platform_get_drvdata(pdev);
 
-	rotary->cnt_config = bfin_read_CNT_CONFIG();
-	rotary->cnt_imask = bfin_read_CNT_IMASK();
-	rotary->cnt_debounce = bfin_read_CNT_DEBOUNCE();
+	rotary->cnt_config = readw(rotary->base + CNT_CONFIG_OFF);
+	rotary->cnt_imask = readw(rotary->base + CNT_IMASK_OFF);
+	rotary->cnt_debounce = readw(rotary->base + CNT_DEBOUNCE_OFF);
 
 	if (device_may_wakeup(&pdev->dev))
 		enable_irq_wake(rotary->irq);
@@ -227,38 +259,32 @@ static int bfin_rotary_suspend(struct device *dev)
 	return 0;
 }
 
-static int bfin_rotary_resume(struct device *dev)
+static int __maybe_unused bfin_rotary_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct bfin_rot *rotary = platform_get_drvdata(pdev);
 
-	bfin_write_CNT_DEBOUNCE(rotary->cnt_debounce);
-	bfin_write_CNT_IMASK(rotary->cnt_imask);
-	bfin_write_CNT_CONFIG(rotary->cnt_config & ~CNTE);
+	writew(rotary->cnt_debounce, rotary->base + CNT_DEBOUNCE_OFF);
+	writew(rotary->cnt_imask, rotary->base + CNT_IMASK_OFF);
+	writew(rotary->cnt_config & ~CNTE, rotary->base + CNT_CONFIG_OFF);
 
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(rotary->irq);
 
 	if (rotary->cnt_config & CNTE)
-		bfin_write_CNT_CONFIG(rotary->cnt_config);
+		writew(rotary->cnt_config, rotary->base + CNT_CONFIG_OFF);
 
 	return 0;
 }
 
-static const struct dev_pm_ops bfin_rotary_pm_ops = {
-	.suspend	= bfin_rotary_suspend,
-	.resume		= bfin_rotary_resume,
-};
-#endif
+static SIMPLE_DEV_PM_OPS(bfin_rotary_pm_ops,
+			 bfin_rotary_suspend, bfin_rotary_resume);
 
 static struct platform_driver bfin_rotary_device_driver = {
 	.probe		= bfin_rotary_probe,
-	.remove		= bfin_rotary_remove,
 	.driver		= {
 		.name	= "bfin-rotary",
-#ifdef CONFIG_PM
 		.pm	= &bfin_rotary_pm_ops,
-#endif
 	},
 };
 module_platform_driver(bfin_rotary_device_driver);

drivers/input/misc/soc_button_array.c

@@ -195,7 +195,7 @@ static int soc_button_probe(struct platform_device *pdev)
 
 static struct soc_button_info soc_button_PNP0C40[] = {
 	{ "power", 0, EV_KEY, KEY_POWER, false, true },
-	{ "home", 1, EV_KEY, KEY_HOME, false, true },
+	{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true },
 	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
 	{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false },
 	{ "rotation_lock", 4, EV_SW, SW_ROTATE_LOCK, false, false },

drivers/input/mouse/alps.h

@@ -14,13 +14,14 @@
 
 #include <linux/input/mt.h>
 
-#define ALPS_PROTO_V1	1
-#define ALPS_PROTO_V2	2
-#define ALPS_PROTO_V3	3
-#define ALPS_PROTO_V4	4
-#define ALPS_PROTO_V5	5
-#define ALPS_PROTO_V6	6
-#define ALPS_PROTO_V7	7	/* t3btl t4s */
+#define ALPS_PROTO_V1		0x100
+#define ALPS_PROTO_V2		0x200
+#define ALPS_PROTO_V3		0x300
+#define ALPS_PROTO_V3_RUSHMORE	0x310
+#define ALPS_PROTO_V4		0x400
+#define ALPS_PROTO_V5		0x500
+#define ALPS_PROTO_V6		0x600
+#define ALPS_PROTO_V7		0x700	/* t3btl t4s */
 
 #define MAX_TOUCHES	2
 
@@ -45,6 +46,21 @@ enum V7_PACKET_ID {
 	 V7_PACKET_ID_UNKNOWN,
 };
 
+/**
+ * struct alps_protocol_info - information about protocol used by a device
+ * @version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ *   known format for this model.  The first byte of the report, ANDed with
+ *   mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ */
+struct alps_protocol_info {
+	u16 version;
+	u8 byte0, mask0;
+	unsigned int flags;
+};
+
 /**
  * struct alps_model_info - touchpad ID table
  * @signature: E7 response string to match.
@@ -52,23 +68,16 @@ enum V7_PACKET_ID {
  *   (aka command mode response) identifies the firmware minor version.  This
  *   can be used to distinguish different hardware models which are not
  *   uniquely identifiable through their E7 responses.
- * @proto_version: Indicates V1/V2/V3/...
- * @byte0: Helps figure out whether a position report packet matches the
- *   known format for this model.  The first byte of the report, ANDed with
- *   mask0, should match byte0.
- * @mask0: The mask used to check the first byte of the report.
- * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @protocol_info: information about protcol used by the device.
  *
  * Many (but not all) ALPS touchpads can be identified by looking at the
  * values returned in the "E7 report" and/or the "EC report."  This table
  * lists a number of such touchpads.
  */
 struct alps_model_info {
-	unsigned char signature[3];
-	unsigned char command_mode_resp;
-	unsigned char proto_version;
-	unsigned char byte0, mask0;
-	int flags;
+	u8 signature[3];
+	u8 command_mode_resp;
+	struct alps_protocol_info protocol_info;
 };
 
 /**
@@ -132,8 +141,12 @@ struct alps_fields {
 
 /**
  * struct alps_data - private data structure for the ALPS driver
- * @dev2: "Relative" device used to report trackstick or mouse activity.
- * @phys: Physical path for the relative device.
+ * @psmouse: Pointer to parent psmouse device
+ * @dev2: Trackstick device (can be NULL).
+ * @dev3: Generic PS/2 mouse (can be NULL, delayed registering).
+ * @phys2: Physical path for the trackstick device.
+ * @phys3: Physical path for the generic PS/2 mouse.
+ * @dev3_register_work: Delayed work for registering PS/2 mouse.
  * @nibble_commands: Command mapping used for touchpad register accesses.
  * @addr_command: Command used to tell the touchpad that a register address
  *   follows.
@@ -160,15 +173,19 @@ struct alps_fields {
  * @timer: Timer for flushing out the final report packet in the stream.
  */
 struct alps_data {
+	struct psmouse *psmouse;
 	struct input_dev *dev2;
-	char phys[32];
+	struct input_dev *dev3;
+	char phys2[32];
+	char phys3[32];
+	struct delayed_work dev3_register_work;
 
 	/* these are autodetected when the device is identified */
 	const struct alps_nibble_commands *nibble_commands;
 	int addr_command;
-	unsigned char proto_version;
-	unsigned char byte0, mask0;
-	unsigned char fw_ver[3];
+	u16 proto_version;
+	u8 byte0, mask0;
+	u8 fw_ver[3];
 	int flags;
 	int x_max;
 	int y_max;

drivers/input/mouse/cypress_ps2.c

@@ -710,8 +710,3 @@ int cypress_init(struct psmouse *psmouse)
 
 	return -1;
 }
-
-bool cypress_supported(void)
-{
-	return true;
-}

drivers/input/mouse/cypress_ps2.h

@@ -172,7 +172,6 @@ struct cytp_data {
 #ifdef CONFIG_MOUSE_PS2_CYPRESS
 int cypress_detect(struct psmouse *psmouse, bool set_properties);
 int cypress_init(struct psmouse *psmouse);
-bool cypress_supported(void);
 #else
 inline int cypress_detect(struct psmouse *psmouse, bool set_properties)
 {
@@ -182,10 +181,6 @@ inline int cypress_init(struct psmouse *psmouse)
 {
 	return -ENOSYS;
 }
-inline bool cypress_supported(void)
-{
-	return 0;
-}
 #endif /* CONFIG_MOUSE_PS2_CYPRESS */
 
 #endif  /* _CYPRESS_PS2_H */

drivers/input/mouse/focaltech.c

@@ -424,11 +424,6 @@ int focaltech_init(struct psmouse *psmouse)
 	return error;
 }
 
-bool focaltech_supported(void)
-{
-	return true;
-}
-
 #else /* CONFIG_MOUSE_PS2_FOCALTECH */
 
 int focaltech_init(struct psmouse *psmouse)
@@ -438,9 +433,4 @@ int focaltech_init(struct psmouse *psmouse)
 	return 0;
 }
 
-bool focaltech_supported(void)
-{
-	return false;
-}
-
 #endif /* CONFIG_MOUSE_PS2_FOCALTECH */

drivers/input/mouse/focaltech.h

@@ -19,6 +19,5 @@
 
 int focaltech_detect(struct psmouse *psmouse, bool set_properties);
 int focaltech_init(struct psmouse *psmouse);
-bool focaltech_supported(void);
 
 #endif

drivers/input/mouse/psmouse-base.c

@@ -727,7 +727,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
 	if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) {
 		if (max_proto > PSMOUSE_IMEX) {
 			if (!set_properties || focaltech_init(psmouse) == 0) {
-				if (focaltech_supported())
+				if (IS_ENABLED(CONFIG_MOUSE_PS2_FOCALTECH))
 					return PSMOUSE_FOCALTECH;
 				/*
 				 * Note that we need to also restrict
@@ -776,7 +776,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
  * Try activating protocol, but check if support is enabled first, since
  * we try detecting Synaptics even when protocol is disabled.
  */
-			if (synaptics_supported() &&
+			if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) &&
 			    (!set_properties || synaptics_init(psmouse) == 0)) {
 				return PSMOUSE_SYNAPTICS;
 			}
@@ -801,7 +801,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
  */
 	if (max_proto > PSMOUSE_IMEX &&
 			cypress_detect(psmouse, set_properties) == 0) {
-		if (cypress_supported()) {
+		if (IS_ENABLED(CONFIG_MOUSE_PS2_CYPRESS)) {
 			if (cypress_init(psmouse) == 0)
 				return PSMOUSE_CYPRESS;
 

drivers/input/mouse/synaptics.c

@@ -1454,11 +1454,6 @@ int synaptics_init_relative(struct psmouse *psmouse)
 	return __synaptics_init(psmouse, false);
 }
 
-bool synaptics_supported(void)
-{
-	return true;
-}
-
 #else /* CONFIG_MOUSE_PS2_SYNAPTICS */
 
 void __init synaptics_module_init(void)
@@ -1470,9 +1465,4 @@ int synaptics_init(struct psmouse *psmouse)
 	return -ENOSYS;
 }
 
-bool synaptics_supported(void)
-{
-	return false;
-}
-
 #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */

drivers/input/mouse/synaptics.h

@@ -175,6 +175,5 @@ int synaptics_detect(struct psmouse *psmouse, bool set_properties);
 int synaptics_init(struct psmouse *psmouse);
 int synaptics_init_relative(struct psmouse *psmouse);
 void synaptics_reset(struct psmouse *psmouse);
-bool synaptics_supported(void);
 
 #endif /* _SYNAPTICS_H */

arch/blackfin/include/asm/bfin_rotary.h → include/linux/platform_data/bfin_rotary.h

@@ -40,6 +40,7 @@ struct bfin_rotary_platform_data {
 	unsigned short debounce;	/* 0..17 */
 	unsigned short mode;
 	unsigned short pm_wakeup;
+	unsigned short *pin_list;
 };
 
 /* CNT_CONFIG bitmasks */