Commit 1ae842de authored by Alexandre Bounine's avatar Alexandre Bounine Committed by Linus Torvalds

rapidio: modify for rev.3 specification changes

Implement changes made in RapidIO specification rev.3 to LP-Serial Physical
Layer register definitions:

 - use per-port register offset calculations based on LP-Serial Extended
   Features Block (EFB) Register Map type (I or II) with different
   per-port offset step (0x20 vs 0x40 respectfully).

 - remove deprecated Parallel Physical layer definitions and related
   code.

[alexandre.bounine@idt.com: fix DocBook warning for gen3 update]
  Link: http://lkml.kernel.org/r/1469191173-19338-1-git-send-email-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1469125134-16523-12-git-send-email-alexandre.bounine@idt.comSigned-off-by: default avatarAlexandre Bounine <alexandre.bounine@idt.com>
Tested-by: default avatarBarry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent a057a52e
...@@ -1813,7 +1813,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv, ...@@ -1813,7 +1813,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
if (rdev->pef & RIO_PEF_EXT_FEATURES) { if (rdev->pef & RIO_PEF_EXT_FEATURES) {
rdev->efptr = rval & 0xffff; rdev->efptr = rval & 0xffff;
rdev->phys_efptr = rio_mport_get_physefb(mport, 0, destid, rdev->phys_efptr = rio_mport_get_physefb(mport, 0, destid,
hopcount); hopcount, &rdev->phys_rmap);
rdev->em_efptr = rio_mport_get_feature(mport, 0, destid, rdev->em_efptr = rio_mport_get_feature(mport, 0, destid,
hopcount, RIO_EFB_ERR_MGMNT); hopcount, RIO_EFB_ERR_MGMNT);
......
...@@ -2555,11 +2555,11 @@ static int tsi721_query_mport(struct rio_mport *mport, ...@@ -2555,11 +2555,11 @@ static int tsi721_query_mport(struct rio_mport *mport,
struct tsi721_device *priv = mport->priv; struct tsi721_device *priv = mport->priv;
u32 rval; u32 rval;
rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_ERR_STS_CSR(0))); rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0));
if (rval & RIO_PORT_N_ERR_STS_PORT_OK) { if (rval & RIO_PORT_N_ERR_STS_PORT_OK) {
rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL2_CSR(0))); rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0));
attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28; attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28;
rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL_CSR(0))); rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0));
attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27; attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27;
} else } else
attr->link_speed = RIO_LINK_DOWN; attr->link_speed = RIO_LINK_DOWN;
...@@ -2673,9 +2673,9 @@ static int tsi721_setup_mport(struct tsi721_device *priv) ...@@ -2673,9 +2673,9 @@ static int tsi721_setup_mport(struct tsi721_device *priv)
mport->ops = &tsi721_rio_ops; mport->ops = &tsi721_rio_ops;
mport->index = 0; mport->index = 0;
mport->sys_size = 0; /* small system */ mport->sys_size = 0; /* small system */
mport->phy_type = RIO_PHY_SERIAL;
mport->priv = (void *)priv; mport->priv = (void *)priv;
mport->phys_efptr = 0x100; mport->phys_efptr = 0x100;
mport->phys_rmap = 1;
mport->dev.parent = &pdev->dev; mport->dev.parent = &pdev->dev;
mport->dev.release = tsi721_mport_release; mport->dev.release = tsi721_mport_release;
......
...@@ -49,15 +49,6 @@ struct rio_id_table { ...@@ -49,15 +49,6 @@ struct rio_id_table {
static int next_destid = 0; static int next_destid = 0;
static int next_comptag = 1; static int next_comptag = 1;
static int rio_mport_phys_table[] = {
RIO_EFB_PAR_EP_ID,
RIO_EFB_PAR_EP_REC_ID,
RIO_EFB_SER_EP_ID,
RIO_EFB_SER_EP_REC_ID,
-1,
};
/** /**
* rio_destid_alloc - Allocate next available destID for given network * rio_destid_alloc - Allocate next available destID for given network
* @net: RIO network * @net: RIO network
...@@ -380,10 +371,15 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, ...@@ -380,10 +371,15 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
if (rdev->pef & RIO_PEF_EXT_FEATURES) { if (rdev->pef & RIO_PEF_EXT_FEATURES) {
rdev->efptr = result & 0xffff; rdev->efptr = result & 0xffff;
rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid, rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
hopcount); hopcount, &rdev->phys_rmap);
pr_debug("RIO: %s Register Map %d device\n",
__func__, rdev->phys_rmap);
rdev->em_efptr = rio_mport_get_feature(port, 0, destid, rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
hopcount, RIO_EFB_ERR_MGMNT); hopcount, RIO_EFB_ERR_MGMNT);
if (!rdev->em_efptr)
rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
hopcount, RIO_EFB_ERR_MGMNT_HS);
} }
rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR, rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
...@@ -445,7 +441,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, ...@@ -445,7 +441,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0); rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
} else { } else {
if (do_enum) if (do_enum)
/*Enable Input Output Port (transmitter reviever)*/ /*Enable Input Output Port (transmitter receiver)*/
rio_enable_rx_tx_port(port, 0, destid, hopcount, 0); rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);
dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id, dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
...@@ -481,10 +477,8 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, ...@@ -481,10 +477,8 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
/** /**
* rio_sport_is_active- Tests if a switch port has an active connection. * rio_sport_is_active- Tests if a switch port has an active connection.
* @port: Master port to send transaction * @rdev: RapidIO device object
* @destid: Associated destination ID for switch * @sp: Switch port number
* @hopcount: Hopcount to reach switch
* @sport: Switch port number
* *
* Reads the port error status CSR for a particular switch port to * Reads the port error status CSR for a particular switch port to
* determine if the port has an active link. Returns * determine if the port has an active link. Returns
...@@ -492,31 +486,12 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, ...@@ -492,31 +486,12 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
* inactive. * inactive.
*/ */
static int static int
rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport) rio_sport_is_active(struct rio_dev *rdev, int sp)
{ {
u32 result = 0; u32 result = 0;
u32 ext_ftr_ptr;
ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0); rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, sp),
&result);
while (ext_ftr_ptr) {
rio_mport_read_config_32(port, destid, hopcount,
ext_ftr_ptr, &result);
result = RIO_GET_BLOCK_ID(result);
if ((result == RIO_EFB_SER_EP_FREE_ID) ||
(result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
(result == RIO_EFB_SER_EP_FREC_ID))
break;
ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
ext_ftr_ptr);
}
if (ext_ftr_ptr)
rio_mport_read_config_32(port, destid, hopcount,
ext_ftr_ptr +
RIO_PORT_N_ERR_STS_CSR(sport),
&result);
return result & RIO_PORT_N_ERR_STS_PORT_OK; return result & RIO_PORT_N_ERR_STS_PORT_OK;
} }
...@@ -655,9 +630,7 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, ...@@ -655,9 +630,7 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
cur_destid = next_destid; cur_destid = next_destid;
if (rio_sport_is_active if (rio_sport_is_active(rdev, port_num)) {
(port, RIO_ANY_DESTID(port->sys_size), hopcount,
port_num)) {
pr_debug( pr_debug(
"RIO: scanning device on port %d\n", "RIO: scanning device on port %d\n",
port_num); port_num);
...@@ -785,8 +758,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, ...@@ -785,8 +758,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num) if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
continue; continue;
if (rio_sport_is_active if (rio_sport_is_active(rdev, port_num)) {
(port, destid, hopcount, port_num)) {
pr_debug( pr_debug(
"RIO: scanning device on port %d\n", "RIO: scanning device on port %d\n",
port_num); port_num);
...@@ -831,21 +803,11 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, ...@@ -831,21 +803,11 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
static int rio_mport_is_active(struct rio_mport *port) static int rio_mport_is_active(struct rio_mport *port)
{ {
u32 result = 0; u32 result = 0;
u32 ext_ftr_ptr;
int *entry = rio_mport_phys_table;
do {
if ((ext_ftr_ptr =
rio_mport_get_feature(port, 1, 0, 0, *entry)))
break;
} while (*++entry >= 0);
if (ext_ftr_ptr)
rio_local_read_config_32(port,
ext_ftr_ptr +
RIO_PORT_N_ERR_STS_CSR(port->index),
&result);
rio_local_read_config_32(port,
port->phys_efptr +
RIO_PORT_N_ERR_STS_CSR(port->index, port->phys_rmap),
&result);
return result & RIO_PORT_N_ERR_STS_PORT_OK; return result & RIO_PORT_N_ERR_STS_PORT_OK;
} }
......
...@@ -786,10 +786,11 @@ EXPORT_SYMBOL_GPL(rio_unmap_outb_region); ...@@ -786,10 +786,11 @@ EXPORT_SYMBOL_GPL(rio_unmap_outb_region);
* @local: Indicate a local master port or remote device access * @local: Indicate a local master port or remote device access
* @destid: Destination ID of the device * @destid: Destination ID of the device
* @hopcount: Number of switch hops to the device * @hopcount: Number of switch hops to the device
* @rmap: pointer to location to store register map type info
*/ */
u32 u32
rio_mport_get_physefb(struct rio_mport *port, int local, rio_mport_get_physefb(struct rio_mport *port, int local,
u16 destid, u8 hopcount) u16 destid, u8 hopcount, u32 *rmap)
{ {
u32 ext_ftr_ptr; u32 ext_ftr_ptr;
u32 ftr_header; u32 ftr_header;
...@@ -807,14 +808,21 @@ rio_mport_get_physefb(struct rio_mport *port, int local, ...@@ -807,14 +808,21 @@ rio_mport_get_physefb(struct rio_mport *port, int local,
ftr_header = RIO_GET_BLOCK_ID(ftr_header); ftr_header = RIO_GET_BLOCK_ID(ftr_header);
switch (ftr_header) { switch (ftr_header) {
case RIO_EFB_SER_EP_ID_V13P:
case RIO_EFB_SER_EP_REC_ID_V13P:
case RIO_EFB_SER_EP_FREE_ID_V13P:
case RIO_EFB_SER_EP_ID: case RIO_EFB_SER_EP_ID:
case RIO_EFB_SER_EP_REC_ID: case RIO_EFB_SER_EP_REC_ID:
case RIO_EFB_SER_EP_FREE_ID: case RIO_EFB_SER_EP_FREE_ID:
case RIO_EFB_SER_EP_FREC_ID: case RIO_EFB_SER_EP_M1_ID:
case RIO_EFB_SER_EP_SW_M1_ID:
case RIO_EFB_SER_EPF_M1_ID:
case RIO_EFB_SER_EPF_SW_M1_ID:
*rmap = 1;
return ext_ftr_ptr;
case RIO_EFB_SER_EP_M2_ID:
case RIO_EFB_SER_EP_SW_M2_ID:
case RIO_EFB_SER_EPF_M2_ID:
case RIO_EFB_SER_EPF_SW_M2_ID:
*rmap = 2;
return ext_ftr_ptr; return ext_ftr_ptr;
default: default:
...@@ -873,16 +881,16 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) ...@@ -873,16 +881,16 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
u32 regval; u32 regval;
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum), RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
&regval); &regval);
if (lock) if (lock)
regval |= RIO_PORT_N_CTL_LOCKOUT; regval |= RIO_PORT_N_CTL_LOCKOUT;
else else
regval &= ~RIO_PORT_N_CTL_LOCKOUT; regval &= ~RIO_PORT_N_CTL_LOCKOUT;
rio_write_config_32(rdev, rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum), RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
regval); regval);
return 0; return 0;
} }
EXPORT_SYMBOL_GPL(rio_set_port_lockout); EXPORT_SYMBOL_GPL(rio_set_port_lockout);
...@@ -906,6 +914,7 @@ int rio_enable_rx_tx_port(struct rio_mport *port, ...@@ -906,6 +914,7 @@ int rio_enable_rx_tx_port(struct rio_mport *port,
#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS #ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
u32 regval; u32 regval;
u32 ext_ftr_ptr; u32 ext_ftr_ptr;
u32 rmap;
/* /*
* enable rx input tx output port * enable rx input tx output port
...@@ -913,34 +922,29 @@ int rio_enable_rx_tx_port(struct rio_mport *port, ...@@ -913,34 +922,29 @@ int rio_enable_rx_tx_port(struct rio_mport *port,
pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
"%d, port_num = %d)\n", local, destid, hopcount, port_num); "%d, port_num = %d)\n", local, destid, hopcount, port_num);
ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); ext_ftr_ptr = rio_mport_get_physefb(port, local, destid,
hopcount, &rmap);
if (local) { if (local) {
rio_local_read_config_32(port, ext_ftr_ptr + rio_local_read_config_32(port,
RIO_PORT_N_CTL_CSR(0), ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap),
&regval); &regval);
} else { } else {
if (rio_mport_read_config_32(port, destid, hopcount, if (rio_mport_read_config_32(port, destid, hopcount,
ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0) ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
&regval) < 0)
return -EIO; return -EIO;
} }
if (regval & RIO_PORT_N_CTL_P_TYP_SER) { regval = regval | RIO_PORT_N_CTL_EN_RX | RIO_PORT_N_CTL_EN_TX;
/* serial */
regval = regval | RIO_PORT_N_CTL_EN_RX_SER
| RIO_PORT_N_CTL_EN_TX_SER;
} else {
/* parallel */
regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
| RIO_PORT_N_CTL_EN_TX_PAR;
}
if (local) { if (local) {
rio_local_write_config_32(port, ext_ftr_ptr + rio_local_write_config_32(port,
RIO_PORT_N_CTL_CSR(0), regval); ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), regval);
} else { } else {
if (rio_mport_write_config_32(port, destid, hopcount, if (rio_mport_write_config_32(port, destid, hopcount,
ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
regval) < 0)
return -EIO; return -EIO;
} }
#endif #endif
...@@ -1042,14 +1046,14 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) ...@@ -1042,14 +1046,14 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
/* Read from link maintenance response register /* Read from link maintenance response register
* to clear valid bit */ * to clear valid bit */
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum), RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
&regval); &regval);
udelay(50); udelay(50);
} }
/* Issue Input-status command */ /* Issue Input-status command */
rio_write_config_32(rdev, rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum), RIO_DEV_PORT_N_MNT_REQ_CSR(rdev, pnum),
RIO_MNT_REQ_CMD_IS); RIO_MNT_REQ_CMD_IS);
/* Exit if the response is not expected */ /* Exit if the response is not expected */
...@@ -1060,7 +1064,7 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) ...@@ -1060,7 +1064,7 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
while (checkcount--) { while (checkcount--) {
udelay(50); udelay(50);
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum), RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
&regval); &regval);
if (regval & RIO_PORT_N_MNT_RSP_RVAL) { if (regval & RIO_PORT_N_MNT_RSP_RVAL) {
*lnkresp = regval; *lnkresp = regval;
...@@ -1076,6 +1080,13 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) ...@@ -1076,6 +1080,13 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
* @rdev: Pointer to RIO device control structure * @rdev: Pointer to RIO device control structure
* @pnum: Switch port number to clear errors * @pnum: Switch port number to clear errors
* @err_status: port error status (if 0 reads register from device) * @err_status: port error status (if 0 reads register from device)
*
* TODO: Currently this routine is not compatible with recovery process
* specified for idt_gen3 RapidIO switch devices. It has to be reviewed
* to implement universal recovery process that is compatible full range
* off available devices.
* IDT gen3 switch driver now implements HW-specific error handler that
* issues soft port reset to the port to reset ERR_STOP bits and ackIDs.
*/ */
static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
{ {
...@@ -1085,10 +1096,10 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) ...@@ -1085,10 +1096,10 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
if (err_status == 0) if (err_status == 0)
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
&err_status); &err_status);
if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) { if (err_status & RIO_PORT_N_ERR_STS_OUT_ES) {
pr_debug("RIO_EM: servicing Output Error-Stopped state\n"); pr_debug("RIO_EM: servicing Output Error-Stopped state\n");
/* /*
* Send a Link-Request/Input-Status control symbol * Send a Link-Request/Input-Status control symbol
...@@ -1103,7 +1114,7 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) ...@@ -1103,7 +1114,7 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5; far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5;
far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT; far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT;
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum), RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
&regval); &regval);
pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval); pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval);
near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24; near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24;
...@@ -1121,43 +1132,43 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) ...@@ -1121,43 +1132,43 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
* far inbound. * far inbound.
*/ */
rio_write_config_32(rdev, rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum), RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
(near_ackid << 24) | (near_ackid << 24) |
(far_ackid << 8) | far_ackid); (far_ackid << 8) | far_ackid);
/* Align far outstanding/outbound ackIDs with /* Align far outstanding/outbound ackIDs with
* near inbound. * near inbound.
*/ */
far_ackid++; far_ackid++;
if (nextdev) if (!nextdev) {
rio_write_config_32(nextdev, pr_debug("RIO_EM: nextdev pointer == NULL\n");
nextdev->phys_efptr + goto rd_err;
RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)), }
(far_ackid << 24) |
(near_ackid << 8) | near_ackid); rio_write_config_32(nextdev,
else RIO_DEV_PORT_N_ACK_STS_CSR(nextdev,
pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n"); RIO_GET_PORT_NUM(nextdev->swpinfo)),
(far_ackid << 24) |
(near_ackid << 8) | near_ackid);
} }
rd_err: rd_err:
rio_read_config_32(rdev, rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), &err_status);
&err_status);
pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status); pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
} }
if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) { if ((err_status & RIO_PORT_N_ERR_STS_INP_ES) && nextdev) {
pr_debug("RIO_EM: servicing Input Error-Stopped state\n"); pr_debug("RIO_EM: servicing Input Error-Stopped state\n");
rio_get_input_status(nextdev, rio_get_input_status(nextdev,
RIO_GET_PORT_NUM(nextdev->swpinfo), NULL); RIO_GET_PORT_NUM(nextdev->swpinfo), NULL);
udelay(50); udelay(50);
rio_read_config_32(rdev, rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), &err_status);
&err_status);
pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status); pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
} }
return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | return (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0; RIO_PORT_N_ERR_STS_INP_ES)) ? 1 : 0;
} }
/** /**
...@@ -1257,9 +1268,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) ...@@ -1257,9 +1268,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle) if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle)
rdev->rswitch->ops->em_handle(rdev, portnum); rdev->rswitch->ops->em_handle(rdev, portnum);
rio_read_config_32(rdev, rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), &err_status);
&err_status);
pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status); pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) { if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
...@@ -1276,8 +1286,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) ...@@ -1276,8 +1286,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
* Depending on the link partner state, two attempts * Depending on the link partner state, two attempts
* may be needed for successful recovery. * may be needed for successful recovery.
*/ */
if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
RIO_PORT_N_ERR_STS_PW_INP_ES)) { RIO_PORT_N_ERR_STS_INP_ES)) {
if (rio_clr_err_stopped(rdev, portnum, err_status)) if (rio_clr_err_stopped(rdev, portnum, err_status))
rio_clr_err_stopped(rdev, portnum, 0); rio_clr_err_stopped(rdev, portnum, 0);
} }
...@@ -1287,10 +1297,18 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) ...@@ -1287,10 +1297,18 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
rdev->rswitch->port_ok &= ~(1 << portnum); rdev->rswitch->port_ok &= ~(1 << portnum);
rio_set_port_lockout(rdev, portnum, 1); rio_set_port_lockout(rdev, portnum, 1);
if (rdev->phys_rmap == 1) {
rio_write_config_32(rdev, rio_write_config_32(rdev,
rdev->phys_efptr + RIO_DEV_PORT_N_ACK_STS_CSR(rdev, portnum),
RIO_PORT_N_ACK_STS_CSR(portnum),
RIO_PORT_N_ACK_CLEAR); RIO_PORT_N_ACK_CLEAR);
} else {
rio_write_config_32(rdev,
RIO_DEV_PORT_N_OB_ACK_CSR(rdev, portnum),
RIO_PORT_N_OB_ACK_CLEAR);
rio_write_config_32(rdev,
RIO_DEV_PORT_N_IB_ACK_CSR(rdev, portnum),
0);
}
/* Schedule Extraction Service */ /* Schedule Extraction Service */
pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n", pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
...@@ -1319,9 +1337,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) ...@@ -1319,9 +1337,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
} }
/* Clear remaining error bits and Port-Write Pending bit */ /* Clear remaining error bits and Port-Write Pending bit */
rio_write_config_32(rdev, rio_write_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), err_status);
err_status);
return 0; return 0;
} }
...@@ -1372,20 +1389,7 @@ EXPORT_SYMBOL_GPL(rio_mport_get_efb); ...@@ -1372,20 +1389,7 @@ EXPORT_SYMBOL_GPL(rio_mport_get_efb);
* Tell if a device supports a given RapidIO capability. * Tell if a device supports a given RapidIO capability.
* Returns the offset of the requested extended feature * Returns the offset of the requested extended feature
* block within the device's RIO configuration space or * block within the device's RIO configuration space or
* 0 in case the device does not support it. Possible * 0 in case the device does not support it.
* values for @ftr:
*
* %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices
*
* %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices
*
* %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices
*
* %RIO_EFB_SER_EP_ID LP/Serial EP Devices
*
* %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices
*
* %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices
*/ */
u32 u32
rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
......
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid, extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid,
u8 hopcount, int ftr); u8 hopcount, int ftr);
extern u32 rio_mport_get_physefb(struct rio_mport *port, int local, extern u32 rio_mport_get_physefb(struct rio_mport *port, int local,
u16 destid, u8 hopcount); u16 destid, u8 hopcount, u32 *rmap);
extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
u8 hopcount, u32 from); u8 hopcount, u32 from);
extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
......
...@@ -175,12 +175,10 @@ tsi57x_em_init(struct rio_dev *rdev) ...@@ -175,12 +175,10 @@ tsi57x_em_init(struct rio_dev *rdev)
/* Clear all pending interrupts */ /* Clear all pending interrupts */
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
RIO_PORT_N_ERR_STS_CSR(portnum),
&regval); &regval);
rio_write_config_32(rdev, rio_write_config_32(rdev,
rdev->phys_efptr + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
RIO_PORT_N_ERR_STS_CSR(portnum),
regval & 0x07120214); regval & 0x07120214);
rio_read_config_32(rdev, rio_read_config_32(rdev,
...@@ -198,7 +196,7 @@ tsi57x_em_init(struct rio_dev *rdev) ...@@ -198,7 +196,7 @@ tsi57x_em_init(struct rio_dev *rdev)
/* Skip next (odd) port if the current port is in x4 mode */ /* Skip next (odd) port if the current port is in x4 mode */
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
&regval); &regval);
if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4) if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
portnum++; portnum++;
...@@ -221,23 +219,23 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) ...@@ -221,23 +219,23 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
u32 regval; u32 regval;
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
&err_status); &err_status);
if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) && if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
(err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
RIO_PORT_N_ERR_STS_PW_INP_ES))) { RIO_PORT_N_ERR_STS_INP_ES))) {
/* Remove any queued packets by locking/unlocking port */ /* Remove any queued packets by locking/unlocking port */
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
&regval); &regval);
if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) { if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
rio_write_config_32(rdev, rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
regval | RIO_PORT_N_CTL_LOCKOUT); regval | RIO_PORT_N_CTL_LOCKOUT);
udelay(50); udelay(50);
rio_write_config_32(rdev, rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
regval); regval);
} }
...@@ -245,7 +243,7 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) ...@@ -245,7 +243,7 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
* valid bit * valid bit
*/ */
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum), RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, portnum),
&regval); &regval);
/* Send a Packet-Not-Accepted/Link-Request-Input-Status control /* Send a Packet-Not-Accepted/Link-Request-Input-Status control
...@@ -259,8 +257,8 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) ...@@ -259,8 +257,8 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
while (checkcount--) { while (checkcount--) {
udelay(50); udelay(50);
rio_read_config_32(rdev, rio_read_config_32(rdev,
rdev->phys_efptr + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev,
RIO_PORT_N_MNT_RSP_CSR(portnum), portnum),
&regval); &regval);
if (regval & RIO_PORT_N_MNT_RSP_RVAL) if (regval & RIO_PORT_N_MNT_RSP_RVAL)
goto exit_es; goto exit_es;
......
...@@ -163,6 +163,7 @@ enum rio_device_state { ...@@ -163,6 +163,7 @@ enum rio_device_state {
* @dst_ops: Destination operation capabilities * @dst_ops: Destination operation capabilities
* @comp_tag: RIO component tag * @comp_tag: RIO component tag
* @phys_efptr: RIO device extended features pointer * @phys_efptr: RIO device extended features pointer
* @phys_rmap: LP-Serial Register Map Type (1 or 2)
* @em_efptr: RIO Error Management features pointer * @em_efptr: RIO Error Management features pointer
* @dma_mask: Mask of bits of RIO address this device implements * @dma_mask: Mask of bits of RIO address this device implements
* @driver: Driver claiming this device * @driver: Driver claiming this device
...@@ -193,6 +194,7 @@ struct rio_dev { ...@@ -193,6 +194,7 @@ struct rio_dev {
u32 dst_ops; u32 dst_ops;
u32 comp_tag; u32 comp_tag;
u32 phys_efptr; u32 phys_efptr;
u32 phys_rmap;
u32 em_efptr; u32 em_efptr;
u64 dma_mask; u64 dma_mask;
struct rio_driver *driver; /* RIO driver claiming this device */ struct rio_driver *driver; /* RIO driver claiming this device */
...@@ -237,11 +239,6 @@ struct rio_dbell { ...@@ -237,11 +239,6 @@ struct rio_dbell {
void *dev_id; void *dev_id;
}; };
enum rio_phy_type {
RIO_PHY_PARALLEL,
RIO_PHY_SERIAL,
};
/** /**
* struct rio_mport - RIO master port info * struct rio_mport - RIO master port info
* @dbells: List of doorbell events * @dbells: List of doorbell events
...@@ -259,8 +256,8 @@ enum rio_phy_type { ...@@ -259,8 +256,8 @@ enum rio_phy_type {
* @id: Port ID, unique among all ports * @id: Port ID, unique among all ports
* @index: Port index, unique among all port interfaces of the same type * @index: Port index, unique among all port interfaces of the same type
* @sys_size: RapidIO common transport system size * @sys_size: RapidIO common transport system size
* @phy_type: RapidIO phy type
* @phys_efptr: RIO port extended features pointer * @phys_efptr: RIO port extended features pointer
* @phys_rmap: LP-Serial EFB Register Mapping type (1 or 2).
* @name: Port name string * @name: Port name string
* @dev: device structure associated with an mport * @dev: device structure associated with an mport
* @priv: Master port private data * @priv: Master port private data
...@@ -289,8 +286,8 @@ struct rio_mport { ...@@ -289,8 +286,8 @@ struct rio_mport {
* 0 - Small size. 256 devices. * 0 - Small size. 256 devices.
* 1 - Large size, 65536 devices. * 1 - Large size, 65536 devices.
*/ */
enum rio_phy_type phy_type; /* RapidIO phy type */
u32 phys_efptr; u32 phys_efptr;
u32 phys_rmap;
unsigned char name[RIO_MAX_MPORT_NAME]; unsigned char name[RIO_MAX_MPORT_NAME];
struct device dev; struct device dev;
void *priv; /* Master port private data */ void *priv; /* Master port private data */
......
...@@ -42,9 +42,11 @@ ...@@ -42,9 +42,11 @@
#define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */ #define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */
#define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */ #define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */
#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */ #define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */
#define RIO_PEF_DEV32 0x00001000 /* [III] PE supports Common TRansport Dev32 */
#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */ #define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */
#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */ #define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */
#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */ #define RIO_PEF_CTLS 0x00000010 /* [III] Common Transport Large System (< rev.3) */
#define RIO_PEF_DEV16 0x00000010 /* [III] PE Supports Common Transport Dev16 (rev.3) */
#define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */ #define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */
#define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */ #define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */
#define RIO_PEF_ADDR_50 0x00000002 /* [I] 50 bits */ #define RIO_PEF_ADDR_50 0x00000002 /* [I] 50 bits */
...@@ -194,70 +196,101 @@ ...@@ -194,70 +196,101 @@
#define RIO_GET_BLOCK_ID(x) (x & RIO_EFB_ID_MASK) #define RIO_GET_BLOCK_ID(x) (x & RIO_EFB_ID_MASK)
/* Extended Feature Block IDs */ /* Extended Feature Block IDs */
#define RIO_EFB_PAR_EP_ID 0x0001 /* [IV] LP/LVDS EP Devices */ #define RIO_EFB_SER_EP_M1_ID 0x0001 /* [VI] LP-Serial EP Devices, Map I */
#define RIO_EFB_PAR_EP_REC_ID 0x0002 /* [IV] LP/LVDS EP Recovery Devices */ #define RIO_EFB_SER_EP_SW_M1_ID 0x0002 /* [VI] LP-Serial EP w SW Recovery Devices, Map I */
#define RIO_EFB_PAR_EP_FREE_ID 0x0003 /* [IV] LP/LVDS EP Free Devices */ #define RIO_EFB_SER_EPF_M1_ID 0x0003 /* [VI] LP-Serial EP Free Devices, Map I */
#define RIO_EFB_SER_EP_ID_V13P 0x0001 /* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */ #define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP-Serial EP Devices, RIO 1.2 */
#define RIO_EFB_SER_EP_REC_ID_V13P 0x0002 /* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */ #define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP-Serial EP w SW Recovery Devices, RIO 1.2 */
#define RIO_EFB_SER_EP_FREE_ID_V13P 0x0003 /* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */ #define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP-Serial EP Free Devices, RIO 1.2 */
#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */
#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */
#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */
#define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */
#define RIO_EFB_ERR_MGMNT 0x0007 /* [VIII] Error Management Extensions */ #define RIO_EFB_ERR_MGMNT 0x0007 /* [VIII] Error Management Extensions */
#define RIO_EFB_SER_EPF_SW_M1_ID 0x0009 /* [VI] LP-Serial EP Free w SW Recovery Devices, Map I */
#define RIO_EFB_SW_ROUTING_TBL 0x000E /* [III] Switch Routing Table Block */
#define RIO_EFB_SER_EP_M2_ID 0x0011 /* [VI] LP-Serial EP Devices, Map II */
#define RIO_EFB_SER_EP_SW_M2_ID 0x0012 /* [VI] LP-Serial EP w SW Recovery Devices, Map II */
#define RIO_EFB_SER_EPF_M2_ID 0x0013 /* [VI] LP-Serial EP Free Devices, Map II */
#define RIO_EFB_ERR_MGMNT_HS 0x0017 /* [VIII] Error Management Extensions, Hot-Swap only */
#define RIO_EFB_SER_EPF_SW_M2_ID 0x0019 /* [VI] LP-Serial EP Free w SW Recovery Devices, Map II */
/* /*
* Physical 8/16 LP-LVDS * Physical LP-Serial Registers Definitions
* ID=0x0001, Generic End Point Devices * Parameters in register macros:
* ID=0x0002, Generic End Point Devices, software assisted recovery option * n - port number, m - Register Map Type (1 or 2)
* ID=0x0003, Generic End Point Free Devices
*
* Physical LP-Serial
* ID=0x0004, Generic End Point Devices
* ID=0x0005, Generic End Point Devices, software assisted recovery option
* ID=0x0006, Generic End Point Free Devices
*/ */
#define RIO_PORT_MNT_HEADER 0x0000 #define RIO_PORT_MNT_HEADER 0x0000
#define RIO_PORT_REQ_CTL_CSR 0x0020 #define RIO_PORT_REQ_CTL_CSR 0x0020
#define RIO_PORT_RSP_CTL_CSR 0x0024 /* 0x0001/0x0002 */ #define RIO_PORT_RSP_CTL_CSR 0x0024
#define RIO_PORT_LINKTO_CTL_CSR 0x0020 /* Serial */ #define RIO_PORT_LINKTO_CTL_CSR 0x0020
#define RIO_PORT_RSPTO_CTL_CSR 0x0024 /* Serial */ #define RIO_PORT_RSPTO_CTL_CSR 0x0024
#define RIO_PORT_GEN_CTL_CSR 0x003c #define RIO_PORT_GEN_CTL_CSR 0x003c
#define RIO_PORT_GEN_HOST 0x80000000 #define RIO_PORT_GEN_HOST 0x80000000
#define RIO_PORT_GEN_MASTER 0x40000000 #define RIO_PORT_GEN_MASTER 0x40000000
#define RIO_PORT_GEN_DISCOVERED 0x20000000 #define RIO_PORT_GEN_DISCOVERED 0x20000000
#define RIO_PORT_N_MNT_REQ_CSR(x) (0x0040 + x*0x20) /* 0x0002 */ #define RIO_PORT_N_MNT_REQ_CSR(n, m) (0x40 + (n) * (0x20 * (m)))
#define RIO_MNT_REQ_CMD_RD 0x03 /* Reset-device command */ #define RIO_MNT_REQ_CMD_RD 0x03 /* Reset-device command */
#define RIO_MNT_REQ_CMD_IS 0x04 /* Input-status command */ #define RIO_MNT_REQ_CMD_IS 0x04 /* Input-status command */
#define RIO_PORT_N_MNT_RSP_CSR(x) (0x0044 + x*0x20) /* 0x0002 */ #define RIO_PORT_N_MNT_RSP_CSR(n, m) (0x44 + (n) * (0x20 * (m)))
#define RIO_PORT_N_MNT_RSP_RVAL 0x80000000 /* Response Valid */ #define RIO_PORT_N_MNT_RSP_RVAL 0x80000000 /* Response Valid */
#define RIO_PORT_N_MNT_RSP_ASTAT 0x000007e0 /* ackID Status */ #define RIO_PORT_N_MNT_RSP_ASTAT 0x000007e0 /* ackID Status */
#define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f /* Link Status */ #define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f /* Link Status */
#define RIO_PORT_N_ACK_STS_CSR(x) (0x0048 + x*0x20) /* 0x0002 */ #define RIO_PORT_N_ACK_STS_CSR(n) (0x48 + (n) * 0x20) /* Only in RM-I */
#define RIO_PORT_N_ACK_CLEAR 0x80000000 #define RIO_PORT_N_ACK_CLEAR 0x80000000
#define RIO_PORT_N_ACK_INBOUND 0x3f000000 #define RIO_PORT_N_ACK_INBOUND 0x3f000000
#define RIO_PORT_N_ACK_OUTSTAND 0x00003f00 #define RIO_PORT_N_ACK_OUTSTAND 0x00003f00
#define RIO_PORT_N_ACK_OUTBOUND 0x0000003f #define RIO_PORT_N_ACK_OUTBOUND 0x0000003f
#define RIO_PORT_N_CTL2_CSR(x) (0x0054 + x*0x20) #define RIO_PORT_N_CTL2_CSR(n, m) (0x54 + (n) * (0x20 * (m)))
#define RIO_PORT_N_CTL2_SEL_BAUD 0xf0000000 #define RIO_PORT_N_CTL2_SEL_BAUD 0xf0000000
#define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20) #define RIO_PORT_N_ERR_STS_CSR(n, m) (0x58 + (n) * (0x20 * (m)))
#define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000 /* Output Error-stopped */ #define RIO_PORT_N_ERR_STS_OUT_ES 0x00010000 /* Output Error-stopped */
#define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100 /* Input Error-stopped */ #define RIO_PORT_N_ERR_STS_INP_ES 0x00000100 /* Input Error-stopped */
#define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010 /* Port-Write Pending */ #define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010 /* Port-Write Pending */
#define RIO_PORT_N_ERR_STS_PORT_UA 0x00000008 /* Port Unavailable */
#define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004 #define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004
#define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002 #define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002
#define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001 #define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001
#define RIO_PORT_N_CTL_CSR(x) (0x005c + x*0x20) #define RIO_PORT_N_CTL_CSR(n, m) (0x5c + (n) * (0x20 * (m)))
#define RIO_PORT_N_CTL_PWIDTH 0xc0000000 #define RIO_PORT_N_CTL_PWIDTH 0xc0000000
#define RIO_PORT_N_CTL_PWIDTH_1 0x00000000 #define RIO_PORT_N_CTL_PWIDTH_1 0x00000000
#define RIO_PORT_N_CTL_PWIDTH_4 0x40000000 #define RIO_PORT_N_CTL_PWIDTH_4 0x40000000
#define RIO_PORT_N_CTL_IPW 0x38000000 /* Initialized Port Width */ #define RIO_PORT_N_CTL_IPW 0x38000000 /* Initialized Port Width */
#define RIO_PORT_N_CTL_P_TYP_SER 0x00000001 #define RIO_PORT_N_CTL_P_TYP_SER 0x00000001
#define RIO_PORT_N_CTL_LOCKOUT 0x00000002 #define RIO_PORT_N_CTL_LOCKOUT 0x00000002
#define RIO_PORT_N_CTL_EN_RX_SER 0x00200000 #define RIO_PORT_N_CTL_EN_RX 0x00200000
#define RIO_PORT_N_CTL_EN_TX_SER 0x00400000 #define RIO_PORT_N_CTL_EN_TX 0x00400000
#define RIO_PORT_N_CTL_EN_RX_PAR 0x08000000 #define RIO_PORT_N_OB_ACK_CSR(n) (0x60 + (n) * 0x40) /* Only in RM-II */
#define RIO_PORT_N_CTL_EN_TX_PAR 0x40000000 #define RIO_PORT_N_OB_ACK_CLEAR 0x80000000
#define RIO_PORT_N_OB_ACK_OUTSTD 0x00fff000
#define RIO_PORT_N_OB_ACK_OUTBND 0x00000fff
#define RIO_PORT_N_IB_ACK_CSR(n) (0x64 + (n) * 0x40) /* Only in RM-II */
#define RIO_PORT_N_IB_ACK_INBND 0x00000fff
/*
* Device-based helper macros for serial port register access.
* d - pointer to rapidio device object, n - port number
*/
#define RIO_DEV_PORT_N_MNT_REQ_CSR(d, n) \
(d->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(n, d->phys_rmap))
#define RIO_DEV_PORT_N_MNT_RSP_CSR(d, n) \
(d->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(n, d->phys_rmap))
#define RIO_DEV_PORT_N_ACK_STS_CSR(d, n) \
(d->phys_efptr + RIO_PORT_N_ACK_STS_CSR(n))
#define RIO_DEV_PORT_N_CTL2_CSR(d, n) \
(d->phys_efptr + RIO_PORT_N_CTL2_CSR(n, d->phys_rmap))
#define RIO_DEV_PORT_N_ERR_STS_CSR(d, n) \
(d->phys_efptr + RIO_PORT_N_ERR_STS_CSR(n, d->phys_rmap))
#define RIO_DEV_PORT_N_CTL_CSR(d, n) \
(d->phys_efptr + RIO_PORT_N_CTL_CSR(n, d->phys_rmap))
#define RIO_DEV_PORT_N_OB_ACK_CSR(d, n) \
(d->phys_efptr + RIO_PORT_N_OB_ACK_CSR(n))
#define RIO_DEV_PORT_N_IB_ACK_CSR(d, n) \
(d->phys_efptr + RIO_PORT_N_IB_ACK_CSR(n))
/* /*
* Error Management Extensions (RapidIO 1.3+, Part 8) * Error Management Extensions (RapidIO 1.3+, Part 8)
...@@ -268,6 +301,7 @@ ...@@ -268,6 +301,7 @@
/* General EM Registers (Common for all Ports) */ /* General EM Registers (Common for all Ports) */
#define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */ #define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */
#define RIO_EM_EMHS_CAR 0x004 /* EM Functionality CAR */
#define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */ #define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */
#define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */ #define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */
#define REM_LTL_ERR_ILLTRAN 0x08000000 /* Illegal Transaction decode */ #define REM_LTL_ERR_ILLTRAN 0x08000000 /* Illegal Transaction decode */
...@@ -278,15 +312,33 @@ ...@@ -278,15 +312,33 @@
#define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */ #define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */
#define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */ #define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */
#define RIO_EM_LTL_CTRL_CAP 0x01c /* Logical/Transport Layer Control Capture CSR */ #define RIO_EM_LTL_CTRL_CAP 0x01c /* Logical/Transport Layer Control Capture CSR */
#define RIO_EM_LTL_DID32_CAP 0x020 /* Logical/Transport Layer Dev32 DestID Capture CSR */
#define RIO_EM_LTL_SID32_CAP 0x024 /* Logical/Transport Layer Dev32 source ID Capture CSR */
#define RIO_EM_PW_TGT_DEVID 0x028 /* Port-write Target deviceID CSR */ #define RIO_EM_PW_TGT_DEVID 0x028 /* Port-write Target deviceID CSR */
#define RIO_EM_PW_TGT_DEVID_D16M 0xff000000 /* Port-write Target DID16 MSB */
#define RIO_EM_PW_TGT_DEVID_D8 0x00ff0000 /* Port-write Target DID16 LSB or DID8 */
#define RIO_EM_PW_TGT_DEVID_DEV16 0x00008000 /* Port-write Target DID16 LSB or DID8 */
#define RIO_EM_PW_TGT_DEVID_DEV32 0x00004000 /* Port-write Target DID16 LSB or DID8 */
#define RIO_EM_PKT_TTL 0x02c /* Packet Time-to-live CSR */ #define RIO_EM_PKT_TTL 0x02c /* Packet Time-to-live CSR */
#define RIO_EM_PKT_TTL_VAL 0xffff0000 /* Packet Time-to-live value */
#define RIO_EM_PW_TGT32_DEVID 0x030 /* Port-write Dev32 Target deviceID CSR */
#define RIO_EM_PW_TX_CTRL 0x034 /* Port-write Transmission Control CSR */
#define RIO_EM_PW_TX_CTRL_PW_DIS 0x00000001 /* Port-write Transmission Disable bit */
/* Per-Port EM Registers */ /* Per-Port EM Registers */
#define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40) /* Port N Error Detect CSR */ #define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40) /* Port N Error Detect CSR */
#define REM_PED_IMPL_SPEC 0x80000000 #define REM_PED_IMPL_SPEC 0x80000000
#define REM_PED_LINK_OK2U 0x40000000 /* Link OK to Uninit transition */
#define REM_PED_LINK_UPDA 0x20000000 /* Link Uninit Packet Discard Active */
#define REM_PED_LINK_U2OK 0x10000000 /* Link Uninit to OK transition */
#define REM_PED_LINK_TO 0x00000001 #define REM_PED_LINK_TO 0x00000001
#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */ #define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */
#define RIO_EM_PN_ERRRATE_EN_OK2U 0x40000000 /* Enable notification for OK2U */
#define RIO_EM_PN_ERRRATE_EN_UPDA 0x20000000 /* Enable notification for UPDA */
#define RIO_EM_PN_ERRRATE_EN_U2OK 0x10000000 /* Enable notification for U2OK */
#define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40) /* Port N Attributes Capture CSR */ #define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40) /* Port N Attributes Capture CSR */
#define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */ #define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */
#define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40) /* Port N Packet Capture 1 CSR */ #define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40) /* Port N Packet Capture 1 CSR */
...@@ -294,5 +346,50 @@ ...@@ -294,5 +346,50 @@
#define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40) /* Port N Packet Capture 3 CSR */ #define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40) /* Port N Packet Capture 3 CSR */
#define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40) /* Port N Error Rate CSR */ #define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40) /* Port N Error Rate CSR */
#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */ #define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */
#define RIO_EM_PN_LINK_UDT(x) (0x070 + x*0x40) /* Port N Link Uninit Discard Timer CSR */
#define RIO_EM_PN_LINK_UDT_TO 0xffffff00 /* Link Uninit Timeout value */
/*
* Switch Routing Table Register Block ID=0x000E (RapidIO 3.0+, part 3)
* Register offsets are defined from beginning of the block.
*/
/* Broadcast Routing Table Control CSR */
#define RIO_BC_RT_CTL_CSR 0x020
#define RIO_RT_CTL_THREE_LVL 0x80000000
#define RIO_RT_CTL_DEV32_RT_CTRL 0x40000000
#define RIO_RT_CTL_MC_MASK_SZ 0x03000000 /* 3.0+ Part 11: Multicast */
/* Broadcast Level 0 Info CSR */
#define RIO_BC_RT_LVL0_INFO_CSR 0x030
#define RIO_RT_L0I_NUM_GR 0xff000000
#define RIO_RT_L0I_GR_PTR 0x00fffc00
/* Broadcast Level 1 Info CSR */
#define RIO_BC_RT_LVL1_INFO_CSR 0x034
#define RIO_RT_L1I_NUM_GR 0xff000000
#define RIO_RT_L1I_GR_PTR 0x00fffc00
/* Broadcast Level 2 Info CSR */
#define RIO_BC_RT_LVL2_INFO_CSR 0x038
#define RIO_RT_L2I_NUM_GR 0xff000000
#define RIO_RT_L2I_GR_PTR 0x00fffc00
/* Per-Port Routing Table registers.
* Register fields defined in the broadcast section above are
* applicable to the corresponding registers below.
*/
#define RIO_SPx_RT_CTL_CSR(x) (0x040 + (0x20 * x))
#define RIO_SPx_RT_LVL0_INFO_CSR(x) (0x50 + (0x20 * x))
#define RIO_SPx_RT_LVL1_INFO_CSR(x) (0x54 + (0x20 * x))
#define RIO_SPx_RT_LVL2_INFO_CSR(x) (0x58 + (0x20 * x))
/* Register Formats for Routing Table Group entry.
* Register offsets are calculated using GR_PTR field in the corresponding
* table Level_N and group/entry numbers (see RapidIO 3.0+ Part 3).
*/
#define RIO_RT_Ln_ENTRY_IMPL_DEF 0xf0000000
#define RIO_RT_Ln_ENTRY_RTE_VAL 0x000003ff
#define RIO_RT_ENTRY_DROP_PKT 0x300
#endif /* LINUX_RIO_REGS_H */ #endif /* LINUX_RIO_REGS_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment