blackfin: Support L1 SRAM parity checking feature on bf60x

Move code for the SEC faults from the IRQ hanlders into IRQ actions.
refine bfin fault routine handle
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>

arch/blackfin/include/asm/def_LPBlackfin.h

@@ -544,6 +544,7 @@ do { \
 #define DCBS_P			0x04	/* L1 Data Cache Bank Select */
 #define PORT_PREF0_P		0x12	/* DAG0 Port Preference */
 #define PORT_PREF1_P		0x13	/* DAG1 Port Preference */
+#define RDCHK			0x9	/* Enable L1 Parity Check */
 
 /* Masks */
 #define ENDM               0x00000001	/* (doesn't really exist) Enable

arch/blackfin/mach-bf609/Kconfig

@@ -17,6 +17,12 @@ config SEC_IRQ_PRIORITY_LEVELS
 	  Divide the total number of interrupt priority levels into sub-levels.
 	  There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
 
+config L1_PARITY_CHECK
+	bool "Enable L1 parity check"
+	default n
+	help
+	  Enable the L1 parity check in L1 sram. A fault event is raised
+	  when L1 parity error is found.
 
 comment "System Cross Bar Priority Assignment"
 

arch/blackfin/mach-common/cache-c.c

@@ -41,6 +41,16 @@ bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr,
                 unsigned long mem_mask)
 {
 	int i;
+#ifdef CONFIG_L1_PARITY_CHECK
+	u32 ctrl;
+
+	if (cplb_addr == DCPLB_ADDR0) {
+		ctrl = bfin_read32(mem_control) | (1 << RDCHK);
+		CSYNC();
+		bfin_write32(mem_control, ctrl);
+		SSYNC();
+	}
+#endif
 
 	for (i = 0; i < MAX_CPLBS; i++) {
 		bfin_write32(cplb_addr + i * 4, cplb_tbl[i].addr);

arch/blackfin/mach-common/ints-priority.c

@@ -471,13 +471,8 @@ void handle_sec_ssi_fault(uint32_t gstat)
 
 }
 
-void handle_sec_fault(unsigned int irq, struct irq_desc *desc)
+void handle_sec_fault(uint32_t sec_gstat)
 {
-	uint32_t sec_gstat;
-
-	raw_spin_lock(&desc->lock);
-
-	sec_gstat = bfin_read32(SEC_GSTAT);
 	if (sec_gstat & SEC_GSTAT_ERR) {
 
 		switch (sec_gstat & SEC_GSTAT_ERRC) {
@@ -494,18 +489,16 @@ void handle_sec_fault(unsigned int irq, struct irq_desc *desc)
 
 
 	}
-
-	raw_spin_unlock(&desc->lock);
-
-	handle_fasteoi_irq(irq, desc);
 }
 
-void handle_core_fault(unsigned int irq, struct irq_desc *desc)
+static struct irqaction bfin_fault_irq = {
+	.name = "Blackfin fault",
+};
+
+static irqreturn_t bfin_fault_routine(int irq, void *data)
 {
 	struct pt_regs *fp = get_irq_regs();
 
-	raw_spin_lock(&desc->lock);
-
 	switch (irq) {
 	case IRQ_C0_DBL_FAULT:
 		double_fault_c(fp);
@@ -522,11 +515,15 @@ void handle_core_fault(unsigned int irq, struct irq_desc *desc)
 	case IRQ_C0_NMI_L1_PARITY_ERR:
 		panic("Core 0 NMI L1 parity error");
 		break;
+	case IRQ_SEC_ERR:
+		pr_err("SEC error\n");
+		handle_sec_fault(bfin_read32(SEC_GSTAT));
+		break;
 	default:
-		panic("Core 1 fault %d occurs unexpectedly", irq);
+		panic("Unknown fault %d", irq);
 	}
 
-	raw_spin_unlock(&desc->lock);
+	return IRQ_HANDLED;
 }
 #endif /* SEC_GCTL */
 
@@ -1195,11 +1192,6 @@ int __init init_arch_irq(void)
 				handle_percpu_irq);
 		} else {
 			irq_set_chip(irq, &bfin_sec_irqchip);
-			if (irq == IRQ_SEC_ERR)
-				irq_set_handler(irq, handle_sec_fault);
-			else if (irq >= IRQ_C0_DBL_FAULT && irq < CORE_IRQS)
-				irq_set_handler(irq, handle_core_fault);
-			else
 			irq_set_handler(irq, handle_fasteoi_irq);
 			__irq_set_preflow_handler(irq, bfin_sec_preflow_handler);
 		}
@@ -1239,6 +1231,13 @@ int __init init_arch_irq(void)
 	register_syscore_ops(&sec_pm_syscore_ops);
 #endif
 
+	bfin_fault_irq.handler = bfin_fault_routine;
+#ifdef CONFIG_L1_PARITY_CHECK
+	setup_irq(IRQ_C0_NMI_L1_PARITY_ERR, &bfin_fault_irq);
+#endif
+	setup_irq(IRQ_C0_DBL_FAULT, &bfin_fault_irq);
+	setup_irq(IRQ_SEC_ERR, &bfin_fault_irq);
+
 	return 0;
 }