Skip to content

L
linux
Commit 1e3531d2 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'stmmac-next' 

Giuseppe Cavallaro says:

====================
stmmac: update driver documentation

Recently many changes have been done inside the driver
so this patch updates the driver's doc for example reviewing
information for the rx and tx processes that are managed
by napi method, adding new information for missing glue-logic files
etc.
Also this reviews and fixes what is reported when run kernel-doc script.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 355a901e 732fdf0e
Show whitespace changes
Inline Side-by-side
Showing with 215 additions and 136 deletions
Documentation/networking/stmmac.txt
View file @ 1e3531d2
STMicroelectronics 10/100/1000 Synopsys Ethernet driver
Copyright (C) 2007-2013 STMicroelectronics Ltd
Copyright (C) 2007-2014 STMicroelectronics Ltd
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
(Synopsys IP blocks).
Currently this network device driver is for all STM embedded MAC/GMAC
Currently this network device driver is for all STi embedded MAC/GMAC
(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
FF1152AMT0221 D1215994A VIRTEX FPGA board.
......@@ -22,6 +22,9 @@ The kernel configuration option is STMMAC_ETH:
Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
CONFIG_STMMAC_PLATFORM: is to enable the platform driver.
CONFIG_STMMAC_PCI: is to enable the pci driver.
2) Driver parameters list:
debug: message level (0: no output, 16: all);
phyaddr: to manually provide the physical address to the PHY device;
......@@ -45,10 +48,11 @@ Driver parameters can be also passed in command line by using:
The xmit method is invoked when the kernel needs to transmit a packet; it sets
the descriptors in the ring and informs the DMA engine that there is a packet
ready to be transmitted.
Once the controller has finished transmitting the packet, an interrupt is
triggered; So the driver will be able to release the socket buffers.
By default, the driver sets the NETIF_F_SG bit in the features field of the
net_device structure enabling the scatter/gather feature.
net_device structure enabling the scatter-gather feature. This is true on
chips and configurations where the checksum can be done in hardware.
Once the controller has finished transmitting the packet, napi will be
scheduled to release the transmit resources.
4.2) Receive process
When one or more packets are received, an interrupt happens. The interrupts
......@@ -58,20 +62,12 @@ This is based on NAPI so the interrupt handler signals only if there is work
to be done, and it exits.
Then the poll method will be scheduled at some future point.
The incoming packets are stored, by the DMA, in a list of pre-allocated socket
buffers in order to avoid the memcpy (Zero-copy).
buffers in order to avoid the memcpy (zero-copy).
4.3) Interrupt Mitigation
The driver is able to mitigate the number of its DMA interrupts
using NAPI for the reception on chips older than the 3.50.
New chips have an HW RX-Watchdog used for this mitigation.
On Tx-side, the mitigation schema is based on a SW timer that calls the
tx function (stmmac_tx) to reclaim the resource after transmitting the
frames.
Also there is another parameter (like a threshold) used to program
the descriptors avoiding to set the interrupt on completion bit in
when the frame is sent (xmit).
Mitigation parameters can be tuned by ethtool.
4.4) WOL
......@@ -79,7 +75,7 @@ Wake up on Lan feature through Magic and Unicast frames are supported for the
GMAC core.
4.5) DMA descriptors
Driver handles both normal and enhanced descriptors. The latter has been only
Driver handles both normal and alternate descriptors. The latter has been only
tested on DWC Ether MAC 10/100/1000 Universal version 3.41a and later.
STMMAC supports DMA descriptor to operate both in dual buffer (RING)
......@@ -91,9 +87,20 @@ In CHAINED mode each descriptor will have pointer to next descriptor in
the list, hence creating the explicit chaining in the descriptor itself,
whereas such explicit chaining is not possible in RING mode.
4.5.1) Extended descriptors
The extended descriptors give us information about the Ethernet payload
when it is carrying PTP packets or TCP/UDP/ICMP over IP.
These are not available on GMAC Synopsys chips older than the 3.50.
At probe time the driver will decide if these can be actually used.
This support also is mandatory for PTPv2 because the extra descriptors
are used for saving the hardware timestamps and Extended Status.
4.6) Ethtool support
Ethtool is supported. Driver statistics and internal errors can be taken using:
ethtool -S ethX command. It is possible to dump registers etc.
Ethtool is supported.
For example, driver statistics (including RMON), internal errors can be taken
using:
# ethtool -S ethX command
4.7) Jumbo and Segmentation Offloading
Jumbo frames are supported and tested for the GMAC.
......@@ -101,12 +108,11 @@ The GSO has been also added but it's performed in software.
LRO is not supported.
4.8) Physical
The driver is compatible with PAL to work with PHY and GPHY devices.
The driver is compatible with Physical Abstraction Layer to be connected with
PHY and GPHY devices.
4.9) Platform information
Several driver's information can be passed through the platform
These are included in the include/linux/stmmac.h header file
and detailed below as well:
Several information can be passed through the platform and device-tree.
struct plat_stmmacenet_data {
char *phy_bus_name;
......@@ -125,15 +131,18 @@ struct plat_stmmacenet_data {
int force_sf_dma_mode;
int force_thresh_dma_mode;
int riwt_off;
int max_speed;
int maxmtu;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(void __iomem *ioaddr);
void *(*setup)(struct platform_device *pdev);
void (*free)(struct platform_device *pdev, void *priv);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
void *custom_cfg;
void *custom_data;
void *bsp_priv;
};
};
Where:
o phy_bus_name: phy bus name to attach to the stmmac.
......@@ -258,32 +267,43 @@ and the second one, with a real PHY device attached to the bus,
by using the stmmac_mdio_bus_data structure (to provide the id, the
reset procedure etc).
4.10) List of source files:
o Kconfig
o Makefile
o stmmac_main.c: main network device driver;
o stmmac_mdio.c: mdio functions;
o stmmac_pci: PCI driver;
o stmmac_platform.c: platform driver
o stmmac_ethtool.c: ethtool support;
o stmmac_timer.[ch]: timer code used for mitigating the driver dma interrupts
(only tested on ST40 platforms based);
Note that, starting from new chips, where it is available the HW capability
register, many configurations are discovered at run-time for example to
understand if EEE, HW csum, PTP, enhanced descriptor etc are actually
available. As strategy adopted in this driver, the information from the HW
capability register can replace what has been passed from the platform.
4.10) Device-tree support.
Please see the following document:
Documentation/devicetree/bindings/net/stmmac.txt
and the stmmac_of_data structure inside the include/linux/stmmac.h header file.
4.11) This is a summary of the content of some relevant files:
o stmmac_main.c: to implement the main network device driver;
o stmmac_mdio.c: to provide mdio functions;
o stmmac_pci: this the PCI driver;
o stmmac_platform.c: this the platform driver (OF supported)
o stmmac_ethtool.c: to implement the ethtool support;
o stmmac.h: private driver structure;
o common.h: common definitions and VFTs;
o descs.h: descriptor structure definitions;
o dwmac1000_core.c: GMAC core functions;
o dwmac1000_core.c: dwmac GiGa core functions;
o dwmac1000_dma.c: dma functions for the GMAC chip;
o dwmac1000.h: specific header file for the GMAC;
o dwmac100_core: MAC 100 core and dma code;
o dwmac100_dma.c: dma functions for the MAC chip;
o dwmac1000.h: specific header file for the dwmac GiGa;
o dwmac100_core: dwmac 100 core code;
o dwmac100_dma.c: dma functions for the dwmac 100 chip;
o dwmac1000.h: specific header file for the MAC;
o dwmac_lib.c: generic DMA functions shared among chips;
o dwmac_lib.c: generic DMA functions;
o enh_desc.c: functions for handling enhanced descriptors;
o norm_desc.c: functions for handling normal descriptors;
o chain_mode.c/ring_mode.c:: functions to manage RING/CHAINED modes;
o mmc_core.c/mmc.h: Management MAC Counters;
o stmmac_hwtstamp.c: HW timestamp support for PTP
o stmmac_ptp.c: PTP 1588 clock
o stmmac_hwtstamp.c: HW timestamp support for PTP;
o stmmac_ptp.c: PTP 1588 clock;
o dwmac-<XXX>.c: these are for the platform glue-logic file; e.g. dwmac-sti.c
for STMicroelectronics SoCs.
5) Debug Information
......@@ -298,23 +318,14 @@ to get statistics: e.g. using: ethtool -S ethX
(that shows the Management counters (MMC) if supported)
or sees the MAC/DMA registers: e.g. using: ethtool -d ethX
Compiling the Kernel with CONFIG_DEBUG_FS and enabling the
STMMAC_DEBUG_FS option the driver will export the following
Compiling the Kernel with CONFIG_DEBUG_FS the driver will export the following
debugfs entries:
/sys/kernel/debug/stmmaceth/descriptors_status
To show the DMA TX/RX descriptor rings
Developer can also use the "debug" module parameter to get
further debug information.
In the end, there are other macros (that cannot be enabled
via menuconfig) to turn-on the RX/TX DMA debugging,
specific MAC core debug printk etc. Others to enable the
debug in the TX and RX processes.
All these are only useful during the developing stage
and should never enabled inside the code for general usage.
In fact, these can generate an huge amount of debug messages.
Developer can also use the "debug" module parameter to get further debug
information (please see: NETIF Msg Level).
6) Energy Efficient Ethernet
......@@ -337,15 +348,7 @@ To enter in Tx LPI mode the driver needs to have a software timer
that enable and disable the LPI mode when there is nothing to be
transmitted.
7) Extended descriptors
The extended descriptors give us information about the receive Ethernet payload
when it is carrying PTP packets or TCP/UDP/ICMP over IP.
These are not available on GMAC Synopsys chips older than the 3.50.
At probe time the driver will decide if these can be actually used.
This support also is mandatory for PTPv2 because the extra descriptors 6 and 7
are used for saving the hardware timestamps.
8) Precision Time Protocol (PTP)
7) Precision Time Protocol (PTP)
The driver supports the IEEE 1588-2002, Precision Time Protocol (PTP),
which enables precise synchronization of clocks in measurement and
control systems implemented with technologies such as network
......@@ -355,7 +358,7 @@ In addition to the basic timestamp features mentioned in IEEE 1588-2002
Timestamps, new GMAC cores support the advanced timestamp features.
IEEE 1588-2008 that can be enabled when configure the Kernel.
9) SGMII/RGMII supports
8) SGMII/RGMII supports
New GMAC devices provide own way to manage RGMII/SGMII.
This information is available at run-time by looking at the
HW capability register. This means that the stmmac can manage
......@@ -364,8 +367,3 @@ In fact, the HW provides a subset of extended registers to
restart the ANE, verify Full/Half duplex mode and Speed.
Also thanks to these registers it is possible to look at the
Auto-negotiated Link Parter Ability.
10) TODO:
o XGMAC is not supported.
o Complete the TBI & RTBI support.
o extend VLAN support for 3.70a SYNP GMAC.
drivers/net/ethernet/stmicro/stmmac/common.h
View file @ 1e3531d2
......@@ -44,6 +44,7 @@
#undef FRAME_FILTER_DEBUG
/* #define FRAME_FILTER_DEBUG */
/* Extra statistic and debug information exposed by ethtool */
struct stmmac_extra_stats {
/* Transmit errors */
unsigned long tx_underflow ____cacheline_aligned;
......@@ -220,6 +221,7 @@ enum dma_irq_status {
handle_tx = 0x8,
};
/* EEE and LPI defines */
#define CORE_IRQ_TX_PATH_IN_LPI_MODE (1 << 0)
#define CORE_IRQ_TX_PATH_EXIT_LPI_MODE (1 << 1)
#define CORE_IRQ_RX_PATH_IN_LPI_MODE (1 << 2)
......@@ -229,6 +231,7 @@ enum dma_irq_status {
#define CORE_PCS_LINK_STATUS (1 << 6)
#define CORE_RGMII_IRQ (1 << 7)
/* Physical Coding Sublayer */
struct rgmii_adv {
unsigned int pause;
unsigned int duplex;
......@@ -294,6 +297,7 @@ struct dma_features {
#define JUMBO_LEN 9000
/* Descriptors helpers */
struct stmmac_desc_ops {
/* DMA RX descriptor ring initialization */
void (*init_rx_desc) (struct dma_desc *p, int disable_rx_ic, int mode,
......@@ -344,6 +348,7 @@ struct stmmac_desc_ops {
extern const struct stmmac_desc_ops enh_desc_ops;
extern const struct stmmac_desc_ops ndesc_ops;
/* Specific DMA helpers */
struct stmmac_dma_ops {
/* DMA core initialization */
int (*init) (void __iomem *ioaddr, int pbl, int fb, int mb,
......@@ -373,6 +378,7 @@ struct stmmac_dma_ops {
struct mac_device_info;
/* Helpers to program the MAC core */
struct stmmac_ops {
/* MAC core initialization */
void (*core_init)(struct mac_device_info *hw, int mtu);
......@@ -403,6 +409,7 @@ struct stmmac_ops {
void (*get_adv)(struct mac_device_info *hw, struct rgmii_adv *adv);
};
/* PTP and HW Timer helpers */
struct stmmac_hwtimestamp {
void (*config_hw_tstamping) (void __iomem *ioaddr, u32 data);
void (*config_sub_second_increment) (void __iomem *ioaddr);
......@@ -426,6 +433,7 @@ struct mii_regs {
unsigned int data; /* MII Data */
};
/* Helpers to manage the descriptors for chain and ring modes */
struct stmmac_mode_ops {
void (*init) (void *des, dma_addr_t phy_addr, unsigned int size,
unsigned int extend_desc);
......
drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
View file @ 1e3531d2
/**
/*
* dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer
*
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
......@@ -37,9 +37,8 @@
#define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \
iface == PHY_INTERFACE_MODE_GMII)
/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families) */
/**
/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families)
*
* Below table summarizes the clock requirement and clock sources for
* supported phy interface modes with link speeds.
* ________________________________________________
......@@ -78,9 +77,7 @@
#define STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7)
#define STIH4XX_ETH_SEL_TXCLK_NOT_CLK125 BIT(6)
/* STiD127 register definitions */
/**
/* STiD127 register definitions
*-----------------------
* src |BIT(6)| BIT(7)|
*-----------------------
......@@ -106,13 +103,13 @@
#define EN_MASK GENMASK(1, 1)
#define EN BIT(1)
/**
/*
* 3 bits [4:2]
* 000-GMII/MII
* 001-RGMII
* 010-SGMII
* 100-RMII
*/
*/
#define MII_PHY_SEL_MASK GENMASK(4, 2)
#define ETH_PHY_SEL_RMII BIT(4)
#define ETH_PHY_SEL_SGMII BIT(3)
......
drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
View file @ 1e3531d2
/**
/*
* dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer
*
* Copyright (C) 2013 Chen-Yu Tsai
......
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
View file @ 1e3531d2
......@@ -125,8 +125,8 @@ static void stmmac_exit_fs(void);
/**
* stmmac_verify_args - verify the driver parameters.
* Description: it verifies if some wrong parameter is passed to the driver.
* Note that wrong parameters are replaced with the default values.
* Description: it checks the driver parameters and set a default in case of
* errors.
*/
static void stmmac_verify_args(void)
{
......@@ -204,7 +204,7 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
}
/**
* stmmac_hw_fix_mac_speed: callback for speed selection
* stmmac_hw_fix_mac_speed - callback for speed selection
* @priv: driver private structure
* Description: on some platforms (e.g. ST), some HW system configuraton
* registers have to be set according to the link speed negotiated.
......@@ -218,9 +218,10 @@ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
}
/**
* stmmac_enable_eee_mode: Check and enter in LPI mode
* stmmac_enable_eee_mode - check and enter in LPI mode
* @priv: driver private structure
* Description: this function is to verify and enter in LPI mode for EEE.
* Description: this function is to verify and enter in LPI mode in case of
* EEE.
*/
static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
{
......@@ -231,7 +232,7 @@ static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
}
/**
* stmmac_disable_eee_mode: disable/exit from EEE
* stmmac_disable_eee_mode - disable and exit from LPI mode
* @priv: driver private structure
* Description: this function is to exit and disable EEE in case of
* LPI state is true. This is called by the xmit.
......@@ -244,7 +245,7 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv)
}
/**
* stmmac_eee_ctrl_timer: EEE TX SW timer.
* stmmac_eee_ctrl_timer - EEE TX SW timer.
* @arg : data hook
* Description:
* if there is no data transfer and if we are not in LPI state,
......@@ -259,13 +260,12 @@ static void stmmac_eee_ctrl_timer(unsigned long arg)
}
/**
* stmmac_eee_init: init EEE
* stmmac_eee_init - init EEE
* @priv: driver private structure
* Description:
* If the EEE support has been enabled while configuring the driver,
* if the GMAC actually supports the EEE (from the HW cap reg) and the
* phy can also manage EEE, so enable the LPI state and start the timer
* to verify if the tx path can enter in LPI state.
* if the GMAC supports the EEE (from the HW cap reg) and the phy device
* can also manage EEE, this function enable the LPI state and start related
* timer.
*/
bool stmmac_eee_init(struct stmmac_priv *priv)
{
......@@ -332,7 +332,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
return ret;
}
/* stmmac_get_tx_hwtstamp: get HW TX timestamps
/* stmmac_get_tx_hwtstamp - get HW TX timestamps
* @priv: driver private structure
* @entry : descriptor index to be used.
* @skb : the socket buffer
......@@ -374,7 +374,7 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv,
return;
}
/* stmmac_get_rx_hwtstamp: get HW RX timestamps
/* stmmac_get_rx_hwtstamp - get HW RX timestamps
* @priv: driver private structure
* @entry : descriptor index to be used.
* @skb : the socket buffer
......@@ -630,11 +630,11 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
}
/**
* stmmac_init_ptp: init PTP
* stmmac_init_ptp - init PTP
* @priv: driver private structure
* Description: this is to verify if the HW supports the PTPv1 or v2.
* Description: this is to verify if the HW supports the PTPv1 or PTPv2.
* This is done by looking at the HW cap. register.
* Also it registers the ptp driver.
* This function also registers the ptp driver.
*/
static int stmmac_init_ptp(struct stmmac_priv *priv)
{
......@@ -676,9 +676,13 @@ static void stmmac_release_ptp(struct stmmac_priv *priv)
}
/**
* stmmac_adjust_link
* stmmac_adjust_link - adjusts the link parameters
* @dev: net device structure
* Description: it adjusts the link parameters.
* Description: this is the helper called by the physical abstraction layer
* drivers to communicate the phy link status. According the speed and duplex
* this driver can invoke registered glue-logic as well.
* It also invoke the eee initialization because it could happen when switch
* on different networks (that are eee capable).
*/
static void stmmac_adjust_link(struct net_device *dev)
{
......@@ -768,7 +772,7 @@ static void stmmac_adjust_link(struct net_device *dev)
}
/**
* stmmac_check_pcs_mode: verify if RGMII/SGMII is supported
* stmmac_check_pcs_mode - verify if RGMII/SGMII is supported
* @priv: driver private structure
* Description: this is to verify if the HW supports the PCS.
* Physical Coding Sublayer (PCS) interface that can be used when the MAC is
......@@ -857,7 +861,7 @@ static int stmmac_init_phy(struct net_device *dev)
}
/**
* stmmac_display_ring: display ring
* stmmac_display_ring - display ring
* @head: pointer to the head of the ring passed.
* @size: size of the ring.
* @extend_desc: to verify if extended descriptors are used.
......@@ -925,7 +929,7 @@ static int stmmac_set_bfsize(int mtu, int bufsize)
}
/**
* stmmac_clear_descriptors: clear descriptors
* stmmac_clear_descriptors - clear descriptors
* @priv: driver private structure
* Description: this function is called to clear the tx and rx descriptors
* in case of both basic and extended descriptors are used.
......@@ -957,6 +961,15 @@ static void stmmac_clear_descriptors(struct stmmac_priv *priv)
(i == txsize - 1));
}
/**
* stmmac_init_rx_buffers - init the RX descriptor buffer.
* @priv: driver private structure
* @p: descriptor pointer
* @i: descriptor index
* @flags: gfp flag.
* Description: this function is called to allocate a receive buffer, perform
* the DMA mapping and init the descriptor.
*/
static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
int i, gfp_t flags)
{
......@@ -1001,6 +1014,7 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i)
/**
* init_dma_desc_rings - init the RX/TX descriptor rings
* @dev: net device structure
* @flags: gfp flag.
* Description: this function initializes the DMA RX/TX descriptors
* and allocates the socket buffers. It suppors the chained and ring
* modes.
......@@ -1138,6 +1152,14 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv)
}
}
/**
* alloc_dma_desc_resources - alloc TX/RX resources.
* @priv: private structure
* Description: according to which descriptor can be used (extend or basic)
* this function allocates the resources for TX and RX paths. In case of
* reception, for example, it pre-allocated the RX socket buffer in order to
* allow zero-copy mechanism.
*/
static int alloc_dma_desc_resources(struct stmmac_priv *priv)
{
unsigned int txsize = priv->dma_tx_size;
......@@ -1249,8 +1271,8 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
/**
* stmmac_dma_operation_mode - HW DMA operation mode
* @priv: driver private structure
* Description: it sets the DMA operation mode: tx/rx DMA thresholds
* or Store-And-Forward capability.
* Description: it is used for configuring the DMA operation mode register in
* order to program the tx/rx DMA thresholds or Store-And-Forward mode.
*/
static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
{
......@@ -1271,9 +1293,9 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
}
/**
* stmmac_tx_clean:
* stmmac_tx_clean - to manage the transmission completion
* @priv: driver private structure
* Description: it reclaims resources after transmission completes.
* Description: it reclaims the transmit resources after transmission completes.
*/
static void stmmac_tx_clean(struct stmmac_priv *priv)
{
......@@ -1372,10 +1394,10 @@ static inline void stmmac_disable_dma_irq(struct stmmac_priv *priv)
}
/**
* stmmac_tx_err: irq tx error mng function
* stmmac_tx_err - to manage the tx error
* @priv: driver private structure
* Description: it cleans the descriptors and restarts the transmission
* in case of errors.
* in case of transmission errors.
*/
static void stmmac_tx_err(struct stmmac_priv *priv)
{
......@@ -1403,12 +1425,11 @@ static void stmmac_tx_err(struct stmmac_priv *priv)
}
/**
* stmmac_dma_interrupt: DMA ISR
* stmmac_dma_interrupt - DMA ISR
* @priv: driver private structure
* Description: this is the DMA ISR. It is called by the main ISR.
* It calls the dwmac dma routine to understand which type of interrupt
* happened. In case of there is a Normal interrupt and either TX or RX
* interrupt happened so the NAPI is scheduled.
* It calls the dwmac dma routine and schedule poll method in case of some
* work can be done.
*/
static void stmmac_dma_interrupt(struct stmmac_priv *priv)
{
......@@ -1451,6 +1472,12 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv)
pr_info(" No MAC Management Counters available\n");
}
/**
* stmmac_get_synopsys_id - return the SYINID.
* @priv: driver private structure
* Description: this simple function is to decode and return the SYINID
* starting from the HW core register.
*/
static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
{
u32 hwid = priv->hw->synopsys_uid;
......@@ -1469,11 +1496,11 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
}
/**
* stmmac_selec_desc_mode: to select among: normal/alternate/extend descriptors
* stmmac_selec_desc_mode - to select among: normal/alternate/extend descriptors
* @priv: driver private structure
* Description: select the Enhanced/Alternate or Normal descriptors.
* In case of Enhanced/Alternate, it looks at the extended descriptors are
* supported by the HW cap. register.
* In case of Enhanced/Alternate, it checks if the extended descriptors are
* supported by the HW capability register.
*/
static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
{
......@@ -1495,7 +1522,7 @@ static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
}
/**
* stmmac_get_hw_features: get MAC capabilities from the HW cap. register.
* stmmac_get_hw_features - get MAC capabilities from the HW cap. register.
* @priv: driver private structure
* Description:
* new GMAC chip generations have a new register to indicate the
......@@ -1553,7 +1580,7 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv)
}
/**
* stmmac_check_ether_addr: check if the MAC addr is valid
* stmmac_check_ether_addr - check if the MAC addr is valid
* @priv: driver private structure
* Description:
* it is to verify if the MAC address is valid, in case of failures it
......@@ -1572,7 +1599,7 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
}
/**
* stmmac_init_dma_engine: DMA init.
* stmmac_init_dma_engine - DMA init.
* @priv: driver private structure
* Description:
* It inits the DMA invoking the specific MAC/GMAC callback.
......@@ -1601,7 +1628,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
}
/**
* stmmac_tx_timer: mitigation sw timer for tx.
* stmmac_tx_timer - mitigation sw timer for tx.
* @data: data pointer
* Description:
* This is the timer handler to directly invoke the stmmac_tx_clean.
......@@ -1614,7 +1641,7 @@ static void stmmac_tx_timer(unsigned long data)
}
/**
* stmmac_init_tx_coalesce: init tx mitigation options.
* stmmac_init_tx_coalesce - init tx mitigation options.
* @priv: driver private structure
* Description:
* This inits the transmit coalesce parameters: i.e. timer rate,
......@@ -1633,10 +1660,13 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
}
/**
* stmmac_hw_setup: setup mac in a usable state.
* stmmac_hw_setup - setup mac in a usable state.
* @dev : pointer to the device structure.
* Description:
* This function sets up the ip in a usable state.
* this is the main function to setup the HW in a usable state because the
* dma engine is reset, the core registers are configured (e.g. AXI,
* Checksum features, timers). The DMA is ready to start receiving and
* transmitting.
* Return value:
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
......@@ -1874,7 +1904,7 @@ static int stmmac_release(struct net_device *dev)
}
/**
* stmmac_xmit: Tx entry point of the driver
* stmmac_xmit - Tx entry point of the driver
* @skb : the socket buffer
* @dev : device pointer
* Description : this is the tx entry point of the driver.
......@@ -2049,7 +2079,7 @@ static void stmmac_rx_vlan(struct net_device *dev, struct sk_buff *skb)
/**
* stmmac_rx_refill: refill used skb preallocated buffers
* stmmac_rx_refill - refill used skb preallocated buffers
* @priv: driver private structure
* Description : this is to reallocate the skb for the reception process
* that is based on zero-copy.
......@@ -2100,7 +2130,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
}
/**
* stmmac_rx_refill: refill used skb preallocated buffers
* stmmac_rx - manage the receive process
* @priv: driver private structure
* @limit: napi bugget.
* Description : this the function called by the napi poll method.
......@@ -2369,7 +2399,10 @@ static int stmmac_set_features(struct net_device *netdev,
* @irq: interrupt number.
* @dev_id: to pass the net device pointer.
* Description: this is the main driver interrupt service routine.
* It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI
* It can call:
* o DMA service routine (to manage incoming frame reception and transmission
* status)
* o Core interrupts to manage: remote wake-up, management counter, LPI
* interrupts.
*/
static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
......@@ -2657,11 +2690,10 @@ static const struct net_device_ops stmmac_netdev_ops = {
/**
* stmmac_hw_init - Init the MAC device
* @priv: driver private structure
* Description: this function detects which MAC device
* (GMAC/MAC10-100) has to attached, checks the HW capability
* (if supported) and sets the driver's features (for example
* to use the ring or chaine mode or support the normal/enh
* descriptor structure).
* Description: this function is to configure the MAC device according to
* some platform parameters or the HW capability register. It prepares the
* driver to use either ring or chain modes and to setup either enhanced or
* normal descriptors.
*/
static int stmmac_hw_init(struct stmmac_priv *priv)
{
......@@ -2917,6 +2949,13 @@ int stmmac_dvr_remove(struct net_device *ndev)
}
EXPORT_SYMBOL_GPL(stmmac_dvr_remove);
/**
* stmmac_suspend - suspend callback
* @ndev: net device pointer
* Description: this is the function to suspend the device and it is called
* by the platform driver to stop the network queue, release the resources,
* program the PMT register (for WoL), clean and release driver resources.
*/
int stmmac_suspend(struct net_device *ndev)
{
struct stmmac_priv *priv = netdev_priv(ndev);
......@@ -2960,6 +2999,12 @@ int stmmac_suspend(struct net_device *ndev)
}
EXPORT_SYMBOL_GPL(stmmac_suspend);
/**
* stmmac_resume - resume callback
* @ndev: net device pointer
* Description: when resume this function is invoked to setup the DMA and CORE
* in a usable state.
*/
int stmmac_resume(struct net_device *ndev)
{
struct stmmac_priv *priv = netdev_priv(ndev);
......
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
View file @ 1e3531d2
......@@ -51,7 +51,11 @@ MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
#ifdef CONFIG_OF
/* This function validates the number of Multicast filtering bins specified
/**
* dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins
* @mcast_bins: Multicast filtering bins
* Description:
* this function validates the number of Multicast filtering bins specified
* by the configuration through the device tree. The Synopsys GMAC supports
* 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC
* number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds
......@@ -77,7 +81,11 @@ static int dwmac1000_validate_mcast_bins(int mcast_bins)
return x;
}
/* This function validates the number of Unicast address entries supported
/**
* dwmac1000_validate_ucast_entries - validate the Unicast address entries
* @ucast_entries: number of Unicast address entries
* Description:
* This function validates the number of Unicast address entries supported
* by a particular Synopsys 10/100/1000 controller. The Synopsys controller
* supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter
* logic. This function validates a valid, supported configuration is
......@@ -103,6 +111,15 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries)
return x;
}
/**
* stmmac_probe_config_dt - parse device-tree driver parameters
* @pdev: platform_device structure
* @plat: driver data platform structure
* @mac: MAC address to use
* Description:
* this function is to read the driver parameters from device-tree and
* set some private fields that will be used by the main at runtime.
*/
static int stmmac_probe_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat,
const char **mac)
......@@ -242,11 +259,11 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
#endif /* CONFIG_OF */
/**
* stmmac_pltfr_probe
* stmmac_pltfr_probe - platform driver probe.
* @pdev: platform device pointer
* Description: platform_device probe function. It allocates
* the necessary resources and invokes the main to init
* the net device, register the mdio bus etc.
* Description: platform_device probe function. It is to allocate
* the necessary platform resources, invoke custom helper (if required) and
* invoke the main probe function.
*/
static int stmmac_pltfr_probe(struct platform_device *pdev)
{
......@@ -363,6 +380,13 @@ static int stmmac_pltfr_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
/**
* stmmac_pltfr_suspend
* @dev: device pointer
* Description: this function is invoked when suspend the driver and it direcly
* call the main suspend function and then, if required, on some platform, it
* can call an exit helper.
*/
static int stmmac_pltfr_suspend(struct device *dev)
{
int ret;
......@@ -377,6 +401,13 @@ static int stmmac_pltfr_suspend(struct device *dev)
return ret;
}
/**
* stmmac_pltfr_resume
* @dev: device pointer
* Description: this function is invoked when resume the driver before calling
* the main resume function, on some platforms, it can call own init helper
* if required.
*/
static int stmmac_pltfr_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7