Commit 1ea739a5 authored by Lennert Buytenhek's avatar Lennert Buytenhek Committed by Stephen Hemminger

The ixp2000 driver for the enp2611 was developed on a board with

three gigabit ports, but some enp2611 models only have two ports
(and only one onboard PM3386.)  The current driver assumes there
are always three ports and so it doesn't work on the two-port
version of the board at all.

This patch adds a bit of logic to the enp2611 driver to limit the
number of ports to 2 if the second PM3386 isn't detected.
Signed-off-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: default avatarStephen Hemminger <shemminger@osdl.org>
parent 9be2f7c3
......@@ -149,6 +149,8 @@ static void enp2611_check_link_status(unsigned long __dummy)
int status;
dev = nds[i];
if (dev == NULL)
continue;
status = pm3386_is_link_up(i);
if (status && !netif_carrier_ok(dev)) {
......@@ -191,6 +193,7 @@ static void enp2611_set_port_admin_status(int port, int up)
static int __init enp2611_init_module(void)
{
int ports;
int i;
if (!machine_is_enp2611())
......@@ -199,7 +202,8 @@ static int __init enp2611_init_module(void)
caleb_reset();
pm3386_reset();
for (i = 0; i < 3; i++) {
ports = pm3386_port_count();
for (i = 0; i < ports; i++) {
nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
if (nds[i] == NULL) {
while (--i >= 0)
......@@ -215,8 +219,9 @@ static int __init enp2611_init_module(void)
ixp2400_msf_init(&enp2611_msf_parameters);
if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
for (i = 0; i < 3; i++)
if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
for (i = 0; i < ports; i++)
if (nds[i])
free_netdev(nds[i]);
return -EINVAL;
}
......
......@@ -86,39 +86,52 @@ static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
pm3386_reg_write(port >> 1, reg, value);
}
int pm3386_secondary_present(void)
{
return pm3386_reg_read(1, 0) == 0x3386;
}
void pm3386_reset(void)
{
u8 mac[3][6];
int secondary;
secondary = pm3386_secondary_present();
/* Save programmed MAC addresses. */
pm3386_get_mac(0, mac[0]);
pm3386_get_mac(1, mac[1]);
if (secondary)
pm3386_get_mac(2, mac[2]);
/* Assert analog and digital reset. */
pm3386_reg_write(0, 0x002, 0x0060);
if (secondary)
pm3386_reg_write(1, 0x002, 0x0060);
mdelay(1);
/* Deassert analog reset. */
pm3386_reg_write(0, 0x002, 0x0062);
if (secondary)
pm3386_reg_write(1, 0x002, 0x0062);
mdelay(10);
/* Deassert digital reset. */
pm3386_reg_write(0, 0x002, 0x0063);
if (secondary)
pm3386_reg_write(1, 0x002, 0x0063);
mdelay(10);
/* Restore programmed MAC addresses. */
pm3386_set_mac(0, mac[0]);
pm3386_set_mac(1, mac[1]);
if (secondary)
pm3386_set_mac(2, mac[2]);
/* Disable carrier on all ports. */
pm3386_set_carrier(0, 0);
pm3386_set_carrier(1, 0);
if (secondary)
pm3386_set_carrier(2, 0);
}
......@@ -127,6 +140,11 @@ static u16 swaph(u16 x)
return ((x << 8) | (x >> 8)) & 0xffff;
}
int pm3386_port_count(void)
{
return 2 + pm3386_secondary_present();
}
void pm3386_init_port(int port)
{
int pm = port >> 1;
......
......@@ -13,6 +13,7 @@
#define __PM3386_H
void pm3386_reset(void);
int pm3386_port_count(void);
void pm3386_init_port(int port);
void pm3386_get_mac(int port, u8 *mac);
void pm3386_set_mac(int port, u8 *mac);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment