IB/ehca: Make output clearer by removing some debug messages

ehca spits out a lot of debugging information. I had to look closely to
see the "Port 1 is not active" message within all the debug:

eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022)
eHCA scaling code enabled
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active.
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_create_qp ehca_define_sqp() failed rc=ffffffffffffffff
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr rc=ffffffffffffffea pd=c000000b4b5b2420 mr_access_flags=7 fmr_attr=c0000005afd37394
fmr_create failed for FMR 0

Remove a few debug statements so that things are clearer:

eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022)
eHCA scaling code enabled
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active.
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9
fmr_create failed for FMR 0
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/ehca/ehca_mrmw.c

@@ -846,10 +846,6 @@ struct ib_fmr *ehca_alloc_fmr(struct ib_pd *pd,
 alloc_fmr_exit1:
 	ehca_mr_delete(e_fmr);
 alloc_fmr_exit0:
-	if (IS_ERR(ib_fmr))
-		ehca_err(pd->device, "rc=%lx pd=%p mr_access_flags=%x "
-			 "fmr_attr=%p", PTR_ERR(ib_fmr), pd,
-			 mr_access_flags, fmr_attr);
 	return ib_fmr;
 } /* end ehca_alloc_fmr() */
 

drivers/infiniband/hw/ehca/ehca_qp.c

@@ -714,8 +714,6 @@ static struct ehca_qp *internal_create_qp(
 	if (qp_type == IB_QPT_GSI) {
 		h_ret = ehca_define_sqp(shca, my_qp, init_attr);
 		if (h_ret != H_SUCCESS) {
-			ehca_err(pd->device, "ehca_define_sqp() failed rc=%lx",
-				 h_ret);
 			ret = ehca2ib_return_code(h_ret);
 			goto create_qp_exit4;
 		}