drm/i915: Clarify CHV swing margin/deemph bits

CHV display PHY registes have two swing margin/deemph settings. Make it
clear which ones we're using.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -855,8 +855,8 @@ enum punit_power_well {
 
 #define _VLV_TX_DW2_CH0			0x8288
 #define _VLV_TX_DW2_CH1			0x8488
-#define   DPIO_SWING_MARGIN_SHIFT	16
-#define   DPIO_SWING_MARGIN_MASK	(0xff << DPIO_SWING_MARGIN_SHIFT)
+#define   DPIO_SWING_MARGIN000_SHIFT	16
+#define   DPIO_SWING_MARGIN000_MASK	(0xff << DPIO_SWING_MARGIN000_SHIFT)
 #define   DPIO_UNIQ_TRANS_SCALE_SHIFT	8
 #define VLV_TX_DW2(ch) _PORT(ch, _VLV_TX_DW2_CH0, _VLV_TX_DW2_CH1)
 
@@ -864,12 +864,16 @@ enum punit_power_well {
 #define _VLV_TX_DW3_CH1			0x848c
 /* The following bit for CHV phy */
 #define   DPIO_TX_UNIQ_TRANS_SCALE_EN	(1<<27)
+#define   DPIO_SWING_MARGIN101_SHIFT	16
+#define   DPIO_SWING_MARGIN101_MASK	(0xff << DPIO_SWING_MARGIN101_SHIFT)
 #define VLV_TX_DW3(ch) _PORT(ch, _VLV_TX_DW3_CH0, _VLV_TX_DW3_CH1)
 
 #define _VLV_TX_DW4_CH0			0x8290
 #define _VLV_TX_DW4_CH1			0x8490
 #define   DPIO_SWING_DEEMPH9P5_SHIFT	24
 #define   DPIO_SWING_DEEMPH9P5_MASK	(0xff << DPIO_SWING_DEEMPH9P5_SHIFT)
+#define   DPIO_SWING_DEEMPH6P0_SHIFT	16
+#define   DPIO_SWING_DEEMPH6P0_MASK	(0xff << DPIO_SWING_DEEMPH6P0_SHIFT)
 #define VLV_TX_DW4(ch) _PORT(ch, _VLV_TX_DW4_CH0, _VLV_TX_DW4_CH1)
 
 #define _VLV_TX3_DW4_CH0		0x690

drivers/gpu/drm/i915/intel_dp.c

@@ -2649,8 +2649,8 @@ static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp)
 	/* Program swing margin */
 	for (i = 0; i < 4; i++) {
 		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
-		val &= ~DPIO_SWING_MARGIN_MASK;
-		val |= margin_reg_value << DPIO_SWING_MARGIN_SHIFT;
+		val &= ~DPIO_SWING_MARGIN000_MASK;
+		val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
 		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
 	}
 

drivers/gpu/drm/i915/intel_hdmi.c

@@ -1431,8 +1431,8 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 
 	for (i = 0; i < 4; i++) {
 		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
-		val &= ~DPIO_SWING_MARGIN_MASK;
-		val |= 102 << DPIO_SWING_MARGIN_SHIFT;
+		val &= ~DPIO_SWING_MARGIN000_MASK;
+		val |= 102 << DPIO_SWING_MARGIN000_SHIFT;
 		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
 	}