Merge branches 'acpi-ec', 'acpi-soc', 'acpi-pmic' and 'acpi-button'

* acpi-ec:
  ACPI: EC: add support for hardware-reduced systems
  ACPI: EC: tweak naming in preparation for GpioInt support

* acpi-soc:
  ACPI: LPSS: Add dmi quirk for skipping _DEP check for some device-links
  ACPI: LPSS: Add LNXVIDEO -> BYT I2C1 to lpss_device_links
  ACPI: LPSS: Add LNXVIDEO -> BYT I2C7 to lpss_device_links

* acpi-pmic:
  ACPI / PMIC: Add Cherry Trail Crystal Cove PMIC OpRegion driver
  ACPI / PMIC: Add byt prefix to Crystal Cove PMIC OpRegion driver
  ACPI / PMIC: Do not register handlers for unhandled OpRegions

* acpi-button:
  ACPI: button: Remove unused acpi_lid_notifier_[un]register() functions
  ACPI: button: Add DMI quirk for Asus T200TA
  ACPI: button: Add DMI quirk for Medion Akoya E2215T
  ACPI: button: Turn lid_blacklst DMI table into a generic quirk table
  ACPI: button: Allow disabling LID support with the lid_init_state module option
  ACPI: button: Refactor lid_init_state module parsing code

drivers/acpi/Kconfig

@@ -513,11 +513,19 @@ menuconfig PMIC_OPREGION
 	  PMIC chip.
 
 if PMIC_OPREGION
-config CRC_PMIC_OPREGION
-	bool "ACPI operation region support for CrystalCove PMIC"
+config BYTCRC_PMIC_OPREGION
+	bool "ACPI operation region support for Bay Trail Crystal Cove PMIC"
 	depends on INTEL_SOC_PMIC
 	help
-	  This config adds ACPI operation region support for CrystalCove PMIC.
+	  This config adds ACPI operation region support for the Bay Trail
+	  version of the Crystal Cove PMIC.
+
+config CHTCRC_PMIC_OPREGION
+	bool "ACPI operation region support for Cherry Trail Crystal Cove PMIC"
+	depends on INTEL_SOC_PMIC
+	help
+	  This config adds ACPI operation region support for the Cherry Trail
+	  version of the Crystal Cove PMIC.
 
 config XPOWER_PMIC_OPREGION
 	bool "ACPI operation region support for XPower AXP288 PMIC"

drivers/acpi/Makefile

@@ -109,7 +109,8 @@ obj-$(CONFIG_ACPI_APEI)		+= apei/
 obj-$(CONFIG_ACPI_EXTLOG)	+= acpi_extlog.o
 
 obj-$(CONFIG_PMIC_OPREGION)	+= pmic/intel_pmic.o
-obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
+obj-$(CONFIG_BYTCRC_PMIC_OPREGION) += pmic/intel_pmic_bytcrc.o
+obj-$(CONFIG_CHTCRC_PMIC_OPREGION) += pmic/intel_pmic_chtcrc.o
 obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
 obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o
 obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o

drivers/acpi/acpi_lpss.c

@@ -10,6 +10,7 @@
 #include <linux/acpi.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
+#include <linux/dmi.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/mutex.h>
@@ -463,6 +464,18 @@ struct lpss_device_links {
 	const char *consumer_hid;
 	const char *consumer_uid;
 	u32 flags;
+	const struct dmi_system_id *dep_missing_ids;
+};
+
+/* Please keep this list sorted alphabetically by vendor and model */
+static const struct dmi_system_id i2c1_dep_missing_dmi_ids[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
+		},
+	},
+	{}
 };
 
 /*
@@ -473,9 +486,17 @@ struct lpss_device_links {
  * the supplier is not enumerated until after the consumer is probed.
  */
 static const struct lpss_device_links lpss_device_links[] = {
+	/* CHT External sdcard slot controller depends on PMIC I2C ctrl */
 	{"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
+	/* CHT iGPU depends on PMIC I2C controller */
 	{"808622C1", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
+	/* BYT iGPU depends on the Embedded Controller I2C controller (UID 1) */
+	{"80860F41", "1", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME,
+	 i2c1_dep_missing_dmi_ids},
+	/* BYT CR iGPU depends on PMIC I2C controller (UID 5 on CR) */
 	{"80860F41", "5", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
+	/* BYT iGPU depends on PMIC I2C controller (UID 7 on non CR) */
+	{"80860F41", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 };
 
 static bool hid_uid_match(struct acpi_device *adev,
@@ -570,7 +591,8 @@ static void acpi_lpss_link_consumer(struct device *dev1,
 	if (!dev2)
 		return;
 
-	if (acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
+	if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids))
+	    || acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
 		device_link_add(dev2, dev1, link->flags);
 
 	put_device(dev2);
@@ -585,7 +607,8 @@ static void acpi_lpss_link_supplier(struct device *dev1,
 	if (!dev2)
 		return;
 
-	if (acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
+	if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids))
+	    || acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
 		device_link_add(dev1, dev2, link->flags);
 
 	put_device(dev2);

drivers/acpi/button.c

@@ -44,9 +44,19 @@
 #define ACPI_BUTTON_DEVICE_NAME_LID	"Lid Switch"
 #define ACPI_BUTTON_TYPE_LID		0x05
 
-#define ACPI_BUTTON_LID_INIT_IGNORE	0x00
-#define ACPI_BUTTON_LID_INIT_OPEN	0x01
-#define ACPI_BUTTON_LID_INIT_METHOD	0x02
+enum {
+	ACPI_BUTTON_LID_INIT_IGNORE,
+	ACPI_BUTTON_LID_INIT_OPEN,
+	ACPI_BUTTON_LID_INIT_METHOD,
+	ACPI_BUTTON_LID_INIT_DISABLED,
+};
+
+static const char * const lid_init_state_str[] = {
+	[ACPI_BUTTON_LID_INIT_IGNORE]		= "ignore",
+	[ACPI_BUTTON_LID_INIT_OPEN]		= "open",
+	[ACPI_BUTTON_LID_INIT_METHOD]		= "method",
+	[ACPI_BUTTON_LID_INIT_DISABLED]		= "disabled",
+};
 
 #define _COMPONENT		ACPI_BUTTON_COMPONENT
 ACPI_MODULE_NAME("button");
@@ -65,18 +75,39 @@ static const struct acpi_device_id button_device_ids[] = {
 };
 MODULE_DEVICE_TABLE(acpi, button_device_ids);
 
-/*
- * Some devices which don't even have a lid in anyway have a broken _LID
- * method (e.g. pointing to a floating gpio pin) causing spurious LID events.
- */
-static const struct dmi_system_id lid_blacklst[] = {
+/* Please keep this list sorted alphabetically by vendor and model */
+static const struct dmi_system_id dmi_lid_quirks[] = {
+	{
+		/*
+		 * Asus T200TA, _LID keeps reporting closed after every second
+		 * openening of the lid. Causing immediate re-suspend after
+		 * opening every other open. Using LID_INIT_OPEN fixes this.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
+		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
+	},
 	{
-		/* GP-electronic T701 */
+		/* GP-electronic T701, _LID method points to a floating GPIO */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "T701"),
 			DMI_MATCH(DMI_BIOS_VERSION, "BYT70A.YNCHENG.WIN.007"),
 		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
+	},
+	{
+		/*
+		 * Medion Akoya E2215T, notification of the LID device only
+		 * happens on close, not on open and _LID always returns closed.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2215T MD60198"),
+		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
 	},
 	{}
 };
@@ -116,9 +147,8 @@ struct acpi_button {
 	bool suspended;
 };
 
-static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
-static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
+static long lid_init_state = -1;
 
 static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
@@ -146,7 +176,6 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 static int acpi_lid_notify_state(struct acpi_device *device, int state)
 {
 	struct acpi_button *button = acpi_driver_data(device);
-	int ret;
 	ktime_t next_report;
 	bool do_update;
 
@@ -223,18 +252,7 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 		button->last_time = ktime_get();
 	}
 
-	ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
-	if (ret == NOTIFY_DONE)
-		ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
-						   device);
-	if (ret == NOTIFY_DONE || ret == NOTIFY_OK) {
-		/*
-		 * It is also regarded as success if the notifier_chain
-		 * returns NOTIFY_OK or NOTIFY_DONE.
-		 */
-		ret = 0;
-	}
-	return ret;
+	return 0;
 }
 
 static int __maybe_unused acpi_button_state_seq_show(struct seq_file *seq,
@@ -331,18 +349,6 @@ static int acpi_button_remove_fs(struct acpi_device *device)
 /* --------------------------------------------------------------------------
                                 Driver Interface
    -------------------------------------------------------------------------- */
-int acpi_lid_notifier_register(struct notifier_block *nb)
-{
-	return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
-}
-EXPORT_SYMBOL(acpi_lid_notifier_register);
-
-int acpi_lid_notifier_unregister(struct notifier_block *nb)
-{
-	return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
-}
-EXPORT_SYMBOL(acpi_lid_notifier_unregister);
-
 int acpi_lid_open(void)
 {
 	if (!lid_device)
@@ -472,7 +478,8 @@ static int acpi_button_add(struct acpi_device *device)
 	char *name, *class;
 	int error;
 
-	if (!strcmp(hid, ACPI_BUTTON_HID_LID) && dmi_check_system(lid_blacklst))
+	if (!strcmp(hid, ACPI_BUTTON_HID_LID) &&
+	     lid_init_state == ACPI_BUTTON_LID_INIT_DISABLED)
 		return -ENODEV;
 
 	button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
@@ -578,36 +585,30 @@ static int acpi_button_remove(struct acpi_device *device)
 static int param_set_lid_init_state(const char *val,
 				    const struct kernel_param *kp)
 {
-	int result = 0;
-
-	if (!strncmp(val, "open", sizeof("open") - 1)) {
-		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
-		pr_info("Notify initial lid state as open\n");
-	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
-		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
-		pr_info("Notify initial lid state with _LID return value\n");
-	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
-		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
-		pr_info("Do not notify initial lid state\n");
-	} else
-		result = -EINVAL;
-	return result;
+	int i;
+
+	i = sysfs_match_string(lid_init_state_str, val);
+	if (i < 0)
+		return i;
+
+	lid_init_state = i;
+	pr_info("Initial lid state set to '%s'\n", lid_init_state_str[i]);
+	return 0;
 }
 
-static int param_get_lid_init_state(char *buffer,
-				    const struct kernel_param *kp)
+static int param_get_lid_init_state(char *buf, const struct kernel_param *kp)
 {
-	switch (lid_init_state) {
-	case ACPI_BUTTON_LID_INIT_OPEN:
-		return sprintf(buffer, "open");
-	case ACPI_BUTTON_LID_INIT_METHOD:
-		return sprintf(buffer, "method");
-	case ACPI_BUTTON_LID_INIT_IGNORE:
-		return sprintf(buffer, "ignore");
-	default:
-		return sprintf(buffer, "invalid");
-	}
-	return 0;
+	int i, c = 0;
+
+	for (i = 0; i < ARRAY_SIZE(lid_init_state_str); i++)
+		if (i == lid_init_state)
+			c += sprintf(buf + c, "[%s] ", lid_init_state_str[i]);
+		else
+			c += sprintf(buf + c, "%s ", lid_init_state_str[i]);
+
+	buf[c - 1] = '\n'; /* Replace the final space with a newline */
+
+	return c;
 }
 
 module_param_call(lid_init_state,
@@ -617,6 +618,16 @@ MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");
 
 static int acpi_button_register_driver(struct acpi_driver *driver)
 {
+	const struct dmi_system_id *dmi_id;
+
+	if (lid_init_state == -1) {
+		dmi_id = dmi_first_match(dmi_lid_quirks);
+		if (dmi_id)
+			lid_init_state = (long)dmi_id->driver_data;
+		else
+			lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
+	}
+
 	/*
 	 * Modules such as nouveau.ko and i915.ko have a link time dependency
 	 * on acpi_lid_open(), and would therefore not be loadable on ACPI

drivers/acpi/ec.c

@@ -95,12 +95,12 @@ enum {
 	EC_FLAGS_QUERY_ENABLED,		/* Query is enabled */
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_QUERY_GUARDING,	/* Guard for SCI_EVT check */
-	EC_FLAGS_GPE_HANDLER_INSTALLED,	/* GPE handler installed */
+	EC_FLAGS_EVENT_HANDLER_INSTALLED,	/* Event handler installed */
 	EC_FLAGS_EC_HANDLER_INSTALLED,	/* OpReg handler installed */
-	EC_FLAGS_EVT_HANDLER_INSTALLED, /* _Qxx handlers installed */
+	EC_FLAGS_QUERY_METHODS_INSTALLED, /* _Qxx handlers installed */
 	EC_FLAGS_STARTED,		/* Driver is started */
 	EC_FLAGS_STOPPED,		/* Driver is stopped */
-	EC_FLAGS_GPE_MASKED,		/* GPE masked */
+	EC_FLAGS_EVENTS_MASKED,		/* Events masked */
 };
 
 #define ACPI_EC_COMMAND_POLL		0x01 /* Available for command byte */
@@ -397,8 +397,8 @@ static inline void acpi_ec_clear_gpe(struct acpi_ec *ec)
 static void acpi_ec_submit_request(struct acpi_ec *ec)
 {
 	ec->reference_count++;
-	if (test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags) &&
-	    ec->reference_count == 1)
+	if (test_bit(EC_FLAGS_EVENT_HANDLER_INSTALLED, &ec->flags) &&
+	    ec->gpe >= 0 && ec->reference_count == 1)
 		acpi_ec_enable_gpe(ec, true);
 }
 
@@ -407,28 +407,36 @@ static void acpi_ec_complete_request(struct acpi_ec *ec)
 	bool flushed = false;
 
 	ec->reference_count--;
-	if (test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags) &&
-	    ec->reference_count == 0)
+	if (test_bit(EC_FLAGS_EVENT_HANDLER_INSTALLED, &ec->flags) &&
+	    ec->gpe >= 0 && ec->reference_count == 0)
 		acpi_ec_disable_gpe(ec, true);
 	flushed = acpi_ec_flushed(ec);
 	if (flushed)
 		wake_up(&ec->wait);
 }
 
-static void acpi_ec_mask_gpe(struct acpi_ec *ec)
+static void acpi_ec_mask_events(struct acpi_ec *ec)
 {
-	if (!test_bit(EC_FLAGS_GPE_MASKED, &ec->flags)) {
-		acpi_ec_disable_gpe(ec, false);
+	if (!test_bit(EC_FLAGS_EVENTS_MASKED, &ec->flags)) {
+		if (ec->gpe >= 0)
+			acpi_ec_disable_gpe(ec, false);
+		else
+			disable_irq_nosync(ec->irq);
+
 		ec_dbg_drv("Polling enabled");
-		set_bit(EC_FLAGS_GPE_MASKED, &ec->flags);
+		set_bit(EC_FLAGS_EVENTS_MASKED, &ec->flags);
 	}
 }
 
-static void acpi_ec_unmask_gpe(struct acpi_ec *ec)
+static void acpi_ec_unmask_events(struct acpi_ec *ec)
 {
-	if (test_bit(EC_FLAGS_GPE_MASKED, &ec->flags)) {
-		clear_bit(EC_FLAGS_GPE_MASKED, &ec->flags);
-		acpi_ec_enable_gpe(ec, false);
+	if (test_bit(EC_FLAGS_EVENTS_MASKED, &ec->flags)) {
+		clear_bit(EC_FLAGS_EVENTS_MASKED, &ec->flags);
+		if (ec->gpe >= 0)
+			acpi_ec_enable_gpe(ec, false);
+		else
+			enable_irq(ec->irq);
+
 		ec_dbg_drv("Polling disabled");
 	}
 }
@@ -454,7 +462,7 @@ static bool acpi_ec_submit_flushable_request(struct acpi_ec *ec)
 
 static void acpi_ec_submit_query(struct acpi_ec *ec)
 {
-	acpi_ec_mask_gpe(ec);
+	acpi_ec_mask_events(ec);
 	if (!acpi_ec_event_enabled(ec))
 		return;
 	if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) {
@@ -470,7 +478,7 @@ static void acpi_ec_complete_query(struct acpi_ec *ec)
 	if (test_and_clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
 		ec_dbg_evt("Command(%s) unblocked",
 			   acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY));
-	acpi_ec_unmask_gpe(ec);
+	acpi_ec_unmask_events(ec);
 }
 
 static inline void __acpi_ec_enable_event(struct acpi_ec *ec)
@@ -648,7 +656,9 @@ static void advance_transaction(struct acpi_ec *ec)
 	 * ensure a hardware STS 0->1 change after this clearing can always
 	 * trigger a GPE interrupt.
 	 */
-	acpi_ec_clear_gpe(ec);
+	if (ec->gpe >= 0)
+		acpi_ec_clear_gpe(ec);
+
 	status = acpi_ec_read_status(ec);
 	t = ec->curr;
 	/*
@@ -717,7 +727,7 @@ static void advance_transaction(struct acpi_ec *ec)
 				++t->irq_count;
 			/* Allow triggering on 0 threshold */
 			if (t->irq_count == ec_storm_threshold)
-				acpi_ec_mask_gpe(ec);
+				acpi_ec_mask_events(ec);
 		}
 	}
 out:
@@ -815,7 +825,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
 
 	spin_lock_irqsave(&ec->lock, tmp);
 	if (t->irq_count == ec_storm_threshold)
-		acpi_ec_unmask_gpe(ec);
+		acpi_ec_unmask_events(ec);
 	ec_dbg_req("Command(%s) stopped", acpi_ec_cmd_string(t->command));
 	ec->curr = NULL;
 	/* Disable GPE for command processing (IBF=0/OBF=1) */
@@ -1275,18 +1285,28 @@ static void acpi_ec_event_handler(struct work_struct *work)
 	acpi_ec_check_event(ec);
 }
 
-static u32 acpi_ec_gpe_handler(acpi_handle gpe_device,
-	u32 gpe_number, void *data)
+static void acpi_ec_handle_interrupt(struct acpi_ec *ec)
 {
 	unsigned long flags;
-	struct acpi_ec *ec = data;
 
 	spin_lock_irqsave(&ec->lock, flags);
 	advance_transaction(ec);
 	spin_unlock_irqrestore(&ec->lock, flags);
+}
+
+static u32 acpi_ec_gpe_handler(acpi_handle gpe_device,
+			       u32 gpe_number, void *data)
+{
+	acpi_ec_handle_interrupt(data);
 	return ACPI_INTERRUPT_HANDLED;
 }
 
+static irqreturn_t acpi_ec_irq_handler(int irq, void *data)
+{
+	acpi_ec_handle_interrupt(data);
+	return IRQ_HANDLED;
+}
+
 /* --------------------------------------------------------------------------
  *                           Address Space Management
  * -------------------------------------------------------------------------- */
@@ -1359,6 +1379,8 @@ static struct acpi_ec *acpi_ec_alloc(void)
 	ec->timestamp = jiffies;
 	ec->busy_polling = true;
 	ec->polling_guard = 0;
+	ec->gpe = -1;
+	ec->irq = -1;
 	return ec;
 }
 
@@ -1406,9 +1428,13 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
 		/* Get GPE bit assignment (EC events). */
 		/* TODO: Add support for _GPE returning a package */
 		status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
-		if (ACPI_FAILURE(status))
-			return status;
-		ec->gpe = tmp;
+		if (ACPI_SUCCESS(status))
+			ec->gpe = tmp;
+
+		/*
+		 * Errors are non-fatal, allowing for ACPI Reduced Hardware
+		 * platforms which use GpioInt instead of GPE.
+		 */
 	}
 	/* Use the global lock for all EC transactions? */
 	tmp = 0;
@@ -1418,12 +1444,57 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
 	return AE_CTRL_TERMINATE;
 }
 
+static void install_gpe_event_handler(struct acpi_ec *ec)
+{
+	acpi_status status =
+		acpi_install_gpe_raw_handler(NULL, ec->gpe,
+					     ACPI_GPE_EDGE_TRIGGERED,
+					     &acpi_ec_gpe_handler,
+					     ec);
+	if (ACPI_SUCCESS(status)) {
+		/* This is not fatal as we can poll EC events */
+		set_bit(EC_FLAGS_EVENT_HANDLER_INSTALLED, &ec->flags);
+		acpi_ec_leave_noirq(ec);
+		if (test_bit(EC_FLAGS_STARTED, &ec->flags) &&
+		    ec->reference_count >= 1)
+			acpi_ec_enable_gpe(ec, true);
+	}
+}
+
+/* ACPI reduced hardware platforms use a GpioInt specified in _CRS. */
+static int install_gpio_irq_event_handler(struct acpi_ec *ec,
+					  struct acpi_device *device)
+{
+	int irq = acpi_dev_gpio_irq_get(device, 0);
+	int ret;
+
+	if (irq < 0)
+		return irq;
+
+	ret = request_irq(irq, acpi_ec_irq_handler, IRQF_SHARED,
+			  "ACPI EC", ec);
+
+	/*
+	 * Unlike the GPE case, we treat errors here as fatal, we'll only
+	 * implement GPIO polling if we find a case that needs it.
+	 */
+	if (ret < 0)
+		return ret;
+
+	ec->irq = irq;
+	set_bit(EC_FLAGS_EVENT_HANDLER_INSTALLED, &ec->flags);
+	acpi_ec_leave_noirq(ec);
+
+	return 0;
+}
+
 /*
  * Note: This function returns an error code only when the address space
  *       handler is not installed, which means "not able to handle
  *       transactions".
  */
-static int ec_install_handlers(struct acpi_ec *ec, bool handle_events)
+static int ec_install_handlers(struct acpi_ec *ec, struct acpi_device *device,
+			       bool handle_events)
 {
 	acpi_status status;
 
@@ -1456,24 +1527,23 @@ static int ec_install_handlers(struct acpi_ec *ec, bool handle_events)
 	if (!handle_events)
 		return 0;
 
-	if (!test_bit(EC_FLAGS_EVT_HANDLER_INSTALLED, &ec->flags)) {
+	if (!test_bit(EC_FLAGS_QUERY_METHODS_INSTALLED, &ec->flags)) {
 		/* Find and register all query methods */
 		acpi_walk_namespace(ACPI_TYPE_METHOD, ec->handle, 1,
 				    acpi_ec_register_query_methods,
 				    NULL, ec, NULL);
-		set_bit(EC_FLAGS_EVT_HANDLER_INSTALLED, &ec->flags);
+		set_bit(EC_FLAGS_QUERY_METHODS_INSTALLED, &ec->flags);
 	}
-	if (!test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags)) {
-		status = acpi_install_gpe_raw_handler(NULL, ec->gpe,
-					  ACPI_GPE_EDGE_TRIGGERED,
-					  &acpi_ec_gpe_handler, ec);
-		/* This is not fatal as we can poll EC events */
-		if (ACPI_SUCCESS(status)) {
-			set_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags);
-			acpi_ec_leave_noirq(ec);
-			if (test_bit(EC_FLAGS_STARTED, &ec->flags) &&
-			    ec->reference_count >= 1)
-				acpi_ec_enable_gpe(ec, true);
+	if (!test_bit(EC_FLAGS_EVENT_HANDLER_INSTALLED, &ec->flags)) {
+		if (ec->gpe >= 0) {
+			install_gpe_event_handler(ec);
+		} else if (device) {
+			int ret = install_gpio_irq_event_handler(ec, device);
+
+			if (ret)
+				return ret;
+		} else { /* No GPE and no GpioInt? */
+			return -ENODEV;
 		}
 	}
 	/* EC is fully operational, allow queries */
@@ -1504,23 +1574,29 @@ static void ec_remove_handlers(struct acpi_ec *ec)
 	 */
 	acpi_ec_stop(ec, false);
 
-	if (test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags)) {
-		if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
-					&acpi_ec_gpe_handler)))
+	if (test_bit(EC_FLAGS_EVENT_HANDLER_INSTALLED, &ec->flags)) {
+		if (ec->gpe >= 0 &&
+		    ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
+				 &acpi_ec_gpe_handler)))
 			pr_err("failed to remove gpe handler\n");
-		clear_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags);
+
+		if (ec->irq >= 0)
+			free_irq(ec->irq, ec);
+
+		clear_bit(EC_FLAGS_EVENT_HANDLER_INSTALLED, &ec->flags);
 	}
-	if (test_bit(EC_FLAGS_EVT_HANDLER_INSTALLED, &ec->flags)) {
+	if (test_bit(EC_FLAGS_QUERY_METHODS_INSTALLED, &ec->flags)) {
 		acpi_ec_remove_query_handlers(ec, true, 0);
-		clear_bit(EC_FLAGS_EVT_HANDLER_INSTALLED, &ec->flags);
+		clear_bit(EC_FLAGS_QUERY_METHODS_INSTALLED, &ec->flags);
 	}
 }
 
-static int acpi_ec_setup(struct acpi_ec *ec, bool handle_events)
+static int acpi_ec_setup(struct acpi_ec *ec, struct acpi_device *device,
+			 bool handle_events)
 {
 	int ret;
 
-	ret = ec_install_handlers(ec, handle_events);
+	ret = ec_install_handlers(ec, device, handle_events);
 	if (ret)
 		return ret;
 
@@ -1531,8 +1607,8 @@ static int acpi_ec_setup(struct acpi_ec *ec, bool handle_events)
 	}
 
 	acpi_handle_info(ec->handle,
-			 "GPE=0x%x, EC_CMD/EC_SC=0x%lx, EC_DATA=0x%lx\n",
-			 ec->gpe, ec->command_addr, ec->data_addr);
+			 "GPE=0x%x, IRQ=%d, EC_CMD/EC_SC=0x%lx, EC_DATA=0x%lx\n",
+			 ec->gpe, ec->irq, ec->command_addr, ec->data_addr);
 	return ret;
 }
 
@@ -1596,7 +1672,7 @@ static int acpi_ec_add(struct acpi_device *device)
 		}
 	}
 
-	ret = acpi_ec_setup(ec, true);
+	ret = acpi_ec_setup(ec, device, true);
 	if (ret)
 		goto err_query;
 
@@ -1716,7 +1792,7 @@ void __init acpi_ec_dsdt_probe(void)
 	 * At this point, the GPE is not fully initialized, so do not to
 	 * handle the events.
 	 */
-	ret = acpi_ec_setup(ec, false);
+	ret = acpi_ec_setup(ec, NULL, false);
 	if (ret) {
 		acpi_ec_free(ec);
 		return;
@@ -1889,14 +1965,21 @@ void __init acpi_ec_ecdt_probe(void)
 		ec->command_addr = ecdt_ptr->control.address;
 		ec->data_addr = ecdt_ptr->data.address;
 	}
-	ec->gpe = ecdt_ptr->gpe;
+
+	/*
+	 * Ignore the GPE value on Reduced Hardware platforms.
+	 * Some products have this set to an erroneous value.
+	 */
+	if (!acpi_gbl_reduced_hardware)
+		ec->gpe = ecdt_ptr->gpe;
+
 	ec->handle = ACPI_ROOT_OBJECT;
 
 	/*
 	 * At this point, the namespace is not initialized, so do not find
 	 * the namespace objects, or handle the events.
 	 */
-	ret = acpi_ec_setup(ec, false);
+	ret = acpi_ec_setup(ec, NULL, false);
 	if (ret) {
 		acpi_ec_free(ec);
 		return;
@@ -1928,7 +2011,7 @@ static int acpi_ec_suspend_noirq(struct device *dev)
 	 * masked at the low level without side effects.
 	 */
 	if (ec_no_wakeup && test_bit(EC_FLAGS_STARTED, &ec->flags) &&
-	    ec->reference_count >= 1)
+	    ec->gpe >= 0 && ec->reference_count >= 1)
 		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
 
 	acpi_ec_enter_noirq(ec);
@@ -1943,7 +2026,7 @@ static int acpi_ec_resume_noirq(struct device *dev)
 	acpi_ec_leave_noirq(ec);
 
 	if (ec_no_wakeup && test_bit(EC_FLAGS_STARTED, &ec->flags) &&
-	    ec->reference_count >= 1)
+	    ec->gpe >= 0 && ec->reference_count >= 1)
 		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
 
 	return 0;

drivers/acpi/internal.h

@@ -165,7 +165,8 @@ static inline void acpi_early_processor_osc(void) {}
    -------------------------------------------------------------------------- */
 struct acpi_ec {
 	acpi_handle handle;
-	u32 gpe;
+	int gpe;
+	int irq;
 	unsigned long command_addr;
 	unsigned long data_addr;
 	bool global_lock;

drivers/acpi/pmic/intel_pmic.c

@@ -252,7 +252,7 @@ int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
 					struct regmap *regmap,
 					struct intel_pmic_opregion_data *d)
 {
-	acpi_status status;
+	acpi_status status = AE_OK;
 	struct intel_pmic_opregion *opregion;
 	int ret;
 
@@ -270,7 +270,8 @@ int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
 	opregion->regmap = regmap;
 	opregion->lpat_table = acpi_lpat_get_conversion_table(handle);
 
-	status = acpi_install_address_space_handler(handle,
+	if (d->power_table_count)
+		status = acpi_install_address_space_handler(handle,
 						    PMIC_POWER_OPREGION_ID,
 						    intel_pmic_power_handler,
 						    NULL, opregion);
@@ -279,7 +280,8 @@ int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
 		goto out_error;
 	}
 
-	status = acpi_install_address_space_handler(handle,
+	if (d->thermal_table_count)
+		status = acpi_install_address_space_handler(handle,
 						    PMIC_THERMAL_OPREGION_ID,
 						    intel_pmic_thermal_handler,
 						    NULL, opregion);
@@ -301,12 +303,16 @@ int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
 	return 0;
 
 out_remove_thermal_handler:
-	acpi_remove_address_space_handler(handle, PMIC_THERMAL_OPREGION_ID,
-					  intel_pmic_thermal_handler);
+	if (d->thermal_table_count)
+		acpi_remove_address_space_handler(handle,
+						  PMIC_THERMAL_OPREGION_ID,
+						  intel_pmic_thermal_handler);
 
 out_remove_power_handler:
-	acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID,
-					  intel_pmic_power_handler);
+	if (d->power_table_count)
+		acpi_remove_address_space_handler(handle,
+						  PMIC_POWER_OPREGION_ID,
+						  intel_pmic_power_handler);
 
 out_error:
 	acpi_lpat_free_conversion_table(opregion->lpat_table);

drivers/acpi/pmic/intel_pmic_crc.c → drivers/acpi/pmic/intel_pmic_bytcrc.c

 // SPDX-License-Identifier: GPL-2.0
 /*
- * Intel CrystalCove PMIC operation region driver
+ * Intel Bay Trail Crystal Cove PMIC operation region driver
  *
  * Copyright (C) 2014 Intel Corporation. All rights reserved.
  */
@@ -295,7 +295,7 @@ static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
 static struct platform_driver intel_crc_pmic_opregion_driver = {
 	.probe = intel_crc_pmic_opregion_probe,
 	.driver = {
-		.name = "crystal_cove_pmic",
+		.name = "byt_crystal_cove_pmic",
 	},
 };
 builtin_platform_driver(intel_crc_pmic_opregion_driver);

drivers/acpi/pmic/intel_pmic_chtcrc.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Cherry Trail Crystal Cove PMIC operation region driver
+ *
+ * Copyright (C) 2019 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+/*
+ * We have no docs for the CHT Crystal Cove PMIC. The Asus Zenfone-2 kernel
+ * code has 2 Crystal Cove regulator drivers, one calls the PMIC a "Crystal
+ * Cove Plus" PMIC and talks about Cherry Trail, so presuambly that one
+ * could be used to get register info for the regulators if we need to
+ * implement regulator support in the future.
+ *
+ * For now the sole purpose of this driver is to make
+ * intel_soc_pmic_exec_mipi_pmic_seq_element work on devices with a
+ * CHT Crystal Cove PMIC.
+ */
+static struct intel_pmic_opregion_data intel_chtcrc_pmic_opregion_data = {
+	.pmic_i2c_address = 0x6e,
+};
+
+static int intel_chtcrc_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	return intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+			&intel_chtcrc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_chtcrc_pmic_opregion_driver = {
+	.probe = intel_chtcrc_pmic_opregion_probe,
+	.driver = {
+		.name = "cht_crystal_cove_pmic",
+	},
+};
+builtin_platform_driver(intel_chtcrc_pmic_opregion_driver);

drivers/mfd/intel_soc_pmic_crc.c

@@ -75,7 +75,7 @@ static struct mfd_cell crystal_cove_byt_dev[] = {
 		.resources = gpio_resources,
 	},
 	{
-		.name = "crystal_cove_pmic",
+		.name = "byt_crystal_cove_pmic",
 	},
 	{
 		.name = "crystal_cove_pwm",

include/acpi/button.h

@@ -2,21 +2,9 @@
 #ifndef ACPI_BUTTON_H
 #define ACPI_BUTTON_H
 
-#include <linux/notifier.h>
-
 #if IS_ENABLED(CONFIG_ACPI_BUTTON)
-extern int acpi_lid_notifier_register(struct notifier_block *nb);
-extern int acpi_lid_notifier_unregister(struct notifier_block *nb);
 extern int acpi_lid_open(void);
 #else
-static inline int acpi_lid_notifier_register(struct notifier_block *nb)
-{
-	return 0;
-}
-static inline int acpi_lid_notifier_unregister(struct notifier_block *nb)
-{
-	return 0;
-}
 static inline int acpi_lid_open(void)
 {
 	return 1;