ath10k: cleanup setting pdev paramaters

Replace the local variable 'burst_enable' with 'param'
for mapping and setting pdev paraemeters and with this patch
pretty easy to extend support for new parameters adhering to
linux kernel coding guidelines
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/mac.c

@@ -3988,7 +3988,7 @@ static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
 static int ath10k_start(struct ieee80211_hw *hw)
 {
 	struct ath10k *ar = hw->priv;
-	u32 burst_enable;
+	u32 param;
 	int ret = 0;
 
 	/*
@@ -4031,13 +4031,15 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		goto err_power_down;
 	}
 
-	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
+	param = ar->wmi.pdev_param->pmf_qos;
+	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
 	if (ret) {
 		ath10k_warn(ar, "failed to enable PMF QOS: %d\n", ret);
 		goto err_core_stop;
 	}
 
-	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 1);
+	param = ar->wmi.pdev_param->dynamic_bw;
+	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
 	if (ret) {
 		ath10k_warn(ar, "failed to enable dynamic BW: %d\n", ret);
 		goto err_core_stop;
@@ -4053,8 +4055,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
 	}
 
 	if (test_bit(WMI_SERVICE_BURST, ar->wmi.svc_map)) {
-		burst_enable = ar->wmi.pdev_param->burst_enable;
-		ret = ath10k_wmi_pdev_set_param(ar, burst_enable, 0);
+		param = ar->wmi.pdev_param->burst_enable;
+		ret = ath10k_wmi_pdev_set_param(ar, param, 0);
 		if (ret) {
 			ath10k_warn(ar, "failed to disable burst: %d\n", ret);
 			goto err_core_stop;
@@ -4072,8 +4074,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
 	 * this problem.
 	 */
 
-	ret = ath10k_wmi_pdev_set_param(ar,
-					ar->wmi.pdev_param->arp_ac_override, 0);
+	param = ar->wmi.pdev_param->arp_ac_override;
+	ret = ath10k_wmi_pdev_set_param(ar, param, 0);
 	if (ret) {
 		ath10k_warn(ar, "failed to set arp ac override parameter: %d\n",
 			    ret);
@@ -4092,8 +4094,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		}
 	}
 
-	ret = ath10k_wmi_pdev_set_param(ar,
-					ar->wmi.pdev_param->ani_enable, 1);
+	param = ar->wmi.pdev_param->ani_enable;
+	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
 	if (ret) {
 		ath10k_warn(ar, "failed to enable ani by default: %d\n",
 			    ret);