Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is a batch of fixes for arm-soc platforms, most of it is for OMAP
  but there are others too (i.MX, Tegra, ep93xx).  Fixes warnings, some
  broken platforms and drivers, etc.  A bit all over the map really."

There was some concern about commit 68136b10 ("RM: sunxi: Change device
tree naming scheme for sunxi"), but Tony says:
 "Looks like that's trivial to fix as needed, no need to rebuild the
  branch to fix that AFAIK.

  The fix can be done once Olof is available online again.

  Linus, I suggest that you go ahead and pull this if there are no other
  issues with this branch."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: sunxi: Change device tree naming scheme for sunxi
  ARM: ux500: fix missing include
  ARM: u300: delete custom pin hog code
  ARM: davinci: fix build break due to missing include
  ARM: exynos: Fix warning due to missing 'inline' in stub
  ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices
  ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks
  ARM: dts: mx27: Fix the AIPI bus for FEC
  ARM: OMAP2+: common: remove use of vram
  ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
  ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists
  ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider
  ARM: OMAP4: Fix EMU clock domain always on
  ARM: OMAP4460: Workaround ABE DPLL failing to turn-on
  ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
  ARM: OMAP4: Add function table for non-M4X dplls
  ARM: OMAP4: Update timer clock aliases
  ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h
  ARM: dts: Add build target for omap4-panda-a4
  ARM: dts: OMAP2420: Correct H4 board memory size
  ...

arch/arm/boot/dts/Makefile

@@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
+	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
 	omap4-var-som.dtb \
 	omap4-sdp.dtb \
@@ -131,8 +132,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear320-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \
-	sun5i-olinuxino.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+	sun5i-a13-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \

arch/arm/boot/dts/imx27-3ds.dts

@@ -21,17 +21,17 @@ memory {
 	};
 
 	soc {
-		aipi@10000000 { /* aipi */
-
+		aipi@10000000 { /* aipi1 */
 			uart1: serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
+		};
 
-			fec@1002b000 {
+		aipi@10020000 { /* aipi2 */
+			ethernet@1002b000 {
 				status = "okay";
 			};
 		};
 	};
-
 };

arch/arm/boot/dts/imx27-phytec-phycore.dts

@@ -21,8 +21,7 @@ memory {
 	};
 
 	soc {
-		aipi@10000000 { /* aipi */
-
+		aipi@10000000 { /* aipi1 */
 			serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
@@ -38,10 +37,6 @@ serial@1000c000 {
 				status = "okay";
 			};
 
-			ethernet@1002b000 {
-				status = "okay";
-			};
-
 			i2c@1001d000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -60,6 +55,12 @@ lm75@4a {
 				};
 			};
 		};
+
+		aipi@10020000 { /* aipi2 */
+			ethernet@1002b000 {
+				status = "okay";
+			};
+		};
 	};
 
 	nor_flash@c0000000 {

arch/arm/boot/dts/imx27.dtsi

@@ -55,7 +55,7 @@ aipi@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0x10000000 0x10000000>;
+			reg = <0x10000000 0x20000>;
 			ranges;
 
 			wdog: wdog@10002000 {
@@ -211,6 +211,15 @@ i2c2: i2c@1001d000 {
 				status = "disabled";
 			};
 
+		};
+
+		aipi@10020000 { /* AIPI2 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10020000 0x20000>;
+			ranges;
+
 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;

arch/arm/boot/dts/omap2420-h4.dts

@@ -15,6 +15,6 @@ / {
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x84000000>; /* 64 MB */
+		reg = <0x80000000 0x4000000>; /* 64 MB */
 	};
 };

arch/arm/boot/dts/sun4i-cubieboard.dts

@@ -11,11 +11,11 @@
  */
 
 /dts-v1/;
-/include/ "sun4i.dtsi"
+/include/ "sun4i-a10.dtsi"
 
 / {
 	model = "Cubietech Cubieboard";
-	compatible = "cubietech,cubieboard", "allwinner,sun4i";
+	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
 
 	aliases {
 		serial0 = &uart0;

arch/arm/boot/dts/sun5i-olinuxino.dts

@@ -12,11 +12,11 @@
  */
 
 /dts-v1/;
-/include/ "sun5i.dtsi"
+/include/ "sun5i-a13.dtsi"
 
 / {
 	model = "Olimex A13-Olinuxino";
-	compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
 
 	chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";

arch/arm/mach-davinci/board-da850-evm.c

@@ -41,6 +41,7 @@
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
+#include <mach/sram.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-ep93xx/include/mach/uncompress.h

@@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 
 static inline void putc(int c)
 {
-	int i;
-
-	for (i = 0; i < 1000; i++) {
 	/* Transmit fifo not full?  */
-		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
-			break;
-	}
+	while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
+		;
 
 	__raw_writeb(c, PHYS_UART_DATA);
 }

arch/arm/mach-exynos/common.h

@@ -25,7 +25,7 @@ void exynos_init_late(void);
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else
-static int exynos_pm_late_initcall(void) { return 0; }
+static inline int exynos_pm_late_initcall(void) { return 0; }
 #endif
 
 #ifdef CONFIG_ARCH_EXYNOS4

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 			unsigned long rate_ckih1, unsigned long rate_ckih2)
 {
 	int i;
+	u32 val;
 	struct device_node *np;
 
 	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
@@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	imx_print_silicon_rev("i.MX51", mx51_revision());
 	clk_disable_unprepare(clk[iim_gate]);
 
+	/*
+	 * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no
+	 * longer supported. Set to one for better power saving.
+	 *
+	 * The effect of not setting these bits is that MIPI clocks can't be
+	 * enabled without the IPU clock being enabled aswell.
+	 */
+	val = readl(MXC_CCM_CCDR);
+	val |= 1 << 18;
+	writel(val, MXC_CCM_CCDR);
+
+	val = readl(MXC_CCM_CLPCR);
+	val |= 1 << 23;
+	writel(val, MXC_CCM_CLPCR);
+
 	return 0;
 }
 

arch/arm/plat-mxc/devices/platform-mx2-emma.c → arch/arm/mach-imx/devices/platform-mx2-emma.c

@@ -6,8 +6,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_mx2_emmaprp_data_entry_single(soc)				\
 	{								\

arch/arm/mach-omap2/Kconfig

@@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC
 
 config SOC_HAS_REALTIME_COUNTER
 	bool "Real time free running counter"
+	depends on SOC_OMAP5
+	default y
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
@@ -79,7 +81,6 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_SMP
-	select SOC_HAS_REALTIME_COUNTER
 	select COMMON_CLK
 
 comment "OMAP Core Type"

arch/arm/mach-omap2/board-3430sdp.c

@@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device sdp3430_dvi_device = {

arch/arm/mach-omap2/board-am3517evm.c

@@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device am3517_evm_dvi_device = {

arch/arm/mach-omap2/board-cm-t35.c

@@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device cm_t35_dvi_device = {

arch/arm/mach-omap2/board-devkit8000.c

@@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= 1,
 };
 
 static struct omap_dss_device devkit8000_dvi_device = {

arch/arm/mach-omap2/board-h4.c

@@ -27,14 +27,12 @@
 #include <linux/io.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/mfd/menelaus.h>
+#include <linux/omap-dma.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <linux/omap-dma.h>
-#include <plat/debug-devices.h>
-
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 
@@ -42,11 +40,9 @@
 #include "mux.h"
 #include "control.h"
 #include "gpmc.h"
+#include "gpmc-smc91x.h"
 
 #define H4_FLASH_CS	0
-#define H4_SMC91X_CS	1
-
-#define H4_ETHR_GPIO_IRQ		92
 
 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
 static const uint32_t board_matrix_keys[] = {
@@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void)
 		return 0;
 }
 
-static inline void __init h4_init_debug(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int muxed, rate;
-	struct clk *gpmc_fck;
-
-	eth_cs	= H4_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
-
-	clk_prepare_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-	clk_disable_unprepare(gpmc_fck);
-	clk_put(gpmc_fck);
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 1,
+	.gpio_irq	= 92,
+	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL,
+};
 
+static void __init board_smc91x_init(void)
+{
 	if (is_gpmc_muxed())
-		muxed = 0x200;
-	else
-		muxed = 0;
-
-	/* Make sure CS1 timings are correct */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
-			  0x00011000 | muxed);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else {/* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
+		board_smc91x_data.flags |= GPMC_MUX_ADD_DATA;
 
-	udelay(100);
+	omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
 
-	omap_mux_init_gpio(92, 0);
-	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
-		gpmc_cs_free(eth_cs);
+#else
 
-out:
-	clk_disable_unprepare(gpmc_fck);
-	clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
 }
 
+#endif
+
 static void __init h4_init_flash(void)
 {
 	unsigned long base;
@@ -371,6 +327,7 @@ static void __init omap_h4_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 	h4_init_flash();
+	board_smc91x_init();
 
 	omap_display_init(&h4_dss_data);
 }

arch/arm/mach-omap2/board-omap3evm.c

@@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= OMAP3EVM_DVI_PANEL_EN_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device omap3_evm_dvi_device = {

arch/arm/mach-omap2/board-omap3stalker.c

@@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= DSS_ENABLE_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device omap3_stalker_dvi_device = {

arch/arm/mach-omap2/cclock44xx_data.c

@@ -40,6 +40,14 @@
 #define OMAP4430_MODULEMODE_HWCTRL_SHIFT		0
 #define OMAP4430_MODULEMODE_SWCTRL_SHIFT		1
 
+/*
+ * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
+ * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
+ * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
+ * half of this value.
+ */
+#define OMAP4_DPLL_ABE_DEFFREQ				98304000
+
 /* Root clocks */
 
 DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -124,6 +132,8 @@ static struct dpll_data dpll_abe_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.m4xen_mask	= OMAP4430_DPLL_REGM4XEN_MASK,
+	.lpmode_mask	= OMAP4430_DPLL_LPMODE_EN_MASK,
 	.max_multiplier	= 2047,
 	.max_divider	= 128,
 	.min_divider	= 1,
@@ -233,7 +243,7 @@ static struct dpll_data dpll_core_dd = {
 
 
 static const char *dpll_core_ck_parents[] = {
-	"sys_clkin_ck",
+	"sys_clkin_ck", "core_hsd_byp_clk_mux_ck"
 };
 
 static struct clk dpll_core_ck;
@@ -286,9 +296,9 @@ DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0,
 		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT,
 		   OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL);
 
-DEFINE_CLK_OMAP_HSDIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck",
-			  &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA,
-			  OMAP4430_CLKSEL_0_1_MASK);
+DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
+		   0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT,
+		   OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
 
 DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
 		   0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT,
@@ -363,8 +373,21 @@ static struct dpll_data dpll_iva_dd = {
 	.min_divider	= 1,
 };
 
+static const char *dpll_iva_ck_parents[] = {
+	"sys_clkin_ck", "iva_hsd_byp_clk_mux_ck"
+};
+
 static struct clk dpll_iva_ck;
 
+static const struct clk_ops dpll_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+
 static struct clk_hw_omap dpll_iva_ck_hw = {
 	.hw = {
 		.clk = &dpll_iva_ck,
@@ -373,7 +396,7 @@ static struct clk_hw_omap dpll_iva_ck_hw = {
 	.ops		= &clkhwops_omap3_dpll,
 };
 
-DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_core_ck_parents, dpll_abe_ck_ops);
+DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops);
 
 static const char *dpll_iva_x2_ck_parents[] = {
 	"dpll_iva_ck",
@@ -416,6 +439,10 @@ static struct dpll_data dpll_mpu_dd = {
 	.min_divider	= 1,
 };
 
+static const char *dpll_mpu_ck_parents[] = {
+	"sys_clkin_ck", "div_mpu_hs_clk"
+};
+
 static struct clk dpll_mpu_ck;
 
 static struct clk_hw_omap dpll_mpu_ck_hw = {
@@ -426,7 +453,7 @@ static struct clk_hw_omap dpll_mpu_ck_hw = {
 	.ops		= &clkhwops_omap3_dpll,
 };
 
-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_abe_ck_ops);
+DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops);
 
 DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2);
 
@@ -464,6 +491,9 @@ static struct dpll_data dpll_per_dd = {
 	.min_divider	= 1,
 };
 
+static const char *dpll_per_ck_parents[] = {
+	"sys_clkin_ck", "per_hsd_byp_clk_mux_ck"
+};
 
 static struct clk dpll_per_ck;
 
@@ -475,7 +505,7 @@ static struct clk_hw_omap dpll_per_ck_hw = {
 	.ops		= &clkhwops_omap3_dpll,
 };
 
-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_abe_ck_ops);
+DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops);
 
 DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
 		   OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
@@ -559,6 +589,10 @@ static struct dpll_data dpll_usb_dd = {
 	.min_divider	= 1,
 };
 
+static const char *dpll_usb_ck_parents[] = {
+	"sys_clkin_ck", "usb_hs_clk_div_ck"
+};
+
 static struct clk dpll_usb_ck;
 
 static struct clk_hw_omap dpll_usb_ck_hw = {
@@ -569,7 +603,7 @@ static struct clk_hw_omap dpll_usb_ck_hw = {
 	.ops		= &clkhwops_omap3_dpll,
 };
 
-DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_core_ck_parents, dpll_abe_ck_ops);
+DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops);
 
 static const char *dpll_usb_clkdcoldo_ck_parents[] = {
 	"dpll_usb_ck",
@@ -696,9 +730,13 @@ DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
 		   OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
 		   OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
 
+static const char *dbgclk_mux_ck_parents[] = {
+	"sys_clkin_ck"
+};
+
 static struct clk dbgclk_mux_ck;
 DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL);
-DEFINE_STRUCT_CLK(dbgclk_mux_ck, dpll_core_ck_parents,
+DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents,
 		  dpll_usb_clkdcoldo_ck_ops);
 
 /* Leaf clocks controlled by modules */
@@ -1935,10 +1973,10 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("49038000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("40138000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck,	CK_443X),
 };
 
@@ -1955,6 +1993,7 @@ int __init omap4xxx_clk_init(void)
 {
 	u32 cpu_clkflg;
 	struct omap_clk *c;
+	int rc;
 
 	if (cpu_is_omap443x()) {
 		cpu_mask = RATE_IN_4430;
@@ -1983,5 +2022,18 @@ int __init omap4xxx_clk_init(void)
 	omap2_clk_enable_init_clocks(enable_init_clks,
 				     ARRAY_SIZE(enable_init_clks));
 
+	/*
+	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
+	 * state when turning the ABE clock domain. Workaround this by
+	 * locking the ABE DPLL on boot.
+	 */
+	if (cpu_is_omap446x()) {
+		rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+		if (!rc)
+			rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+		if (rc)
+			pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+	}
+
 	return 0;
 }

arch/arm/mach-omap2/clock.h

@@ -195,6 +195,10 @@ struct clksel {
  * @enable_mask: mask of the DPLL mode bitfield in @control_reg
  * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
  * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @last_rounded_m4xen: cache of the last M4X result of
+ *			omap4_dpll_regm4xen_round_rate()
+ * @last_rounded_lpmode: cache of the last lpmode result of
+ *			 omap4_dpll_lpmode_recalc()
  * @max_multiplier: maximum valid non-bypass multiplier value (actual)
  * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
  * @min_divider: minimum valid non-bypass divider value (actual)
@@ -205,6 +209,8 @@ struct clksel {
  * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
  * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
  * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
+ * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
  * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
  * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
  * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
@@ -233,6 +239,8 @@ struct dpll_data {
 	u32			enable_mask;
 	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
+	u8			last_rounded_m4xen;
+	u8			last_rounded_lpmode;
 	u16			max_multiplier;
 	u8			last_rounded_n;
 	u8			min_divider;
@@ -245,6 +253,8 @@ struct dpll_data {
 	u32			idlest_mask;
 	u32			dco_mask;
 	u32			sddiv_mask;
+	u32			lpmode_mask;
+	u32			m4xen_mask;
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;

arch/arm/mach-omap2/clockdomain.c

@@ -998,7 +998,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	spin_lock_irqsave(&clkdm->lock, flags);
 
 	/* corner case: disabling unused clocks */
-	if (__clk_get_enable_count(clk) == 0)
+	if ((__clk_get_enable_count(clk) == 0) &&
+	    (atomic_read(&clkdm->usecount) == 0))
 		goto ccd_exit;
 
 	if (atomic_read(&clkdm->usecount) == 0) {

arch/arm/mach-omap2/common.c

@@ -16,8 +16,6 @@
 #include <linux/init.h>
 #include <linux/platform_data/dsp-omap.h>
 
-#include <plat/vram.h>
-
 #include "common.h"
 #include "omap-secure.h"
 
@@ -32,7 +30,6 @@ int __weak omap_secure_ram_reserve_memblock(void)
 
 void __init omap_reserve(void)
 {
-	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
 	omap_barrier_reserve_memblock();

arch/arm/mach-omap2/cpuidle34xx.c

@@ -40,6 +40,8 @@ struct omap3_idle_statedata {
 	u32 core_state;
 };
 
+static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
+
 static struct omap3_idle_statedata omap3_idle_data[] = {
 	{
 		.mpu_state = PWRDM_POWER_ON,
@@ -71,7 +73,7 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
 	},
 };
 
-static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
+/* Private functions */
 
 static int __omap3_enter_idle(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
@@ -260,9 +262,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	return ret;
 }
 
-DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
+static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
-struct cpuidle_driver omap3_idle_driver = {
+static struct cpuidle_driver omap3_idle_driver = {
 	.name =		"omap3_idle",
 	.owner =	THIS_MODULE,
 	.states = {
@@ -327,6 +329,8 @@ struct cpuidle_driver omap3_idle_driver = {
 	.safe_state_index = 0,
 };
 
+/* Public functions */
+
 /**
  * omap3_idle_init - Init routine for OMAP3 idle
  *

arch/arm/mach-omap2/cpuidle44xx.c

@@ -54,6 +54,8 @@ static struct clockdomain *cpu_clkdm[NR_CPUS];
 static atomic_t abort_barrier;
 static bool cpu_done[NR_CPUS];
 
+/* Private functions */
+
 /**
  * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions
  * @dev: cpuidle device
@@ -161,9 +163,19 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
 	return index;
 }
 
-DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
+/*
+ * For each cpu, setup the broadcast timer because local timers
+ * stops for the states above C1.
+ */
+static void omap_setup_broadcast_timer(void *arg)
+{
+	int cpu = smp_processor_id();
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
+static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
 
-struct cpuidle_driver omap4_idle_driver = {
+static struct cpuidle_driver omap4_idle_driver = {
 	.name				= "omap4_idle",
 	.owner				= THIS_MODULE,
 	.en_core_tk_irqen		= 1,
@@ -200,15 +212,7 @@ struct cpuidle_driver omap4_idle_driver = {
 	.safe_state_index = 0,
 };
 
-/*
- * For each cpu, setup the broadcast timer because local timers
- * stops for the states above C1.
- */
-static void omap_setup_broadcast_timer(void *arg)
-{
-	int cpu = smp_processor_id();
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
-}
+/* Public functions */
 
 /**
  * omap4_idle_init - Init routine for OMAP4 idle

arch/arm/mach-omap2/dpll3xxx.c

@@ -292,15 +292,12 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
 /*
  * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
  * @clk:	struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
  * @freqsel:	FREQSEL value to set
  *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock..  Returns -EINVAL upon error, or 0 upon success.
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
  */
-static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n,
-				      u16 freqsel)
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 {
 	struct dpll_data *dd = clk->dpll_data;
 	u8 dco, sd_div;
@@ -323,23 +320,45 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n,
 	/* Set DPLL multiplier, divider */
 	v = __raw_readl(dd->mult_div1_reg);
 	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= m << __ffs(dd->mult_mask);
-	v |= (n - 1) << __ffs(dd->div1_mask);
+	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
 
 	/* Configure dco and sd_div for dplls that have these fields */
 	if (dd->dco_mask) {
-		_lookup_dco(clk, &dco, m, n);
+		_lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
 		v &= ~(dd->dco_mask);
 		v |= dco << __ffs(dd->dco_mask);
 	}
 	if (dd->sddiv_mask) {
-		_lookup_sddiv(clk, &sd_div, m, n);
+		_lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+			      dd->last_rounded_n);
 		v &= ~(dd->sddiv_mask);
 		v |= sd_div << __ffs(dd->sddiv_mask);
 	}
 
 	__raw_writel(v, dd->mult_div1_reg);
 
+	/* Set 4X multiplier and low-power mode */
+	if (dd->m4xen_mask || dd->lpmode_mask) {
+		v = __raw_readl(dd->control_reg);
+
+		if (dd->m4xen_mask) {
+			if (dd->last_rounded_m4xen)
+				v |= dd->m4xen_mask;
+			else
+				v &= ~dd->m4xen_mask;
+		}
+
+		if (dd->lpmode_mask) {
+			if (dd->last_rounded_lpmode)
+				v |= dd->lpmode_mask;
+			else
+				v &= ~dd->lpmode_mask;
+		}
+
+		__raw_writel(v, dd->control_reg);
+	}
+
 	/* We let the clock framework set the other output dividers later */
 
 	/* REVISIT: Set ramp-up delay? */
@@ -492,8 +511,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 		pr_debug("%s: %s: set rate: locking rate to %lu.\n",
 			 __func__, __clk_get_name(hw->clk), rate);
 
-		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
-						dd->last_rounded_n, freqsel);
+		ret = omap3_noncore_dpll_program(clk, freqsel);
 		if (!ret)
 			new_parent = dd->clk_ref;
 	}

arch/arm/mach-omap2/dpll44xx.c

@@ -20,6 +20,15 @@
 #include "clock44xx.h"
 #include "cm-regbits-44xx.h"
 
+/*
+ * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
+ * can supported when using the DPLL low-power mode. Frequencies are
+ * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
+ * Status, and Low-Power Operation Mode".
+ */
+#define OMAP4_DPLL_LP_FINT_MAX	1000000
+#define OMAP4_DPLL_LP_FOUT_MAX	100000000
+
 /* Supported only on OMAP4 */
 int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
 {
@@ -81,6 +90,31 @@ const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
 	.deny_idle      = omap4_dpllmx_deny_gatectrl,
 };
 
+/**
+ * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
+ * @dd: pointer to the dpll data structure
+ *
+ * Calculates if low-power mode can be enabled based upon the last
+ * multiplier and divider values calculated. If low-power mode can be
+ * enabled, then the bit to enable low-power mode is stored in the
+ * last_rounded_lpmode variable. This implementation is based upon the
+ * criteria for enabling low-power mode as described in the OMAP4430/60
+ * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
+ * Operation Mode".
+ */
+static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
+{
+	long fint, fout;
+
+	fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+	fout = fint * dd->last_rounded_m;
+
+	if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
+		dd->last_rounded_lpmode = 1;
+	else
+		dd->last_rounded_lpmode = 0;
+}
+
 /**
  * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
  * @clk: struct clk * of the DPLL to compute the rate for
@@ -130,7 +164,6 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
 				    unsigned long *parent_rate)
 {
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 v;
 	struct dpll_data *dd;
 	long r;
 
@@ -139,18 +172,31 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
 
 	dd = clk->dpll_data;
 
-	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
-
-	if (v)
-		target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
+	dd->last_rounded_m4xen = 0;
 
+	/*
+	 * First try to compute the DPLL configuration for
+	 * target rate without using the 4X multiplier.
+	 */
 	r = omap2_dpll_round_rate(hw, target_rate, NULL);
+	if (r != ~0)
+		goto out;
+
+	/*
+	 * If we did not find a valid DPLL configuration, try again, but
+	 * this time see if using the 4X multiplier can help. Enabling the
+	 * 4X multiplier is equivalent to dividing the target rate by 4.
+	 */
+	r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
+				  NULL);
 	if (r == ~0)
 		return r;
 
-	if (v)
-		clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+	dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+	dd->last_rounded_m4xen = 1;
+
+out:
+	omap4_dpll_lpmode_recalc(dd);
 
-	return clk->dpll_data->last_rounded_rate;
+	return dd->last_rounded_rate;
 }

arch/arm/mach-omap2/mux.c

@@ -135,10 +135,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
 
 	old_mode = omap_mux_read(partition, gpio_mux->reg_offset);
 	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
-	if (partition->flags & OMAP_MUX_GPIO_IN_MODE3)
-		mux_mode |= OMAP_MUX_MODE3;
-	else
-		mux_mode |= OMAP_MUX_MODE4;
+	mux_mode |= partition->gpio;
 	pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__,
 		 gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
 	omap_mux_write(partition, mux_mode, gpio_mux->reg_offset);
@@ -800,7 +797,7 @@ int __init omap_mux_late_init(void)
 			struct omap_mux *m = &e->mux;
 			u16 mode = omap_mux_read(partition, m->reg_offset);
 
-			if (OMAP_MODE_GPIO(mode))
+			if (OMAP_MODE_GPIO(partition, mode))
 				continue;
 
 #ifndef CONFIG_DEBUG_FS
@@ -1065,7 +1062,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition,
 		}
 #else
 		/* Skip pins that are not muxed as GPIO by bootloader */
-		if (!OMAP_MODE_GPIO(omap_mux_read(partition,
+		if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition,
 				    superset->reg_offset))) {
 			superset++;
 			continue;
@@ -1132,6 +1129,7 @@ int __init omap_mux_init(const char *name, u32 flags,
 
 	partition->name = name;
 	partition->flags = flags;
+	partition->gpio = flags & OMAP_MUX_MODE7;
 	partition->size = mux_size;
 	partition->phys = mux_pbase;
 	partition->base = ioremap(mux_pbase, mux_size);

arch/arm/mach-omap2/mux.h

@@ -58,7 +58,8 @@
 #define OMAP_PIN_OFF_INPUT_PULLDOWN	(OMAP_OFF_EN | OMAP_OFF_PULL_EN)
 #define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
 
-#define OMAP_MODE_GPIO(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_GPIO(partition, x)	(((x) & OMAP_MUX_MODE7) == \
+					  partition->gpio)
 #define OMAP_MODE_UART(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
 
 /* Flags for omapX_mux_init */
@@ -79,13 +80,20 @@
 /*
  * omap_mux_init flags definition:
  *
+ * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
+ *      register which includes values from 0-7.
  * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
  * The default value is 16 bits.
- * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3.
- * The default is mode4.
  */
-#define OMAP_MUX_REG_8BIT		(1 << 0)
-#define OMAP_MUX_GPIO_IN_MODE3		(1 << 1)
+#define OMAP_MUX_GPIO_IN_MODE0		OMAP_MUX_MODE0
+#define OMAP_MUX_GPIO_IN_MODE1		OMAP_MUX_MODE1
+#define OMAP_MUX_GPIO_IN_MODE2		OMAP_MUX_MODE2
+#define OMAP_MUX_GPIO_IN_MODE3		OMAP_MUX_MODE3
+#define OMAP_MUX_GPIO_IN_MODE4		OMAP_MUX_MODE4
+#define OMAP_MUX_GPIO_IN_MODE5		OMAP_MUX_MODE5
+#define OMAP_MUX_GPIO_IN_MODE6		OMAP_MUX_MODE6
+#define OMAP_MUX_GPIO_IN_MODE7		OMAP_MUX_MODE7
+#define OMAP_MUX_REG_8BIT		(1 << 3)
 
 /**
  * struct omap_board_data - board specific device data
@@ -105,6 +113,7 @@ struct omap_board_data {
  * struct mux_partition - contain partition related information
  * @name: name of the current partition
  * @flags: flags specific to this partition
+ * @gpio: gpio mux mode
  * @phys: physical address
  * @size: partition size
  * @base: virtual address after ioremap
@@ -114,6 +123,7 @@ struct omap_board_data {
 struct omap_mux_partition {
 	const char		*name;
 	u32			flags;
+	u32			gpio;
 	u32			phys;
 	u32			size;
 	void __iomem		*base;

arch/arm/mach-omap2/mux34xx.c

@@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
 		return -EINVAL;
 	}
 
-	return omap_mux_init("core", 0,
+	return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4,
 			     OMAP3_CONTROL_PADCONF_MUX_PBASE,
 			     OMAP3_CONTROL_PADCONF_MUX_SIZE,
 			     omap3_muxmodes, package_subset, board_subset,

arch/arm/mach-omap2/serial.c

@@ -27,8 +27,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/console.h>
 #include <linux/omap-dma.h>
-
-#include <plat/omap-serial.h>
+#include <linux/platform_data/serial-omap.h>
 
 #include "common.h"
 #include "omap_hwmod.h"

arch/arm/mach-omap2/timer.c

@@ -190,7 +190,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
  * kernel registering these devices remove them dynamically from the device
  * tree on boot.
  */
-void __init omap_dmtimer_init(void)
+static void __init omap_dmtimer_init(void)
 {
 	struct device_node *np;
 
@@ -210,7 +210,7 @@ void __init omap_dmtimer_init(void)
  *
  * Get the timer errata flags that are specific to the OMAP device being used.
  */
-u32 __init omap_dm_timer_get_errata(void)
+static u32 __init omap_dm_timer_get_errata(void)
 {
 	if (cpu_is_omap24xx())
 		return 0;
@@ -392,7 +392,7 @@ static struct of_device_id omap_counter_match[] __initdata = {
 };
 
 /* Setup free-running counter for clocksource */
-static int __init omap2_sync32k_clocksource_init(void)
+static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 {
 	int ret;
 	struct device_node *np = NULL;

arch/arm/mach-omap2/usb-host.c

@@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	if (cpu_is_omap34xx()) {
 		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
+
+		if (omap_rev() <= OMAP3430_REV_ES2_1)
+			usbhs_data.single_ulpi_bypass = true;
+
 	} else if (cpu_is_omap44xx()) {
 		setup_4430ehci_io_mux(pdata->port_mode);
 		setup_4430ohci_io_mux(pdata->port_mode);

arch/arm/mach-tegra/common.c

@@ -104,7 +104,7 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
 static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "clk_m",	NULL,		0,		true },
-	{ "pll_p",	"clk_m",	408000000,	true },
+	{ "pll_p",	"pll_ref",	408000000,	true },
 	{ "pll_p_out1",	"pll_p",	9600000,	true },
 	{ "pll_p_out4",	"pll_p",	102000000,	true },
 	{ "sclk",	"pll_p_out4",	102000000,	true },

arch/arm/mach-tegra/tegra30_clocks.c

@@ -2045,9 +2045,7 @@ struct clk_ops tegra30_periph_clk_ops = {
 static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index)
 {
 	struct clk *d = clk_get_sys(NULL, "pll_d");
-	/* The DSIB parent selection bit is in PLLD base
-	   register - can not do direct r-m-w, must be
-	   protected by PLLD lock */
+	/* The DSIB parent selection bit is in PLLD base register */
 	tegra_clk_cfg_ex(
 		d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index);
 

arch/arm/mach-u300/core.c

@@ -27,7 +27,6 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/fsmc.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/clk-u300.h>
@@ -1553,39 +1552,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = {
 				    pin_highz_conf),
 };
 
-struct u300_mux_hog {
-	struct device *dev;
-	struct pinctrl *p;
-};
-
-static struct u300_mux_hog u300_mux_hogs[] = {
-	{
-		.dev = &uart0_device.dev,
-	},
-	{
-		.dev = &mmcsd_device.dev,
-	},
-};
-
-static int __init u300_pinctrl_fetch(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
-		struct pinctrl *p;
-
-		p = pinctrl_get_select_default(u300_mux_hogs[i].dev);
-		if (IS_ERR(p)) {
-			pr_err("u300: could not get pinmux hog for dev %s\n",
-			       dev_name(u300_mux_hogs[i].dev));
-			continue;
-		}
-		u300_mux_hogs[i].p = p;
-	}
-	return 0;
-}
-subsys_initcall(u300_pinctrl_fetch);
-
 /*
  * Notice that AMBA devices are initialized before platform devices.
  *

arch/arm/mach-ux500/devices-db8500.h

@@ -8,6 +8,7 @@
 #ifndef __DEVICES_DB8500_H
 #define __DEVICES_DB8500_H
 
+#include <linux/platform_data/usb-musb-ux500.h>
 #include <mach/irqs.h>
 #include "devices-common.h"
 

arch/arm/plat-omap/Makefile

@@ -11,7 +11,6 @@ obj-  :=
 # omap_device support (OMAP2+ only at the moment)
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
-obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
 i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
 obj-y += $(i2c-omap-m) $(i2c-omap-y)

arch/arm/plat-omap/debug-devices.c

-/*
- * linux/arch/arm/plat-omap/debug-devices.c
- *
- * Copyright (C) 2005 Nokia Corporation
- * Modified from mach-omap2/board-h4.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include <plat/debug-devices.h>
-
-/* Many OMAP development platforms reuse the same "debug board"; these
- * platforms include H2, H3, H4, and Perseus2.
- */
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource led_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device led_device = {
-	.name		= "omap_dbg_led",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(led_resources),
-	.resource	= led_resources,
-};
-
-static struct platform_device *debug_devices[] __initdata = {
-	&smc91x_device,
-	&led_device,
-	/* ps2 kbd + mouse ports */
-	/* 4 extra uarts */
-	/* 6 input dip switches */
-	/* 8 output pins */
-};
-
-int __init debug_card_init(u32 addr, unsigned gpio)
-{
-	int	status;
-
-	smc91x_resources[0].start = addr + 0x300;
-	smc91x_resources[0].end   = addr + 0x30f;
-
-	smc91x_resources[1].start = gpio_to_irq(gpio);
-	smc91x_resources[1].end   = gpio_to_irq(gpio);
-
-	status = gpio_request(gpio, "SMC91x irq");
-	if (status < 0) {
-		printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
-		return status;
-	}
-	gpio_direction_input(gpio);
-
-	led_resources[0].start = addr;
-	led_resources[0].end   = addr + SZ_4K - 1;
-
-	return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
-}

arch/arm/plat-omap/include/plat/debug-devices.h

-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);

drivers/amba/tegra-ahb.c

@@ -157,6 +157,7 @@ int tegra_ahb_enable_smmu(struct device_node *dn)
 EXPORT_SYMBOL(tegra_ahb_enable_smmu);
 #endif
 
+#ifdef CONFIG_PM_SLEEP
 static int tegra_ahb_suspend(struct device *dev)
 {
 	int i;
@@ -176,6 +177,7 @@ static int tegra_ahb_resume(struct device *dev)
 		gizmo_writel(ahb, ahb->ctx[i], tegra_ahb_gizmo[i]);
 	return 0;
 }
+#endif
 
 static UNIVERSAL_DEV_PM_OPS(tegra_ahb_pm,
 			    tegra_ahb_suspend,

drivers/mfd/omap-usb-host.c

@@ -25,7 +25,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
-#include <plat/cpu.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb-omap.h>
 #include <linux/pm_runtime.h>
@@ -384,7 +383,7 @@ static void omap_usbhs_init(struct device *dev)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 
 		/* Bypass the TLL module for PHY mode operation */
-		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+		if (pdata->single_ulpi_bypass) {
 			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
 			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
 				is_ehci_phy_mode(pdata->port_mode[1]) ||

drivers/tty/serial/omap-serial.c

@@ -41,8 +41,7 @@
 #include <linux/of.h>
 #include <linux/gpio.h>
 #include <linux/pinctrl/consumer.h>
-
-#include <plat/omap-serial.h>
+#include <linux/platform_data/serial-omap.h>
 
 #define OMAP_MAX_HSUART_PORTS	6
 

include/linux/platform_data/usb-omap.h

@@ -59,6 +59,9 @@ struct usbhs_omap_platform_data {
 
 	struct ehci_hcd_omap_platform_data	*ehci_data;
 	struct ohci_hcd_omap_platform_data	*ohci_data;
+
+	/* OMAP3 <= ES2.1 have a single ulpi bypass control bit */
+	unsigned				single_ulpi_bypass:1;
 };
 
 /*-------------------------------------------------------------------------*/

include/video/omap-panel-tfp410.h

@@ -28,7 +28,7 @@ struct omap_dss_device;
  * @power_down_gpio: gpio number for PD pin (or -1 if not available)
  */
 struct tfp410_platform_data {
-	u16 i2c_bus_num;
+	int i2c_bus_num;
 	int power_down_gpio;
 };