Commit 2032e2c2 authored by Tilman Schmidt's avatar Tilman Schmidt Committed by David S. Miller

usb_gigaset: code cleanup

Reorganize the code of the Gigaset M10x driver to make it more
readable, less redundant, better aligned to the style of other
parts of the driver, and cause fewer checkpatch.pl complaints.

Impact: code reorganization, no functional change
Signed-off-by: default avatarTilman Schmidt <tilman@imap.cc>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 4dd8230a
This diff is collapsed.
......@@ -400,9 +400,9 @@ static void gigaset_freebcs(struct bc_state *bcs)
gig_dbg(DEBUG_INIT, "clearing bcs[%d]->at_state", bcs->channel);
clear_at_state(&bcs->at_state);
gig_dbg(DEBUG_INIT, "freeing bcs[%d]->skb", bcs->channel);
if (bcs->skb)
dev_kfree_skb(bcs->skb);
bcs->skb = NULL;
for (i = 0; i < AT_NUM; ++i) {
kfree(bcs->commands[i]);
bcs->commands[i] = NULL;
......@@ -560,16 +560,13 @@ void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
}
static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct bc_state *bcs,
struct cardstate *cs, int inputstate)
static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct cardstate *cs)
/* inbuf->read must be allocated before! */
{
inbuf->head = 0;
inbuf->tail = 0;
inbuf->cs = cs;
inbuf->bcs = bcs; /*base driver: NULL*/
inbuf->rcvbuf = NULL;
inbuf->inputstate = inputstate;
inbuf->inputstate = INS_command;
}
/**
......@@ -644,16 +641,13 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,
bcs->fcs = PPP_INITFCS;
bcs->inputstate = 0;
if (cs->ignoreframes) {
bcs->inputstate |= INS_skip_frame;
bcs->skb = NULL;
} else {
bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
if (bcs->skb != NULL)
skb_reserve(bcs->skb, cs->hw_hdr_len);
else {
else
pr_err("out of memory\n");
bcs->inputstate |= INS_skip_frame;
}
}
bcs->channel = channel;
......@@ -674,8 +668,8 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,
gig_dbg(DEBUG_INIT, " failed");
gig_dbg(DEBUG_INIT, " freeing bcs[%d]->skb", channel);
if (bcs->skb)
dev_kfree_skb(bcs->skb);
bcs->skb = NULL;
return NULL;
}
......@@ -764,10 +758,7 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
cs->cbytes = 0;
gig_dbg(DEBUG_INIT, "setting up inbuf");
if (onechannel) { //FIXME distinction necessary?
gigaset_inbuf_init(cs->inbuf, cs->bcs, cs, INS_command);
} else
gigaset_inbuf_init(cs->inbuf, NULL, cs, INS_command);
gigaset_inbuf_init(cs->inbuf, cs);
cs->connected = 0;
cs->isdn_up = 0;
......@@ -854,9 +845,10 @@ void gigaset_bcs_reinit(struct bc_state *bcs)
bcs->chstate = 0;
bcs->ignore = cs->ignoreframes;
if (bcs->ignore)
bcs->inputstate |= INS_skip_frame;
if (bcs->ignore) {
dev_kfree_skb(bcs->skb);
bcs->skb = NULL;
}
cs->ops->reinitbcshw(bcs);
}
......@@ -877,8 +869,6 @@ static void cleanup_cs(struct cardstate *cs)
free_strings(&cs->at_state);
gigaset_at_init(&cs->at_state, NULL, cs, 0);
kfree(cs->inbuf->rcvbuf);
cs->inbuf->rcvbuf = NULL;
cs->inbuf->inputstate = INS_command;
cs->inbuf->head = 0;
cs->inbuf->tail = 0;
......
......@@ -223,12 +223,11 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
#define EV_BC_CLOSED -118
/* input state */
#define INS_command 0x0001
#define INS_DLE_char 0x0002
#define INS_command 0x0001 /* receiving messages (not payload data) */
#define INS_DLE_char 0x0002 /* DLE flag received (in DLE mode) */
#define INS_byte_stuff 0x0004
#define INS_have_data 0x0008
#define INS_skip_frame 0x0010
#define INS_DLE_command 0x0020
#define INS_DLE_command 0x0020 /* DLE message start (<DLE> X) received */
#define INS_flag_hunt 0x0040
/* channel state */
......@@ -290,8 +289,6 @@ extern struct reply_t gigaset_tab_cid[];
extern struct reply_t gigaset_tab_nocid[];
struct inbuf_t {
unsigned char *rcvbuf; /* usb-gigaset receive buffer */
struct bc_state *bcs;
struct cardstate *cs;
int inputstate;
int head, tail;
......@@ -483,8 +480,8 @@ struct cardstate {
struct timer_list timer;
int retry_count;
int dle; /* !=0 if modem commands/responses are
dle encoded */
int dle; /* !=0 if DLE mode is active
(ZDLE=1 received -- M10x only) */
int cur_at_seq; /* sequence of AT commands being
processed */
int curchannel; /* channel those commands are meant
......
......@@ -43,14 +43,14 @@ MODULE_PARM_DESC(cidmode, "Call-ID mode");
#define GIGASET_MODULENAME "usb_gigaset"
#define GIGASET_DEVNAME "ttyGU"
#define IF_WRITEBUF 2000 //FIXME // WAKEUP_CHARS: 256
#define IF_WRITEBUF 2000 /* arbitrary limit */
/* Values for the Gigaset M105 Data */
#define USB_M105_VENDOR_ID 0x0681
#define USB_M105_PRODUCT_ID 0x0009
/* table of devices that work with this driver */
static const struct usb_device_id gigaset_table [] = {
static const struct usb_device_id gigaset_table[] = {
{ USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
{ } /* Terminating entry */
};
......@@ -97,8 +97,8 @@ MODULE_DEVICE_TABLE(usb, gigaset_table);
* 41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
* Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
* xx is usually 0x00 but was 0x7e before starting data transfer
* in unimodem mode. So, this might be an array of characters that need
* special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
* in unimodem mode. So, this might be an array of characters that
* need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
*
* Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
* flags per packet.
......@@ -114,7 +114,7 @@ static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
static int gigaset_resume(struct usb_interface *intf);
static int gigaset_pre_reset(struct usb_interface *intf);
static struct gigaset_driver *driver = NULL;
static struct gigaset_driver *driver;
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver gigaset_usb_driver = {
......@@ -141,6 +141,7 @@ struct usb_cardstate {
struct urb *bulk_out_urb;
/* Input buffer */
unsigned char *rcvbuf;
int rcvbuf_size;
struct urb *read_urb;
__u8 int_in_endpointAddr;
......@@ -164,13 +165,11 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
val = tiocm_to_gigaset(new_state);
gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
// don't use this in an interrupt/BH
r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
(val & 0xff) | ((mask & 0xff) << 8), 0,
NULL, 0, 2000 /* timeout? */);
if (r < 0)
return r;
//..
return 0;
}
......@@ -220,7 +219,6 @@ static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
cflag &= CBAUD;
switch (cflag) {
//FIXME more values?
case B300: rate = 300; break;
case B600: rate = 600; break;
case B1200: rate = 1200; break;
......@@ -273,7 +271,7 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
/* set the number of stop bits */
if (cflag & CSTOPB) {
if ((cflag & CSIZE) == CS5)
val |= 1; /* 1.5 stop bits */ //FIXME is this okay?
val |= 1; /* 1.5 stop bits */
else
val |= 2; /* 2 stop bits */
}
......@@ -282,7 +280,7 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
}
/*================================================================================================================*/
/*============================================================================*/
static int gigaset_init_bchannel(struct bc_state *bcs)
{
/* nothing to do for M10x */
......@@ -344,7 +342,6 @@ static void gigaset_modem_fill(unsigned long data)
if (write_modem(cs) < 0) {
gig_dbg(DEBUG_OUTPUT,
"modem_fill: write_modem failed");
// FIXME should we tell the LL?
again = 1; /* no callback will be called! */
}
}
......@@ -356,8 +353,8 @@ static void gigaset_modem_fill(unsigned long data)
*/
static void gigaset_read_int_callback(struct urb *urb)
{
struct inbuf_t *inbuf = urb->context;
struct cardstate *cs = inbuf->cs;
struct cardstate *cs = urb->context;
struct inbuf_t *inbuf = cs->inbuf;
int status = urb->status;
int r;
unsigned numbytes;
......@@ -368,7 +365,7 @@ static void gigaset_read_int_callback(struct urb *urb)
numbytes = urb->actual_length;
if (numbytes) {
src = inbuf->rcvbuf;
src = cs->hw.usb->rcvbuf;
if (unlikely(*src))
dev_warn(cs->dev,
"%s: There was no leading 0, but 0x%02x!\n",
......@@ -440,7 +437,7 @@ static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb)
struct cmdbuf_t *tcb;
unsigned long flags;
int count;
int status = -ENOENT; // FIXME
int status = -ENOENT;
struct usb_cardstate *ucs = cs->hw.usb;
do {
......@@ -480,7 +477,9 @@ static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb)
ucs->busy = 1;
spin_lock_irqsave(&cs->lock, flags);
status = cs->connected ? usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) : -ENODEV;
status = cs->connected ?
usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
-ENODEV;
spin_unlock_irqrestore(&cs->lock, flags);
if (status) {
......@@ -510,8 +509,8 @@ static int gigaset_write_cmd(struct cardstate *cs, const unsigned char *buf,
if (len <= 0)
return 0;
if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC);
if (!cb) {
dev_err(cs->dev, "%s: out of memory\n", __func__);
return -ENOMEM;
}
......@@ -637,9 +636,7 @@ static int write_modem(struct cardstate *cs)
return -EINVAL;
}
/* Copy data to bulk out buffer and // FIXME copying not necessary
* transmit data
*/
/* Copy data to bulk out buffer and transmit data */
count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count);
skb_pull(bcs->tx_skb, count);
......@@ -650,7 +647,8 @@ static int write_modem(struct cardstate *cs)
if (cs->connected) {
usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
usb_sndbulkpipe(ucs->udev,
ucs->bulk_out_endpointAddr & 0x0f),
ucs->bulk_out_endpointAddr &
0x0f),
ucs->bulk_out_buffer, count,
gigaset_write_bulk_callback, cs);
ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC);
......@@ -666,7 +664,7 @@ static int write_modem(struct cardstate *cs)
if (!bcs->tx_skb->len) {
/* skb sent completely */
gigaset_skb_sent(bcs, bcs->tx_skb); //FIXME also, when ret<0?
gigaset_skb_sent(bcs, bcs->tx_skb);
gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
(unsigned long) bcs->tx_skb);
......@@ -763,8 +761,8 @@ static int gigaset_probe(struct usb_interface *interface,
buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
ucs->rcvbuf_size = buffer_size;
ucs->int_in_endpointAddr = endpoint->bEndpointAddress;
cs->inbuf[0].rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
if (!cs->inbuf[0].rcvbuf) {
ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
if (!ucs->rcvbuf) {
dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
retval = -ENOMEM;
goto error;
......@@ -773,9 +771,9 @@ static int gigaset_probe(struct usb_interface *interface,
usb_fill_int_urb(ucs->read_urb, udev,
usb_rcvintpipe(udev,
endpoint->bEndpointAddress & 0x0f),
cs->inbuf[0].rcvbuf, buffer_size,
ucs->rcvbuf, buffer_size,
gigaset_read_int_callback,
cs->inbuf + 0, endpoint->bInterval);
cs, endpoint->bInterval);
retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL);
if (retval) {
......@@ -789,7 +787,7 @@ static int gigaset_probe(struct usb_interface *interface,
if (!gigaset_start(cs)) {
tasklet_kill(&cs->write_tasklet);
retval = -ENODEV; //FIXME
retval = -ENODEV;
goto error;
}
return 0;
......@@ -798,11 +796,11 @@ static int gigaset_probe(struct usb_interface *interface,
usb_kill_urb(ucs->read_urb);
kfree(ucs->bulk_out_buffer);
usb_free_urb(ucs->bulk_out_urb);
kfree(cs->inbuf[0].rcvbuf);
kfree(ucs->rcvbuf);
usb_free_urb(ucs->read_urb);
usb_set_intfdata(interface, NULL);
ucs->read_urb = ucs->bulk_out_urb = NULL;
cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
usb_put_dev(ucs->udev);
ucs->udev = NULL;
ucs->interface = NULL;
......@@ -831,10 +829,10 @@ static void gigaset_disconnect(struct usb_interface *interface)
kfree(ucs->bulk_out_buffer);
usb_free_urb(ucs->bulk_out_urb);
kfree(cs->inbuf[0].rcvbuf);
kfree(ucs->rcvbuf);
usb_free_urb(ucs->read_urb);
ucs->read_urb = ucs->bulk_out_urb = NULL;
cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
usb_put_dev(ucs->udev);
ucs->interface = NULL;
......@@ -916,9 +914,10 @@ static int __init usb_gigaset_init(void)
int result;
/* allocate memory for our driver state and intialize it */
if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
GIGASET_MODULENAME, GIGASET_DEVNAME,
&ops, THIS_MODULE)) == NULL)
&ops, THIS_MODULE);
if (driver == NULL)
goto error;
/* register this driver with the USB subsystem */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment