scsi: lpfc: Validate adapter support for SRIU option

When using the special option to suppress the response iu, ensure the
adapter fully supports the feature by checking feature flags from the
adapter and validating the support when formatting the WQE.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc_hw4.h

@@ -3293,6 +3293,9 @@ struct lpfc_sli4_parameters {
 #define cfg_eqdr_SHIFT				8
 #define cfg_eqdr_MASK				0x00000001
 #define cfg_eqdr_WORD				word19
+#define cfg_nosr_SHIFT				9
+#define cfg_nosr_MASK				0x00000001
+#define cfg_nosr_WORD				word19
 #define LPFC_NODELAY_MAX_IO		32
 };
 

drivers/scsi/lpfc/lpfc_init.c

@@ -10473,8 +10473,19 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 		phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
 	}
 
-	if (bf_get(cfg_xib, mbx_sli4_parameters) && phba->cfg_suppress_rsp)
+	/*
+	 * To support Suppress Response feature we must satisfy 3 conditions.
+	 * lpfc_suppress_rsp module parameter must be set (default).
+	 * In SLI4-Parameters Descriptor:
+	 * Extended Inline Buffers (XIB) must be supported.
+	 * Suppress Response IU Not Supported (SRIUNS) must NOT be supported
+	 * (double negative).
+	 */
+	if (phba->cfg_suppress_rsp && bf_get(cfg_xib, mbx_sli4_parameters) &&
+	    !(bf_get(cfg_nosr, mbx_sli4_parameters)))
 		phba->sli.sli_flag |= LPFC_SLI_SUPPRESS_RSP;
+	else
+		phba->cfg_suppress_rsp = 0;
 
 	if (bf_get(cfg_eqdr, mbx_sli4_parameters))
 		phba->sli.sli_flag |= LPFC_SLI_USE_EQDR;

drivers/scsi/lpfc/lpfc_nvmet.c

@@ -2290,9 +2290,10 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
 		if (rsp->op == NVMET_FCOP_READDATA_RSP) {
 			atomic_inc(&tgtp->xmt_fcp_read_rsp);
 			bf_set(wqe_ar, &wqe->fcp_tsend.wqe_com, 1);
-			if ((ndlp->nlp_flag & NLP_SUPPRESS_RSP) &&
-			    (rsp->rsplen == 12)) {
-				bf_set(wqe_sup, &wqe->fcp_tsend.wqe_com, 1);
+			if (rsp->rsplen == LPFC_NVMET_SUCCESS_LEN) {
+				if (ndlp->nlp_flag & NLP_SUPPRESS_RSP)
+					bf_set(wqe_sup,
+					       &wqe->fcp_tsend.wqe_com, 1);
 				bf_set(wqe_wqes, &wqe->fcp_tsend.wqe_com, 0);
 				bf_set(wqe_irsp, &wqe->fcp_tsend.wqe_com, 0);
 				bf_set(wqe_irsplen, &wqe->fcp_tsend.wqe_com, 0);