Commit 21a75d77 authored by Michael Buesch's avatar Michael Buesch Committed by John W. Linville

b43: Fix some TX/RX locking issues

This fixes some TX/RX related locking issues.
With this patch applied, some of the PHY transmission errors are fixed.
Signed-off-by: default avatarMichael Buesch <mb@bu3sch.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent c2a3b233
......@@ -691,6 +691,10 @@ struct b43_wl {
struct mutex mutex;
spinlock_t irq_lock;
/* R/W lock for data transmission.
* Transmissions on 2+ queues can run concurrently, but somebody else
* might sync with TX by write_lock_irqsave()'ing. */
rwlock_t tx_lock;
/* Lock for LEDs access. */
spinlock_t leds_lock;
/* Lock for SHM access. */
......
......@@ -729,6 +729,7 @@ static void b43_synchronize_irq(struct b43_wldev *dev)
*/
void b43_dummy_transmission(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
struct b43_phy *phy = &dev->phy;
unsigned int i, max_loop;
u16 value;
......@@ -755,6 +756,9 @@ void b43_dummy_transmission(struct b43_wldev *dev)
return;
}
spin_lock_irq(&wl->irq_lock);
write_lock(&wl->tx_lock);
for (i = 0; i < 5; i++)
b43_ram_write(dev, i * 4, buffer[i]);
......@@ -795,6 +799,9 @@ void b43_dummy_transmission(struct b43_wldev *dev)
}
if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
b43_radio_write16(dev, 0x0051, 0x0037);
write_unlock(&wl->tx_lock);
spin_unlock_irq(&wl->irq_lock);
}
static void key_write(struct b43_wldev *dev,
......@@ -2840,24 +2847,31 @@ static int b43_op_tx(struct ieee80211_hw *hw,
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
int err = -ENODEV;
unsigned long flags;
int err;
if (unlikely(skb->len < 2 + 2 + 6)) {
/* Too short, this can't be a valid frame. */
return -EINVAL;
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
B43_WARN_ON(skb_shinfo(skb)->nr_frags);
if (unlikely(!dev))
goto out;
if (unlikely(b43_status(dev) < B43_STAT_STARTED))
goto out;
/* TX is done without a global lock. */
return NETDEV_TX_BUSY;
/* Transmissions on seperate queues can run concurrently. */
read_lock_irqsave(&wl->tx_lock, flags);
err = -ENODEV;
if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
if (b43_using_pio_transfers(dev))
err = b43_pio_tx(dev, skb, ctl);
else
err = b43_dma_tx(dev, skb, ctl);
out:
}
read_unlock_irqrestore(&wl->tx_lock, flags);
if (unlikely(err))
return NETDEV_TX_BUSY;
return NETDEV_TX_OK;
......@@ -3476,7 +3490,9 @@ static void b43_wireless_core_stop(struct b43_wldev *dev)
spin_unlock_irqrestore(&wl->irq_lock, flags);
b43_synchronize_irq(dev);
write_lock_irqsave(&wl->tx_lock, flags);
b43_set_status(dev, B43_STAT_INITIALIZED);
write_unlock_irqrestore(&wl->tx_lock, flags);
b43_pio_stop(dev);
mutex_unlock(&wl->mutex);
......@@ -3485,8 +3501,6 @@ static void b43_wireless_core_stop(struct b43_wldev *dev)
cancel_delayed_work_sync(&dev->periodic_work);
mutex_lock(&wl->mutex);
ieee80211_stop_queues(wl->hw); //FIXME this could cause a deadlock, as mac80211 seems buggy.
b43_mac_suspend(dev);
free_irq(dev->dev->irq, dev);
b43dbg(wl, "Wireless interface stopped\n");
......@@ -4498,6 +4512,7 @@ static int b43_wireless_init(struct ssb_device *dev)
memset(wl, 0, sizeof(*wl));
wl->hw = hw;
spin_lock_init(&wl->irq_lock);
rwlock_init(&wl->tx_lock);
spin_lock_init(&wl->leds_lock);
spin_lock_init(&wl->shm_lock);
mutex_init(&wl->mutex);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment