Skip to content

L
linux
Commit 225b563b authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge nuts.ninka.net:/home/davem/src/BK/zaitcev-2.5 

into nuts.ninka.net:/home/davem/src/BK/sparc-2.5
parents cc8a6820 23340580
Hide whitespace changes
Inline Side-by-side
Showing with 333 additions and 462 deletions
arch/sparc/config.in
View file @ 225b563b
......@@ -59,6 +59,9 @@ endmenu
mainmenu_option next_comment
comment 'Console drivers'
bool 'PROM console' CONFIG_PROM_CONSOLE
if [ "$CONFIG_PROM_CONSOLE" != "y" ]; then
define_bool CONFIG_DUMMY_CONSOLE y
fi
source drivers/video/Config.in
endmenu
......@@ -214,6 +217,8 @@ if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
fi
endmenu
source drivers/input/Config.in
source fs/Config.in
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
......
arch/sparc/defconfig
View file @ 225b563b
......@@ -3,6 +3,12 @@
#
CONFIG_UID16=y
CONFIG_HIGHMEM=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
......@@ -12,11 +18,6 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
......@@ -29,6 +30,7 @@ CONFIG_KMOD=y
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SMP is not set
CONFIG_SPARC32=y
# CONFIG_ISA is not set
......@@ -37,20 +39,15 @@ CONFIG_SPARC32=y
# CONFIG_PCMCIA is not set
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_BUSMOUSE=y
CONFIG_SUN_MOUSE=y
CONFIG_SERIAL=y
CONFIG_SUN_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SUN_KEYBOARD=y
CONFIG_SUN_CONSOLE=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_SUN_PM=y
# CONFIG_SUN4 is not set
# CONFIG_PCI is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=y
......@@ -67,35 +64,43 @@ CONFIG_SUNOS_EMUL=y
#
# Console drivers
#
CONFIG_PROM_CONSOLE=y
# CONFIG_PROM_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_SBUS=y
CONFIG_FB_CGSIX=y
CONFIG_FB_BWTWO=y
CONFIG_FB_CGTHREE=y
CONFIG_FB_TCX=y
CONFIG_FB_CGFOURTEEN=y
# CONFIG_FB_P9100 is not set
CONFIG_FB_LEO=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_MFB=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_FONTWIDTH8_ONLY=y
CONFIG_FONT_SUN8x16=y
# CONFIG_FBCON_FONTS is not set
# CONFIG_FB is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNSU=y
# CONFIG_SERIAL_SUNSAB is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#
# Misc Linux/SPARC drivers
#
......@@ -103,9 +108,11 @@ CONFIG_SUN_OPENPROMIO=m
CONFIG_SUN_MOSTEK_RTC=y
# CONFIG_SUN_BPP is not set
# CONFIG_SUN_VIDEOPIX is not set
CONFIG_SUN_AURORA=m
# CONFIG_SUN_AURORA is not set
# CONFIG_TADPOLE_TS102_UCTRL is not set
# CONFIG_SUN_JSFLASH is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_RTC is not set
#
# Linux/SPARC audio subsystem (EXPERIMENTAL)
......@@ -119,9 +126,9 @@ CONFIG_SUN_AURORA=m
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_NBD is not set
#
# Multi-device support (RAID and LVM)
......@@ -138,6 +145,31 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_HD is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Fibre Channel support
#
# CONFIG_FC4 is not set
# CONFIG_FC4_SOC is not set
# CONFIG_FC4_SOCAL is not set
# CONFIG_SCSI_PLUTO is not set
# CONFIG_SCSI_FCAL is not set
#
# Networking options
#
......@@ -150,30 +182,35 @@ CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_IPV6=m
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
#
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DECNET=m
CONFIG_DECNET_SIOCGIFCONF=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_IPV6_SCTP__=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_ADLER32 is not set
# CONFIG_SCTP_DBG_MSG is not set
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
......@@ -184,83 +221,22 @@ CONFIG_DECNET_SIOCGIFCONF=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CDrom)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
CONFIG_SCSI_SUNESP=y
CONFIG_SCSI_QLOGICPTI=m
#
# Fibre Channel support
#
CONFIG_FC4=m
#
# FC4 drivers
#
CONFIG_FC4_SOC=m
CONFIG_FC4_SOCAL=m
#
# FC4 targets
#
CONFIG_SCSI_PLUTO=m
CONFIG_SCSI_FCAL=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_TUN is not set
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_SUNLANCE=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNBMAC=m
# CONFIG_BONDING is not set
CONFIG_TUN=m
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SUNLANCE=m
CONFIG_HAPPYMEAL=y
# CONFIG_SUNBMAC is not set
CONFIG_SUNQE=m
CONFIG_MYRI_SBUS=m
# CONFIG_MYRI_SBUS is not set
CONFIG_VORTEX=m
#
# Unix98 PTY support
......@@ -272,6 +248,8 @@ CONFIG_UNIX98_PTY_COUNT=256
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_REISERFS_FS is not set
......@@ -279,17 +257,17 @@ CONFIG_AUTOFS4_FS=m
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=m
CONFIG_JBD=m
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_EFS_FS=m
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
......@@ -298,12 +276,15 @@ CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_MINIX_FS=m
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
CONFIG_HPFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
......@@ -313,26 +294,27 @@ CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_INTERMEZZO_FS=m
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
......@@ -343,7 +325,6 @@ CONFIG_SMB_FS=m
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set
#
# Partition Types
......@@ -351,49 +332,8 @@ CONFIG_SMB_FS=m
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Bluetooth support
......@@ -408,9 +348,18 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_SLAB=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
#
# Security options
#
CONFIG_SECURITY_CAPABILITIES=y
#
# Library routines
#
CONFIG_CRC32=y
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
arch/sparc/kernel/Makefile
View file @ 225b563b
......@@ -13,7 +13,7 @@ export-objs := sparc_ksyms.o
IRQ_OBJS := irq.o sun4m_irq.o sun4c_irq.o sun4d_irq.o
obj-y := entry.o wof.o wuf.o etrap.o rtrap.o traps.o ${IRQ_OBJS} \
process.o signal.o ioport.o setup.o idprom.o \
sys_sparc.o sunos_asm.o sparc-stub.o systbls.o \
sys_sparc.o sunos_asm.o systbls.o \
time.o windows.o cpu.o devices.o sclow.o \
tadpole.o tick14.o ptrace.o sys_solaris.o \
unaligned.o muldiv.o pcic.o semaphore.o sparc_ksyms.o
......
arch/sparc/kernel/ebus.c
View file @ 225b563b
......@@ -24,8 +24,6 @@
struct linux_ebus *ebus_chain = 0;
extern void rs_init(void);
/* We are together with pcic.c under CONFIG_PCI. */
extern unsigned int pcic_pin_to_irq(unsigned int, char *name);
......@@ -361,6 +359,4 @@ void __init ebus_init(void)
ebus->next = 0;
++num_ebus;
}
rs_init();
}
arch/sparc/kernel/entry.S
View file @ 225b563b
......@@ -53,6 +53,7 @@ in_trap_handler:
.text
.align 4
#if 0 /* kgdb is dropped from 2.5.33 */
! This function is called when any SPARC trap (except window overflow or
! underflow) occurs. It makes sure that the invalid register window is still
! available before jumping into C code. It will also restore the world if you
......@@ -119,7 +120,7 @@ C_LABEL(trap_low):
STORE_PT_PRIV(sp, l0, l1, l2)
RESTORE_ALL
#endif
#ifdef CONFIG_BLK_DEV_FD
.text
......
arch/sparc/kernel/pcic.c
View file @ 225b563b
/* $Id: pcic.c,v 1.23 2002/01/23 14:33:55 davem Exp $
* pcic.c: Sparc/PCI controller support
/*
* pcic.c: MicroSPARC-IIep PCI controller support
*
* Copyright (C) 1998 V. Roganov and G. Raiko
*
......@@ -193,48 +193,26 @@ static void pci_do_settimeofday(struct timeval *tv);
#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *value)
static int pcic_read_config_dword(unsigned int busno, unsigned int devfn,
int where, u32 *value)
{
unsigned int v;
unsigned char busnum = bus->number;
struct linux_pcic *pcic;
unsigned long flags;
/* unsigned char where; */
switch (size) {
case 1:
pcic_read_config(bus, devfn, where&~3, 4, &v);
*value = 0xff & (v >> (8*(where & 3)));
return PCIBIOS_SUCCESSFUL;
break;
case 2:
if (where&1) return PCIBIOS_BAD_REGISTER_NUMBER;
pcic_read_config(bus, devfn, where&~3, 4, &v);
*value = 0xffff & (v >> (8*(where & 3)));
return PCIBIOS_SUCCESSFUL;
break;
}
/* size == 4, i.e. dword */
if (where&3) return PCIBIOS_BAD_REGISTER_NUMBER;
if (busnum != 0) return PCIBIOS_DEVICE_NOT_FOUND;
pcic = &pcic0;
save_and_cli(flags);
local_irq_save(flags);
#if 0 /* does not fail here */
pcic_speculative = 1;
pcic_trapped = 0;
#endif
writel(CONFIG_CMD(busnum,devfn,where), pcic->pcic_config_space_addr);
writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
#if 0 /* does not fail here */
nop();
if (pcic_trapped) {
restore_flags(flags);
local_irq_restore(flags);
*value = ~0;
return PCIBIOS_SUCCESSFUL;
return 0;
}
#endif
pcic_speculative = 2;
......@@ -243,50 +221,77 @@ static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
nop();
if (pcic_trapped) {
pcic_speculative = 0;
restore_flags(flags);
local_irq_restore(flags);
*value = ~0;
return PCIBIOS_SUCCESSFUL;
return 0;
}
pcic_speculative = 0;
restore_flags(flags);
return PCIBIOS_SUCCESSFUL;
local_irq_restore(flags);
return 0;
}
static int pcic_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 value)
static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
unsigned int v;
unsigned char busnum = bus->number;
struct linux_pcic *pcic;
unsigned long flags;
if (bus->number != 0) return -EINVAL;
switch (size) {
case 1:
pcic_read_config(bus, devfn, where&~3, 4, &v);
v = (v & ~(0xff << (8*(where&3)))) |
((0xff&(unsigned)value) << (8*(where&3)));
return pcic_write_config(bus, devfn, where&~3, 4, v);
break;
pcic_read_config_dword(bus->number, devfn, where&~3, &v);
*val = 0xff & (v >> (8*(where & 3)));
return 0;
case 2:
if (where&1) return PCIBIOS_BAD_REGISTER_NUMBER;
pcic_read_config(bus, devfn, where&~3, 4, &v);
v = (v & ~(0xffff << (8*(where&3)))) |
((0xffff&(unsigned)value) << (8*(where&3)));
return pcic_write_config(bus, devfn, where&~3, 4, v);
break;
if (where&1) return -EINVAL;
pcic_read_config_dword(bus->number, devfn, where&~3, &v);
*val = 0xffff & (v >> (8*(where & 3)));
return 0;
case 4:
if (where&3) return -EINVAL;
pcic_read_config_dword(bus->number, devfn, where&~3, val);
return 0;
}
return -EINVAL;
}
static int pcic_write_config_dword(unsigned int busno, unsigned int devfn,
int where, u32 value)
{
struct linux_pcic *pcic;
unsigned long flags;
/* size == 4, i.e. dword */
if (where&3) return PCIBIOS_BAD_REGISTER_NUMBER;
if (busnum != 0) return PCIBIOS_DEVICE_NOT_FOUND;
pcic = &pcic0;
save_and_cli(flags);
writel(CONFIG_CMD(busnum,devfn,where), pcic->pcic_config_space_addr);
local_irq_save(flags);
writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
writel(value, pcic->pcic_config_space_data + (where&4));
restore_flags(flags);
return PCIBIOS_SUCCESSFUL;
local_irq_restore(flags);
return 0;
}
static int pcic_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
unsigned int v;
if (bus->number != 0) return -EINVAL;
switch (size) {
case 1:
pcic_read_config_dword(bus->number, devfn, where&~3, &v);
v = (v & ~(0xff << (8*(where&3)))) |
((0xff&val) << (8*(where&3)));
return pcic_write_config_dword(bus->number, devfn, where&~3, v);
case 2:
if (where&1) return -EINVAL;
pcic_read_config_dword(bus->number, devfn, where&~3, &v);
v = (v & ~(0xffff << (8*(where&3)))) |
((0xffff&val) << (8*(where&3)));
return pcic_write_config_dword(bus->number, devfn, where&~3, v);
case 4:
if (where&3) return -EINVAL;
return pcic_write_config_dword(bus->number, devfn, where, val);
}
return -EINVAL;
}
static struct pci_ops pcic_ops = {
......@@ -420,7 +425,7 @@ static void __init pcic_pbm_scan_bus(struct linux_pcic *pcic)
/*
* Main entry point from the PCI subsystem.
*/
static int __init pcibios_init(void)
static int __init pcic_init(void)
{
struct linux_pcic *pcic;
......@@ -623,7 +628,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
{
struct list_head *walk;
int i, has_io, has_mem;
unsigned short cmd;
unsigned int cmd;
struct linux_pcic *pcic;
/* struct linux_pbm_info* pbm = &pcic->pbm; */
int node;
......@@ -663,19 +668,21 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
} else if (f & IORESOURCE_MEM)
has_mem = 1;
}
pcic_read_config_word(dev, PCI_COMMAND, &cmd);
pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
if (has_io && !(cmd & PCI_COMMAND_IO)) {
printk("PCIC: Enabling I/O for device %02x:%02x\n",
dev->bus->number, dev->devfn);
cmd |= PCI_COMMAND_IO;
pcic_write_config_word(dev, PCI_COMMAND, cmd);
pcic_write_config(dev->bus, dev->devfn,
PCI_COMMAND, 2, cmd);
}
if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) {
printk("PCIC: Enabling memory for device %02x:%02x\n",
dev->bus->number, dev->devfn);
cmd |= PCI_COMMAND_MEMORY;
pcic_write_config_word(dev, PCI_COMMAND, cmd);
}
pcic_write_config(dev->bus, dev->devfn,
PCI_COMMAND, 2, cmd);
}
node = pdev_to_pnode(&pcic->pbm, dev);
if(node == 0)
......@@ -791,7 +798,7 @@ static void pci_do_gettimeofday(struct timeval *tv)
{
unsigned long flags;
save_and_cli(flags);
local_irq_save(flags);
*tv = xtime;
tv->tv_usec += do_gettimeoffset();
......@@ -803,7 +810,7 @@ static void pci_do_gettimeofday(struct timeval *tv)
if ((jiffies - wall_jiffies) != 0)
tv->tv_usec += USECS_PER_JIFFY;
restore_flags(flags);
local_irq_restore(flags);
if (tv->tv_usec >= 1000000) {
tv->tv_usec -= 1000000;
......@@ -813,7 +820,9 @@ static void pci_do_gettimeofday(struct timeval *tv)
static void pci_do_settimeofday(struct timeval *tv)
{
cli();
unsigned long flags;
local_irq_save(flags);
tv->tv_usec -= do_gettimeoffset();
if(tv->tv_usec < 0) {
tv->tv_usec += 1000000;
......@@ -824,7 +833,7 @@ static void pci_do_settimeofday(struct timeval *tv)
time_status |= STA_UNSYNC;
time_maxerror = NTP_PHASE_LIMIT;
time_esterror = NTP_PHASE_LIMIT;
sti();
local_irq_restore(flags);
}
#if 0
......@@ -898,9 +907,9 @@ static void pcic_disable_irq(unsigned int irq_nr)
unsigned long mask, flags;
mask = get_irqmask(irq_nr);
save_and_cli(flags);
local_irq_save(flags);
writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
restore_flags(flags);
local_irq_restore(flags);
}
static void pcic_enable_irq(unsigned int irq_nr)
......@@ -908,9 +917,9 @@ static void pcic_enable_irq(unsigned int irq_nr)
unsigned long mask, flags;
mask = get_irqmask(irq_nr);
save_and_cli(flags);
local_irq_save(flags);
writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
restore_flags(flags);
local_irq_restore(flags);
}
static void pcic_clear_profile_irq(int cpu)
......@@ -1021,4 +1030,4 @@ void insl(unsigned long addr, void *dst, unsigned long count) {
#endif
subsys_initcall(pcibios_init);
subsys_initcall(pcic_init);
arch/sparc/kernel/process.c
View file @ 225b563b
......@@ -94,7 +94,7 @@ int cpu_idle(void)
extern unsigned long sun4c_kernel_faults;
extern void sun4c_grow_kernel_ring(void);
save_and_cli(flags);
local_irq_save(flags);
now = jiffies;
count -= (now - last_jiffies);
last_jiffies = now;
......@@ -110,7 +110,7 @@ int cpu_idle(void)
sun4c_grow_kernel_ring();
}
}
restore_flags(flags);
local_irq_restore(flags);
}
while((!need_resched()) && pm_idle) {
......@@ -144,8 +144,6 @@ int cpu_idle(void)
extern char reboot_command [];
extern int serial_console;
extern void (*prom_palette)(int);
void machine_halt(void)
......
arch/sparc/kernel/setup.c
View file @ 225b563b
......@@ -34,7 +34,6 @@
#include <asm/segment.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/kgdb.h>
#include <asm/processor.h>
#include <asm/oplib.h>
#include <asm/page.h>
......@@ -67,8 +66,6 @@ struct screen_info screen_info = {
*/
extern unsigned long trapbase;
extern int serial_console;
extern void breakpoint(void);
void (*prom_palette)(int);
asmlinkage void sys_sync(void); /* it's really int */
......@@ -105,28 +102,15 @@ void prom_sync_me(void)
return;
}
extern void rs_kgdb_hook(int tty_num); /* sparc/serial.c */
unsigned int boot_flags __initdata = 0;
#define BOOTME_DEBUG 0x1
#define BOOTME_SINGLE 0x2
#define BOOTME_KGDBA 0x4
#define BOOTME_KGDBB 0x8
#define BOOTME_KGDB 0xc
static int console_fb __initdata = 0;
/* Exported for mm/init.c:paging_init. */
unsigned long cmdline_memory_size __initdata = 0;
void kernel_enter_debugger(void)
{
if (boot_flags & BOOTME_KGDB) {
printk("KGDB: Entered\n");
breakpoint();
}
}
static void
prom_console_write(struct console *con, const char *s, unsigned n)
{
......@@ -142,11 +126,6 @@ static struct console prom_debug_console = {
int obp_system_intr(void)
{
if (boot_flags & BOOTME_KGDB) {
printk("KGDB: system interrupted\n");
breakpoint();
return 1;
}
if (boot_flags & BOOTME_DEBUG) {
printk("OBP: system interrupted\n");
prom_halt();
......@@ -196,24 +175,6 @@ static void __init boot_flags_init(char *commands)
commands++;
while (*commands && *commands != ' ')
process_switch(*commands++);
} else if (strlen(commands) >= 9
&& !strncmp(commands, "kgdb=tty", 8)) {
switch (commands[8]) {
#ifdef CONFIG_SUN_SERIAL
case 'a':
boot_flags |= BOOTME_KGDBA;
prom_printf("KGDB: Using serial line /dev/ttya.\n");
break;
case 'b':
boot_flags |= BOOTME_KGDBB;
prom_printf("KGDB: Using serial line /dev/ttyb.\n");
break;
#endif
default:
printk("KGDB: Unknown tty line.\n");
break;
}
commands += 9;
} else {
if (!strncmp(commands, "console=", 8)) {
commands += 8;
......@@ -378,65 +339,48 @@ void __init setup_arch(char **cmdline_p)
prom_setsync(prom_sync_me);
{
#if !CONFIG_SUN_SERIAL
serial_console = 0;
#ifndef CONFIG_SERIAL_CONSOLE /* Not CONFIG_SERIAL_SUNCORE: to be gone. */
serial_console = 0;
#else
switch (console_fb) {
case 0: /* Let get our io devices from prom */
{
int idev = prom_query_input_device();
int odev = prom_query_output_device();
if (idev == PROMDEV_IKBD && odev == PROMDEV_OSCREEN) {
serial_console = 0;
} else if (idev == PROMDEV_ITTYA && odev == PROMDEV_OTTYA) {
serial_console = 1;
} else if (idev == PROMDEV_ITTYB && odev == PROMDEV_OTTYB) {
serial_console = 2;
} else if (idev == PROMDEV_I_UNK && odev == PROMDEV_OTTYA) {
prom_printf("MrCoffee ttya\n");
serial_console = 1;
} else if (idev == PROMDEV_I_UNK && odev == PROMDEV_OSCREEN) {
serial_console = 0;
prom_printf("MrCoffee keyboard\n");
} else {
prom_printf("Inconsistent or unknown console\n");
prom_printf("You cannot mix serial and non serial input/output devices\n");
prom_halt();
}
switch (console_fb) {
case 0: /* Let get our io devices from prom */
{
int idev = prom_query_input_device();
int odev = prom_query_output_device();
if (idev == PROMDEV_IKBD && odev == PROMDEV_OSCREEN) {
serial_console = 0;
} else if (idev == PROMDEV_ITTYA && odev == PROMDEV_OTTYA) {
serial_console = 1;
} else if (idev == PROMDEV_ITTYB && odev == PROMDEV_OTTYB) {
serial_console = 2;
} else if (idev == PROMDEV_I_UNK && odev == PROMDEV_OTTYA) {
prom_printf("MrCoffee ttya\n");
serial_console = 1;
} else if (idev == PROMDEV_I_UNK && odev == PROMDEV_OSCREEN) {
serial_console = 0;
prom_printf("MrCoffee keyboard\n");
} else {
prom_printf("Inconsistent or unknown console\n");
prom_printf("You cannot mix serial and non serial input/output devices\n");
prom_halt();
}
break;
case 1: serial_console = 0; break; /* Force one of the framebuffers as console */
case 2: serial_console = 1; break; /* Force ttya as console */
case 3: serial_console = 2; break; /* Force ttyb as console */
}
#endif
}
if ((boot_flags & BOOTME_KGDBA)) {
rs_kgdb_hook(0);
}
if ((boot_flags & BOOTME_KGDBB)) {
rs_kgdb_hook(1);
break;
case 1: serial_console = 0; break; /* Force one of the framebuffers as console */
case 2: serial_console = 1; break; /* Force ttya as console */
case 3: serial_console = 2; break; /* Force ttyb as console */
}
#endif
if((boot_flags&BOOTME_DEBUG) && (linux_dbvec!=0) &&
((*(short *)linux_dbvec) != -1)) {
printk("Booted under KADB. Syncing trap table.\n");
(*(linux_dbvec->teach_debugger))();
}
if((boot_flags & BOOTME_KGDB)) {
set_debug_traps();
prom_printf ("Breakpoint!\n");
breakpoint();
}
init_mm.context = (unsigned long) NO_CONTEXT;
init_task.thread.kregs = &fake_swapper_regs;
if (serial_console)
conswitchp = NULL;
paging_init();
}
......@@ -514,3 +458,19 @@ struct seq_operations cpuinfo_op = {
.stop = c_stop,
.show = show_cpuinfo,
};
extern int stop_a_enabled;
void sun_do_break(void)
{
if (!stop_a_enabled)
return;
printk("\n");
flush_user_windows();
prom_cmdline();
}
int serial_console;
int stop_a_enabled = 1;
arch/sparc/kernel/sparc-stub.c
View file @ 225b563b
......@@ -188,22 +188,16 @@ static inline void copy_ttentry(struct tt_entry *src, struct tt_entry *dest)
/* Initialize the kgdb_savettable so that debugging can commence */
static void eh_init(void)
{
int i, flags;
int i;
save_and_cli(flags);
for(i=0; i < 256; i++)
copy_ttentry(&sparc_ttable[i], &kgdb_savettable[i]);
restore_flags(flags);
}
/* Install an exception handler for kgdb */
static void exceptionHandler(int tnum, trapfunc_t trap_entry)
{
unsigned long te_addr = (unsigned long) trap_entry;
int flags;
/* We are dorking with a live trap table, all irqs off */
save_and_cli(flags);
/* Make new vector */
sparc_ttable[tnum].inst_one =
......@@ -212,8 +206,6 @@ static void exceptionHandler(int tnum, trapfunc_t trap_entry)
sparc_ttable[tnum].inst_two = SPARC_RD_PSR_L0;
sparc_ttable[tnum].inst_three = SPARC_NOP;
sparc_ttable[tnum].inst_four = SPARC_NOP;
restore_flags(flags);
}
/* Convert ch from a hex digit to an int */
......@@ -406,7 +398,7 @@ set_debug_traps(void)
struct hard_trap_info *ht;
unsigned long flags;
save_and_cli(flags);
local_irq_save(flags);
#if 0
/* Have to sort this out. This cannot be done after initialization. */
BTFIXUPSET_CALL(flush_cache_all, flush_cache_all_nop, BTFIXUPCALL_NOP);
......@@ -438,7 +430,7 @@ set_debug_traps(void)
#endif
initialized = 1; /* connect! */
restore_flags(flags);
local_irq_restore(flags);
}
/* Convert the SPARC hardware trap type code to a unix signal number. */
......
arch/sparc/kernel/tadpole.c
View file @ 225b563b
......@@ -56,6 +56,9 @@ static void clk_slow(void)
"g2", "g3", "g4", "g5");
}
/*
* Tadpole is guaranteed to be UP, using local_irq_save.
*/
static void tsu_clockstop(void)
{
unsigned int mcsr;
......@@ -64,28 +67,28 @@ static void tsu_clockstop(void)
if (!clk_ctrl)
return;
if (!(clk_state & CLOCK_INIT_DONE)) {
save_and_cli(flags);
local_irq_save(flags);
clk_init();
clk_state |= CLOCK_INIT_DONE; /* all done */
restore_flags(flags);
local_irq_restore(flags);
return;
}
if (!(clk_ctrl[2] & 1))
return; /* no speed up yet */
save_and_cli(flags);
local_irq_save(flags);
/* if SCSI DMA in progress, don't slow clock */
mcsr = ldphys(MACIO_SCSI_CSR_ADDR);
if ((mcsr&MACIO_EN_DMA) != 0) {
restore_flags(flags);
local_irq_restore(flags);
return;
}
/* TODO... the minimum clock setting ought to increase the
* memory refresh interval..
*/
clk_slow();
restore_flags(flags);
local_irq_restore(flags);
}
static void swift_clockstop(void)
......
arch/sparc/kernel/tick14.c
View file @ 225b563b
......@@ -29,32 +29,30 @@ extern unsigned long lvl14_save[5];
static unsigned long *linux_lvl14 = NULL;
static unsigned long obp_lvl14[4];
/*
* Call with timer IRQ closed.
* First time we do it with disable_irq, later prom code uses spin_lock_irq().
*/
void install_linux_ticker(void)
{
unsigned long flags;
if (!linux_lvl14)
return;
save_and_cli(flags);
linux_lvl14[0] = lvl14_save[0];
linux_lvl14[1] = lvl14_save[1];
linux_lvl14[2] = lvl14_save[2];
linux_lvl14[3] = lvl14_save[3];
restore_flags(flags);
}
void install_obp_ticker(void)
{
unsigned long flags;
if (!linux_lvl14)
return;
save_and_cli(flags);
linux_lvl14[0] = obp_lvl14[0];
linux_lvl14[1] = obp_lvl14[1];
linux_lvl14[2] = obp_lvl14[2];
linux_lvl14[3] = obp_lvl14[3];
restore_flags(flags);
}
void claim_ticker14(void (*handler)(int, void *, struct pt_regs *),
......
arch/sparc/kernel/unaligned.c
View file @ 225b563b
......@@ -506,9 +506,18 @@ asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn)
break;
case both:
#if 0 /* unsupported */
do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
(unsigned long *) addr,
user_unaligned_trap_fault);
#else
/*
* This was supported in 2.4. However, we question
* the value of SWAP instruction across word boundaries.
*/
printk("Unaligned SWAP unsupported.\n");
goto kill_user;
#endif
break;
default:
......
arch/sparc/mm/srmmu.c
View file @ 225b563b
......@@ -1212,7 +1212,6 @@ extern int linux_num_cpus;
void (*poke_srmmu)(void) __initdata = NULL;
extern unsigned long bootmem_init(unsigned long *pages_avail);
extern void sun_serial_setup(void);
void __init srmmu_paging_init(void)
{
......@@ -1281,13 +1280,6 @@ void __init srmmu_paging_init(void)
flush_cache_all();
flush_tlb_all();
/*
* This does not logically belong here, but we need to
* call it at the moment we are able to use the bootmem
* allocator.
*/
sun_serial_setup();
sparc_context_init(num_contexts);
kmap_init();
......
arch/sparc/mm/sun4c.c
View file @ 225b563b
......@@ -2001,7 +2001,6 @@ extern void sparc_context_init(int);
extern unsigned long end;
extern unsigned long bootmem_init(unsigned long *pages_avail);
extern unsigned long last_valid_pfn;
extern void sun_serial_setup(void);
void __init sun4c_paging_init(void)
{
......@@ -2018,12 +2017,6 @@ void __init sun4c_paging_init(void)
last_valid_pfn = bootmem_init(&pages_avail);
end_pfn = last_valid_pfn;
/* This does not logically belong here, but we need to
* call it at the moment we are able to use the bootmem
* allocator.
*/
sun_serial_setup();
sun4c_probe_mmu();
invalid_segment = (num_segmaps - 1);
sun4c_init_mmu_entry_pool();
......
arch/sparc/prom/misc.c
View file @ 225b563b
......@@ -12,6 +12,7 @@
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/auxio.h>
#include <asm/system.h>
extern void restore_current(void);
......@@ -47,7 +48,6 @@ prom_feval(char *fstring)
/* We want to do this more nicely some day. */
extern void (*prom_palette)(int);
extern int serial_console;
/* Drop into the prom, with the chance to continue with the 'go'
* prom command.
......@@ -55,20 +55,18 @@ extern int serial_console;
void
prom_cmdline(void)
{
extern void kernel_enter_debugger(void);
extern void install_obp_ticker(void);
extern void install_linux_ticker(void);
unsigned long flags;
kernel_enter_debugger();
if(!serial_console && prom_palette)
prom_palette (1);
install_obp_ticker();
spin_lock_irqsave(&prom_lock, flags);
install_obp_ticker();
(*(romvec->pv_abort))();
restore_current();
spin_unlock_irqrestore(&prom_lock, flags);
install_linux_ticker();
spin_unlock_irqrestore(&prom_lock, flags);
#ifdef CONFIG_SUN_AUXIO
TURN_ON_LED;
#endif
......
arch/sparc64/kernel/power.c
View file @ 225b563b
......@@ -11,6 +11,7 @@
#include <linux/signal.h>
#include <linux/delay.h>
#include <asm/system.h>
#include <asm/ebus.h>
#define __KERNEL_SYSCALLS__
......@@ -37,8 +38,6 @@ extern void machine_halt(void);
extern void machine_alt_power_off(void);
static void (*poweroff_method)(void) = machine_alt_power_off;
extern int serial_console;
void machine_power_off(void)
{
if (!serial_console) {
......
arch/sparc64/kernel/process.c
View file @ 225b563b
......@@ -110,7 +110,6 @@ int cpu_idle(void)
extern char reboot_command [];
extern void (*prom_palette)(int);
extern int serial_console;
extern void (*prom_keyboard)(void);
void machine_halt(void)
......
arch/sparc64/kernel/setup.c
View file @ 225b563b
......@@ -314,12 +314,9 @@ int prom_callback(long *args)
return 0;
}
extern void rs_kgdb_hook(int tty_num); /* sparc/serial.c */
unsigned int boot_flags = 0;
#define BOOTME_DEBUG 0x1
#define BOOTME_SINGLE 0x2
#define BOOTME_KGDB 0x4
static int console_fb __initdata = 0;
......@@ -389,26 +386,6 @@ static void __init boot_flags_init(char *commands)
commands++;
while (*commands && *commands != ' ')
process_switch(*commands++);
} else if (strlen(commands) >= 9
&& !strncmp(commands, "kgdb=tty", 8)) {
boot_flags |= BOOTME_KGDB;
switch (commands[8]) {
#ifdef CONFIG_SUN_SERIAL
case 'a':
rs_kgdb_hook(0);
prom_printf("KGDB: Using serial line /dev/ttya.\n");
break;
case 'b':
rs_kgdb_hook(1);
prom_printf("KGDB: Using serial line /dev/ttyb.\n");
break;
#endif
default:
printk("KGDB: Unknown tty line.\n");
boot_flags &= ~BOOTME_KGDB;
break;
}
commands += 9;
} else {
if (!strncmp(commands, "console=", 8)) {
commands += 8;
......@@ -484,7 +461,6 @@ extern void paging_init(void);
void __init setup_arch(char **cmdline_p)
{
extern int serial_console; /* in console.c, of course */
unsigned long highest_paddr;
int i;
......@@ -568,7 +544,6 @@ void __init setup_arch(char **cmdline_p)
}
#endif
#ifdef CONFIG_SUN_SERIAL
switch (console_fb) {
case 0: /* Let's get our io devices from prom */
{
......@@ -597,10 +572,7 @@ void __init setup_arch(char **cmdline_p)
case 3: /* Force ttyb as console */
serial_console = 2;
break;
}
#else
serial_console = 0;
#endif
};
if (serial_console)
conswitchp = NULL;
......
arch/sparc64/mm/init.c
View file @ 225b563b
......@@ -1515,14 +1515,6 @@ void __init paging_init(void)
pages_avail = 0;
last_valid_pfn = end_pfn = bootmem_init(&pages_avail);
#ifdef CONFIG_SUN_SERIAL
/* This does not logically belong here, but we need to
* call it at the moment we are able to use the bootmem
* allocator.
*/
sun_serial_setup();
#endif
/* Inherit non-locked OBP mappings. */
inherit_prom_mappings();
......
arch/sparc64/prom/misc.c
View file @ 225b563b
......@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/system.h>
/* Reset and reboot the machine with the command 'bcommand'. */
void prom_reboot(char *bcommand)
......@@ -33,7 +34,6 @@ void prom_feval(char *fstring)
/* We want to do this more nicely some day. */
extern void (*prom_palette)(int);
extern int serial_console;
#ifdef CONFIG_SMP
extern void smp_capture(void);
......
drivers/serial/sunsu.c
View file @ 225b563b
......@@ -34,6 +34,7 @@
#include <linux/serio.h>
#endif
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
......@@ -1019,6 +1020,8 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up)
if (!up->port_node || !up->su_type)
return;
up->port.iotype = SERIAL_IO_MEM;
/*
* First we look for Ebus-bases su's
*/
......
drivers/serial/sunzilog.c
View file @ 225b563b
......@@ -382,13 +382,6 @@ static void sunzilog_receive_chars(struct uart_sunzilog_port *up,
sun_do_break();
return;
}
#ifndef CONFIG_SPARC64
/* Look for kgdb 'stop' character. */
if (ZS_IS_KGDB(up) && (ch == '\003')) {
breakpoint();
return;
}
#endif
/* A real serial line, record the character and status. */
*tty->flip.char_buf_ptr = ch;
......@@ -1152,11 +1145,11 @@ static struct zilog_layout * __init get_zs_sun4u(int chip)
static struct zilog_layout * __init get_zs_sun4cmd(int chip)
{
struct linux_prom_irqs irq_info[2];
unsigned long mapped_addr;
int zsnode, chipid, cpunode;
unsigned long mapped_addr = 0;
int zsnode, chipid, cpunode, bbnode;
if (sparc_cpu_model == sun4d) {
int bbnode, walk, no;
int walk, no;
zsnode = 0;
bbnode = 0;
......@@ -1249,7 +1242,7 @@ static struct zilog_layout * __init get_zs_sun4cmd(int chip)
} else if (zilog_irq != irq_info[0].pri) {
prom_printf("SunZilog: Inconsistent IRQ layout for Zilog %d.\n",
chip);
promt_halt();
prom_halt();
}
break;
}
......@@ -1290,7 +1283,7 @@ static struct zilog_layout * __init get_zs(int chip)
zilog_irq = 12;
res.end = (res.start + (8 - 1));
res.flags = IORESOURCE_IO;
return sbus_ioremap(&res, 0, 8, "SunZilog");
return (struct zilog_layout *) sbus_ioremap(&res, 0, 8, "SunZilog");
}
return get_zs_sun4cmd(chip);
......@@ -1649,13 +1642,10 @@ static int __init sunzilog_init(void)
/* Sun4 Zilog setup is hard coded, no probing to do. */
if (sparc_cpu_model == sun4) {
NUM_SUNZILOG = 2;
goto no_probe;
}
node = prom_getchild(prom_root_node);
if (sparc_cpu_model == sun4d) {
} else if (sparc_cpu_model == sun4d) {
int bbnode;
node = prom_getchild(prom_root_node);
NUM_SUNZILOG = 0;
while (node &&
(node = prom_searchsiblings(node, "cpu-unit"))) {
......@@ -1664,7 +1654,6 @@ static int __init sunzilog_init(void)
NUM_SUNZILOG += 2;
node = prom_getsibling(node);
}
goto no_probe;
} else if (sparc_cpu_model == sun4u) {
int central_node;
......@@ -1675,27 +1664,28 @@ static int __init sunzilog_init(void)
if (central_node != 0 && central_node != -1)
node = prom_searchsiblings(prom_getchild(central_node), "fhc");
else
node = prom_searchsiblings(node, "sbus");
node = prom_searchsiblings(prom_getchild(prom_root_node), "sbus");
if (node != 0 && node != -1)
node = prom_getchild(node);
if (node == 0 || node == -1)
return -ENODEV;
node = prom_searchsiblings(node, "zs");
if (!node)
return -ENODEV;
NUM_SUNZILOG = 2;
} else {
node = prom_getchild(prom_root_node);
node = prom_searchsiblings(node, "obio");
if (node)
node = prom_getchild(node);
if (!node)
return -ENODEV;
NUM_SUNZILOG = 2;
goto no_probe;
}
node = prom_searchsiblings(node, "zs");
if (!node)
return -ENODEV;
NUM_SUNZILOG = 2;
no_probe:
sunzilog_alloc_tables();
sunzilog_ports_init();
......
include/asm-sparc/hardirq.h
View file @ 225b563b
......@@ -121,7 +121,7 @@ do { \
#ifndef CONFIG_SMP
#define synchronize_irq() barrier()
#define synchronize_irq(irq) barrier()
#else /* (CONFIG_SMP) */
......
include/asm-sparc/irq.h
View file @ 225b563b
......@@ -21,6 +21,8 @@ BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int)
#define NR_IRQS 15
#define irq_cannonicalize(irq) (irq)
/* Dave Redman (djhr@tadpole.co.uk)
* changed these to function pointers.. it saves cycles and will allow
* the irq dependencies to be split into different files at a later date
......
include/asm-sparc/kmap_types.h
View file @ 225b563b
......@@ -11,6 +11,8 @@ enum km_type {
KM_BIO_DST_IRQ,
KM_PTE0,
KM_PTE1,
KM_IRQ0,
KM_IRQ1,
KM_TYPE_NR
};
......
include/asm-sparc/system.h
View file @ 225b563b
......@@ -56,6 +56,17 @@ extern unsigned long empty_zero_page;
extern struct linux_romvec *romvec;
#define halt() romvec->pv_halt()
extern void sun_do_break(void);
extern int serial_console;
extern int stop_a_enabled;
static __inline__ int con_is_present(void)
{
return serial_console ? 0 : 1;
}
extern struct pt_regs *kbd_pt_regs;
/* When a context switch happens we must flush all user windows so that
* the windows of the current process are flushed onto its stack. This
* way the windows are all clean for the next process and the stack
......@@ -113,6 +124,7 @@ extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
"restore; restore; restore; restore; restore; restore; restore"); \
} while(0)
#define finish_arch_switch(rq, next) do{ }while(0)
#define task_running(rq, p) ((rq)->curr == (p))
/* Much care has gone into this code, do not touch it.
*
......@@ -282,9 +294,6 @@ extern void __global_restore_flags(unsigned long flags);
#define cli() local_irq_disable()
#define sti() local_irq_enable()
#define save_flags(x) local_save_flags(x)
#define restore_flags(x) local_irq_restore(x)
#define save_and_cli(x) local_irq_save(x)
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7