Merge nuts.ninka.net:/home/davem/src/BK/zaitcev-2.5

into nuts.ninka.net:/home/davem/src/BK/sparc-2.5

arch/sparc/config.in

@@ -59,6 +59,9 @@ endmenu
 mainmenu_option next_comment
 comment 'Console drivers'
 bool 'PROM console' CONFIG_PROM_CONSOLE
+if [ "$CONFIG_PROM_CONSOLE" != "y" ]; then
+   define_bool CONFIG_DUMMY_CONSOLE y
+fi
 source drivers/video/Config.in
 endmenu
 
@@ -214,6 +217,8 @@ if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
 fi
 endmenu
 
+source drivers/input/Config.in
+
 source fs/Config.in
 
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then

arch/sparc/defconfig

@@ -3,6 +3,12 @@
 #
 CONFIG_UID16=y
 CONFIG_HIGHMEM=y
+CONFIG_GENERIC_ISA_DMA=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
 
 #
 # General setup
@@ -12,11 +18,6 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
 #
 # Loadable module support
 #
@@ -29,6 +30,7 @@ CONFIG_KMOD=y
 #
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
 # CONFIG_SMP is not set
 CONFIG_SPARC32=y
 # CONFIG_ISA is not set
@@ -37,20 +39,15 @@ CONFIG_SPARC32=y
 # CONFIG_PCMCIA is not set
 CONFIG_SBUS=y
 CONFIG_SBUSCHAR=y
-CONFIG_BUSMOUSE=y
-CONFIG_SUN_MOUSE=y
-CONFIG_SERIAL=y
-CONFIG_SUN_SERIAL=y
 CONFIG_SERIAL_CONSOLE=y
-CONFIG_SUN_KEYBOARD=y
-CONFIG_SUN_CONSOLE=y
 CONFIG_SUN_AUXIO=y
 CONFIG_SUN_IO=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_SUN_PM=y
 # CONFIG_SUN4 is not set
-# CONFIG_PCI is not set
+CONFIG_PCI=y
+# CONFIG_PCI_NAMES is not set
 CONFIG_SUN_OPENPROMFS=m
 CONFIG_KCORE_ELF=y
 CONFIG_BINFMT_AOUT=y
@@ -67,35 +64,43 @@ CONFIG_SUNOS_EMUL=y
 #
 # Console drivers
 #
-CONFIG_PROM_CONSOLE=y
+# CONFIG_PROM_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
 
 #
 # Frame-buffer support
 #
-CONFIG_FB=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_SBUS=y
-CONFIG_FB_CGSIX=y
-CONFIG_FB_BWTWO=y
-CONFIG_FB_CGTHREE=y
-CONFIG_FB_TCX=y
-CONFIG_FB_CGFOURTEEN=y
-# CONFIG_FB_P9100 is not set
-CONFIG_FB_LEO=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FBCON_ADVANCED is not set
-CONFIG_FBCON_MFB=y
-CONFIG_FBCON_CFB8=y
-CONFIG_FBCON_FONTWIDTH8_ONLY=y
-CONFIG_FONT_SUN8x16=y
-# CONFIG_FBCON_FONTS is not set
+# CONFIG_FB is not set
 
 #
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
 
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_CS is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SUNCORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SUNZILOG=y
+CONFIG_SERIAL_SUNSU=y
+# CONFIG_SERIAL_SUNSAB is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+
 #
 # Misc Linux/SPARC drivers
 #
@@ -103,9 +108,11 @@ CONFIG_SUN_OPENPROMIO=m
 CONFIG_SUN_MOSTEK_RTC=y
 # CONFIG_SUN_BPP is not set
 # CONFIG_SUN_VIDEOPIX is not set
-CONFIG_SUN_AURORA=m
+# CONFIG_SUN_AURORA is not set
 # CONFIG_TADPOLE_TS102_UCTRL is not set
 # CONFIG_SUN_JSFLASH is not set
+CONFIG_APM_RTC_IS_GMT=y
+# CONFIG_RTC is not set
 
 #
 # Linux/SPARC audio subsystem (EXPERIMENTAL)
@@ -119,9 +126,9 @@ CONFIG_SUN_AURORA=m
 #
 # Block devices
 #
-CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_DEV_FD is not set
 CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_NBD is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -138,6 +145,31 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN_BOOL is not set
+
+#
+# SCSI support
+#
+# CONFIG_SCSI is not set
+
+#
+# Fibre Channel support
+#
+# CONFIG_FC4 is not set
+# CONFIG_FC4_SOC is not set
+# CONFIG_FC4_SOCAL is not set
+# CONFIG_SCSI_PLUTO is not set
+# CONFIG_SCSI_FCAL is not set
+
 #
 # Networking options
 #
@@ -150,30 +182,35 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
 # CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 CONFIG_IPV6=m
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
 
 #
+#    SCTP Configuration (EXPERIMENTAL)
 #
-#
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DECNET=m
-CONFIG_DECNET_SIOCGIFCONF=y
-# CONFIG_DECNET_ROUTER is not set
+CONFIG_IPV6_SCTP__=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_ADLER32 is not set
+# CONFIG_SCTP_DBG_MSG is not set
+CONFIG_SCTP_DBG_OBJCNT=y
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_LLC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -184,83 +221,22 @@ CONFIG_DECNET_SIOCGIFCONF=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# SCSI support
-#
-CONFIG_SCSI=y
-
-#
-# SCSI support type (disk, tape, CDrom)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_SD_EXTRA_DEVS=40
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_SR_EXTRA_DEVS=2
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SCSI_SUNESP=y
-CONFIG_SCSI_QLOGICPTI=m
-
-#
-# Fibre Channel support
-#
-CONFIG_FC4=m
-
-#
-# FC4 drivers
-#
-CONFIG_FC4_SOC=m
-CONFIG_FC4_SOCAL=m
-
-#
-# FC4 targets
-#
-CONFIG_SCSI_PLUTO=m
-CONFIG_SCSI_FCAL=m
 
 #
 # Network device support
 #
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_TUN is not set
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_SUNLANCE=y
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNBMAC=m
+# CONFIG_BONDING is not set
+CONFIG_TUN=m
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_SUNLANCE=m
+CONFIG_HAPPYMEAL=y
+# CONFIG_SUNBMAC is not set
 CONFIG_SUNQE=m
-CONFIG_MYRI_SBUS=m
+# CONFIG_MYRI_SBUS is not set
+CONFIG_VORTEX=m
 
 #
 # Unix98 PTY support
@@ -272,6 +248,8 @@ CONFIG_UNIX98_PTY_COUNT=256
 # File systems
 #
 # CONFIG_QUOTA is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_REISERFS_FS is not set
@@ -279,17 +257,17 @@ CONFIG_AUTOFS4_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_ADFS_FS is not set
 # CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
+# CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=m
-CONFIG_JBD=m
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
 # CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
+# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
 # CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_EFS_FS=m
+# CONFIG_VFAT_FS is not set
+# CONFIG_EFS_FS is not set
 # CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
@@ -298,12 +276,15 @@ CONFIG_RAMFS=y
 CONFIG_ISO9660_FS=m
 # CONFIG_JOLIET is not set
 # CONFIG_ZISOFS is not set
-CONFIG_MINIX_FS=m
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_NTFS_FS is not set
 # CONFIG_NTFS_DEBUG is not set
 # CONFIG_NTFS_RW is not set
-CONFIG_HPFS_FS=m
+# CONFIG_HPFS_FS is not set
 CONFIG_PROC_FS=y
 # CONFIG_DEVFS_FS is not set
 # CONFIG_DEVFS_MOUNT is not set
@@ -313,26 +294,27 @@ CONFIG_DEVPTS_FS=y
 # CONFIG_QNX4FS_RW is not set
 CONFIG_ROMFS_FS=m
 CONFIG_EXT2_FS=y
-CONFIG_SYSV_FS=m
+# CONFIG_SYSV_FS is not set
 # CONFIG_UDF_FS is not set
 # CONFIG_UDF_RW is not set
-CONFIG_UFS_FS=m
+# CONFIG_UFS_FS is not set
 # CONFIG_UFS_FS_WRITE is not set
 
 #
 # Network File Systems
 #
-CONFIG_CODA_FS=m
-CONFIG_INTERMEZZO_FS=m
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_NFSD=m
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 # CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
 CONFIG_SUNRPC=y
 CONFIG_LOCKD=y
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_EXPORTFS is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_NCPFS_PACKET_SIGNING is not set
 # CONFIG_NCPFS_IOCTL_LOCKING is not set
@@ -343,7 +325,6 @@ CONFIG_SMB_FS=m
 # CONFIG_NCPFS_NLS is not set
 # CONFIG_NCPFS_EXTRAS is not set
 # CONFIG_ZISOFS_FS is not set
-# CONFIG_ZLIB_FS_INFLATE is not set
 
 #
 # Partition Types
@@ -351,49 +332,8 @@ CONFIG_SMB_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-CONFIG_SMB_NLS=y
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+# CONFIG_SMB_NLS is not set
+# CONFIG_NLS is not set
 
 #
 # Bluetooth support
@@ -408,9 +348,18 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SPINLOCK=y
+
+#
+# Security options
+#
+CONFIG_SECURITY_CAPABILITIES=y
 
 #
 # Library routines
 #
 CONFIG_CRC32=y
+# CONFIG_ZLIB_INFLATE is not set
+# CONFIG_ZLIB_DEFLATE is not set

arch/sparc/kernel/Makefile

@@ -13,7 +13,7 @@ export-objs := sparc_ksyms.o
 IRQ_OBJS := irq.o sun4m_irq.o sun4c_irq.o sun4d_irq.o
 obj-y    := entry.o wof.o wuf.o etrap.o rtrap.o traps.o ${IRQ_OBJS} \
 	    process.o signal.o ioport.o setup.o idprom.o \
-	    sys_sparc.o sunos_asm.o sparc-stub.o systbls.o \
+	    sys_sparc.o sunos_asm.o systbls.o \
 	    time.o windows.o cpu.o devices.o sclow.o \
 	    tadpole.o tick14.o ptrace.o sys_solaris.o \
 	    unaligned.o muldiv.o pcic.o semaphore.o sparc_ksyms.o

arch/sparc/kernel/ebus.c

@@ -24,8 +24,6 @@
 
 struct linux_ebus *ebus_chain = 0;
 
-extern void rs_init(void);
-
 /* We are together with pcic.c under CONFIG_PCI. */
 extern unsigned int pcic_pin_to_irq(unsigned int, char *name);
 
@@ -361,6 +359,4 @@ void __init ebus_init(void)
 		ebus->next = 0;
 		++num_ebus;
 	}
-
-	rs_init();
 }

arch/sparc/kernel/entry.S

@@ -53,6 +53,7 @@ in_trap_handler:
 	.text
 	.align	4
 
+#if 0 /* kgdb is dropped from 2.5.33 */
 ! This function is called when any SPARC trap (except window overflow or
 ! underflow) occurs.  It makes sure that the invalid register window is still
 ! available before jumping into C code.  It will also restore the world if you
@@ -119,7 +120,7 @@ C_LABEL(trap_low):
 	STORE_PT_PRIV(sp, l0, l1, l2)
 
 	RESTORE_ALL
-
+#endif
 
 #ifdef CONFIG_BLK_DEV_FD
 	.text

arch/sparc/kernel/pcic.c

-/* $Id: pcic.c,v 1.23 2002/01/23 14:33:55 davem Exp $
- * pcic.c: Sparc/PCI controller support
+/*
+ * pcic.c: MicroSPARC-IIep PCI controller support
  *
  * Copyright (C) 1998 V. Roganov and G. Raiko
  *
@@ -193,48 +193,26 @@ static void pci_do_settimeofday(struct timeval *tv);
 
 #define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
 
-static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
-			    int where, int size, u32 *value)
+static int pcic_read_config_dword(unsigned int busno, unsigned int devfn,
+    int where, u32 *value)
 {
-	unsigned int v;
-	unsigned char busnum = bus->number;
 	struct linux_pcic *pcic;
 	unsigned long flags;
-	/* unsigned char where; */
-
-	switch (size) {
-	case 1:
-		pcic_read_config(bus, devfn, where&~3, 4, &v);
-		*value = 0xff & (v >> (8*(where & 3)));
-		return PCIBIOS_SUCCESSFUL;
-		break;
 
-	case 2:
-		if (where&1) return PCIBIOS_BAD_REGISTER_NUMBER;
-
-		pcic_read_config(bus, devfn, where&~3, 4, &v);
-		*value = 0xffff & (v >> (8*(where & 3)));
-		return PCIBIOS_SUCCESSFUL;
-		break;
-	}
-
-	/* size == 4, i.e. dword */
-	if (where&3) return PCIBIOS_BAD_REGISTER_NUMBER;
-	if (busnum != 0) return PCIBIOS_DEVICE_NOT_FOUND;
 	pcic = &pcic0;
 
-	save_and_cli(flags);
+	local_irq_save(flags);
 #if 0 /* does not fail here */
 	pcic_speculative = 1;
 	pcic_trapped = 0;
 #endif
-	writel(CONFIG_CMD(busnum,devfn,where), pcic->pcic_config_space_addr);
+	writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
 #if 0 /* does not fail here */
 	nop();
 	if (pcic_trapped) {
-		restore_flags(flags);
+		local_irq_restore(flags);
 		*value = ~0;
-		return PCIBIOS_SUCCESSFUL;
+		return 0;
 	}
 #endif
 	pcic_speculative = 2;
@@ -243,50 +221,77 @@ static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
 	nop();
 	if (pcic_trapped) {
 		pcic_speculative = 0;
-		restore_flags(flags);
+		local_irq_restore(flags);
 		*value = ~0;
-		return PCIBIOS_SUCCESSFUL;
+		return 0;
 	}
 	pcic_speculative = 0;
-	restore_flags(flags);
-	return PCIBIOS_SUCCESSFUL;
+	local_irq_restore(flags);
+	return 0;
 }
 
-static int pcic_write_config(struct pci_bus *bus, unsigned int devfn,
-			     int where, int size, u32 value)
+static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
+   int where, int size, u32 *val)
 {
 	unsigned int v;
-	unsigned char busnum = bus->number;
-	struct linux_pcic *pcic;
-	unsigned long flags;
 
+	if (bus->number != 0) return -EINVAL;
 	switch (size) {
 	case 1:
-		pcic_read_config(bus, devfn, where&~3, 4, &v);
-	        v = (v & ~(0xff << (8*(where&3)))) |
-	            ((0xff&(unsigned)value) << (8*(where&3)));
-		return pcic_write_config(bus, devfn, where&~3, 4, v);
-		break;
-
+		pcic_read_config_dword(bus->number, devfn, where&~3, &v);
+		*val = 0xff & (v >> (8*(where & 3)));
+		return 0;
 	case 2:
-		if (where&1) return PCIBIOS_BAD_REGISTER_NUMBER;
-		pcic_read_config(bus, devfn, where&~3, 4, &v);
-		v = (v & ~(0xffff << (8*(where&3)))) |
-		    ((0xffff&(unsigned)value) << (8*(where&3)));
-		return pcic_write_config(bus, devfn, where&~3, 4, v);
-		break;
+		if (where&1) return -EINVAL;
+		pcic_read_config_dword(bus->number, devfn, where&~3, &v);
+		*val = 0xffff & (v >> (8*(where & 3)));
+		return 0;
+	case 4:
+		if (where&3) return -EINVAL;
+		pcic_read_config_dword(bus->number, devfn, where&~3, val);
+		return 0;
 	}
+	return -EINVAL;
+}
+
+static int pcic_write_config_dword(unsigned int busno, unsigned int devfn,
+    int where, u32 value)
+{
+	struct linux_pcic *pcic;
+	unsigned long flags;
 
-	/* size == 4, i.e. dword */
-	if (where&3) return PCIBIOS_BAD_REGISTER_NUMBER;
-	if (busnum != 0) return PCIBIOS_DEVICE_NOT_FOUND;
 	pcic = &pcic0;
 
-	save_and_cli(flags);
-	writel(CONFIG_CMD(busnum,devfn,where), pcic->pcic_config_space_addr);
+	local_irq_save(flags);
+	writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
 	writel(value, pcic->pcic_config_space_data + (where&4));
-	restore_flags(flags);
-	return PCIBIOS_SUCCESSFUL;
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int pcic_write_config(struct pci_bus *bus, unsigned int devfn,
+   int where, int size, u32 val)
+{
+	unsigned int v;
+
+	if (bus->number != 0) return -EINVAL;
+	switch (size) {
+	case 1:
+		pcic_read_config_dword(bus->number, devfn, where&~3, &v);
+		v = (v & ~(0xff << (8*(where&3)))) |
+		    ((0xff&val) << (8*(where&3)));
+		return pcic_write_config_dword(bus->number, devfn, where&~3, v);
+	case 2:
+		if (where&1) return -EINVAL;
+		pcic_read_config_dword(bus->number, devfn, where&~3, &v);
+		v = (v & ~(0xffff << (8*(where&3)))) |
+		    ((0xffff&val) << (8*(where&3)));
+		return pcic_write_config_dword(bus->number, devfn, where&~3, v);
+	case 4:
+		if (where&3) return -EINVAL;
+		return pcic_write_config_dword(bus->number, devfn, where, val);
+	}
+	return -EINVAL;
 }
 
 static struct pci_ops pcic_ops = {
@@ -420,7 +425,7 @@ static void __init pcic_pbm_scan_bus(struct linux_pcic *pcic)
 /*
  * Main entry point from the PCI subsystem.
  */
-static int __init pcibios_init(void)
+static int __init pcic_init(void)
 {
 	struct linux_pcic *pcic;
 
@@ -623,7 +628,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct list_head *walk;
 	int i, has_io, has_mem;
-	unsigned short cmd;
+	unsigned int cmd;
 	struct linux_pcic *pcic;
 	/* struct linux_pbm_info* pbm = &pcic->pbm; */
 	int node;
@@ -663,18 +668,20 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
 			} else if (f & IORESOURCE_MEM)
 				has_mem = 1;
 		}
-		pcic_read_config_word(dev, PCI_COMMAND, &cmd);
+		pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
 		if (has_io && !(cmd & PCI_COMMAND_IO)) {
 			printk("PCIC: Enabling I/O for device %02x:%02x\n",
 				dev->bus->number, dev->devfn);
 			cmd |= PCI_COMMAND_IO;
-			pcic_write_config_word(dev, PCI_COMMAND, cmd);
+			pcic_write_config(dev->bus, dev->devfn,
+			    PCI_COMMAND, 2, cmd);
 		}
 		if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) {
 			printk("PCIC: Enabling memory for device %02x:%02x\n",
 				dev->bus->number, dev->devfn);
 			cmd |= PCI_COMMAND_MEMORY;
-			pcic_write_config_word(dev, PCI_COMMAND, cmd);
+			pcic_write_config(dev->bus, dev->devfn,
+			    PCI_COMMAND, 2, cmd);
 		}
 
 		node = pdev_to_pnode(&pcic->pbm, dev);
@@ -791,7 +798,7 @@ static void pci_do_gettimeofday(struct timeval *tv)
 {
  	unsigned long flags;
 
-	save_and_cli(flags);
+	local_irq_save(flags);
 	*tv = xtime;
 	tv->tv_usec += do_gettimeoffset();
 
@@ -803,7 +810,7 @@ static void pci_do_gettimeofday(struct timeval *tv)
 	if ((jiffies - wall_jiffies) != 0)
 		tv->tv_usec += USECS_PER_JIFFY;
 
-	restore_flags(flags);
+	local_irq_restore(flags);
 
 	if (tv->tv_usec >= 1000000) {
 		tv->tv_usec -= 1000000;
@@ -813,7 +820,9 @@ static void pci_do_gettimeofday(struct timeval *tv)
 
 static void pci_do_settimeofday(struct timeval *tv)
 {
-	cli();
+ 	unsigned long flags;
+
+	local_irq_save(flags);
 	tv->tv_usec -= do_gettimeoffset();
 	if(tv->tv_usec < 0) {
 		tv->tv_usec += 1000000;
@@ -824,7 +833,7 @@ static void pci_do_settimeofday(struct timeval *tv)
 	time_status |= STA_UNSYNC;
 	time_maxerror = NTP_PHASE_LIMIT;
 	time_esterror = NTP_PHASE_LIMIT;
-	sti();
+	local_irq_restore(flags);
 }
 
 #if 0
@@ -898,9 +907,9 @@ static void pcic_disable_irq(unsigned int irq_nr)
 	unsigned long mask, flags;
 
 	mask = get_irqmask(irq_nr);
-	save_and_cli(flags);
+	local_irq_save(flags);
 	writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 static void pcic_enable_irq(unsigned int irq_nr)
@@ -908,9 +917,9 @@ static void pcic_enable_irq(unsigned int irq_nr)
 	unsigned long mask, flags;
 
 	mask = get_irqmask(irq_nr);
-	save_and_cli(flags);
+	local_irq_save(flags);
 	writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 static void pcic_clear_profile_irq(int cpu)
@@ -1021,4 +1030,4 @@ void insl(unsigned long addr, void *dst, unsigned long count) {
 
 #endif
 
-subsys_initcall(pcibios_init);
+subsys_initcall(pcic_init);

arch/sparc/kernel/process.c

@@ -94,7 +94,7 @@ int cpu_idle(void)
 			extern unsigned long sun4c_kernel_faults;
 			extern void sun4c_grow_kernel_ring(void);
 
-			save_and_cli(flags);
+			local_irq_save(flags);
 			now = jiffies;
 			count -= (now - last_jiffies);
 			last_jiffies = now;
@@ -110,7 +110,7 @@ int cpu_idle(void)
 					sun4c_grow_kernel_ring();
 				}
 			}
-			restore_flags(flags);
+			local_irq_restore(flags);
 		}
 
 		while((!need_resched()) && pm_idle) {
@@ -144,8 +144,6 @@ int cpu_idle(void)
 
 extern char reboot_command [];
 
-extern int serial_console;
-
 extern void (*prom_palette)(int);
 
 void machine_halt(void)

arch/sparc/kernel/setup.c

@@ -34,7 +34,6 @@
 #include <asm/segment.h>
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/kgdb.h>
 #include <asm/processor.h>
 #include <asm/oplib.h>
 #include <asm/page.h>
@@ -67,8 +66,6 @@ struct screen_info screen_info = {
  */
 
 extern unsigned long trapbase;
-extern int serial_console;
-extern void breakpoint(void);
 void (*prom_palette)(int);
 asmlinkage void sys_sync(void);	/* it's really int */
 
@@ -105,28 +102,15 @@ void prom_sync_me(void)
 	return;
 }
 
-extern void rs_kgdb_hook(int tty_num); /* sparc/serial.c */
-
 unsigned int boot_flags __initdata = 0;
 #define BOOTME_DEBUG  0x1
 #define BOOTME_SINGLE 0x2
-#define BOOTME_KGDBA  0x4
-#define BOOTME_KGDBB  0x8
-#define BOOTME_KGDB   0xc
 
 static int console_fb __initdata = 0;
 
 /* Exported for mm/init.c:paging_init. */
 unsigned long cmdline_memory_size __initdata = 0;
 
-void kernel_enter_debugger(void)
-{
-	if (boot_flags & BOOTME_KGDB) {
-		printk("KGDB: Entered\n");
-		breakpoint();
-	}
-}
-
 static void
 prom_console_write(struct console *con, const char *s, unsigned n)
 {
@@ -142,11 +126,6 @@ static struct console prom_debug_console = {
 
 int obp_system_intr(void)
 {
-	if (boot_flags & BOOTME_KGDB) {
-		printk("KGDB: system interrupted\n");
-		breakpoint();
-		return 1;
-	}
 	if (boot_flags & BOOTME_DEBUG) {
 		printk("OBP: system interrupted\n");
 		prom_halt();
@@ -196,24 +175,6 @@ static void __init boot_flags_init(char *commands)
 			commands++;
 			while (*commands && *commands != ' ')
 				process_switch(*commands++);
-		} else if (strlen(commands) >= 9
-			   && !strncmp(commands, "kgdb=tty", 8)) {
-			switch (commands[8]) {
-#ifdef CONFIG_SUN_SERIAL
-			case 'a':
-				boot_flags |= BOOTME_KGDBA;
-				prom_printf("KGDB: Using serial line /dev/ttya.\n");
-				break;
-			case 'b':
-				boot_flags |= BOOTME_KGDBB;
-				prom_printf("KGDB: Using serial line /dev/ttyb.\n");
-				break;
-#endif
-			default:
-				printk("KGDB: Unknown tty line.\n");
-				break;
-			}
-			commands += 9;
 		} else {
 			if (!strncmp(commands, "console=", 8)) {
 				commands += 8;
@@ -378,8 +339,7 @@ void __init setup_arch(char **cmdline_p)
 
 	prom_setsync(prom_sync_me);
 
-	{
-#if !CONFIG_SUN_SERIAL
+#ifndef CONFIG_SERIAL_CONSOLE	/* Not CONFIG_SERIAL_SUNCORE: to be gone. */
 	serial_console = 0;
 #else
 	switch (console_fb) {
@@ -411,32 +371,16 @@ void __init setup_arch(char **cmdline_p)
 	case 3: serial_console = 2; break; /* Force ttyb as console */
 	}
 #endif
-	}
-
-	if ((boot_flags & BOOTME_KGDBA)) {
-		rs_kgdb_hook(0);
-	}
-	if ((boot_flags & BOOTME_KGDBB)) {
-		rs_kgdb_hook(1);
-	}
 
 	if((boot_flags&BOOTME_DEBUG) && (linux_dbvec!=0) && 
 	   ((*(short *)linux_dbvec) != -1)) {
 		printk("Booted under KADB. Syncing trap table.\n");
 		(*(linux_dbvec->teach_debugger))();
 	}
-	if((boot_flags & BOOTME_KGDB)) {
-		set_debug_traps();
-		prom_printf ("Breakpoint!\n");
-		breakpoint();
-	}
 
 	init_mm.context = (unsigned long) NO_CONTEXT;
 	init_task.thread.kregs = &fake_swapper_regs;
 
-	if (serial_console)
-		conswitchp = NULL;
-
 	paging_init();
 }
 
@@ -514,3 +458,19 @@ struct seq_operations cpuinfo_op = {
 	.stop =	c_stop,
 	.show =	show_cpuinfo,
 };
+
+extern int stop_a_enabled;
+
+void sun_do_break(void)
+{
+	if (!stop_a_enabled)
+		return;
+
+	printk("\n");
+	flush_user_windows();
+
+	prom_cmdline();
+}
+
+int serial_console;
+int stop_a_enabled = 1;

arch/sparc/kernel/sparc-stub.c

@@ -188,22 +188,16 @@ static inline void copy_ttentry(struct tt_entry *src, struct tt_entry *dest)
 /* Initialize the kgdb_savettable so that debugging can commence */
 static void eh_init(void)
 {
-	int i, flags;
+	int i;
 
-	save_and_cli(flags);
 	for(i=0; i < 256; i++)
 		copy_ttentry(&sparc_ttable[i], &kgdb_savettable[i]);
-	restore_flags(flags);
 }
 
 /* Install an exception handler for kgdb */
 static void exceptionHandler(int tnum, trapfunc_t trap_entry)
 {
 	unsigned long te_addr = (unsigned long) trap_entry;
-	int flags;
-
-	/* We are dorking with a live trap table, all irqs off */
-	save_and_cli(flags);
 
 	/* Make new vector */
 	sparc_ttable[tnum].inst_one =
@@ -212,8 +206,6 @@ static void exceptionHandler(int tnum, trapfunc_t trap_entry)
 	sparc_ttable[tnum].inst_two = SPARC_RD_PSR_L0;
 	sparc_ttable[tnum].inst_three = SPARC_NOP;
 	sparc_ttable[tnum].inst_four = SPARC_NOP;
-
-	restore_flags(flags);
 }
 
 /* Convert ch from a hex digit to an int */
@@ -406,7 +398,7 @@ set_debug_traps(void)
 	struct hard_trap_info *ht;
 	unsigned long flags;
 
-	save_and_cli(flags);
+	local_irq_save(flags);
 #if 0	
 /* Have to sort this out. This cannot be done after initialization. */
 	BTFIXUPSET_CALL(flush_cache_all, flush_cache_all_nop, BTFIXUPCALL_NOP);
@@ -438,7 +430,7 @@ set_debug_traps(void)
 #endif
 
 	initialized = 1; /* connect! */
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 /* Convert the SPARC hardware trap type code to a unix signal number. */

arch/sparc/kernel/tadpole.c

@@ -56,6 +56,9 @@ static void clk_slow(void)
 			     "g2", "g3", "g4", "g5");
 }
 
+/*
+ * Tadpole is guaranteed to be UP, using local_irq_save.
+ */
 static void tsu_clockstop(void)
 {
 	unsigned int mcsr;
@@ -64,28 +67,28 @@ static void tsu_clockstop(void)
 	if (!clk_ctrl)
 		return;
 	if (!(clk_state & CLOCK_INIT_DONE)) {
-		save_and_cli(flags);
+		local_irq_save(flags);
 		clk_init();
 		clk_state |= CLOCK_INIT_DONE;       /* all done */
-		restore_flags(flags);
+		local_irq_restore(flags);
 		return;
 	}
 	if (!(clk_ctrl[2] & 1))
 		return;               /* no speed up yet */
 
-	save_and_cli(flags);
+	local_irq_save(flags);
 
 	/* if SCSI DMA in progress, don't slow clock */
 	mcsr = ldphys(MACIO_SCSI_CSR_ADDR);
 	if ((mcsr&MACIO_EN_DMA) != 0) {
-		restore_flags(flags);
+		local_irq_restore(flags);
 		return;
 	}
 	/* TODO... the minimum clock setting ought to increase the
 	 * memory refresh interval..
 	 */
 	clk_slow();
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 static void swift_clockstop(void)

arch/sparc/kernel/tick14.c

@@ -29,32 +29,30 @@ extern unsigned long lvl14_save[5];
 static unsigned long *linux_lvl14 = NULL;
 static unsigned long obp_lvl14[4];
  
+/*
+ * Call with timer IRQ closed.
+ * First time we do it with disable_irq, later prom code uses spin_lock_irq().
+ */
 void install_linux_ticker(void)
 {
-	unsigned long flags;
 
 	if (!linux_lvl14)
 		return;
-	save_and_cli(flags);
 	linux_lvl14[0] =  lvl14_save[0];
 	linux_lvl14[1] =  lvl14_save[1];
 	linux_lvl14[2] =  lvl14_save[2];
 	linux_lvl14[3] =  lvl14_save[3];
-	restore_flags(flags);
 }
 
 void install_obp_ticker(void)
 {
-	unsigned long flags;
 
 	if (!linux_lvl14)
 		return;
-	save_and_cli(flags);
 	linux_lvl14[0] =  obp_lvl14[0];
 	linux_lvl14[1] =  obp_lvl14[1];
 	linux_lvl14[2] =  obp_lvl14[2];
 	linux_lvl14[3] =  obp_lvl14[3]; 
-	restore_flags(flags);
 }
 
 void claim_ticker14(void (*handler)(int, void *, struct pt_regs *),

arch/sparc/kernel/unaligned.c

@@ -506,9 +506,18 @@ asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn)
 			break;
 
 		case both:
+#if 0 /* unsupported */
 			do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
 				  (unsigned long *) addr,
 				  user_unaligned_trap_fault);
+#else
+			/*
+			 * This was supported in 2.4. However, we question
+			 * the value of SWAP instruction across word boundaries.
+			 */
+			printk("Unaligned SWAP unsupported.\n");
+			goto kill_user;
+#endif
 			break;
 
 		default:

arch/sparc/mm/srmmu.c

@@ -1212,7 +1212,6 @@ extern int linux_num_cpus;
 void (*poke_srmmu)(void) __initdata = NULL;
 
 extern unsigned long bootmem_init(unsigned long *pages_avail);
-extern void sun_serial_setup(void);
 
 void __init srmmu_paging_init(void)
 {
@@ -1281,13 +1280,6 @@ void __init srmmu_paging_init(void)
 	flush_cache_all();
 	flush_tlb_all();
 
-	/*
-	 * This does not logically belong here, but we need to
-	 * call it at the moment we are able to use the bootmem
-	 * allocator.
-	 */
-	sun_serial_setup();
-
 	sparc_context_init(num_contexts);
 
 	kmap_init();

arch/sparc/mm/sun4c.c

@@ -2001,7 +2001,6 @@ extern void sparc_context_init(int);
 extern unsigned long end;
 extern unsigned long bootmem_init(unsigned long *pages_avail);
 extern unsigned long last_valid_pfn;
-extern void sun_serial_setup(void);
 
 void __init sun4c_paging_init(void)
 {
@@ -2018,12 +2017,6 @@ void __init sun4c_paging_init(void)
 	last_valid_pfn = bootmem_init(&pages_avail);
 	end_pfn = last_valid_pfn;
 
-	/* This does not logically belong here, but we need to
-	 * call it at the moment we are able to use the bootmem
-	 * allocator.
-	 */
-	sun_serial_setup();
-
 	sun4c_probe_mmu();
 	invalid_segment = (num_segmaps - 1);
 	sun4c_init_mmu_entry_pool();

arch/sparc/prom/misc.c

@@ -12,6 +12,7 @@
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 #include <asm/auxio.h>
+#include <asm/system.h>
 
 extern void restore_current(void);
 
@@ -47,7 +48,6 @@ prom_feval(char *fstring)
 
 /* We want to do this more nicely some day. */
 extern void (*prom_palette)(int);
-extern int serial_console;
 
 /* Drop into the prom, with the chance to continue with the 'go'
  * prom command.
@@ -55,20 +55,18 @@ extern int serial_console;
 void
 prom_cmdline(void)
 {
-	extern void kernel_enter_debugger(void);
 	extern void install_obp_ticker(void);
 	extern void install_linux_ticker(void);
 	unsigned long flags;
 
-	kernel_enter_debugger();
 	if(!serial_console && prom_palette)
 		prom_palette (1);
-	install_obp_ticker();
 	spin_lock_irqsave(&prom_lock, flags);
+	install_obp_ticker();
 	(*(romvec->pv_abort))();
 	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
 	install_linux_ticker();
+	spin_unlock_irqrestore(&prom_lock, flags);
 #ifdef CONFIG_SUN_AUXIO
 	TURN_ON_LED;
 #endif

arch/sparc64/kernel/power.c

@@ -11,6 +11,7 @@
 #include <linux/signal.h>
 #include <linux/delay.h>
 
+#include <asm/system.h>
 #include <asm/ebus.h>
 
 #define __KERNEL_SYSCALLS__
@@ -37,8 +38,6 @@ extern void machine_halt(void);
 extern void machine_alt_power_off(void);
 static void (*poweroff_method)(void) = machine_alt_power_off;
 
-extern int serial_console;
-
 void machine_power_off(void)
 {
 	if (!serial_console) {

arch/sparc64/kernel/process.c

@@ -110,7 +110,6 @@ int cpu_idle(void)
 extern char reboot_command [];
 
 extern void (*prom_palette)(int);
-extern int serial_console;
 extern void (*prom_keyboard)(void);
 
 void machine_halt(void)

arch/sparc64/kernel/setup.c

@@ -314,12 +314,9 @@ int prom_callback(long *args)
 	return 0;
 }
 
-extern void rs_kgdb_hook(int tty_num); /* sparc/serial.c */
-
 unsigned int boot_flags = 0;
 #define BOOTME_DEBUG  0x1
 #define BOOTME_SINGLE 0x2
-#define BOOTME_KGDB   0x4
 
 static int console_fb __initdata = 0;
 
@@ -389,26 +386,6 @@ static void __init boot_flags_init(char *commands)
 			commands++;
 			while (*commands && *commands != ' ')
 				process_switch(*commands++);
-		} else if (strlen(commands) >= 9
-			   && !strncmp(commands, "kgdb=tty", 8)) {
-			boot_flags |= BOOTME_KGDB;
-			switch (commands[8]) {
-#ifdef CONFIG_SUN_SERIAL
-			case 'a':
-				rs_kgdb_hook(0);
-				prom_printf("KGDB: Using serial line /dev/ttya.\n");
-				break;
-			case 'b':
-				rs_kgdb_hook(1);
-				prom_printf("KGDB: Using serial line /dev/ttyb.\n");
-				break;
-#endif
-			default:
-				printk("KGDB: Unknown tty line.\n");
-				boot_flags &= ~BOOTME_KGDB;
-				break;
-			}
-			commands += 9;
 		} else {
 			if (!strncmp(commands, "console=", 8)) {
 				commands += 8;
@@ -484,7 +461,6 @@ extern void paging_init(void);
 
 void __init setup_arch(char **cmdline_p)
 {
-	extern int serial_console;  /* in console.c, of course */
 	unsigned long highest_paddr;
 	int i;
 
@@ -568,7 +544,6 @@ void __init setup_arch(char **cmdline_p)
 	}
 #endif
 
-#ifdef CONFIG_SUN_SERIAL
 	switch (console_fb) {
 	case 0: /* Let's get our io devices from prom */
 		{
@@ -597,10 +572,7 @@ void __init setup_arch(char **cmdline_p)
 	case 3: /* Force ttyb as console */
 		serial_console = 2;
 		break;
-	}
-#else
-	serial_console = 0;
-#endif
+	};
 	if (serial_console)
 		conswitchp = NULL;
 

arch/sparc64/mm/init.c

@@ -1515,14 +1515,6 @@ void __init paging_init(void)
 	pages_avail = 0;
 	last_valid_pfn = end_pfn = bootmem_init(&pages_avail);
 
-#ifdef CONFIG_SUN_SERIAL
-	/* This does not logically belong here, but we need to
-	 * call it at the moment we are able to use the bootmem
-	 * allocator.
-	 */
-	sun_serial_setup();
-#endif
-
 	/* Inherit non-locked OBP mappings. */
 	inherit_prom_mappings();
 	

arch/sparc64/prom/misc.c

@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <asm/openprom.h>
 #include <asm/oplib.h>
+#include <asm/system.h>
 
 /* Reset and reboot the machine with the command 'bcommand'. */
 void prom_reboot(char *bcommand)
@@ -33,7 +34,6 @@ void prom_feval(char *fstring)
 
 /* We want to do this more nicely some day. */
 extern void (*prom_palette)(int);
-extern int serial_console;
 
 #ifdef CONFIG_SMP
 extern void smp_capture(void);

drivers/serial/sunsu.c

@@ -34,6 +34,7 @@
 #include <linux/serio.h>
 #endif
 #include <linux/init.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1019,6 +1020,8 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up)
 	if (!up->port_node || !up->su_type)
 		return;
 
+	up->port.iotype = SERIAL_IO_MEM;
+
 	/*
 	 * First we look for Ebus-bases su's
 	 */

drivers/serial/sunzilog.c

@@ -382,13 +382,6 @@ static void sunzilog_receive_chars(struct uart_sunzilog_port *up,
 			sun_do_break();
 			return;
 		}
-#ifndef CONFIG_SPARC64
-		/* Look for kgdb 'stop' character.  */
-		if (ZS_IS_KGDB(up) && (ch == '\003')) {
-			breakpoint();
-			return;
-		}
-#endif
 
 		/* A real serial line, record the character and status.  */
 		*tty->flip.char_buf_ptr = ch;
@@ -1152,11 +1145,11 @@ static struct zilog_layout * __init get_zs_sun4u(int chip)
 static struct zilog_layout * __init get_zs_sun4cmd(int chip)
 {
 	struct linux_prom_irqs irq_info[2];
-	unsigned long mapped_addr;
-	int zsnode, chipid, cpunode;
+	unsigned long mapped_addr = 0;
+	int zsnode, chipid, cpunode, bbnode;
 
 	if (sparc_cpu_model == sun4d) {
-		int bbnode, walk, no;
+		int walk, no;
 
 		zsnode = 0;
 		bbnode = 0;
@@ -1249,7 +1242,7 @@ static struct zilog_layout * __init get_zs_sun4cmd(int chip)
 		} else if (zilog_irq != irq_info[0].pri) {
 			prom_printf("SunZilog: Inconsistent IRQ layout for Zilog %d.\n",
 				    chip);
-			promt_halt();
+			prom_halt();
 		}
 		break;
 	}
@@ -1290,7 +1283,7 @@ static struct zilog_layout * __init get_zs(int chip)
 		zilog_irq = 12;
 		res.end = (res.start + (8 - 1));
 		res.flags = IORESOURCE_IO;
-		return sbus_ioremap(&res, 0, 8, "SunZilog");
+		return (struct zilog_layout *) sbus_ioremap(&res, 0, 8, "SunZilog");
 	}
 
 	return get_zs_sun4cmd(chip);
@@ -1649,13 +1642,10 @@ static int __init sunzilog_init(void)
 	/* Sun4 Zilog setup is hard coded, no probing to do.  */
 	if (sparc_cpu_model == sun4) {
 		NUM_SUNZILOG = 2;
-		goto no_probe;
-	}
-
-	node = prom_getchild(prom_root_node);
-	if (sparc_cpu_model == sun4d) {
+	} else if (sparc_cpu_model == sun4d) {
 		int bbnode;
 
+		node = prom_getchild(prom_root_node);
 		NUM_SUNZILOG = 0;
 		while (node &&
 		       (node = prom_searchsiblings(node, "cpu-unit"))) {
@@ -1664,7 +1654,6 @@ static int __init sunzilog_init(void)
 				NUM_SUNZILOG += 2;
 			node = prom_getsibling(node);
 		}
-		goto no_probe;
 	} else if (sparc_cpu_model == sun4u) {
 		int central_node;
 
@@ -1675,26 +1664,27 @@ static int __init sunzilog_init(void)
 		if (central_node != 0 && central_node != -1)
 			node = prom_searchsiblings(prom_getchild(central_node), "fhc");
 		else
-			node = prom_searchsiblings(node, "sbus");
+			node = prom_searchsiblings(prom_getchild(prom_root_node), "sbus");
 		if (node != 0 && node != -1)
 			node = prom_getchild(node);
 		if (node == 0 || node == -1)
 			return -ENODEV;
+
+		node = prom_searchsiblings(node, "zs");
+		if (!node)
+			return -ENODEV;
+		
+		NUM_SUNZILOG = 2;
 	} else {
+		node = prom_getchild(prom_root_node);
 		node = prom_searchsiblings(node, "obio");
 		if (node)
 			node = prom_getchild(node);
-		NUM_SUNZILOG = 2;
-		goto no_probe;
-	}
-
-	node = prom_searchsiblings(node, "zs");
 		if (!node)
 			return -ENODEV;
 
 		NUM_SUNZILOG = 2;
-
-no_probe:
+	}
 
 	sunzilog_alloc_tables();
 

include/asm-sparc/hardirq.h

@@ -121,7 +121,7 @@ do {                                                                    \
 
 #ifndef CONFIG_SMP
 
-#define synchronize_irq()	barrier()
+#define synchronize_irq(irq)	barrier()
 
 #else /* (CONFIG_SMP) */
 

include/asm-sparc/irq.h

@@ -21,6 +21,8 @@ BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int)
 
 #define NR_IRQS    15
 
+#define irq_cannonicalize(irq)	(irq)
+
 /* Dave Redman (djhr@tadpole.co.uk)
  * changed these to function pointers.. it saves cycles and will allow
  * the irq dependencies to be split into different files at a later date

include/asm-sparc/kmap_types.h

@@ -11,6 +11,8 @@ enum km_type {
 	KM_BIO_DST_IRQ,
 	KM_PTE0,
 	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
 	KM_TYPE_NR
 };
 

include/asm-sparc/system.h

@@ -56,6 +56,17 @@ extern unsigned long empty_zero_page;
 extern struct linux_romvec *romvec;
 #define halt() romvec->pv_halt()
 
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static __inline__ int con_is_present(void)
+{
+	return serial_console ? 0 : 1;
+}
+
+extern struct pt_regs *kbd_pt_regs;
+
 /* When a context switch happens we must flush all user windows so that
  * the windows of the current process are flushed onto its stack. This
  * way the windows are all clean for the next process and the stack
@@ -113,6 +124,7 @@ extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
 	"restore; restore; restore; restore; restore; restore; restore"); \
 } while(0)
 #define finish_arch_switch(rq, next)	do{ }while(0)
+#define task_running(rq, p)		((rq)->curr == (p))
 
 	/* Much care has gone into this code, do not touch it.
 	 *
@@ -282,9 +294,6 @@ extern void __global_restore_flags(unsigned long flags);
 
 #define cli() local_irq_disable()
 #define sti() local_irq_enable()
-#define save_flags(x) local_save_flags(x)
-#define restore_flags(x) local_irq_restore(x)
-#define save_and_cli(x) local_irq_save(x)
 
 #endif