rtlwifi: rtl8192ce: Fix LED initialization

Driver rtl8192ce does not initialize the LED correctly.
Signed-off-by: Chaoming Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rtlwifi/base.c

@@ -251,14 +251,16 @@ void rtl_init_rfkill(struct ieee80211_hw *hw)
 	bool blocked;
 	u8 valid = 0;
 
+	/*set init state to on */
+	rtlpriv->rfkill.rfkill_state = 1;
+	wiphy_rfkill_set_hw_state(hw->wiphy, 0);
+
 	radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid);
 
-	/*set init state to that of switch */
-	rtlpriv->rfkill.rfkill_state = radio_state;
+	if (valid) {
 		printk(KERN_INFO "rtlwifi: wireless switch is %s\n",
 				rtlpriv->rfkill.rfkill_state ? "on" : "off");
 
-	if (valid) {
 		rtlpriv->rfkill.rfkill_state = radio_state;
 
 		blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1;

drivers/net/wireless/rtlwifi/pci.c

@@ -1785,6 +1785,7 @@ void rtl_pci_disconnect(struct pci_dev *pdev)
 
 	rtl_pci_deinit(hw);
 	rtl_deinit_core(hw);
+	if (rtlpriv->cfg->ops->deinit_sw_leds)
 		rtlpriv->cfg->ops->deinit_sw_leds(hw);
 	_rtl_pci_io_handler_release(hw);
 	rtlpriv->cfg->ops->deinit_sw_vars(hw);

drivers/net/wireless/rtlwifi/rtl8192ce/led.c

@@ -32,6 +32,14 @@
 #include "reg.h"
 #include "led.h"
 
+static void _rtl92ce_init_led(struct ieee80211_hw *hw,
+			      struct rtl_led *pled, enum rtl_led_pin ledpin)
+{
+	pled->hw = hw;
+	pled->ledpin = ledpin;
+	pled->ledon = false;
+}
+
 void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
 {
 	u8 ledcfg;
@@ -97,10 +105,10 @@ void rtl92ce_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
 
 void rtl92ce_init_sw_leds(struct ieee80211_hw *hw)
 {
-}
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
 
-void rtl92ce_deinit_sw_leds(struct ieee80211_hw *hw)
-{
+	_rtl92ce_init_led(hw, &(pcipriv->ledctl.sw_led0), LED_PIN_LED0);
+	_rtl92ce_init_led(hw, &(pcipriv->ledctl.sw_led1), LED_PIN_LED1);
 }
 
 void _rtl92ce_sw_led_control(struct ieee80211_hw *hw,

drivers/net/wireless/rtlwifi/rtl8192ce/led.h

@@ -31,7 +31,6 @@
 #define __RTL92CE_LED_H__
 
 void rtl92ce_init_sw_leds(struct ieee80211_hw *hw);
-void rtl92ce_deinit_sw_leds(struct ieee80211_hw *hw);
 void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled);
 void rtl92ce_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled);
 void rtl92ce_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction);

drivers/net/wireless/rtlwifi/rtl8192ce/sw.c

@@ -131,7 +131,6 @@ static struct rtl_hal_ops rtl8192ce_hal_ops = {
 	.enable_hw_sec = rtl92ce_enable_hw_security_config,
 	.set_key = rtl92ce_set_key,
 	.init_sw_leds = rtl92ce_init_sw_leds,
-	.deinit_sw_leds = rtl92ce_deinit_sw_leds,
 	.get_bbreg = rtl92c_phy_query_bb_reg,
 	.set_bbreg = rtl92c_phy_set_bb_reg,
 	.get_rfreg = rtl92ce_phy_query_rf_reg,