Skip to content

L
linux
Commit 24a07a12 authored by Roy Huang's avatar Roy Huang Committed by Bryan Wu
Browse files
Options

Blackfin arch: initial supporting for BF548-EZKIT 

The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia
applications where system performance and cost are essential ingredients. The
integration of multimedia, human interface, and connectivity peripherals combined
with increased system bandwidth and on-chip memory provides customers a platform to
design the most demanding applications.

Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers
such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will
be submitted later.

Please enjoy the show.
Signed-off-by: default avatarRoy Huang <roy.huang@analog.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@analog.com>
parent 088eec11
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2763 additions and 2907 deletions
arch/blackfin/Kconfig
View file @ 24a07a12
......@@ -71,6 +71,7 @@ config GENERIC_CALIBRATE_DELAY
config IRQCHIP_DEMUX_GPIO
bool
depends on (BF53x || BF561)
default y
source "init/Kconfig"
......@@ -114,6 +115,26 @@ config BF537
help
BF537 Processor Support.
config BF542
bool "BF542"
help
BF542 Processor Support.
config BF544
bool "BF544"
help
BF544 Processor Support.
config BF548
bool "BF548"
help
BF548 Processor Support.
config BF549
bool "BF549"
help
BF549 Processor Support.
config BF561
bool "BF561"
help
......@@ -125,6 +146,11 @@ choice
prompt "Silicon Rev"
default BF_REV_0_2 if BF537
default BF_REV_0_3 if BF533
default BF_REV_0_0 if BF549
config BF_REV_0_0
bool "0.0"
depends on (BF549)
config BF_REV_0_2
bool "0.2"
......@@ -150,6 +176,16 @@ config BF_REV_NONE
endchoice
config BF53x
bool
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
config BF54x
bool
depends on (BF542 || BF544 || BF548 || BF549)
default y
config BFIN_DUAL_CORE
bool
depends on (BF561)
......@@ -198,6 +234,12 @@ config BFIN537_BLUETECHNIX_CM
help
CM-BF537 support for EVAL- and DEV-Board.
config BFIN548_EZKIT
bool "BF548-EZKIT"
depends on (BF548 || BF549)
help
BFIN548-EZKIT board Support.
config BFIN561_BLUETECHNIX_CM
bool "Bluetechnix CM-BF561"
depends on (BF561)
......@@ -265,6 +307,7 @@ config BFIN_SHARED_FLASH_ENET
source "arch/blackfin/mach-bf533/Kconfig"
source "arch/blackfin/mach-bf561/Kconfig"
source "arch/blackfin/mach-bf537/Kconfig"
source "arch/blackfin/mach-bf548/Kconfig"
menu "Board customizations"
......@@ -543,7 +586,7 @@ source "mm/Kconfig"
config BFIN_DMA_5XX
bool "Enable DMA Support"
depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561 || BF54x)
default y
help
DMA driver for BF5xx.
......@@ -839,7 +882,7 @@ endchoice
endmenu
if (BF537 || BF533)
if (BF537 || BF533 || BF54x)
menu "CPU Frequency scaling"
......
arch/blackfin/Makefile
View file @ 24a07a12
......@@ -24,6 +24,8 @@ machine-$(CONFIG_BF533) := bf533
machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561
MACHINE := $(machine-y)
export MACHINE
......
arch/blackfin/kernel/Makefile
View file @ 24a07a12
......@@ -6,9 +6,10 @@ extra-y := init_task.o vmlinux.lds
obj-y := \
entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
sys_bfin.o time.o traps.o irqchip.o dma-mapping.o bfin_gpio.o \
flat.o
sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o
obj-$(CONFIG_BF53x) += bfin_gpio.o
obj-$(CONFIG_BF561) += bfin_gpio.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o
obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o
arch/blackfin/kernel/bfin_dma_5xx.c
View file @ 24a07a12
......@@ -34,6 +34,7 @@
#include <linux/kernel.h>
#include <linux/param.h>
#include <asm/blackfin.h>
#include <asm/dma.h>
#include <asm/cacheflush.h>
......@@ -45,67 +46,6 @@
***************************************************************************/
static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL];
#if defined (CONFIG_BF561)
static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
(struct dma_register *) DMA1_0_NEXT_DESC_PTR,
(struct dma_register *) DMA1_1_NEXT_DESC_PTR,
(struct dma_register *) DMA1_2_NEXT_DESC_PTR,
(struct dma_register *) DMA1_3_NEXT_DESC_PTR,
(struct dma_register *) DMA1_4_NEXT_DESC_PTR,
(struct dma_register *) DMA1_5_NEXT_DESC_PTR,
(struct dma_register *) DMA1_6_NEXT_DESC_PTR,
(struct dma_register *) DMA1_7_NEXT_DESC_PTR,
(struct dma_register *) DMA1_8_NEXT_DESC_PTR,
(struct dma_register *) DMA1_9_NEXT_DESC_PTR,
(struct dma_register *) DMA1_10_NEXT_DESC_PTR,
(struct dma_register *) DMA1_11_NEXT_DESC_PTR,
(struct dma_register *) DMA2_0_NEXT_DESC_PTR,
(struct dma_register *) DMA2_1_NEXT_DESC_PTR,
(struct dma_register *) DMA2_2_NEXT_DESC_PTR,
(struct dma_register *) DMA2_3_NEXT_DESC_PTR,
(struct dma_register *) DMA2_4_NEXT_DESC_PTR,
(struct dma_register *) DMA2_5_NEXT_DESC_PTR,
(struct dma_register *) DMA2_6_NEXT_DESC_PTR,
(struct dma_register *) DMA2_7_NEXT_DESC_PTR,
(struct dma_register *) DMA2_8_NEXT_DESC_PTR,
(struct dma_register *) DMA2_9_NEXT_DESC_PTR,
(struct dma_register *) DMA2_10_NEXT_DESC_PTR,
(struct dma_register *) DMA2_11_NEXT_DESC_PTR,
(struct dma_register *) MDMA1_D0_NEXT_DESC_PTR,
(struct dma_register *) MDMA1_S0_NEXT_DESC_PTR,
(struct dma_register *) MDMA1_D1_NEXT_DESC_PTR,
(struct dma_register *) MDMA1_S1_NEXT_DESC_PTR,
(struct dma_register *) MDMA2_D0_NEXT_DESC_PTR,
(struct dma_register *) MDMA2_S0_NEXT_DESC_PTR,
(struct dma_register *) MDMA2_D1_NEXT_DESC_PTR,
(struct dma_register *) MDMA2_S1_NEXT_DESC_PTR,
(struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
(struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
(struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
(struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
};
#else
static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
(struct dma_register *) DMA0_NEXT_DESC_PTR,
(struct dma_register *) DMA1_NEXT_DESC_PTR,
(struct dma_register *) DMA2_NEXT_DESC_PTR,
(struct dma_register *) DMA3_NEXT_DESC_PTR,
(struct dma_register *) DMA4_NEXT_DESC_PTR,
(struct dma_register *) DMA5_NEXT_DESC_PTR,
(struct dma_register *) DMA6_NEXT_DESC_PTR,
(struct dma_register *) DMA7_NEXT_DESC_PTR,
#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
(struct dma_register *) DMA8_NEXT_DESC_PTR,
(struct dma_register *) DMA9_NEXT_DESC_PTR,
(struct dma_register *) DMA10_NEXT_DESC_PTR,
(struct dma_register *) DMA11_NEXT_DESC_PTR,
#endif
(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
};
#endif
/*------------------------------------------------------------------------------
* Set the Buffer Clear bit in the Configuration register of specific DMA
......@@ -138,149 +78,6 @@ static int __init blackfin_dma_init(void)
arch_initcall(blackfin_dma_init);
/*
* Form the channel find the irq number for that channel.
*/
#if !defined(CONFIG_BF561)
static int bf533_channel2irq(unsigned int channel)
{
int ret_irq = -1;
switch (channel) {
case CH_PPI:
ret_irq = IRQ_PPI;
break;
#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
case CH_EMAC_RX:
ret_irq = IRQ_MAC_RX;
break;
case CH_EMAC_TX:
ret_irq = IRQ_MAC_TX;
break;
case CH_UART1_RX:
ret_irq = IRQ_UART1_RX;
break;
case CH_UART1_TX:
ret_irq = IRQ_UART1_TX;
break;
#endif
case CH_SPORT0_RX:
ret_irq = IRQ_SPORT0_RX;
break;
case CH_SPORT0_TX:
ret_irq = IRQ_SPORT0_TX;
break;
case CH_SPORT1_RX:
ret_irq = IRQ_SPORT1_RX;
break;
case CH_SPORT1_TX:
ret_irq = IRQ_SPORT1_TX;
break;
case CH_SPI:
ret_irq = IRQ_SPI;
break;
case CH_UART_RX:
ret_irq = IRQ_UART_RX;
break;
case CH_UART_TX:
ret_irq = IRQ_UART_TX;
break;
case CH_MEM_STREAM0_SRC:
case CH_MEM_STREAM0_DEST:
ret_irq = IRQ_MEM_DMA0;
break;
case CH_MEM_STREAM1_SRC:
case CH_MEM_STREAM1_DEST:
ret_irq = IRQ_MEM_DMA1;
break;
}
return ret_irq;
}
# define channel2irq(channel) bf533_channel2irq(channel)
#else
static int bf561_channel2irq(unsigned int channel)
{
int ret_irq = -1;
switch (channel) {
case CH_PPI0:
ret_irq = IRQ_PPI0;
break;
case CH_PPI1:
ret_irq = IRQ_PPI1;
break;
case CH_SPORT0_RX:
ret_irq = IRQ_SPORT0_RX;
break;
case CH_SPORT0_TX:
ret_irq = IRQ_SPORT0_TX;
break;
case CH_SPORT1_RX:
ret_irq = IRQ_SPORT1_RX;
break;
case CH_SPORT1_TX:
ret_irq = IRQ_SPORT1_TX;
break;
case CH_SPI:
ret_irq = IRQ_SPI;
break;
case CH_UART_RX:
ret_irq = IRQ_UART_RX;
break;
case CH_UART_TX:
ret_irq = IRQ_UART_TX;
break;
case CH_MEM_STREAM0_SRC:
case CH_MEM_STREAM0_DEST:
ret_irq = IRQ_MEM_DMA0;
break;
case CH_MEM_STREAM1_SRC:
case CH_MEM_STREAM1_DEST:
ret_irq = IRQ_MEM_DMA1;
break;
case CH_MEM_STREAM2_SRC:
case CH_MEM_STREAM2_DEST:
ret_irq = IRQ_MEM_DMA2;
break;
case CH_MEM_STREAM3_SRC:
case CH_MEM_STREAM3_DEST:
ret_irq = IRQ_MEM_DMA3;
break;
case CH_IMEM_STREAM0_SRC:
case CH_IMEM_STREAM0_DEST:
ret_irq = IRQ_IMEM_DMA0;
break;
case CH_IMEM_STREAM1_SRC:
case CH_IMEM_STREAM1_DEST:
ret_irq = IRQ_IMEM_DMA1;
break;
}
return ret_irq;
}
# define channel2irq(channel) bf561_channel2irq(channel)
#endif
/*------------------------------------------------------------------------------
* Request the specific DMA channel from the system.
*-----------------------------------------------------------------------------*/
......
arch/blackfin/kernel/setup.c
View file @ 24a07a12
......@@ -500,8 +500,9 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i,
cplb_data[i].end,
SIZE_4M,
cplb_data[i].i_conf);
} else {
} else
#endif
{
fill_cplbtab(t,
cplb_data[i].start,
a_start,
......
arch/blackfin/mach-bf533/Makefile
View file @ 24a07a12
......@@ -4,6 +4,6 @@
extra-y := head.o
obj-y := ints-priority.o
obj-y := ints-priority.o dma.o
obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o
arch/blackfin/mach-bf533/dma.c 0 → 100644
View file @ 24a07a12
/*
* File: arch/blackfin/mach-bf533/dma.c
* Based on:
* Author:
*
* Created:
* Description: This file contains the simple DMA Implementation for Blackfin
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <asm/blackfin.h>
#include <asm/dma.h>
struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
(struct dma_register *) DMA0_NEXT_DESC_PTR,
(struct dma_register *) DMA1_NEXT_DESC_PTR,
(struct dma_register *) DMA2_NEXT_DESC_PTR,
(struct dma_register *) DMA3_NEXT_DESC_PTR,
(struct dma_register *) DMA4_NEXT_DESC_PTR,
(struct dma_register *) DMA5_NEXT_DESC_PTR,
(struct dma_register *) DMA6_NEXT_DESC_PTR,
(struct dma_register *) DMA7_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
};
int bf533_channel2irq(unsigned int channel)
{
int ret_irq = -1;
switch (channel) {
case CH_PPI:
ret_irq = IRQ_PPI;
break;
case CH_SPORT0_RX:
ret_irq = IRQ_SPORT0_RX;
break;
case CH_SPORT0_TX:
ret_irq = IRQ_SPORT0_TX;
break;
case CH_SPORT1_RX:
ret_irq = IRQ_SPORT1_RX;
break;
case CH_SPORT1_TX:
ret_irq = IRQ_SPORT1_TX;
break;
case CH_SPI:
ret_irq = IRQ_SPI;
break;
case CH_UART_RX:
ret_irq = IRQ_UART_RX;
break;
case CH_UART_TX:
ret_irq = IRQ_UART_TX;
break;
case CH_MEM_STREAM0_SRC:
case CH_MEM_STREAM0_DEST:
ret_irq = IRQ_MEM_DMA0;
break;
case CH_MEM_STREAM1_SRC:
case CH_MEM_STREAM1_DEST:
ret_irq = IRQ_MEM_DMA1;
break;
}
return ret_irq;
}
arch/blackfin/mach-bf537/Makefile
View file @ 24a07a12
......@@ -4,6 +4,6 @@
extra-y := head.o
obj-y := ints-priority.o
obj-y := ints-priority.o dma.o
obj-$(CONFIG_CPU_FREQ) += cpu.o
arch/blackfin/mach-bf537/dma.c 0 → 100644
View file @ 24a07a12
/*
* File: arch/blackfin/mach-bf537/dma.c
* Based on:
* Author:
*
* Created:
* Description: This file contains the simple DMA Implementation for Blackfin
*
* Modified:
* Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <asm/blackfin.h>
#include <asm/dma.h>
struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
(struct dma_register *) DMA0_NEXT_DESC_PTR,
(struct dma_register *) DMA1_NEXT_DESC_PTR,
(struct dma_register *) DMA2_NEXT_DESC_PTR,
(struct dma_register *) DMA3_NEXT_DESC_PTR,
(struct dma_register *) DMA4_NEXT_DESC_PTR,
(struct dma_register *) DMA5_NEXT_DESC_PTR,
(struct dma_register *) DMA6_NEXT_DESC_PTR,
(struct dma_register *) DMA7_NEXT_DESC_PTR,
(struct dma_register *) DMA8_NEXT_DESC_PTR,
(struct dma_register *) DMA9_NEXT_DESC_PTR,
(struct dma_register *) DMA10_NEXT_DESC_PTR,
(struct dma_register *) DMA11_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
};
int channel2irq(unsigned int channel)
{
int ret_irq = -1;
switch (channel) {
case CH_PPI:
ret_irq = IRQ_PPI;
break;
case CH_EMAC_RX:
ret_irq = IRQ_MAC_RX;
break;
case CH_EMAC_TX:
ret_irq = IRQ_MAC_TX;
break;
case CH_UART1_RX:
ret_irq = IRQ_UART1_RX;
break;
case CH_UART1_TX:
ret_irq = IRQ_UART1_TX;
break;
case CH_SPORT0_RX:
ret_irq = IRQ_SPORT0_RX;
break;
case CH_SPORT0_TX:
ret_irq = IRQ_SPORT0_TX;
break;
case CH_SPORT1_RX:
ret_irq = IRQ_SPORT1_RX;
break;
case CH_SPORT1_TX:
ret_irq = IRQ_SPORT1_TX;
break;
case CH_SPI:
ret_irq = IRQ_SPI;
break;
case CH_UART_RX:
ret_irq = IRQ_UART_RX;
break;
case CH_UART_TX:
ret_irq = IRQ_UART_TX;
break;
case CH_MEM_STREAM0_SRC:
case CH_MEM_STREAM0_DEST:
ret_irq = IRQ_MEM_DMA0;
break;
case CH_MEM_STREAM1_SRC:
case CH_MEM_STREAM1_DEST:
ret_irq = IRQ_MEM_DMA1;
break;
}
return ret_irq;
}
arch/blackfin/mach-bf548/Kconfig 0 → 100644
View file @ 24a07a12
if (BF54x)
menu "BF548 Specific Configuration"
comment "Interrupt Priority Assignment"
menu "Priority"
config IRQ_PLL_WAKEUP
int "IRQ_PLL_WAKEUP"
default 7
config IRQ_DMAC0_ERR
int "IRQ_DMAC0_ERR"
default 7
config IRQ_EPPI0_ERR
int "IRQ_EPPI0_ERR"
default 7
config IRQ_SPORT0_ERR
int "IRQ_SPORT0_ERR"
default 7
config IRQ_SPORT1_ERR
int "IRQ_SPORT1_ERR"
default 7
config IRQ_SPI0_ERR
int "IRQ_SPI0_ERR"
default 7
config IRQ_UART0_ERR
int "IRQ_UART0_ERR"
default 7
config IRQ_RTC
int "IRQ_RTC"
default 8
config IRQ_EPPI0
int "IRQ_EPPI0"
default 8
config IRQ_SPORT0_RX
int "IRQ_SPORT0_RX"
default 9
config IRQ_SPORT0_TX
int "IRQ_SPORT0_TX"
default 9
config IRQ_SPORT1_RX
int "IRQ_SPORT1_RX"
default 9
config IRQ_SPORT1_TX
int "IRQ_SPORT1_TX"
default 9
config IRQ_SPI0
int "IRQ_SPI0"
default 10
config IRQ_UART0_RX
int "IRQ_UART0_RX"
default 10
config IRQ_UART0_TX
int "IRQ_UART0_TX"
default 10
config IRQ_TIMER8
int "IRQ_TIMER8"
default 11
config IRQ_TIMER9
int "IRQ_TIMER9"
default 11
config IRQ_TIMER10
int "IRQ_TIMER10"
default 11
config IRQ_PINT0
int "IRQ_PINT0"
default 12
config IRQ_PINT1
int "IRQ_PINT0"
default 12
config IRQ_MDMAS0
int "IRQ_MDMAS0"
default 13
config IRQ_MDMAS1
int "IRQ_DMDMAS1"
default 13
config IRQ_WATCHDOG
int "IRQ_WATCHDOG"
default 13
config IRQ_DMAC1_ERR
int "IRQ_DMAC1_ERR"
default 7
config IRQ_SPORT2_ERR
int "IRQ_SPORT2_ERR"
default 7
config IRQ_SPORT3_ERR
int "IRQ_SPORT3_ERR"
default 7
config IRQ_MXVR_DATA
int "IRQ MXVR Data"
default 7
config IRQ_SPI1_ERR
int "IRQ_SPI1_ERR"
default 7
config IRQ_SPI2_ERR
int "IRQ_SPI2_ERR"
default 7
config IRQ_UART1_ERR
int "IRQ_UART1_ERR"
default 7
config IRQ_UART2_ERR
int "IRQ_UART2_ERR"
default 7
config IRQ_CAN0_ERR
int "IRQ_CAN0_ERR"
default 7
config IRQ_SPORT2_RX
int "IRQ_SPORT2_RX"
default 9
config IRQ_SPORT2_TX
int "IRQ_SPORT2_TX"
default 9
config IRQ_SPORT3_RX
int "IRQ_SPORT3_RX"
default 9
config IRQ_SPORT3_TX
int "IRQ_SPORT3_TX"
default 9
config IRQ_EPPI1
int "IRQ_EPPI1"
default 9
config IRQ_EPPI2
int "IRQ_EPPI2"
default 9
config IRQ_SPI1
int "IRQ_SPI1"
default 10
config IRQ_SPI2
int "IRQ_SPI2"
default 10
config IRQ_UART1_RX
int "IRQ_UART1_RX"
default 10
config IRQ_UART1_TX
int "IRQ_UART1_TX"
default 10
config IRQ_ATAPI_RX
int "IRQ_ATAPI_RX"
default 10
config IRQ_ATAPI_TX
int "IRQ_ATAPI_TX"
default 10
config IRQ_TWI0
int "IRQ_TWI0"
default 11
config IRQ_TWI1
int "IRQ_TWI1"
default 11
config IRQ_CAN0_RX
int "IRQ_CAN_RX"
default 11
config IRQ_CAN0_TX
int "IRQ_CAN_TX"
default 11
config IRQ_MDMAS2
int "IRQ_MDMAS2"
default 13
config IRQ_MDMAS3
int "IRQ_DMMAS3"
default 13
config IRQ_MXVR_ERR
int "IRQ_MXVR_ERR"
default 11
config IRQ_MXVR_MSG
int "IRQ_MXVR_MSG"
default 11
config IRQ_MXVR_PKT
int "IRQ_MXVR_PKT"
default 11
config IRQ_EPPI1_ERR
int "IRQ_EPPI1_ERR"
default 7
config IRQ_EPPI2_ERR
int "IRQ_EPPI2_ERR"
default 7
config IRQ_UART3_ERR
int "IRQ_UART3_ERR"
default 7
config IRQ_HOST_ERR
int "IRQ_HOST_ERR"
default 7
config IRQ_PIXC_ERR
int "IRQ_PIXC_ERR"
default 7
config IRQ_NFC_ERR
int "IRQ_NFC_ERR"
default 7
config IRQ_ATAPI_ERR
int "IRQ_ATAPI_ERR"
default 7
config IRQ_CAN1_ERR
int "IRQ_CAN1_ERR"
default 7
config IRQ_HS_DMA_ERR
int "IRQ Handshake DMA Status"
default 7
config IRQ_PIXC_IN0
int "IRQ PIXC IN0"
default 8
config IRQ_PIXC_IN1
int "IRQ PIXC IN1"
default 8
config IRQ_PIXC_OUT
int "IRQ PIXC OUT"
default 8
config IRQ_SDH
int "IRQ SDH"
default 8
config IRQ_CNT
int "IRQ CNT"
default 8
config IRQ_KEY
int "IRQ KEY"
default 8
config IRQ_CAN1_RX
int "IRQ CAN1 RX"
default 11
config IRQ_CAN1_TX
int "IRQ_CAN1_TX"
default 11
config IRQ_SDH_MASK0
int "IRQ_SDH_MASK0"
default 11
config IRQ_SDH_MASK1
int "IRQ_SDH_MASK1"
default 11
config IRQ_USB_INT0
int "IRQ USB INT0"
default 11
config IRQ_USB_INT1
int "IRQ USB INT1"
default 11
config IRQ_USB_INT2
int "IRQ USB INT2"
default 11
config IRQ_USB_DMA
int "IRQ USB DMA"
default 11
config IRQ_OTPSEC
int "IRQ OPTSEC"
default 11
config IRQ_TIMER0
int "IRQ_TIMER0"
default 11
config IRQ_TIMER1
int "IRQ_TIMER1"
default 11
config IRQ_TIMER2
int "IRQ_TIMER2"
default 11
config IRQ_TIMER3
int "IRQ_TIMER3"
default 11
config IRQ_TIMER4
int "IRQ_TIMER4"
default 11
config IRQ_TIMER5
int "IRQ_TIMER5"
default 11
config IRQ_TIMER6
int "IRQ_TIMER6"
default 11
config IRQ_TIMER7
int "IRQ_TIMER7"
default 11
config IRQ_PINT2
int "IRQ_PIN2"
default 11
config IRQ_PINT3
int "IRQ_PIN3"
default 11
help
Enter the priority numbers between 7-13 ONLY. Others are Reserved.
This applies to all the above. It is not recommended to assign the
highest priority number 7 to UART or any other device.
endmenu
endmenu
endif
arch/blackfin/mach-bf548/Makefile 0 → 100644
View file @ 24a07a12
#
# arch/blackfin/mach-bf537/Makefile
#
extra-y := head.o
obj-y := ints-priority.o dma.o gpio.o
obj-$(CONFIG_CPU_FREQ) += cpu.o
arch/blackfin/mach-bf548/boards/Makefile 0 → 100644
View file @ 24a07a12
#
# arch/blackfin/mach-bf548/boards/Makefile
#
obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
arch/blackfin/mach-bf548/boards/ezkit.c 0 → 100644
View file @ 24a07a12
/*
* File: arch/blackfin/mach-bf548/boards/ezkit.c
* Based on: arch/blackfin/mach-bf537/boards/ezkit.c
* Author: Aidan Williams <aidan@nicta.com.au>
*
* Created:
* Description:
*
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <asm/irq.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/bfin5xx_spi.h>
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "ADSP-BF548-EZKIT";
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
{
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
{
.start = 0xFFC02100,
.end = 0xFFC021FF,
.flags = IORESOURCE_MEM,
},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
{
.start = 0xFFC03100,
.end = 0xFFC031FF,
},
#endif
};
static struct platform_device bfin_uart_device = {
.name = "bfin-uart",
.id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources),
.resource = bfin_uart_resources,
};
#endif
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
};
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
return 0;
}
arch_initcall(stamp_init);
arch/blackfin/mach-bf548/boards/led.S 0 → 100644
View file @ 24a07a12
/****************************************************
* LED1 ---- PG6 LED2 ---- PG7 *
* LED3 ---- PG8 LED4 ---- PG9 *
* LED5 ---- PG10 LED6 ---- PG11 *
****************************************************/
#include <linux/linkage.h>
#include <asm/blackfin.h>
/* All functions in this file save the registers they uses.
So there is no need to save any registers before calling them. */
.text;
/* Initialize LEDs. */
ENTRY(_led_init)
LINK 0;
[--SP] = P0;
[--SP] = R0;
[--SP] = R1;
[--SP] = R2;
R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
R2 = ~R1;
P0.H = hi(PORTG_FER);
P0.L = lo(PORTG_FER);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
P0.H = hi(PORTG_DIR_SET);
P0.L = lo(PORTG_DIR_SET);
W[P0] = R1.L;
SSYNC;
P0.H = hi(PORTG_INEN);
P0.L = lo(PORTG_INEN);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
R0 = [SP++];
P0 = [SP++];
RTS;
.size _led_init, .-_led_init
/* Set one LED on. Leave other LEDs unchanged.
It expects the LED number passed through R0. */
ENTRY(_led_on)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG_SET);
P0.L = lo(PORTG_SET);
W[P0] = R1.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_on, .-_led_on
/* Set one LED off. Leave other LEDs unchanged. */
ENTRY(_led_off)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG_CLEAR);
P0.L = lo(PORTG_CLEAR);
W[P0] = R1.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_off, .-_led_off
/* Toggle one LED. Leave other LEDs unchanged. */
ENTRY(_led_toggle)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R0 = W[P0](Z);
SSYNC;
R0 = R0 ^ R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle, .-_led_toggle
/* Display the number using LEDs in binary format. */
ENTRY(_led_disp_num)
LINK 0;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R2 = 6(X);
R0 <<= R2;
R1 <<= R2;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R2 = W[P0](Z);
SSYNC;
R1 = ~R1;
R2 = R2 & R1;
R2 = R2 | R0;
W[P0] = R2.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_disp_num, .-_led_disp_num
/* Toggle the number using LEDs in binary format. */
ENTRY(_led_toggle_num)
LINK 0;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R1 = 6(X);
R0 <<= R1;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R1 = W[P0](Z);
SSYNC;
R1 = R1 ^ R0;
W[P0] = R1.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle_num, .-_led_toggle_num
arch/blackfin/mach-bf548/cpu.c 0 → 100644
View file @ 24a07a12
/*
* File: arch/blackfin/mach-bf548/cpu.c
* Based on:
* Author:
*
* Created:
* Description: clock scaling for the bf54x
*
* Modified:
* Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <asm/dpmc.h>
#include <linux/fs.h>
#include <asm/bfin-global.h>
/* CONFIG_CLKIN_HZ=25000000 */
#define VCO5 (CONFIG_CLKIN_HZ*45)
#define VCO4 (CONFIG_CLKIN_HZ*36)
#define VCO3 (CONFIG_CLKIN_HZ*27)
#define VCO2 (CONFIG_CLKIN_HZ*18)
#define VCO1 (CONFIG_CLKIN_HZ*9)
#define VCO(x) VCO##x
#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)}
/* frequency */
static struct cpufreq_frequency_table bf548_freq_table[] = {
MFREQ(1),
MFREQ(3),
{VCO4, VCO4 / 2}, {VCO4, VCO4},
MFREQ(5),
{0, CPUFREQ_TABLE_END},
};
/*
* dpmc_fops->ioctl()
* static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
*/
static int bf548_getfreq(unsigned int cpu)
{
unsigned long cclk_mhz;
/* The driver only support single cpu */
if (cpu == 0)
dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz);
else
cclk_mhz = -1;
return cclk_mhz;
}
static int bf548_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
unsigned long cclk_mhz;
unsigned long vco_mhz;
unsigned long flags;
unsigned int index;
struct cpufreq_freqs freqs;
if (cpufreq_frequency_table_target(policy, bf548_freq_table, target_freq, relation, &index))
return -EINVAL;
cclk_mhz = bf548_freq_table[index].frequency;
vco_mhz = bf548_freq_table[index].index;
dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz);
freqs.old = bf548_getfreq(0);
freqs.new = cclk_mhz;
freqs.cpu = 0;
pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
cclk_mhz, vco_mhz, index, target_freq, freqs.old);
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
local_irq_save(flags);
dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz);
local_irq_restore(flags);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
vco_mhz = get_vco();
cclk_mhz = get_cclk();
return 0;
}
/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
* this platform, anyway.
*/
static int bf548_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, &bf548_freq_table);
}
static int __init __bf548_cpu_init(struct cpufreq_policy *policy)
{
if (policy->cpu != 0)
return -EINVAL;
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
/*Now ,only support one cpu */
policy->cur = bf548_getfreq(0);
cpufreq_frequency_table_get_attr(bf548_freq_table, policy->cpu);
return cpufreq_frequency_table_cpuinfo(policy, bf548_freq_table);
}
static struct freq_attr *bf548_freq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver bf548_driver = {
.verify = bf548_verify_speed,
.target = bf548_target,
.get = bf548_getfreq,
.init = __bf548_cpu_init,
.name = "bf548",
.owner = THIS_MODULE,
.attr = bf548_freq_attr,
};
static int __init bf548_cpu_init(void)
{
return cpufreq_register_driver(&bf548_driver);
}
static void __exit bf548_cpu_exit(void)
{
cpufreq_unregister_driver(&bf548_driver);
}
MODULE_AUTHOR("Mickael Kang");
MODULE_DESCRIPTION("cpufreq driver for BF548 CPU");
MODULE_LICENSE("GPL");
module_init(bf548_cpu_init);
module_exit(bf548_cpu_exit);
arch/blackfin/mach-bf548/dma.c 0 → 100644
View file @ 24a07a12
/*
* File: arch/blackfin/mach-bf561/dma.c
* Based on:
* Author:
*
* Created:
* Description: This file contains the simple DMA Implementation for Blackfin
*
* Modified:
* Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <asm/blackfin.h>
#include <asm/dma.h>
struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
(struct dma_register *) DMA0_NEXT_DESC_PTR,
(struct dma_register *) DMA1_NEXT_DESC_PTR,
(struct dma_register *) DMA2_NEXT_DESC_PTR,
(struct dma_register *) DMA3_NEXT_DESC_PTR,
(struct dma_register *) DMA4_NEXT_DESC_PTR,
(struct dma_register *) DMA5_NEXT_DESC_PTR,
(struct dma_register *) DMA6_NEXT_DESC_PTR,
(struct dma_register *) DMA7_NEXT_DESC_PTR,
(struct dma_register *) DMA8_NEXT_DESC_PTR,
(struct dma_register *) DMA9_NEXT_DESC_PTR,
(struct dma_register *) DMA10_NEXT_DESC_PTR,
(struct dma_register *) DMA11_NEXT_DESC_PTR,
(struct dma_register *) DMA12_NEXT_DESC_PTR,
(struct dma_register *) DMA13_NEXT_DESC_PTR,
(struct dma_register *) DMA14_NEXT_DESC_PTR,
(struct dma_register *) DMA15_NEXT_DESC_PTR,
(struct dma_register *) DMA16_NEXT_DESC_PTR,
(struct dma_register *) DMA17_NEXT_DESC_PTR,
(struct dma_register *) DMA18_NEXT_DESC_PTR,
(struct dma_register *) DMA19_NEXT_DESC_PTR,
(struct dma_register *) DMA20_NEXT_DESC_PTR,
(struct dma_register *) DMA21_NEXT_DESC_PTR,
(struct dma_register *) DMA22_NEXT_DESC_PTR,
(struct dma_register *) DMA23_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D2_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S2_NEXT_DESC_PTR,
(struct dma_register *) MDMA_D3_NEXT_DESC_PTR,
(struct dma_register *) MDMA_S3_NEXT_DESC_PTR,
};
int channel2irq(unsigned int channel)
{
int ret_irq = -1;
switch (channel) {
case CH_SPORT0_RX:
ret_irq = IRQ_SPORT0_RX;
break;
case CH_SPORT0_TX:
ret_irq = IRQ_SPORT0_TX;
break;
case CH_SPORT1_RX:
ret_irq = IRQ_SPORT1_RX;
break;
case CH_SPORT1_TX:
ret_irq = IRQ_SPORT1_TX;
case CH_SPI0:
ret_irq = IRQ_SPI0;
break;
case CH_SPI1:
ret_irq = IRQ_SPI1;
break;
case CH_UART0_RX:
ret_irq = IRQ_UART_RX;
break;
case CH_UART0_TX:
ret_irq = IRQ_UART_TX;
break;
case CH_UART1_RX:
ret_irq = IRQ_UART_RX;
break;
case CH_UART1_TX:
ret_irq = IRQ_UART_TX;
break;
case CH_EPPI0:
ret_irq = IRQ_EPPI0;
break;
case CH_EPPI1:
ret_irq = IRQ_EPPI1;
break;
case CH_EPPI2:
ret_irq = IRQ_EPPI2;
break;
case CH_PIXC_IMAGE:
ret_irq = IRQ_PIXC_IN0;
break;
case CH_PIXC_OVERLAY:
ret_irq = IRQ_PIXC_IN1;
break;
case CH_PIXC_OUTPUT:
ret_irq = IRQ_PIXC_OUT;
break;
case CH_SPORT2_RX:
ret_irq = IRQ_SPORT2_RX;
break;
case CH_SPORT2_TX:
ret_irq = IRQ_SPORT2_TX;
break;
case CH_SPORT3_RX:
ret_irq = IRQ_SPORT3_RX;
break;
case CH_SPORT3_TX:
ret_irq = IRQ_SPORT3_TX;
break;
case CH_SDH:
ret_irq = IRQ_SDH;
break;
case CH_SPI2:
ret_irq = IRQ_SPI2;
break;
case CH_MEM_STREAM0_SRC:
case CH_MEM_STREAM0_DEST:
ret_irq = IRQ_MDMAS0;
break;
case CH_MEM_STREAM1_SRC:
case CH_MEM_STREAM1_DEST:
ret_irq = IRQ_MDMAS1;
break;
case CH_MEM_STREAM2_SRC:
case CH_MEM_STREAM2_DEST:
ret_irq = IRQ_MDMAS2;
break;
case CH_MEM_STREAM3_SRC:
case CH_MEM_STREAM3_DEST:
ret_irq = IRQ_MDMAS3;
break;
}
return ret_irq;
}
arch/blackfin/mach-bf548/gpio.c 0 → 100644
View file @ 24a07a12
/*
* File: arch/blackfin/mach-bf548/gpio.c
* Based on:
* Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
*
* Created:
* Description: GPIO Abstraction Layer
*
* Modified:
* Copyright 2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/err.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
#include <linux/irq.h>
static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
(struct gpio_port_t *) PORTA_FER,
(struct gpio_port_t *) PORTB_FER,
(struct gpio_port_t *) PORTC_FER,
(struct gpio_port_t *) PORTD_FER,
(struct gpio_port_t *) PORTE_FER,
(struct gpio_port_t *) PORTF_FER,
(struct gpio_port_t *) PORTG_FER,
(struct gpio_port_t *) PORTH_FER,
(struct gpio_port_t *) PORTI_FER,
(struct gpio_port_t *) PORTJ_FER,
};
static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
inline int check_gpio(unsigned short gpio)
{
if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 \
|| gpio == GPIO_PH14 || gpio == GPIO_PH15 \
|| gpio > MAX_BLACKFIN_GPIOS)
return -EINVAL;
return 0;
}
static void port_setup(unsigned short gpio, unsigned short usage)
{
if (usage == GPIO_USAGE) {
if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio))
printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
"usage and GPIO %d detected!\n", gpio);
gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
} else
gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
SSYNC();
}
static int __init bfin_gpio_init(void)
{
int i;
printk(KERN_INFO "Blackfin GPIO Controller\n");
for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE)
reserved_map[gpio_bank(i)] = 0;
return 0;
}
arch_initcall(bfin_gpio_init);
/***********************************************************
*
* FUNCTIONS: Blackfin GPIO Driver
*
* INPUTS/OUTPUTS:
* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
*
*
* DESCRIPTION: Blackfin GPIO Driver API
*
* CAUTION:
*************************************************************
* MODIFICATION HISTORY :
**************************************************************/
int gpio_request(unsigned short gpio, const char *label)
{
unsigned long flags;
if (check_gpio(gpio) < 0)
return -EINVAL;
local_irq_save(flags);
if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
local_irq_restore(flags);
port_setup(gpio, GPIO_USAGE);
return 0;
}
EXPORT_SYMBOL(gpio_request);
void gpio_free(unsigned short gpio)
{
unsigned long flags;
if (check_gpio(gpio) < 0)
return;
local_irq_save(flags);
if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
return;
}
reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_free);
void gpio_direction_input(unsigned short gpio)
{
unsigned long flags;
BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_direction_input);
void gpio_direction_output(unsigned short gpio)
{
unsigned long flags;
BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_direction_output);
arch/blackfin/mach-bf548/head.S 0 → 100644
View file @ 24a07a12
This diff is collapsed.
arch/blackfin/mach-bf548/ints-priority.c 0 → 100644
View file @ 24a07a12
/*
* File: arch/blackfin/mach-bf537/ints-priority.c
* Based on: arch/blackfin/mach-bf533/ints-priority.c
* Author: Michael Hennerich
*
* Created:
* Description: Set up the interupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/module.h>
#include <asm/blackfin.h>
#include <asm/irq.h>
void program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
((CONFIG_IRQ_DMAC0_ERR - 7) << IRQ_DMAC0_ERR_POS) |
((CONFIG_IRQ_EPPI0_ERR - 7) << IRQ_EPPI0_ERR_POS) |
((CONFIG_IRQ_SPORT0_ERR - 7) << IRQ_SPORT0_ERR_POS) |
((CONFIG_IRQ_SPORT1_ERR - 7) << IRQ_SPORT1_ERR_POS) |
((CONFIG_IRQ_SPI0_ERR - 7) << IRQ_SPI0_ERR_POS) |
((CONFIG_IRQ_UART0_ERR - 7) << IRQ_UART0_ERR_POS) |
((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS));
bfin_write_SIC_IAR1(((CONFIG_IRQ_EPPI0 - 7) << IRQ_EPPI0_POS) |
((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) |
((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
bfin_write_SIC_IAR2(((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) |
((CONFIG_IRQ_PINT0 - 7) << IRQ_PINT0_POS) |
((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) |
((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) |
((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) |
((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS));
bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) |
((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) |
((CONFIG_IRQ_SPORT3_ERR - 7) << IRQ_SPORT3_ERR_POS) |
((CONFIG_IRQ_MXVR_DATA - 7) << IRQ_MXVR_DATA_POS) |
((CONFIG_IRQ_SPI1_ERR - 7) << IRQ_SPI1_ERR_POS) |
((CONFIG_IRQ_SPI2_ERR - 7) << IRQ_SPI2_ERR_POS) |
((CONFIG_IRQ_UART1_ERR - 7) << IRQ_UART1_ERR_POS) |
((CONFIG_IRQ_UART2_ERR - 7) << IRQ_UART2_ERR_POS));
bfin_write_SIC_IAR4(((CONFIG_IRQ_CAN0_ERR - 7) << IRQ_CAN0_ERR_POS) |
((CONFIG_IRQ_SPORT2_RX - 7) << IRQ_SPORT2_RX_POS) |
((CONFIG_IRQ_SPORT2_TX - 7) << IRQ_SPORT2_TX_POS) |
((CONFIG_IRQ_SPORT3_RX - 7) << IRQ_SPORT3_RX_POS) |
((CONFIG_IRQ_SPORT3_TX - 7) << IRQ_SPORT3_TX_POS) |
((CONFIG_IRQ_EPPI1 - 7) << IRQ_EPPI1_POS) |
((CONFIG_IRQ_EPPI2 - 7) << IRQ_EPPI2_POS) |
((CONFIG_IRQ_SPI1 - 7) << IRQ_SPI1_POS));
bfin_write_SIC_IAR5(((CONFIG_IRQ_SPI2 - 7) << IRQ_SPI2_POS) |
((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
((CONFIG_IRQ_ATAPI_RX - 7) << IRQ_ATAPI_RX_POS) |
((CONFIG_IRQ_ATAPI_TX - 7) << IRQ_ATAPI_TX_POS) |
((CONFIG_IRQ_TWI0 - 7) << IRQ_TWI0_POS) |
((CONFIG_IRQ_TWI1 - 7) << IRQ_TWI1_POS) |
((CONFIG_IRQ_CAN0_RX - 7) << IRQ_CAN0_RX_POS));
bfin_write_SIC_IAR6(((CONFIG_IRQ_CAN0_TX - 7) << IRQ_CAN0_TX_POS) |
((CONFIG_IRQ_MDMAS2 - 7) << IRQ_MDMAS2_POS) |
((CONFIG_IRQ_MDMAS3 - 7) << IRQ_MDMAS3_POS) |
((CONFIG_IRQ_MXVR_ERR - 7) << IRQ_MXVR_ERR_POS) |
((CONFIG_IRQ_MXVR_MSG - 7) << IRQ_MXVR_MSG_POS) |
((CONFIG_IRQ_MXVR_PKT - 7) << IRQ_MXVR_PKT_POS) |
((CONFIG_IRQ_EPPI1_ERR - 7) << IRQ_EPPI1_ERR_POS) |
((CONFIG_IRQ_EPPI2_ERR - 7) << IRQ_EPPI2_ERR_POS));
bfin_write_SIC_IAR7(((CONFIG_IRQ_UART3_ERR - 7) << IRQ_UART3_ERR_POS) |
((CONFIG_IRQ_HOST_ERR - 7) << IRQ_HOST_ERR_POS) |
((CONFIG_IRQ_PIXC_ERR - 7) << IRQ_PIXC_ERR_POS) |
((CONFIG_IRQ_NFC_ERR - 7) << IRQ_NFC_ERR_POS) |
((CONFIG_IRQ_ATAPI_ERR - 7) << IRQ_ATAPI_ERR_POS) |
((CONFIG_IRQ_CAN1_ERR - 7) << IRQ_CAN1_ERR_POS) |
((CONFIG_IRQ_HS_DMA_ERR - 7) << IRQ_HS_DMA_ERR_POS));
bfin_write_SIC_IAR8(((CONFIG_IRQ_PIXC_IN0 - 7) << IRQ_PIXC_IN1_POS) |
((CONFIG_IRQ_PIXC_IN1 - 7) << IRQ_PIXC_IN1_POS) |
((CONFIG_IRQ_PIXC_OUT - 7) << IRQ_PIXC_OUT_POS) |
((CONFIG_IRQ_SDH - 7) << IRQ_SDH_POS) |
((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) |
((CONFIG_IRQ_KEY - 7) << IRQ_KEY_POS) |
((CONFIG_IRQ_CAN1_RX - 7) << IRQ_CAN1_RX_POS) |
((CONFIG_IRQ_CAN1_TX - 7) << IRQ_CAN1_TX_POS));
bfin_write_SIC_IAR9(((CONFIG_IRQ_SDH_MASK0 - 7) << IRQ_SDH_MASK0_POS) |
((CONFIG_IRQ_SDH_MASK1 - 7) << IRQ_SDH_MASK1_POS) |
((CONFIG_IRQ_USB_INT0 - 7) << IRQ_USB_INT0_POS) |
((CONFIG_IRQ_USB_INT1 - 7) << IRQ_USB_INT1_POS) |
((CONFIG_IRQ_USB_INT2 - 7) << IRQ_USB_INT2_POS) |
((CONFIG_IRQ_USB_DMA - 7) << IRQ_USB_DMA_POS) |
((CONFIG_IRQ_OTPSEC - 7) << IRQ_OTPSEC_POS));
bfin_write_SIC_IAR10(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS));
bfin_write_SIC_IAR11(((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) |
((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
((CONFIG_IRQ_PINT2 - 7) << IRQ_PINT2_POS) |
((CONFIG_IRQ_PINT3 - 7) << IRQ_PINT3_POS));
SSYNC();
}
arch/blackfin/mach-bf561/Makefile
View file @ 24a07a12
......@@ -4,6 +4,6 @@
extra-y := head.o
obj-y := ints-priority.o
obj-y := ints-priority.o dma.o
obj-$(CONFIG_BF561_COREB) += coreb.o
arch/blackfin/mach-bf561/dma.c 0 → 100644
View file @ 24a07a12
/*
* File: arch/blackfin/mach-bf561/dma.c
* Based on:
* Author:
*
* Created:
* Description: This file contains the simple DMA Implementation for Blackfin
*
* Modified:
* Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <asm/blackfin.h>
#include <asm/dma.h>
struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
(struct dma_register *) DMA1_0_NEXT_DESC_PTR,
(struct dma_register *) DMA1_1_NEXT_DESC_PTR,
(struct dma_register *) DMA1_2_NEXT_DESC_PTR,
(struct dma_register *) DMA1_3_NEXT_DESC_PTR,
(struct dma_register *) DMA1_4_NEXT_DESC_PTR,
(struct dma_register *) DMA1_5_NEXT_DESC_PTR,
(struct dma_register *) DMA1_6_NEXT_DESC_PTR,
(struct dma_register *) DMA1_7_NEXT_DESC_PTR,
(struct dma_register *) DMA1_8_NEXT_DESC_PTR,
(struct dma_register *) DMA1_9_NEXT_DESC_PTR,
(struct dma_register *) DMA1_10_NEXT_DESC_PTR,
(struct dma_register *) DMA1_11_NEXT_DESC_PTR,
(struct dma_register *) DMA2_0_NEXT_DESC_PTR,
(struct dma_register *) DMA2_1_NEXT_DESC_PTR,
(struct dma_register *) DMA2_2_NEXT_DESC_PTR,
(struct dma_register *) DMA2_3_NEXT_DESC_PTR,
(struct dma_register *) DMA2_4_NEXT_DESC_PTR,
(struct dma_register *) DMA2_5_NEXT_DESC_PTR,
(struct dma_register *) DMA2_6_NEXT_DESC_PTR,
(struct dma_register *) DMA2_7_NEXT_DESC_PTR,
(struct dma_register *) DMA2_8_NEXT_DESC_PTR,
(struct dma_register *) DMA2_9_NEXT_DESC_PTR,
(struct dma_register *) DMA2_10_NEXT_DESC_PTR,
(struct dma_register *) DMA2_11_NEXT_DESC_PTR,
(struct dma_register *) MDMA1_D0_NEXT_DESC_PTR,
(struct dma_register *) MDMA1_S0_NEXT_DESC_PTR,
(struct dma_register *) MDMA1_D1_NEXT_DESC_PTR,
(struct dma_register *) MDMA1_S1_NEXT_DESC_PTR,
(struct dma_register *) MDMA2_D0_NEXT_DESC_PTR,
(struct dma_register *) MDMA2_S0_NEXT_DESC_PTR,
(struct dma_register *) MDMA2_D1_NEXT_DESC_PTR,
(struct dma_register *) MDMA2_S1_NEXT_DESC_PTR,
(struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
(struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
(struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
(struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
};
int channel2irq(unsigned int channel)
{
int ret_irq = -1;
switch (channel) {
case CH_PPI0:
ret_irq = IRQ_PPI0;
break;
case CH_PPI1:
ret_irq = IRQ_PPI1;
break;
case CH_SPORT0_RX:
ret_irq = IRQ_SPORT0_RX;
break;
case CH_SPORT0_TX:
ret_irq = IRQ_SPORT0_TX;
break;
case CH_SPORT1_RX:
ret_irq = IRQ_SPORT1_RX;
break;
case CH_SPORT1_TX:
ret_irq = IRQ_SPORT1_TX;
break;
case CH_SPI:
ret_irq = IRQ_SPI;
break;
case CH_UART_RX:
ret_irq = IRQ_UART_RX;
break;
case CH_UART_TX:
ret_irq = IRQ_UART_TX;
break;
case CH_MEM_STREAM0_SRC:
case CH_MEM_STREAM0_DEST:
ret_irq = IRQ_MEM_DMA0;
break;
case CH_MEM_STREAM1_SRC:
case CH_MEM_STREAM1_DEST:
ret_irq = IRQ_MEM_DMA1;
break;
case CH_MEM_STREAM2_SRC:
case CH_MEM_STREAM2_DEST:
ret_irq = IRQ_MEM_DMA2;
break;
case CH_MEM_STREAM3_SRC:
case CH_MEM_STREAM3_DEST:
ret_irq = IRQ_MEM_DMA3;
break;
case CH_IMEM_STREAM0_SRC:
case CH_IMEM_STREAM0_DEST:
ret_irq = IRQ_IMEM_DMA0;
break;
case CH_IMEM_STREAM1_SRC:
case CH_IMEM_STREAM1_DEST:
ret_irq = IRQ_IMEM_DMA1;
break;
}
return ret_irq;
}
arch/blackfin/mach-common/Makefile
View file @ 24a07a12
......@@ -4,9 +4,9 @@
obj-y := \
cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \
interrupt.o lock.o dpmc.o irqpanic.o
interrupt.o lock.o irqpanic.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o
obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += pm.o dpmc.o
arch/blackfin/mach-common/ints-priority-sc.c
View file @ 24a07a12
......@@ -13,7 +13,7 @@
* 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
* 2003 Metrowerks/Motorola
* 2003 Bas Vermeulen <bas@buyways.nl>
* Copyright 2004-2006 Analog Devices Inc.
* Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
......@@ -65,9 +65,9 @@ atomic_t num_spurious;
struct ivgx {
/* irq number for request_irq, available in mach-bf533/irq.h */
int irqno;
unsigned int irqno;
/* corresponding bit in the SIC_ISR register */
int isrflag;
unsigned int isrflag;
} ivg_table[NR_PERI_INTS];
struct ivg_slice {
......@@ -98,7 +98,7 @@ static void __init search_IAR(void)
bfin_read32((unsigned long *) SIC_IAR0 +
(irqn >> 3)) >> iar_shift)) {
ivg_table[irq_pos].irqno = IVG7 + irqn;
ivg_table[irq_pos].isrflag = 1 << irqn;
ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
ivg7_13[ivg].istop++;
irq_pos++;
}
......@@ -141,15 +141,31 @@ static void bfin_core_unmask_irq(unsigned int irq)
static void bfin_internal_mask_irq(unsigned int irq)
{
#ifndef CONFIG_BF54x
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
~(1 << (irq - (IRQ_CORETMR + 1))));
#else
unsigned mask_bank, mask_bit;
mask_bank = (irq - (IRQ_CORETMR +1))/32;
mask_bit = (irq - (IRQ_CORETMR + 1))%32;
bfin_write_SIC_IMASK( mask_bank, bfin_read_SIC_IMASK(mask_bank) & \
~(1 << mask_bit));
#endif
SSYNC();
}
static void bfin_internal_unmask_irq(unsigned int irq)
{
#ifndef CONFIG_BF54x
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
(1 << (irq - (IRQ_CORETMR + 1))));
#else
unsigned mask_bank, mask_bit;
mask_bank = (irq - (IRQ_CORETMR +1))/32;
mask_bit = (irq - (IRQ_CORETMR + 1))%32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | \
( 1 << mask_bit));
#endif
SSYNC();
}
......@@ -452,7 +468,14 @@ int __init init_arch_irq(void)
int irq;
unsigned long ilat = 0;
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
#ifdef CONFIG_BF54x
bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
#else
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
#endif
SSYNC();
local_irq_disable();
......@@ -555,8 +578,24 @@ void do_irq(int vec, struct pt_regs *fp)
} else {
struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
unsigned long sic_status;
#ifdef CONFIG_BF54x
unsigned long sic_status[3];
SSYNC();
sic_status[0] = bfin_read_SIC_ISR(0) & bfin_read_SIC_IMASK(0);
sic_status[1] = bfin_read_SIC_ISR(1) & bfin_read_SIC_IMASK(1);
sic_status[2] = bfin_read_SIC_ISR(2) & bfin_read_SIC_IMASK(2);
SSYNC();
for(;; ivg++) {
if (ivg >= ivg_stop) {
atomic_inc(&num_spurious);
return;
}
if (sic_status[(ivg->irqno - IVG7)/32] & ivg->isrflag)
break;
}
#else
unsigned long sic_status;
SSYNC();
sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
......@@ -567,6 +606,7 @@ void do_irq(int vec, struct pt_regs *fp)
} else if (sic_status & ivg->isrflag)
break;
}
#endif
vec = ivg->irqno;
}
asm_do_IRQ(vec, fp);
......
include/asm-blackfin/gpio.h
View file @ 24a07a12
......@@ -204,6 +204,10 @@
#endif
#ifdef BF548_FAMILY
#include <asm-blackfin/mach-bf548/gpio.h>
#endif
#ifdef BF561_FAMILY
#define MAX_BLACKFIN_GPIOS 48
#define PORT_FIO0 GPIO_0
......@@ -264,6 +268,7 @@ unsigned short get_gpiop_maska(unsigned short);
unsigned short get_gpiop_maskb(unsigned short);
unsigned short get_gpiop_data(unsigned short);
#ifndef BF548_FAMILY
struct gpio_port_t {
unsigned short data;
unsigned short dummy1;
......@@ -299,6 +304,7 @@ struct gpio_port_t {
unsigned short dummy16;
unsigned short inen;
};
#endif
#ifdef CONFIG_PM
#define PM_WAKE_RISING 0x1
......
include/asm-blackfin/mach-bf533/dma.h
View file @ 24a07a12
......@@ -51,4 +51,7 @@
#define CH_MEM_STREAM1_DEST 10 /* TX */
#define CH_MEM_STREAM1_SRC 11 /* RX */
extern int channel2irq(unsigned int channel);
extern struct dma_register *base_addr[];
#endif
include/asm-blackfin/mach-bf537/dma.h
View file @ 24a07a12
......@@ -52,4 +52,7 @@
#define CH_MEM_STREAM1_DEST 14 /* TX */
#define CH_MEM_STREAM1_SRC 15 /* RX */
extern int channel2irq(unsigned int channel);
extern struct dma_register *base_addr[];
#endif
include/asm-blackfin/mach-bf548/anomaly.h
View file @ 24a07a12
......@@ -47,6 +47,8 @@
SPORT external receive and transmit clocks. */
#define ANOMALY_05000272 /* Certain data cache write through modes fail for
VDDint <=0.9V */
#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
not restored */
#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
Boundary of Reserved Memory */
#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
......
include/asm-blackfin/mach-bf548/bf548.h
View file @ 24a07a12
......@@ -30,6 +30,8 @@
#ifndef __MACH_BF548_H__
#define __MACH_BF548_H__
#define SUPPORTED_REVID 0
/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */
......
include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
View file @ 24a07a12
#include <linux/serial.h>
#include <asm/dma.h>
#define NR_PORTS 2
#define NR_PORTS 4
#define OFFSET_THR 0x00 /* Transmit Holding register */
#define OFFSET_RBR 0x00 /* Receive Buffer register */
#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
#define OFFSET_IER 0x04 /* Interrupt Enable Register */
#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
#define OFFSET_IIR 0x08 /* Interrupt Identification Register */
#define OFFSET_GCTL 0x08 /* Global Control Register */
#define OFFSET_LCR 0x0C /* Line Control Register */
#define OFFSET_MCR 0x10 /* Modem Control Register */
#define OFFSET_LSR 0x14 /* Line Status Register */
#define OFFSET_MSR 0x18 /* Modem Status Register */
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
#define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */
#define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */
#define OFFSET_THR 0x28 /* Transmit Holding register */
#define OFFSET_RBR 0x2C /* Receive Buffer register */
#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER_SET))
#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
#define UART_SET_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v)
#define UART_CLEAR_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
#define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
......@@ -112,9 +113,29 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
{
0xFFC02100,
IRQ_UART2_RX,
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART2_TX,
CH_UART2_RX,
#endif
#ifdef CONFIG_BFIN_UART2_CTSRTS
CONFIG_UART2_CTS_PIN,
CONFIG_UART2_RTS_PIN,
#endif
},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
{
0xFFC03100,
IRQ_UART3_RX,
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART3_TX,
CH_UART3_RX,
#endif
},
#endif
......@@ -124,15 +145,40 @@ int nr_ports = ARRAY_SIZE(bfin_serial_resource);
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
unsigned short val;
val = bfin_read16(BFIN_PORT_MUX);
val &= ~(PFDE | PFTE);
bfin_write16(BFIN_PORT_MUX, val);
#ifdef CONFIG_SERIAL_BFIN_UART0
/* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
/* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
#ifdef CONFIG_BFIN_UART1_CTSRTS
/* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
#endif
#endif
val = bfin_read16(PORTF_FER);
val |= 0xF;
bfin_write16(PORTF_FER, val);
#ifdef CONFIG_SERIAL_BFIN_UART2
/* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
/* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
#ifdef CONFIG_BFIN_UART3_CTSRTS
/* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
#endif
#endif
SSYNC();
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
gpio_request(uart->cts_pin, NULL);
......
include/asm-blackfin/mach-bf548/blackfin.h
View file @ 24a07a12
......@@ -34,24 +34,26 @@
#define BF548_FAMILY
#include "bf548.h"
#include "mem_map.h"
#include "anomaly.h"
#ifdef CONFIG_BF542
#include "bf542.h"
#include "defBF542.h"
#endif
#ifdef CONFIG_BF544
#include "bf544.h"
#include "defBF544.h"
#endif
#ifdef CONFIG_BF548
#include "bf548.h"
#include "defBF548.h"
#endif
#ifdef CONFIG_BF549
#include "bf549.h"
#include "defBF549.h"
#endif
#include "mem_map.h"
#include "anomaly.h"
#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
#ifdef CONFIG_BF542
#include "cdefBF542.h"
......
include/asm-blackfin/mach-bf548/cdefBF54x_base.h
View file @ 24a07a12
......@@ -31,7 +31,7 @@
#ifndef _CDEF_BF54X_H
#define _CDEF_BF54X_H
#include <defBF54x_base.h>
#include "defBF54x_base.h"
/* ************************************************************** */
/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x */
......@@ -70,12 +70,18 @@
#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val)
#define bfin_read_SIC_IMASK2() bfin_read32(SIC_IMASK2)
#define bfin_write_SIC_IMASK2(val) bfin_write32(SIC_IMASK2, val)
#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + (x << 2))
#define bfin_write_SIC_IMASK(x, val) bfin_write32((SIC_IMASK0 + (x << 2)), val)
#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0)
#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val)
#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1)
#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val)
#define bfin_read_SIC_ISR2() bfin_read32(SIC_ISR2)
#define bfin_write_SIC_ISR2(val) bfin_write32(SIC_ISR2, val)
#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + (x << 2))
#define bfin_write_SIC_ISR(x, val) bfin_write32((SIC_ISR0 + (x << 2)), val)
#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0)
#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val)
#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1)
......@@ -710,21 +716,21 @@
#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR)
#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR)
#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR)
#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR)
#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val)
#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG)
#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val)
#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT)
#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val)
#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY)
#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY)
#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val)
#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT)
#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val)
#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY)
#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY)
#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val)
#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR)
#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR)
#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR)
#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR)
#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val)
#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS)
#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val)
#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP)
......@@ -734,23 +740,23 @@
#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT)
#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR)
#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR)
#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR)
#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR)
#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val)
#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG)
#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val)
#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT)
#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val)
#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY)
#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY)
#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val)
#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT)
#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val)
#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY)
#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY)
#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val)
#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR)
#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR)
#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR)
#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR)
#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val)
#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS)
#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val)
#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP)
......@@ -763,9 +769,9 @@
/* MDMA Stream 1 Registers */
#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR)
#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR)
#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR)
#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR)
#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val)
#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG)
#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val)
#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT)
......@@ -777,9 +783,9 @@
#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY)
#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY)
#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR)
#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR)
#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR)
#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR)
#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val)
#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS)
#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val)
#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP)
......@@ -789,9 +795,9 @@
#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT)
#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR)
#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR)
#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR)
#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR)
#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val)
#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG)
#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val)
#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT)
......@@ -803,9 +809,9 @@
#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY)
#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY)
#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR)
#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR)
#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR)
#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR)
#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val)
#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS)
#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val)
#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP)
......
include/asm-blackfin/mach-bf548/defBF542.h
View file @ 24a07a12
This diff is collapsed.
include/asm-blackfin/mach-bf548/defBF544.h
View file @ 24a07a12
......@@ -538,21 +538,13 @@
/* Bit masks for PIXC_CTL */
#define PIXC_EN 0x1 /* Pixel Compositor Enable */
#define nPIXC_EN 0x0
#define OVR_A_EN 0x2 /* Overlay A Enable */
#define nOVR_A_EN 0x0
#define OVR_B_EN 0x4 /* Overlay B Enable */
#define nOVR_B_EN 0x0
#define IMG_FORM 0x8 /* Image Data Format */
#define nIMG_FORM 0x0
#define OVR_FORM 0x10 /* Overlay Data Format */
#define nOVR_FORM 0x0
#define OUT_FORM 0x20 /* Output Data Format */
#define nOUT_FORM 0x0
#define UDS_MOD 0x40 /* Resampling Mode */
#define nUDS_MOD 0x0
#define TC_EN 0x80 /* Transparent Color Enable */
#define nTC_EN 0x0
#define IMG_STAT 0x300 /* Image FIFO Status */
#define OVR_STAT 0xc00 /* Overlay FIFO Status */
#define WM_LVL 0x3000 /* FIFO Watermark Level */
......@@ -600,13 +592,9 @@
/* Bit masks for PIXC_INTRSTAT */
#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
#define nOVR_INT_EN 0x0
#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
#define nFRM_INT_EN 0x0
#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
#define nOVR_INT_STAT 0x0
#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
#define nFRM_INT_STAT 0x0
/* Bit masks for PIXC_RYCON */
......@@ -614,7 +602,6 @@
#define A12 0xffc00 /* A12 in the Coefficient Matrix */
#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
#define nRY_MULT4 0x0
/* Bit masks for PIXC_GUCON */
......@@ -622,7 +609,6 @@
#define A22 0xffc00 /* A22 in the Coefficient Matrix */
#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
#define nGU_MULT4 0x0
/* Bit masks for PIXC_BVCON */
......@@ -630,7 +616,6 @@
#define A32 0xffc00 /* A32 in the Coefficient Matrix */
#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
#define nBV_MULT4 0x0
/* Bit masks for PIXC_CCBIAS */
......@@ -647,48 +632,28 @@
/* Bit masks for HOST_CONTROL */
#define HOST_EN 0x1 /* Host Enable */
#define nHOST_EN 0x0
#define HOST_END 0x2 /* Host Endianess */
#define nHOST_END 0x0
#define DATA_SIZE 0x4 /* Data Size */
#define nDATA_SIZE 0x0
#define HOST_RST 0x8 /* Host Reset */
#define nHOST_RST 0x0
#define HRDY_OVR 0x20 /* Host Ready Override */
#define nHRDY_OVR 0x0
#define INT_MODE 0x40 /* Interrupt Mode */
#define nINT_MODE 0x0
#define BT_EN 0x80 /* Bus Timeout Enable */
#define nBT_EN 0x0
#define EHW 0x100 /* Enable Host Write */
#define nEHW 0x0
#define EHR 0x200 /* Enable Host Read */
#define nEHR 0x0
#define BDR 0x400 /* Burst DMA Requests */
#define nBDR 0x0
/* Bit masks for HOST_STATUS */
#define READY 0x1 /* DMA Ready */
#define nREADY 0x0
#define FIFOFULL 0x2 /* FIFO Full */
#define nFIFOFULL 0x0
#define FIFOEMPTY 0x4 /* FIFO Empty */
#define nFIFOEMPTY 0x0
#define COMPLETE 0x8 /* DMA Complete */
#define nCOMPLETE 0x0
#define HSHK 0x10 /* Host Handshake */
#define nHSHK 0x0
#define TIMEOUT 0x20 /* Host Timeout */
#define nTIMEOUT 0x0
#define HIRQ 0x40 /* Host Interrupt Request */
#define nHIRQ 0x0
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
#define nALLOW_CNFG 0x0
#define DMA_DIR 0x100 /* DMA Direction */
#define nDMA_DIR 0x0
#define BTE 0x200 /* Bus Timeout Enabled */
#define nBTE 0x0
/* Bit masks for HOST_TIMEOUT */
......@@ -697,67 +662,42 @@
/* Bit masks for TIMER_ENABLE1 */
#define TIMEN8 0x1 /* Timer 8 Enable */
#define nTIMEN8 0x0
#define TIMEN9 0x2 /* Timer 9 Enable */
#define nTIMEN9 0x0
#define TIMEN10 0x4 /* Timer 10 Enable */
#define nTIMEN10 0x0
/* Bit masks for TIMER_DISABLE1 */
#define TIMDIS8 0x1 /* Timer 8 Disable */
#define nTIMDIS8 0x0
#define TIMDIS9 0x2 /* Timer 9 Disable */
#define nTIMDIS9 0x0
#define TIMDIS10 0x4 /* Timer 10 Disable */
#define nTIMDIS10 0x0
/* Bit masks for TIMER_STATUS1 */
#define TIMIL8 0x1 /* Timer 8 Interrupt */
#define nTIMIL8 0x0
#define TIMIL9 0x2 /* Timer 9 Interrupt */
#define nTIMIL9 0x0
#define TIMIL10 0x4 /* Timer 10 Interrupt */
#define nTIMIL10 0x0
#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
#define nTOVF_ERR8 0x0
#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
#define nTOVF_ERR9 0x0
#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
#define nTOVF_ERR10 0x0
#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
#define nTRUN8 0x0
#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
#define nTRUN9 0x0
#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
#define nTRUN10 0x0
/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
/* Bit masks for HMDMAx_CONTROL */
#define HMDMAEN 0x1 /* Handshake MDMA Enable */
#define nHMDMAEN 0x0
#define REP 0x2 /* Handshake MDMA Request Polarity */
#define nREP 0x0
#define UTE 0x8 /* Urgency Threshold Enable */
#define nUTE 0x0
#define OIE 0x10 /* Overflow Interrupt Enable */
#define nOIE 0x0
#define BDIE 0x20 /* Block Done Interrupt Enable */
#define nBDIE 0x0
#define MBDI 0x40 /* Mask Block Done Interrupt */
#define nMBDI 0x0
#define DRQ 0x300 /* Handshake MDMA Request Type */
#define RBC 0x1000 /* Force Reload of BCOUNT */
#define nRBC 0x0
#define PS 0x2000 /* Pin Status */
#define nPS 0x0
#define OI 0x4000 /* Overflow Interrupt Generated */
#define nOI 0x0
#define BDI 0x8000 /* Block Done Interrupt Generated */
#define nBDI 0x0
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
......
include/asm-blackfin/mach-bf548/defBF548.h
View file @ 24a07a12
This diff is collapsed.
include/asm-blackfin/mach-bf548/defBF549.h
View file @ 24a07a12
This diff is collapsed.
include/asm-blackfin/mach-bf548/dma.h
View file @ 24a07a12
......@@ -44,7 +44,6 @@
#define CH_UART1_TX 9
#define CH_ATAPI_RX 10
#define CH_ATAPI_TX 11
#define CH_EPPI0 12
#define CH_EPPI1 13
#define CH_EPPI2 14
......@@ -58,6 +57,17 @@
#define CH_SDH 22
#define CH_SPI2 23
#define MAX_BLACKFIN_DMA_CHANNEL CH_SPI2
#define CH_MEM_STREAM0_DEST 24
#define CH_MEM_STREAM0_SRC 25
#define CH_MEM_STREAM1_DEST 26
#define CH_MEM_STREAM1_SRC 27
#define CH_MEM_STREAM2_DEST 28
#define CH_MEM_STREAM2_SRC 29
#define CH_MEM_STREAM3_DEST 30
#define CH_MEM_STREAM3_SRC 31
#define MAX_BLACKFIN_DMA_CHANNEL 32
extern int channel2irq(unsigned int channel);
extern struct dma_register *base_addr[];
#endif
include/asm-blackfin/mach-bf548/gpio.h 0 → 100644
View file @ 24a07a12
/*
* File: include/asm-blackfin/mach-bf548/gpio.h
* Based on:
* Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
*
* Created:
* Description:
*
* Modified:
* Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define GPIO_PA0 0
#define GPIO_PA1 1
#define GPIO_PA2 2
#define GPIO_PA3 3
#define GPIO_PA4 4
#define GPIO_PA5 5
#define GPIO_PA6 6
#define GPIO_PA7 7
#define GPIO_PA8 8
#define GPIO_PA9 9
#define GPIO_PA10 10
#define GPIO_PA11 11
#define GPIO_PA12 12
#define GPIO_PA13 13
#define GPIO_PA14 14
#define GPIO_PA15 15
#define GPIO_PB0 16
#define GPIO_PB1 17
#define GPIO_PB2 18
#define GPIO_PB3 19
#define GPIO_PB4 20
#define GPIO_PB5 21
#define GPIO_PB6 22
#define GPIO_PB7 23
#define GPIO_PB8 24
#define GPIO_PB9 25
#define GPIO_PB10 26
#define GPIO_PB11 27
#define GPIO_PB12 28
#define GPIO_PB13 29
#define GPIO_PB14 30
#define GPIO_PB15 31 /* N/A */
#define GPIO_PC0 32
#define GPIO_PC1 33
#define GPIO_PC2 34
#define GPIO_PC3 35
#define GPIO_PC4 36
#define GPIO_PC5 37
#define GPIO_PC6 38
#define GPIO_PC7 39
#define GPIO_PC8 40
#define GPIO_PC9 41
#define GPIO_PC10 42
#define GPIO_PC11 43
#define GPIO_PC12 44
#define GPIO_PC13 45
#define GPIO_PC14 46 /* N/A */
#define GPIO_PC15 47 /* N/A */
#define GPIO_PD0 48
#define GPIO_PD1 49
#define GPIO_PD2 50
#define GPIO_PD3 51
#define GPIO_PD4 52
#define GPIO_PD5 53
#define GPIO_PD6 54
#define GPIO_PD7 55
#define GPIO_PD8 56
#define GPIO_PD9 57
#define GPIO_PD10 58
#define GPIO_PD11 59
#define GPIO_PD12 60
#define GPIO_PD13 61
#define GPIO_PD14 62
#define GPIO_PD15 63
#define GPIO_PE0 64
#define GPIO_PE1 65
#define GPIO_PE2 66
#define GPIO_PE3 67
#define GPIO_PE4 68
#define GPIO_PE5 69
#define GPIO_PE6 70
#define GPIO_PE7 71
#define GPIO_PE8 72
#define GPIO_PE9 73
#define GPIO_PE10 74
#define GPIO_PE11 75
#define GPIO_PE12 76
#define GPIO_PE13 77
#define GPIO_PE14 78
#define GPIO_PE15 79
#define GPIO_PF0 80
#define GPIO_PF1 81
#define GPIO_PF2 82
#define GPIO_PF3 83
#define GPIO_PF4 84
#define GPIO_PF5 85
#define GPIO_PF6 86
#define GPIO_PF7 87
#define GPIO_PF8 88
#define GPIO_PF9 89
#define GPIO_PF10 90
#define GPIO_PF11 91
#define GPIO_PF12 92
#define GPIO_PF13 93
#define GPIO_PF14 94
#define GPIO_PF15 95
#define GPIO_PG0 96
#define GPIO_PG1 97
#define GPIO_PG2 98
#define GPIO_PG3 99
#define GPIO_PG4 100
#define GPIO_PG5 101
#define GPIO_PG6 102
#define GPIO_PG7 103
#define GPIO_PG8 104
#define GPIO_PG9 105
#define GPIO_PG10 106
#define GPIO_PG11 107
#define GPIO_PG12 108
#define GPIO_PG13 109
#define GPIO_PG14 110
#define GPIO_PG15 111
#define GPIO_PH0 112
#define GPIO_PH1 113
#define GPIO_PH2 114
#define GPIO_PH3 115
#define GPIO_PH4 116
#define GPIO_PH5 117
#define GPIO_PH6 118
#define GPIO_PH7 119
#define GPIO_PH8 120
#define GPIO_PH9 121
#define GPIO_PH10 122
#define GPIO_PH11 123
#define GPIO_PH12 124
#define GPIO_PH13 125
#define GPIO_PH14 126 /* N/A */
#define GPIO_PH15 127 /* N/A */
#define GPIO_PI0 128
#define GPIO_PI1 129
#define GPIO_PI2 130
#define GPIO_PI3 131
#define GPIO_PI4 132
#define GPIO_PI5 133
#define GPIO_PI6 134
#define GPIO_PI7 135
#define GPIO_PI8 136
#define GPIO_PI9 137
#define GPIO_PI10 138
#define GPIO_PI11 139
#define GPIO_PI12 140
#define GPIO_PI13 141
#define GPIO_PI14 142
#define GPIO_PI15 143
#define GPIO_PJ0 144
#define GPIO_PJ1 145
#define GPIO_PJ2 146
#define GPIO_PJ3 147
#define GPIO_PJ4 148
#define GPIO_PJ5 149
#define GPIO_PJ6 150
#define GPIO_PJ7 151
#define GPIO_PJ8 152
#define GPIO_PJ9 153
#define GPIO_PJ10 154
#define GPIO_PJ11 155
#define GPIO_PJ12 156
#define GPIO_PJ13 157
#define GPIO_PJ14 158
#define GPIO_PJ15 159
#define MAX_BLACKFIN_GPIOS 160
struct gpio_port_t {
unsigned short port_fer;
unsigned short dummy1;
unsigned short port_data;
unsigned short dummy2;
unsigned short port_set;
unsigned short dummy3;
unsigned short port_clear;
unsigned short dummy4;
unsigned short port_dir_set;
unsigned short dummy5;
unsigned short port_dir_clear;
unsigned short dummy6;
unsigned short port_inen;
unsigned short dummy7;
unsigned int port_mux;
};
include/asm-blackfin/mach-bf548/irq.h
View file @ 24a07a12
This diff is collapsed.
include/asm-blackfin/mach-bf561/dma.h
View file @ 24a07a12
......@@ -32,4 +32,7 @@
#define CH_IMEM_STREAM1_SRC 34
#define CH_IMEM_STREAM1_DEST 35
extern int channel2irq(unsigned int channel);
extern struct dma_register *base_addr[];
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7