ARM: OMAP1: Move dpll1 rates selection from config to runtime

For still better multi-OMAP1 support, expand omap1_rate_table with flags
for different SoC types and match them while selecting clock rates. The
idea is stolen from current omap24xx clock rate selection algorithm.

Since clkdev platform flag definitions are reused here, those had to be
expanded with one extra entry for OMAP1710 subtype, as this is the only
SoC for which we allow selection of the highest, 216 MHz rate.

Once done, remove no longer needed clock rate configure time options.

Tested on Amstrad Delta.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/configs/omap1_defconfig

@@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_ARM_182MHZ=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_PCCARD=y
 CONFIG_OMAP_CF=y

arch/arm/mach-omap1/Kconfig

@@ -168,70 +168,6 @@ config MACH_OMAP_GENERIC
           custom OMAP boards. Say Y here if you have a custom
           board.
 
-comment "OMAP CPU Speed"
-	depends on ARCH_OMAP1
-
-config OMAP_ARM_216MHZ
-	bool "OMAP ARM 216 MHz CPU (1710 only)"
-        depends on ARCH_OMAP1 && ARCH_OMAP16XX
-        help
-          Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N.
-
-config OMAP_ARM_195MHZ
-	bool "OMAP ARM 195 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
-	help
-          Enable 195MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_192MHZ
-	bool "OMAP ARM 192 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-	help
-          Enable 192MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_182MHZ
-	bool "OMAP ARM 182 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
-	help
-          Enable 182MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_168MHZ
-	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
-	help
-          Enable 168MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_150MHZ
-	bool "OMAP ARM 150 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	  Enable 150MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_120MHZ
-	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
-	help
-          Enable 120MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_96MHZ
-	bool "OMAP ARM 96 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
-	help
-          Enable 96MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_60MHZ
-	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
-        default y
-	help
-          Enable 60MHz clock for OMAP CPU. If unsure, say Y.
-
-config OMAP_ARM_30MHZ
-	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
-	help
-          Enable 30MHz clock for OMAP CPU. If unsure, say N.
-
 endmenu
 
 endif

arch/arm/mach-omap1/clock.c

@@ -197,6 +197,9 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 	ref_rate = ck_ref_p->rate;
 
 	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+
 		if (ptr->xtal != ref_rate)
 			continue;
 
@@ -290,6 +293,9 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
 	highest_rate = -EINVAL;
 
 	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+
 		if (ptr->xtal != ref_rate)
 			continue;
 

arch/arm/mach-omap1/clock.h

@@ -111,4 +111,7 @@ extern const struct clkops clkops_dummy;
 extern const struct clkops clkops_uart_16xx;
 extern const struct clkops clkops_generic;
 
+/* used for passing SoC type to omap1_{select,round_to}_table_rate() */
+extern u32 cpu_mask;
+
 #endif

arch/arm/mach-omap1/clock_data.c

@@ -778,12 +778,14 @@ static void __init omap1_show_rates(void)
 		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 }
 
+u32 cpu_mask;
+
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
 	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
-	u32 reg, cpu_mask;
+	u32 reg;
 
 #ifdef CONFIG_DEBUG_LL
 	/*
@@ -808,6 +810,8 @@ int __init omap1_clk_init(void)
 		clk_preinit(c->lk.clk);
 
 	cpu_mask = 0;
+	if (cpu_is_omap1710())
+		cpu_mask |= CK_1710;
 	if (cpu_is_omap16xx())
 		cpu_mask |= CK_16XX;
 	if (cpu_is_omap1510())

arch/arm/mach-omap1/opp.h

@@ -21,6 +21,7 @@ struct mpu_rate {
 	unsigned long		pll_rate;
 	__u16			ckctl_val;
 	__u16			dpllctl_val;
+	u32			flags;
 };
 
 extern struct mpu_rate omap1_rate_table[];

arch/arm/mach-omap1/opp_data.c

@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <plat/clkdev_omap.h>
 #include "opp.h"
 
 /*-------------------------------------------------------------------------
@@ -20,40 +21,34 @@ struct mpu_rate omap1_rate_table[] = {
 	 * NOTE: Comment order here is different from bits in CKCTL value:
 	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
 	 */
-#if defined(CONFIG_OMAP_ARM_216MHZ)
-	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_195MHZ)
-	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_192MHZ)
-	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
-	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
-	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
-	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
-	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_182MHZ)
-	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_168MHZ)
-	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_150MHZ)
-	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_120MHZ)
-	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_96MHZ)
-	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_60MHZ)
-	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_30MHZ)
-	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
-#endif
+	{ 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */
+			CK_1710 },
+	{ 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */
+			CK_7XX },
+	{ 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */
+			CK_16XX },
+	{ 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */
+			CK_16XX },
+	{  96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */
+			CK_16XX },
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */
+			CK_16XX },
+	{  24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */
+			CK_16XX },
+	{ 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */
+			CK_7XX },
+	{ 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */
+			CK_16XX|CK_7XX },
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */
+			CK_1510 },
+	{ 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */
+			CK_16XX|CK_1510|CK_310|CK_7XX },
+	{  96000000, 12000000,  96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */
+			CK_16XX|CK_1510|CK_310|CK_7XX },
+	{  60000000, 12000000,  60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */
+			CK_16XX|CK_1510|CK_310|CK_7XX },
+	{  30000000, 12000000,  60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */
+			CK_16XX|CK_1510|CK_310|CK_7XX },
 	{ 0, 0, 0, 0, 0 },
 };
 

arch/arm/plat-omap/include/plat/clkdev_omap.h

@@ -40,6 +40,7 @@ struct omap_clk {
 #define CK_443X		(1 << 11)
 #define CK_TI816X	(1 << 12)
 #define CK_446X		(1 << 13)
+#define CK_1710		(1 << 15)	/* 1710 extra for rate selection */
 
 
 #define CK_34XX		(CK_3430ES1 | CK_3430ES2PLUS)