CRIS v32: add ARTPEC-3 and P1343 device trees

Add a device tree for the Axis P1343 with the ARTPEC-3 SoC and on-board
LEDs and RTC.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

arch/cris/boot/dts/artpec3.dtsi

+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "axis,crisv32";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "artpec3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "axis,crisv32-intc";
+			reg = <0xb002a000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gio: gpio@b0020000 {
+			compatible = "axis,artpec3-gio";
+			reg = <0xb0020000 0x1000>;
+			interrupts = <61>;
+			gpio-controller;
+			#gpio-cells = <3>;
+		};
+
+		serial@b003e000 {
+			compatible = "axis,etraxfs-uart";
+			reg = <0xb003e000 0x1000>;
+			interrupts = <64>;
+			status = "disabled";
+		};
+	};
+};

arch/cris/boot/dts/p1343.dts

+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/include/ "artpec3.dtsi"
+
+/ {
+	model = "Axis P1343 Network Camera";
+	compatible = "axis,p1343";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		uart0: serial@b003e000 {
+			status = "okay";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "status:green";
+			gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		status_red {
+			label = "status:red";
+			gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		network_green {
+			label = "network:green";
+			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		network_red {
+			label = "network:red";
+			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		power_red {
+			label = "power:red";
+			gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		activity-button@0 {
+			label = "Activity Button";
+			linux,code = <KEY_FN>;
+			gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>;
+		};
+	};
+};