ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat string

Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7790 SoC.

This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm/boot/dts/r8a7790.dtsi

@@ -200,7 +200,7 @@ gic: interrupt-controller@f1001000 {
 	};
 
 	gpio0: gpio@e6050000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6050000 0 0x50>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -214,7 +214,7 @@ gpio0: gpio@e6050000 {
 	};
 
 	gpio1: gpio@e6051000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6051000 0 0x50>;
 		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -228,7 +228,7 @@ gpio1: gpio@e6051000 {
 	};
 
 	gpio2: gpio@e6052000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6052000 0 0x50>;
 		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -242,7 +242,7 @@ gpio2: gpio@e6052000 {
 	};
 
 	gpio3: gpio@e6053000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6053000 0 0x50>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -256,7 +256,7 @@ gpio3: gpio@e6053000 {
 	};
 
 	gpio4: gpio@e6054000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6054000 0 0x50>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -270,7 +270,7 @@ gpio4: gpio@e6054000 {
 	};
 
 	gpio5: gpio@e6055000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055000 0 0x50>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;