Merge tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here's a few USB and PHY fixes for 4.2-rc4.

  Nothing major, the shortlog has the full details.

  All of these have been in linux-next successfully"

* tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
  USB: OHCI: fix bad #define in ohci-tmio.c
  cdc-acm: Destroy acm_minors IDR on module exit
  usb-storage: Add ignore-device quirk for gm12u320 based usb mini projectors
  usb-storage: ignore ZTE MF 823 card reader in mode 0x1225
  USB: OHCI: Fix race between ED unlink and URB submission
  usb: core: lpm: set lpm_capable for root hub device
  xhci: do not report PLC when link is in internal resume state
  xhci: prevent bus_suspend if SS port resuming in phase 1
  xhci: report U3 when link is in resume state
  xhci: Calculate old endpoints correctly on device reset
  usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function
  xhci: Workaround to get D3 working in Intel xHCI
  xhci: call BIOS workaround to enable runtime suspend on Intel Braswell
  usb: dwc3: Reset the transfer resource index on SET_INTERFACE
  usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU
  usb: gadget: mv_udc_core: fix phy_regs I/O memory leak
  usb: ulpi: ulpi_init should be executed in subsys_initcall
  phy: berlin-usb: fix divider for BG2
  phy: berlin-usb: fix divider for BG2CD
  phy/pxa: add HAS_IOMEM dependency
  ...

drivers/phy/Kconfig

@@ -56,6 +56,7 @@ config PHY_EXYNOS_MIPI_VIDEO
 
 config PHY_PXA_28NM_HSIC
 	tristate "Marvell USB HSIC 28nm PHY Driver"
+	depends on HAS_IOMEM
 	select GENERIC_PHY
 	help
 	  Enable this to support Marvell USB HSIC PHY driver for Marvell
@@ -66,6 +67,7 @@ config PHY_PXA_28NM_HSIC
 
 config PHY_PXA_28NM_USB2
 	tristate "Marvell USB 2.0 28nm PHY Driver"
+	depends on HAS_IOMEM
 	select GENERIC_PHY
 	help
 	  Enable this to support Marvell USB 2.0 PHY driver for Marvell

drivers/phy/phy-berlin-usb.c

@@ -105,9 +105,9 @@
 
 static const u32 phy_berlin_pll_dividers[] = {
 	/* Berlin 2 */
-	CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
-	/* Berlin 2CD */
 	CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
+	/* Berlin 2CD/Q */
+	CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
 };
 
 struct phy_berlin_usb_priv {

drivers/phy/phy-ti-pipe3.c

@@ -28,7 +28,6 @@
 #include <linux/delay.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
-#include <linux/spinlock.h>
 
 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
@@ -83,10 +82,6 @@ struct ti_pipe3 {
 	struct clk		*refclk;
 	struct clk		*div_clk;
 	struct pipe3_dpll_map	*dpll_map;
-	bool			enabled;
-	spinlock_t		lock;	/* serialize clock enable/disable */
-	/* the below flag is needed specifically for SATA */
-	bool			refclk_enabled;
 };
 
 static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -137,6 +132,9 @@ static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
 	return NULL;
 }
 
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
+static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
+
 static int ti_pipe3_power_off(struct phy *x)
 {
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
@@ -217,6 +215,7 @@ static int ti_pipe3_init(struct phy *x)
 	u32 val;
 	int ret = 0;
 
+	ti_pipe3_enable_clocks(phy);
 	/*
 	 * Set pcie_pcs register to 0x96 for proper functioning of phy
 	 * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
@@ -250,13 +249,12 @@ static int ti_pipe3_exit(struct phy *x)
 	u32 val;
 	unsigned long timeout;
 
-	/* SATA DPLL can't be powered down due to Errata i783 and PCIe
-	 * does not have internal DPLL
-	 */
-	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") ||
-	    of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie"))
+	/* SATA DPLL can't be powered down due to Errata i783 */
+	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
 		return 0;
 
+	/* PCIe doesn't have internal DPLL */
+	if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
 		/* Put DPLL in IDLE mode */
 		val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
 		val |= PLL_IDLE;
@@ -276,6 +274,9 @@ static int ti_pipe3_exit(struct phy *x)
 				val);
 			return -EBUSY;
 		}
+	}
+
+	ti_pipe3_disable_clocks(phy);
 
 	return 0;
 }
@@ -306,7 +307,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	phy->dev		= &pdev->dev;
-	spin_lock_init(&phy->lock);
 
 	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
 		match = of_match_device(ti_pipe3_id_table, &pdev->dev);
@@ -402,6 +402,10 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, phy);
 	pm_runtime_enable(phy->dev);
+	/* Prevent auto-disable of refclk for SATA PHY due to Errata i783 */
+	if (of_device_is_compatible(node, "ti,phy-pipe3-sata"))
+		if (!IS_ERR(phy->refclk))
+			clk_prepare_enable(phy->refclk);
 
 	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
 	if (IS_ERR(generic_phy))
@@ -413,63 +417,33 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	if (IS_ERR(phy_provider))
 		return PTR_ERR(phy_provider);
 
-	pm_runtime_get(&pdev->dev);
-
 	return 0;
 }
 
 static int ti_pipe3_remove(struct platform_device *pdev)
 {
-	if (!pm_runtime_suspended(&pdev->dev))
-		pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy)
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
 {
-	if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) {
-		int ret;
+	int ret = 0;
 
+	if (!IS_ERR(phy->refclk)) {
 		ret = clk_prepare_enable(phy->refclk);
 		if (ret) {
 			dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
 			return ret;
 		}
-		phy->refclk_enabled = true;
 	}
 
-	return 0;
-}
-
-static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy)
-{
-	if (!IS_ERR(phy->refclk))
-		clk_disable_unprepare(phy->refclk);
-
-	phy->refclk_enabled = false;
-}
-
-static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&phy->lock, flags);
-	if (phy->enabled)
-		goto err1;
-
-	ret = ti_pipe3_enable_refclk(phy);
-	if (ret)
-		goto err1;
-
 	if (!IS_ERR(phy->wkupclk)) {
 		ret = clk_prepare_enable(phy->wkupclk);
 		if (ret) {
 			dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
-			goto err2;
+			goto disable_refclk;
 		}
 	}
 
@@ -477,95 +451,32 @@ static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
 		ret = clk_prepare_enable(phy->div_clk);
 		if (ret) {
 			dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
-			goto err3;
+			goto disable_wkupclk;
 		}
 	}
 
-	phy->enabled = true;
-	spin_unlock_irqrestore(&phy->lock, flags);
 	return 0;
 
-err3:
+disable_wkupclk:
 	if (!IS_ERR(phy->wkupclk))
 		clk_disable_unprepare(phy->wkupclk);
 
-err2:
+disable_refclk:
 	if (!IS_ERR(phy->refclk))
 		clk_disable_unprepare(phy->refclk);
 
-	ti_pipe3_disable_refclk(phy);
-err1:
-	spin_unlock_irqrestore(&phy->lock, flags);
 	return ret;
 }
 
 static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&phy->lock, flags);
-	if (!phy->enabled) {
-		spin_unlock_irqrestore(&phy->lock, flags);
-		return;
-	}
-
 	if (!IS_ERR(phy->wkupclk))
 		clk_disable_unprepare(phy->wkupclk);
-	/* Don't disable refclk for SATA PHY due to Errata i783 */
-	if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
-		ti_pipe3_disable_refclk(phy);
+	if (!IS_ERR(phy->refclk))
+		clk_disable_unprepare(phy->refclk);
 	if (!IS_ERR(phy->div_clk))
 		clk_disable_unprepare(phy->div_clk);
-	phy->enabled = false;
-	spin_unlock_irqrestore(&phy->lock, flags);
-}
-
-static int ti_pipe3_runtime_suspend(struct device *dev)
-{
-	struct ti_pipe3	*phy = dev_get_drvdata(dev);
-
-	ti_pipe3_disable_clocks(phy);
-	return 0;
-}
-
-static int ti_pipe3_runtime_resume(struct device *dev)
-{
-	struct ti_pipe3	*phy = dev_get_drvdata(dev);
-	int ret = 0;
-
-	ret = ti_pipe3_enable_clocks(phy);
-	return ret;
-}
-
-static int ti_pipe3_suspend(struct device *dev)
-{
-	struct ti_pipe3	*phy = dev_get_drvdata(dev);
-
-	ti_pipe3_disable_clocks(phy);
-	return 0;
-}
-
-static int ti_pipe3_resume(struct device *dev)
-{
-	struct ti_pipe3	*phy = dev_get_drvdata(dev);
-	int ret;
-
-	ret = ti_pipe3_enable_clocks(phy);
-	if (ret)
-		return ret;
-
-	pm_runtime_disable(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-	return 0;
 }
-#endif
-
-static const struct dev_pm_ops ti_pipe3_pm_ops = {
-	SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
-			   ti_pipe3_runtime_resume, NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
-};
 
 static const struct of_device_id ti_pipe3_id_table[] = {
 	{
@@ -592,7 +503,6 @@ static struct platform_driver ti_pipe3_driver = {
 	.remove		= ti_pipe3_remove,
 	.driver		= {
 		.name	= "ti-pipe3",
-		.pm	= &ti_pipe3_pm_ops,
 		.of_match_table = ti_pipe3_id_table,
 	},
 };

drivers/usb/class/cdc-acm.c

@@ -1944,6 +1944,7 @@ static void __exit acm_exit(void)
 	usb_deregister(&acm_driver);
 	tty_unregister_driver(acm_tty_driver);
 	put_tty_driver(acm_tty_driver);
+	idr_destroy(&acm_minors);
 }
 
 module_init(acm_init);

drivers/usb/common/ulpi.c

@@ -242,7 +242,7 @@ static int __init ulpi_init(void)
 {
 	return bus_register(&ulpi_bus);
 }
-module_init(ulpi_init);
+subsys_initcall(ulpi_init);
 
 static void __exit ulpi_exit(void)
 {

drivers/usb/core/hcd.c

@@ -1022,9 +1022,12 @@ static int register_root_hub(struct usb_hcd *hcd)
 				dev_name(&usb_dev->dev), retval);
 		return (retval < 0) ? retval : -EMSGSIZE;
 	}
-	if (usb_dev->speed == USB_SPEED_SUPER) {
+
+	if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(usb_dev);
-		if (retval < 0) {
+		if (!retval) {
+			usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
+		} else if (usb_dev->speed == USB_SPEED_SUPER) {
 			mutex_unlock(&usb_bus_list_lock);
 			dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
 					dev_name(&usb_dev->dev), retval);

drivers/usb/core/hub.c

@@ -122,7 +122,7 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
 	return usb_get_intfdata(hdev->actconfig->interface[0]);
 }
 
-static int usb_device_supports_lpm(struct usb_device *udev)
+int usb_device_supports_lpm(struct usb_device *udev)
 {
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.

drivers/usb/core/usb.h

@@ -65,6 +65,7 @@ extern int  usb_hub_init(void);
 extern void usb_hub_cleanup(void);
 extern int usb_major_init(void);
 extern void usb_major_cleanup(void);
+extern int usb_device_supports_lpm(struct usb_device *udev);
 
 #ifdef	CONFIG_PM
 

drivers/usb/dwc3/ep0.c

@@ -727,6 +727,10 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
 		ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
 		break;
+	case USB_REQ_SET_INTERFACE:
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE");
+		dwc->start_config_issued = false;
+		/* Fall through */
 	default:
 		dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);

drivers/usb/gadget/udc/mv_udc_core.c

@@ -2167,7 +2167,7 @@ static int mv_udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	udc->phy_regs = ioremap(r->start, resource_size(r));
+	udc->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
 	if (udc->phy_regs == NULL) {
 		dev_err(&pdev->dev, "failed to map phy I/O memory\n");
 		return -EBUSY;

drivers/usb/gadget/udc/udc-core.c

@@ -60,13 +60,15 @@ static DEFINE_MUTEX(udc_lock);
 int usb_gadget_map_request(struct usb_gadget *gadget,
 		struct usb_request *req, int is_in)
 {
+	struct device *dev = gadget->dev.parent;
+
 	if (req->length == 0)
 		return 0;
 
 	if (req->num_sgs) {
 		int     mapped;
 
-		mapped = dma_map_sg(&gadget->dev, req->sg, req->num_sgs,
+		mapped = dma_map_sg(dev, req->sg, req->num_sgs,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 		if (mapped == 0) {
 			dev_err(&gadget->dev, "failed to map SGs\n");
@@ -75,11 +77,11 @@ int usb_gadget_map_request(struct usb_gadget *gadget,
 
 		req->num_mapped_sgs = mapped;
 	} else {
-		req->dma = dma_map_single(&gadget->dev, req->buf, req->length,
+		req->dma = dma_map_single(dev, req->buf, req->length,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 
-		if (dma_mapping_error(&gadget->dev, req->dma)) {
-			dev_err(&gadget->dev, "failed to map buffer\n");
+		if (dma_mapping_error(dev, req->dma)) {
+			dev_err(dev, "failed to map buffer\n");
 			return -EFAULT;
 		}
 	}
@@ -95,12 +97,12 @@ void usb_gadget_unmap_request(struct usb_gadget *gadget,
 		return;
 
 	if (req->num_mapped_sgs) {
-		dma_unmap_sg(&gadget->dev, req->sg, req->num_mapped_sgs,
+		dma_unmap_sg(gadget->dev.parent, req->sg, req->num_mapped_sgs,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 
 		req->num_mapped_sgs = 0;
 	} else {
-		dma_unmap_single(&gadget->dev, req->dma, req->length,
+		dma_unmap_single(gadget->dev.parent, req->dma, req->length,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 	}
 }

drivers/usb/host/ohci-q.c

@@ -981,10 +981,6 @@ static void finish_unlinks(struct ohci_hcd *ohci)
 		int			completed, modified;
 		__hc32			*prev;
 
-		/* Is this ED already invisible to the hardware? */
-		if (ed->state == ED_IDLE)
-			goto ed_idle;
-
 		/* only take off EDs that the HC isn't using, accounting for
 		 * frame counter wraps and EDs with partially retired TDs
 		 */
@@ -1012,12 +1008,10 @@ static void finish_unlinks(struct ohci_hcd *ohci)
 		}
 
 		/* ED's now officially unlinked, hc doesn't see */
-		ed->state = ED_IDLE;
 		ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
 		ed->hwNextED = 0;
 		wmb();
 		ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE);
-ed_idle:
 
 		/* reentrancy:  if we drop the schedule lock, someone might
 		 * have modified this list.  normally it's just prepending
@@ -1088,6 +1082,7 @@ static void finish_unlinks(struct ohci_hcd *ohci)
 		if (list_empty(&ed->td_list)) {
 			*last = ed->ed_next;
 			ed->ed_next = NULL;
+			ed->state = ED_IDLE;
 			list_del(&ed->in_use_list);
 		} else if (ohci->rh_state == OHCI_RH_RUNNING) {
 			*last = ed->ed_next;

drivers/usb/host/ohci-tmio.c

@@ -58,7 +58,7 @@
 #define CCR_PM_CKRNEN    0x0002
 #define CCR_PM_USBPW1    0x0004
 #define CCR_PM_USBPW2    0x0008
-#define CCR_PM_USBPW3    0x0008
+#define CCR_PM_USBPW3    0x0010
 #define CCR_PM_PMEE      0x0100
 #define CCR_PM_PMES      0x8000
 

drivers/usb/host/xhci-hub.c

@@ -484,10 +484,13 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
 	u32 pls = status_reg & PORT_PLS_MASK;
 
 	/* resume state is a xHCI internal state.
-	 * Do not report it to usb core.
+	 * Do not report it to usb core, instead, pretend to be U3,
+	 * thus usb core knows it's not ready for transfer
 	 */
-	if (pls == XDEV_RESUME)
+	if (pls == XDEV_RESUME) {
+		*status |= USB_SS_PORT_LS_U3;
 		return;
+	}
 
 	/* When the CAS bit is set then warm reset
 	 * should be performed on port
@@ -588,7 +591,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 		status |= USB_PORT_STAT_C_RESET << 16;
 	/* USB3.0 only */
 	if (hcd->speed == HCD_USB3) {
-		if ((raw_port_status & PORT_PLC))
+		/* Port link change with port in resume state should not be
+		 * reported to usbcore, as this is an internal state to be
+		 * handled by xhci driver. Reporting PLC to usbcore may
+		 * cause usbcore clearing PLC first and port change event
+		 * irq won't be generated.
+		 */
+		if ((raw_port_status & PORT_PLC) &&
+			(raw_port_status & PORT_PLS_MASK) != XDEV_RESUME)
 			status |= USB_PORT_STAT_C_LINK_STATE << 16;
 		if ((raw_port_status & PORT_WRC))
 			status |= USB_PORT_STAT_C_BH_RESET << 16;
@@ -1120,10 +1130,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	spin_lock_irqsave(&xhci->lock, flags);
 
 	if (hcd->self.root_hub->do_remote_wakeup) {
-		if (bus_state->resuming_ports) {
+		if (bus_state->resuming_ports ||	/* USB2 */
+		    bus_state->port_remote_wakeup) {	/* USB3 */
 			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_dbg(xhci, "suspend failed because "
-						"a port is resuming\n");
+			xhci_dbg(xhci, "suspend failed because a port is resuming\n");
 			return -EBUSY;
 		}
 	}

drivers/usb/host/xhci-mem.c

@@ -1427,10 +1427,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		/* Attempt to use the ring cache */
 		if (virt_dev->num_rings_cached == 0)
 			return -ENOMEM;
+		virt_dev->num_rings_cached--;
 		virt_dev->eps[ep_index].new_ring =
 			virt_dev->ring_cache[virt_dev->num_rings_cached];
 		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
-		virt_dev->num_rings_cached--;
 		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
 					1, type);
 	}

drivers/usb/host/xhci-pci.c

@@ -23,10 +23,15 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/acpi.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
 
+#define PORT2_SSIC_CONFIG_REG2	0x883c
+#define PROG_DONE		(1 << 30)
+#define SSIC_PORT_UNUSED	(1 << 31)
+
 /* Device for a quirk */
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
@@ -176,20 +181,63 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 }
 
 /*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
  * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
  * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
  */
-static void xhci_pme_quirk(struct xhci_hcd *xhci)
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
 {
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	u32 val;
 	void __iomem *reg;
 
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+		/* Notify SSIC that SSIC profile programming is not done */
+		val = readl(reg) & ~PROG_DONE;
+		writel(val, reg);
+
+		/* Mark SSIC port as unused(suspend) or used(resume) */
+		val = readl(reg);
+		if (suspend)
+			val |= SSIC_PORT_UNUSED;
+		else
+			val &= ~SSIC_PORT_UNUSED;
+		writel(val, reg);
+
+		/* Notify SSIC that SSIC profile programming is done */
+		val = readl(reg) | PROG_DONE;
+		writel(val, reg);
+		readl(reg);
+	}
+
 	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
 	val = readl(reg);
 	writel(val | BIT(28), reg);
 	readl(reg);
 }
 
+#ifdef CONFIG_ACPI
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
+{
+	static const u8 intel_dsm_uuid[] = {
+		0xb7, 0x0c, 0x34, 0xac,	0x01, 0xe9, 0xbf, 0x45,
+		0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23,
+	};
+	acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL);
+}
+#else
+	static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+#endif /* CONFIG_ACPI */
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -263,6 +311,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			HCC_MAX_PSA(xhci->hcc_params) >= 4)
 		xhci->shared_hcd->can_do_streams = 1;
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_acpi_rtd3_enable(dev);
+
 	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
 	pm_runtime_put_noidle(&dev->dev);
 
@@ -307,7 +358,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 		pdev->no_d3cold = true;
 
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
-		xhci_pme_quirk(xhci);
+		xhci_pme_quirk(hcd, true);
 
 	return xhci_suspend(xhci, do_wakeup);
 }
@@ -340,7 +391,7 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 		usb_enable_intel_xhci_ports(pdev);
 
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
-		xhci_pme_quirk(xhci);
+		xhci_pme_quirk(hcd, false);
 
 	retval = xhci_resume(xhci, hibernated);
 	return retval;

drivers/usb/host/xhci-ring.c

@@ -1546,6 +1546,9 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		usb_hcd_resume_root_hub(hcd);
 	}
 
+	if (hcd->speed == HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE)
+		bus_state->port_remote_wakeup &= ~(1 << faked_port_index);
+
 	if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
 		xhci_dbg(xhci, "port resume event for port %d\n", port_id);
 

drivers/usb/host/xhci.c

@@ -3453,6 +3453,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 			return -EINVAL;
 	}
 
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
 	if (virt_dev->udev != udev) {
 		/* If the virt_dev and the udev does not match, this virt_dev
 		 * may belong to another udev.

drivers/usb/host/xhci.h

@@ -285,6 +285,7 @@ struct xhci_op_regs {
 #define XDEV_U0		(0x0 << 5)
 #define XDEV_U2		(0x2 << 5)
 #define XDEV_U3		(0x3 << 5)
+#define XDEV_INACTIVE	(0x6 << 5)
 #define XDEV_RESUME	(0xf << 5)
 /* true: port has power (see HCC_PPC) */
 #define PORT_POWER	(1 << 9)

drivers/usb/storage/unusual_devs.h

@@ -2065,6 +2065,18 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
+/* Reported by Oliver Neukum <oneukum@suse.com>
+ * This device morphes spontaneously into another device if the access
+ * pattern of Windows isn't followed. Thus writable media would be dirty
+ * if the initial instance is used. So the device is limited to its
+ * virtual CD.
+ * And yes, the concept that BCD goes up to 9 is not heeded */
+UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff,
+		"ZTE,Incorporated",
+		"ZTE WCDMA Technologies MSM",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
 /* Reported by Sven Geggus <sven-usbst@geggus.net>
  * This encrypted pen drive returns bogus data for the initial READ(10).
  */
@@ -2074,6 +2086,17 @@ UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_INITIAL_READ10 ),
 
+/* Reported by Hans de Goede <hdegoede@redhat.com>
+ * These are mini projectors using USB for both power and video data transport
+ * The usb-storage interface is a virtual windows driver CD, which the gm12u320
+ * driver automatically converts into framebuffer & kms dri device nodes.
+ */
+UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff,
+		"Grain-media Technology Corp.",
+		"USB3.0 Device GM12U320",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE ),
+
 /* Patch by Richard Schütz <r.schtz@t-online.de>
  * This external hard drive enclosure uses a JMicron chip which
  * needs the US_FL_IGNORE_RESIDUE flag to work properly. */