Skip to content

L
linux
Commit 277dc7ae authored by Russell King's avatar Russell King
Browse files
Options

Merge branch 'sa11x0-ir' into sa11x0

parents 374da9da d138dacb
Show whitespace changes
Inline Side-by-side
Showing with 1702 additions and 425 deletions
arch/arm/mach-sa1100/generic.c
View file @ 277dc7ae
......@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/pm.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
......@@ -289,6 +290,29 @@ static struct platform_device sa11x0rtc_device = {
.id = -1,
};
static struct resource sa11x0dma_resources[] = {
DEFINE_RES_MEM(__PREG(DDAR(0)), 6 * DMASp),
DEFINE_RES_IRQ(IRQ_DMA0),
DEFINE_RES_IRQ(IRQ_DMA1),
DEFINE_RES_IRQ(IRQ_DMA2),
DEFINE_RES_IRQ(IRQ_DMA3),
DEFINE_RES_IRQ(IRQ_DMA4),
DEFINE_RES_IRQ(IRQ_DMA5),
};
static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32);
static struct platform_device sa11x0dma_device = {
.name = "sa11x0-dma",
.id = -1,
.dev = {
.dma_mask = &sa11x0dma_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(sa11x0dma_resources),
.resource = sa11x0dma_resources,
};
static struct platform_device *sa11x0_devices[] __initdata = {
&sa11x0udc_device,
&sa11x0uart1_device,
......@@ -297,6 +321,7 @@ static struct platform_device *sa11x0_devices[] __initdata = {
&sa11x0pcmcia_device,
&sa11x0fb_device,
&sa11x0rtc_device,
&sa11x0dma_device,
};
static int __init sa1100_init(void)
......
drivers/dma/Kconfig
View file @ 277dc7ae
......@@ -252,6 +252,15 @@ config EP93XX_DMA
help
Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
config DMA_SA11X0
tristate "SA-11x0 DMA support"
depends on ARCH_SA1100
select DMA_ENGINE
help
Support the DMA engine found on Intel StrongARM SA-1100 and
SA-1110 SoCs. This DMA engine can only be used with on-chip
devices.
config DMA_ENGINE
bool
......
drivers/dma/Makefile
View file @ 277dc7ae
......@@ -27,3 +27,4 @@ obj-$(CONFIG_PL330_DMA) += pl330.o
obj-$(CONFIG_PCH_DMA) += pch_dma.o
obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
drivers/dma/sa11x0-dma.c 0 → 100644
View file @ 277dc7ae
/*
* SA11x0 DMAengine support
*
* Copyright (C) 2012 Russell King
* Derived in part from arch/arm/mach-sa1100/dma.c,
* Copyright (C) 2000, 2001 by Nicolas Pitre
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/sa11x0-dma.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#define NR_PHY_CHAN 6
#define DMA_ALIGN 3
#define DMA_MAX_SIZE 0x1fff
#define DMA_CHUNK_SIZE 0x1000
#define DMA_DDAR 0x00
#define DMA_DCSR_S 0x04
#define DMA_DCSR_C 0x08
#define DMA_DCSR_R 0x0c
#define DMA_DBSA 0x10
#define DMA_DBTA 0x14
#define DMA_DBSB 0x18
#define DMA_DBTB 0x1c
#define DMA_SIZE 0x20
#define DCSR_RUN (1 << 0)
#define DCSR_IE (1 << 1)
#define DCSR_ERROR (1 << 2)
#define DCSR_DONEA (1 << 3)
#define DCSR_STRTA (1 << 4)
#define DCSR_DONEB (1 << 5)
#define DCSR_STRTB (1 << 6)
#define DCSR_BIU (1 << 7)
#define DDAR_RW (1 << 0) /* 0 = W, 1 = R */
#define DDAR_E (1 << 1) /* 0 = LE, 1 = BE */
#define DDAR_BS (1 << 2) /* 0 = BS4, 1 = BS8 */
#define DDAR_DW (1 << 3) /* 0 = 8b, 1 = 16b */
#define DDAR_Ser0UDCTr (0x0 << 4)
#define DDAR_Ser0UDCRc (0x1 << 4)
#define DDAR_Ser1SDLCTr (0x2 << 4)
#define DDAR_Ser1SDLCRc (0x3 << 4)
#define DDAR_Ser1UARTTr (0x4 << 4)
#define DDAR_Ser1UARTRc (0x5 << 4)
#define DDAR_Ser2ICPTr (0x6 << 4)
#define DDAR_Ser2ICPRc (0x7 << 4)
#define DDAR_Ser3UARTTr (0x8 << 4)
#define DDAR_Ser3UARTRc (0x9 << 4)
#define DDAR_Ser4MCP0Tr (0xa << 4)
#define DDAR_Ser4MCP0Rc (0xb << 4)
#define DDAR_Ser4MCP1Tr (0xc << 4)
#define DDAR_Ser4MCP1Rc (0xd << 4)
#define DDAR_Ser4SSPTr (0xe << 4)
#define DDAR_Ser4SSPRc (0xf << 4)
struct sa11x0_dma_sg {
u32 addr;
u32 len;
};
struct sa11x0_dma_desc {
struct dma_async_tx_descriptor tx;
u32 ddar;
size_t size;
/* maybe protected by c->lock */
struct list_head node;
unsigned sglen;
struct sa11x0_dma_sg sg[0];
};
struct sa11x0_dma_phy;
struct sa11x0_dma_chan {
struct dma_chan chan;
spinlock_t lock;
dma_cookie_t lc;
/* protected by c->lock */
struct sa11x0_dma_phy *phy;
enum dma_status status;
struct list_head desc_submitted;
struct list_head desc_issued;
/* protected by d->lock */
struct list_head node;
u32 ddar;
const char *name;
};
struct sa11x0_dma_phy {
void __iomem *base;
struct sa11x0_dma_dev *dev;
unsigned num;
struct sa11x0_dma_chan *vchan;
/* Protected by c->lock */
unsigned sg_load;
struct sa11x0_dma_desc *txd_load;
unsigned sg_done;
struct sa11x0_dma_desc *txd_done;
#ifdef CONFIG_PM_SLEEP
u32 dbs[2];
u32 dbt[2];
u32 dcsr;
#endif
};
struct sa11x0_dma_dev {
struct dma_device slave;
void __iomem *base;
spinlock_t lock;
struct tasklet_struct task;
struct list_head chan_pending;
struct list_head desc_complete;
struct sa11x0_dma_phy phy[NR_PHY_CHAN];
};
static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan)
{
return container_of(chan, struct sa11x0_dma_chan, chan);
}
static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev)
{
return container_of(dmadev, struct sa11x0_dma_dev, slave);
}
static struct sa11x0_dma_desc *to_sa11x0_dma_tx(struct dma_async_tx_descriptor *tx)
{
return container_of(tx, struct sa11x0_dma_desc, tx);
}
static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c)
{
if (list_empty(&c->desc_issued))
return NULL;
return list_first_entry(&c->desc_issued, struct sa11x0_dma_desc, node);
}
static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd)
{
list_del(&txd->node);
p->txd_load = txd;
p->sg_load = 0;
dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n",
p->num, txd, txd->tx.cookie, txd->ddar);
}
static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p,
struct sa11x0_dma_chan *c)
{
struct sa11x0_dma_desc *txd = p->txd_load;
struct sa11x0_dma_sg *sg;
void __iomem *base = p->base;
unsigned dbsx, dbtx;
u32 dcsr;
if (!txd)
return;
dcsr = readl_relaxed(base + DMA_DCSR_R);
/* Don't try to load the next transfer if both buffers are started */
if ((dcsr & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB))
return;
if (p->sg_load == txd->sglen) {
struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c);
/*
* We have reached the end of the current descriptor.
* Peek at the next descriptor, and if compatible with
* the current, start processing it.
*/
if (txn && txn->ddar == txd->ddar) {
txd = txn;
sa11x0_dma_start_desc(p, txn);
} else {
p->txd_load = NULL;
return;
}
}
sg = &txd->sg[p->sg_load++];
/* Select buffer to load according to channel status */
if (((dcsr & (DCSR_BIU | DCSR_STRTB)) == (DCSR_BIU | DCSR_STRTB)) ||
((dcsr & (DCSR_BIU | DCSR_STRTA)) == 0)) {
dbsx = DMA_DBSA;
dbtx = DMA_DBTA;
dcsr = DCSR_STRTA | DCSR_IE | DCSR_RUN;
} else {
dbsx = DMA_DBSB;
dbtx = DMA_DBTB;
dcsr = DCSR_STRTB | DCSR_IE | DCSR_RUN;
}
writel_relaxed(sg->addr, base + dbsx);
writel_relaxed(sg->len, base + dbtx);
writel(dcsr, base + DMA_DCSR_S);
dev_dbg(p->dev->slave.dev, "pchan %u: load: DCSR:%02x DBS%c:%08x DBT%c:%08x\n",
p->num, dcsr,
'A' + (dbsx == DMA_DBSB), sg->addr,
'A' + (dbtx == DMA_DBTB), sg->len);
}
static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p,
struct sa11x0_dma_chan *c)
{
struct sa11x0_dma_desc *txd = p->txd_done;
if (++p->sg_done == txd->sglen) {
struct sa11x0_dma_dev *d = p->dev;
dev_vdbg(d->slave.dev, "pchan %u: txd %p[%x]: completed\n",
p->num, p->txd_done, p->txd_done->tx.cookie);
c->lc = txd->tx.cookie;
spin_lock(&d->lock);
list_add_tail(&txd->node, &d->desc_complete);
spin_unlock(&d->lock);
p->sg_done = 0;
p->txd_done = p->txd_load;
tasklet_schedule(&d->task);
}
sa11x0_dma_start_sg(p, c);
}
static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id)
{
struct sa11x0_dma_phy *p = dev_id;
struct sa11x0_dma_dev *d = p->dev;
struct sa11x0_dma_chan *c;
u32 dcsr;
dcsr = readl_relaxed(p->base + DMA_DCSR_R);
if (!(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB)))
return IRQ_NONE;
/* Clear reported status bits */
writel_relaxed(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB),
p->base + DMA_DCSR_C);
dev_dbg(d->slave.dev, "pchan %u: irq: DCSR:%02x\n", p->num, dcsr);
if (dcsr & DCSR_ERROR) {
dev_err(d->slave.dev, "pchan %u: error. DCSR:%02x DDAR:%08x DBSA:%08x DBTA:%08x DBSB:%08x DBTB:%08x\n",
p->num, dcsr,
readl_relaxed(p->base + DMA_DDAR),
readl_relaxed(p->base + DMA_DBSA),
readl_relaxed(p->base + DMA_DBTA),
readl_relaxed(p->base + DMA_DBSB),
readl_relaxed(p->base + DMA_DBTB));
}
c = p->vchan;
if (c) {
unsigned long flags;
spin_lock_irqsave(&c->lock, flags);
/*
* Now that we're holding the lock, check that the vchan
* really is associated with this pchan before touching the
* hardware. This should always succeed, because we won't
* change p->vchan or c->phy while the channel is actively
* transferring.
*/
if (c->phy == p) {
if (dcsr & DCSR_DONEA)
sa11x0_dma_complete(p, c);
if (dcsr & DCSR_DONEB)
sa11x0_dma_complete(p, c);
}
spin_unlock_irqrestore(&c->lock, flags);
}
return IRQ_HANDLED;
}
static void sa11x0_dma_start_txd(struct sa11x0_dma_chan *c)
{
struct sa11x0_dma_desc *txd = sa11x0_dma_next_desc(c);
/* If the issued list is empty, we have no further txds to process */
if (txd) {
struct sa11x0_dma_phy *p = c->phy;
sa11x0_dma_start_desc(p, txd);
p->txd_done = txd;
p->sg_done = 0;
/* The channel should not have any transfers started */
WARN_ON(readl_relaxed(p->base + DMA_DCSR_R) &
(DCSR_STRTA | DCSR_STRTB));
/* Clear the run and start bits before changing DDAR */
writel_relaxed(DCSR_RUN | DCSR_STRTA | DCSR_STRTB,
p->base + DMA_DCSR_C);
writel_relaxed(txd->ddar, p->base + DMA_DDAR);
/* Try to start both buffers */
sa11x0_dma_start_sg(p, c);
sa11x0_dma_start_sg(p, c);
}
}
static void sa11x0_dma_tasklet(unsigned long arg)
{
struct sa11x0_dma_dev *d = (struct sa11x0_dma_dev *)arg;
struct sa11x0_dma_phy *p;
struct sa11x0_dma_chan *c;
struct sa11x0_dma_desc *txd, *txn;
LIST_HEAD(head);
unsigned pch, pch_alloc = 0;
dev_dbg(d->slave.dev, "tasklet enter\n");
/* Get the completed tx descriptors */
spin_lock_irq(&d->lock);
list_splice_init(&d->desc_complete, &head);
spin_unlock_irq(&d->lock);
list_for_each_entry(txd, &head, node) {
c = to_sa11x0_dma_chan(txd->tx.chan);
dev_dbg(d->slave.dev, "vchan %p: txd %p[%x] completed\n",
c, txd, txd->tx.cookie);
spin_lock_irq(&c->lock);
p = c->phy;
if (p) {
if (!p->txd_done)
sa11x0_dma_start_txd(c);
if (!p->txd_done) {
/* No current txd associated with this channel */
dev_dbg(d->slave.dev, "pchan %u: free\n", p->num);
/* Mark this channel free */
c->phy = NULL;
p->vchan = NULL;
}
}
spin_unlock_irq(&c->lock);
}
spin_lock_irq(&d->lock);
for (pch = 0; pch < NR_PHY_CHAN; pch++) {
p = &d->phy[pch];
if (p->vchan == NULL && !list_empty(&d->chan_pending)) {
c = list_first_entry(&d->chan_pending,
struct sa11x0_dma_chan, node);
list_del_init(&c->node);
pch_alloc |= 1 << pch;
/* Mark this channel allocated */
p->vchan = c;
dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, c);
}
}
spin_unlock_irq(&d->lock);
for (pch = 0; pch < NR_PHY_CHAN; pch++) {
if (pch_alloc & (1 << pch)) {
p = &d->phy[pch];
c = p->vchan;
spin_lock_irq(&c->lock);
c->phy = p;
sa11x0_dma_start_txd(c);
spin_unlock_irq(&c->lock);
}
}
/* Now free the completed tx descriptor, and call their callbacks */
list_for_each_entry_safe(txd, txn, &head, node) {
dma_async_tx_callback callback = txd->tx.callback;
void *callback_param = txd->tx.callback_param;
dev_dbg(d->slave.dev, "txd %p[%x]: callback and free\n",
txd, txd->tx.cookie);
kfree(txd);
if (callback)
callback(callback_param);
}
dev_dbg(d->slave.dev, "tasklet exit\n");
}
static void sa11x0_dma_desc_free(struct sa11x0_dma_dev *d, struct list_head *head)
{
struct sa11x0_dma_desc *txd, *txn;
list_for_each_entry_safe(txd, txn, head, node) {
dev_dbg(d->slave.dev, "txd %p: freeing\n", txd);
kfree(txd);
}
}
static int sa11x0_dma_alloc_chan_resources(struct dma_chan *chan)
{
return 0;
}
static void sa11x0_dma_free_chan_resources(struct dma_chan *chan)
{
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
unsigned long flags;
LIST_HEAD(head);
spin_lock_irqsave(&c->lock, flags);
spin_lock(&d->lock);
list_del_init(&c->node);
spin_unlock(&d->lock);
list_splice_tail_init(&c->desc_submitted, &head);
list_splice_tail_init(&c->desc_issued, &head);
spin_unlock_irqrestore(&c->lock, flags);
sa11x0_dma_desc_free(d, &head);
}
static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p)
{
unsigned reg;
u32 dcsr;
dcsr = readl_relaxed(p->base + DMA_DCSR_R);
if ((dcsr & (DCSR_BIU | DCSR_STRTA)) == DCSR_STRTA ||
(dcsr & (DCSR_BIU | DCSR_STRTB)) == DCSR_BIU)
reg = DMA_DBSA;
else
reg = DMA_DBSB;
return readl_relaxed(p->base + reg);
}
static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan,
dma_cookie_t cookie, struct dma_tx_state *state)
{
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
struct sa11x0_dma_phy *p;
struct sa11x0_dma_desc *txd;
dma_cookie_t last_used, last_complete;
unsigned long flags;
enum dma_status ret;
size_t bytes = 0;
last_used = c->chan.cookie;
last_complete = c->lc;
ret = dma_async_is_complete(cookie, last_complete, last_used);
if (ret == DMA_SUCCESS) {
dma_set_tx_state(state, last_complete, last_used, 0);
return ret;
}
spin_lock_irqsave(&c->lock, flags);
p = c->phy;
ret = c->status;
if (p) {
dma_addr_t addr = sa11x0_dma_pos(p);
dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr);
txd = p->txd_done;
if (txd) {
unsigned i;
for (i = 0; i < txd->sglen; i++) {
dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n",
i, txd->sg[i].addr, txd->sg[i].len);
if (addr >= txd->sg[i].addr &&
addr < txd->sg[i].addr + txd->sg[i].len) {
unsigned len;
len = txd->sg[i].len -
(addr - txd->sg[i].addr);
dev_vdbg(d->slave.dev, "tx_status: [%u] +%x\n",
i, len);
bytes += len;
i++;
break;
}
}
for (; i < txd->sglen; i++) {
dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x ++\n",
i, txd->sg[i].addr, txd->sg[i].len);
bytes += txd->sg[i].len;
}
}
if (txd != p->txd_load && p->txd_load)
bytes += p->txd_load->size;
}
list_for_each_entry(txd, &c->desc_issued, node) {
bytes += txd->size;
}
spin_unlock_irqrestore(&c->lock, flags);
dma_set_tx_state(state, last_complete, last_used, bytes);
dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes);
return ret;
}
/*
* Move pending txds to the issued list, and re-init pending list.
* If not already pending, add this channel to the list of pending
* channels and trigger the tasklet to run.
*/
static void sa11x0_dma_issue_pending(struct dma_chan *chan)
{
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
unsigned long flags;
spin_lock_irqsave(&c->lock, flags);
list_splice_tail_init(&c->desc_submitted, &c->desc_issued);
if (!list_empty(&c->desc_issued)) {
spin_lock(&d->lock);
if (!c->phy && list_empty(&c->node)) {
list_add_tail(&c->node, &d->chan_pending);
tasklet_schedule(&d->task);
dev_dbg(d->slave.dev, "vchan %p: issued\n", c);
}
spin_unlock(&d->lock);
} else
dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", c);
spin_unlock_irqrestore(&c->lock, flags);
}
static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(tx->chan);
struct sa11x0_dma_desc *txd = to_sa11x0_dma_tx(tx);
unsigned long flags;
spin_lock_irqsave(&c->lock, flags);
c->chan.cookie += 1;
if (c->chan.cookie < 0)
c->chan.cookie = 1;
txd->tx.cookie = c->chan.cookie;
list_add_tail(&txd->node, &c->desc_submitted);
spin_unlock_irqrestore(&c->lock, flags);
dev_dbg(tx->chan->device->dev, "vchan %p: txd %p[%x]: submitted\n",
c, txd, txd->tx.cookie);
return txd->tx.cookie;
}
static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg(
struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen,
enum dma_transfer_direction dir, unsigned long flags)
{
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
struct sa11x0_dma_desc *txd;
struct scatterlist *sgent;
unsigned i, j = sglen;
size_t size = 0;
/* SA11x0 channels can only operate in their native direction */
if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) {
dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n",
c, c->ddar, dir);
return NULL;
}
/* Do not allow zero-sized txds */
if (sglen == 0)
return NULL;
for_each_sg(sg, sgent, sglen, i) {
dma_addr_t addr = sg_dma_address(sgent);
unsigned int len = sg_dma_len(sgent);
if (len > DMA_MAX_SIZE)
j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1;
if (addr & DMA_ALIGN) {
dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %08x\n",
c, addr);
return NULL;
}
}
txd = kzalloc(sizeof(*txd) + j * sizeof(txd->sg[0]), GFP_ATOMIC);
if (!txd) {
dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", c);
return NULL;
}
j = 0;
for_each_sg(sg, sgent, sglen, i) {
dma_addr_t addr = sg_dma_address(sgent);
unsigned len = sg_dma_len(sgent);
size += len;
do {
unsigned tlen = len;
/*
* Check whether the transfer will fit. If not, try
* to split the transfer up such that we end up with
* equal chunks - but make sure that we preserve the
* alignment. This avoids small segments.
*/
if (tlen > DMA_MAX_SIZE) {
unsigned mult = DIV_ROUND_UP(tlen,
DMA_MAX_SIZE & ~DMA_ALIGN);
tlen = (tlen / mult) & ~DMA_ALIGN;
}
txd->sg[j].addr = addr;
txd->sg[j].len = tlen;
addr += tlen;
len -= tlen;
j++;
} while (len);
}
dma_async_tx_descriptor_init(&txd->tx, &c->chan);
txd->tx.flags = flags;
txd->tx.tx_submit = sa11x0_dma_tx_submit;
txd->ddar = c->ddar;
txd->size = size;
txd->sglen = j;
dev_dbg(chan->device->dev, "vchan %p: txd %p: size %u nr %u\n",
c, txd, txd->size, txd->sglen);
return &txd->tx;
}
static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg)
{
u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW);
dma_addr_t addr;
enum dma_slave_buswidth width;
u32 maxburst;
if (ddar & DDAR_RW) {
addr = cfg->src_addr;
width = cfg->src_addr_width;
maxburst = cfg->src_maxburst;
} else {
addr = cfg->dst_addr;
width = cfg->dst_addr_width;
maxburst = cfg->dst_maxburst;
}
if ((width != DMA_SLAVE_BUSWIDTH_1_BYTE &&
width != DMA_SLAVE_BUSWIDTH_2_BYTES) ||
(maxburst != 4 && maxburst != 8))
return -EINVAL;
if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
ddar |= DDAR_DW;
if (maxburst == 8)
ddar |= DDAR_BS;
dev_dbg(c->chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n",
c, addr, width, maxburst);
c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6;
return 0;
}
static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg)
{
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
struct sa11x0_dma_phy *p;
LIST_HEAD(head);
unsigned long flags;
int ret;
switch (cmd) {
case DMA_SLAVE_CONFIG:
return sa11x0_dma_slave_config(c, (struct dma_slave_config *)arg);
case DMA_TERMINATE_ALL:
dev_dbg(d->slave.dev, "vchan %p: terminate all\n", c);
/* Clear the tx descriptor lists */
spin_lock_irqsave(&c->lock, flags);
list_splice_tail_init(&c->desc_submitted, &head);
list_splice_tail_init(&c->desc_issued, &head);
p = c->phy;
if (p) {
struct sa11x0_dma_desc *txd, *txn;
dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num);
/* vchan is assigned to a pchan - stop the channel */
writel(DCSR_RUN | DCSR_IE |
DCSR_STRTA | DCSR_DONEA |
DCSR_STRTB | DCSR_DONEB,
p->base + DMA_DCSR_C);
list_for_each_entry_safe(txd, txn, &d->desc_complete, node)
if (txd->tx.chan == &c->chan)
list_move(&txd->node, &head);
if (p->txd_load) {
if (p->txd_load != p->txd_done)
list_add_tail(&p->txd_load->node, &head);
p->txd_load = NULL;
}
if (p->txd_done) {
list_add_tail(&p->txd_done->node, &head);
p->txd_done = NULL;
}
c->phy = NULL;
spin_lock(&d->lock);
p->vchan = NULL;
spin_unlock(&d->lock);
tasklet_schedule(&d->task);
}
spin_unlock_irqrestore(&c->lock, flags);
sa11x0_dma_desc_free(d, &head);
ret = 0;
break;
case DMA_PAUSE:
dev_dbg(d->slave.dev, "vchan %p: pause\n", c);
spin_lock_irqsave(&c->lock, flags);
if (c->status == DMA_IN_PROGRESS) {
c->status = DMA_PAUSED;
p = c->phy;
if (p) {
writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
} else {
spin_lock(&d->lock);
list_del_init(&c->node);
spin_unlock(&d->lock);
}
}
spin_unlock_irqrestore(&c->lock, flags);
ret = 0;
break;
case DMA_RESUME:
dev_dbg(d->slave.dev, "vchan %p: resume\n", c);
spin_lock_irqsave(&c->lock, flags);
if (c->status == DMA_PAUSED) {
c->status = DMA_IN_PROGRESS;
p = c->phy;
if (p) {
writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S);
} else if (!list_empty(&c->desc_issued)) {
spin_lock(&d->lock);
list_add_tail(&c->node, &d->chan_pending);
spin_unlock(&d->lock);
}
}
spin_unlock_irqrestore(&c->lock, flags);
ret = 0;
break;
default:
ret = -ENXIO;
break;
}
return ret;
}
struct sa11x0_dma_channel_desc {
u32 ddar;
const char *name;
};
#define CD(d1, d2) { .ddar = DDAR_##d1 | d2, .name = #d1 }
static const struct sa11x0_dma_channel_desc chan_desc[] = {
CD(Ser0UDCTr, 0),
CD(Ser0UDCRc, DDAR_RW),
CD(Ser1SDLCTr, 0),
CD(Ser1SDLCRc, DDAR_RW),
CD(Ser1UARTTr, 0),
CD(Ser1UARTRc, DDAR_RW),
CD(Ser2ICPTr, 0),
CD(Ser2ICPRc, DDAR_RW),
CD(Ser3UARTTr, 0),
CD(Ser3UARTRc, DDAR_RW),
CD(Ser4MCP0Tr, 0),
CD(Ser4MCP0Rc, DDAR_RW),
CD(Ser4MCP1Tr, 0),
CD(Ser4MCP1Rc, DDAR_RW),
CD(Ser4SSPTr, 0),
CD(Ser4SSPRc, DDAR_RW),
};
static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev,
struct device *dev)
{
unsigned i;
dmadev->chancnt = ARRAY_SIZE(chan_desc);
INIT_LIST_HEAD(&dmadev->channels);
dmadev->dev = dev;
dmadev->device_alloc_chan_resources = sa11x0_dma_alloc_chan_resources;
dmadev->device_free_chan_resources = sa11x0_dma_free_chan_resources;
dmadev->device_control = sa11x0_dma_control;
dmadev->device_tx_status = sa11x0_dma_tx_status;
dmadev->device_issue_pending = sa11x0_dma_issue_pending;
for (i = 0; i < dmadev->chancnt; i++) {
struct sa11x0_dma_chan *c;
c = kzalloc(sizeof(*c), GFP_KERNEL);
if (!c) {
dev_err(dev, "no memory for channel %u\n", i);
return -ENOMEM;
}
c->chan.device = dmadev;
c->status = DMA_IN_PROGRESS;
c->ddar = chan_desc[i].ddar;
c->name = chan_desc[i].name;
spin_lock_init(&c->lock);
INIT_LIST_HEAD(&c->desc_submitted);
INIT_LIST_HEAD(&c->desc_issued);
INIT_LIST_HEAD(&c->node);
list_add_tail(&c->chan.device_node, &dmadev->channels);
}
return dma_async_device_register(dmadev);
}
static int sa11x0_dma_request_irq(struct platform_device *pdev, int nr,
void *data)
{
int irq = platform_get_irq(pdev, nr);
if (irq <= 0)
return -ENXIO;
return request_irq(irq, sa11x0_dma_irq, 0, dev_name(&pdev->dev), data);
}
static void sa11x0_dma_free_irq(struct platform_device *pdev, int nr,
void *data)
{
int irq = platform_get_irq(pdev, nr);
if (irq > 0)
free_irq(irq, data);
}
static void sa11x0_dma_free_channels(struct dma_device *dmadev)
{
struct sa11x0_dma_chan *c, *cn;
list_for_each_entry_safe(c, cn, &dmadev->channels, chan.device_node) {
list_del(&c->chan.device_node);
kfree(c);
}
}
static int __devinit sa11x0_dma_probe(struct platform_device *pdev)
{
struct sa11x0_dma_dev *d;
struct resource *res;
unsigned i;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENXIO;
d = kzalloc(sizeof(*d), GFP_KERNEL);
if (!d) {
ret = -ENOMEM;
goto err_alloc;
}
spin_lock_init(&d->lock);
INIT_LIST_HEAD(&d->chan_pending);
INIT_LIST_HEAD(&d->desc_complete);
d->base = ioremap(res->start, resource_size(res));
if (!d->base) {
ret = -ENOMEM;
goto err_ioremap;
}
tasklet_init(&d->task, sa11x0_dma_tasklet, (unsigned long)d);
for (i = 0; i < NR_PHY_CHAN; i++) {
struct sa11x0_dma_phy *p = &d->phy[i];
p->dev = d;
p->num = i;
p->base = d->base + i * DMA_SIZE;
writel_relaxed(DCSR_RUN | DCSR_IE | DCSR_ERROR |
DCSR_DONEA | DCSR_STRTA | DCSR_DONEB | DCSR_STRTB,
p->base + DMA_DCSR_C);
writel_relaxed(0, p->base + DMA_DDAR);
ret = sa11x0_dma_request_irq(pdev, i, p);
if (ret) {
while (i) {
i--;
sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
}
goto err_irq;
}
}
dma_cap_set(DMA_SLAVE, d->slave.cap_mask);
d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg;
ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev);
if (ret) {
dev_warn(d->slave.dev, "failed to register slave async device: %d\n",
ret);
goto err_slave_reg;
}
platform_set_drvdata(pdev, d);
return 0;
err_slave_reg:
sa11x0_dma_free_channels(&d->slave);
for (i = 0; i < NR_PHY_CHAN; i++)
sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
err_irq:
tasklet_kill(&d->task);
iounmap(d->base);
err_ioremap:
kfree(d);
err_alloc:
return ret;
}
static int __devexit sa11x0_dma_remove(struct platform_device *pdev)
{
struct sa11x0_dma_dev *d = platform_get_drvdata(pdev);
unsigned pch;
dma_async_device_unregister(&d->slave);
sa11x0_dma_free_channels(&d->slave);
for (pch = 0; pch < NR_PHY_CHAN; pch++)
sa11x0_dma_free_irq(pdev, pch, &d->phy[pch]);
tasklet_kill(&d->task);
iounmap(d->base);
kfree(d);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int sa11x0_dma_suspend(struct device *dev)
{
struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
unsigned pch;
for (pch = 0; pch < NR_PHY_CHAN; pch++) {
struct sa11x0_dma_phy *p = &d->phy[pch];
u32 dcsr, saved_dcsr;
dcsr = saved_dcsr = readl_relaxed(p->base + DMA_DCSR_R);
if (dcsr & DCSR_RUN) {
writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
dcsr = readl_relaxed(p->base + DMA_DCSR_R);
}
saved_dcsr &= DCSR_RUN | DCSR_IE;
if (dcsr & DCSR_BIU) {
p->dbs[0] = readl_relaxed(p->base + DMA_DBSB);
p->dbt[0] = readl_relaxed(p->base + DMA_DBTB);
p->dbs[1] = readl_relaxed(p->base + DMA_DBSA);
p->dbt[1] = readl_relaxed(p->base + DMA_DBTA);
saved_dcsr |= (dcsr & DCSR_STRTA ? DCSR_STRTB : 0) |
(dcsr & DCSR_STRTB ? DCSR_STRTA : 0);
} else {
p->dbs[0] = readl_relaxed(p->base + DMA_DBSA);
p->dbt[0] = readl_relaxed(p->base + DMA_DBTA);
p->dbs[1] = readl_relaxed(p->base + DMA_DBSB);
p->dbt[1] = readl_relaxed(p->base + DMA_DBTB);
saved_dcsr |= dcsr & (DCSR_STRTA | DCSR_STRTB);
}
p->dcsr = saved_dcsr;
writel(DCSR_STRTA | DCSR_STRTB, p->base + DMA_DCSR_C);
}
return 0;
}
static int sa11x0_dma_resume(struct device *dev)
{
struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
unsigned pch;
for (pch = 0; pch < NR_PHY_CHAN; pch++) {
struct sa11x0_dma_phy *p = &d->phy[pch];
struct sa11x0_dma_desc *txd = NULL;
u32 dcsr = readl_relaxed(p->base + DMA_DCSR_R);
WARN_ON(dcsr & (DCSR_BIU | DCSR_STRTA | DCSR_STRTB | DCSR_RUN));
if (p->txd_done)
txd = p->txd_done;
else if (p->txd_load)
txd = p->txd_load;
if (!txd)
continue;
writel_relaxed(txd->ddar, p->base + DMA_DDAR);
writel_relaxed(p->dbs[0], p->base + DMA_DBSA);
writel_relaxed(p->dbt[0], p->base + DMA_DBTA);
writel_relaxed(p->dbs[1], p->base + DMA_DBSB);
writel_relaxed(p->dbt[1], p->base + DMA_DBTB);
writel_relaxed(p->dcsr, p->base + DMA_DCSR_S);
}
return 0;
}
#endif
static const struct dev_pm_ops sa11x0_dma_pm_ops = {
.suspend_noirq = sa11x0_dma_suspend,
.resume_noirq = sa11x0_dma_resume,
.freeze_noirq = sa11x0_dma_suspend,
.thaw_noirq = sa11x0_dma_resume,
.poweroff_noirq = sa11x0_dma_suspend,
.restore_noirq = sa11x0_dma_resume,
};
static struct platform_driver sa11x0_dma_driver = {
.driver = {
.name = "sa11x0-dma",
.owner = THIS_MODULE,
.pm = &sa11x0_dma_pm_ops,
},
.probe = sa11x0_dma_probe,
.remove = __devexit_p(sa11x0_dma_remove),
};
bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param)
{
if (chan->device->dev->driver == &sa11x0_dma_driver.driver) {
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
const char *p = param;
return !strcmp(c->name, p);
}
return false;
}
EXPORT_SYMBOL(sa11x0_dma_filter_fn);
static int __init sa11x0_dma_init(void)
{
return platform_driver_register(&sa11x0_dma_driver);
}
subsys_initcall(sa11x0_dma_init);
static void __exit sa11x0_dma_exit(void)
{
platform_driver_unregister(&sa11x0_dma_driver);
}
module_exit(sa11x0_dma_exit);
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("SA-11x0 DMA driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:sa11x0-dma");
drivers/net/irda/Kconfig
View file @ 277dc7ae
......@@ -356,7 +356,7 @@ config VLSI_FIR
config SA1100_FIR
tristate "SA1100 Internal IR"
depends on ARCH_SA1100 && IRDA
depends on ARCH_SA1100 && IRDA && DMA_SA11X0
config VIA_FIR
tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
......
drivers/net/irda/sa1100_ir.c
View file @ 277dc7ae
......@@ -15,7 +15,7 @@
* This driver takes one kernel command line parameter, sa1100ir=, with
* the following options:
* max_rate:baudrate - set the maximum baud rate
* power_leve:level - set the transmitter power level
* power_level:level - set the transmitter power level
* tx_lpm:0|1 - set transmit low power mode
*/
#include <linux/module.h>
......@@ -30,13 +30,13 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/sa11x0-dma.h>
#include <net/irda/irda.h>
#include <net/irda/wrapper.h>
#include <net/irda/irda_device.h>
#include <asm/irq.h>
#include <mach/dma.h>
#include <mach/hardware.h>
#include <asm/mach/irda.h>
......@@ -44,8 +44,15 @@ static int power_level = 3;
static int tx_lpm;
static int max_rate = 4000000;
struct sa1100_buf {
struct device *dev;
struct sk_buff *skb;
struct scatterlist sg;
struct dma_chan *chan;
dma_cookie_t cookie;
};
struct sa1100_irda {
unsigned char hscr0;
unsigned char utcr4;
unsigned char power;
unsigned char open;
......@@ -53,12 +60,8 @@ struct sa1100_irda {
int speed;
int newspeed;
struct sk_buff *txskb;
struct sk_buff *rxskb;
dma_addr_t txbuf_dma;
dma_addr_t rxbuf_dma;
dma_regs_t *txdma;
dma_regs_t *rxdma;
struct sa1100_buf dma_rx;
struct sa1100_buf dma_tx;
struct device *dev;
struct irda_platform_data *pdata;
......@@ -67,23 +70,103 @@ struct sa1100_irda {
iobuff_t tx_buff;
iobuff_t rx_buff;
int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *);
irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *);
};
static int sa1100_irda_set_speed(struct sa1100_irda *, int);
#define IS_FIR(si) ((si)->speed >= 4000000)
#define HPSIR_MAX_RXLEN 2047
static struct dma_slave_config sa1100_irda_sir_tx = {
.direction = DMA_TO_DEVICE,
.dst_addr = __PREG(Ser2UTDR),
.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.dst_maxburst = 4,
};
static struct dma_slave_config sa1100_irda_fir_rx = {
.direction = DMA_FROM_DEVICE,
.src_addr = __PREG(Ser2HSDR),
.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.src_maxburst = 8,
};
static struct dma_slave_config sa1100_irda_fir_tx = {
.direction = DMA_TO_DEVICE,
.dst_addr = __PREG(Ser2HSDR),
.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.dst_maxburst = 8,
};
static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf)
{
struct dma_chan *chan = buf->chan;
struct dma_tx_state state;
enum dma_status status;
status = chan->device->device_tx_status(chan, buf->cookie, &state);
if (status != DMA_PAUSED)
return 0;
return sg_dma_len(&buf->sg) - state.residue;
}
static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf,
const char *name, struct dma_slave_config *cfg)
{
dma_cap_mask_t m;
int ret;
dma_cap_zero(m);
dma_cap_set(DMA_SLAVE, m);
buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name);
if (!buf->chan) {
dev_err(dev, "unable to request DMA channel for %s\n",
name);
return -ENOENT;
}
ret = dmaengine_slave_config(buf->chan, cfg);
if (ret)
dev_warn(dev, "DMA slave_config for %s returned %d\n",
name, ret);
buf->dev = buf->chan->device->dev;
return 0;
}
static void sa1100_irda_dma_start(struct sa1100_buf *buf,
enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p)
{
struct dma_async_tx_descriptor *desc;
struct dma_chan *chan = buf->chan;
desc = chan->device->device_prep_slave_sg(chan, &buf->sg, 1, dir,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (desc) {
desc->callback = cb;
desc->callback_param = cb_p;
buf->cookie = dmaengine_submit(desc);
dma_async_issue_pending(chan);
}
}
/*
* Allocate and map the receive buffer, unless it is already allocated.
*/
static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
{
if (si->rxskb)
if (si->dma_rx.skb)
return 0;
si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
if (!si->rxskb) {
si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
if (!si->dma_rx.skb) {
printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
return -ENOMEM;
}
......@@ -92,11 +175,14 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
* Align any IP headers that may be contained
* within the frame.
*/
skb_reserve(si->rxskb, 1);
skb_reserve(si->dma_rx.skb, 1);
sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN);
if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) {
dev_kfree_skb_any(si->dma_rx.skb);
return -ENOMEM;
}
si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
HPSIR_MAX_RXLEN,
DMA_FROM_DEVICE);
return 0;
}
......@@ -106,7 +192,7 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
*/
static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
{
if (!si->rxskb) {
if (!si->dma_rx.skb) {
printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
return;
}
......@@ -114,254 +200,87 @@ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
/*
* First empty receive FIFO
*/
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
Ser2HSCR0 = HSCR0_HSSP;
/*
* Enable the DMA, receiver and receive interrupt.
*/
sa1100_clear_dma(si->rxdma);
sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN);
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE;
dmaengine_terminate_all(si->dma_rx.chan);
sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL);
Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE;
}
/*
* Set the IrDA communications speed.
*/
static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
static void sa1100_irda_check_speed(struct sa1100_irda *si)
{
unsigned long flags;
int brd, ret = -EINVAL;
switch (speed) {
case 9600: case 19200: case 38400:
case 57600: case 115200:
brd = 3686400 / (16 * speed) - 1;
/*
* Stop the receive DMA.
*/
if (IS_FIR(si))
sa1100_stop_dma(si->rxdma);
local_irq_save(flags);
Ser2UTCR3 = 0;
Ser2HSCR0 = HSCR0_UART;
Ser2UTCR1 = brd >> 8;
Ser2UTCR2 = brd;
/*
* Clear status register
*/
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
if (si->pdata->set_speed)
si->pdata->set_speed(si->dev, speed);
si->speed = speed;
local_irq_restore(flags);
ret = 0;
break;
case 4000000:
local_irq_save(flags);
si->hscr0 = 0;
Ser2HSSR0 = 0xff;
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
Ser2UTCR3 = 0;
si->speed = speed;
if (si->pdata->set_speed)
si->pdata->set_speed(si->dev, speed);
sa1100_irda_rx_alloc(si);
sa1100_irda_rx_dma_start(si);
local_irq_restore(flags);
break;
default:
break;
if (si->newspeed) {
sa1100_irda_set_speed(si, si->newspeed);
si->newspeed = 0;
}
return ret;
}
/*
* Control the power state of the IrDA transmitter.
* State:
* 0 - off
* 1 - short range, lowest power
* 2 - medium range, medium power
* 3 - maximum range, high power
*
* Currently, only assabet is known to support this.
* HP-SIR format support.
*/
static int
__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
{
int ret = 0;
if (si->pdata->set_power)
ret = si->pdata->set_power(si->dev, state);
return ret;
}
static inline int
sa1100_set_power(struct sa1100_irda *si, unsigned int state)
{
int ret;
ret = __sa1100_irda_set_power(si, state);
if (ret == 0)
si->power = state;
return ret;
}
static int sa1100_irda_startup(struct sa1100_irda *si)
static void sa1100_irda_sirtxdma_irq(void *id)
{
int ret;
struct net_device *dev = id;
struct sa1100_irda *si = netdev_priv(dev);
/*
* Ensure that the ports for this device are setup correctly.
*/
if (si->pdata->startup) {
ret = si->pdata->startup(si->dev);
if (ret)
return ret;
}
dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE);
dev_kfree_skb(si->dma_tx.skb);
si->dma_tx.skb = NULL;
/*
* Configure PPC for IRDA - we want to drive TXD2 low.
* We also want to drive this pin low during sleep.
*/
PPSR &= ~PPC_TXD2;
PSDR &= ~PPC_TXD2;
PPDR |= PPC_TXD2;
dev->stats.tx_packets++;
dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg);
/*
* Enable HP-SIR modulation, and ensure that the port is disabled.
*/
Ser2UTCR3 = 0;
Ser2HSCR0 = HSCR0_UART;
Ser2UTCR4 = si->utcr4;
Ser2UTCR0 = UTCR0_8BitData;
Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
/* We need to ensure that the transmitter has finished. */
do
rmb();
while (Ser2UTSR1 & UTSR1_TBY);
/*
* Clear status register
* Ok, we've finished transmitting. Now enable the receiver.
* Sometimes we get a receive IRQ immediately after a transmit...
*/
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
ret = sa1100_irda_set_speed(si, si->speed = 9600);
if (ret) {
Ser2UTCR3 = 0;
Ser2HSCR0 = 0;
if (si->pdata->shutdown)
si->pdata->shutdown(si->dev);
}
return ret;
}
static void sa1100_irda_shutdown(struct sa1100_irda *si)
{
/*
* Stop all DMA activity.
*/
sa1100_stop_dma(si->rxdma);
sa1100_stop_dma(si->txdma);
/* Disable the port. */
Ser2UTCR3 = 0;
Ser2HSCR0 = 0;
if (si->pdata->shutdown)
si->pdata->shutdown(si->dev);
}
#ifdef CONFIG_PM
/*
* Suspend the IrDA interface.
*/
static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct sa1100_irda *si;
if (!dev)
return 0;
sa1100_irda_check_speed(si);
si = netdev_priv(dev);
if (si->open) {
/*
* Stop the transmit queue
*/
netif_device_detach(dev);
disable_irq(dev->irq);
sa1100_irda_shutdown(si);
__sa1100_irda_set_power(si, 0);
}
return 0;
/* I'm hungry! */
netif_wake_queue(dev);
}
/*
* Resume the IrDA interface.
*/
static int sa1100_irda_resume(struct platform_device *pdev)
static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev,
struct sa1100_irda *si)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct sa1100_irda *si;
if (!dev)
return 0;
si->tx_buff.data = si->tx_buff.head;
si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data,
si->tx_buff.truesize);
si = netdev_priv(dev);
if (si->open) {
/*
* If we missed a speed change, initialise at the new speed
* directly. It is debatable whether this is actually
* required, but in the interests of continuing from where
* we left off it is desirable. The converse argument is
* that we should re-negotiate at 9600 baud again.
*/
if (si->newspeed) {
si->speed = si->newspeed;
si->newspeed = 0;
si->dma_tx.skb = skb;
sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len);
if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
si->dma_tx.skb = NULL;
netif_wake_queue(dev);
dev->stats.tx_dropped++;
return NETDEV_TX_OK;
}
sa1100_irda_startup(si);
__sa1100_irda_set_power(si, si->power);
enable_irq(dev->irq);
sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev);
/*
* This automatically wakes up the queue
* The mean turn-around time is enforced by XBOF padding,
* so we don't have to do anything special here.
*/
netif_device_attach(dev);
}
Ser2UTCR3 = UTCR3_TXE;
return 0;
return NETDEV_TX_OK;
}
#else
#define sa1100_irda_suspend NULL
#define sa1100_irda_resume NULL
#endif
/*
* HP-SIR format interrupt service routines.
*/
static void sa1100_irda_hpsir_irq(struct net_device *dev)
static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si)
{
struct sa1100_irda *si = netdev_priv(dev);
int status;
status = Ser2UTSR0;
......@@ -414,51 +333,96 @@ static void sa1100_irda_hpsir_irq(struct net_device *dev)
}
if (status & UTSR0_TFS && si->tx_buff.len) {
/*
* Transmitter FIFO is not full
*/
do {
Ser2UTDR = *si->tx_buff.data++;
si->tx_buff.len -= 1;
} while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len);
return IRQ_HANDLED;
}
if (si->tx_buff.len == 0) {
dev->stats.tx_packets++;
dev->stats.tx_bytes += si->tx_buff.data -
si->tx_buff.head;
/*
* FIR format support.
*/
static void sa1100_irda_firtxdma_irq(void *id)
{
struct net_device *dev = id;
struct sa1100_irda *si = netdev_priv(dev);
struct sk_buff *skb;
/*
* We need to ensure that the transmitter has
* finished.
* Wait for the transmission to complete. Unfortunately,
* the hardware doesn't give us an interrupt to indicate
* "end of frame".
*/
do
rmb();
while (Ser2UTSR1 & UTSR1_TBY);
while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
/*
* Ok, we've finished transmitting. Now enable
* the receiver. Sometimes we get a receive IRQ
* immediately after a transmit...
* Clear the transmit underrun bit.
*/
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
Ser2HSSR0 = HSSR0_TUR;
if (si->newspeed) {
sa1100_irda_set_speed(si, si->newspeed);
si->newspeed = 0;
/*
* Do we need to change speed? Note that we're lazy
* here - we don't free the old dma_rx.skb. We don't need
* to allocate a buffer either.
*/
sa1100_irda_check_speed(si);
/*
* Start reception. This disables the transmitter for
* us. This will be using the existing RX buffer.
*/
sa1100_irda_rx_dma_start(si);
/* Account and free the packet. */
skb = si->dma_tx.skb;
if (skb) {
dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
DMA_TO_DEVICE);
dev->stats.tx_packets ++;
dev->stats.tx_bytes += skb->len;
dev_kfree_skb_irq(skb);
si->dma_tx.skb = NULL;
}
/* I'm hungry! */
/*
* Make sure that the TX queue is available for sending
* (for retries). TX has priority over RX at all times.
*/
netif_wake_queue(dev);
}
static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev,
struct sa1100_irda *si)
{
int mtt = irda_get_mtt(skb);
si->dma_tx.skb = skb;
sg_set_buf(&si->dma_tx.sg, skb->data, skb->len);
if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
si->dma_tx.skb = NULL;
netif_wake_queue(dev);
dev->stats.tx_dropped++;
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
}
sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev);
/*
* If we have a mean turn-around time, impose the specified
* specified delay. We could shorten this by timing from
* the point we received the packet.
*/
if (mtt)
udelay(mtt);
Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE;
return NETDEV_TX_OK;
}
static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
{
struct sk_buff *skb = si->rxskb;
dma_addr_t dma_addr;
struct sk_buff *skb = si->dma_rx.skb;
unsigned int len, stat, data;
if (!skb) {
......@@ -469,11 +433,10 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
/*
* Get the current data position.
*/
dma_addr = sa1100_get_dma_pos(si->rxdma);
len = dma_addr - si->rxbuf_dma;
len = sa1100_irda_dma_xferred(&si->dma_rx);
if (len > HPSIR_MAX_RXLEN)
len = HPSIR_MAX_RXLEN;
dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE);
dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
do {
/*
......@@ -501,7 +464,7 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
} while (Ser2HSSR0 & HSSR0_EIF);
if (stat & HSSR1_EOF) {
si->rxskb = NULL;
si->dma_rx.skb = NULL;
skb_put(skb, len);
skb->dev = dev;
......@@ -518,28 +481,23 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
netif_rx(skb);
} else {
/*
* Remap the buffer.
* Remap the buffer - it was previously mapped, and we
* hope that this succeeds.
*/
si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
HPSIR_MAX_RXLEN,
DMA_FROM_DEVICE);
dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
}
}
/*
* FIR format interrupt service routine. We only have to
* handle RX events; transmit events go via the TX DMA handler.
*
* No matter what, we disable RX, process, and the restart RX.
* We only have to handle RX events here; transmit events go via the TX
* DMA handler. We disable RX, process, and the restart RX.
*/
static void sa1100_irda_fir_irq(struct net_device *dev)
static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si)
{
struct sa1100_irda *si = netdev_priv(dev);
/*
* Stop RX DMA
*/
sa1100_stop_dma(si->rxdma);
dmaengine_pause(si->dma_rx.chan);
/*
* Framing error - we throw away the packet completely.
......@@ -555,7 +513,7 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
/*
* Clear out the DMA...
*/
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
Ser2HSCR0 = HSCR0_HSSP;
/*
* Clear selected status bits now, so we
......@@ -573,78 +531,128 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
if (Ser2HSSR0 & HSSR0_EIF)
sa1100_irda_fir_error(si, dev);
/*
* No matter what happens, we must restart reception.
*/
sa1100_irda_rx_dma_start(si);
/*
* No matter what happens, we must restart reception.
*/
sa1100_irda_rx_dma_start(si);
return IRQ_HANDLED;
}
/*
* Set the IrDA communications speed.
*/
static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
{
unsigned long flags;
int brd, ret = -EINVAL;
switch (speed) {
case 9600: case 19200: case 38400:
case 57600: case 115200:
brd = 3686400 / (16 * speed) - 1;
/* Stop the receive DMA, and configure transmit. */
if (IS_FIR(si)) {
dmaengine_terminate_all(si->dma_rx.chan);
dmaengine_slave_config(si->dma_tx.chan,
&sa1100_irda_sir_tx);
}
local_irq_save(flags);
Ser2UTCR3 = 0;
Ser2HSCR0 = HSCR0_UART;
Ser2UTCR1 = brd >> 8;
Ser2UTCR2 = brd;
/*
* Clear status register
*/
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
if (si->pdata->set_speed)
si->pdata->set_speed(si->dev, speed);
si->speed = speed;
si->tx_start = sa1100_irda_sir_tx_start;
si->irq = sa1100_irda_sir_irq;
local_irq_restore(flags);
ret = 0;
break;
case 4000000:
if (!IS_FIR(si))
dmaengine_slave_config(si->dma_tx.chan,
&sa1100_irda_fir_tx);
local_irq_save(flags);
Ser2HSSR0 = 0xff;
Ser2HSCR0 = HSCR0_HSSP;
Ser2UTCR3 = 0;
si->speed = speed;
si->tx_start = sa1100_irda_fir_tx_start;
si->irq = sa1100_irda_fir_irq;
if (si->pdata->set_speed)
si->pdata->set_speed(si->dev, speed);
sa1100_irda_rx_alloc(si);
sa1100_irda_rx_dma_start(si);
local_irq_restore(flags);
break;
default:
break;
}
return ret;
}
/*
* Control the power state of the IrDA transmitter.
* State:
* 0 - off
* 1 - short range, lowest power
* 2 - medium range, medium power
* 3 - maximum range, high power
*
* Currently, only assabet is known to support this.
*/
static int
__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
{
int ret = 0;
if (si->pdata->set_power)
ret = si->pdata->set_power(si->dev, state);
return ret;
}
static inline int
sa1100_set_power(struct sa1100_irda *si, unsigned int state)
{
int ret;
ret = __sa1100_irda_set_power(si, state);
if (ret == 0)
si->power = state;
return ret;
}
static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
if (IS_FIR(((struct sa1100_irda *)netdev_priv(dev))))
sa1100_irda_fir_irq(dev);
else
sa1100_irda_hpsir_irq(dev);
return IRQ_HANDLED;
}
/*
* TX DMA completion handler.
*/
static void sa1100_irda_txdma_irq(void *id)
{
struct net_device *dev = id;
struct sa1100_irda *si = netdev_priv(dev);
struct sk_buff *skb = si->txskb;
si->txskb = NULL;
/*
* Wait for the transmission to complete. Unfortunately,
* the hardware doesn't give us an interrupt to indicate
* "end of frame".
*/
do
rmb();
while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
/*
* Clear the transmit underrun bit.
*/
Ser2HSSR0 = HSSR0_TUR;
/*
* Do we need to change speed? Note that we're lazy
* here - we don't free the old rxskb. We don't need
* to allocate a buffer either.
*/
if (si->newspeed) {
sa1100_irda_set_speed(si, si->newspeed);
si->newspeed = 0;
}
/*
* Start reception. This disables the transmitter for
* us. This will be using the existing RX buffer.
*/
sa1100_irda_rx_dma_start(si);
/*
* Account and free the packet.
*/
if (skb) {
dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE);
dev->stats.tx_packets ++;
dev->stats.tx_bytes += skb->len;
dev_kfree_skb_irq(skb);
}
/*
* Make sure that the TX queue is available for sending
* (for retries). TX has priority over RX at all times.
*/
netif_wake_queue(dev);
return si->irq(dev, si);
}
static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
......@@ -660,62 +668,19 @@ static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
if (speed != si->speed && speed != -1)
si->newspeed = speed;
/*
* If this is an empty frame, we can bypass a lot.
*/
/* If this is an empty frame, we can bypass a lot. */
if (skb->len == 0) {
if (si->newspeed) {
si->newspeed = 0;
sa1100_irda_set_speed(si, speed);
}
sa1100_irda_check_speed(si);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
if (!IS_FIR(si)) {
netif_stop_queue(dev);
si->tx_buff.data = si->tx_buff.head;
si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data,
si->tx_buff.truesize);
/*
* Set the transmit interrupt enable. This will fire
* off an interrupt immediately. Note that we disable
* the receiver so we won't get spurious characteres
* received.
*/
Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE;
dev_kfree_skb(skb);
} else {
int mtt = irda_get_mtt(skb);
/*
* We must not be transmitting...
*/
BUG_ON(si->txskb);
netif_stop_queue(dev);
si->txskb = skb;
si->txbuf_dma = dma_map_single(si->dev, skb->data,
skb->len, DMA_TO_DEVICE);
/* We must not already have a skb to transmit... */
BUG_ON(si->dma_tx.skb);
sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len);
/*
* If we have a mean turn-around time, impose the specified
* specified delay. We could shorten this by timing from
* the point we received the packet.
*/
if (mtt)
udelay(mtt);
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE;
}
return NETDEV_TX_OK;
return si->tx_start(skb, dev, si);
}
static int
......@@ -762,6 +727,69 @@ sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
return ret;
}
static int sa1100_irda_startup(struct sa1100_irda *si)
{
int ret;
/*
* Ensure that the ports for this device are setup correctly.
*/
if (si->pdata->startup) {
ret = si->pdata->startup(si->dev);
if (ret)
return ret;
}
/*
* Configure PPC for IRDA - we want to drive TXD2 low.
* We also want to drive this pin low during sleep.
*/
PPSR &= ~PPC_TXD2;
PSDR &= ~PPC_TXD2;
PPDR |= PPC_TXD2;
/*
* Enable HP-SIR modulation, and ensure that the port is disabled.
*/
Ser2UTCR3 = 0;
Ser2HSCR0 = HSCR0_UART;
Ser2UTCR4 = si->utcr4;
Ser2UTCR0 = UTCR0_8BitData;
Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
/*
* Clear status register
*/
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
ret = sa1100_irda_set_speed(si, si->speed = 9600);
if (ret) {
Ser2UTCR3 = 0;
Ser2HSCR0 = 0;
if (si->pdata->shutdown)
si->pdata->shutdown(si->dev);
}
return ret;
}
static void sa1100_irda_shutdown(struct sa1100_irda *si)
{
/*
* Stop all DMA activity.
*/
dmaengine_terminate_all(si->dma_rx.chan);
dmaengine_terminate_all(si->dma_tx.chan);
/* Disable the port. */
Ser2UTCR3 = 0;
Ser2HSCR0 = 0;
if (si->pdata->shutdown)
si->pdata->shutdown(si->dev);
}
static int sa1100_irda_start(struct net_device *dev)
{
struct sa1100_irda *si = netdev_priv(dev);
......@@ -769,25 +797,16 @@ static int sa1100_irda_start(struct net_device *dev)
si->speed = 9600;
err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
if (err)
goto err_irq;
err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive",
NULL, NULL, &si->rxdma);
err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc",
&sa1100_irda_fir_rx);
if (err)
goto err_rx_dma;
err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit",
sa1100_irda_txdma_irq, dev, &si->txdma);
err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr",
&sa1100_irda_sir_tx);
if (err)
goto err_tx_dma;
/*
* The interrupt must remain disabled for now.
*/
disable_irq(dev->irq);
/*
* Setup the serial port for the specified speed.
*/
......@@ -803,44 +822,60 @@ static int sa1100_irda_start(struct net_device *dev)
if (!si->irlap)
goto err_irlap;
err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
if (err)
goto err_irq;
/*
* Now enable the interrupt and start the queue
*/
si->open = 1;
sa1100_set_power(si, power_level); /* low power mode */
enable_irq(dev->irq);
netif_start_queue(dev);
return 0;
err_irq:
irlap_close(si->irlap);
err_irlap:
si->open = 0;
sa1100_irda_shutdown(si);
err_startup:
sa1100_free_dma(si->txdma);
dma_release_channel(si->dma_tx.chan);
err_tx_dma:
sa1100_free_dma(si->rxdma);
dma_release_channel(si->dma_rx.chan);
err_rx_dma:
free_irq(dev->irq, dev);
err_irq:
return err;
}
static int sa1100_irda_stop(struct net_device *dev)
{
struct sa1100_irda *si = netdev_priv(dev);
struct sk_buff *skb;
disable_irq(dev->irq);
netif_stop_queue(dev);
si->open = 0;
sa1100_irda_shutdown(si);
/*
* If we have been doing DMA receive, make sure we
* If we have been doing any DMA activity, make sure we
* tidy that up cleanly.
*/
if (si->rxskb) {
dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN,
skb = si->dma_rx.skb;
if (skb) {
dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1,
DMA_FROM_DEVICE);
dev_kfree_skb(si->rxskb);
si->rxskb = NULL;
dev_kfree_skb(skb);
si->dma_rx.skb = NULL;
}
skb = si->dma_tx.skb;
if (skb) {
dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
DMA_TO_DEVICE);
dev_kfree_skb(skb);
si->dma_tx.skb = NULL;
}
/* Stop IrLAP */
......@@ -849,14 +884,11 @@ static int sa1100_irda_stop(struct net_device *dev)
si->irlap = NULL;
}
netif_stop_queue(dev);
si->open = 0;
/*
* Free resources
*/
sa1100_free_dma(si->txdma);
sa1100_free_dma(si->rxdma);
dma_release_channel(si->dma_tx.chan);
dma_release_channel(si->dma_rx.chan);
free_irq(dev->irq, dev);
sa1100_set_power(si, 0);
......@@ -888,11 +920,15 @@ static int sa1100_irda_probe(struct platform_device *pdev)
struct net_device *dev;
struct sa1100_irda *si;
unsigned int baudrate_mask;
int err;
int err, irq;
if (!pdev->dev.platform_data)
return -EINVAL;
irq = platform_get_irq(pdev, 0);
if (irq <= 0)
return irq < 0 ? irq : -ENXIO;
err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
if (err)
goto err_mem_1;
......@@ -907,22 +943,27 @@ static int sa1100_irda_probe(struct platform_device *pdev)
if (!dev)
goto err_mem_4;
SET_NETDEV_DEV(dev, &pdev->dev);
si = netdev_priv(dev);
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
sg_init_table(&si->dma_rx.sg, 1);
sg_init_table(&si->dma_tx.sg, 1);
/*
* Initialise the HP-SIR buffers
*/
err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
if (err)
goto err_mem_5;
err = sa1100_irda_init_iobuf(&si->tx_buff, 4000);
err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME);
if (err)
goto err_mem_5;
dev->netdev_ops = &sa1100_irda_netdev_ops;
dev->irq = IRQ_Ser2ICP;
dev->irq = irq;
irda_init_max_qos_capabilies(&si->qos);
......@@ -996,6 +1037,74 @@ static int sa1100_irda_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
/*
* Suspend the IrDA interface.
*/
static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct sa1100_irda *si;
if (!dev)
return 0;
si = netdev_priv(dev);
if (si->open) {
/*
* Stop the transmit queue
*/
netif_device_detach(dev);
disable_irq(dev->irq);
sa1100_irda_shutdown(si);
__sa1100_irda_set_power(si, 0);
}
return 0;
}
/*
* Resume the IrDA interface.
*/
static int sa1100_irda_resume(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct sa1100_irda *si;
if (!dev)
return 0;
si = netdev_priv(dev);
if (si->open) {
/*
* If we missed a speed change, initialise at the new speed
* directly. It is debatable whether this is actually
* required, but in the interests of continuing from where
* we left off it is desirable. The converse argument is
* that we should re-negotiate at 9600 baud again.
*/
if (si->newspeed) {
si->speed = si->newspeed;
si->newspeed = 0;
}
sa1100_irda_startup(si);
__sa1100_irda_set_power(si, si->power);
enable_irq(dev->irq);
/*
* This automatically wakes up the queue
*/
netif_device_attach(dev);
}
return 0;
}
#else
#define sa1100_irda_suspend NULL
#define sa1100_irda_resume NULL
#endif
static struct platform_driver sa1100ir_driver = {
.probe = sa1100_irda_probe,
.remove = sa1100_irda_remove,
......
include/linux/sa11x0-dma.h 0 → 100644
View file @ 277dc7ae
/*
* SA11x0 DMA Engine support
*
* Copyright (C) 2012 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_SA11X0_DMA_H
#define __LINUX_SA11X0_DMA_H
struct dma_chan;
#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE)
bool sa11x0_dma_filter_fn(struct dma_chan *, void *);
#else
static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d)
{
return false;
}
#endif
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7