Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID updates from Jiri Kosina:

 - a lot of Wacom driver updates; most notably second generation Intuos
   Pro is now supported, code from Aaron Armstrong Skomra and Jason
   Gerecke

 - Surface 3 and 4 Type Cover Pro support from Daniel Keller, Dennis
   Chen and Yuta Kobayashi

 - hid-rmi is now generic transport driver, used by synaptics-rmi4;
   Support the Lenovo Thinkpad X1 Tablet dock follows on top, from
   Andrew Duggan

 - a few misc bugfixes and improvements here and there

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
  HID: intel-ish-hid: constify device_type structure
  HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range
  HID: intel-ish-hid: ipc: check FW status to distinguish ISH resume paths
  HID: multitouch: fix LG Melfas touchscreen
  HID: wacom: don't apply generic settings to old devices
  HID: wacom: generic: support LEDs
  HID: wacom: generic: support generic touch switch
  HID: wacom: generic: add vendor defined touch
  HID: wacom: generic: add support for touchring
  HID: wacom: generic: remove input_event_flag
  HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface
  HID: wacom: Move WAC_CMD_* into wacom_wac.h
  HID: wacom: Enable HID_GENERIC codepath for Bluetooth devices
  HID: wacom: do not attempt to switch mode while in probe
  HID: wacom: remove warning while disconnecting devices
  HID: wacom: release the resources before leaving despite devm
  HID: whitespace cleanup
  HID: multitouch: enable Surface 3 Type Cover Pro to report multitouch data
  HID: rmi: Support the Lenovo Thinkpad X1 Tablet dock using hid-rmi
  HID: rmi: Handle all Synaptics touchpads using hid-rmi
  ...

drivers/hid/Kconfig

@@ -785,6 +785,11 @@ config HID_SUNPLUS
 config HID_RMI
 	tristate "Synaptics RMI4 device support"
 	depends on HID
+	select RMI4_CORE
+	select RMI4_F03
+	select RMI4_F11
+	select RMI4_F12
+	select RMI4_F30
 	---help---
 	Support for Synaptics RMI4 touchpads.
 	Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid

drivers/hid/hid-core.c

@@ -43,7 +43,6 @@
  */
 
 #define DRIVER_DESC "HID core driver"
-#define DRIVER_LICENSE "GPL"
 
 int hid_debug = 0;
 module_param_named(debug, hid_debug, int, 0600);
@@ -724,13 +723,7 @@ static void hid_scan_collection(struct hid_parser *parser, unsigned type)
 		hid->group = HID_GROUP_SENSOR_HUB;
 
 	if (hid->vendor == USB_VENDOR_ID_MICROSOFT &&
-	    (hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3 ||
-	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2 ||
-	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP ||
-	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 ||
-	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 ||
-	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP ||
-	     hid->product == USB_DEVICE_ID_MS_POWER_COVER) &&
+	    hid->product == USB_DEVICE_ID_MS_POWER_COVER &&
 	    hid->group == HID_GROUP_MULTITOUCH)
 		hid->group = HID_GROUP_GENERIC;
 
@@ -826,7 +819,8 @@ static int hid_scan_report(struct hid_device *hid)
 		hid->group = HID_GROUP_WACOM;
 		break;
 	case USB_VENDOR_ID_SYNAPTICS:
-		if (hid->group == HID_GROUP_GENERIC)
+		if (hid->group == HID_GROUP_GENERIC ||
+		    hid->group == HID_GROUP_MULTITOUCH_WIN_8)
 			if ((parser->scan_flags & HID_SCAN_FLAG_VENDOR_SPECIFIC)
 			    && (parser->scan_flags & HID_SCAN_FLAG_GD_POINTER))
 				/*
@@ -1887,6 +1881,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
 #if IS_ENABLED(CONFIG_HID_MAYFLASH)
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2) },
 #endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_WN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_FA) },
@@ -1933,6 +1930,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CBTKBD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPPRODOCK) },
 #endif
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LG, USB_DEVICE_ID_LG_MELFAS_MT) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) },
@@ -1985,12 +1983,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_7K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_600) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3KV1) },
@@ -2126,6 +2118,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM6533) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) },
 	{ }
 };
 
@@ -2867,5 +2860,5 @@ module_exit(hid_exit);
 MODULE_AUTHOR("Andreas Gal");
 MODULE_AUTHOR("Vojtech Pavlik");
 MODULE_AUTHOR("Jiri Kosina");
-MODULE_LICENSE(DRIVER_LICENSE);
+MODULE_LICENSE("GPL");
 

drivers/hid/hid-ids.h

@@ -323,7 +323,8 @@
 #define USB_DEVICE_ID_DRAGONRISE_WIIU		0x1800
 #define USB_DEVICE_ID_DRAGONRISE_PS3		0x1801
 #define USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR	0x1803
-#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE	0x1843
+#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE1	0x1843
+#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE2	0x1844
 
 #define USB_VENDOR_ID_DWAV		0x0eef
 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
@@ -630,9 +631,11 @@
 #define USB_DEVICE_ID_LENOVO_CUSBKBD	0x6047
 #define USB_DEVICE_ID_LENOVO_CBTKBD	0x6048
 #define USB_DEVICE_ID_LENOVO_TPPRODOCK	0x6067
+#define USB_DEVICE_ID_LENOVO_X1_COVER	0x6085
 
 #define USB_VENDOR_ID_LG		0x1fd2
 #define USB_DEVICE_ID_LG_MULTITOUCH	0x0064
+#define USB_DEVICE_ID_LG_MELFAS_MT	0x6007
 
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e
@@ -725,12 +728,6 @@
 #define USB_DEVICE_ID_MS_SURFACE_PRO_2   0x0799
 #define USB_DEVICE_ID_MS_TOUCH_COVER_2   0x07a7
 #define USB_DEVICE_ID_MS_TYPE_COVER_2    0x07a9
-#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3    0x07dc
-#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2  0x07e2
-#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP 0x07dd
-#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 0x07e4
-#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 0x07e8
-#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP 0x07e9
 #define USB_DEVICE_ID_MS_POWER_COVER     0x07da
 
 #define USB_VENDOR_ID_MOJO		0x8282

drivers/hid/hid-mf.c

@@ -6,12 +6,14 @@
  *
  * Tested with:
  * 0079:1801 "DragonRise Inc. Mayflash PS3 Game Controller Adapter"
+ * 0079:1803 "DragonRise Inc. Mayflash Wireless Sensor DolphinBar"
+ * 0079:1843 "DragonRise Inc. Mayflash GameCube Game Controller Adapter"
+ * 0079:1844 "DragonRise Inc. Mayflash GameCube Game Controller Adapter (v04)"
  *
  * The following adapters probably work too, but need to be tested:
  * 0079:1800 "DragonRise Inc. Mayflash WIIU Game Controller Adapter"
- * 0079:1843 "DragonRise Inc. Mayflash GameCube Game Controller Adapter"
  *
- * Copyright (c) 2016 Marcel Hasler <mahasler@gmail.com>
+ * Copyright (c) 2016-2017 Marcel Hasler <mahasler@gmail.com>
  */
 
 /*
@@ -125,8 +127,8 @@ static int mf_probe(struct hid_device *hid, const struct hid_device_id *id)
 
 	dev_dbg(&hid->dev, "Mayflash HID hardware probe...\n");
 
-	/* Split device into four inputs */
-	hid->quirks |= HID_QUIRK_MULTI_INPUT;
+	/* Apply quirks as needed */
+	hid->quirks |= id->driver_data;
 
 	error = hid_parse(hid);
 	if (error) {
@@ -151,7 +153,14 @@ static int mf_probe(struct hid_device *hid, const struct hid_device_id *id)
 }
 
 static const struct hid_device_id mf_devices[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3),  },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3),
+		.driver_data = HID_QUIRK_MULTI_INPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR),
+		.driver_data = HID_QUIRK_MULTI_INPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1),
+		.driver_data = HID_QUIRK_MULTI_INPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2),
+		.driver_data = 0 }, /* No quirk required */
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, mf_devices);

drivers/hid/hid-microsoft.c

@@ -274,18 +274,6 @@ static const struct hid_device_id ms_devices[] = {
 		.driver_data = MS_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),
 		.driver_data = MS_DUPLICATE_USAGES },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3),
-		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2),
-		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP),
-		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4),
-		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2),
-		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
-		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER),
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_KEYBOARD),

drivers/hid/hid-multitouch.c

@@ -68,6 +68,7 @@ MODULE_LICENSE("GPL");
 #define MT_QUIRK_HOVERING		(1 << 11)
 #define MT_QUIRK_CONTACT_CNT_ACCURATE	(1 << 12)
 #define MT_QUIRK_FORCE_GET_FEATURE	(1 << 13)
+#define MT_QUIRK_FIX_CONST_CONTACT_ID	(1 << 14)
 
 #define MT_INPUTMODE_TOUCHSCREEN	0x02
 #define MT_INPUTMODE_TOUCHPAD		0x03
@@ -157,6 +158,7 @@ static void mt_post_parse(struct mt_device *td);
 #define MT_CLS_FLATFROG				0x0107
 #define MT_CLS_GENERALTOUCH_TWOFINGERS		0x0108
 #define MT_CLS_GENERALTOUCH_PWT_TENFINGERS	0x0109
+#define MT_CLS_LG				0x010a
 #define MT_CLS_VTL				0x0110
 
 #define MT_DEFAULT_MAXCONTACT	10
@@ -263,6 +265,12 @@ static struct mt_class mt_classes[] = {
 		.sn_move = 2048,
 		.maxcontacts = 40,
 	},
+	{ .name = MT_CLS_LG,
+		.quirks = MT_QUIRK_ALWAYS_VALID |
+			MT_QUIRK_FIX_CONST_CONTACT_ID |
+			MT_QUIRK_IGNORE_DUPLICATES |
+			MT_QUIRK_HOVERING |
+			MT_QUIRK_CONTACT_CNT_ACCURATE },
 	{ .name = MT_CLS_VTL,
 		.quirks = MT_QUIRK_ALWAYS_VALID |
 			MT_QUIRK_CONTACT_CNT_ACCURATE |
@@ -1078,6 +1086,34 @@ static int mt_input_configured(struct hid_device *hdev, struct hid_input *hi)
 	return 0;
 }
 
+static void mt_fix_const_field(struct hid_field *field, unsigned int usage)
+{
+	if (field->usage[0].hid != usage ||
+	    !(field->flags & HID_MAIN_ITEM_CONSTANT))
+		return;
+
+	field->flags &= ~HID_MAIN_ITEM_CONSTANT;
+	field->flags |= HID_MAIN_ITEM_VARIABLE;
+}
+
+static void mt_fix_const_fields(struct hid_device *hdev, unsigned int usage)
+{
+	struct hid_report *report;
+	int i;
+
+	list_for_each_entry(report,
+			    &hdev->report_enum[HID_INPUT_REPORT].report_list,
+			    list) {
+
+		if (!report->maxfield)
+			continue;
+
+		for (i = 0; i < report->maxfield; i++)
+			if (report->field[i]->maxusage >= 1)
+				mt_fix_const_field(report->field[i], usage);
+	}
+}
+
 static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	int ret, i;
@@ -1151,6 +1187,9 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (ret != 0)
 		return ret;
 
+	if (mtclass->quirks & MT_QUIRK_FIX_CONST_CONTACT_ID)
+		mt_fix_const_fields(hdev, HID_DG_CONTACTID);
+
 	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 	if (ret)
 		return ret;
@@ -1398,6 +1437,11 @@ static const struct hid_device_id mt_devices[] = {
 		MT_USB_DEVICE(USB_VENDOR_ID_ILITEK,
 			USB_DEVICE_ID_ILITEK_MULTITOUCH) },
 
+	/* LG Melfas panel */
+	{ .driver_data = MT_CLS_LG,
+		HID_USB_DEVICE(USB_VENDOR_ID_LG,
+			USB_DEVICE_ID_LG_MELFAS_MT) },
+
 	/* MosArt panels */
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
 		MT_USB_DEVICE(USB_VENDOR_ID_ASUS,

drivers/hid/hid-rmi.c

@@ -14,11 +14,14 @@
 #include <linux/hid.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/wait.h>
 #include <linux/sched.h>
+#include <linux/rmi.h>
 #include "hid-ids.h"
 
 #define RMI_MOUSE_REPORT_ID		0x01 /* Mouse emulation Report */
@@ -33,9 +36,6 @@
 #define RMI_READ_DATA_PENDING		1
 #define RMI_STARTED			2
 
-#define RMI_SLEEP_NORMAL		0x0
-#define RMI_SLEEP_DEEP_SLEEP		0x1
-
 /* device flags */
 #define RMI_DEVICE			BIT(0)
 #define RMI_DEVICE_HAS_PHYS_BUTTONS	BIT(1)
@@ -54,25 +54,12 @@ enum rmi_mode_type {
 	RMI_MODE_NO_PACKED_ATTN_REPORTS	= 2,
 };
 
-struct rmi_function {
-	unsigned page;			/* page of the function */
-	u16 query_base_addr;		/* base address for queries */
-	u16 command_base_addr;		/* base address for commands */
-	u16 control_base_addr;		/* base address for controls */
-	u16 data_base_addr;		/* base address for datas */
-	unsigned int interrupt_base;	/* cross-function interrupt number
-					 * (uniq in the device)*/
-	unsigned int interrupt_count;	/* number of interrupts */
-	unsigned int report_size;	/* size of a report */
-	unsigned long irq_mask;		/* mask of the interrupts
-					 * (to be applied against ATTN IRQ) */
-};
-
 /**
  * struct rmi_data - stores information for hid communication
  *
  * @page_mutex: Locks current page to avoid changing pages in unexpected ways.
  * @page: Keeps track of the current virtual page
+ * @xport: transport device to be registered with the RMI4 core.
  *
  * @wait: Used for waiting for read data
  *
@@ -84,26 +71,18 @@ struct rmi_function {
  *
  * @flags: flags for the current device (started, reading, etc...)
  *
- * @f11: placeholder of internal RMI function F11 description
- * @f30: placeholder of internal RMI function F30 description
- *
- * @max_fingers: maximum finger count reported by the device
- * @max_x: maximum x value reported by the device
- * @max_y: maximum y value reported by the device
- *
- * @gpio_led_count: count of GPIOs + LEDs reported by F30
- * @button_count: actual physical buttons count
- * @button_mask: button mask used to decode GPIO ATTN reports
- * @button_state_mask: pull state of the buttons
- *
- * @input: pointer to the kernel input device
- *
  * @reset_work: worker which will be called in case of a mouse report
  * @hdev: pointer to the struct hid_device
+ *
+ * @device_flags: flags which describe the device
+ *
+ * @domain: the IRQ domain allocated for this RMI4 device
+ * @rmi_irq: the irq that will be used to generate events to rmi-core
  */
 struct rmi_data {
 	struct mutex page_mutex;
 	int page;
+	struct rmi_transport_dev xport;
 
 	wait_queue_head_t wait;
 
@@ -115,34 +94,13 @@ struct rmi_data {
 
 	unsigned long flags;
 
-	struct rmi_function f01;
-	struct rmi_function f11;
-	struct rmi_function f30;
-
-	unsigned int max_fingers;
-	unsigned int max_x;
-	unsigned int max_y;
-	unsigned int x_size_mm;
-	unsigned int y_size_mm;
-	bool read_f11_ctrl_regs;
-	u8 f11_ctrl_regs[RMI_F11_CTRL_REG_COUNT];
-
-	unsigned int gpio_led_count;
-	unsigned int button_count;
-	unsigned long button_mask;
-	unsigned long button_state_mask;
-
-	struct input_dev *input;
-
 	struct work_struct reset_work;
 	struct hid_device *hdev;
 
 	unsigned long device_flags;
-	unsigned long firmware_id;
 
-	u8 f01_ctrl0;
-	u8 interrupt_enable_mask;
-	bool restore_interrupt_mask;
+	struct irq_domain *domain;
+	int rmi_irq;
 };
 
 #define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
@@ -220,10 +178,11 @@ static int rmi_write_report(struct hid_device *hdev, u8 *report, int len)
 	return ret;
 }
 
-static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf,
-		const int len)
+static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
+		void *buf, size_t len)
 {
-	struct rmi_data *data = hid_get_drvdata(hdev);
+	struct rmi_data *data = container_of(xport, struct rmi_data, xport);
+	struct hid_device *hdev = data->hdev;
 	int ret;
 	int bytes_read;
 	int bytes_needed;
@@ -292,15 +251,11 @@ static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf,
 	return ret;
 }
 
-static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf)
-{
-	return rmi_read_block(hdev, addr, buf, 1);
-}
-
-static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf,
-		const int len)
+static int rmi_hid_write_block(struct rmi_transport_dev *xport, u16 addr,
+		const void *buf, size_t len)
 {
-	struct rmi_data *data = hid_get_drvdata(hdev);
+	struct rmi_data *data = container_of(xport, struct rmi_data, xport);
+	struct hid_device *hdev = data->hdev;
 	int ret;
 
 	mutex_lock(&data->page_mutex);
@@ -332,62 +287,20 @@ static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf,
 	return ret;
 }
 
-static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf)
-{
-	return rmi_write_block(hdev, addr, buf, 1);
-}
-
-static void rmi_f11_process_touch(struct rmi_data *hdata, int slot,
-		u8 finger_state, u8 *touch_data)
-{
-	int x, y, wx, wy;
-	int wide, major, minor;
-	int z;
-
-	input_mt_slot(hdata->input, slot);
-	input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER,
-			finger_state == 0x01);
-	if (finger_state == 0x01) {
-		x = (touch_data[0] << 4) | (touch_data[2] & 0x0F);
-		y = (touch_data[1] << 4) | (touch_data[2] >> 4);
-		wx = touch_data[3] & 0x0F;
-		wy = touch_data[3] >> 4;
-		wide = (wx > wy);
-		major = max(wx, wy);
-		minor = min(wx, wy);
-		z = touch_data[4];
-
-		/* y is inverted */
-		y = hdata->max_y - y;
-
-		input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x);
-		input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y);
-		input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide);
-		input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z);
-		input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
-		input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
-	}
-}
-
 static int rmi_reset_attn_mode(struct hid_device *hdev)
 {
 	struct rmi_data *data = hid_get_drvdata(hdev);
+	struct rmi_device *rmi_dev = data->xport.rmi_dev;
 	int ret;
 
 	ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
 	if (ret)
 		return ret;
 
-	if (data->restore_interrupt_mask) {
-		ret = rmi_write(hdev, data->f01.control_base_addr + 1,
-				&data->interrupt_enable_mask);
-		if (ret) {
-			hid_err(hdev, "can not write F01 control register\n");
-			return ret;
-		}
-	}
+	if (test_bit(RMI_STARTED, &data->flags))
+		ret = rmi_dev->driver->reset_handler(rmi_dev);
 
-	return 0;
+	return ret;
 }
 
 static void rmi_reset_work(struct work_struct *work)
@@ -399,102 +312,22 @@ static void rmi_reset_work(struct work_struct *work)
 	rmi_reset_attn_mode(hdata->hdev);
 }
 
-static inline int rmi_schedule_reset(struct hid_device *hdev)
-{
-	struct rmi_data *hdata = hid_get_drvdata(hdev);
-	return schedule_work(&hdata->reset_work);
-}
-
-static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
-		int size)
-{
-	struct rmi_data *hdata = hid_get_drvdata(hdev);
-	int offset;
-	int i;
-
-	if (!(irq & hdata->f11.irq_mask) || size <= 0)
-		return 0;
-
-	offset = (hdata->max_fingers >> 2) + 1;
-	for (i = 0; i < hdata->max_fingers; i++) {
-		int fs_byte_position = i >> 2;
-		int fs_bit_position = (i & 0x3) << 1;
-		int finger_state = (data[fs_byte_position] >> fs_bit_position) &
-					0x03;
-		int position = offset + 5 * i;
-
-		if (position + 5 > size) {
-			/* partial report, go on with what we received */
-			printk_once(KERN_WARNING
-				"%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n",
-				 dev_driver_string(&hdev->dev),
-				 dev_name(&hdev->dev));
-			hid_dbg(hdev, "Incomplete finger report\n");
-			break;
-		}
-
-		rmi_f11_process_touch(hdata, i, finger_state, &data[position]);
-	}
-	input_mt_sync_frame(hdata->input);
-	input_sync(hdata->input);
-	return hdata->f11.report_size;
-}
-
-static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data,
-		int size)
+static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
 {
 	struct rmi_data *hdata = hid_get_drvdata(hdev);
-	int i;
-	int button = 0;
-	bool value;
-
-	if (!(irq & hdata->f30.irq_mask))
-		return 0;
+	struct rmi_device *rmi_dev = hdata->xport.rmi_dev;
+	unsigned long flags;
 
-	if (size < (int)hdata->f30.report_size) {
-		hid_warn(hdev, "Click Button pressed, but the click data is missing\n");
+	if (!(test_bit(RMI_STARTED, &hdata->flags)))
 		return 0;
-	}
 
-	for (i = 0; i < hdata->gpio_led_count; i++) {
-		if (test_bit(i, &hdata->button_mask)) {
-			value = (data[i / 8] >> (i & 0x07)) & BIT(0);
-			if (test_bit(i, &hdata->button_state_mask))
-				value = !value;
-			input_event(hdata->input, EV_KEY, BTN_LEFT + button++,
-					value);
-		}
-	}
-	return hdata->f30.report_size;
-}
+	local_irq_save(flags);
 
-static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
-{
-	struct rmi_data *hdata = hid_get_drvdata(hdev);
-	unsigned long irq_mask = 0;
-	unsigned index = 2;
+	rmi_set_attn_data(rmi_dev, data[1], &data[2], size - 2);
 
-	if (!(test_bit(RMI_STARTED, &hdata->flags)))
-		return 0;
+	generic_handle_irq(hdata->rmi_irq);
 
-	irq_mask |= hdata->f11.irq_mask;
-	irq_mask |= hdata->f30.irq_mask;
-
-	if (data[1] & ~irq_mask)
-		hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n",
-			data[1] & ~irq_mask, __FILE__, __LINE__);
-
-	if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) {
-		index += rmi_f11_input_event(hdev, data[1], &data[index],
-				size - index);
-		index += rmi_f30_input_event(hdev, data[1], &data[index],
-				size - index);
-	} else {
-		index += rmi_f30_input_event(hdev, data[1], &data[index],
-				size - index);
-		index += rmi_f11_input_event(hdev, data[1], &data[index],
-				size - index);
-	}
+	local_irq_restore(flags);
 
 	return 1;
 }
@@ -568,7 +401,7 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field,
 				return 1;
 		}
 
-		rmi_schedule_reset(hdev);
+		schedule_work(&data->reset_work);
 		return 1;
 	}
 
@@ -576,637 +409,71 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field,
 }
 
 #ifdef CONFIG_PM
-static int rmi_set_sleep_mode(struct hid_device *hdev, int sleep_mode)
-{
-	struct rmi_data *data = hid_get_drvdata(hdev);
-	int ret;
-	u8 f01_ctrl0;
-
-	f01_ctrl0 = (data->f01_ctrl0 & ~0x3) | sleep_mode;
-
-	ret = rmi_write(hdev, data->f01.control_base_addr,
-			&f01_ctrl0);
-	if (ret) {
-		hid_err(hdev, "can not write sleep mode\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static int rmi_suspend(struct hid_device *hdev, pm_message_t message)
 {
 	struct rmi_data *data = hid_get_drvdata(hdev);
-	int ret;
-	u8 buf[RMI_F11_CTRL_REG_COUNT];
-
-	if (!(data->device_flags & RMI_DEVICE))
-		return 0;
-
-	ret = rmi_read_block(hdev, data->f11.control_base_addr, buf,
-				RMI_F11_CTRL_REG_COUNT);
-	if (ret)
-		hid_warn(hdev, "can not read F11 control registers\n");
-	else
-		memcpy(data->f11_ctrl_regs, buf, RMI_F11_CTRL_REG_COUNT);
-
-
-	if (!device_may_wakeup(hdev->dev.parent))
-		return rmi_set_sleep_mode(hdev, RMI_SLEEP_DEEP_SLEEP);
-
-	return 0;
-}
-
-static int rmi_post_reset(struct hid_device *hdev)
-{
-	struct rmi_data *data = hid_get_drvdata(hdev);
+	struct rmi_device *rmi_dev = data->xport.rmi_dev;
 	int ret;
 
 	if (!(data->device_flags & RMI_DEVICE))
 		return 0;
 
-	ret = rmi_reset_attn_mode(hdev);
+	ret = rmi_driver_suspend(rmi_dev, false);
 	if (ret) {
-		hid_err(hdev, "can not set rmi mode\n");
+		hid_warn(hdev, "Failed to suspend device: %d\n", ret);
 		return ret;
 	}
 
-	if (data->read_f11_ctrl_regs) {
-		ret = rmi_write_block(hdev, data->f11.control_base_addr,
-				data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT);
-		if (ret)
-			hid_warn(hdev,
-				"can not write F11 control registers after reset\n");
-	}
-
-	if (!device_may_wakeup(hdev->dev.parent)) {
-		ret = rmi_set_sleep_mode(hdev, RMI_SLEEP_NORMAL);
-		if (ret) {
-			hid_err(hdev, "can not write sleep mode\n");
-			return ret;
-		}
-	}
-
-	return ret;
-}
-
-static int rmi_post_resume(struct hid_device *hdev)
-{
-	struct rmi_data *data = hid_get_drvdata(hdev);
-
-	if (!(data->device_flags & RMI_DEVICE))
 	return 0;
-
-	return rmi_reset_attn_mode(hdev);
-}
-#endif /* CONFIG_PM */
-
-#define RMI4_MAX_PAGE 0xff
-#define RMI4_PAGE_SIZE 0x0100
-
-#define PDT_START_SCAN_LOCATION 0x00e9
-#define PDT_END_SCAN_LOCATION	0x0005
-#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
-
-struct pdt_entry {
-	u8 query_base_addr:8;
-	u8 command_base_addr:8;
-	u8 control_base_addr:8;
-	u8 data_base_addr:8;
-	u8 interrupt_source_count:3;
-	u8 bits3and4:2;
-	u8 function_version:2;
-	u8 bit7:1;
-	u8 function_number:8;
-} __attribute__((__packed__));
-
-static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count)
-{
-	return GENMASK(irq_count + irq_base - 1, irq_base);
-}
-
-static void rmi_register_function(struct rmi_data *data,
-	struct pdt_entry *pdt_entry, int page, unsigned interrupt_count)
-{
-	struct rmi_function *f = NULL;
-	u16 page_base = page << 8;
-
-	switch (pdt_entry->function_number) {
-	case 0x01:
-		f = &data->f01;
-		break;
-	case 0x11:
-		f = &data->f11;
-		break;
-	case 0x30:
-		f = &data->f30;
-		break;
-	}
-
-	if (f) {
-		f->page = page;
-		f->query_base_addr = page_base | pdt_entry->query_base_addr;
-		f->command_base_addr = page_base | pdt_entry->command_base_addr;
-		f->control_base_addr = page_base | pdt_entry->control_base_addr;
-		f->data_base_addr = page_base | pdt_entry->data_base_addr;
-		f->interrupt_base = interrupt_count;
-		f->interrupt_count = pdt_entry->interrupt_source_count;
-		f->irq_mask = rmi_gen_mask(f->interrupt_base,
-						f->interrupt_count);
-		data->interrupt_enable_mask |= f->irq_mask;
-	}
-}
-
-static int rmi_scan_pdt(struct hid_device *hdev)
-{
-	struct rmi_data *data = hid_get_drvdata(hdev);
-	struct pdt_entry entry;
-	int page;
-	bool page_has_function;
-	int i;
-	int retval;
-	int interrupt = 0;
-	u16 page_start, pdt_start , pdt_end;
-
-	hid_info(hdev, "Scanning PDT...\n");
-
-	for (page = 0; (page <= RMI4_MAX_PAGE); page++) {
-		page_start = RMI4_PAGE_SIZE * page;
-		pdt_start = page_start + PDT_START_SCAN_LOCATION;
-		pdt_end = page_start + PDT_END_SCAN_LOCATION;
-
-		page_has_function = false;
-		for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) {
-			retval = rmi_read_block(hdev, i, &entry, sizeof(entry));
-			if (retval) {
-				hid_err(hdev,
-					"Read of PDT entry at %#06x failed.\n",
-					i);
-				goto error_exit;
-			}
-
-			if (RMI4_END_OF_PDT(entry.function_number))
-				break;
-
-			page_has_function = true;
-
-			hid_info(hdev, "Found F%02X on page %#04x\n",
-					entry.function_number, page);
-
-			rmi_register_function(data, &entry, page, interrupt);
-			interrupt += entry.interrupt_source_count;
-		}
-
-		if (!page_has_function)
-			break;
-	}
-
-	hid_info(hdev, "%s: Done with PDT scan.\n", __func__);
-	retval = 0;
-
-error_exit:
-	return retval;
 }
 
-#define RMI_DEVICE_F01_BASIC_QUERY_LEN	11
-
-static int rmi_populate_f01(struct hid_device *hdev)
-{
-	struct rmi_data *data = hid_get_drvdata(hdev);
-	u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN];
-	u8 info[3];
-	int ret;
-	bool has_query42;
-	bool has_lts;
-	bool has_sensor_id;
-	bool has_ds4_queries = false;
-	bool has_build_id_query = false;
-	bool has_package_id_query = false;
-	u16 query_offset = data->f01.query_base_addr;
-	u16 prod_info_addr;
-	u8 ds4_query_len;
-
-	ret = rmi_read_block(hdev, query_offset, basic_queries,
-				RMI_DEVICE_F01_BASIC_QUERY_LEN);
-	if (ret) {
-		hid_err(hdev, "Can not read basic queries from Function 0x1.\n");
-		return ret;
-	}
-
-	has_lts = !!(basic_queries[0] & BIT(2));
-	has_sensor_id = !!(basic_queries[1] & BIT(3));
-	has_query42 = !!(basic_queries[1] & BIT(7));
-
-	query_offset += 11;
-	prod_info_addr = query_offset + 6;
-	query_offset += 10;
-
-	if (has_lts)
-		query_offset += 20;
-
-	if (has_sensor_id)
-		query_offset++;
-
-	if (has_query42) {
-		ret = rmi_read(hdev, query_offset, info);
-		if (ret) {
-			hid_err(hdev, "Can not read query42.\n");
-			return ret;
-		}
-		has_ds4_queries = !!(info[0] & BIT(0));
-		query_offset++;
-	}
-
-	if (has_ds4_queries) {
-		ret = rmi_read(hdev, query_offset, &ds4_query_len);
-		if (ret) {
-			hid_err(hdev, "Can not read DS4 Query length.\n");
-			return ret;
-		}
-		query_offset++;
-
-		if (ds4_query_len > 0) {
-			ret = rmi_read(hdev, query_offset, info);
-			if (ret) {
-				hid_err(hdev, "Can not read DS4 query.\n");
-				return ret;
-			}
-
-			has_package_id_query = !!(info[0] & BIT(0));
-			has_build_id_query = !!(info[0] & BIT(1));
-		}
-	}
-
-	if (has_package_id_query)
-		prod_info_addr++;
-
-	if (has_build_id_query) {
-		ret = rmi_read_block(hdev, prod_info_addr, info, 3);
-		if (ret) {
-			hid_err(hdev, "Can not read product info.\n");
-			return ret;
-		}
-
-		data->firmware_id = info[1] << 8 | info[0];
-		data->firmware_id += info[2] * 65536;
-	}
-
-	ret = rmi_read_block(hdev, data->f01.control_base_addr, info,
-				2);
-
-	if (ret) {
-		hid_err(hdev, "can not read f01 ctrl registers\n");
-		return ret;
-	}
-
-	data->f01_ctrl0 = info[0];
-
-	if (!info[1]) {
-		/*
-		 * Do to a firmware bug in some touchpads the F01 interrupt
-		 * enable control register will be cleared on reset.
-		 * This will stop the touchpad from reporting data, so
-		 * if F01 CTRL1 is 0 then we need to explicitly enable
-		 * interrupts for the functions we want data for.
-		 */
-		data->restore_interrupt_mask = true;
-
-		ret = rmi_write(hdev, data->f01.control_base_addr + 1,
-				&data->interrupt_enable_mask);
-		if (ret) {
-			hid_err(hdev, "can not write to control reg 1: %d.\n",
-				ret);
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int rmi_populate_f11(struct hid_device *hdev)
+static int rmi_post_resume(struct hid_device *hdev)
 {
 	struct rmi_data *data = hid_get_drvdata(hdev);
-	u8 buf[20];
+	struct rmi_device *rmi_dev = data->xport.rmi_dev;
 	int ret;
-	bool has_query9;
-	bool has_query10 = false;
-	bool has_query11;
-	bool has_query12;
-	bool has_query27;
-	bool has_query28;
-	bool has_query36 = false;
-	bool has_physical_props;
-	bool has_gestures;
-	bool has_rel;
-	bool has_data40 = false;
-	bool has_dribble = false;
-	bool has_palm_detect = false;
-	unsigned x_size, y_size;
-	u16 query_offset;
-
-	if (!data->f11.query_base_addr) {
-		hid_err(hdev, "No 2D sensor found, giving up.\n");
-		return -ENODEV;
-	}
-
-	/* query 0 contains some useful information */
-	ret = rmi_read(hdev, data->f11.query_base_addr, buf);
-	if (ret) {
-		hid_err(hdev, "can not get query 0: %d.\n", ret);
-		return ret;
-	}
-	has_query9 = !!(buf[0] & BIT(3));
-	has_query11 = !!(buf[0] & BIT(4));
-	has_query12 = !!(buf[0] & BIT(5));
-	has_query27 = !!(buf[0] & BIT(6));
-	has_query28 = !!(buf[0] & BIT(7));
-
-	/* query 1 to get the max number of fingers */
-	ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf);
-	if (ret) {
-		hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret);
-		return ret;
-	}
-	data->max_fingers = (buf[0] & 0x07) + 1;
-	if (data->max_fingers > 5)
-		data->max_fingers = 10;
-
-	data->f11.report_size = data->max_fingers * 5 +
-				DIV_ROUND_UP(data->max_fingers, 4);
-
-	if (!(buf[0] & BIT(4))) {
-		hid_err(hdev, "No absolute events, giving up.\n");
-		return -ENODEV;
-	}
-
-	has_rel = !!(buf[0] & BIT(3));
-	has_gestures = !!(buf[0] & BIT(5));
-
-	ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf);
-	if (ret) {
-		hid_err(hdev, "can not get absolute data sources: %d.\n", ret);
-		return ret;
-	}
-
-	has_dribble = !!(buf[0] & BIT(4));
-
-	/*
-	 * At least 4 queries are guaranteed to be present in F11
-	 * +1 for query 5 which is present since absolute events are
-	 * reported and +1 for query 12.
-	 */
-	query_offset = 6;
-
-	if (has_rel)
-		++query_offset; /* query 6 is present */
-
-	if (has_gestures) {
-		/* query 8 to find out if query 10 exists */
-		ret = rmi_read(hdev,
-			data->f11.query_base_addr + query_offset + 1, buf);
-		if (ret) {
-			hid_err(hdev, "can not read gesture information: %d.\n",
-				ret);
-			return ret;
-		}
-		has_palm_detect = !!(buf[0] & BIT(0));
-		has_query10 = !!(buf[0] & BIT(2));
-
-		query_offset += 2; /* query 7 and 8 are present */
-	}
-
-	if (has_query9)
-		++query_offset;
-
-	if (has_query10)
-		++query_offset;
-
-	if (has_query11)
-		++query_offset;
-
-	/* query 12 to know if the physical properties are reported */
-	if (has_query12) {
-		ret = rmi_read(hdev, data->f11.query_base_addr
-				+ query_offset, buf);
-		if (ret) {
-			hid_err(hdev, "can not get query 12: %d.\n", ret);
-			return ret;
-		}
-		has_physical_props = !!(buf[0] & BIT(5));
-
-		if (has_physical_props) {
-			query_offset += 1;
-			ret = rmi_read_block(hdev,
-					data->f11.query_base_addr
-						+ query_offset, buf, 4);
-			if (ret) {
-				hid_err(hdev, "can not read query 15-18: %d.\n",
-					ret);
-				return ret;
-			}
-
-			x_size = buf[0] | (buf[1] << 8);
-			y_size = buf[2] | (buf[3] << 8);
-
-			data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10);
-			data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10);
-
-			hid_info(hdev, "%s: size in mm: %d x %d\n",
-				 __func__, data->x_size_mm, data->y_size_mm);
-
-			/*
-			 * query 15 - 18 contain the size of the sensor
-			 * and query 19 - 26 contain bezel dimensions
-			 */
-			query_offset += 12;
-		}
-	}
-
-	if (has_query27)
-		++query_offset;
-
-	if (has_query28) {
-		ret = rmi_read(hdev, data->f11.query_base_addr
-				+ query_offset, buf);
-		if (ret) {
-			hid_err(hdev, "can not get query 28: %d.\n", ret);
-			return ret;
-		}
-
-		has_query36 = !!(buf[0] & BIT(6));
-	}
-
-	if (has_query36) {
-		query_offset += 2;
-		ret = rmi_read(hdev, data->f11.query_base_addr
-				+ query_offset, buf);
-		if (ret) {
-			hid_err(hdev, "can not get query 36: %d.\n", ret);
-			return ret;
-		}
-
-		has_data40 = !!(buf[0] & BIT(5));
-	}
-
-
-	if (has_data40)
-		data->f11.report_size += data->max_fingers * 2;
-
-	ret = rmi_read_block(hdev, data->f11.control_base_addr,
-			data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT);
-	if (ret) {
-		hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret);
-		return ret;
-	}
-
-	/* data->f11_ctrl_regs now contains valid register data */
-	data->read_f11_ctrl_regs = true;
-
-	data->max_x = data->f11_ctrl_regs[6] | (data->f11_ctrl_regs[7] << 8);
-	data->max_y = data->f11_ctrl_regs[8] | (data->f11_ctrl_regs[9] << 8);
-
-	if (has_dribble) {
-		data->f11_ctrl_regs[0] = data->f11_ctrl_regs[0] & ~BIT(6);
-		ret = rmi_write(hdev, data->f11.control_base_addr,
-				data->f11_ctrl_regs);
-		if (ret) {
-			hid_err(hdev, "can not write to control reg 0: %d.\n",
-				ret);
-			return ret;
-		}
-	}
-
-	if (has_palm_detect) {
-		data->f11_ctrl_regs[11] = data->f11_ctrl_regs[11] & ~BIT(0);
-		ret = rmi_write(hdev, data->f11.control_base_addr + 11,
-				&data->f11_ctrl_regs[11]);
-		if (ret) {
-			hid_err(hdev, "can not write to control reg 11: %d.\n",
-				ret);
-			return ret;
-		}
-	}
 
+	if (!(data->device_flags & RMI_DEVICE))
 		return 0;
-}
-
-static int rmi_populate_f30(struct hid_device *hdev)
-{
-	struct rmi_data *data = hid_get_drvdata(hdev);
-	u8 buf[20];
-	int ret;
-	bool has_gpio, has_led;
-	unsigned bytes_per_ctrl;
-	u8 ctrl2_addr;
-	int ctrl2_3_length;
-	int i;
-
-	/* function F30 is for physical buttons */
-	if (!data->f30.query_base_addr) {
-		hid_err(hdev, "No GPIO/LEDs found, giving up.\n");
-		return -ENODEV;
-	}
 
-	ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2);
-	if (ret) {
-		hid_err(hdev, "can not get F30 query registers: %d.\n", ret);
+	ret = rmi_reset_attn_mode(hdev);
+	if (ret)
 		return ret;
-	}
-
-	has_gpio = !!(buf[0] & BIT(3));
-	has_led = !!(buf[0] & BIT(2));
-	data->gpio_led_count = buf[1] & 0x1f;
-
-	/* retrieve ctrl 2 & 3 registers */
-	bytes_per_ctrl = (data->gpio_led_count + 7) / 8;
-	/* Ctrl0 is present only if both has_gpio and has_led are set*/
-	ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0;
-	/* Ctrl1 is always be present */
-	ctrl2_addr += bytes_per_ctrl;
-	ctrl2_3_length = 2 * bytes_per_ctrl;
 
-	data->f30.report_size = bytes_per_ctrl;
-
-	ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr,
-				buf, ctrl2_3_length);
+	ret = rmi_driver_resume(rmi_dev, false);
 	if (ret) {
-		hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n",
-			ctrl2_3_length, ret);
+		hid_warn(hdev, "Failed to resume device: %d\n", ret);
 		return ret;
 	}
 
-	for (i = 0; i < data->gpio_led_count; i++) {
-		int byte_position = i >> 3;
-		int bit_position = i & 0x07;
-		u8 dir_byte = buf[byte_position];
-		u8 data_byte = buf[byte_position + bytes_per_ctrl];
-		bool dir = (dir_byte >> bit_position) & BIT(0);
-		bool dat = (data_byte >> bit_position) & BIT(0);
-
-		if (dir == 0) {
-			/* input mode */
-			if (dat) {
-				/* actual buttons have pull up resistor */
-				data->button_count++;
-				set_bit(i, &data->button_mask);
-				set_bit(i, &data->button_state_mask);
-			}
-		}
-
-	}
-
 	return 0;
 }
+#endif /* CONFIG_PM */
 
-static int rmi_populate(struct hid_device *hdev)
+static int rmi_hid_reset(struct rmi_transport_dev *xport, u16 reset_addr)
 {
-	struct rmi_data *data = hid_get_drvdata(hdev);
-	int ret;
-
-	ret = rmi_scan_pdt(hdev);
-	if (ret) {
-		hid_err(hdev, "PDT scan failed with code %d.\n", ret);
-		return ret;
-	}
-
-	ret = rmi_populate_f01(hdev);
-	if (ret) {
-		hid_err(hdev, "Error while initializing F01 (%d).\n", ret);
-		return ret;
-	}
-
-	ret = rmi_populate_f11(hdev);
-	if (ret) {
-		hid_err(hdev, "Error while initializing F11 (%d).\n", ret);
-		return ret;
-	}
-
-	if (!(data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)) {
-		ret = rmi_populate_f30(hdev);
-		if (ret)
-			hid_warn(hdev, "Error while initializing F30 (%d).\n", ret);
-	}
+	struct rmi_data *data = container_of(xport, struct rmi_data, xport);
+	struct hid_device *hdev = data->hdev;
 
-	return 0;
+	return rmi_reset_attn_mode(hdev);
 }
 
 static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
 {
 	struct rmi_data *data = hid_get_drvdata(hdev);
 	struct input_dev *input = hi->input;
-	int ret;
-	int res_x, res_y, i;
+	int ret = 0;
+
+	if (!(data->device_flags & RMI_DEVICE))
+		return 0;
 
-	data->input = input;
+	data->xport.input = input;
 
 	hid_dbg(hdev, "Opening low level driver\n");
 	ret = hid_hw_open(hdev);
 	if (ret)
 		return ret;
 
-	if (!(data->device_flags & RMI_DEVICE))
-		return 0;
-
 	/* Allow incoming hid reports */
 	hid_device_io_start(hdev);
 
@@ -1222,40 +489,10 @@ static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
 		goto exit;
 	}
 
-	ret = rmi_populate(hdev);
-	if (ret)
-		goto exit;
-
-	hid_info(hdev, "firmware id: %ld\n", data->firmware_id);
-
-	__set_bit(EV_ABS, input->evbit);
-	input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0);
-	input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0);
-
-	if (data->x_size_mm && data->y_size_mm) {
-		res_x = (data->max_x - 1) / data->x_size_mm;
-		res_y = (data->max_y - 1) / data->y_size_mm;
-
-		input_abs_set_res(input, ABS_MT_POSITION_X, res_x);
-		input_abs_set_res(input, ABS_MT_POSITION_Y, res_y);
-	}
-
-	input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
-	input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0);
-	input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
-	input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
-
-	ret = input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
-	if (ret < 0)
+	ret = rmi_register_transport_device(&data->xport);
+	if (ret < 0) {
+		dev_err(&hdev->dev, "failed to register transport driver\n");
 		goto exit;
-
-	if (data->button_count) {
-		__set_bit(EV_KEY, input->evbit);
-		for (i = 0; i < data->button_count; i++)
-			__set_bit(BTN_LEFT + i, input->keybit);
-
-		if (data->button_count == 1)
-			__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 	}
 
 	set_bit(RMI_STARTED, &data->flags);
@@ -1304,6 +541,71 @@ static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type,
 	return 0;
 }
 
+static struct rmi_device_platform_data rmi_hid_pdata = {
+	.sensor_pdata = {
+		.sensor_type = rmi_sensor_touchpad,
+		.axis_align.flip_y = true,
+		.dribble = RMI_REG_STATE_ON,
+		.palm_detect = RMI_REG_STATE_OFF,
+	},
+};
+
+static const struct rmi_transport_ops hid_rmi_ops = {
+	.write_block	= rmi_hid_write_block,
+	.read_block	= rmi_hid_read_block,
+	.reset		= rmi_hid_reset,
+};
+
+static void rmi_irq_teardown(void *data)
+{
+	struct rmi_data *hdata = data;
+	struct irq_domain *domain = hdata->domain;
+
+	if (!domain)
+		return;
+
+	irq_dispose_mapping(irq_find_mapping(domain, 0));
+
+	irq_domain_remove(domain);
+	hdata->domain = NULL;
+	hdata->rmi_irq = 0;
+}
+
+static int rmi_irq_map(struct irq_domain *h, unsigned int virq,
+		       irq_hw_number_t hw_irq_num)
+{
+	irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops rmi_irq_ops = {
+	.map = rmi_irq_map,
+};
+
+static int rmi_setup_irq_domain(struct hid_device *hdev)
+{
+	struct rmi_data *hdata = hid_get_drvdata(hdev);
+	int ret;
+
+	hdata->domain = irq_domain_create_linear(hdev->dev.fwnode, 1,
+						 &rmi_irq_ops, hdata);
+	if (!hdata->domain)
+		return -ENOMEM;
+
+	ret = devm_add_action_or_reset(&hdev->dev, &rmi_irq_teardown, hdata);
+	if (ret)
+		return ret;
+
+	hdata->rmi_irq = irq_create_mapping(hdata->domain, 0);
+	if (hdata->rmi_irq <= 0) {
+		hid_err(hdev, "Can't allocate an IRQ\n");
+		return hdata->rmi_irq < 0 ? hdata->rmi_irq : -ENXIO;
+	}
+
+	return 0;
+}
+
 static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	struct rmi_data *data = NULL;
@@ -1365,8 +667,8 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
 	if (!data->writeReport) {
-		ret = -ENOMEM;
-		return ret;
+		hid_err(hdev, "failed to allocate buffer for HID reports\n");
+		return -ENOMEM;
 	}
 
 	data->readReport = data->writeReport + data->output_report_size;
@@ -1375,6 +677,21 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	mutex_init(&data->page_mutex);
 
+	ret = rmi_setup_irq_domain(hdev);
+	if (ret) {
+		hid_err(hdev, "failed to allocate IRQ domain\n");
+		return ret;
+	}
+
+	if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
+		rmi_hid_pdata.f30_data.disable = true;
+
+	data->xport.dev = hdev->dev.parent;
+	data->xport.pdata = rmi_hid_pdata;
+	data->xport.pdata.irq = data->rmi_irq;
+	data->xport.proto_name = "hid";
+	data->xport.ops = &hid_rmi_ops;
+
 start:
 	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 	if (ret) {
@@ -1382,17 +699,6 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		return ret;
 	}
 
-	if ((data->device_flags & RMI_DEVICE) &&
-	    !test_bit(RMI_STARTED, &data->flags))
-		/*
-		 * The device maybe in the bootloader if rmi_input_configured
-		 * failed to find F11 in the PDT. Print an error, but don't
-		 * return an error from rmi_probe so that hidraw will be
-		 * accessible from userspace. That way a userspace tool
-		 * can be used to reload working firmware on the touchpad.
-		 */
-		hid_err(hdev, "Device failed to be properly configured\n");
-
 	return 0;
 }
 
@@ -1401,6 +707,8 @@ static void rmi_remove(struct hid_device *hdev)
 	struct rmi_data *hdata = hid_get_drvdata(hdev);
 
 	clear_bit(RMI_STARTED, &hdata->flags);
+	cancel_work_sync(&hdata->reset_work);
+	rmi_unregister_transport_device(&hdata->xport);
 
 	hid_hw_stop(hdev);
 }
@@ -1408,6 +716,7 @@ static void rmi_remove(struct hid_device *hdev)
 static const struct hid_device_id rmi_id[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14),
 		.driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) },
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) },
 	{ }
 };
@@ -1425,7 +734,7 @@ static struct hid_driver rmi_driver = {
 #ifdef CONFIG_PM
 	.suspend		= rmi_suspend,
 	.resume			= rmi_post_resume,
-	.reset_resume		= rmi_post_reset,
+	.reset_resume		= rmi_post_resume,
 #endif
 };
 

drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h

@@ -110,6 +110,14 @@
 #define IPC_ILUP_OFFS			(0)
 #define IPC_ILUP_BIT			(1<<IPC_ILUP_OFFS)
 
+/*
+ * ISH FW status bits in ISH FW Status Register
+ */
+#define IPC_ISH_FWSTS_SHIFT		12
+#define IPC_ISH_FWSTS_MASK		GENMASK(15, 12)
+#define IPC_GET_ISH_FWSTS(status)	\
+	(((status) & IPC_ISH_FWSTS_MASK) >> IPC_ISH_FWSTS_SHIFT)
+
 /*
  * FW status bits (relevant)
  */

drivers/hid/intel-ish-hid/ipc/hw-ish.h

@@ -61,6 +61,18 @@ struct ish_hw {
 	void __iomem *mem_addr;
 };
 
+/*
+ * ISH FW status type
+ */
+enum {
+	FWSTS_AFTER_RESET		= 0,
+	FWSTS_WAIT_FOR_HOST		= 4,
+	FWSTS_START_KERNEL_DMA		= 5,
+	FWSTS_FW_IS_RUNNING		= 7,
+	FWSTS_SENSOR_APP_LOADED		= 8,
+	FWSTS_SENSOR_APP_RUNNING	= 15
+};
+
 #define to_ish_hw(dev) (struct ish_hw *)((dev)->hw)
 
 irqreturn_t ish_irq_handler(int irq, void *dev_id);

drivers/hid/intel-ish-hid/ipc/pci-ish.c

@@ -24,7 +24,6 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
-#include <linux/miscdevice.h>
 #define CREATE_TRACE_POINTS
 #include <trace/events/intel_ish.h>
 #include "ishtp-dev.h"
@@ -47,7 +46,8 @@ MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
  *
  * Callback to direct log messages to Linux trace buffers
  */
-static void ish_event_tracer(struct ishtp_device *dev, char *format, ...)
+static __printf(2, 3)
+void ish_event_tracer(struct ishtp_device *dev, const char *format, ...)
 {
 	if (trace_ishtp_dump_enabled()) {
 		va_list args;
@@ -205,12 +205,15 @@ static void ish_remove(struct pci_dev *pdev)
 #ifdef CONFIG_PM
 static struct device *ish_resume_device;
 
+/* 50ms to get resume response */
+#define WAIT_FOR_RESUME_ACK_MS		50
+
 /**
  * ish_resume_handler() - Work function to complete resume
  * @work:	work struct
  *
  * The resume work function to complete resume function asynchronously.
- * There are two types of platforms, one where ISH is not powered off,
+ * There are two resume paths, one where ISH is not powered off,
  * in that case a simple resume message is enough, others we need
  * a reset sequence.
  */
@@ -218,20 +221,31 @@ static void ish_resume_handler(struct work_struct *work)
 {
 	struct pci_dev *pdev = to_pci_dev(ish_resume_device);
 	struct ishtp_device *dev = pci_get_drvdata(pdev);
+	uint32_t fwsts;
 	int ret;
 
+	/* Get ISH FW status */
+	fwsts = IPC_GET_ISH_FWSTS(dev->ops->get_fw_status(dev));
+
+	/*
+	 * If currently, in ISH FW, sensor app is loaded or beyond that,
+	 * it means ISH isn't powered off, in this case, send a resume message.
+	 */
+	if (fwsts >= FWSTS_SENSOR_APP_LOADED) {
 		ishtp_send_resume(dev);
 
-	/* 50 ms to get resume response */
+		/* Waiting to get resume response */
 		if (dev->resume_flag)
 			ret = wait_event_interruptible_timeout(dev->resume_wait,
 				!dev->resume_flag,
-						       msecs_to_jiffies(50));
+				msecs_to_jiffies(WAIT_FOR_RESUME_ACK_MS));
+	}
 
 	/*
-	 * If no resume response. This platform  is not S0ix compatible
-	 * So on resume full reboot of ISH processor will happen, so
-	 * need to go through init sequence again
+	 * If in ISH FW, sensor app isn't loaded yet, or no resume response.
+	 * That means this platform is not S0ix compatible, or something is
+	 * wrong with ISH FW. So on resume, full reboot of ISH processor will
+	 * happen, so need to go through init sequence again.
 	 */
 	if (dev->resume_flag)
 		ish_init(dev);

drivers/hid/intel-ish-hid/ishtp-hid.c

@@ -208,7 +208,7 @@ int ishtp_hid_probe(unsigned int cur_hid_dev,
 	hid->version = le16_to_cpu(ISH_HID_VERSION);
 	hid->vendor = le16_to_cpu(ISH_HID_VENDOR);
 	hid->product = le16_to_cpu(ISH_HID_PRODUCT);
-	snprintf(hid->name, sizeof(hid->name), "%s %04hX:%04hX", "hid-ishtp",
+	snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X", "hid-ishtp",
 		hid->vendor, hid->product);
 
 	rv = hid_add_device(hid);

drivers/hid/intel-ish-hid/ishtp/bus.c

@@ -358,7 +358,7 @@ static void ishtp_cl_dev_release(struct device *dev)
 	kfree(to_ishtp_cl_device(dev));
 }
 
-static struct device_type ishtp_cl_device_type = {
+static const struct device_type ishtp_cl_device_type = {
 	.release	= ishtp_cl_dev_release,
 };
 

drivers/hid/intel-ish-hid/ishtp/hbm.c

@@ -19,7 +19,6 @@
 #include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/spinlock.h>
-#include <linux/miscdevice.h>
 #include "ishtp-dev.h"
 #include "hbm.h"
 #include "client.h"

drivers/hid/intel-ish-hid/ishtp/init.c

@@ -16,7 +16,6 @@
 #include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
-#include <linux/miscdevice.h>
 #include "ishtp-dev.h"
 #include "hbm.h"
 #include "client.h"

drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h

@@ -238,7 +238,8 @@ struct ishtp_device {
 	uint64_t ishtp_host_dma_rx_buf_phys;
 
 	/* Dump to trace buffers if enabled*/
-	void (*print_log)(struct ishtp_device *dev, char *format, ...);
+	__printf(2, 3) void (*print_log)(struct ishtp_device *dev,
+					 const char *format, ...);
 
 	/* Debug stats */
 	unsigned int	ipc_rx_cnt;

drivers/hid/usbhid/hid-core.c

@@ -43,7 +43,6 @@
  */
 
 #define DRIVER_DESC "USB HID core driver"
-#define DRIVER_LICENSE "GPL"
 
 /*
  * Module parameters.
@@ -1660,4 +1659,4 @@ MODULE_AUTHOR("Andreas Gal");
 MODULE_AUTHOR("Vojtech Pavlik");
 MODULE_AUTHOR("Jiri Kosina");
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
+MODULE_LICENSE("GPL");

drivers/hid/usbhid/hid-quirks.c

@@ -85,7 +85,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR, HID_QUIRK_MULTI_INPUT },
-	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_ELAN, HID_ANY_ID, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
@@ -103,12 +103,6 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },

drivers/hid/usbhid/usbkbd.c

@@ -39,11 +39,10 @@
 #define DRIVER_VERSION ""
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB HID Boot Protocol keyboard driver"
-#define DRIVER_LICENSE "GPL"
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
+MODULE_LICENSE("GPL");
 
 static const unsigned char usb_kbd_keycode[256] = {
 	  0,  0,  0,  0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,

drivers/hid/usbhid/usbmouse.c

@@ -42,11 +42,10 @@
 #define DRIVER_VERSION "v1.6"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB HID Boot Protocol mouse driver"
-#define DRIVER_LICENSE "GPL"
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
+MODULE_LICENSE("GPL");
 
 struct usb_mouse {
 	char name[128];

drivers/hid/wacom.h

@@ -102,7 +102,6 @@
 #define DRIVER_VERSION "v2.00"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom tablet driver"
-#define DRIVER_LICENSE "GPL"
 
 #define USB_VENDOR_ID_WACOM	0x056a
 #define USB_VENDOR_ID_LENOVO	0x17ef
@@ -166,7 +165,9 @@ struct wacom {
 	struct work_struct wireless_work;
 	struct work_struct battery_work;
 	struct work_struct remote_work;
+	struct delayed_work init_work;
 	struct wacom_remote *remote;
+	bool generic_has_leds;
 	struct wacom_leds {
 		struct wacom_group_leds *groups;
 		unsigned int count;
@@ -218,4 +219,6 @@ enum led_brightness wacom_leds_brightness_get(struct wacom_led *led);
 struct wacom_led *wacom_led_find(struct wacom *wacom, unsigned int group,
 				 unsigned int id);
 struct wacom_led *wacom_led_next(struct wacom *wacom, struct wacom_led *cur);
+int wacom_equivalent_usage(int usage);
+int wacom_initialize_leds(struct wacom *wacom);
 #endif

drivers/hid/wacom_sys.c

@@ -16,15 +16,7 @@
 #include <linux/input/mt.h>
 
 #define WAC_MSG_RETRIES		5
-
-#define WAC_CMD_WL_LED_CONTROL	0x03
-#define WAC_CMD_LED_CONTROL	0x20
-#define WAC_CMD_ICON_START	0x21
-#define WAC_CMD_ICON_XFER	0x23
-#define WAC_CMD_ICON_BT_XFER	0x26
 #define WAC_CMD_RETRIES		10
-#define WAC_CMD_DELETE_PAIRING	0x20
-#define WAC_CMD_UNPAIR_ALL	0xFF
 
 #define DEV_ATTR_RW_PERM (S_IRUGO | S_IWUSR | S_IWGRP)
 #define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP)
@@ -120,11 +112,12 @@ static void wacom_feature_mapping(struct hid_device *hdev,
 	struct wacom *wacom = hid_get_drvdata(hdev);
 	struct wacom_features *features = &wacom->wacom_wac.features;
 	struct hid_data *hid_data = &wacom->wacom_wac.hid_data;
+	unsigned int equivalent_usage = wacom_equivalent_usage(usage->hid);
 	u8 *data;
 	int ret;
 	int n;
 
-	switch (usage->hid) {
+	switch (equivalent_usage) {
 	case HID_DG_CONTACTMAX:
 		/* leave touch_max as is if predefined */
 		if (!features->touch_max) {
@@ -333,8 +326,14 @@ static void wacom_post_parse_hid(struct hid_device *hdev,
 	if (features->type == HID_GENERIC) {
 		/* Any last-minute generic device setup */
 		if (features->touch_max > 1) {
-			input_mt_init_slots(wacom_wac->touch_input, wacom_wac->features.touch_max,
+			if (features->device_type & WACOM_DEVICETYPE_DIRECT)
+				input_mt_init_slots(wacom_wac->touch_input,
+						    wacom_wac->features.touch_max,
 						    INPUT_MT_DIRECT);
+			else
+				input_mt_init_slots(wacom_wac->touch_input,
+						    wacom_wac->features.touch_max,
+						    INPUT_MT_POINTER);
 		}
 	}
 }
@@ -497,11 +496,11 @@ static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed,
  * from the tablet, it is necessary to switch the tablet out of this
  * mode and into one which sends the full range of tablet data.
  */
-static int wacom_query_tablet_data(struct hid_device *hdev,
-		struct wacom_features *features)
+static int _wacom_query_tablet_data(struct wacom *wacom)
 {
-	struct wacom *wacom = hid_get_drvdata(hdev);
+	struct hid_device *hdev = wacom->hdev;
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+	struct wacom_features *features = &wacom_wac->features;
 
 	if (hdev->bus == BUS_BLUETOOTH)
 		return wacom_bt_query_tablet_data(hdev, 1, features);
@@ -757,9 +756,6 @@ static int wacom_led_control(struct wacom *wacom)
 	unsigned char report_id = WAC_CMD_LED_CONTROL;
 	int buf_size = 9;
 
-	if (!hid_get_drvdata(wacom->hdev))
-		return -ENODEV;
-
 	if (!wacom->led.groups)
 		return -ENOTSUPP;
 
@@ -767,12 +763,21 @@ static int wacom_led_control(struct wacom *wacom)
 		report_id = WAC_CMD_WL_LED_CONTROL;
 		buf_size = 13;
 	}
+	else if (wacom->wacom_wac.features.type == INTUOSP2_BT) {
+		report_id = WAC_CMD_WL_INTUOSP2;
+		buf_size = 51;
+	}
 	buf = kzalloc(buf_size, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
-	if (wacom->wacom_wac.features.type >= INTUOS5S &&
-	    wacom->wacom_wac.features.type <= INTUOSPL) {
+	if (wacom->wacom_wac.features.type == HID_GENERIC) {
+		buf[0] = WAC_CMD_LED_CONTROL_GENERIC;
+		buf[1] = wacom->led.llv;
+		buf[2] = wacom->led.groups[0].select & 0x03;
+
+	} else if ((wacom->wacom_wac.features.type >= INTUOS5S &&
+	    wacom->wacom_wac.features.type <= INTUOSPL)) {
 		/*
 		 * Touch Ring and crop mark LED luminance may take on
 		 * one of four values:
@@ -792,6 +797,16 @@ static int wacom_led_control(struct wacom *wacom)
 		} else
 			buf[1] = led_bits;
 	}
+	else if (wacom->wacom_wac.features.type == INTUOSP2_BT) {
+		buf[0] = report_id;
+		buf[4] = 100; // Power Connection LED (ORANGE)
+		buf[5] = 100; // BT Connection LED (BLUE)
+		buf[6] = 100; // Paper Mode (RED?)
+		buf[7] = 100; // Paper Mode (GREEN?)
+		buf[8] = 100; // Paper Mode (BLUE?)
+		buf[9] = wacom->led.llv;
+		buf[10] = wacom->led.groups[0].select & 0x03;
+	}
 	else {
 		int led = wacom->led.groups[0].select | 0x4;
 
@@ -1032,6 +1047,17 @@ static struct attribute_group intuos5_led_attr_group = {
 	.attrs = intuos5_led_attrs,
 };
 
+static struct attribute *generic_led_attrs[] = {
+	&dev_attr_status0_luminance.attr,
+	&dev_attr_status_led0_select.attr,
+	NULL
+};
+
+static struct attribute_group generic_led_attr_group = {
+	.name = "wacom_led",
+	.attrs = generic_led_attrs,
+};
+
 struct wacom_sysfs_group_devres {
 	struct attribute_group *group;
 	struct kobject *root;
@@ -1353,7 +1379,7 @@ static int wacom_leds_alloc_and_register(struct wacom *wacom, int group_count,
 	return 0;
 }
 
-static int wacom_initialize_leds(struct wacom *wacom)
+int wacom_initialize_leds(struct wacom *wacom)
 {
 	int error;
 
@@ -1362,6 +1388,23 @@ static int wacom_initialize_leds(struct wacom *wacom)
 
 	/* Initialize default values */
 	switch (wacom->wacom_wac.features.type) {
+	case HID_GENERIC:
+		if (!wacom->generic_has_leds)
+			return 0;
+		wacom->led.llv = 100;
+		wacom->led.max_llv = 100;
+
+		error = wacom_leds_alloc_and_register(wacom, 1, 4, false);
+		if (error) {
+			hid_err(wacom->hdev,
+				"cannot create leds err: %d\n", error);
+			return error;
+		}
+
+		error = wacom_devm_sysfs_create_group(wacom,
+						      &generic_led_attr_group);
+		break;
+
 	case INTUOS4S:
 	case INTUOS4:
 	case INTUOS4WL:
@@ -1420,6 +1463,17 @@ static int wacom_initialize_leds(struct wacom *wacom)
 						      &intuos5_led_attr_group);
 		break;
 
+	case INTUOSP2_BT:
+		wacom->led.llv = 50;
+		wacom->led.max_llv = 100;
+		error = wacom_leds_alloc_and_register(wacom, 1, 4, false);
+		if (error) {
+			hid_err(wacom->hdev,
+				"cannot create leds err: %d\n", error);
+			return error;
+		}
+		return 0;
+
 	case REMOTE:
 		wacom->led.llv = 255;
 		wacom->led.max_llv = 255;
@@ -1440,11 +1494,23 @@ static int wacom_initialize_leds(struct wacom *wacom)
 			"cannot create sysfs group err: %d\n", error);
 		return error;
 	}
-	wacom_led_control(wacom);
 
 	return 0;
 }
 
+static void wacom_init_work(struct work_struct *work)
+{
+	struct wacom *wacom = container_of(work, struct wacom, init_work.work);
+
+	_wacom_query_tablet_data(wacom);
+	wacom_led_control(wacom);
+}
+
+static void wacom_query_tablet_data(struct wacom *wacom)
+{
+	schedule_delayed_work(&wacom->init_work, msecs_to_jiffies(1000));
+}
+
 static enum power_supply_property wacom_battery_props[] = {
 	POWER_SUPPLY_PROP_MODEL_NAME,
 	POWER_SUPPLY_PROP_PRESENT,
@@ -2020,6 +2086,24 @@ static void wacom_release_resources(struct wacom *wacom)
 	wacom->wacom_wac.pad_input = NULL;
 }
 
+static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
+{
+	if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) {
+		wacom_wac->shared->type = wacom_wac->features.type;
+		wacom_wac->shared->touch_input = wacom_wac->touch_input;
+	}
+
+	if (wacom_wac->has_mute_touch_switch)
+		wacom_wac->shared->has_mute_touch_switch = true;
+
+	if (wacom_wac->shared->has_mute_touch_switch &&
+	    wacom_wac->shared->touch_input) {
+		set_bit(EV_SW, wacom_wac->shared->touch_input->evbit);
+		input_set_capability(wacom_wac->shared->touch_input, EV_SW,
+				     SW_MUTE_DEVICE);
+	}
+}
+
 static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
 {
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
@@ -2118,7 +2202,7 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
 
 	if (!wireless) {
 		/* Note that if query fails it is not a hard failure */
-		wacom_query_tablet_data(hdev, features);
+		wacom_query_tablet_data(wacom);
 	}
 
 	/* touch only Bamboo doesn't support pen */
@@ -2139,13 +2223,7 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
 	if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR)
 		error = hid_hw_open(hdev);
 
-	if ((wacom_wac->features.type == INTUOSHT ||
-	     wacom_wac->features.type == INTUOSHT2) &&
-	    (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)) {
-		wacom_wac->shared->type = wacom_wac->features.type;
-		wacom_wac->shared->touch_input = wacom_wac->touch_input;
-	}
-
+	wacom_set_shared_values(wacom_wac);
 	devres_close_group(&hdev->dev, wacom);
 
 	return 0;
@@ -2450,6 +2528,7 @@ static int wacom_probe(struct hid_device *hdev,
 	wacom->usbdev = dev;
 	wacom->intf = intf;
 	mutex_init(&wacom->lock);
+	INIT_DELAYED_WORK(&wacom->init_work, wacom_init_work);
 	INIT_WORK(&wacom->wireless_work, wacom_wireless_work);
 	INIT_WORK(&wacom->battery_work, wacom_battery_work);
 	INIT_WORK(&wacom->remote_work, wacom_remote_work);
@@ -2491,12 +2570,17 @@ static void wacom_remove(struct hid_device *hdev)
 
 	hid_hw_stop(hdev);
 
+	cancel_delayed_work_sync(&wacom->init_work);
 	cancel_work_sync(&wacom->wireless_work);
 	cancel_work_sync(&wacom->battery_work);
 	cancel_work_sync(&wacom->remote_work);
 	if (hdev->bus == BUS_BLUETOOTH)
 		device_remove_file(&hdev->dev, &dev_attr_speed);
 
+	/* make sure we don't trigger the LEDs */
+	wacom_led_groups_release(wacom);
+	wacom_release_resources(wacom);
+
 	hid_set_drvdata(hdev, NULL);
 }
 
@@ -2504,12 +2588,11 @@ static void wacom_remove(struct hid_device *hdev)
 static int wacom_resume(struct hid_device *hdev)
 {
 	struct wacom *wacom = hid_get_drvdata(hdev);
-	struct wacom_features *features = &wacom->wacom_wac.features;
 
 	mutex_lock(&wacom->lock);
 
 	/* switch to wacom mode first */
-	wacom_query_tablet_data(hdev, features);
+	_wacom_query_tablet_data(wacom);
 	wacom_led_control(wacom);
 
 	mutex_unlock(&wacom->lock);
@@ -2540,4 +2623,4 @@ module_hid_driver(wacom_driver);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
+MODULE_LICENSE("GPL");

drivers/hid/wacom_wac.c

@@ -43,6 +43,8 @@ static void wacom_report_numbered_buttons(struct input_dev *input_dev,
 
 static int wacom_numbered_button_to_key(int n);
 
+static void wacom_update_led(struct wacom *wacom, int button_count, int mask,
+			     int group);
 /*
  * Percent of battery capacity for Graphire.
  * 8th value means AC online and show 100% capacity.
@@ -1192,6 +1194,166 @@ static int wacom_wac_finger_count_touches(struct wacom_wac *wacom)
 	return count;
 }
 
+static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom)
+{
+	const int pen_frame_len = 14;
+	const int pen_frames = 7;
+
+	struct input_dev *pen_input = wacom->pen_input;
+	unsigned char *data = wacom->data;
+	int i;
+
+	wacom->serial[0] = get_unaligned_le64(&data[99]);
+	wacom->id[0]     = get_unaligned_le16(&data[107]);
+	if (wacom->serial[0] >> 52 == 1) {
+		/* Add back in missing bits of ID for non-USI pens */
+		wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF;
+	}
+	wacom->tool[0]   = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0]));
+
+	for (i = 0; i < pen_frames; i++) {
+		unsigned char *frame = &data[i*pen_frame_len + 1];
+		bool valid = frame[0] & 0x80;
+		bool prox = frame[0] & 0x40;
+		bool range = frame[0] & 0x20;
+
+		if (!valid)
+			continue;
+
+		if (range) {
+			input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1]));
+			input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3]));
+			input_report_abs(pen_input, ABS_TILT_X, frame[7]);
+			input_report_abs(pen_input, ABS_TILT_Y, frame[8]);
+			input_report_abs(pen_input, ABS_Z, get_unaligned_le16(&frame[9]));
+			input_report_abs(pen_input, ABS_WHEEL, get_unaligned_le16(&frame[11]));
+		}
+		input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5]));
+		input_report_abs(pen_input, ABS_DISTANCE, range ? frame[13] : wacom->features.distance_max);
+
+		input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x01);
+		input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02);
+		input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04);
+
+		input_report_key(pen_input, wacom->tool[0], prox);
+		input_event(pen_input, EV_MSC, MSC_SERIAL, wacom->serial[0]);
+		input_report_abs(pen_input, ABS_MISC,
+				 wacom_intuos_id_mangle(wacom->id[0])); /* report tool id */
+
+		wacom->shared->stylus_in_proximity = prox;
+
+		input_sync(pen_input);
+	}
+}
+
+static void wacom_intuos_pro2_bt_touch(struct wacom_wac *wacom)
+{
+	const int finger_touch_len = 8;
+	const int finger_frames = 4;
+	const int finger_frame_len = 43;
+
+	struct input_dev *touch_input = wacom->touch_input;
+	unsigned char *data = wacom->data;
+	int num_contacts_left = 5;
+	int i, j;
+
+	for (i = 0; i < finger_frames; i++) {
+		unsigned char *frame = &data[i*finger_frame_len + 109];
+		int current_num_contacts = frame[0] & 0x7F;
+		int contacts_to_send;
+
+		if (!(frame[0] & 0x80))
+			continue;
+
+		/*
+		 * First packet resets the counter since only the first
+		 * packet in series will have non-zero current_num_contacts.
+		 */
+		if (current_num_contacts)
+			wacom->num_contacts_left = current_num_contacts;
+
+		contacts_to_send = min(num_contacts_left, wacom->num_contacts_left);
+
+		for (j = 0; j < contacts_to_send; j++) {
+			unsigned char *touch = &frame[j*finger_touch_len + 1];
+			int slot = input_mt_get_slot_by_key(touch_input, touch[0]);
+			int x = get_unaligned_le16(&touch[2]);
+			int y = get_unaligned_le16(&touch[4]);
+			int w = touch[6] * input_abs_get_res(touch_input, ABS_MT_POSITION_X);
+			int h = touch[7] * input_abs_get_res(touch_input, ABS_MT_POSITION_Y);
+
+			if (slot < 0)
+				continue;
+
+			input_mt_slot(touch_input, slot);
+			input_mt_report_slot_state(touch_input, MT_TOOL_FINGER, touch[1] & 0x01);
+			input_report_abs(touch_input, ABS_MT_POSITION_X, x);
+			input_report_abs(touch_input, ABS_MT_POSITION_Y, y);
+			input_report_abs(touch_input, ABS_MT_TOUCH_MAJOR, max(w, h));
+			input_report_abs(touch_input, ABS_MT_TOUCH_MINOR, min(w, h));
+			input_report_abs(touch_input, ABS_MT_ORIENTATION, w > h);
+		}
+
+		input_mt_sync_frame(touch_input);
+
+		wacom->num_contacts_left -= contacts_to_send;
+		if (wacom->num_contacts_left <= 0) {
+			wacom->num_contacts_left = 0;
+			wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
+		}
+	}
+
+	input_report_switch(touch_input, SW_MUTE_DEVICE, !(data[281] >> 7));
+	input_sync(touch_input);
+}
+
+static void wacom_intuos_pro2_bt_pad(struct wacom_wac *wacom)
+{
+	struct input_dev *pad_input = wacom->pad_input;
+	unsigned char *data = wacom->data;
+
+	int buttons = (data[282] << 1) | ((data[281] >> 6) & 0x01);
+	int ring = data[285];
+	int prox = buttons | (ring & 0x80);
+
+	wacom_report_numbered_buttons(pad_input, 9, buttons);
+
+	input_report_abs(pad_input, ABS_WHEEL, (ring & 0x80) ? (ring & 0x7f) : 0);
+
+	input_report_key(pad_input, wacom->tool[1], prox ? 1 : 0);
+	input_report_abs(pad_input, ABS_MISC, prox ? PAD_DEVICE_ID : 0);
+	input_event(pad_input, EV_MSC, MSC_SERIAL, 0xffffffff);
+
+	input_sync(pad_input);
+}
+
+static void wacom_intuos_pro2_bt_battery(struct wacom_wac *wacom)
+{
+	unsigned char *data = wacom->data;
+
+	bool chg = data[284] & 0x80;
+	int battery_status = data[284] & 0x7F;
+
+	wacom_notify_battery(wacom, battery_status, chg, 1, chg);
+}
+
+static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)
+{
+	unsigned char *data = wacom->data;
+
+	if (data[0] != 0x80) {
+		dev_dbg(wacom->pen_input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
+		return 0;
+	}
+
+	wacom_intuos_pro2_bt_pen(wacom);
+	wacom_intuos_pro2_bt_touch(wacom);
+	wacom_intuos_pro2_bt_pad(wacom);
+	wacom_intuos_pro2_bt_battery(wacom);
+	return 0;
+}
+
 static int wacom_24hdt_irq(struct wacom_wac *wacom)
 {
 	struct input_dev *input = wacom->touch_input;
@@ -1446,7 +1608,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 	return 0;
 }
 
-static int wacom_equivalent_usage(int usage)
+int wacom_equivalent_usage(int usage)
 {
 	if ((usage & HID_USAGE_PAGE) == WACOM_HID_UP_WACOMDIGITIZER) {
 		int subpage = (usage & 0xFF00) << 8;
@@ -1473,6 +1635,16 @@ static int wacom_equivalent_usage(int usage)
 		return subpage | subusage;
 	}
 
+	if ((usage & HID_USAGE_PAGE) == WACOM_HID_UP_WACOMTOUCH) {
+		int subpage = (usage & 0xFF00) << 8;
+		int subusage = (usage & 0xFF);
+
+		if (subpage == HID_UP_UNDEFINED)
+			subpage = WACOM_HID_SP_DIGITIZER;
+
+		return subpage | subusage;
+	}
+
 	return usage;
 }
 
@@ -1552,12 +1724,14 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
 		wacom_map_usage(input, usage, field, EV_ABS, ABS_Z, 0);
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
+	case WACOM_HID_WD_BUTTONCENTER:
+		wacom->generic_has_leds = true;
+		/* fall through */
 	case WACOM_HID_WD_BUTTONHOME:
 	case WACOM_HID_WD_BUTTONUP:
 	case WACOM_HID_WD_BUTTONDOWN:
 	case WACOM_HID_WD_BUTTONLEFT:
 	case WACOM_HID_WD_BUTTONRIGHT:
-	case WACOM_HID_WD_BUTTONCENTER:
 		wacom_map_usage(input, usage, field, EV_KEY,
 				wacom_numbered_button_to_key(features->numbered_buttons),
 				0);
@@ -1565,7 +1739,17 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
 	case WACOM_HID_WD_TOUCHONOFF:
-		wacom_map_usage(input, usage, field, EV_SW, SW_MUTE_DEVICE, 0);
+		/*
+		 * This usage, which is used to mute touch events, comes
+		 * from the pad packet, but is reported on the touch
+		 * interface. Because the touch interface may not have
+		 * been created yet, we cannot call wacom_map_usage(). In
+		 * order to process this usage when we receive it, we set
+		 * the usage type and code directly.
+		 */
+		wacom_wac->has_mute_touch_switch = true;
+		usage->type = EV_SW;
+		usage->code = SW_MUTE_DEVICE;
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
 	case WACOM_HID_WD_TOUCHSTRIP:
@@ -1580,6 +1764,10 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
 		wacom_map_usage(input, usage, field, EV_ABS, ABS_WHEEL, 0);
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
+	case WACOM_HID_WD_TOUCHRINGSTATUS:
+		wacom_map_usage(input, usage, field, EV_ABS, ABS_WHEEL, 0);
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
 	}
 
 	switch (equivalent_usage & 0xfffffff0) {
@@ -1622,17 +1810,40 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 	struct input_dev *input = wacom_wac->pad_input;
 	struct wacom_features *features = &wacom_wac->features;
 	unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
+	int i;
+
+	/*
+	 * Avoid reporting this event and setting inrange_state if this usage
+	 * hasn't been mapped.
+	 */
+	if (!usage->type)
+		return;
 
 	if (wacom_equivalent_usage(field->physical) == HID_DG_TABLETFUNCTIONKEY) {
+		if (usage->hid != WACOM_HID_WD_TOUCHRING)
 			wacom_wac->hid_data.inrange_state |= value;
 	}
 
 	switch (equivalent_usage) {
 	case WACOM_HID_WD_TOUCHRINGSTATUS:
+		if (!value)
+			input_event(input, usage->type, usage->code, 0);
 		break;
 
+	case WACOM_HID_WD_TOUCHONOFF:
+		if (wacom_wac->shared->touch_input) {
+			input_report_switch(wacom_wac->shared->touch_input,
+					    SW_MUTE_DEVICE, !value);
+			input_sync(wacom_wac->shared->touch_input);
+		}
+		break;
+
+	case WACOM_HID_WD_BUTTONCENTER:
+		for (i = 0; i < wacom->led.count; i++)
+			wacom_update_led(wacom, features->numbered_buttons,
+					 value, i);
+		 /* fall through*/
 	default:
-		features->input_event_flag = true;
 		input_event(input, usage->type, usage->code, value);
 		break;
 	}
@@ -1670,20 +1881,15 @@ static void wacom_wac_pad_report(struct hid_device *hdev,
 {
 	struct wacom *wacom = hid_get_drvdata(hdev);
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
-	struct wacom_features *features = &wacom_wac->features;
 	struct input_dev *input = wacom_wac->pad_input;
 	bool active = wacom_wac->hid_data.inrange_state != 0;
 
 	/* report prox for expresskey events */
 	if (wacom_equivalent_usage(report->field[0]->physical) == HID_DG_TABLETFUNCTIONKEY) {
-		features->input_event_flag = true;
 		input_event(input, EV_ABS, ABS_MISC, active ? PAD_DEVICE_ID : 0);
-	}
-
-	if (features->input_event_flag) {
-		features->input_event_flag = false;
 		input_sync(input);
 	}
+
 }
 
 static void wacom_wac_pen_usage_mapping(struct hid_device *hdev,
@@ -2058,8 +2264,10 @@ static void wacom_wac_finger_pre_report(struct hid_device *hdev,
 
 		for (j = 0; j < field->maxusage; j++) {
 			struct hid_usage *usage = &field->usage[j];
+			unsigned int equivalent_usage =
+				wacom_equivalent_usage(usage->hid);
 
-			switch (usage->hid) {
+			switch (equivalent_usage) {
 			case HID_GD_X:
 			case HID_GD_Y:
 			case HID_DG_WIDTH:
@@ -2068,7 +2276,7 @@ static void wacom_wac_finger_pre_report(struct hid_device *hdev,
 			case HID_DG_INRANGE:
 			case HID_DG_INVERT:
 			case HID_DG_TIPSWITCH:
-				hid_data->last_slot_field = usage->hid;
+				hid_data->last_slot_field = equivalent_usage;
 				break;
 			case HID_DG_CONTACTCOUNT:
 				hid_data->cc_report = report->id;
@@ -2123,7 +2331,7 @@ void wacom_wac_usage_mapping(struct hid_device *hdev,
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
 	struct wacom_features *features = &wacom_wac->features;
 
-	/* currently, only direct devices have proper hid report descriptors */
+	if (WACOM_DIRECT_DEVICE(field))
 		features->device_type |= WACOM_DEVICETYPE_DIRECT;
 
 	if (WACOM_PAD_FIELD(field))
@@ -2142,6 +2350,9 @@ void wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
 	if (wacom->wacom_wac.features.type != HID_GENERIC)
 		return;
 
+	if (value > field->logical_maximum || value < field->logical_minimum)
+		return;
+
 	if (WACOM_PAD_FIELD(field)) {
 		wacom_wac_pad_battery_event(hdev, field, usage, value);
 		if (wacom->wacom_wac.pad_input)
@@ -2669,6 +2880,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 			sync = wacom_intuos_irq(wacom_wac);
 		break;
 
+	case INTUOSP2_BT:
+		sync = wacom_intuos_pro2_bt_irq(wacom_wac, len);
+		break;
+
 	case TABLETPC:
 	case TABLETPCE:
 	case TABLETPC2FG:
@@ -2779,8 +2994,6 @@ void wacom_setup_device_quirks(struct wacom *wacom)
 	struct wacom_features *features = &wacom->wacom_wac.features;
 
 	/* The pen and pad share the same interface on most devices */
-	if (features->numbered_buttons > 0)
-		features->device_type |= WACOM_DEVICETYPE_PAD;
 	if (features->type == GRAPHIRE_BT || features->type == WACOM_G4 ||
 	    features->type == DTUS ||
 	    (features->type >= INTUOS3S && features->type <= WACOM_MO)) {
@@ -2840,6 +3053,13 @@ void wacom_setup_device_quirks(struct wacom *wacom)
 	if (features->type == REMOTE)
 		features->device_type = WACOM_DEVICETYPE_PAD;
 
+	if (features->type == INTUOSP2_BT) {
+		features->device_type |= WACOM_DEVICETYPE_PEN |
+					 WACOM_DEVICETYPE_PAD |
+					 WACOM_DEVICETYPE_TOUCH;
+		features->quirks |= WACOM_QUIRK_BATTERY;
+	}
+
 	switch (features->type) {
 	case PL:
 	case DTU:
@@ -2986,6 +3206,7 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
 	case INTUOSPL:
 	case INTUOS5S:
 	case INTUOSPS:
+	case INTUOSP2_BT:
 		input_set_abs_params(input_dev, ABS_DISTANCE, 0,
 				      features->distance_max,
 				      features->distance_fuzz, 0);
@@ -3094,6 +3315,27 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
 	}
 
 	switch (features->type) {
+	case INTUOSP2_BT:
+		input_dev->evbit[0] |= BIT_MASK(EV_SW);
+		__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
+
+		if (wacom_wac->shared->touch->product == 0x361) {
+			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+					     0, 12440, 4, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+					     0, 8640, 4, 0);
+		}
+		else if (wacom_wac->shared->touch->product == 0x360) {
+			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+					     0, 8960, 4, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+					     0, 5920, 4, 0);
+		}
+		input_abs_set_res(input_dev, ABS_MT_POSITION_X, 40);
+		input_abs_set_res(input_dev, ABS_MT_POSITION_X, 40);
+
+		/* fall through */
+
 	case INTUOS5:
 	case INTUOS5L:
 	case INTUOSPM:
@@ -3290,6 +3532,9 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 {
 	struct wacom_features *features = &wacom_wac->features;
 
+	if ((features->type == HID_GENERIC) && features->numbered_buttons > 0)
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+
 	if (!(features->device_type & WACOM_DEVICETYPE_PAD))
 		return -ENODEV;
 
@@ -3391,6 +3636,7 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 	case INTUOSPL:
 	case INTUOS5S:
 	case INTUOSPS:
+	case INTUOSP2_BT:
 		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
 		break;
 
@@ -3949,6 +4195,12 @@ static const struct wacom_features wacom_features_0x343 =
 	  DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
 	  WACOM_DTU_OFFSET, WACOM_DTU_OFFSET,
 	  WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
+static const struct wacom_features wacom_features_0x360 =
+	{ "Wacom Intuos Pro M", 44800, 29600, 8191, 63,
+	  INTUOSP2_BT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 9, .touch_max = 10 };
+static const struct wacom_features wacom_features_0x361 =
+	{ "Wacom Intuos Pro L", 62200, 43200, 8191, 63,
+	  INTUOSP2_BT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 9, .touch_max = 10 };
 
 static const struct wacom_features wacom_features_HID_ANY_ID =
 	{ "Wacom HID", .type = HID_GENERIC, .oVid = HID_ANY_ID, .oPid = HID_ANY_ID };
@@ -4115,6 +4367,8 @@ const struct hid_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x33D) },
 	{ USB_DEVICE_WACOM(0x33E) },
 	{ USB_DEVICE_WACOM(0x343) },
+	{ BT_DEVICE_WACOM(0x360) },
+	{ BT_DEVICE_WACOM(0x361) },
 	{ USB_DEVICE_WACOM(0x4001) },
 	{ USB_DEVICE_WACOM(0x4004) },
 	{ USB_DEVICE_WACOM(0x5000) },
@@ -4123,6 +4377,7 @@ const struct hid_device_id wacom_ids[] = {
 
 	{ USB_DEVICE_WACOM(HID_ANY_ID) },
 	{ I2C_DEVICE_WACOM(HID_ANY_ID) },
+	{ BT_DEVICE_WACOM(HID_ANY_ID) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, wacom_ids);

drivers/hid/wacom_wac.h

@@ -12,8 +12,8 @@
 #include <linux/types.h>
 #include <linux/hid.h>
 
-/* maximum packet length for USB devices */
-#define WACOM_PKGLEN_MAX	192
+/* maximum packet length for USB/BT devices */
+#define WACOM_PKGLEN_MAX	361
 
 #define WACOM_NAME_MAX		64
 #define WACOM_MAX_REMOTES	5
@@ -72,6 +72,17 @@
 #define WACOM_REPORT_REMOTE		17
 #define WACOM_REPORT_INTUOSHT2_ID	8
 
+/* wacom command report ids */
+#define WAC_CMD_WL_LED_CONTROL          0x03
+#define WAC_CMD_LED_CONTROL             0x20
+#define WAC_CMD_ICON_START              0x21
+#define WAC_CMD_ICON_XFER               0x23
+#define WAC_CMD_ICON_BT_XFER            0x26
+#define WAC_CMD_DELETE_PAIRING          0x20
+#define WAC_CMD_LED_CONTROL_GENERIC     0x32
+#define WAC_CMD_UNPAIR_ALL              0xFF
+#define WAC_CMD_WL_INTUOSP2             0x82
+
 /* device quirks */
 #define WACOM_QUIRK_BBTOUCH_LOWRES	0x0001
 #define WACOM_QUIRK_SENSE		0x0002
@@ -91,6 +102,7 @@
 #define WACOM_HID_SP_DIGITIZER          0x000d0000
 #define WACOM_HID_SP_DIGITIZERINFO      0x00100000
 #define WACOM_HID_WD_DIGITIZER          (WACOM_HID_UP_WACOMDIGITIZER | 0x01)
+#define WACOM_HID_WD_PEN                (WACOM_HID_UP_WACOMDIGITIZER | 0x02)
 #define WACOM_HID_WD_SENSE              (WACOM_HID_UP_WACOMDIGITIZER | 0x36)
 #define WACOM_HID_WD_DIGITIZERFNKEYS    (WACOM_HID_UP_WACOMDIGITIZER | 0x39)
 #define WACOM_HID_WD_SERIALHI           (WACOM_HID_UP_WACOMDIGITIZER | 0x5c)
@@ -104,6 +116,7 @@
 #define WACOM_HID_WD_ACCELEROMETER_Y    (WACOM_HID_UP_WACOMDIGITIZER | 0x0402)
 #define WACOM_HID_WD_ACCELEROMETER_Z    (WACOM_HID_UP_WACOMDIGITIZER | 0x0403)
 #define WACOM_HID_WD_BATTERY_CHARGING   (WACOM_HID_UP_WACOMDIGITIZER | 0x0404)
+#define WACOM_HID_WD_TOUCHONOFF         (WACOM_HID_UP_WACOMDIGITIZER | 0x0454)
 #define WACOM_HID_WD_BATTERY_LEVEL      (WACOM_HID_UP_WACOMDIGITIZER | 0x043b)
 #define WACOM_HID_WD_EXPRESSKEY00       (WACOM_HID_UP_WACOMDIGITIZER | 0x0910)
 #define WACOM_HID_WD_EXPRESSKEYCAP00    (WACOM_HID_UP_WACOMDIGITIZER | 0x0950)
@@ -113,7 +126,6 @@
 #define WACOM_HID_WD_BUTTONLEFT         (WACOM_HID_UP_WACOMDIGITIZER | 0x0993)
 #define WACOM_HID_WD_BUTTONRIGHT        (WACOM_HID_UP_WACOMDIGITIZER | 0x0994)
 #define WACOM_HID_WD_BUTTONCENTER       (WACOM_HID_UP_WACOMDIGITIZER | 0x0995)
-#define WACOM_HID_WD_TOUCHONOFF         (WACOM_HID_UP_WACOMDIGITIZER | 0x0996)
 #define WACOM_HID_WD_FINGERWHEEL        (WACOM_HID_UP_WACOMDIGITIZER | 0x0d03)
 #define WACOM_HID_WD_OFFSETLEFT         (WACOM_HID_UP_WACOMDIGITIZER | 0x0d30)
 #define WACOM_HID_WD_OFFSETTOP          (WACOM_HID_UP_WACOMDIGITIZER | 0x0d31)
@@ -127,6 +139,12 @@
 #define WACOM_HID_UP_G11                0xff110000
 #define WACOM_HID_G11_PEN               (WACOM_HID_UP_G11 | 0x02)
 #define WACOM_HID_G11_TOUCHSCREEN       (WACOM_HID_UP_G11 | 0x11)
+#define WACOM_HID_UP_WACOMTOUCH         0xff000000
+#define WACOM_HID_WT_TOUCHSCREEN        (WACOM_HID_UP_WACOMTOUCH | 0x04)
+#define WACOM_HID_WT_TOUCHPAD           (WACOM_HID_UP_WACOMTOUCH | 0x05)
+#define WACOM_HID_WT_CONTACTMAX         (WACOM_HID_UP_WACOMTOUCH | 0x55)
+#define WACOM_HID_WT_X                  (WACOM_HID_UP_WACOMTOUCH | 0x130)
+#define WACOM_HID_WT_Y                  (WACOM_HID_UP_WACOMTOUCH | 0x131)
 
 #define WACOM_PAD_FIELD(f)	(((f)->physical == HID_DG_TABLETFUNCTIONKEY) || \
 				 ((f)->physical == WACOM_HID_WD_DIGITIZERFNKEYS) || \
@@ -144,7 +162,14 @@
 				 ((f)->physical == HID_DG_FINGER) || \
 				 ((f)->application == HID_DG_TOUCHSCREEN) || \
 				 ((f)->application == WACOM_HID_G9_TOUCHSCREEN) || \
-				 ((f)->application == WACOM_HID_G11_TOUCHSCREEN))
+				 ((f)->application == WACOM_HID_G11_TOUCHSCREEN) || \
+				 ((f)->application == WACOM_HID_WT_TOUCHPAD) || \
+				 ((f)->application == HID_DG_TOUCHPAD))
+
+#define WACOM_DIRECT_DEVICE(f)	(((f)->application == HID_DG_TOUCHSCREEN) || \
+				 ((f)->application == WACOM_HID_WT_TOUCHSCREEN) || \
+				 ((f)->application == HID_DG_PEN) || \
+				 ((f)->application == WACOM_HID_WD_PEN))
 
 enum {
 	PENPARTNER = 0,
@@ -170,6 +195,7 @@ enum {
 	INTUOSPS,
 	INTUOSPM,
 	INTUOSPL,
+	INTUOSP2_BT,
 	WACOM_21UX2,
 	WACOM_22HD,
 	DTK,
@@ -232,7 +258,6 @@ struct wacom_features {
 	int pktlen;
 	bool check_for_hid_type;
 	int hid_type;
-	bool input_event_flag;
 };
 
 struct wacom_shared {
@@ -244,6 +269,7 @@ struct wacom_shared {
 	struct input_dev *touch_input;
 	struct hid_device *pen;
 	struct hid_device *touch;
+	bool has_mute_touch_switch;
 };
 
 struct hid_data {
@@ -300,6 +326,7 @@ struct wacom_wac {
 	int mode_report;
 	int mode_value;
 	struct hid_data hid_data;
+	bool has_mute_touch_switch;
 };
 
 #endif