Commit 27b01b82 authored by James Smart's avatar James Smart Committed by James Bottomley

[SCSI] lpfc 8.3.31: Fixed system crash due to not providing SCSI error-handling host reset handler

Signed-off-by: default avatarAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: default avatarJames Smart <james.smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 93d1379e
......@@ -4958,6 +4958,43 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
return ret;
}
/**
* lpfc_host_reset_handler - scsi_host_template eh_host_reset_handler entry pt
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does host reset to the adaptor port. It brings the HBA
* offline, performs a board restart, and then brings the board back online.
* The lpfc_offline calls lpfc_sli_hba_down which will abort and local
* reject all outstanding SCSI commands to the host and error returned
* back to SCSI mid-level. As this will be SCSI mid-level's last resort
* of error handling, it will only return error if resetting of the adapter
* is not successful; in all other cases, will return success.
*
* Return code :
* 0x2003 - Error
* 0x2002 - Success
**/
static int
lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int rc, ret = SUCCESS;
lpfc_offline_prep(phba);
lpfc_offline(phba);
rc = lpfc_sli_brdrestart(phba);
if (rc)
ret = FAILED;
lpfc_online(phba);
lpfc_unblock_mgmt_io(phba);
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"3172 SCSI layer issued Host Reset Data: x%x\n", ret);
return ret;
}
/**
* lpfc_slave_alloc - scsi_host_template slave_alloc entry point
* @sdev: Pointer to scsi_device.
......@@ -5090,6 +5127,7 @@ struct scsi_host_template lpfc_template = {
.eh_device_reset_handler = lpfc_device_reset_handler,
.eh_target_reset_handler = lpfc_target_reset_handler,
.eh_bus_reset_handler = lpfc_bus_reset_handler,
.eh_host_reset_handler = lpfc_host_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
.slave_destroy = lpfc_slave_destroy,
......
......@@ -3885,6 +3885,7 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
uint16_t cfg_value;
int rc;
/* Reset HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
......@@ -3913,12 +3914,12 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
/* Perform FCoE PCI function reset */
lpfc_sli4_queue_destroy(phba);
lpfc_pci_function_reset(phba);
rc = lpfc_pci_function_reset(phba);
/* Restore PCI cmd register */
pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
return 0;
return rc;
}
/**
......@@ -4010,6 +4011,7 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
uint32_t hba_aer_enabled;
int rc;
/* Restart HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
......@@ -4019,7 +4021,7 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
/* Take PCIe device Advanced Error Reporting (AER) state */
hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
lpfc_sli4_brdreset(phba);
rc = lpfc_sli4_brdreset(phba);
spin_lock_irq(&phba->hbalock);
phba->pport->stopped = 0;
......@@ -4036,7 +4038,7 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
lpfc_hba_down_post(phba);
return 0;
return rc;
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment