b43: reload phy and bss settings after core restarts

b43_op_config and b43_op_bss_info_changed apply many settings by directly
writing to hardware registers. These settings are lost as soon as the core
is restarted and the initvals are reloaded. This was discovered because
restarting hostapd led to the beacon interval getting set to ~33s (see
https://dev.openwrt.org/ticket/8033 for more information).
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/main.c

@@ -320,6 +320,10 @@ static void b43_wireless_core_exit(struct b43_wldev *dev);
 static int b43_wireless_core_init(struct b43_wldev *dev);
 static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev);
 static int b43_wireless_core_start(struct b43_wldev *dev);
+static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_bss_conf *conf,
+				    u32 changed);
 
 static int b43_ratelimit(struct b43_wl *wl)
 {
@@ -3778,14 +3782,24 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	struct ieee80211_conf *conf = &hw->conf;
 	int antenna;
 	int err = 0;
+	bool reload_bss = false;
 
 	mutex_lock(&wl->mutex);
 
+	dev = wl->current_dev;
+
 	/* Switch the band (if necessary). This might change the active core. */
 	err = b43_switch_band(wl, conf->channel);
 	if (err)
 		goto out_unlock_mutex;
+
+	/* Need to reload all settings if the core changed */
+	if (dev != wl->current_dev) {
 		dev = wl->current_dev;
+		changed = ~0;
+		reload_bss = true;
+	}
+
 	phy = &dev->phy;
 
 	if (conf_is_ht(conf))
@@ -3846,6 +3860,9 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
 
+	if (wl->vif && reload_bss)
+		b43_op_bss_info_changed(hw, wl->vif, &wl->vif->bss_conf, ~0);
+
 	return err;
 }
 
@@ -3934,7 +3951,8 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_BEACON_INT &&
 	    (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
 	     b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
-	     b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+	     b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) &&
+	    conf->beacon_int)
 		b43_set_beacon_int(dev, conf->beacon_int);
 
 	if (changed & BSS_CHANGED_BASIC_RATES)
@@ -4702,6 +4720,9 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
  out_mutex_unlock:
 	mutex_unlock(&wl->mutex);
 
+	if (err == 0)
+		b43_op_bss_info_changed(hw, vif, &vif->bss_conf, ~0);
+
 	return err;
 }
 
@@ -4772,6 +4793,9 @@ static int b43_op_start(struct ieee80211_hw *hw)
  out_mutex_unlock:
 	mutex_unlock(&wl->mutex);
 
+	/* reload configuration */
+	b43_op_config(hw, ~0);
+
 	return err;
 }
 
@@ -4928,9 +4952,17 @@ static void b43_chip_reset(struct work_struct *work)
 	if (err)
 		wl->current_dev = NULL; /* Failed to init the dev. */
 	mutex_unlock(&wl->mutex);
-	if (err)
+
+	if (err) {
 		b43err(wl, "Controller restart FAILED\n");
-	else
+		return;
+	}
+
+	/* reload configuration */
+	b43_op_config(wl->hw, ~0);
+	if (wl->vif)
+		b43_op_bss_info_changed(wl->hw, wl->vif, &wl->vif->bss_conf, ~0);
+
 	b43info(wl, "Controller restarted\n");
 }