Commit 2ac9d363 authored by Philippe CORNU's avatar Philippe CORNU Committed by Benjamin Gaignard

dt-bindings: display: stm32: add a 2nd endpoint

ltdc can have up to 2 endpoints:
 - dpi external gpios: for rgb panels or external bridge ICs.
 - dpi internal ios: connected internally to dsi.

Note: Refer to the reference manual to know if the dsi is
present on your device.
Signed-off-by: default avatarPhilippe Cornu <philippe.cornu@st.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarBenjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1509018489-19641-2-git-send-email-philippe.cornu@st.com
parent 0163d1f6
...@@ -10,7 +10,11 @@ ...@@ -10,7 +10,11 @@
- "lcd" for the clock feeding the output pixel clock & IP clock. - "lcd" for the clock feeding the output pixel clock & IP clock.
- resets: reset to be used by the device (defined by use of RCC macro). - resets: reset to be used by the device (defined by use of RCC macro).
Required nodes: Required nodes:
- Video port for RGB output. - Video port for DPI RGB output: ltdc has one video port with up to 2
endpoints:
- for external dpi rgb panel or bridge, using gpios.
- for internal dpi input of the MIPI DSI host controller.
Note: These 2 endpoints cannot be activated simultaneously.
* STMicroelectronics STM32 DSI controller specific extensions to Synopsys * STMicroelectronics STM32 DSI controller specific extensions to Synopsys
DesignWare MIPI DSI host controller DesignWare MIPI DSI host controller
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment