Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes

ARM: i.MX: Fix SSI clock associations for i.MX25/i.MX35

* tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM: clk-imx35: Fix SSI clock registration
  ARM: clk-imx25: Fix SSI clock registration
  + Linux 3.6-rc5

Documentation/ABI/testing/sysfs-bus-pci

@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.

Makefile

 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -6,7 +6,7 @@ config ARM
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

arch/arm/include/asm/dma-mapping.h

@@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 	return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
 }
 
+/*
+ * This can be called during early boot to increase the size of the atomic
+ * coherent DMA pool above the default value of 256KiB. It must be called
+ * before postcore_initcall.
+ */
+extern void __init init_dma_coherent_pool_size(unsigned long size);
+
 /*
  * This can be called during boot to increase the size of the consistent
  * DMA region above it's default value of 2MB. It must be called before the

arch/arm/mach-imx/clk-imx25.c

@@ -222,10 +222,8 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
 	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");

arch/arm/mach-imx/clk-imx35.c

@@ -230,10 +230,8 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
 	/* i.mx35 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");

arch/arm/mach-kirkwood/common.c

@@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void)
 void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
+
+	/*
+	 * Some Kirkwood devices allocate their coherent buffers from atomic
+	 * context. Increase size of atomic coherent pool to make sure such
+	 * the allocations won't fail.
+	 */
+	init_dma_coherent_pool_size(SZ_1M);
 }
 
 int kirkwood_tclk;

arch/arm/mm/dma-mapping.c

@@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
 	vunmap(cpu_addr);
 }
 
+#define DEFAULT_DMA_COHERENT_POOL_SIZE	SZ_256K
+
 struct dma_pool {
 	size_t size;
 	spinlock_t lock;
 	unsigned long *bitmap;
 	unsigned long nr_pages;
 	void *vaddr;
-	struct page *page;
+	struct page **pages;
 };
 
 static struct dma_pool atomic_pool = {
-	.size = SZ_256K,
+	.size = DEFAULT_DMA_COHERENT_POOL_SIZE,
 };
 
 static int __init early_coherent_pool(char *p)
@@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p)
 }
 early_param("coherent_pool", early_coherent_pool);
 
+void __init init_dma_coherent_pool_size(unsigned long size)
+{
+	/*
+	 * Catch any attempt to set the pool size too late.
+	 */
+	BUG_ON(atomic_pool.vaddr);
+
+	/*
+	 * Set architecture specific coherent pool size only if
+	 * it has not been changed by kernel command line parameter.
+	 */
+	if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE)
+		atomic_pool.size = size;
+}
+
 /*
  * Initialise the coherent pool for atomic allocations.
  */
@@ -297,6 +314,7 @@ static int __init atomic_pool_init(void)
 	unsigned long nr_pages = pool->size >> PAGE_SHIFT;
 	unsigned long *bitmap;
 	struct page *page;
+	struct page **pages;
 	void *ptr;
 	int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long);
 
@@ -304,21 +322,31 @@ static int __init atomic_pool_init(void)
 	if (!bitmap)
 		goto no_bitmap;
 
+	pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL);
+	if (!pages)
+		goto no_pages;
+
 	if (IS_ENABLED(CONFIG_CMA))
 		ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page);
 	else
 		ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
 					   &page, NULL);
 	if (ptr) {
+		int i;
+
+		for (i = 0; i < nr_pages; i++)
+			pages[i] = page + i;
+
 		spin_lock_init(&pool->lock);
 		pool->vaddr = ptr;
-		pool->page = page;
+		pool->pages = pages;
 		pool->bitmap = bitmap;
 		pool->nr_pages = nr_pages;
 		pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n",
 		       (unsigned)pool->size / 1024);
 		return 0;
 	}
+no_pages:
 	kfree(bitmap);
 no_bitmap:
 	pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
@@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
 	if (pageno < pool->nr_pages) {
 		bitmap_set(pool->bitmap, pageno, count);
 		ptr = pool->vaddr + PAGE_SIZE * pageno;
-		*ret_page = pool->page + pageno;
+		*ret_page = pool->pages[pageno];
+	} else {
+		pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n"
+			    "Please increase it with coherent_pool= kernel parameter!\n",
+			    (unsigned)pool->size / 1024);
 	}
 	spin_unlock_irqrestore(&pool->lock, flags);
 
 	return ptr;
 }
 
+static bool __in_atomic_pool(void *start, size_t size)
+{
+	struct dma_pool *pool = &atomic_pool;
+	void *end = start + size;
+	void *pool_start = pool->vaddr;
+	void *pool_end = pool->vaddr + pool->size;
+
+	if (start < pool_start || start > pool_end)
+		return false;
+
+	if (end <= pool_end)
+		return true;
+
+	WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n",
+	     start, end - 1, pool_start, pool_end - 1);
+
+	return false;
+}
+
 static int __free_from_pool(void *start, size_t size)
 {
 	struct dma_pool *pool = &atomic_pool;
 	unsigned long pageno, count;
 	unsigned long flags;
 
-	if (start < pool->vaddr || start > pool->vaddr + pool->size)
+	if (!__in_atomic_pool(start, size))
 		return 0;
 
-	if (start + size > pool->vaddr + pool->size) {
-		WARN(1, "freeing wrong coherent size from pool\n");
-		return 0;
-	}
-
 	pageno = (start - pool->vaddr) >> PAGE_SHIFT;
 	count = size >> PAGE_SHIFT;
 
@@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si
 	return 0;
 }
 
+static struct page **__atomic_get_pages(void *addr)
+{
+	struct dma_pool *pool = &atomic_pool;
+	struct page **pages = pool->pages;
+	int offs = (addr - pool->vaddr) >> PAGE_SHIFT;
+
+	return pages + offs;
+}
+
 static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
 {
 	struct vm_struct *area;
 
+	if (__in_atomic_pool(cpu_addr, PAGE_SIZE))
+		return __atomic_get_pages(cpu_addr);
+
 	if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
 		return cpu_addr;
 
@@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
 	return NULL;
 }
 
+static void *__iommu_alloc_atomic(struct device *dev, size_t size,
+				  dma_addr_t *handle)
+{
+	struct page *page;
+	void *addr;
+
+	addr = __alloc_from_pool(size, &page);
+	if (!addr)
+		return NULL;
+
+	*handle = __iommu_create_mapping(dev, &page, size);
+	if (*handle == DMA_ERROR_CODE)
+		goto err_mapping;
+
+	return addr;
+
+err_mapping:
+	__free_from_pool(addr, size);
+	return NULL;
+}
+
+static void __iommu_free_atomic(struct device *dev, struct page **pages,
+				dma_addr_t handle, size_t size)
+{
+	__iommu_remove_mapping(dev, handle, size);
+	__free_from_pool(page_address(pages[0]), size);
+}
+
 static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	    dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
@@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	*handle = DMA_ERROR_CODE;
 	size = PAGE_ALIGN(size);
 
+	if (gfp & GFP_ATOMIC)
+		return __iommu_alloc_atomic(dev, size, handle);
+
 	pages = __iommu_alloc_buffer(dev, size, gfp);
 	if (!pages)
 		return NULL;
@@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 		return;
 	}
 
+	if (__in_atomic_pool(cpu_addr, size)) {
+		__iommu_free_atomic(dev, pages, handle, size);
+		return;
+	}
+
 	if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) {
 		unmap_kernel_range((unsigned long)cpu_addr, size);
 		vunmap(cpu_addr);

arch/x86/xen/mmu.c

@@ -1283,7 +1283,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,
 	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
 
 	args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
-	if (start != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) {
+	if (end != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) {
 		args->op.cmd = MMUEXT_INVLPG_MULTI;
 		args->op.arg1.linear_addr = start;
 	}

arch/x86/xen/p2m.c

@@ -599,7 +599,7 @@ bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_
 	if (p2m_index(set_pfn))
 		return false;
 
-	for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
+	for (pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
 		topidx = p2m_top_index(pfn);
 
 		if (!p2m_top[topidx])

drivers/base/dma-contiguous.c

@@ -250,7 +250,7 @@ int __init dma_declare_contiguous(struct device *dev, unsigned long size,
 		return -EINVAL;
 
 	/* Sanitise input arguments */
-	alignment = PAGE_SIZE << max(MAX_ORDER, pageblock_order);
+	alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
 	base = ALIGN(base, alignment);
 	size = ALIGN(size, alignment);
 	limit &= ~(alignment - 1);

drivers/hid/hid-core.c

@@ -996,7 +996,8 @@ static void hid_process_event(struct hid_device *hid, struct hid_field *field,
 	struct hid_driver *hdrv = hid->driver;
 	int ret;
 
-	hid_dump_input(hid, usage, value);
+	if (!list_empty(&hid->debug_list))
+		hid_dump_input(hid, usage, value);
 
 	if (hdrv && hdrv->event && hid_match_usage(hid, usage)) {
 		ret = hdrv->event(hid, field, usage, value);
@@ -1558,7 +1559,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
- 	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) },
+#if IS_ENABLED(CONFIG_HID_LENOVO_TPKBD)
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) },
+#endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) },

drivers/hid/usbhid/hid-quirks.c

@@ -70,6 +70,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },

drivers/input/keyboard/imx_keypad.c

@@ -358,6 +358,7 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad)
 	/* Inhibit KDI and KRI interrupts. */
 	reg_val = readw(keypad->mmio_base + KPSR);
 	reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+	reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
 	writew(reg_val, keypad->mmio_base + KPSR);
 
 	/* Colums as open drain and disable all rows */
@@ -515,7 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 	input_set_drvdata(input_dev, keypad);
 
 	/* Ensure that the keypad will stay dormant until opened */
+	clk_enable(keypad->clk);
 	imx_keypad_inhibit(keypad);
+	clk_disable(keypad->clk);
 
 	error = request_irq(irq, imx_keypad_irq_handler, 0,
 			    pdev->name, keypad);

drivers/input/serio/i8042-x86ia64io.h

@@ -176,6 +176,20 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"),
 		},
 	},
+	{
+		/* Gigabyte T1005 - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005"),
+		},
+	},
+	{
+		/* Gigabyte T1005M/P - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"),
+		},
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),

drivers/input/tablet/wacom_wac.c

@@ -1848,7 +1848,10 @@ static const struct wacom_features wacom_features_0x2A =
 	{ "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
 	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xF4 =
-	{ "Wacom Cintiq 24HD",    WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
+	{ "Wacom Cintiq 24HD",       WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
+	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0xF8 =
+	{ "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
 	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0x3F =
 	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023,
@@ -2091,6 +2094,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xEF) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_WACOM(0xF4) },
+	{ USB_DEVICE_WACOM(0xF8) },
 	{ USB_DEVICE_WACOM(0xFA) },
 	{ USB_DEVICE_LENOVO(0x6004) },
 	{ }

drivers/input/touchscreen/edt-ft5x06.c

@@ -602,6 +602,7 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
 {
 	if (tsdata->debug_dir)
 		debugfs_remove_recursive(tsdata->debug_dir);
+	kfree(tsdata->raw_buffer);
 }
 
 #else
@@ -843,7 +844,6 @@ static int __devexit edt_ft5x06_ts_remove(struct i2c_client *client)
 	if (gpio_is_valid(pdata->reset_pin))
 		gpio_free(pdata->reset_pin);
 
-	kfree(tsdata->raw_buffer);
 	kfree(tsdata);
 
 	return 0;

drivers/pci/pci-driver.c

@@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi)
 {
 	struct drv_dev_and_id *ddi = _ddi;
 	struct device *dev = &ddi->dev->dev;
+	struct device *parent = dev->parent;
 	int rc;
 
+	/* The parent bridge must be in active state when probing */
+	if (parent)
+		pm_runtime_get_sync(parent);
 	/* Unbound PCI devices are always set to disabled and suspended.
 	 * During probe, the device is set to enabled and active and the
 	 * usage count is incremented.  If the driver supports runtime PM,
@@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi)
 		pm_runtime_set_suspended(dev);
 		pm_runtime_put_noidle(dev);
 	}
+	if (parent)
+		pm_runtime_put(parent);
 	return rc;
 }
 

drivers/pci/pci-sysfs.c

@@ -458,6 +458,40 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 struct device_attribute vga_attr = __ATTR_RO(boot_vga);
 
+static void
+pci_config_pm_runtime_get(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *parent = dev->parent;
+
+	if (parent)
+		pm_runtime_get_sync(parent);
+	pm_runtime_get_noresume(dev);
+	/*
+	 * pdev->current_state is set to PCI_D3cold during suspending,
+	 * so wait until suspending completes
+	 */
+	pm_runtime_barrier(dev);
+	/*
+	 * Only need to resume devices in D3cold, because config
+	 * registers are still accessible for devices suspended but
+	 * not in D3cold.
+	 */
+	if (pdev->current_state == PCI_D3cold)
+		pm_runtime_resume(dev);
+}
+
+static void
+pci_config_pm_runtime_put(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *parent = dev->parent;
+
+	pm_runtime_put(dev);
+	if (parent)
+		pm_runtime_put_sync(parent);
+}
+
 static ssize_t
 pci_read_config(struct file *filp, struct kobject *kobj,
 		struct bin_attribute *bin_attr,
@@ -484,6 +518,8 @@ pci_read_config(struct file *filp, struct kobject *kobj,
 		size = count;
 	}
 
+	pci_config_pm_runtime_get(dev);
+
 	if ((off & 1) && size) {
 		u8 val;
 		pci_user_read_config_byte(dev, off, &val);
@@ -529,6 +565,8 @@ pci_read_config(struct file *filp, struct kobject *kobj,
 		--size;
 	}
 
+	pci_config_pm_runtime_put(dev);
+
 	return count;
 }
 
@@ -549,6 +587,8 @@ pci_write_config(struct file* filp, struct kobject *kobj,
 		count = size;
 	}
 	
+	pci_config_pm_runtime_get(dev);
+
 	if ((off & 1) && size) {
 		pci_user_write_config_byte(dev, off, data[off - init_off]);
 		off++;
@@ -587,6 +627,8 @@ pci_write_config(struct file* filp, struct kobject *kobj,
 		--size;
 	}
 
+	pci_config_pm_runtime_put(dev);
+
 	return count;
 }
 

drivers/pci/pci.c

@@ -1941,6 +1941,7 @@ void pci_pm_init(struct pci_dev *dev)
 	dev->pm_cap = pm;
 	dev->d3_delay = PCI_PM_D3_WAIT;
 	dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
+	dev->d3cold_allowed = true;
 
 	dev->d1_support = false;
 	dev->d2_support = false;

drivers/pci/pcie/portdrv_pci.c

@@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(struct device *dev)
 {
 	return 0;
 }
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+	/* Delay for a short while to prevent too frequent suspend/resume */
+	pm_schedule_suspend(dev, 10);
+	return -EBUSY;
+}
 #else
 #define pcie_port_runtime_suspend	NULL
 #define pcie_port_runtime_resume	NULL
+#define pcie_port_runtime_idle		NULL
 #endif
 
 static const struct dev_pm_ops pcie_portdrv_pm_ops = {
@@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 	.resume_noirq	= pcie_port_resume_noirq,
 	.runtime_suspend = pcie_port_runtime_suspend,
 	.runtime_resume = pcie_port_runtime_resume,
+	.runtime_idle	= pcie_port_runtime_idle,
 };
 
 #define PCIE_PORTDRV_PM_OPS	(&pcie_portdrv_pm_ops)
@@ -200,6 +209,11 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
 		return status;
 
 	pci_save_state(dev);
+	/*
+	 * D3cold may not work properly on some PCIe port, so disable
+	 * it by default.
+	 */
+	dev->d3cold_allowed = false;
 	if (!pci_match_id(port_runtime_pm_black_list, dev))
 		pm_runtime_put_noidle(&dev->dev);
 

drivers/pci/probe.c

@@ -144,15 +144,13 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
 	case PCI_BASE_ADDRESS_MEM_TYPE_32:
 		break;
 	case PCI_BASE_ADDRESS_MEM_TYPE_1M:
-		dev_info(&dev->dev, "1M mem BAR treated as 32-bit BAR\n");
+		/* 1M mem BAR treated as 32-bit BAR */
 		break;
 	case PCI_BASE_ADDRESS_MEM_TYPE_64:
 		flags |= IORESOURCE_MEM_64;
 		break;
 	default:
-		dev_warn(&dev->dev,
-			 "mem unknown type %x treated as 32-bit BAR\n",
-			 mem_type);
+		/* mem unknown type treated as 32-bit BAR */
 		break;
 	}
 	return flags;
@@ -173,9 +171,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	u32 l, sz, mask;
 	u16 orig_cmd;
 	struct pci_bus_region region;
+	bool bar_too_big = false, bar_disabled = false;
 
 	mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
 
+	/* No printks while decoding is disabled! */
 	if (!dev->mmio_always_on) {
 		pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
 		pci_write_config_word(dev, PCI_COMMAND,
@@ -240,8 +240,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			goto fail;
 
 		if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) {
-			dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n",
-				pos);
+			bar_too_big = true;
 			goto fail;
 		}
 
@@ -252,12 +251,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			region.start = 0;
 			region.end = sz64;
 			pcibios_bus_to_resource(dev, res, &region);
+			bar_disabled = true;
 		} else {
 			region.start = l64;
 			region.end = l64 + sz64;
 			pcibios_bus_to_resource(dev, res, &region);
-			dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n",
-				   pos, res);
 		}
 	} else {
 		sz = pci_size(l, sz, mask);
@@ -268,18 +266,23 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		region.start = l;
 		region.end = l + sz;
 		pcibios_bus_to_resource(dev, res, &region);
-
-		dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
 	}
 
- out:
+	goto out;
+
+
+fail:
+	res->flags = 0;
+out:
 	if (!dev->mmio_always_on)
 		pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
 
+	if (bar_too_big)
+		dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", pos);
+	if (res->flags && !bar_disabled)
+		dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
+
 	return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
- fail:
-	res->flags = 0;
-	goto out;
 }
 
 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)

drivers/xen/swiotlb-xen.c

@@ -232,7 +232,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		return ret;
 
 	if (hwdev && hwdev->coherent_dma_mask)
-		dma_mask = hwdev->coherent_dma_mask;
+		dma_mask = dma_alloc_coherent_mask(hwdev, flags);
 
 	phys = virt_to_phys(ret);
 	dev_addr = xen_phys_to_bus(phys);

drivers/xen/xen-pciback/pci_stub.c

@@ -353,16 +353,16 @@ static int __devinit pcistub_init_device(struct pci_dev *dev)
 	if (err)
 		goto config_release;
 
-	dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
-	__pci_reset_function_locked(dev);
-
 	/* We need the device active to save the state. */
 	dev_dbg(&dev->dev, "save state of device\n");
 	pci_save_state(dev);
 	dev_data->pci_saved_state = pci_store_saved_state(dev);
 	if (!dev_data->pci_saved_state)
 		dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
-
+	else {
+		dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
+		__pci_reset_function_locked(dev);
+	}
 	/* Now disable the device (this also ensures some private device
 	 * data is setup before we export)
 	 */